Electrical Installation and Maintenance module 1
- 1. 1st Grading: Electrical Installation and Maintenance Module # 1: Prepare Electrical Supplies, Materials and Tools
- 2. This lesson will discuss the importance of using the right tools and materials for the job. Each tools and materials are precisely designed for a
- 3. Choosing the correct tool and materials will also decrease the amount of effort required to get a job done right without causing damage to either the equipment or the surface being worked on.
- 4. There is no doubt about the fact that electricity is an extremely powerful source of energy which is used for powering machinery, lighting items, tools, devices and other products used by us in
- 5. Learning Objectives: 1. Identify electrical tools and materials according to their functions;
- 6. Learning Objectives: 2. Enumerate the different types of materials according to its uses and functions;
- 7. 3. Conduct an interview to one member from the family to share the experiences about using electrical tools and materials that he/she usually use to fixed, maintain and run your appliances at home.
- 8. Electrical task can be accomplished systematically to save time, effort, and resources. Most of the work cannot be done using bare hands. To do the task, electrical tools or equipment are needed to perform the job
- 9. Electrical Supplies and Materials Electrical materials are developed and constructed for a special purpose such as to: 1. control the flow of current in an electrical circuit;
- 10. Electrical Supplies and Materials 2. carry electrical current from the source to the load or current consuming
- 11. Electrical Supplies and Materials 3. hold and secure wires to its fixtures inside and outside houses and buildings; and
- 12. Electrical Supplies and Materials 4. protect the houses, buildings, appliances’ and instruments from any destruction and damage.
- 13. The following are the most commonly used electrical supplies and materials:
- 14. 1. Electrical Wires - is used in electrical wiring installation. Types of Electrical Wire
- 15. a. Stranded Wire - is made of multiple strands joined together to make a single wire.
- 16. b. Solid Wire – is made of a single strand of copper or aluminum wire.
- 17. 2. Convenience Outlet - a device that acts as a convenient source of electrical energy for current consuming appliances. It is where the male plug of an appliance is inserted and usually fastened on the wall or connected in an extension cord. It maybe single, duplex, triplex or multiplex.
- 18. Types of Convenience Outlet a. Surface Convenience Outlet b. Flush Convenience Outlet
- 19. -a device inserted to a convenience outlet to conduct electric current. A flat cord is attached to it on one end and the other end is connected to a current consuming instrument or appliances. 3. Male Plug
- 20. 4. Lamp holders – devices that hold and protect the lamp and are also called as – Lamp Sockets/Receptacles.
- 21. 5. Switch – a device that connects and disconnects the flow of electric current in a circuit. There are many shapes, designs,
- 22. - a circuit protective device that automatically blows and cut the current when and over load or short circuit happens. 6. Fuse
- 23. - a protective device used to automatically blow and cuts the current when trouble in the circuit such as short circuit or overload occurs. 7. Circuit Breaker
- 24. 8. Flat Cord - is a duplex stranded wire used for temporary wiring installation and commonly used in extension cord assembly. It comes in a roll of 150 meters and with sizes of gauge # 18 and gauge # 16 awg (American wire gauge ).
- 25. - an octagonal shaped electrical material where the connections or joints of wires are being done. It is also where the flush type lamp holder is attached. This could be made of metal or plastic (PVC) Polyvinylchloride. 9. Junction Box
- 26. 10. Utility Box - a rectangular shaped metallic or plastic (PVC) material in which flush type convenience outlet and switch are attached.
- 27. 11. Conduits/Pipes - electrical materials used as the passage of wires for protection and
- 28. 12. Clamps - electrical materials used to hold and anchor electrical conduits in its proper position.
- 29. 13. Connector - used to attach metallic or non-metallic conduit to the junction or utility boxes.
- 30. ELECTRIC AL TOOLS AND EQUIPME NT The following are common electrical tools and equipment needed in the installation of electrical wiring.
- 31. 1. Screwdrivers - these tools are made of steel hardened and tempered at the tip used to loosen or tighten screws with slotted heads. They come in various sizes and shapes. Types of Screwdriver
- 32. a. Standard/Flat Screwdriver - blade tip is wedgeshaped and resembles a negative (-) sign. This is used to drive screws with a single slot ahead
- 33. b. Philips Screwdriver- has a cross tip resembling a positive (+) sign. This is used to drive screws with cross slot heads.
- 34. c. Stubby Screwdriver - comes in either Standard or Philips screwdriver with short shank or blade and a shorted handle used to turn screws in tight space where standard screwdriver cannot be used.
- 35. CREDITS: This presentation template was created by Slidesgo, including icons by Flaticon, and infographics & images by Freepik - could be in the shape of a screwdriver or a wrench. Its function is to drive screw with hexagonal slot head. d. Allen Screwdriver/Wrenc h
- 36. 2. Hammer - these are tools used in driving or pounding and pulling out nails. They are made of hard steel, wood, plastic or rubber. Types of Hammer
- 37. a. Claw Hammer - a hammer with one side of the head split and curved, used for extracting nails.
- 38. b. Mallet(rubber head) - a type of hammer, often made of rubber or sometimes wood, that is smaller than a maul or beetle, and usually has a relatively large head.
- 39. c. Ballpeen Hammer - a hammer with a rounded end opposite the face, a type of peening hammer used in metal workings.
- 40. 3. Pliers – is made from metal with insulators in the handle and are used for cutting, twisting, bending, holding, and gripping wires and cables. Types of Pliers
- 41. a. Combination Pliers (Lineman’s Pliers) - this is used for gripping, holding, and cutting electrical wires and cables and even small nails. They are usually used by linemen in doing heavy tasks.
- 42. b. Side Cutting Pliers - type of pliers is used for Cutting fine, medium and big wires and cables.
- 43. c. Long Nose Pliers - used for cutting and holding fine wires. This can reach tight space or small opening where other pliers cannot reach and also used in making terminal loops of copper wires.
- 44. 4. Wire Stripper - A tool used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16.
- 45. 5. Electrician’s Knife - used by linemen to remove insulation of wire and cables in low and high voltage transmission lines.
- 46. 6. Portable Electric Drill - A small drilling machine with a chuck capacity of ¼‖ to 3/8‖. It is used in making holes on metal sheets and concrete walls.
- 47. 7. Hacksaw - tool is used to cut metal conduit and armored cable.