Fibaro System
0 likes299 views
The Fibaro Z-Wave modules are small electronic modules compatible with any Z-Wave home automation system. They can be installed in standard wall switch boxes in just 3 minutes using a screwdriver. The Home Center 2 and Home Center Lite are Z-Wave gateways with fast processors, remote access, and backup systems to securely manage connected devices. The Fibaro modules described include dimmers, roller shutters, and relay switches to control lights, motors, and other devices remotely.
Fibaro System
- 1. Fibaro Z-Wave modules: • Compatible with any Z-Wave home automation system, • Fibaro electronic modules are smallest devices of the type in the World and can be installed in all standard wall switch boxes, • Each module can be installed in 3 minutes, using just a screwdriver, • Designed and made in EU, in compliance with all EU regulations, • Available in competitive prices. For additional information please contact us: Michal Rodziewicz Sales Director Fibar Group Ltd. e-mail: m.rodziewicz@fibargroup.com phone: +48 509 676 518
- 2. Home Center 2 FGHC2 Product Highlights: Technical Specification Extremely efficient hardware architecture = fastest device of the type in the World, • Ultra low energy consumption, • Remote access via web page or mobile phone, • Simple, user friendly interface, • Fast and simple configuration, • Geo localization – tracking Your family members, • SMS notification, • Manageable users’ rights, • Various devices’ associations, • Conditioning scenes depending on weather or other, user-defined variables, • Advanced recovery system, • System backup is always saved on attached pen drive, hidden in the casing, • History of events. Thanks to it’s efficiency, Home Center 2 is much, much faster than other Z-Wave gateways, currently available in the World. Intel Atom 1,6Ghz Processor Large memory + fast processor = quick communication between Fibaro System devices. Hardware architecture used in Home Center 2 makes Z-Wave based home automation system work much faster then ever. 1GB RAM, 2GB SLC Hard Drive Significantly improved user safety thanks to Fibar Group own approach to data protection. Each Home Center 2 has its’ own Recovery disc, holding system backup, unique to each gateway. This closes each system completely from unauthorized access. Other advantage of this solution is quick and simple system healing after any failure. 4GB MLC Recovery Disc
- 3. Home Center Lite FGHCL Product Highlights: • Extremely efficient, optimized hardware architecture, • Ultra low energy consumption, • Remote access via web page or mobile phone, • Simple, user friendly interface, • Fast and simple configuration, • Geo localization – tracking Your family members, • Manageable users’ rights, • Various devices’ associations, • Conditioning scenes depending on weather or other, user-defined variables, • Advanced recovery system, • System backup is always saved on cloud service, • History of events. Technical Specification: Optimized memory + fast processor = quick communication between Fibaro System devices. ARM Cortex A8 720 MHz Processor Hardware architecture used in Home Center Lite makes Z-Wave based home automation system work much easier then ever. Radio Frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU; 915 - 917 MHz IL Z-Wave Significantly improved user safety thanks to Fibar Group proprietary approach to data protection. Each Home Center Lite has its’ own recovery system, holding system backup in cloud, unique to each gateway. This closes each system completely from unauthorized access. 128MB RAM, 128MB SLC Hard Drive
- 4. Universal Dimmer 500W FGD-211 Product Overview: Radio controlled light dimming module, designed to work with light sources of any type. May be connected to two-wire or three-wire cable. Fibaro Dimmer can switch or dim connected litght source either through radio waves or through the wall switch connected directly to it. Automatically senses connected device, features automatic overload protection switch-off and soft start function. Works as a dimmer or as a connector, with two-wire or three-wire cables. In case of old type fluorescent light sources or old type transformers, only on/off function may be possible. Product Highlights: As a dimmer, works with: • Conventional fluorescent lamps, • 230V operated halogen lamps, • 12V operated halogen lamps, • Dimmable LED lamps, • Using Bypass FGB001, with any dimmable light source up to 500W. As a connector, works with: • Compact fluorescent lights, • LED lamps, • Old type fluorescent lamps. Our Dimmer is the smallest device of the type in the World!
- 5. Technical Data: • Power source 230V +/-10%, 50Hz, • Output power 25-500W (resistive loads only)*, • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), • Surge protection: 2,5A, • Ambient temperature: 10o C - 40o C, • To be mounted in standard wall switch boxes Ø ≥ 50mm, • Radio protocol: Z-Wave, • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), • Outside dimmensions (L x W x H) 42mm x 36mm x 15mm. * in case of loads other than resistive, current intensity may not exceed 1.8A Universal Dimmer 500W FGD-211
- 6. Roller Shutter FGR-221 Product Overview: Radio controlled module, designed to work with electric motors in blinds, rollers, canopies and such. Fibaro Blind/Roller Shutter can steer connected device either through radio waves or through the wall switch, connected directly to it. Equipped with unique feature of monitoring current Roller/Blind position. Product Highlights: • Controlled through other Fibaro devices or any Z-Wave controller, • Microprocessor controlled, • Our Blind/Roller Shutter is the smallest device of the type in the World! Technical Data: • Power Source 110V - 230V +/-10% 50/60Hz, • Output power up to 1kW, • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), • Overheating protection: safety off at 105o C, • Ambient temperature: 10o C - 40o C, • To be mounted in standard wall switch boxes Ø ≥50mm, • Radio protocol: Z-Wave, • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), • Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
- 7. Roller Shutter 2 FGRM-222 Product Overview: New edition of Fibaro Roller Shutter, featuring a unique functionality of a garage gate controller and power metering function. Designed to work with any, VAC powered electric motor, equip- ped with either electronic or mechanic limit switches. Built-in, extremely accurate, calibrating mechanism allows for precise positioning of roller blinds or venetian blinds slats. Fibaro Roller Shutter 2 can control connected device either through radio waves or through the wall switch, connected directly to it. Product Highlights: • Power metering function, • Built-in Z-Wave network range tester, • Unique, garage gate controller mode, • Ultra precise roller blind and venetian blind positioning, • Remote software update, • Smallest device of that type in the world.
- 8. Technical Data: • Power Source 110V - 230V +/-10% 50/60Hz, • Output power up to 1kW, • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), • Overheating protection: safety off at 105o C, • Ambient temperature: 10o C - 40o C, • To be mounted in standard wall switch boxes Ø ≥50mm, • Radio protocol: Z-Wave, • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), • Outside dimmensions (L x W x H) 42mm x 36mm x 15mm. Roller Shutter 2 FGRM-222
- 9. Relay Switch 1x3kW FGS-211 Product Overview: Radio controlled Fibaro On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate an electric device of 3,0kW power output. Fibaro On/Off Relay Switch can switch on or off connected device either through radio waves or through the wall switch connected directly to it. Product Highlights: • Controlled through other Fibaro devices or any Z-Wave controller, • Microprocessor controlled, • Our ON/OFF Relay Switch is the smallest device of the type in the World! Technical Data: • Power Source 110V - 230V +/-10% 50/60Hz, • Max. AC output: 16A / 230V 50/60Hz, • Max. DC output: 16A / 30V, • Max. power output (resistive loads only) 3 kW (in case of loads other than resistive it may be necessary to connect lower output in order to protect the Switch from damage), • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), • Overheating protection: safety off at 105o C, • Ambient temperature: 10o C - 40o C, • To be mounted in standard wall switch boxes Ø ≥50mm, • Radio protocol: Z-Wave, • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), • Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
- 10. Relay Switch 2x1,5kW FGS-221 Product Overview: Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate two independent devices of 1,5kW combined power output. Fibaro Double On/Off Relay Switch can switch on or off connected devices either through radio waves or through the wall switch connected directly to Product Highlights: • Controlled through other Fibaro devices or any Z-Wave controller, • Microprocessor controlled, • Our ON/OFF Relay Switch is the smallest device of the type in the World! Technical Data: • Power Source 110V - 230V +/-10% 50/60Hz, • Max. single AC output: 8A / 230V 50/60Hz, • Max. single DC output: 8A / 30V, • Max. combined power output (resistive loads only) - 2 x 1,5 kW (in case of loads other than resistive it may be necessary to connect lower output in order to protect the Switch from damage), • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), • Overheating protection: safety off at 105o C, • Ambient temperature: 10o C - 40o C, • To be mounted in standard wall switch boxes Ø ≥50mm, • Radio protocol: Z-Wave, • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), • Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
- 11. RGBW Controller FGRGBWM-441 Product Overview: Universal, Z-Wave compatible RGB / RGBW controller. Fibaro RGBW Controller may control LED strips, RGB / RGBW LEDs and 12V - 24V powered light sources. In addition the device supports up to four, 0V - 10V analogue sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts. May be used as a dimmer with Halogen lamps. Product Highlights: • Current and historical power consumption measuring • Controlled through other Fibaro devices or any Z-Wave controller, • Microprocessor controlled, • Most advanced device of this type in the World. Technical Data: • Power source: 12V DC / 24V DC, • Rated output power: combined 12A (sum of all connected outputs), • Max load (e.g. Halogen lamps) at 12V - 144W combined, at 24V - 288W combined. • Power consumption: < 0,3W, • Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), • Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.
- 12. Product Overview: Fibaro Wall Plug, with power metering feature, is an intelligent, ultimate plug & play, most sophisticated, extremely compact, remotely controlled outlet adapter. This highly functional wall plug can be applied wherever there's a need to control electrical devices of maximum 2,5 kW power output, while monitoring power consumption in a convenient and maintenance-free way. Crystal LED ring informs about the current load of the connected appliance by visually changing its colour. Product Highlights: • Current and historical power consumption measuring, • Power consumption level visualisation with the use of crystal, colour changing, LED ring, • Controlled through other Fibaro devices or any Z-Wave controller, • Microprocessor controlled, • Smallest device of the type in the world. Fibaro Wall Plug FGWPE-101 FGWPF-101 (Schuko)
- 13. Technical Data: • Power Source 110 - 230 V AC ±10% 50/60Hz, • Rated operational output voltage: 11A/230V AC 50/60Hz - continuous load, • Power consumption: up to 0,8W, • Output power for resistive loads: 2,5 kW continuous load, • In accordance with UE standards: EN 55015 (noise) EN 60669-2-1 (operational safety) • Circuit temperature limit: 105°C, • Operational temperature: 0 - 40 °C, • For use with sockets (Compatible with each EU plug: - CEE 7/16 - max load. 2,5A; - CEE 7/17 - max load 16A; - and dual type plugs E/F), • Radio protocol: Z-Wave, • Radio frequency: 868,4 MHz EU, • Antenna range: up to 50 m outdoors / up to 30 m indoors (depending on building materials), • Dimensions (D x H): 43 x 65 mm. Fibaro Wall Plug FGWPE-101 FGWPF-101 (Schuko)
- 14. Product Overview: The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems. Product Highlights: • Unique design • Detects event the slightest motion and changes in temperature, • One of a kind, earthquake detection functionality, • Battery powered, • Wireless communication via Z-Wave protocol, • Features wireless software update. Motion Sensor FGMS-001
- 15. Motion Sensor FGMS-001 Technical Data: • Power Supply: CR123A battery, 3.6 VDC • EU directive compliance: LVD 2006/95/WE; EMC 2004/108/WE; R&TTE 1999/5/WE; RoHS II • Recommended installation height: 2,4m • Operational Temperature: 0 - 40o C* • Measured Temperature Range: -20 to 100o C • Temperature Measuring Accuracy: 0,5o C (within 0oC-40oC range) • Light Intensity Measuring Range: 0 - 32000 LUX • Radio Protocol: Z-Wave • Radio Frequency: 869 MHz EU; 908 MHz US; 921 MHz ANZ; 869 MHz RU; • Range: up to 50 m outdoors; up to 30 m indoors (depending on terrain and building structure)
- 16. Product Overview: Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensors probe extended by connected wire. The device has built in LED and sound alarm. In addtion, the sensor is equ- ipped with a tilt sensor reporting tilt or movement to the main controller e.g. when the Sensor has been taken by someone from it’s original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-resistant, drifts on the water sufrace and keeps on sending alarm signal in case of substantial inundation. Product Highlights: • Unique, floating design • Detects flooding or fire • Battery or VDC powered • Communicates with a Z-Wave network or a wired alarm system • Features wireless software update. Flood Sensor FGFS-101
- 17. Flood Sensor FGFS-101 Technical Data: • Power Supply: 12 - 24 VDC • Battery Type: CR123A • Power Consumption (at VDC operation): 0,4W • Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA • Maximum voltage at output terminals: 40V (AC or DC) • EU standards compliance: EMC 2004/108/EC, R&TTE 199/5/WE • Radio protocol: Z-Wave • Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU; • Range: up to 50m outdoors up to 30m indoors (depending on terrain and building structure) • Operational Temperature: 0o C - 40o C • Measured temperature range: -20o C - 100o C • Temperature measuring accuracy: 0,5o C (within 0o C- 40o C range) • Dimensions (Diameter x Height): 72 mm x 28 mm
- 18. Product Overview: Fibaro Smoke Sensor is a universal, Z-Wave compatible, optical smoke detector. The device can be battery (battery life approx. 3 years) or alternatively VDC powered (12 or 24 VDC). Smoke alarm is signaled by sound, LED diode blinking and through operating commands sent to the Z-Wave network devices. Additionally, smoke alarm may be sent to an alarm system or fire alarm system hub, through a NC contact terminals opening. Optical detector allows for detecting smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperatute threshold is exceeded. Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED signaling diode signals fire, operating mode and may serve as the Z-Wave network range controller. Sensor is desi- gned to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor). Product Highlights: • Unique design, assuring detection of even the smallest amount of smoke • Detects smoke presence or rapid temperature changes • Battery or VDC powered • Communicates with a Z-Wave network or a wired alarm system • Features wireless software update. Smoke Sensor FGSS-001
- 19. Smoke Sensor FGSS-001 Technical Data: • Power Supply: 12 - 24 VDC • Battery Type: CR123A • Power Consumption (at VDC operation): 0,4W • Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA • Maximum voltage at output terminals: 24V (AC or DC) • EU standards compliance: EMC 2004/108/EC, R&TTE 199/5/WE • Radio protocol: Z-Wave • Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU; • Range: up to 50m outdoors up to 30m indoors (depending on terrain and building structure) • Operational Temperature: 0o C - 40o C • Measured temperature range: -20o C - 100o C • Temperature measuring accuracy: 0,5o C (within 0o C- 40o C range) • Dimensions (Diameter x Height): 65 mm x 28 mm
- 20. Universal Binary Sensor FGBS-001 Product Overview: The Universal Binary Sensor is a wireless module that makes it possible to improve the functio- nality of any sensor with a binary output by allowing it to communicate with the wireless network Z-WAVE and the FIBARO building intelligence system. Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. The device can service up to two binary sensors and up to four DS18B20 temperature sensors. The Sensor was designed for installation in the housing of a sensor or another device, the func- tionality of which we wish to improve. The Universal Binary Sensor may be used whenever wireless collection of data from sensors is required. Once additional safety housing have been installed, the Sensor can also be used in areas with high humidity and high temperature. The Sensor’s main function is the integration of the wireless FIBARO system with the existing wire-based and wireless alarm and measurement systems. As an element of the safety system the device is transparent for parametric alarm lines. Product Highlights: • Controlled with FIBARO system devices or any Z-Wave controller • Microprocessor-based control • Compatible with regular and parametric alarm lines (can be connected to 2 alarm detectors) • Compatible with binary sensors (can be connected to 2 binary outputs) • Compatible with DS18B20 temperature sensors (can be connected to four DS18B20 temperature sensors)
- 21. Technical Data: • Supply voltage: 9-30V DC ±10% • Input: 2 potential-free inputs, 1 digital input 1-wire • Output: 2 potential-free outputs • Maximum current carrying capacity of outputs: 150mA • Maximum voltage at output contacts: 36V DC / 24V AC ±5% • Operating temperature: 0 - 40 °C • Number of servicing temperature sensors: 4 • Measurement range: -55 °C - +126 °C • Radio protocol: Z-Wave • Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, • Range: up to 30 m in buildings (depending on the construction materials) up to 50 m in the field • Dimensions (L x W x H): 14.5 x 27.3 x 12 mm Universal Binary Sensor FGBS-001
- 22. Product Overview: The Fibaro Door / Window Sensor is a battery powered, Z-Wave compatible reed sensor. The Fibaro Door / Window Sensor detects the doors, windows, garage gates, roller blinds etc devi- ces opening, through detaching its two elements. Every time two elements of the Sensor detach, the Sensor sends a signal to the Z-Wave network main controller. This may be used in scenes, but also in alarm and monitoring systems. In addition, The Fibaro Door / Window Sensor may be connected to a DS18B20 temperature sensor, and has one additional input. Product Highlights: • Controlled with Fibaro System devices or any Z-Wave controller, • Radio signal is sent each time both parts of the Door / Window Sensor separate, • Easily mounted on doors, windows, gates, blinds, • Compatible with DS18B20 temperature sensors, • May be connected to a switch, via IN input. Colour options: FGK-101 FGK-102 FGK-103 FGK-104 FGK-105 FGK-106 FGK-107 Door / Window Sensor FGK-101 - 107
- 23. Technical Data: • powered by single ER14250 battery, • inputs - single, IN • number of DS sensors supported - 1 • ambient temperature - 0 - 40o C • radio frequency - 868,4 MHz EU; 908,4 MHz US; 921,4 MHz AU/NZ; 869,2 MHz RU, • operating range - up to 30 m indoors; up to 50 m outdoors, • dimensions (L x W x H): 76 x 17 x 19 mm Door / Window Sensor FGK-101 - 107
- 24. Bypass Fibaro FGB-001 Product Overview: Bypass Fibaro is a device complementary to Fibaro Dimmer FGD211. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable. Product Highlights: • Power source: 230V +/-10% 50Hz • Overheating protection: safety off at 105o C, • To be mounted in standard, wall switch boxes Ø ≥ 50 mm, • Outside dimmensions (L x W x H) - 17mm x 18mm x 8,3mm.