ED2 2 p
0 likes146 views
The ED2 SkidWeigh Series is a compact, heavy duty, fully automatic microprocessor system that measures the load weight on any type of material handling vehicle. It automatically activates when a skid load is picked up, taking 16,000 readings per session to convert the hydraulic pressure to a displayed load weight. The system features a large six digit LED display and is universal for use on vehicles of any make, model, voltage, or lifting capacity.
ED2 2 p
- 1. ED2 SkidWeigh Series The ED2 SkidWeigh Series are general application, compact, heavy duty, fully automatic microprocessor electronic systems that measure the load weigh on any type of material handling vehicle regardless of the vehicle make, model, operating voltage or lifting capacity. Every time a skid load is picked up the increase in hydraulic pressure on the vehicle lifting circuit will automatically activate the “load weighing cycle” at sample rate of 16000 readings per session and convert it to a load weight measurement that is visually presented to the operator via six digit large LED display. Type to enter text Lift Truck On-board Weighing Systems Automatic Load Weight Indicator
- 2. STANDARD PRODUCT SPECIFICATIONS COMPACT SIZE & HEAVY DUTY - DESIGNED FOR MATERIAL HANDLING VEHICLE INTEGRATED VISUAL DATA TECHNOLOGY INC. 3439 Whilabout Terrace, Oakville, Ontario, L6L 0A7 Canada Phone: 905-469-0985 Fax: 905-825-9494 Clear cover, impact resistant Compact PC board Liquid tight fitting for external cable Universal power supply input from 12 to 55 V DC Front cover with seamless foam-in-place gasket assures watertight and dust-tight seal Large six LED digits display Technical Data - Voltage from 12 to 55 V DC - Operating current 60mA - Technology, micro controller - RS-232 port - Readout type, large six LED digits - Bright red display intensity - Enclosure ABS, 120 x 80 x 55 mm - Weight, 0.6kg - Operating temperature -40 C / + 70 C - Pressure Transducer (Swiss Made) - Port connection, male 1/4”-18 NPT - Built in pressure snubber - NEMA 4X protection - Reverse polarity protection - Over voltage protection - Short circuit protection - Housing material, Stainless steel AISI 303 - Weight 95 grams - Installation, unrestricted - Two buttons automatic system calibration - Weighing accuracy, +/- 0.1 to 1% of vehicle lifting capacity - Weighing range up to 50000 lbs or kg - Single weighing channel - Lift-n-weigh load weighing procedure - Graduation 1, 5 and 10 (default 5) Optional Features - Two independent weighing channels - Total load weight - On-board printers - Under utilization monitoring & reporting - Overload visual warning & reporting - Impact detection visual warning - Engine idling monitoring - Safety check monitoring & reporting - Load monitoring in % of lift capacity - Automatic zero weight re-calibration - Wireless web based reports - Enfora modem, FCC ID: MIVGSM0408 - Relay, SPST for external warning