ERP Modules Scope Generic 29 Modules major master, input and output

ERP SCOPE LIST www.dnserp.com

The following are some key business processes (or procedures) which can be managed
using ERP software. In ERP parlance, they are referred as ERP modules. Some of these,
or all of these, modules may be applicable in your organization, depending on the business
requirements. MIS (Management Information System) reports are shown for each module.
The ERP user gets a set of pre-mapped best business practice solutions for their particular
industry. Zaveri has successfully deployed the following modules and procedures in various
organizations. This is a general list of major master, input and output.

1. Security Module

1.1. Masters:
1.1.1. User Manager.
1.1.2. User group master.

1.2. ERP features:
ERP is multi user, multi tasking ERP software. Multi-level security based on User
Group and User Level.
1.3. Create Login id and password for each user.
1.4. Assign permissions. Map each user with menu / submenu.
1.5. Restricting user access with login and password.
1.6. Role based access & password.
1.7. Audit trail: ERP ensures accountability of users. Work done by individual users can
be easily tracked because all transactions capture the users name automatically.
1.8. Automatic Audit Trail helps top management to know who has updated Masters or
transaction and when.
1.9. Each menu and submenu can be locked (allow / deny) including MIS (Management
Information System) reports to individual user in a very user friendly screen with
tree structure and check box facility.

2. Accounts Module – General Ledger Accounts - Blue

2.1. Masters:
2.1.1. Account Group Master.

For more info Email j.zaveri@dnserp.com Page 1 of 25


2.1.2. Subgroup Master.
2.1.3. General Ledger Account Head Master with Tax, Bank, and Cash bifurcation.
2.1.4. Detail Account Master.
2.1.5. Narration Master.
2.1.6. TDS (Tax Deducted at Source) and % fields in the supplier / address (TP) masters.
Automatic posting in GL. ERP will create a JV automatically.

2.2. Transactions:
2.2.1. Cash receipt voucher.
2.2.2. Bank receipt voucher.
2.2.3. Cash payment voucher.
2.2.4. Bank payment voucher.
2.2.5. Service-tax payment (for excise link).
2.2.6. Journal Voucher.
2.2.7. Contra-entry voucher.
2.2.8. Credit Note.
2.2.9. Debit Note.
2.2.10. Expense PO (for service provider, optional).
2.2.11. Expense voucher (for service provider bill booking).
2.2.12. Adjust unlink receipt with open sales invoice.
2.2.13. Adjust unlink payment with open GRN (Purchase bill / expense bill).
2.2.14. Closing balance for master data (debtor, creditor, and GL accounts).
2.2.15. Rate of depreciation (as per company act).
2.2.16. Rate of depreciation (as per I-Tax act).
2.2.17. Asset installations slip.
2.2.18. Asset sale transaction. (For asset register and deprecation register).

2.3. Key MIS reports:
2.3.1. Trial Balance. Option of various kinds of formatting, such as - GL wise Tr. Balance.
Sub-group wise Tr. Balance. Group and GL wise Tr. Balance. Group and sub-group
wise Tr. Balance. (Option of T- format = only closing balance).
2.3.2. Sub-ledger trial balance. (Supplier / customer).



2.3.3. Consolidated reports of multiple locations for one company in Accounts Module.
E.g., ERP gives factory wise or branch wise plus consolidated for the head office.
2.3.4. Cash Book.
2.3.5. Bank Book (supports multiple banks) with receipts, payments & contra filters.
2.3.6. Expense voucher register.
2.3.7. Journal Voucher register.
2.3.8. General Ledger. (Account head wise or all accounts with details under General
Ledger). Filter available for amounts < than, > than and =.
2.3.9. Credit note register.
2.3.10. Debit note register.
2.3.11. Contra-entry register.
2.3.12. Fixed Asset register.
2.3.13. Depreciation schedule (as per company act).
2.3.14. Depreciation schedule (as per Income Tax act).
2.3.15. Profit & Loss account. (GL wise and sub-group wise). For multi-location user can
make consolidated P & L report.
2.3.16. Balance Sheet. (GL wise and sub-group wise).
2.3.17. Bank reconciliation statement.

Exceptional MIS Reports

Dash Board: This will give at a glance the highlights of certain figures to the top
management viz. purchase, sales, money receivable, money payable, bank balance,
etc.

2.4. ERP features:
2.4.1. Automatic posting in respective G. L., from goods inward and sales invoice, etc.
2.4.2. TDS procedure takes care of automatic TDS posting.
2.4.3. Service tax procedure takes care of automatic posting in related excise ledger.
2.4.4. Help of Standard Narration master saves time to enter voucher.
2.4.5. All reports with drill down facility down to transaction level.

3. VAT / Sales Tax Module



Key MIS reports:
3.1. ERP takes care of all VAT (Value Added Tax) / CST (Central Sales Tax) related
procedures and the same is linked with other relevant modules. The same is
customized as per the rules applicable.

Capturing from various transactions taxes details such as Sales Invoice, GRN (Goods
Receipt Note), Sales RGN (Sales Return Goods Note, GIN (Goods Inward Note
material from subcontractor etc.
3.2. Capturing VAT / CST / Service tax components in
3.2.1. PO, GRN, JO, GIN, Exp, PO, Exp. Voucher, etc. Can default from item master.
3.3. Sales Tax – VAT & CST statements
3.4. Link to the GL (General Ledger Accounts).
3.5. Store CST number / TIN number etc. on the masters. In Invoice, ask for TIN
number of consignee and display on invoice.
3.6. C Form tracking – Sales
3.7. C Form tracking – Purchase

4. Excise Module
4.1. Masters:
4.1.1. Opening Balance Entry (For PLA, CENVAT – ‘Input’ & Capital and Service Tax).
4.1.2. Excise Tariff Heading Master.

4.2. Transactions
4.2.1. Excise Debit Entry with GL postings.
4.2.2. GAR 7 for CenVAT.
4.2.3. GAR 7 for Service Tax.
4.2.4. Form ARE 1 for Export items

4.3.1. ER 1 register.
4.3.2. DSA Register.
4.3.3. CenVAT Credit Register (INPUT).
4.3.4. CenVAT Credit Register (CAPITAL Goods).



4.3.5. Service Tax Credit Register.
4.3.6. PLA Register.
4.3.7. Excise Tariff wise sales report.
4.3.8. Rule 4 (5) (A) CenVAT credit. (57 F 4 Register).
4.3.9. Sales rejections register.
4.3.10. Purchase rejection register.

4.4. ERP features:
4.4.1. Company Excise details – Excise registration code number, range, division.
4.4.2. Account master integration – under duties & taxes in GL account.
4.4.3. Capture excise duty, Edu. Cess, SH Cess in excise related purchase and sales
transactions
4.4.4. Debit entry from PLA & Input, ‘Capital & Service Tax (single entry)
4.4.5. Form ARE 1 for (Export) items
4.4.6. ERP features Excise module is tightly integrated with other modules such as
purchase, sales, accounts, etc. . The service tax is availed at the time of payment
automatically. All relevant details captured at the time of creating the sales invoice
automatically such as Excise duty, Cess, Excise Tariff heading. Prepare Annexure VI
– subsidiary Challan (for sending goods) is automated if applicable. In case
materials on which excise duty is applicable, and if it is sent to sub-contractor ERP
prepares the required 57 F4 challan automatically.
4.4.7. Capturing Service Tax at the time of bank / cash payment of advance and after the
bill is received. .

Material Management (MM) Module
This includes the following business processes
· Inventory Management Business process
· Purchase Business process (Local procurement within India)
· MRP (Material Requirement Planning) with drill down to last child level
· Import Purchase Business process

5. Inventory Management Business process



5.1. Masters:
5.1.1. Unit-of-Measurement (UOM) Master.
5.1.2. Category Master / Subcategory Master / Sub-group master.
5.1.3. Item Master.
5.1.3.1. Raw Material (Bought out) Item Master and list.
5.1.3.2. Packing Material Item Master and list.
5.1.3.3. Factory Made (SFG or Semi-Finished) Material Item Master and list for WIP
inventory.
5.1.3.4. Finished Goods Item Master and list.
5.1.4. Main Location Master – (sub-contractor location).
5.1.5. Sub-location master (stores, shop floor) and subcontractor location.

5.2. Transactions:
5.2.1. GRN or Goods Receipt Note. Linked to Stores as well as creditor accounts. .
5.2.2. Stock transfer challan. For transferring material from one location to another
location.
5.2.3. Stock Transfer Challan - material issued to shop floor link to the Work Order as per
BOM. (Optional).
5.2.4. Material Issue Note (MIN) to consume / material from a ‘given’ location.
5.2.5. Stock Adjustment (SAN) to increase or reduce stock from a given location. This
transaction is useful to get match physical inventory with stock reports.
5.2.6. Physical stock slip to enter actual stock in a given location.
5.2.7. Closing balance master entry (as of cut-off date, one time entry).
5.2.8. Conversion process Purchase return for non-excisable goods or Return to Supplier.
RTV. This is linked with the material received and accounts entries are automatically
generated by ERP. This will debit the supplier in supplier ledger. Or User may create
Tax Invoice (sales -for excisable goods)

5.3.1. List of category, sub-category, and sub-group.
5.3.2. GRN register (list) of items under “inward inspection".
5.3.3. Stock Transfer Challan register (STC) - Filter provided for ‘normal’ STC and STC
with Work Order.



5.3.4. MIN (Material issue note) register. (Location wise).
5.3.5. SAN (Stock adjustment note) register. (Location wise).
5.3.6. Stock Statement for all types of material as well as WIP, a given period.
5.3.6.1. With quantity (location wise and category wise filters).
5.3.6.2. With quantity and Rate (location wise and category wise filters).
5.3.7. Item Ledger (location wise)
5.3.7.1. With quantity (location wise and category wise filters).
5.3.7.2. With quantity and Rate (location wise and category wise filters).
5.3.7.3. Item ledger summary gives the stock of material at all locations – Drill down to
ledger for any given location.
5.3.8. Physical stock and system stock (book stock) variance report.
5.3.9. Stock Valuation report. (With option to generate WAR – weighted average rate).
5.3.10. RTV Register (Return to supplier – non-excisable items).
5.3.11. Item List. (With option to select any or all fields from item master).

5.4. ERP features:
5.4.1. Various cost rate stored on Item master if required, such as Weighted Average
Rate, last pure purchase rate, etc.
5.4.2. Conversion Factor (relation between Purchase UOM and Issue UOM). Payment
UOM and Payment conversion factor.
5.4.3. Optional Online link with picture of an item (.JPEG file).
5.4.4. Optional hyperlink with an AutoCAD drawing.
5.4.5. ISO 9000 Facility to keep material in HOLD location – i.e. item under inspection,
QC person can login and enter Accepted / Rejected Quantity to transfer material to
Stores. Separate ledger shows item in Hold, Stores and Rejection location.
5.4.6. Lot number / Batch number / Serial number / heat number tracking of inventory.
(Optional).
5.4.7. For FMCG products user can store Inner Box / Outer Box data for shipping, or
volume / weight of the box on item master. (Optional).
5.4.8. Automatic calculation of landed-cost of item received and updating the same on
master for valuation purpose.
5.4.9. Just-in-time (JIT) inventory management by linking the MRP (material
requirement planning) module and inventory module.



5.4.10. Pending list of returnable items - RTV (return to Supplier with auto debit
feature).
5.4.11. Item wise consumption.
5.4.12. Branch wise / Location wise / Plant wise / wise Stock status.
5.4.13. Expiry / Near Expiry inventory for perishable goods. (Optional).
5.4.14. Calling a given item by different name (alias) because different
customers call with different name. (Optional).
5.4.15. Excess material received can be accepted (Percentage tolerance given in
sub-category master).
5.4.16. Serial No. applicable flag in Item Master
5.4.17. PFD (Process Flow Diagram) selection in Item Master.

6. Purchase & Pre-purchase Module

6.1. Masters:
6.1.1. Supplier Master (Supplier List).
6.1.2. Supplier Type Master.

6.2. Transactions:
6.2.1. Purchase Requisition (Linked further to Purchase enquiry).
6.2.2. Purchase enquiry.
6.2.3. Purchase quotation.
6.2.4. Preparing Purchase Order. This can be saved as .PDF file and email to Supplier.
6.3. Key MIS reports
6.3.1. Purchase requisition Register.
6.3.2. Purchase Order Register.
6.3.3. Purchase Order status Register with optional alert flag – when delivery period
elapsed, P.O. being highlighted.
6.3.4. Creditor Ledger.
6.3.5. Supplier master list.
6.3.6. Supplier Performance Rating / Supplier Rating based on quality, delivery
6.3.7. Warning letter generation based on poor performance/service.



6.4. ERP features
6.4.1. Auto transfer of Rejected Quantities to rejection stores location.
6.4.2. Link to payment voucher with required validation to the GRN (Goods Receipt
Note).
6.4.3. Item specification document as per ISO 9000 requirements can be linked to PO
(.pdf) file; Drawing number, etc. can be shown automatically.
6.4.4. Capturing of Excise, Cess and S & H Education Cess information
6.4.5. Item 'accept / reject' quantity to be put by a separate password - by QC person.
6.4.6. Purchase officer can make PO based on Material Requirement Planning report, or
based on ROL based report.
6.4.7. Purchase Indent ‘Automatic’ alert to Purchase Department.
6.4.8. Purchase Order ‘short-closed’ facility.
6.4.9. Purchase Order Revision Provision. (Amendment).
6.4.10. Purchase Order Expiry Provision (Option).
6.4.11. Make Similar Purchase Order.
6.4.12. One Purchase Order – Multiple GRNs.

7. MRP - Material Requirement Planning Module / Supply Chain Management
(SCM)

This module is applicable for the Finished Goods (products), where the first level
child item is shown.

7.1. Transactions:
7.1.1. Sales Order (Export or Domestic) or Projection based input.
7.1.2. Sales Schedule – from date and to date and quantity given by customer

7.2.1. Material Requirement Plan - MRP based on production indent and link to BOM to
get raw material required (bought out items) based on stock in hand and buffer
stock.
7.2.2. ROL based Material Requirement report (items below Re-Order Level)



7.3. ERP features:
7.3.1. Pre-requisite: Customer Master. Item Master. Customer Master. BOM Master
7.3.2. Purchase Requisition (purchase indent) can be prepared based on the MRP report
– shortage quantity MIS.
7.3.3. MRP based on the ReOrder Level (ROL).
7.3.4. MRP considering stock in hand.
7.3.5. Automatic calculation of ROL depending upon consumption.

8. Import Purchase Module

8.1. Masters:
8.1.1. Foreign supplier Master (Supplier List).
8.1.2. Foreign supplier type Master.

8.2. Transaction:
8.2.1. Import purchase Order for foreign supplier (in foreign currency).
8.2.2. Import GRN (Goods Receipt Note) when material is received from foreign supplier
(in foreign currency).

8.3.1. Import Purchase order register
8.3.2. Import GRN register – supplier wise information
8.3.2.1. Import GRN register – item wise information.

8.4. ERP features:
8.4.1. Capturing custom duty, CVD, Edu. Cess, etc, and other relevant information in
ERP.
8.4.2. Indian Rupees and Foreign currency exchange rate stored at the time of
importing.

9. Job working IN module – Customer’s material received for processing
Subcontractor IN or job-working for customer. Customer gives material.
After processing (say, machining) the same is returned back to customer.



9.1. Masters:
9.1.1. Sub-location master for customer’s material location (separate stores).
9.1.2. Customer master.

9.2. Transaction:
9.2.1. Material Inward Challan. To capture information about when and what quantity
material was received.
9.2.2. Annexure VI Challan (subsidiary Challan)
9.2.3. Labor charges only sales invoice (cum Challan)

9.3. Feature
9.3.1. Linking customer’s material (inward Challan quantity) with sales invoice quantity
9.3.2. Zero value invoice (defective material returned as it is)
9.3.3. Capturing heat code / lot number / serial number etc.

10. ISO 9000 – Quality check

10.1. Quality check for inbound material. The Goods received with respect to
purchase order are kept in a 'HOLD' location or location for material under
inspection. The stores will enter challan quantity and received quantity. The QC
inspector will reopen the GRN with his / her password and enter the accepted
quantity.
10.2. Quality check for outbound material / Finished Products. At the time of
shipping, QC check and relevant certificate can be fetched as standard word
document file.
10.3. Throughout the process production manufacturing process, the output
(production) of each stage is captured and can be issued to next stage after the QC
pass procedure. The quality supervisor has to verify the produced quantity at each
stage until the packing stage, and record the entries in ERP. Rejected material can
be monitored location wise.

11. BOM – Bill of Materials Module



Prerequisite: Item master. (Inventory module).

11.1. Masters
11.1.1. Bill of Materials Master - using user friendly GUI interface (drag-and-
drop).

11.2.1. BOM Master Printout category wise / subcategory wise.
11.2.2. List of Finished Goods item for selected F.G. item.

11.3. ERP features
11.3.1. Save the BOM instantly in MS Excel format showing Father / child
relation up to N level.
11.3.2. BOM Master is used for
11.3.2.1. Production Module Work order is linked to BOM master. Material consumption in
own shop floor and Sub-contractor - during production is linked to BOM.
11.3.2.2. Costing / Estimation - Product cost estimation is linked to BOM master.
11.3.2.3. Material Requirement Planning to compute the shortage quantity the BOM is
exploded automatically.
11.3.3. Automatic tracking of changes in BOM (engineering changes) with auto
Revision Number and revision date.
11.3.4. Add similar BOM feature allows creating a BOM from existing BOM of a
similar product and then saving after minor changes as new BOM – tremendous time
saving feature for large BOM.

12. Cost Sheet Module – preparing estimate

12.1. Masters
12.1.1. Overhead Master.
12.1.2. Export / Domestic Expense Master.
12.1.3. County / currency master.

12.2. Transactions



12.2.1. Enquiry (optional link).
12.2.2. Cost sheet for the product. Raw Material / Packing Material costing /
Labour Material.
12.2.3. Quotation (optional link).

12.3.1. Cost sheet Register.

12.4. ERP features
12.4.1. Costing to arrive at the ex-factory price (can be based on BOM).
12.4.2. Preparing estimate in multiple currency (US $, Euro, etc.).
12.4.3. Option of saving of costing / quotation suggested price with markup
instantly in MS Excel Sheets.

13. PPC – Production Planning & Control Module
For process production. Not applicable for assembly kind of production.
13.1 Masters
13.1.1 Process Flow Diagram (PFD) master
13.1.3 Production planning as per PFD selected in item master
13.1.3 Stage-wise inspection.
13.1.3 Serial number generation in last (Production) entry [For tracking each product
manufactured].


13.1.1. Make work order - link with BOM and sales order (ORI).

13.2. ERP features:
13.2.1. BOM Master One father item and one child item are considered in
process production. However, the raw material undergoes many processes, such as
cutting, bending, etc. [Unlike assembly BOM, where there are many child items and
one father item]



13.2.2. Work order is prepared first that is linked to the sales order (or sales
schedules). User can plan the production that is linked to the work order (job card).
Work order is a pre-requisite to PPC, for process-production.
13.2.3. PPC links the production plan for machines (from machine master).
13.2.4. PPC links the production plan for process (from process master, such as
drilling, plating, cutting, etc.).
13.3. Production plan further links (next procedure) with the actual
production entry.

14. Production Module
ERP captures both kinds of manufacturing – ‘Process production’ as well as
‘Assembly production’. Some of the following may be applicable or not will depend
on kind of manufacturing process.

14.1. Masters
14.1.1. Shift Master
14.1.2. Machine Master
14.1.3. Operator Master
14.1.4. Process Master

14.2. Transactions
14.2.1. Production Slip. (Production without link to BOM)
14.2.2. Work Order
14.2.3. Production Entry

14.3.1. Production issue and production slip register.
14.3.2. Work Order Register.
14.3.2.1. Work Order status – open, close and terminated or all with ORI / User filter.
Users filter to capture Work Order prepared by each User.
14.3.2.2. Work Order type – In-house or sub-contractor or all.
14.3.2.3. Work Order Register with ORI Filter. To select sales order for a given work
order.



14.3.3. Production Register with shift-wise, machine-wise/operator-wise filter.

14.4. ERP features
14.4.1. Pre-requisite: Item Master, Customer Master.
14.4.2. Captures scrap generated during production – end piece, etc.
14.4.3. Production Indent integrated with inventory and Finished Goods
produced.
14.4.4. Production QC.

Order Fulfillment Module
1. CRM – Customer Relationship Management
2. Sales Module.

15. CRM Module (Customer relationship management) and pre-sales
module.

15.1. Masters
15.1.1. Marketing Master – Commercial terms.
15.2. Transactions
15.2.1. Sales Enquiry.
15.2.2. Sales Quotation (as per ISO format).
15.2.3. Internal Order Acceptance (Internal ORI).
15.2.4. Order Acceptance or OA or Sales Order, (Customer Purchase Order
link). Order Receipt Information (ORI). [With Sales Schedule -Optional]
15.2.5. Proforma invoice (optional).
15.2.6. ORI status entry by Marketing/Production/Dispatch Department
15.2.7. Quotation

15.3.1. Enquiry Register. Automatic report of enquiries for which quotation not
given.
15.3.2. Quotation Register. Automatic report of quotation for which order not
received.



15.3.2.1. Automatic Pending Quotations Report (Quotation given but order not received).
15.3.3. Order Acceptance (Sales Order) Register. ORI register – (i) All; (ii)
Open; (iii) Used; (iv) Amended; (v) Booked; and ((vi) Terminated.
15.3.3.1. Automatic Pending Orders Report (order received but not dispatched).
15.3.4. Proforma invoice register.
15.3.5. Customer rating based on share of business, payment promptness.

15.4. ERP features
15.4.1.1. State wise ‘Road permit’ info. (Master).

15.4.2. Sales Officer wise Order booking.
15.4.3. Multiple contact names for one customer can be stored with their
individual email id and cell number. This helps in follow-up with the right person.
15.4.4. Sales schedule linking (optional).

16. Sales Module. (Shipping).
F. G. inventory (dispatch) and sales accounting.

16.1. Masters
16.1.1. Customer Type Master.
16.1.2. Customer Master.
16.1.3. Enquiry type master.
16.1.4. Delivery mode master.
16.1.5. Sales coordinator master.
16.1.6. Officer Master (engineer or staff name can be attached to customer.

16.2. Transactions
16.2.1. Commercial Invoice
16.2.2. Sales Invoice. Preparing Challan cum Sales Invoice (CCI)
16.2.2.1. Tax Invoice (Domestic). Link to Order Receipt Information (ORI)/Internal ORI
(Projection ORI for stocking)
16.2.2.2. Scrape sales Invoice.
16.2.2.3. Trading Invoice. (Optional)



16.2.2.4. Invoice with zero sales value (free samples). Complementary.
16.2.2.5. Purchase return invoice. (For excisable material returned to supplier).
16.2.3. Sales Return transaction. Goods returned from Customer.
16.2.4. Automatic Inspection Report (QC) for finished goods along with sales
invoices (ISO 9000).
16.2.5. Replacement Challan non-excisable (linked to sales and RGN).
16.2.6. Stock Transfer Invoice. (To transfer material to own stock locations,
such as branch, franchises, etc.).
16.2.7. ‘Repairing Invoice’ (Sales bill towards repair service charges).
16.2.8. Packing Slip

16.3.1. Invoice register – Customer details.
16.3.1.1. Invoice register – Product (item) details.
16.3.2. RGN (Return Goods Note) register.
16.3.3. Transfer Invoice register (Optional).
16.3.4. Trading Invoice register (optional).
16.3.5. Ledger. (Debtor Ledger).
16.3.5.1. Customer ledger.
16.3.5.2. Age wise outstanding report
16.3.5.3. Age wise overdue report
16.3.6. Product wise invoice list.
16.3.7. Customer Master List. User can select fields to prepare excel file, e.g. to
prepare phone book, select customer name, phone number, email id.
16.3.8. ‘Repairing Invoice’ Register.
16.3.9. Price List – with filter to select a given category or subcategory.

16.4. ERP features

16.4.1. Multiple Delivery sales schedule (Sales Order) Report.
16.4.1.1. Sales invoice link to sales schedule (for OEM).
16.4.2. Replacement management – linked with inventory and sales accounting.



16.4.3. Sales Returned Goods Note (RGN) for item received back, link to sales
account and excise.
16.4.4. Sales Invoice Link with sales order (ORI) to ensure accurate and fast
billing preparation.
16.4.5. Automatic posting to Customer Account, Excise Books, VAT / Sales Tax,
and Inventory.
16.4.6. Information about the Contact details such as multiple contact person
names, telephone numbers, email id, etc., for Customer.
16.4.7. Classification of customer Geographically (Region, state, city, Country),
Segment wise.
16.4.8. Credit control. Credit Limits for the customer. Automatic pop-up based
on link with credit limit of Customers and outstanding amount, while preparing sales
invoice.
16.4.9. Capturing CT 3 information (Optional).
16.4.10. Customer Grading , for preferential treatment as part of CRM

17. Sample management module
17.1. Master
17.1.1. Customer master
17.1.2. Item master
17.2. Transactions
17.2.1. Sample received
17.2.2. Sample sent
17.3.1. Sample received register
17.3.2. Sample sent register

18. Sub-contractor OUT Module

Complete Inventory tracking of subcontractor inventory fully integrated with creditor
accounting. Outsourcing. (Also referred as off-loading).

18.1. Master



18.1.1. Sub-contractor or Address Master (for account with inventory location).
18.1.2. Address Type Master.
18.2. Transactions
18.2.1. Job Order (Labor Purchase Order)
18.2.2. Goods Delivery Note (GDN) – integrated with excise – 57 F4 Challan
18.2.3. Goods Inward Note (GIN) – Material received back after processing with
creditor accounting integration. QC – accept / reject.
18.2.4. Special P. O. where the unloading location is direct at the sub-contractor
(in ERP the subcontractor factory is also an inventory location). Automatically ERP
will do the GDN along with the GRN entry. (Optional).

18.3.1. Job order register.
18.3.2. Job order status wise – Open JO, close JO, terminated JO.
18.3.3. GDN register.
18.3.4. GIN register.
18.3.5. GDN / GIN register. (Item sent to subcontractor and related material
received duly after processing).
18.3.6. Sub-contractor master list (sub-contractor list).

18.4. ERP features
18.4.1. Pre-requisite: Location Master, BOM Master.
18.4.2. Fully integrated with BOM master to ensure material given to the sub-
contractor is the correct child items.
18.4.3. Auto-production to consume material from sub-contractor
18.4.4. Auto GDN. Purchase Order is placed on a supplier with ‘unloading
location’ as sub-contractor. Material is directly sent to sub-contractor’s factory by
supplier. ERP can automatically captures the twin-transactions – material received
from supplier and immediately transferred to sub-contractor.
18.4.5. Stock ledger for sub-contractor location gives information about stock
lying with the TP.
18.4.6. Creditor accounts ledger for the accounts payable.
18.4.7. Money payment to sub-contractor after deducting TDS.



18.4.8. Scrap accounting

19. Export Sales Module

19.1. Master:
19.1.1. Country – currency master
19.1.2. Customer Master (with country information)
19.2. Transactions:
19.2.1. Export Order – captures foreign customer's sales order information, and
is linked to the Export invoice.
19.2.2. Foreign Currency export invoice
19.2.3. Form ARE 1 is prepared automatically with the export sales invoice
19.2.4. Packing List (automatically prepared with export invoice).
19.2.5. Commercial Invoice
19.2.6. Export Proforma Invoice

19.3. ERP features:
19.3.1. Facility to enter current Exchange rate
19.3.2. Foreign Currency Order Receipt Information (export ORI)

20. Distribution Module for standard products sold through channel
partners / distributors / stockiest / agents / franchises

Sales through franchises / channel partners / distributors / dealers / agents /
stockiest / CFA. (Optional).

20.1. Dispatch Order created by Head Office to factory for dispatch of material to
channel location.
20.2. Transfer Invoice. Preparing online Stock Transfer Invoice (to Depot /
franchises / Branch transfer). From factory to own inventory location linked to
Dispatch Order.

21. Project Tracking Module



Every order can be considered as a ‘project’ in ERP.

21.1. Masters
21.1.1. Project name Master.
21.1.2. Drawing Maser

21.2. Transactions;
21.2.1. Key transactions are captured and stored with the sales order number
(Order Receipt Information – ORI).
21.2.2. Work order and production entry link to the project.
21.3.1. Project Work Bench – This will give at a glance activity status of a
particular project (Sales order or ORI). Discipline needs to be maintained to enter
the ORI in all the respective fields to capture data.

22. Warranty / After Sales Service Module
AMC /spares management / Customer Engineer (C.E.)

22.1. Masters
22.1.1. Customer Master.
22.1.2. Item Master.
22.1.3. Types of service call Master.
22.1.4. Fault Master.
22.1.5. Commercial Terms.
22.1.6. Type of Contract.
22.1.7. Key components master (Main spares).
22.1.8. Engineers Master (Customer Engineer)

22.2. Transactions
22.2.1. Call Sheet for the products. To register complain.
22.2.2. Annual Maintenance Contract [AMC after warranty period]
22.2.3. Old History card Entry (Legacy)
22.2.4. History Card



22.2.5. AMC Bill
22.2.5.1. VAT Bill (Include only VAT).
22.2.5.2. Service Bill (Include only Service Tax)
22.2.6. Contract proposal.
22.2.7. Agreement Generation.
22.2.8. FOC (Free of Cost) Bill
22.2.9. VAT Bill
22.2.10. Expense Voucher to for Service
22.2.11. VAT Bill without link to Service Report.

22.3.1. Call Sheet Register.
22.3.2. Service Report Register. [2nd, 3rd and 4th Quarterly Service Provided]
22.3.3. Annual Maintenance Contract Report [Engineer Wise, City Wise,
Customer Wise]. AMC Register.
22.3.4. Call Analysis Report
22.3.5. Daily Service Report.
22.3.6. Annual Maintenance Report
22.3.7. Engineers Wise Revenue.
22.3.8. Components Replacement Details.
22.3.9. History card register. Filters - 1. Category, Sub-category, Item, Service
Engineer
22.3.10. VAT Bill Register. Filters - 1. Category, Sub-category, Sub-Group, Item,
Customer Type, Customer
22.3.11. Service Bill Register. Filters - 1. Customer Type, Customer
22.3.12. Contract Proposal / Agreement Register. Filters - 1. Customer, Status
22.3.13. Preventive Maintenance Report. Filters – 1. Under Warranty / AMC,
Category, Sub-category, Sub- Group, Item.
22.3.14. Expense Voucher Register for Service. Filters – 1. Service Engineer
22.3.15. Service Expense voucher register.
22.3.16. FOC (Free of Cost) Bill Register. Filters - Category, Sub-category, Sub-
Group, Item, Customer Type, Customer



22.4. ERP features
22.4.1. Call Sheet to arrive to the number of complaints or faults registered.
22.4.2. Services provided to the complaints or faults.
22.4.3. Machine Level Components used.
22.4.4. Report on Fault Analysis
22.4.5. Reports on Components Replacement Details

23. SMS Module
(Optional)

24. Email alerts module

24.1. Email id Master for sending auto emails
24.2. Alerts user for items falling below ReOrder Level (ROL)
24.3. ORI pending since defined days. Order received but dispatch pending
alert.
24.4. Pending Purchase Order since defined days.
24.5. Pending customer Bills since defined days/Months.
24.6. Bank balance going below defined amount.
24.7. Non-Moving Items.
24.8. Daily Sales to TOP Management.

25. Plant Maintenance Module

25.1. Master
25.1.1. Machine Master
25.1.2. Machine and its spares Master with Activities Integrated
25.1.3. Activity Master (Includes cost)
25.1.4. In-charge Master (Includes cost)

25.2. Transactions
25.2.1. Work Order for Machine Maintenance
25.2.1.1. Corrective Maintenance



25.2.1.2. Preventive Maintenance
25.2.2. Production Entry for Machine Maintenance

25.3.1. Machine Master Report (With Spares)
25.3.2. Works Order Register with filters as
25.3.2.1.1. Maintenance Type (Corrective/Preventive)
25.3.2.2. Work Order Status (Open, Closed, Terminated, All)
25.3.2.3. Machine Wise
25.3.2.4. In-charge Wise
25.3.3. Production Entry Register (Cost is calculated) with filters as
25.3.3.1. Maintenance Type (Corrective/Preventive)
25.3.3.2. Machine Wise
25.3.3.3. In-charge Wise
25.3.4. Spares List

25.4. Features
25.4.1. Automatic popup for maintenance to be done in next 2 days is shown
when you login in the system.
25.4.2. Automatic Email Alert for maintenance to be done, in next 2 days is
prepared and send by ERP.

29. e-Business
This module does not include website creating and design.

29.1. ERP Database contains various information such as 'Product List' or 'Price
List'. This can be now uploaded to a website.

29.2. User can restrict some web pages for internal use (Extranet / Intranet).
Show stock position online, etc.

29.3. E-Catalogue. The rapid development of B2B and B2C e-Business shows
that the internet is not just a new place to do business but constitutes a completely



new method for commerce. E-Business is the most significant area of the new
Business
‘Digital Economy’. Once you have ERP database in place, the same can be then
published to the World Wide Web. For instance, we can prepare an active website.
pare

29.4. For example, channel partners (dealer) FG item master can be
synchronized with the FG being shown on the e-commerce website for the shopping
e commerce
cart or while booking sales order (with option of showing stock).

Additional resource to learn ERP.

https://www.facebook.com/groups/discuss.erp Join Facebook Group ERP.

http://www.facebook.com/dnserp Like Facebook Page ERP.

http://dnserp.wordpress.com Subscribe ERP Blog.

http://www.twitter.com/followERP Follow on Twitter.
http://www.twitter.com/followE

http://linkd.in/lFj98r Join ERP, E-business Forum LinkedIn Group.
business Group


ERP Modules Scope Generic 29 Modules major master, input and output

More Related Content

Similar to ERP Modules Scope Generic 29 Modules major master, input and output (20)

More from Jyotindra Zaveri (20)

Recently uploaded (20)

ERP Modules Scope Generic 29 Modules major master, input and output