Ditek DTK-HL480 Data Sheet
0 likes59 views
The DTK-HL480 surge protective device is designed for 480 VAC single-phase highway lighting systems, featuring a series configuration for optimal surge protection. It protects up to 30 amps and includes weatherproof housing suitable for outdoor installation. The product offers a ten-year limited warranty and comes with specific electrical specifications including a maximum continuous voltage of 550 VAC and peak surge current of 27,000 amps.
Ditek DTK-HL480 Data Sheet
- 1. DTK-HL480 Series-Connected Highway Light Pole Surge Protective Device General Product Specifications DTK-HL480 Product Features • Series connections optimize protection response • Protects 480 VAC single phase power • Compact size and NEMA 4X enclosure ensure installation flexibility • Ten Year Limited Warranty DITEK’s DTK-HL480 SPD is designed to protect 480 VAC highway lighting systems. Its series configuration and oversized ground wire allow optimal response to surges for best protection of overhead lights. The DTK-HL480 protects up to 30 Amp, 480 VAC electrical power for highway lights, making it suitable for use on single or multiple-lamp poles. Sealed components and a weatherproof enclosure allow it to be mounted in any outdoor location. Specifications IEEE Location Category: Category C Protector Type: Series configuration System Voltage: 480 VAC Single Phase (2 L, 2 N, G) MCOV: 550 VAC Maximum Continuous Current: 30 Amps Peak Surge Current: 27,000 Amps Peak Energy: 720 Joules, 2ms Pulse Protection Modes: L-G, N-G 1mA Clamping Level: 910V V.P.R.: 1,900V (IEEE C1 Impulse, 8x20µs, 6kV, 3kA) Operating Frequency: 40Hz – 400Hz Connection: #10 AWG (Line & Neutral), #6 AWG (G), 12” (30.5cm) wiring leads Dimensions: 1.1”H x 3.0”W x 1.6”D (28mm x 76.2mm x 40.6mm) Weight: 0.5lb.. (.227g) Housing: NEMA 4X ABS, weatherproof One DITEK Center 1720 Starkey Road Largo, FL 33771 1-800-753-2345 Technical Support: 1-888-472-6100 www.ditekcorp.com Document: SPS-100069-001 Rev 1 1-10 ©2010 DITEK Corp. Specification Subject to Change