Electro-Pneumatic Transducer for Process Control

Model T7800 Electro-Pneumatic I/P, E/P Transducer
89
800-334-8422
Features
• The T7800 Series Transducers provide
maximum versatility for precision applications.
• Field Reversible Feature provides output
that is inversely proportional to input signal.
• RFI/EMI Protection eliminates susceptibility
to electromagnetic and radio interference.
• Internal Electronic Feedback and solid
state controlled Piezoelectric Actuator
provide precise control of output pressure
regardless of vibration or position.
• Damping Adjustment for optimum tuning
response.
• Split range operation lets a common signal
source control two or more functions.
• Compact size for use in restricted spaces.
• Various mounting configurations allow
installation flexibility for most applications.
• NEMA 4X, Type 4 Enclosure and IP65
rated for indoor and outdoor installations.
• Canadian Registration Numbers (CRN)
certification for all territories and provinces.
Operating Principles
STANDARD RANGE
The Model T7800 Series converts a DC
input signal to a linear proportional
pneumatic output. It includes the Primary
Converting Section and the pneumatic Relay
Section. The Piezoelectric Ceramic Actuator,
in the Primary Converting Section, functions
as a Flapper. The Flapper and Nozzle work
together to control the signal pressure. The
signal pressure that sets the output pressure
acts on the Upper Control Diaphragm in the
Pneumatic Relay Section. The Lower
Control Diaphragm in the Pneumatic Relay
Section senses the output pressure.
EXTENDED RANGE
In the Extended Range units, an additional
Relay Section amplifies the output pressure.
Model TA7800 Standard Range
B
Model
T7800
BTRANS65 quark 7:B Trans 65-110.qxd 9/1/2006 5:54 PM Page 89
M.S. Jacobs & Associates Pittsburgh, PA USA 800-348-0089 www.msjacobs.com

90
800-334-8422
Model TA7800 Extended Range
Model TT7800 Extended Range
Model TD7800 Extended Range
Model TR7800 Extended Range
Model TT7800 Standard Range
Model TD7800 Standard Range
Model TR7800 Standard Range
Model TR7800 for use with TR Manifold Rack Kit. TR7800 unit
same as TT7800 except terminal block is located on rear.
Model TR7800 for use with TR Manifold Rack Kit. TR7800 unit
same as TT7800 except terminal block is located on rear.
B
Model
T7800

91
800-334-8422
Standard Range Specifications
OUTPUT RANGE
psig
[BAR]
(kPa)
3-15 3-27 6-30
[0.2-1.0] [0.2-1.8] [0.4-2.0]
(20-100) (20-180) (40-200)
Input Range 4-20 mA DC, 0-10 VDC, 1-9 VDC
Supply Pressure1 20-120 32-120 35-120
[1.5-8.0] [2.2-8.0] [2.4-8.0]
(150-800) (220-800) (240-800)
Minimum Span 5 10 10
[0.35] [0.7] [0.7]
(35) (70) (70)
Frequency Response -3 db @ 5 Hz per ISA S26.4.3.1 load configuration A.
Accuracy (ISA S51.1) 0.25% Full Scale Guaranteed
0.15% Full Scale Typical
Hysteresis (ISA S51.1) 0.1% Full Scale
Deadband 0.02% Full Scale
Repeatability (ISA S51.1) 0.1% Full Scale
Position Effect No Measurable Effect
Vibration Effect Less than +1% of Span under the following conditions: 5-15 Hz @ 0.8 inches
constant displacement 15-500 Hz @ 10 Gs.
Reverse Polarity Protection No damage occurs from reversal of normal supply current (4-20 mA) or from
misapplication of up to 60 mA.
RFI/EMI Effect Less than 0.5% of span @ 30 v
/m class 3 Band ABC (20-1000 mHz) per SAMA
PMC 33.1 1978 and less than 0.5% of Span @ 10 v
/m level, to 2 GHz Band per
EN 61000-4-3:1998 +A1 EMC Directive 89/336/EEC European Norms EN 61326
Supply Pressure Effect No Measurable Effect
Temperature Effect [+0.5% +0.04% / o
F Temperature Change] of Span typical
Materials of Construction Body and Housing . . . . . . . . . . . . . . . . . . . . . . . . . .Chromate Treated Aluminum
Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nickel Plated Brass & Sapphire
Trim . . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel, Brass & Zinc Plated Steel
Elastomers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nitrile
Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Epoxy Powder Coating
SET POINT
psig
[BAR]
(kPa)
3 9 15 30
[0.2] [0.6] [1.0] [2.0]
(20) (60) (100) (200)
1
Supply Pressure must be no less than 5 psig, [0.35 BAR], (35 kPa), above maximum output
Maximum Air Consumption All Ranges 3.5 7.0 9.5 13.5
SCFH (.10 m3
/HR) (.20 m3
/HR) (.27 m3
/HR) (.38 m3
/HR)
Flow Rate 2.5 (4.25 m3/
HR) @ 9.0 (15.3 m3
/HR) @
(SCFM) 25 psig, [1.7 BAR], 120 psig, [8.0 BAR],
(170 kPa) supply & OR (800 kPa) supply &
9 psig, [0.6 BAR], 9 psig, [0.6 BAR],
(60 kPa) Output (60 kPa) Output
Temperature Range Operating -40o
F to + 160o
F (-40o
C to + 71.2o
C)
Storage -40o
F to + 180o
F (-40o
C to + 82.2o
C)
Span/Zero Adjustments Screwdriver adjustments located on front of unit
Required Operating Voltages Two Wire Current Input 7.2 VDC @ 20 mA (4-20 mA signal)
Supply Voltages Three Wire Voltage Input 7.2-30 VDC, less than 3 mA
Signal Impedance Three Wire Voltage Input 10 Kilohms
B
Model
T7800

92
800-334-8422
Extended Range Specifications
Input Range 4-20 mA DC, 0-10 VDC, 1-9 VDC
Supply Pressure1 35-150 65-150 125-150
[2.4-10] [4.6-10] [8.8-10]
(240-1000) (460-1000) (880-100)
Minimum Span 12.5 25 50
[0.85] [1.5] [3.0]
(85) (150) (300)
Frequency Response -3 db @ 2 Hz per ISA S26.4.3.1 load configuration A.
Accuracy (ISA S51.1) 0.25% Full Scale Guaranteed
0.15% Full Scale Typical
Hysteresis (ISA S51.1) 0.25% Full Scale
Deadband 0.02% Full Scale
Repeatability (ISA S51.1) 0.1% Full Scale
Position Effect 0.125% @ 90 0
& 0.25% @ 180 0
Vibration Effect Less than +1% of Span under the following conditions: 5-15 Hz @ 0.8 inches
constant displacement 15-500 Hz @ 10 Gs.
Reverse Polarity Protection No damage occurs from reversal of normal supply current (4-20 mA) or from
misapplication of up to 60 mA.
RFI/EMI Effect Less than 0.5% of span @ 30 v
/m class 3 Band ABC (20-1000 mHz) per SAMA
PMC 33.1 1978 and less than 0.5% of Span @ 10 v
/m level, to 2 GHz Band per EN
61000-4-3:1998 +A1 EMC Directive 89/336/EEC European Norms EN 61326
Supply Pressure Effect < 0.1 psig change for 10 psig supply change
Temperature Effect [+0.5% +0.06% / o
F Temperature Change] of Span typical
Materials of Construction Body and Housing . . . . . . . . . . . . . . . . . . . . . . . . . .Chromate Treated Aluminum
Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nickel Plated Brass & Sapphire
Trim . . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel, Brass & Zinc Plated Steel
Elastomers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nitrile
Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Epoxy Powder Coating
OUTPUT RANGE
psig
[BAR]
(kPa)
0-30 0-60 0-120
[0-2.0] [0-4.0] [0-8.0]
(0-200) (0-400) (0-800)
SET POINT
psig
[BAR]
(kPa)
0 15 30 60 120
[0] [1.0] [2.0] [4.0] [8.0]
(0) (100) (200) (400) (800)
Maximum Air Consumption 0-30 psig 3.1 7.8 11.8
SCFH (.09 m3
/HR) (.22 m3
/HR) (.33 m3
/HR)
0-60 psig 1.6 4.7 7.8 13.3
SCFH (0.4 m3
/HR) (.13 m3
/HR) (.22 m3
/HR) (.37 m3
/HR)
0-120 psig 0.5 3.8 7.6 15.1
SCFH (.01 m3
/HR) (.11 m3
/HR) (.21 m3
/HR) (.42 m3
/HR)
Flow Rate (SCFM) 11.0 (18.7 m3
/HR) @ 150 psig, [10 BAR], (1000 kPa)
supply & midscale output
Temperature Range Operating -40o
F to + 160o
F, (-40o
C to + 71.2o
C)
Storage -40o
F to + 180o
F, (-40o
C to + 82.2o
C)
Span/Zero Adjustments Screwdriver adjustments located on front of unit
Required Operating Voltages Two Wire Current Input 7.2 VDC @ 20 mA (4-20 mA signal)
Supply Voltages Three Wire Voltage Input 7.2 - 30 VDC, less than 3 mA
Signal Impedance Three Wire Voltage Input 10 Kilohms
1
Supply Pressure must be no less than 5 psig, [0.35 BAR], (35 kPa), above maximum output
B
Model
T7800

93
800-334-8422
Hazardous Area Specifications
Intrinsically Safe (4-20 mA Only) Division 2
Factory Mutual TDFI7800, TAFI7800 TDFI7800, TAFI7800,
(FM) Approvals Class I, Division 1, Groups C and D; TDFN7800, TAFN7800
Class II, Division 1, Groups E,F and G; Class I, Division 2, Groups A, B, C and D;
Class III, Division 1, Fibers; Suitable for
NEMA 4X Enclosure; Class II, Division 2, Groups F and G;
Temperature Code T4, Tamb = -20 o
C to 65 o
C Class III, Division 2; NEMA 4X Enclosure;
Non-Incendive 4-20 mA, voltage input
units ; Temperature Code T4.
TTFI7800, TRFI7800 TTFI7800, TRFI7800,
Class I, Division 1, Groups C and D; TTFN7800, TRFN7800
Temperature Code T4, Tamb = -20 o
C to 65 o
C Class I, Division 2, Groups A, B, C and D;
Non-Incendive 4-20 mA, voltage input
units; Temperature Code T4.
Canadian Standards TDCI7800, TACI7800 TDCI7800, TTCI7800, TRCI7800
Association (CSA) Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C and D;
Approvals Class II, Division 1, Groups E, F and G; Rated 4-20 mA, 30 VDC maximum;
Type 4 Enclosure; Temperature Code T6.
Rated 4-20 mA, 30 VDC maximum;
Temperature Code T6. Flame-Proof Intrinsically Safe
TTCI7800, TRCI7800 TACI7800
Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C and D;
Rated 4-20 mA, 30VDC maximum; Class II, Division 2, Groups E, F and G;
Temperature Code T6. Type 4 Enclosure;
Rated 4-20 mA, 30 VDC maximum;
Temperature Code T6.
ATEX Approvals TAEI7800, TDEI7800
EEx ia IIB, T4, Tamb = -20o
C to 72o
C
II 1G (T4), II 1D (T85o
C)
IP65 Enclosure
TTEI7800, TREI7800
EEx ia IIB, T4, Tamb = -20o
C to 72o
C
II 1G (T4)
Transducer Parameters
Umax1= 28 V Pi3 = 0.7 W
Imax2= 100 mA Ci4 = 0
Li5 = 0
1
Umax = Max. Voltage 3
Pi = Max. Power
2
Imax = Max. Current 4
Ci = Capacitance
5
Li = Inductance
Approvals are valid when connected
through a Shunt Zener Diode Safety
Barrier meeting the following
parametric requirements:
System Type 1: Single Channel Polarized
Rated: 28.5V Max. 300
Ohm Min.
System Type 2: Dual Channel Polarized
Rated 28.5V Max. 300
Ohm Min. and 10V
Max. 50 Ohm Min.
System Type 3: Dual Channel Polarized
Rated: 28.5V Max. 300
Ohm Min. and 28V Diode
return per channel
Entity Parameters
Vmax1
= 30 VDC Ci3 = O µ F
Imax2
= 200 mA Li4
= O mH
1Vmax = Max. Voltage 3Ci = Capacitance
2Imax = Max. Current 4Li = Inductance
Non-Incendive Field Wiring Parameters
Vmax1
= 30 VDC Ci3 = O µ F
Li4
= O mH
1Vmax = Max. Voltage 3Ci = Capacitance
4Li = Inductance
B
Model
T7800

Catalog Information
Installation
For installation instructions, refer to the Fairchild T7800 Standard
Range Electro-Pneumatic Transducer Installation, Operation and
Maintenance Instructions, IS-50T7800S and the Fairchild T7800
Extended Range Electro-Pneumatic Transducer Installation,
Operation and Maintenance Instructions, IS-50T7800E.
Optional manifolds are available to mount 3, 5, 10 or 15 transducers.
An optional rack kit is available to mount 10 transducers in a standard
19” rack. For more information, see the Fairchild Manifold and Rack
Kit, CS-4000MRKT.
Catalog Number T 7800
Electrical Connections
1/2 NPT Conduit . . . . . . . . . . . . A
Fitting with Pigtail
DIN43650 Connection . . . . . . . . D
Rack Mount . . . . . . . . . . . . . . . . R
Terminal Block . . . . . . . . . . . . . . T
Underwriting Group
Canadian Standards . . . . . . . . . . . . . C
ATEX . . . . . . . . . . . . . . . . . . . . . . . . . E
Factory Mutual . . . . . . . . . . . . . . . . . . F
None (leave blank) . . . . . . . . . . . . . . .
Approval Class
Intrinsically Safe1 . . . . . . . . . . . . . . . . . . . . I
Non-Incendive (Division 2)2 . . . . . . . . . . . . N
None (leave blank) . . . . . . . . . . . . . . . . . . .
Input
4-20 mA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1-5 VDC6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
0-5 VDC 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1-9 VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
0-10 VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
Output
3-15 psig 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01
3-27 psig 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
6-30 psig 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
0-30 psig 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
0-60 psig 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
0-120 psig 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
[0.2-1.0 BAR] 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
[0.2-1.8 BAR] 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
[0.4-2.0 BAR] 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
[0-2.0 BAR] 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
[0-4.0 BAR] 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
[0-8.0 BAR] 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
(20-100 kPa) 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
(20-180 kPa) 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
(40-200 kPa) 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
(0-200 kPa) 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
(0-400 kPa) 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
(0-800 kPa) 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Options
BSPT Thread 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U
1 Intrinsically Safe Approval includes Non-Incendive (Division 2), available on 4-20 mA
units only.
2
Non-Incendive (Division 2) approval on FM voltage input units only
3
Standard Range
4
Extended Range
5
Available on all units EXCEPT Factory Mutual and Canadian Standards Underwriting
Group units.
6
Limited Availability
Mounting Kits
Mounting Bracket: 16799-1
Mounting Bracket: 16893
Mounting Bracket: 19254-1
Model T7800 Transducer Kits
& Accessories
Mounting Bracket Kits ..........16799-1 (included with unit)
16893 (included with unit)
19254-1 (sold separately)
94
800-334-8422
BB
Model
T7800

Electro-Pneumatic Transducer for Process Control

More Related Content

What's hot (19)

Similar to Electro-Pneumatic Transducer for Process Control (20)

Recently uploaded (20)

Electro-Pneumatic Transducer for Process Control