![1. Introduction
This project aims to develop a fundamental piece of software based on the design for manufacture
guidelines and principals which can help to reduce time in the development and manufacturing phase
involved in product development. It is hoped that a comprehensive software-based package will be
produced as a result of the outcome of this research, enabling the user to import a 3D model of a
component into a compatible package and undertake an analysis of the component, with a specific
focus on component features in relation to their suitability of use within the context of the
manufacturing process.
2. Project Background
Cost reduction within the manufacturing process is seen as a vital development in the efficiency of
any modern company due to the stark economic climate in which global companies are now placed.
Losing money in a global competitive market presents the need to increase profits or cut expenses in
order to succeed.[1]
Many companies are being pressurized to manufacture their products with lower
carbon footprint, better design and lower costs. It is therefore essential that a design solution is fully
evaluated from both functional and manufacturing points of view. One approach to this is to develop
a software tool to undertake the manufacturability analysis of a component automatically.
Engineering is often seen as a key activity within the manufacturing process as 70% of the cost of a
product has already been fixed at the end of the engineering phase of this process. This therefore
means that the function and the design of the product has major influences on the manufacturing
process to be selected. From this it is clear to see the close links and cooperation required between
both engineering and manufacturing phases.[3]
This project aims to develop a fundamental piece of
software based on the design for manufacture guidelines and principals which can help to reduce time
in the development and manufacturing phase involved in product development, with the aim of
reducing cost within the design engineering phase where critical decisions affecting the final cost of
the product are reached.[2]](https://image.slidesharecdn.com/dd340987-b414-4b68-8503-dcd89458a2dc-151124114606-lva1-app6892/85/EPSRC-report-short-version-8-320.jpg)
![References
[1] Millar, L.T., (2013), ‘The Cost-Reduction-Consultant: Importance of Cost Reduction’, available at
http://www.the-cost-reduction-consultant.com/ImportanceOfCostReduction.html, accessed 05
August 2013
[2] Boothroyd, G., P. Dewhurst, W. A. Knight (2002) Product Design for Manufacture and Assembly,
Madison Avenue, NY: Marcel Dekker, Inc.
[3] Rembold, U., B. O. Nnaji and A. Storr (1993), Computer Integrated Manufacturing and Engineering,
Wokingham, England: Addison-Wesley Pub. Co](https://image.slidesharecdn.com/dd340987-b414-4b68-8503-dcd89458a2dc-151124114606-lva1-app6892/85/EPSRC-report-short-version-16-320.jpg)
EPSRC report (short version)
- 1. MANUFACTURABILITY ASSESSMENT Using Design for Manufacture Knowledge to Develop Software for a Manufacturability Analysis Tool Principal Researcher: Kerrie Noble Kerrie.noble.2013@uni.strath.ac.uk 4th Year (MEng) Undergraduate Product Design Engineering Student Supervisor: Professor Xiu T Yan x.yan@strath.ac.uk Professor of Mechatronic Systems Technology Director of Space Mechatronic Systems Technology Laboratory (SMeSTech)
- 2. Bibliography Anderson, D.M., (2010), Design for Manufacturability and Concurrent Engineering, New York, NY: Springer Publishing Anderson, D. M., (2013), ‘Half Cost Products’, available at http://www.halfcostproducts.com/, accessed 05 August 2013 Benhabib, B., (2003), Manufacturing: Design, Production, Automation, and Integration, New York, NY: Marcel Dekker Inc. The Boeing Company, (2008), ‘High Speed Machining of Aluminium’, available at https://www.mfg- labs.com/filedownload/Papers_Presentations/High_Speed_Aluminum_Machining_Presentation.pdf, accessed 05 August 2013 Boothroyd, G., (2005) Assembly Automation and Product Design, Second Edition, London: Taylor and Francis Group Boothroyd, G., P. Dewhurst, (2012) ‘Design for Manufacture and Assembly (DFMA®) Product Costing and Simplification’, available at http://www.dfma.com/software/index.html, accessed 05 August 2013 Bralla, J.G., (1999), Design for Manufacturability Handbook, 2 vols, Boston, Massachusetts: The McGraw Hill Companies Inc. Bramble, K. L., (2011), Engineering Design for Manufacturability, 5 vols, Monroe, Georgia: Engineer’s Edge LLC. The Centre for Automation and Intelligent Systems Research, Case Western Reserve University, (date unknown), ‘Design for Manufacture and Assembly’, available at http://dora.eeap.cwru.edu/gcc/dissertation/chap_4.pdf, accessed 05 August 2013 Crow, K., (1998), ‘Design for Manufacturability/Assembly Guidelines’, available at http://www.npd- solutions.com/dfmguidelines.html, accessed 05 August 2013 Custompart.net, (2013), ‘Milling’, available at http://www.custompartnet.com/wu/milling, accessed 05 August 2013, Olney, MD EFunda, (2013), ‘Design of Parts for Milling’, available at http://www.efunda.com/processes/machining/mill_design.cfm, accessed 05 August 2013, Sunnyvale, CA
- 3. First Cut, (2013), ‘CNC Machining Guidelines’, available at http://www.firstcut.eu/gb/DesignGuidelines.aspx?awk=true, accessed 05 August 2013, Telford, Shropshire First Cut, (2013), ‘Threaded Holes Maximum Reach’, available at http://www.firstcut.eu/gb/ThreadedHoles-Reach.aspx?awk=true, accessed 05 August 2013, Telford, Shropshire Geometric Ltd., (2013), ‘Design Guidelines for Machining’, available at http://dfmpro.geometricglobal.com/processes/dfmpro-for-machining/, accessed 05 August 2013, Mumbai, India Giachetti, R. E., (1997) ‘A Decision Support System for Material and Manufacturing Process Selection’, Journal of Intelligent Manufacturing, 9, 265 – 276 Hamidi, M., K. Farahmand, (2008), ‘Developing a Design for Manufacturing Handbook’, Paper 220, IT 302 Kazmar, D., (2011), Applied Plastics Engineering Handbook, Lowell, MA: Elsevier Inc. Kennametal, (2013), ‘Technical Tips’, available at http://www.kennametal.com/kennametal/en/resources/technical-tips.html, accessed 05 August 2013, Fort Mill, SC Pro CNC Inc., (Unknown date), ‘Design Guide’, available at http://procnc.com/images/content/Design_Guide_Rev_C.pdf, accessed 05 August 2013, Bellingham, WA Quick Cut CNC, (2013), ‘Design Guidelines: Things to Keep in Mind’, available at https://quickcutcnc.com/Resources/DesignGuidelines.aspx, accessed 05 August 2013, Atlanta, Georgia Swaminathan, S., (Unknown Year), ‘Basic Machining Tips’, available at https://sharepoint.ecn.purdue.edu/epics/teams/Public%20Documents/Machining%20Tips%20and% 20Steps.pdf, accessed 05 August 2013, Purdue University Watts, S., (2005), ‘Design for Manufacture and Assembly (DFMA)’, available at http://www.dtic.mil/ndia/2005garm/thursday/watts.pdf, accessed 05 August 2013
- 4. Weatherford, (2006), ‘Guidelines for Effective Milling’, available at http://www.weatherford.com/weatherford/groups/web/documents/weatherfordcorp/wft040609.p df, accessed 05 August 2013 Youseffi, K., (unkown year), ‘Design for Manufacturing and Assembly II:Design Guidelines’, Product Design and Manufacturing Mini-curriculum, San José State University
- 5. Table of Figures Fig.2.1 A pie chart showing the associated costs of different phases within the product development process.................................................................................................................................................... 8 Fig.3. 1 A diagram showing the process for interpreting each design guideline in order to gather information suitable for programming.................................................................................................10 Fig.5. 1 A diagram showing the further definition of each design guideline to help produce mapping tables to help the programming process..............................................................................................12 Fig.5.1. 1 An image illustrating the software user interface showing the 3D component which will be used for testing.....................................................................................................................................13
- 6. Table of Contents Abstract................................................................................................................................................... 6 1. Introduction ....................................................................................................................................7 2. Project Background.........................................................................................................................7 2.1 Project Benefits.............................................................................................................................8 2.2 Business Value...............................................................................................................................8 2.3 Project Aims and Objectives .........................................................................................................9 3. Methodology...................................................................................................................................9 4. Preliminary Outcomes ..................................................................................................................10 5. Discussion......................................................................................................................................11 5.1 Future Developments .................................................................................................................12 6. Conclusion.....................................................................................................................................13 6.1 Project Reflection........................................................................................................................14 References ............................................................................................................................................15
- 7. Abstract This project was completed in order to develop a new software analysis tool in order to analyse and optimise 3D components automatically in a hope this would reduce total cost of product development and allow components to be produced with a shorter lead time. The project specifically focused on Design for Manufacture guidelines related to the milling process and compiled these to produce a database of detailed design guidelines. Each design guideline was the interpreted in terms of conditions, values, limitations and relationships so this information could be used to produce an intelligent, reason-based programme. The programme enables a 3D component to be imported, analysed and changed in a simple, quick environment before cost is incurred in changing the component design during the manufacturing phase. This tool therefore promotes concurrent engineering. The developed software will now be tested, debugged and further developed to include design guidelines for other manufacturing processes and tested to ensure ease of use for the operator in terms of the user interface.
- 8. 1. Introduction This project aims to develop a fundamental piece of software based on the design for manufacture guidelines and principals which can help to reduce time in the development and manufacturing phase involved in product development. It is hoped that a comprehensive software-based package will be produced as a result of the outcome of this research, enabling the user to import a 3D model of a component into a compatible package and undertake an analysis of the component, with a specific focus on component features in relation to their suitability of use within the context of the manufacturing process. 2. Project Background Cost reduction within the manufacturing process is seen as a vital development in the efficiency of any modern company due to the stark economic climate in which global companies are now placed. Losing money in a global competitive market presents the need to increase profits or cut expenses in order to succeed.[1] Many companies are being pressurized to manufacture their products with lower carbon footprint, better design and lower costs. It is therefore essential that a design solution is fully evaluated from both functional and manufacturing points of view. One approach to this is to develop a software tool to undertake the manufacturability analysis of a component automatically. Engineering is often seen as a key activity within the manufacturing process as 70% of the cost of a product has already been fixed at the end of the engineering phase of this process. This therefore means that the function and the design of the product has major influences on the manufacturing process to be selected. From this it is clear to see the close links and cooperation required between both engineering and manufacturing phases.[3] This project aims to develop a fundamental piece of software based on the design for manufacture guidelines and principals which can help to reduce time in the development and manufacturing phase involved in product development, with the aim of reducing cost within the design engineering phase where critical decisions affecting the final cost of the product are reached.[2]
- 9. 2.1 Project Benefits There are many benefits in pursuing this project, including both business value and an educational value. The main benefits from the development of such a piece of software are outlined in more detail below; 2.2 Business Value The business value of this project is in the potential monetary and time savings which may be produced during the use of the developed software, this is main objective and deliverable of the project and provides the basis for this investigation. It is hoped this time and monetary saving will be achieved through development of software to help analyse component features and assess their feasibility and cost effectiveness in terms of manufacturing. Reducing the time taken to develop detailed components with correct feature characteristics will ensure efficiency for the manufacturing process and help encourage cooperation and the adaptation of concurrent engineering across the product development process. Compiling a comprehensive list of design for manufacture guidelines with specific constraints and values will be highly beneficial as most design guidelines available can be quite vague. This is especially useful for students who are being introduced to this topic for the first time, or students in their final year who are trying to produce a very detailed product design. This will hopefully reduce their Fig.2.1 A pie chart showing the associated costs of different phases within the product development process.
- 10. development time and help teach them the principals of good design while also taking manufacturing requirements into consideration alongside the design requirement, resulting in better teaching of design principals. 2.3 Project Aims and Objectives With increasing competition from competitors and more awareness and adoption of sustainable manufacturing, many companies are pressurized to manufacture their products with lower carbon footprint, better design and lower costs. It is therefore essential that a design solution is fully evaluated from both functional and manufacturing points of view to ensure the products are manufacturable with a minimum cost and easiness. One approach to this is to develop a software tool to undertake this manufacturability analysis of a component automatically. The main aim of the research was to help to develop an intelligent, rule based reasoning module and test it for a prototype software system for design feature manufacturability analysis that is being developed as part of an ongoing international collaborative research project. Some of the key objectives included; • Reviewing the 4 categories of knowledge required for intelligent reasoning and identification of potential manufacturing problems by studying the knowledge captured by other researchers of the group • Feasibility study of standardizing the rule elicitation and presentation for automatic rule processing and importing into the knowledgebase; • Testing a prototyped dynamic linking library (DLL) system of the above functionality developed by researchers using MS visual C++ version 2008; • Test running and debugging any problems of the DLL; • Write a report to summarize the above work. The above deliverables required the development of modules and testing of a pre-existing program developed by some earlier work by the department. The project also involved implementing geometric reasoning techniques for intelligent manufacturing, problem identification and display. 3. Methodology Outlined below is the main structure which was followed for the completion of the project; - A review of the design for manufacture guidelines, with initial focus given to the milling process. - Identification of conditions, significant values and constraints of features highlighted within the design for manufacture guidelines which have been listed.
- 11. - An analysis of the identified conditions and values which are required and appropriate research to highlight the required values for use in defining the desired component features. - Summary of all collected information gathered into a spread sheet. Software programming using the information gathered with all appropriate conditions, values and constraints. - Testing and analysis of developed software to ensure correct response and use within the desired setting. In order to prepare each Design for Manufacture Guideline for programming it was necessary to translate the statement into a series of conditions, values, manufacturing domains and limitations. The process followed for interpreting each Design for Manufacture Guideline is shown in the diagram below. This approach enabled the software analysis tool to be based on mathematical reasoning and the use of equations rather than values to give the programme more flexibility to cope with complex designs. 4. Preliminary Outcomes Listed below are some of the main outcomes from the initial research conducted into Design for Manufacture Guidelines for the milling process; - 56 Design for Manufacture Guidelines for the Milling process Fig.3. 1 A diagram showing the process for interpreting each design guideline in order to gather information suitable for programming.
- 12. - 99 detailed manufacturing guidelines to be translated for software programming - 4 domains considered within the manufacturing process; - Tooling - Process Planning - Material - Geometry Reasons were provided for why each design guideline should be used as it was felt this would help provide further guidance for the user during the use of the software and provide useful hints which they can take into account in further product development and therefore help improve their overall detailed design-ability. Many of the Design for Manufacture Guidelines identified had to be listed more than once, due to the nature of the design guideline and its ability to be used to provide details for more than one component feature. As 4 main manufacturing domains, as listed above, had been identified this also added to the complexity when interpreting the design guidelines. 5. Discussion Once the output from the initial findings had been analysed, many challenges were highlighted which allowed issues within the research to be addressed to allow further progression towards developing the software analysis tool; One of the main challenges was access to good, trustworthy resources. Design for Manufacture Guidelines have always been vague in nature and open to interpretation from the designer. Although there are a large number of resources stating hundreds of different design guidelines very few of them assign specific values for various features which may be applied to any component. To overcome this issue experience in manufacturing and using these design guidelines were necessary. While completing the required conditional, value and limitation components during the guideline interpretation, it became apparent that some of the design guidelines listed would have to be further defined in terms of the material type being used for the manufacture of the component. The type of material plays a particularly important role within the design of the component. Different materials require different cutting speeds, different minimum material thicknesses, various surface finish requirement and many more important variable tolerances which ultimately affect and change the design of a component.
- 13. The requirement to produce up to 5 mapping tables was established upon completing the initial database of interpreted Design for Manufacture Guidelines. This was mainly due to a programming requirement to ensure flexibility of the operating system. 5.1 Future Developments On completion of the project after 11 weeks there were four key areas identified for future progression and development of the software analysis tool; Testing and analysis of milling guidelines within the tool. The research produced many more guidelines than initially intended and the issues highlighted in the discussion section had to be resolved, this left no time within this project for testing and analysis. The incorporation of Design for Manufacture Guidelines for other manufacturing processes. The aim is to include every manufacturing process within the analysis tool in order to automate the design optimization process for components and to make life easier for the designer. Testing of the interface may be required to ensure the designer is able to understand and navigate around the tool with ease. The tool must be easy to use with no ambiguity in meaning as these are the current problems with the design guidelines which this tool aims to address. The development of the tool into a commercially available programme with possible incorporation in computer product modelling software tools such as ProEngineer and Solidworks. Fig.5. 1 A diagram showing the further definition of each design guideline to help produce mapping tables to help the programming process.
- 14. 6. Conclusion The aim of this project was to develop a fundamental piece of software based on the design for manufacture guidelines and principals which could help to reduce time in the development and manufacturing phase involved in product development. It was hoped that a comprehensive software- based package would be produced as a result of the outcome of this research, enabling the user to import a 3D model of a component into a compatible package and undertake an analysis of the component, with a specific focus on component features in relation to their suitability of use within the context of the manufacturing process. At the end of this project, most of the objectives and aims defined at the outset have been achieved. There is now a comprehensive list of Design for Manufacture guidelines relating to the milling process and the process for placing this information into a software programming format is currently taking place. There were some challenges throughout the duration of the project and these have been discussed and overcome as necessary. However due to some of these issues, the testing and analysis phase of the project was not completed within the project time-frame. The plan is to continue with work on the project to complete this phase in order to produce a prototype of a possible software analysis tool. Fig.5.1. 1 An image illustrating the software user interface showing the 3D component which will be used for testing.
- 15. 6.1 Project Reflection In the three month internship, I have gained a wider knowledge base and skills than I expected especially relating to the complexities associated with developing software. The requirement for the project was a solid background knowledge of the use of Design for Manufacture guidelines and criteria for use and I felt I could easily apply the experience and knowledge I had gained from many classes during the course of my undergraduate degree. The main output of the project, developing an intelligent, reason-based software analysis tool which could analyse and optimise 3D components automatically sounded daunting at first but I have been given an opportunity to consolidate, apply and expand the knowledge which I brought with me from class-based learning. Although the project was not fully completed due to complex issues with programming and how to interpret the gathered information into useable programme code, I feel I have gained a lot from this experience. I have not only built on my design for manufacture guideline knowledge but I now also have an insight into how different professions can collaborate on a project, utilising independent skills to help produce one working outcome, it has been an interesting experience to see how my knowledge can be adapted by a computer scientist in order to produce a tool which can benefit not only business in its industry application, but also students and the potential the tool has to improve the product development process. Having the opportunity to meet with other students, many of whom were postgraduate students completing their dissertation, provided me with some very useful knowledge, it was a good opportunity to speak to them and find out about their work and interests and what some of their experiences had been while completing their dissertation work. Furthermore the chance to become part of the Undergraduate Research Community within Strathclyde was a bonus to the internship, it provided the ability to discuss and share so challenges and problems which may have been occurring, or sharing different project experiences good and bad, this was also a one-off chance to meet with many other students from across the university regardless of what department or faculty they were from. This was a great experience as this rarely happens within the normal student life of the university. Overall the project has provided me with confidence and a stepping-stone on which I can build my dissertation as I plan to complete the project to fulfil the dissertation criteria. Throughout the project I have met many different people, worked in a different environment from what I am used to as an undergraduate student, and I have learnt a lot from every experience during this project. I look forward to utilising this further within my dissertation and long into the future.
- 16. References [1] Millar, L.T., (2013), ‘The Cost-Reduction-Consultant: Importance of Cost Reduction’, available at http://www.the-cost-reduction-consultant.com/ImportanceOfCostReduction.html, accessed 05 August 2013 [2] Boothroyd, G., P. Dewhurst, W. A. Knight (2002) Product Design for Manufacture and Assembly, Madison Avenue, NY: Marcel Dekker, Inc. [3] Rembold, U., B. O. Nnaji and A. Storr (1993), Computer Integrated Manufacturing and Engineering, Wokingham, England: Addison-Wesley Pub. Co