Different networking tools and their function.pptx
- 4. A tool is any hand held instrument or simple piece of implement that you hold in your hands and use to do a particular kind of work.
- 5. 1. Allen Wrench - an L-shaped metal bar with a hexagonal head at each end, used to turn bolts and screws having hexagonal sockets.
- 6. Allen Wrench
- 8. 2. Antistatic Wrist Strap - is an antistatic device used to safely ground a person working on very sensitive electronic equipment, to prevent the buildup of static electricity on their body.
- 11. 3. Wire Stripper - is a small, hand-held device used to strip the electrical insulation from electric wires.
- 12. Wire Stripper
- 13. 4. Soldering Iron - is used to join two or more metal conductors with the support of soldering lead melted around it.
- 14. Soldering Iron
- 15. 5. Desoldering Tool -is a handy tool that sucks molten solder. You can use it to desolder through-hole components on a circuit board or to rework bad solder joints.
- 16. Desoldering Tool
- 18. 6. Flat Screwdriver - used to tighten or loosen negative slotted screws.
- 19. Flat Screwdriver
- 20. 7. Philips Screw Driver -used to tighten or loosen positive slotted screws.
- 22. 8. Multitester -is an electronic measuring instrument that combines several measurement functions in one unit.
- 23. Multitester
- 24. 9. Long Nose Pliers - is used for holding, bending and stretching the lead of electronics component or connecting wire.
- 25. Long Nose Pliers
- 26. 10. Crimper - is a tool used to make cold weld joints between Ethernet cable wires and RJ45 plug.
- 28. Crimper
- 29. 11. Ethernet Cable Tester -is an electronic device used to verify the electrical connections in a signal cable or other wired assembly.
- 33. Directions: Read carefully and write the letter of the correct answer.
- 34. 1. What device is used to safely ground a person working on very sensitive electronic equipment? a) Flash Drive b) Anti-static Wrist Strap c) Wire Stripper d) Crimper
- 35. 2. What tool is used to make cold weld joints between Ethernet cable wire and RJ45 plug? a) Flash Drive b) Anti-static Wrist Strap c) Wire Stripper d) Crimper
- 36. 3. What small, hand held device used to strip electrical insulation from electric wires? a) Flash Drive b) Anti-static Wrist Strap c) Wire Stripper d) Crimper
- 37. 4. What tool is used to drive or fasten positive slotted screws? a) Ethernet Cable Tester b) Philip Screw Driver c) Computer Network d) RJ45
- 38. 5. What electronic device used to verify the electrical connection in an Ethernet cable? a) Ethernet Cable Tester b) Philip Screw Driver c) Computer Network d) RJ45
- 39. Assignment: 1. What is Personal Protective Equipment? 2. Give examples of PPE. Reference: Grade 7/8 Learning Module in TLE (ICT)