First year scheme_and_syllabus_effective_from_2012-13n1

R.T.U., Kota Scheme and Syllabus B.Tech. (1st
and 2nd
Semesters) effective from Session 2012-13
2 | P a g e
Scheme of Teaching & Examination for I year B.Tech. I Semester
Effective from the Session: 2012 – 2013
(Common to all branches of Engineering)
Sub
Code
Subject
Number of
Teaching
Hours
Per
Duration
of Theory
Paper
(Hours)
Marks Allocation
L T P
TheoryTerm
Test
Sessio
nal
Prac.
Exam Total
101 Communicative English 3 1 - 3 80 20 100
102 Engineering Mathematics-I 3 1 - 3 80 20 100
103 Engineering Physics-I 3 1 - 3 80 20 100
104 Engineering Chemistry 3 1 - 3 80 20 100
105
Basic Electrical &
Electronics Engineering 3 - - 3 80 20 100
Total 15 04 - - 400 100 500
106 Engineering Physics Lab-I - - 2 - 45 30 75
107 Engineering Chemistry Lab 2 45 30 75
108 Electrical & Electronics Lab - - 2 - 60 40 100
109 Practical Geometry - - 3 60 40 100
110 Workshop Practice - - 2 60 40 100
111 Discipline & Extra curricular
Activities - - - 50 - 50
Grand Total 15 04 11 - 400 100 320 180 1000
(Total 30 periods per week)

and 2nd
3 | P a g e
Scheme of Teaching & Examination for I year B.Tech II Semester
Effective from the Session: 2012 – 2013
(Common to all branches of Engineering)
Sub
Code
Subject
Number of
Teaching
Hours Per
Week
Duration
of theory
Paper
(Hours)
Marks Allocation
L T P Theory
Term
Test
Sessi
onal
Prac.
Exam Total
201 Communication Techniques 2 - - 3 80 20 100
202 Engineering Mathematics-II 3 1 - 3 80 20 100
203 Engineering Physics-II 2 1 - 3 80 20 100
204 Chemistry & Environmental
Engineering 3 1 - 3 80 20 100
205 Engineering Mechanics 3 1 - 3 80 20 100
206
Fundamentals of Computer
Programming
3 - - 3 80 20 100
Total 16 04 - - 480 120 600
207 Engineering Physics Lab-II - - 2 - 30 20 50
208 Chemistry & Environmental
Engineering Lab - - 2 - 30 20 50
209 Computer programming lab - - 2 45 30 75
210 Machine Drawing - - 3 - 60 40 100
211 Communication Technique
Lab - - 2 - 45 30 75
212 Discipline & Extra
Curricular Activities - - - - - 50 - 50
Grand Total 16 04 11 - 480 120 260 140 1000
(Total 31 periods per week)
L = Lecture, T = Tutorial, P = Practical

and 2nd
4 | P a g e
101 COMMUNICATIVE ENGLISH
Unit 1
Grammar
1. Tenses
2. Passive Voice
3. Indirect Speech
4. Conditional Sentences
5. Modal Verbs
Unit 2
Composition
1. Dialogue Writing
2. Paragraph and Precis Writing
3. Report, its importance and Report Writing
Unit 3
Short Stories
1. The Luncheon: W.S. Maugham
2. How Much Land Does a Man Need?: Leo Tolstoy
3. The Last Leaf: O. Henry
Unit 4
Essays
1. On the Rule of the Road: A. G. Gardiner
2. The Gandhian Outlook: S. Radhakrishnan
3. Our Own Civilisation: C.E.M. Joad
Unit 5
Poems
1. The Unknown Citizen: W. H. Auden
2. The Character of A Happy Life: Sir Henry Wotton
3. No Men are Foreign: James Kirkup
4. If : Rudyard Kipling
Suggested Readings
1. Communication Skills for Engineers and Scientists, Sangeeta Sharma & Binod Mishra,
PHI Learning Pvt. Ltd.
2. English for Engineers: Made Easy, Aeda Abidi & Ritu Chaudhary, Cengage Learning,
(New Delhi)
3. A Practical Course for Developing Writing Skills in English, J.K. Gangal, PHI Learning
Pvt. Ltd., New Delhi.
4. Intermediate Grammar, Usage and Composition, Tickoo, A. E. Subramaniam & P. R.
Subramaniam, Orient Longman (New Delhi)
5. The Written Word , Vandana R. Singh, Oxford University Press (New Delhi)

and 2nd
5 | P a g e
6. The Great Short Stories edited by D.C. Datta, Ram Narain Lal Publishers (Allahabad)
7. Professional Communication, Kavita Tyagi & Padma Misra,PHI Learning Pvt. Ltd., New
Delhi.
8. “Learn Correct English: Grammar, Usage and Composition” by Shiv K. Kumar &
Hemalatha Nagarajan, Pearson (New Delhi).
9. “Current English Grammar and Usage with Composition” by R.P. Sinha, Oxford
University Press (New Delhi).
10. “Grammar of the Modern English Language”, by Sukhdev Singh & Balbir Singh,
Foundation Books (New Delhi).
102 ENGINEERING MATHEMATICS-I
Unit 1
Differential Calculus:Asymptotes(Cartesian Coordinates Only), Curvature(Cartesian Coordinates
Only), Concavity, Convexity and Point of Inflexion (Cartesian Coordinates Only), Curve Tracing
(Cartesian and Standard Polar Curves-Cardioids, Lemniscates of Bernoulli, Limacon,
Equiangular Spiral).
Unit 2
Differential Calculus: Partial Differentiation, Euler’s Theorem on Homogeneous Functions,
Approximate Calculations, Maxima & Minima of Two and More Independent Variables,
Lagrange’s Method of Multipliers.
Unit 3
Integral Calculus: Surface and Volumes of Solids of Revolution, Double Integral, Double
Integral by changing into polar form , Areas & Volumes by Double Integration ,Change of Order
of Integration, Beta Function and Gamma Function (Simple Properties).
Unit 4
Differential Equations: Differential Equations of First Order and First Degree - Linear Form,
Reducible to Linear form, Exact Form, Reducible to Exact Form, Linear Differential Equations
of Higher Order with Constant Coefficients Only.
Unit 5
Differential Equations: Second Order Ordinary Differential Equations with Variables
Coefficients, Homogeneous and Exact Forms, Change of Dependent Variable, Change of
Independent Variable, Method of Variation of Parameters.
Suggested Readings
1. Advanced Engineering Mathematics, Erwin Kreyszig, Wiley 9th Edition.
2. Calculus and Analytical Geometry, Thomas and Finney, Narosa Publishing House. New
Delhi.
3. A Text Book of Differential Equations, M.Ray and Chaturvedi, Students Friends & Co.
Publisher, Agra.
4. Higher Engineering Mathematics, B.V.Ramana, Tata McGraw Hill.

and 2nd
6 | P a g e
5. Thomas Calculus, Maurice D. Weir, Joel Hass and others, Pearson, 11th
Edition.
103 ENGINEERING PHYSICS-I
Unit 1
Interference of light
Michelson’s Interferometer: Production of circular & straight line fringes, Determination of
wavelength of light, Determination of wavelength separation of two nearby wavelengths.
Newton’s rings and measurement of wavelength of light.
Optical technology: Elementary idea of anti-reflection coating and interference filters.
Unit 2
Polarization of light
Plane circular and elliptically polarized light on the basis of electric (light) vector, Malus law.
Double Refraction: Qualitative description of double refraction phase retardation plates, quarter
and half wave plates, construction, working and use of these in production and detection of
circularly and elliptically polarized light.
Optical Activity: Optical activity and laws of optical rotation, Specific rotation and its
measurement using half-shade and bi-quartz devices.
Unit 3
Diffraction of light
Single slit diffraction: Quantitative description of single slit, position of maxima / minima and
width of central maximum, intensity variation.
Diffraction Grating: Construction and theory, Formation of spectrum by plane transmission
grating, Determination of wavelength of light using plane transmission grating.
Resolving power: Geometrical & Spectral, Raleigh criterion, Resolving power of diffraction
grating and telescope.
Unit 4
Elements of Material Science
Bonding in Solids: Covalent bonding and Metallic bonding.
Classification of Solids as Insulators, Semiconductors and Conductors.
Semiconductors: Conductivity in Semiconductors, Determination of Energy gap of
Semiconductor.
X-Ray diffraction and Bragg’s Law.
Hall Effect: Theory, Hall Coefficient and applications.
Unit 5
Special Theory of Relativity
Postulates of special theory of relativity, Lorentz transformations, relativity of length, mass and
time.
Relativistic velocity addition and mass-energy relation, Relativistic Energy and momentum.
Suggested Readings

and 2nd
7 | P a g e
1. Fundamental of Optics, Jenkins and White, Fourth Edition, McGraw Hill.
2. Optics, Ajoy Ghatak, Third Edition, Tata McGraw Hill.
3. Concept of Modern Physics, A. Baiser, Fifth Edition, McGraw Hill.
4. Modern Physics, J. Morrison, Edition 2011, Elsevier.
5. Elements of Material Science and Engineering, Van Vlack, Sixth Edition, Pearson.
104 ENGINEERING CHEMISTRY
Unit 1
General Aspects of Fuel: Organic fuels, Origin, classification and general aspects of fossil fuels.
Solid fuels, Coal, carbonization of coal, manufacturing of coke by Beehive oven and by product
oven method. Liquid fuels, Composition of petroleum, advantages and refining of petroleum.
Cracking, reforming, polymerization and isomerization of refinery products. Synthetic petrol,
Bergius and Fischer Tropsch process. Knocking, octane number and anti-knocking agents.
Gaseous fuels, Advantages, manufacturing, composition and calorific value of coal, gas and oil
gas.
Unit 2
Fuels Analyses: Ultimate and proximate analysis of coal, Determination of calorific value of
solid and gaseous fuels by bomb and Junker’s Calorimeter respectively. Calculations of calorific
value based on Dulong’s formula. Combustion, requirement of oxygen/ air in combustion
process. Flue gas analysis by Orsat’s apparatus and its significance.
Unit 3
Polymers: Different methods of classification, basic ideas of polymerization mechanisms.
Elastomers: Natural rubber, vulcanization, Synthetic Rubbers viz. Buna-S, Buna-N, Butyl and
neoprene rubbers.
New Engineering Materials: Fullerenes: Introduction, properties, preparation and uses. Organic
Electronic Materials (including conducting polymers- poly (p-phenylene), polythiophenes,
Polyphenylene, vinylenes, polypyroles, polyaniline).
Unit 4
Cement: Definition, Composition, basic constituents and their significance, Manufacturing of
Portland cement by Rotary Kiln Technology, Chemistry of setting and hardening of cement and
role of gypsum.
Glass: Definition, Properties, Manufacturing of glass and importance of annealing in glass
making, Types of silicate glasses and their commercial uses, Optical fiber grade glass.
Unit 5
Refractory: Definition, classification, properties, Requisites of good refractory and
manufacturing of refractory. Preparation of Silica and fire clay refractory with their uses. Seger’s
(Pyrometric) Cone Test and RUL Test
Lubricants: Introduction, classification and uses of lubricants. Types of lubrication. Viscosity &
viscosity index, flash and fire point, cloud and pour point, steam emulsification number,
precipitation number and neutralization number.

and 2nd
8 | P a g e
Suggested Readings
1. The Chemistry and Technology of Coal, by J G Speigh, CRC Press
2. The Chemistry and Technology of Petroleum, by J G Speigh, CRC Press
3. Polymer Chemistry: An Introduction, Malcolm P. Stevens, Oxford University Press
4. Solid State Chemistry and Its Applications, Anthony R West, John Wiley & Sons
5. Lubricants and Lubrications, Theo Mang, Wilfeied, Wiley-VCH
6. Hand Book of Conjugated Polymers, Tejre A Skotheim and J. R. Reynolds, CRC Press
105 BASIC ELECTRICAL & ELECTRONICS ENGINEERING
Unit 1
Basic Concepts of Electrical Engineering: Electric Current, Electromotive force, Electric Power,
Ohm’s Law, Basic Circuit Components, Faraday’s Law of Electromagnetic Induction, Lenz’s
Law, Kirchhoff’s laws, Network Sources, Resistive Networks, Series-Parallel Circuits, Node
Voltage Method, Mesh Current Method, Superposition, Thevenin’s, Norton’s and Maximum
Power Transfer Theorems.
Unit 2
Alternating Quantities: Introduction, Generation of AC Voltages, Root Mean Square and
Average Value of Alternating Currents and Voltages, Form Factor and Peak Factor, Phasor
Representation of Alternating Quantities, Single Phase RLC Circuits, Introduction to 3-Phase
AC System.
Unit 3
Rotating Electrical Machines; DC Machines: Principle of Operation of DC Machine as Motor
and Generator, EMF Equation, Applications of DC Machines.
AC Machines: Principle of Operation of 3-Phase Induction Motor, 3-Phase Synchronous Motor
and 3- Phase Synchronous Generator (Alternator), Applications of AC Machines.
Unit 4
Basic Electronics: Conduction in Semiconductors, Conduction Properties of Semiconductor
Diodes, Behaviour of the PN Junction, PN Junction Diode, Zener Diode, Photovoltaic Cell,
Rectifiers, L, C, & L-C filters, Bipolar Junction Transistor, Field Effect Transistor, Transistor as
an Amplifier.
Digital Electronics: Boolean algebra, Binary System, Logic Gates and Their Truth Tables.
Unit 5
Communication Systems: Introduction, IEEE Spectrum for Communication Systems, Types of
Communication, Amplitude and frequency Modulation.
Instrumentation : Introduction to Transducers: Thermocouple, RTD, Strain Gauges,
Load Cell and Bimetallic Strip.
Introduction and classification of ICs.
Suggested Readings
1. Electrical and Electronic Technology by Edward Hughes et al, Pearson Publication

and 2nd
9 | P a g e
2. Basic Electrical & Electronics Engineering by V. Jagathesan, K. Vinod Kumar & R. Saravan
Kumar, Wiley India.
3. Basic Electrical & Electronics Engineering by Van Valkenburge, Cengage learning Indian
Edition
4. Basic Electrical and Electronics Engineering by Muthusubrmaniam, TMH
5. Fundamentals of Electrical Engineering by Leonard S. Bobrow, Oxford University Press
6. Fundamentals of Electrical and Electronics Engineering by Ghosh, Smarajit, PHI India
7. Basic Electrical & Electronics Engineering by Ravish Singh, TMH
8. Basic Electronics Engineering by Vijay Baru et al, Dream Tech, New Delhi
106 ENGINEERING PHYSICS LAB-I
1. To determine the wave length of monochromatic light with the help of Fresnel’s biprism.
2. To determine the wave length of sodium light by Newton’s Ring.
3. To determine the specific rotation of Glucose (Sugar) solution using a polarimeter.
4. To determine the wave length of prominent lines of mercury by plane diffraction grating with
the help of spectrometer.
5. To convert a Galvanometer in to an ammeter of range 1.5 amp. and calibrate it.
6. To convert a Galvanometer in to a voltmeter of range 1.5 volt and calibrate it.
7. To study the variation of a semiconductor resistance with temperature and hence determine
the Band Gap of the semiconductor in the form of reverse biased P-N junction diode.
8. To study the variation of thermo e.m.f. of iron copper thermo couple withtemperature.
9. To determine coherent length and coherent time of laser using He-Ne Laser.
107 ENGINEERING CHEMISTRY LAB
1. Proximate analysis of solid fuel.
2. Experiments based on Bomb Calorimeter.
3. To determine the strength of Ferrous Ammonium sulphate solution with the help of K2Cr2O7
solution.
4. To determine the strength of CuSO4 solution with the help of hypo solution.
5. To determine the strength of NaOH and Na2CO3 in a given alkali mixture.
6. Determination of Na/K/Ca by flame photometer in a given sample.
7. Determination of turbidity in a given sample.
8. To determine the flash and fire point of a given lubricating oil.
9. To determine the viscosity of a given lubricating oil by Redwood viscometer.
10. To determine cloud and pour point of a given oil.

and 2nd
10 | P a g e
108 ELECTRICAL AND ELECTRONICS LAB
Electrical lab
1. Assemble house wiring including earthing for 1-phase energy meter, MCB, ceiling fan, tube
light, three pin socket and a lamp operated from two different positions. Basic functional
study of components used in house wiring.
2. Prepare the connection of ceiling fan along with the regulator and vary the speed.
3. Prepare the connection of single phase induction motor through 1-Phase Auto-transformer
and vary the speed.
4. Prepare the connection of three phase squirrel cage induction motor through 3-Phase Auto-
transformer and vary the speed.
5. Prepare the connection of Fluorescent Lamp, Sodium Vapour and Halogen Lamp and
measure voltage, current and power in the circuit.
Electronics lab
1. Identification, testing and application of Resistors, Inductors, Capacitors, PN-Diode. Zener
Diode, LED, LCD, BJT, Photo Diode, Photo Transistor, Analog/Digital Multi- Metres and
Function/Signal Generator.
2. Measure the frequency, voltage, current with the help of CRO.
3. Assemble the single phase half wave and full wave bridge rectifier & the analyse effect of L,
C and L-C filters in rectifiers.
4. Study the BJT amplifier in common emitter configuration. Measure voltage gain plot gain
frequency response and calculate its bandwidth.
5. Verify the truth table of AND, OR, NOT, NOR and NAND gates.
109 PRACTICAL GEOMETRY
1. (a) Lines, Lettering & Dimension (Sketch Book)
(b) Scale-representative Fraction, Plan scale, Diagonal Scale, Vernier scales (In sheet)
comparative Scale, & scale of chords (Sketch Book)
2. (a) Conic Section:-
Construction of Ellipse, Parabola & Hyperbola by different methods (In sheet)
(b) Engineering curves:-
Construction of cycloid, Epicycloids, Hypocycloid and Involutes (In sheet) Archimedean
and Logarithmic spiral, (Sketch book)
3. (a) Type of Projection, Orthographic Projection: First Angle and third Angle Projection
(Sketch Book)
(b) Projection of Points (Sketch Book)
(c) Projection of Straight lines, different position of Straight lines, methods for determining True
length, true inclinations and Traces of straight lines (Four problems in sheet and three
problems in (Sketch Book)
(d) Projection of Planes: Different positions of Plane lamina like.:- Regular polygon, circle
three of planes (Four problems in Drawing sheet and three problems in Sketch Book.)
4. (a)Projection of Solids:- Projection of right and regular Polyhedron, Prisms, Pyramids and
cone (Four Problem in Drawing sheet and there in Sketch Book.)

and 2nd
11 | P a g e
(b) Section of Solids:- Projection of Frustum of a cone and pyramid, Projection of Truncated
Solids (like Prism, Pyramid, Cylinder and Cone) in different positions.
5. (a) Development of Surfaces:- Parallel line and Radial line method for right, regular
solids
(b) Isometric Projections:- Isometric Scales, Isometric Axes, Isometric Projection of Solids.
Suggested Readings
1. Engineering Drawing Geometrical Drawing - P.S.Gill, S.K.Katara & Sons.
2. Engineering Drawing, Dhanarajay A Jolhe ,Tata McGraw Hill.
3. Engineering Drawing, Basant Agarwal & CM Agarwal ,Tata McGraw Hill.
4. Engineering Drawing, N.D.Bhatt, Charotar Publishing House Pvt. Ltd.
110 WORKSHOP PRACTICE
Carpentry Shop
1. T – Lap joint
2. Bridle joint
Foundry Shop
1. Mould of any pattern
2. Casting of any simple pattern
Welding Shop
1. Gas welding practice by students on mild steel flat
2. Lap joint by gas welding
3. MMA welding practice by students
4. Square butt joint by MMA welding
5. Lap joint by MMA welding
6. Demonstration of brazing
Machine Shop Practice
1. Job on lathe with one step turning and chamfering operations
2. Job on shaper for finishing two sides of a job
3. Drilling two holes of size 5 and 12 mm diameter on job used / to be used for shaping
4. Grinding a corner of above job on bench grinder
Fitting and Smithy Shop
1. Finishing of two sides of a square piece by filing
2. Tin smithy for making mechanical joint and soldering of joint
3. To cut a square notch using hacksaw and to drill three holes on PCD and tapping
Suggested Readings
1. Mechanical Workshop Practice, K.C. John, PHI Learning New Delhi.
2. Elements of Workshop Technology Hajra & Choudhary,Media Promoters &Publisher.
3. Workshop Technology , W.A.J.Chapman, CBS Publisher & Distributor New Delhi.
111 DISCIPLINE & EXTRA CURRICULAR ACTIVITIES (DECA)
Component – A Discipline: 25 Marks

and 2nd
12 | P a g e
The marks shall be deducted from this component for those who shall involve themselves in
indiscipline/undesirable/Ragging activities or in case of penalty of marks imposed by Standing
Disciplinary Committee (SDC) and approved by Head of the Institution concerned subject to a
maximum of 25 marks.
Component – B Extra Curricular Activities: 25 Marks
Marks shall be awarded for the participation of students in various Extra Curricular Activities
organised by the respective institutions as per the following, subject to a maximum of 25 marks.
In case student does not participate in any of the Extra Curricular Activities, he/ she shall be
awarded zero(0) marks in DECA - Component B.
(i) National Cadet Corps (NCC).
(ii) National Service Scheme (NSS)
(iii) Scouts & Guide
(iv) Sports Activities
(v) Literary Activities & model
(vi) Cultural Activities
(vii) Paper Presentation/ Participation in National Conferences/ Seminars/ Workshops etc.
(viii) Blood Donation
(ix) Participation in activities of College Annual day Celebration
(x) Organising/ Participation/ Volunteer in different activities organised by the
departments/ institute
(xi) Organising/ Participation in activities of Students Chapters of ISTE, IE (I), IEEE,
IETE, Vivekanand Kendra etc.
201 COMMUNICATION TECHNIQUES
Unit 1
Elements of Communication
1. Communication: Meaning, Importance and Process
2. Objectives of Communication
3. Media and Types of Communication
Unit 2
Basics of Communication
1. Verbal and Non-Verbal Communication
2. Formal and Informal Channels of Communication
3. Qualities of Good Communication
Unit 3
Skills of Communication
1. Barriers to Communication
2. Professional Communication

and 2nd
13 | P a g e
3. Interpersonal Communication and methods to improve it
Unit 4
Grammar
1. Subject-Verb Agreement (Concord)
2. Linking Words (Conjunctions)
3. Relative Clauses
4. Common Errors
Unit 5
Composition
1. Resume Writing
2. Business Letter Writing: Sales, Credit, Enquiry, Order, Claim, Complaint, Job
Applications, etc.
3. E-mail messages
4. Telephone Etiquettes
Suggested Readings
1. Communication Skills for Engineers and Scientists, Sangeeta Sharma and Binod Mishra,
PHI Learning Pvt. Ltd.(New Delhi)
2. English Grammar and Composition, Gurudas Mukherjee, Ane Books Pvt. Ltd.(New
Delhi)
3. Current English Grammar and Usage with Composition, R.P. Sinha, Oxford University
Press (New Delhi)
4. Effective Technical Communication, M Ashraf Rizvi, Tata McGraw Hill (New Delhi)
5. Business Communication, Meenakshi Raman & Prakash Singh, Oxford University Press
(New Delhi)
6. Professional Communication, Aruna Koneru, Tata McGraw Hills, New Delhi.
7. A Practical Course for Developing Writing Skills in English, J.K. Gangal, PHI Learning
Pvt. Ltd., New Delhi.
8. “Communicative English for Engineers and Professionals”, by Nitin Bhatnagar & Mamta
Bhatnagar, Pearson (New Delhi).
9. “The Ace of Soft Skills”, by Gopalswamy Ramesh & Mahadevan Ramesh, Pearson (New
Delhi)
202 ENGINEERING MATHEMATICS-II
Unit 1
Coordinate Geometry of Three Dimensions: Equation of a sphere, Intersection of a sphere and a
plane, tangent plane, Intersection of two spheres, orthogonality of two spheres, Right circular
cone. Right circular cylinder.
Unit 2
Matrices: Rank of a matrix, Rank of matrix by reducing to normal forms, Consistency of systems
of linear simultaneous equations and its solution, Eigen values and Eigen vectors, Cayley-

and 2nd
14 | P a g e
Hamilton theorem (without proof), Diagonalization of matrix.
Unit 3
Vector Calculus: Scalar and vector field, differentiation & integration of vector functions,
Gradient, Divergence, Curl and Differential Operator, Line, Surface and volume Integrals.
Unit 4
Application of Vector Calculus: Green’s Theorem in a Plane, Gauss’s and Stoke’s Theorem
(without proof) and their Applications.
Fourier Series: Expansion of simple functions in Fourier Series, half range Fourier sine and
cosine series, change of interval. Harmonic Analysis.
Unit 5
Differential Equations: Series Solutions of Second Order Linear Differential Equations with
Variable Coefficients (Complementary Functions only), Partial Differential Equations of First
Order : Lagrange’s Form, Standard Forms, Charpit’s Method .
Suggested Readings
1. Advanced Engineering Mathematics, Erwin Kreyszig, Wiley 9th
Edition.
2. Calculus and Analytical Geometry, Thomas and Finney, Narosa Publishing House N.
Delhi.
3. A Text Book of Differential Equations, M.Ray and Chaturvedi, Students Friends & Co.
Publisher, Agra.
4. Higher Engineering Mathematics, B.V.Ramana, Tata Mcgra Hill.
5. Mathematics for Engineers, Chandrika Prasad, Prasad Mudranalaya Allahabad.
6. Advanced Mathematics for Engineers, Chandrika Prasad, Prasad Mudranalaya
Allahabad.
203 ENGINEERING PHYSICS-II
Unit 1
Quantum Mechanics: Compton effect & quantum nature of light, Derivation of time dependent
and time independent Schrödinger’s Wave Equation, Physical interpretation of wave function
and its properties, boundary conditions, Particle in one-dimensional box.
Unit 2
Applications of Schrödinger’s Equation, Particle in three-dimensional box and Degeneracy,
Barrier penetration and tunnel effect, Tunneling probability, Alpha Decay, Summerfield’s Free
electron gas model Postulates, Density of energy states, Fermi energy level.
Unit 3
Coherence and Optical Fibres, Spatial and temporal coherence, Coherence length, Coherence
time and ‘Q’ factor for light, Visibility as a measure of coherence, Spatial Coherence and size of
the source, Temporal coherence and spectral purity, Optical fiber as optical wave-guide,
Numerical aperture , maximum angle of acceptance and applications of Optical Fiber.

and 2nd
15 | P a g e
Unit 4
Lasers and Holography: Theory of laser action, Einstein’s coefficients, Components of a laser,
Threshold conditions for laser action; Theory, Design and applications of He-Ne and
semiconductor lasers; Holography versus photography, Basic theory of holography, Basic
requirement of a holographic laboratory; Applications of holography in microscopy and
interferometry.
Unit 5
Nuclear Radiation Detectors, Characteristics of gas filled detectors: general considerations,
Constructions, Working and properties of: Ionization chamber, proportional counter, G. M.
Counter and Scintillation Counter.
Suggested Readings
1. Fundamental of Optics, Jenkins and White, Fourth Edition, McGraw Hill.
2. Optics, Ajoy Ghatak, Third Edition, Tata McGraw Hill.
3. Quantum Mechanics, Schiff, Third Edition, McGraw Hill.
4. Quantum Mechanics, Merzbacher, Third Edition, Wiley India.
5. Nuclear Physics: Principles and Applications, John Lilley, Wiley India.
204 CHEMISTRY & ENVIRONMENTAL ENGINEERING
Unit 1
Water: Common Impurities of water Hardness of water, Determination of hardness by Clark’s
test and complexometric (EDTA) method, Numerical based on hardness and EDTA method,
Municipal Water Supply: Requisites of potable water, Steps involved in purification of water,
Sedimentation, coagulation, Filtration and Sterilization, Break point chlorination.
Unit 2
Water Treatment: Softening of water, Lime-Soda, Permutit (Zeolite) and Deionization
(Demineralization) methods, Boiler troubles their causes, disadvantages and prevention:
Formation of solids (Scale and Sludge), Carry over (Priming and Foaming), Corrosion and
Caustic, Embrittlement. Numerical problems based on Lime-Soda and Zeolite softening
methods.
Unit 3
Basics of Environment: Environmental Pollution, Environmental Acts and Regulations,
Environmental Impact Assessment (EIA), Necessity and methodology of EIA. Renewable
sources of energy, Potential & present status of renewable sources of energy in India. Functional
concepts of Ecology, Basics of species, Ecosystem, Hydrological and chemical cycles, Energy
flow in ecosystems. Biodiversity, population dynamics.
Unit 4
Air Pollution, Noise Pollution and Solid Waste Management: Air Pollution, Harmful effects of
Air Pollution, Control of Air Pollution. Noise Pollution, Harmful effects of noise pollution,
control of noise pollution. Global warming, Acid rain, Ozone depletion. Solid Waste

and 2nd
16 | P a g e
Management, Classification of solid waste, Collection, transportation, treatment, and disposal of
solid waste. Economic recovery of solid waste. Sanitary landfill, on site sanitation.
Unit 5
Water Pollution: Water pollution, Harmful effects of water pollution, control of water pollution.
Waste water management, Treatment & disposal of wastewater. Reuse and saving in use of
water, rain water harvesting.
Corrosion: Definition and its significance. Mechanisms of Chemical (Dry) and Electrochemical
(Wet) corrosion. Protection from corrosion, Protective coatings, cathodic protection, sacrificial
anode and modification in designs.
Suggested Readings
1. Chemistry of water treatment, Samuel Faust & Osman M Aly, CRC Press
2. Boilers water treatment. Principles and Practice, Colin Frayne, CRC Press
3. Corrosion Understanding the Basic, by Joseph R Davis, ASM International
4. Atmospheric pollution, by W Buch , Tata McGraw Hill(TMH)
5. Introduction to Environmental Science, by G Tyler Miller and Scott Spoolman, Cengage
Learning
6. Introduction to Environmental Engineering, by Mackenzie L Davis and David A
Cornwell, Tata McGraw Hill(TMH)
205 ENGINEERING MECHANICS
Unit 1
Statics Of Particles and Rigid Bodies: Fundamental laws of mechanics, Principle of
transmissibility, System of forces, Resultant force, Resolution of force, Moment and Couples,
Varignon's Theorem, Resolution of a force into a force and a couple, Free body diagram,
Equilibrium, Conditions for equilibrium, Lami's theorem.
Virtual work: Principle of Virtual Work, Active forces and active force diagram.
Unit 2
Centroid & Moment of Inertia: Location of centroid and center of gravity, Moment of inertia,
Parallel axis and perpendicular axis theorem, Radius of gyration, M.I of composite section, Polar
moment of inertia, M.I of solid bodies.
Lifting Machines: Mechanical advantage, Velocity Ratio, Efficiency of machine, Ideal machine,
Ideal effort and ideal load, Reversibility of machine, Law of machine, Lifting machines; System
of Pulleys, Simple wheel and axle, Wheel and differential axle, Weston’s differential pulley
block, Worm and worm wheel, Single purchase winch crab.
Unit 3
Friction: Types of Friction, Laws of friction, Angle of friction, Angle of repose, Ladder, Wedge,
Belt Friction.
Belt Drive: Types of belts, Types of belt drives, Velocity ratio, Effect of slip on Velocity ratio,
Length of belt, Ratio of tensions and power transmission by flat belt drives.
Unit 4

and 2nd
17 | P a g e
Kinematics of Particles and Rigid Bodies: Velocity, Acceleration, Types of Motion, Equations of
Motion, Rectangular components of velocity and acceleration, Angular velocity and Angular
acceleration, Radial and transverse velocities and accelerations, Projectiles motion on plane and
Inclined Plane, Relative Motion.
Kinetics of Particles and Rigid Bodies: Newton's laws, Equation of motion in rectangular
coordinate, radial and transverse components, Equation of motion in plane for a rigid body,
D'Alembert principle.
Unit 5
Work, Energy and Power: Work of a force, weight, spring force and couple, Power, Efficiency,
Energy, Kinetic energy of rigid body, Principle of work and energy, Conservative and Non-
conservative Force, Conservation of energy.
Impulse and Momentum: Linear and angular momentum, Linear and angular impulse, Principle
of momentum for a particle and rigid body, Principle of linear impulse and momentum for a
particle and rigid body, Principle of angular momentum and Impulse, Conservation of angular
momentum, Angular momentum of rigid body.
Suggested Readings
1. Vector Mechanics for Engineers, Beer and Johnston, Tata McGraw-Hill.
2. Engineering Mechanics, Hibbeler, Pearson Education.
3. Engineering Mechanics, Meriam and Kraige, John Wiley & Sons.
4. Engineering Mechanics, Timoshenko and Young, Tata McGraw-Hill.
5. Engineering Mechanics, Shames, Pearson Education.
6. Engineering Mechanics, Boresi and Schmidt, CL-Engineering.
7. Engineering Mechanics, Andrew Pytel & Kiusalas, Cengage Learning.
206 FUNDAMENTAL OF COMPUTER PROGRAMMING
UNIT – 1
Programming in C: Structure of C Program, Concept of Preprocessor, Macro Substitution,
Intermediate code, Object Code, Executable Code. Compilation Process,
Basic Data types, Importance of braces ({ }) in C Program, enumerated data type, Identifiers,
Scope of Variable, Storage Class, Constants, Operators & Expressions in C, Type Casting,
printf( ) and scanf ( ) with format specifires, reading single character.
UNIT – 2
Control Statements, Command Line Arguments, Arrays in C, Pointers, Using pointers to
represent arrays, Pointer & address arithmetic. Structures, using typedef.
UNIT – 3
Arrays of Structures & pointers, File Handling (fscanf, fprintf, feof, fopen, fclose, fread, fwrite
only). Dynamic memory Allocation.
UNIT – 4
Functions in C, Passing Parameters (By value & Reference), using returned data, Passing arrays,

and 2nd
18 | P a g e
structures, array of structures, pointer to structures etc., passing characters and strings, The void
pointer.
UNIT – 5
Stored Program Architecture of Computers, Storage Device- Primary Memory and Secondary
Storage, Random, Direct, Sequential access methods. Concept of High-Level, Assembly and
Low Level programming languages. Representing Algorithms through flow chart, pseudo code,
step by step.
Number System: Data Representation, Concept of radix and representation of numbers in radix r
with special cases of r=2, 8, 10 and 16 with conversion from radix r1 to radix r2. r’s and (r-1)’s
complement, Representation of alphabets.
Suggested Readings
1. Ritchie & Kernighan, The C Programming language, 2nd Ed., PHI.
2. Dey & Ghosh, Computer Fundamentals and programming in C, Oxford.
3. Kamthane, Programming in C, 2nd Ed., Pearson.
4. Schildt, The Complete Reference, 4th Ed., TMH.
5. Balaguruswamy, Programming in ANSI C, 5th Ed., TMH.
6. V. Rajaraman, Fundamentals of Computers, 5th Ed. PHI, 2011.
7. Forouzan et.al, Computer Science, 3rd Ed. Cenage Learning.
207 ENGINEERING PHYSICS LAB-II
1. To determine the height of water tank with the help of a Sextant.
2. To determine the dispersive power of material of a Prism for Violet Red and yellow colours
of Mercury light with the help of a spectrometer.
3. To measure the Numerical Aperture of an Optical Fibre.
4. To determine the ferromagnetic constants retentivity, permeability and susceptibility by
tracing B-H curve using C.R.O.
5. To study the Charge & Discharge of a condenser and hence determine time constant (Both
current and voltage graphs are to be plotted.
6. To determine the high resistance by method of leakage, using a Ballistic galvanometer.
7. To verify the expression for the resolving power of a Telescope.
8. To determine the specific resistance of the material of a wire by Carey Fosters bridge.
9. To determine the specific resistance of the material of a wire by Carey Fosters bridge.
208 CHEMISTRY & ENVIRONMENTAL ENGINEERING LAB
1. To determine the hardness of water by HCL method.
2. To determine the hardness of water by EDTA method.
3. Determination of CO2 in a water sample.
4. Measurement of pH of a given sample by pH-meter.
5. To determine free and residual chlorine in a given water sample.
6. Measurement of dissolves oxygen in water.
7. Measurement of conductivity of a given sample by conductivity meter.

and 2nd
19 | P a g e
8. Measurement of fluoride in water.
9. Measurement of nitrate in water.
10. Determination of sulphate in water.
11. Evaluation of Reverse Osmosis(RO) Process by TDS measurement.
209 COMPUTER PRAGRAMMING LAB
S.No. Concept to be covered in the exercise
1. Simple OS Commands, vi editor, compiling program, compiler options, linking libraries.
2. Simple input output program, integer, real, character and string. (Formatted & Unformatted),
Using Command Line Arguments.
3. Conditional statement (if, if-else-if, switch-case)
4. Looping & iterations (for, while, do-while, continue, break)
5. Using Arrays (one, two and three dimensional)
6. Using Structures and Union.
7. Program using Function (with and without recursion), passing parameters by value &
reference.
8. Using pointers.
9. File handling.
210 MACHINE DRAWING
Introduction to machine drawing
Dimensioning, locations and placing.
Orthographic projections: First & third angle methods
Sheet 1: Orthographic Projections (3 Problems)
Sheet 2: Sectional Views (3 Problems)
Sheet 3: Riveted joints, lap joints, butt joints, chain riveting, zig-zag riveting
Sheet 4: Screw fasteners, different threads, Nuts & bolts locking devices, set screws,
foundation
Sheet 5: Bearing, Plumber block
Instructions on free hand sketches
List of free hand sketches
• Different type of lines
• Conventional representation of materials
• Screw fasteners
• Bearing: Ball, roller, needle, foot step bearing
• Coupling: Protected type, flange, and pin type flexible coupling
• Welded joints
• Belts and pulleys
• Pipes and pipe joints
• Valves
Suggested Readings
1. Machine Drawing, Lakshminarayan, Jain Brothers.

and 2nd
20 | P a g e
2. Machine Drawing, N.D.Bhatt, Charotar Publishing House Pvt. Ltd.
211 COMMUNICATION TECHNIQUES LAB
1. Phonetic Symbols and Transcriptions
2. Word Formation
3. Affixes
4. Listening and speaking Skills.
5. Words often Mis-spelt and Mis- Pronounced
6. One Word for Many.
7. Synonyms and Antonyms.
8. Seminar Presentation.
9. Group Discussion.
10. Job Interview
Suggested Readings and Packages
1. Advanced Manual for Communication Laboratories and Technical Report Writing, D.
Sudha Rani, Pearson, (New Delhi)
2. A Course in Phonetics and Spoken English, J. Sethi & P.V. Dhamija, PHI Learning Pvt.
Ltd. (New Delhi)
3. English Language Laboratories: A Comprehensive Manual, Nira Konar, PHI Learning
Pvt .Ltd. (New Delhi)
4. Communication Skills for Engineers and Scientists, Sangeeta Sharma and Binod Mishra,
PHI Learning Pvt. Ltd.(New Delhi).
5. Oxford English Learning Package.(With CDs: Headway Series)
6. Tata McGraw Hills English Learning Package (With CDs)
7. “Oxford Advanced Learners’ Dictionary” published by Oxford University Press (New
Delhi)
212 DISCIPLINE & EXTRA CURRICULAR ACTIVITIES (DECA)
Component – A Discipline: 25 Marks
The marks shall be deducted from this component for those who shall involve themselves in
indiscipline/undesirable/Ragging activities or in case of penalty of marks imposed by Standing
Disciplinary Committee (SDC) and approved by Head of the Institution concerned subject to a
maximum of 25 marks.
Component – B Extra Curricular Activities: 25 Marks
Marks shall be awarded for the participation of students in various Extra Curricular Activities
organised by the respective institutions as per the following, subject to a maximum of 25 marks.
In case student does not participate in any of the Extra Curricular Activities, he/ she shall be
awarded zero(0) marks in DECA - Component B.
(i) National Cadet Corps (NCC).
(ii) National Service Scheme (NSS)

and 2nd
21 | P a g e
(iii) Scouts & Guide
(iv) Sports Activities
(v) Literary Activities & model
(vi) Cultural Activities
(vii) Paper Presentation/ Participation in National Conferences/ Seminars/ Workshops etc.
(viii) Blood Donation
(ix) Participation in activities of College Annual day Celebration.
(x) Organising/ Participation/ Volunteer in different activities organised by the
departments/ institute
(xi) Organising/ Participation in activities of Students Chapters of ISTE, IE (I), IEEE,
IETE, Vivekanand Kendra etc.

First year scheme_and_syllabus_effective_from_2012-13n1

More Related Content

Viewers also liked (7)

Similar to First year scheme_and_syllabus_effective_from_2012-13n1 (20)

First year scheme_and_syllabus_effective_from_2012-13n1