JVC DT-V24-G1
0 likes225 views
This document provides specifications for the JVC DT-V24G1 24-inch multi-format LCD monitor. Key features include 3G/Dual Link SDI input capability, 1920x1200 resolution IPS panel with wide viewing angles, waveform and vectorscope functions, gamma preset modes, and audio level meter support for up to 12 channels. The monitor also offers various marker functions, LTC/VITC support, and gold-plated HD/SD-SDI terminals with embedded audio.
JVC DT-V24-G1
- 1. 24” Multi-Format LCD Monitor DT-V24G1 3G and Dual Link equipped SMPTE 424M/425M/372M JVC 10-bit video processing High operating viewing angle Waveform/Vector scope LTC & VITC support Gamma selection Various marker function Audio level meter up to 12ch Vector scope and waveform cannot be displayed at the same time. HIGHLIGHTS (except PC signals) input signals, and offers a double-size display** option and selection of display position or translucence functions. 3G/Dual Link Equipped 3G-SDI Input Format 1080p uncompressed digital video Following signal information can be displayed when a 3G-SDI signal comes in. Waveform* data transmitted at a maximum 3G A-1 Level A mapping structure 1 Detects video, component (except RGB), SDI, DVI (except PC) rate of 60 frames per second at 3 3G A-2 Level A mapping structure 2 brightness signals and displays them with resolution of 360 x 254 for 3G A-3 Level A mapping structure 3 GB/second can be input with one 3G A-4 Level A mapping structure 4 SD signals or resolution of 480 x 254 for HD signals. Besides, it is also HD SDI Input. Dual Link is available 3G B-DS1 Level B data stream 1 possible to perform checks at 3G B-DS2 Level B data stream 2 through two HD SDI inputs. 3G B-DUAL Level B DUAL LINK 100 100 the colour signal level of each 0 0 colour per screen for R/G/B, IPS (In-Plane-Switching) LCD Panel 100 Y/PB/PR, Y/CB/CR. Over-level IPS panels with wide function enables peak brightness viewing angles and low Viewing angles to be checked at a glance. chromatic variation 0 The display allows a double-size display** option, and selection of 100 100 ensure minimal colour change from different 0 0 display position or translucence viewing positions. 178° functions. Waveform Gamma Preset Mode Advanced Audio Level Meter JVC offers various 178° The channel number is displayed in each level bar. And, you can check pre-set gamma modes the status of the audio signal at a glance for Reference Level/Over Level (2.2, 2.35, 2.45, 2.6) 0 dB, three set levels, and peak hold function. to meet your application needs. Channel No. Over Level R M R M Vector Scope* Y Y B B 1 2 G C G C High-quality vector scope allows 3 4 Peak hold simple checking of hue and R M 5 Y 6 saturation of digital video signals. B Hue and saturation of colour signal G C Reference Level 0dB are detected and displayed as Y R M Y R M a vector with resolution of 254 x 254. B B G C G C Compatible with video, *Two display sizes cannot be displayed at the same time. component, SDI (SD/HD), DVI Vector Scope Audio Level Meter **The position is fixed for double-size display.
- 2. DT-V G SERIES HD/SD SDI 24” Multi-Format LCD Monitor Gold-plated 3G/Dual link INPUT TERMINALS ready Specifications DVI-D Model DT-V24G1 Type Multi format LCD monitor Audio In/Out Screen Size Type 24 wide format Aspect Ratio 16:10 Speaker LCD Panel 24" wide, active matrix TFT Stereo Effective Screen Size (W x H) 518.4 x 324 mm (20-1/2" x 12-7/8") Pixels 1920 x 1200 RS-232C Display Colours 16.77 million Viewing Angle Horizontal 178˚ CONTROLS Vertical 178˚ RS-485 In/Out Brightness 400 cd/m2 Contrast Ratio 1000: 1 Make/ Response Time (G to G) 5 ms (TYP) t rigger Horizontal/Vertical Horizontal 31.469 kHz to 75.000 kHz Frequency (PC signals) Vertical 48 Hz - 65 Hz Vector Depending on the signal within the range of these scope frequencies, some signals may not be displayable in which case, "Out of range " is shown. Waveform monitoring Applicable Standard 3G SDI (Ready) : SMPTE424M/SMPTE425M DUAL LINK HD SDI: SMPTE372M Gamma HD SDI: BTA S-004C, SMPTE292M preset SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525 EMBEDDED AUDIO: SMPTE299M, SMPTE272M Audio Output Internal speaker: 1.0 W + 1.0 W Area marker Operating Conditions Operating temperature 5°C to 35°C (41°F to 95°F) Advanced 3G/Dual-link HD monitor Operating humidity Storage temperature 20% to 80% (non condensing) -20°C to 60°C Safety marker with IPS panel Power Requirements Rated Current AC 120/220-240 V, 50/60 Hz 1.15 A (AC 120 V) / 0.67 A (AC 220 – 240 V) Tally lamp FUNCTIONS Dimensions (WxHxD) With desktop stand 564 x 448.6 x 243 mm (22-1/4" x 17-3/4" x 9-5/8") Features excluding protrusions) Without stand 564 x 408 x 99 mm (22-1/4" x 16-1/8" x 4") 1920 x 1200 resolution Weight Including stand 11.6 kg (25.5 lbs.) Time code Wide viewing angle 178°/178° with IPS panel Excluding stand 8.7 kg (19.1 lbs.) 102% colour gamut Provided Accessories AC power cord, power cord holder x 1, CRC error 3G/dual link equipped screw x 2 ( for power cord holder) Circuits that deliver low latency of less than one frame Input/Output Terminals Audio level Waveform monitoring with over level function Video VIDEO (INPUT 1) Input/output of composite signal: meter 2 line, BNC connector x 4, 1 V(p-p), 75 Vector scope with selectable size and position VIDEO (INPUT 2) * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination). Advanced audio level meter up to 12 channels DVI-D (HDCP) DVI-D signal input (compatible with HDCP): Source ID display Exclusive JVC image processing technology DVI-D connector x 1 (compatible with DDC2B) LTC & VITC support COMPO./RGB Input/output of analogue component signal/analogue RGB signal: 1:1 mode Selectable gamma preset modes (GY, B/PB/B-Y, R/PR/R-Y) 1 line, BNC connector x 6 G/Y: 1 V(p-p), 75 (including sync signal) Wide selection of video production functions B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75 Easy-to-operate front panel controls * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) I/P mode Front LED dimmer function EXT.SYNC (CS) Input/output of composite sync signal: 1 line, BNC connector x 2, Stand 0.3 V(p-p) – 4 V(p-p), 75 (tri-level sync, OPERATION INSTALLATION Source ID input by ASCII code negative polarity sync (bi-level), and BB) (including no video signal) (Tilt & height (Red/Green/White colour linked with tally) * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination) adjustable) Information position selectable E. AUDIO HD/SD SDI (IN 1) Digital signal input (compatible with EMBEDDED AUDIO/ VESA 1:1 mode E. AUDIO HD/SD SDI (IN 2) DUAL LINK signals): auto detection, 2 line, BNC connector x 2 E. AUDIO HD/SD SDI Digital signal output (compatible with EMBEDDED AUDIO signals): Gold-plated HD/SD SDI terminals with embedded audio, 1 line switched out, BNC connector x 1 Power (SWITCHED OUT) video and COMPONENT/RGB terminals Audio AUDIO ASSIGN (IN1) Analogue audio signal input: AC DVI-D with HDCP terminal AUDIO ASSIGN (IN2) 2 line, RCA connector x 4, 500 mV (rms), high impedance RS-232C, RS-485 remote AUDIO ASSIGN (MONITOR OUT) Analogue audio signal output: 1 line, RCA connector x 2, 500 mV (rms) Audio speaker built-in External Control REMOTE (MAKE/TRIGGER) RJ-45 x1 (8-pin) Rugged, adjustable stand provided REMOTE (RS-485) RJ-45 x2 (IN/OUT) (8-pin) REMOTE (RS-232C) D-sub(9-pin) x1 Rear Panel Input Format Computer Signals Resolution Frequency When a preset VIDEO Input terminals Signal name Scan system signal comes in, Horizontal Vertical Horizontal (kHz) Vertical (Hz) Video COMPO. /RGB (Analogue 2)*2 E. AUDIO SDI (IN 1, IN DVI-D (HDCP)(Digital VGA60 640 480 31.5 59.9 Non-interlace the signal format Signal name is shown on the IN1, IN2 component/Analogue RGB)*1 SD/HD (1.5G) 3G SDI DUAL LINK component/digital RGB) WVGA60 852 480 31.5 59.9 Non-interlace SVGA60 800 600 37.9 60.3 Non-interlace status display. For NTSC ✓ — — — — — other signals, the XGA60 1024 768 48.4 60.0 Non-interlace PAL ✓ — — — — — WXGA (1280) 1280 768 47.8 60.0 Non-interlace resolution is BW(50Hz/60Hz) ✓ — — — — — WXGA+60 1440 900 55.9 60.0 Non-interlace shown. 480/59.94i, 60i — ✓ ✓ — — ✓ SXGA60 1280 1024 64.0 60.0 Non-interlace WSXGA+60 1680 1050 65.2 60.0 Non-interlace 576/50i — ✓ ✓ — — ✓ UXGA60 1600 1200 75.0 60.0 Non-interlace 480/59.94p, 60p — ✓ — — — ✓ WUXGA60 1920 1200 74.0 60.0 Non-interlace 576/50p — ✓ — — — ✓ 720/60p 1280 720 45.0 60.0 Non-interlace 1080/60p 1920 1080 67.5 60.0 Non-interlace 640 x 480/59.94p, 60p — — — — — ✓ 720/50p 1280 720 37.5 50.0 Non-interlace 720/23.98p, 24p, 25p, 29.97p, 30p — ✓ ✓ ✓ — — 1080/50p 1920 1080 56.25 50.0 Non-interlace 720/50p, 59.94p, 60p — ✓ ✓ ✓ — ✓ 1080/50i, 59.94i, 60i — ✓ ✓ ✓ ✓ ✓ Dimensions 99 (4) 51.9 (2-1/8) VESA mounting holes (Size: 4-M4, depth: 10 mm) 1080/50p, 59.94p, 60p — — — ✓ ✓ ✓ 564 (22-1/4) 1.3 (1/16) 100 448.6 (17-3/4)*/413.6 (16-3/8)** 1035/59.94i*4, 60i*3 — ✓* 3*4 ✓ — — ✓* 3*4 1080/23.98p, 24p, 25p, 29.97p, 30p — ✓ ✓ ✓ ✓ ✓ 1080/23.98psf, 24psf, 29.97psf*4, 30psf*3 — ✓*3*4 ✓*3*4 ✓ ✓ — 1080/25psf — — — ✓ ✓ — 408 (16-1/8) *1: Analog component/analog RGB signals are compatible with G on sync signal, Y on sync signals, and composite sync 117 (4-5/8) 100 signals (CS). The separate sync signal (HS/VS) is not compatible. *2: Compatible with EMBEDDED AUDIO signals. *3: The signal is recognized as 1080/60i, and the status is displayed as “1080/60i.” *4: The signal is recognized as 1080/59.94i, and the status is displayed as “1080/59.94i.” 51 (2-1/8) 300 (11-7/8) * at the higher position 243 (9-5/8) ** at the lower position Unit: mm (inches) Front Panel Simulated TV picture E. & O.E. Design and specifications are subject to change without notice. Printed in Japan All company names and product names may be trademarks or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved. ICN-0393 Copyright © 2010, Victor Company of Japan, Limited (JVC). All Rights Reserved “JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.