Error Detection And Correction
Download as PPT, PDF3 likes2,795 views
Networks must reliably transfer data between devices with complete accuracy. Errors can occur during data transmission and must be detected and corrected for reliable communication. Error detection and correction can be implemented at the data link or transport layers, and works by adding redundant bits to detect errors without having the original message. Common types of redundancy checks used include vertical redundancy check and cyclic redundancy check.
Error Detection And Correction
- 1. Error Detection and Correction Basic conceptsBasic concepts Networks must be able to transfer data from one device to another with complete accuracy. Data can be corrupted during transmission. For reliable communication, errors must be detected and corrected. Error detection and correction are implemented either at the data link layer or the transport layer of the OSI model.
- 4. Burst error
- 6. The term burst errorburst error means that two or more bits in the data unit have changed from 1 to 0 or from 0 to 1.
- 7. Error detectionError detection Error detection means to decide whether the received data is correct or not without having a copy of the original message. Error detection uses the concept of redundancy, which means adding extra bits for detecting errors at the destination.
- 8. Redundancy
- 9. Four types of redundancy checks are usedFour types of redundancy checks are used in data communicationsin data communications
- 11. PerformancePerformance It can detect single bit error It can detect burst errors only if the total number of errors is odd.
- 13. Binary Division XOR 0 0 0 0 1 1 1 0 1 1 1 0
Editor's Notes
- #8: Make sense of message. Make sense of message.