DSLR Basics
- 1. 2006-06-01 Introduction to Digital Photography An overview of digital camera technology and basic photographic techniques.
- 2. 2006-06-01 Types of Digital Cameras 3 main classifications - Point and Shoot - Prosumer - Digital SLR
- 3. Exposure A “correct” or “good” exposure occurs when you maintain as much detail as possible in both the very bright parts (highlights) as well as the very dark parts (shadows) of an image. How much of a range in which you can capture detail from light to dark is referred to as the Dynamic Range. Three factors which influence the exposure of your image: - Shutter speed - Aperture - ISO
- 4. Shutter Speed Refers to how long the shutter is open, exposing the image sensor to light. (how long the camera “sees” the picture) Measured in seconds, from 30” down to 1/8000
- 5. Shutter Speed Fast shutter speeds (1/500 and up) are used to stop motion and will freeze the subject.
- 6. Shutter Speed Slow Shutter Speeds (1/60 or slower) can be used to portray movement or speed
- 7. Shutter Speed Very Slow Shutter Speeds (5 sec. or slower) can be used in very low light situations to obtain correct exposure, or achieve dramatic effects.
- 8. Aperture An aperture is defined as a hole or opening through which light is admitted. Inside the camera lens is a system of blades which open and close to increase or decrease the opening through which light passes into the camera
- 9. Aperture Denoted as an f-stop, aperture is represented by numbers like: f/1.8, f/5.6, f/11, etc A smaller # means a wider opening and is referred to as a larger value (ex. a large aperture of 2.0, a small aperture of 22) The wider the opening (larger aperture value), the more light gets in (meaning you can use faster shutter speeds)
- 10. Aperture
- 11. Depth of Field Aperture also controls depth of field (DOF), which refers to how much of your image is in focus. A wide aperture (small #) will give a shallow DOF and can be used to isolate a subject.
- 12. Depth of Field f/2.8 f/16
- 13. ISO Refers to the light sensitivity of the sensor HIGH ISO value means the sensor will be MORE sensitive to light, meaning it will take LESS LIGHT to get the right exposure Similar to Film Speeds in 35mm format Typically ranges from 100-1600 Newer Digital cameras have ranges up to 128000 Using High ISO values causes the sensor to produce much more heat, which creates digital “noise” in images.
- 14. ISO Noise is similar to film grain and causes loss of fine detail in images It is more visible in dark parts of an image and is generally more noticeable when displayed on screen than in print
- 15. White Balance White balance doesn't really affect your exposure, just the appearance of colors in the image Different light sources cast their own colors, which cannot usually be noticed with the naked eye. White Balance is essentially the camera compensating for the color cast of the light in order to reproduce the “correct” colors The color cast of light is referred to as its Color Temperature and is rated in degrees Kelvin
- 16. White Balance
- 17. Basic In-Camera Settings Exposure Modes Auto (sometimes represented by a green square) - fully automatic functioning, “point and shoot” where the camera decides all the settings for you. M or Manual - you decide all settings, nothing automatic. P or Program - only the exposure is automatic, you have control over other settings. Av or A (Aperture priority) - you set aperture and camera decides shutter speed. Tv or S (Shutter speed priority) - you set shutter speed and camera sets aperture. Scene modes - Don’t use them. Once you know what they mean, you can figure out your own settings.
- 18. Metering Modes Center-weighted metering Exposure metering is averaged over the entire frame with emphasis placed on the central area. Used for general and portrait photography.
- 19. Metering Modes Matrix (evaluative) metering A complex metering system whereby a scene is split up into a series of zones. Overall exposure is based on evaluating each zone individually and taking an average of the total light readings.
- 20. Metering Modes Spot metering Spot metering covers just under 4 percent of the viewfinder area. Takes a precise exposure reading at the very center of the frame and disregards the rest. A spot meter is used when a subject is backlit or has bright light upon it and the background is dark -- for example, a performer on stage.
- 21. 2006-06-01 How the digital sensor works How can a 6 megapixel DSLR take a better picture than a 10 megapixel point and shoot? Size of the digital sensor is more important than resulting image size. A digital image is made up of millions of tiny squares - pixels. Essentially, an image is recorded by tiny microlenses (pixels) which make up the camera’s sensor
- 22. 2006-06-01 All pixels are not created equal. - Pixels are analog devices which record light and color data - Larger sensors contain larger pixels, which are much better at collecting this data - Megapixels are a measurement of the final size (dimensions) of the image recorded by camera
- 24. Post Processing and Image Management Photoshop is the industry standard for post-processing, but same ethics apply for photojournalists in digital post-production as in the darkroom. -Excessive cropping -Hand of God -Removing/adding details NO Photoshop work on any images in this class. Image Management (will be VERY useful in this class): Photo Mechanic - relatively inexpensive, easy to use Lightroom – more complicated, but more functionality Picasa - free from Google Bridge - part of Photoshop suite Other suggestions?