F1029R FreezeDryingFlasks
- 1. sales@aceglass.com 1430 Northwest Boulevard P: (800) 223-4524 Vineland, NJ 08360 F: (800) 543-6752 www.aceglass.com Freeze Drying Flask, w/Cap and PTFE Adapter • Compatible with all major brands of freeze dryers and manifold valves • Uniform wall weight for good temperature transfer • Black rubber cap matches O.D. and I.D. on the flask • PTFE adapter tubes available plain or with stopcock Flask (mL) Height, (mm) Neck I.D., (mm) Body O.D., (mm) Order Code Flask with 1/2 inch Plain Adapter 300 156 53 60 7035-03 600 282 53 60 7035-09 600 144 53 100 7035-15 900 199 53 100 7035-21 1200 249 53 100 7035-27 Flask with 3/4 inch Plain Adapter 300 156 53 60 7035-05 600 282 53 60 7035-11 600 144 53 100 7035-17 900 199 53 100 7035-23 1200 249 53 100 7035-29 Flask with 1/2 inch Stopcock Adapter 300 156 53 60 7035-34 600 282 53 60 7035-40 600 144 53 100 7035-46 900 199 53 100 7035-52 1200 249 53 100 7035-56 Flask with 3/4 inch Stopcock Adapter 300 156 53 60 7035-36 600 282 53 60 7035-42 600 144 53 100 7035-48 900 199 53 100 7035-54 1200 249 53 100 7035-58 Flask only 300 156 53 60 7035-104 600 282 53 60 7035-110 600 144 53 100 7035-116 900 199 53 100 7035-122 1200 249 53 100 7035-128 Neck I.D., (mm) Tube O.D., (inch) Order Code Plain Adapter only — — — 1/2 7035-150 — — — 3/4 7035-152 Stopcock Adapter only — — — 1/2 7035-160 — — — 3/4 7035-162 Cap only — — 53 — 7035-170 QUALIT Y · INNOVATION · S ERVICE 1936 - 2016 Ace Glass Celebrating 80Years FREEZE DRYING FLASKSwith Snap-On Rubber Caps Complete “fast-freeze” flask with snap-on rubber cap and 1/2-inch or 3/4-inch O.D. plain or stopcock adapter. Borosilicate flasks are designed for ease of handling, faster loading. Wide (53mm ID) mouth provides easy access to inner walls. Snap-on black rubber cap is grease free; one size fits all capacity flasks. Plain straight adapter for connecting flask cap to lyophilizer manifold is removable and fabricated from PTFE. PTFE adapter also available with shut-off valve. Complete item consists of flask, cap and PTFE adapter.
- 2. sales@aceglass.com 1430 Northwest Boulevard P: (800) 223-4524 Vineland, NJ 08360 F: (800) 543-6752 www.aceglass.com Freeze Drying Flask, w/Vacuum-Tight Flange • Dual purpose: Rotary evaporator and freeze drying flask • O-Ring for vacuum-tight seal • Adapter heads will fit all capacity flasks • Adapter head comes with nylon retainers and FETFE O-Ring • Note: These flasks are not for use in elevated temperatures © 2016 Ace Glass, Inc. All rights reserved. 02/04/2016 F1029R Vacuum-Tight Head Freeze Drying Flasks Dual purpose flask features the “TWISTLOR” ACE-Seal: simply push adapter head and flask together, then turn 90°. Flange on flask has two ground-flats opposite each other that allow nylon retainers on adapter head to pass over. O‑Ring positioned in head and flask grooves makes a vacuum-tight seal when head is turned 90° in either direction. You can correct tension between head and flask by adjusting screws on both clips. To remove, turn 90° in either direction or until nylon retainers line up with flats on flange, and flask and adapter head come apart. One adapter head fits all capacity flasks. Each adapter head is supplied with one FETFE O‑Ring. Complete item would consist of adapter head and flask. Must be ordered separately. Capacity (mL) Joint (S/T) Quantity Order Code Flasks 125 — 1 7030-03 250 — 1 7030-04 500 — 1 7030-06 1000 — 1 7030-08 2000 — 1 7030-10 3000 — 1 7030-12 5000 — 1 7030-14 Adapter Heads — 24/40 1 7030-21 — 29/42 1 7030-23 — 40/35 1 7030-27 FETFE O-Rings — — 3 7855-775