Fleetguard Filter ประเทศไทย

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
HF6500 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
HF6600 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15
HF6700 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-21
HF6800 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-31
Dual Spin-On Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 10-35

10-3cumminsfiltration.com
Introduction
Hydraulic Filtration Systems
Cummins Filtration®
offers an extensive line of Fleetguard®
mobile and industrial hydraulic filter replacements for competitors
such as Donaldson®
, Fairey Arlon, Hycon, Pall, Parker Hannifin, Schroeder, and Vickers®
. Every hydraulic element is designed
and manufactured to the highest standard of quality and meets or exceeds global OEM specifications. You can expect high
system performance, design flexibility and product quality to meet your needs.
Proper oil cleanliness levels are critical clearances on components in the hydraulic fluid stream. In our state-of-the-art testing
facilities, Cummins Filtration performs multi-pass, pressure-drop, flow-fatigue, and hydrostatic burst testing on all hydraulic
elements to ensure product reliability and top performance.
We offer many choices of filtration media and micron rating efficiencies. Our high performance synthetic products can replace
cellulose elements and provide up to 100 times the filtration of fine particles without sacrificing any dirt-holding capacity. The
numerous benefits of these products include longer component life that reduces operating expenses and maintenance hassles.
Hydraulic filter elements are also available for petroleum-base and water-base fluid compatibility, and filter heads come in
multiple inlet and outlet port sizes and with various by-pass valve settings to meet specific requirements.
Depending on the model, Fleetguard hydraulic filter systems include the following capabilities from the HF6500 through to the
HF6800 Series :
• Rated flows range: 37 gal/min (140 L/min) to 55 gal/min (208 L/min)
• Maximum static pressures range: 350 lb/in2
(2413 kPa) to 700 lb/in2
(4826 kPa)
• Recommended working pressures: 250 lb/in2
(1724 kPa) to 400 lb/in2
(2758 kPa)
Our extensive line of replacement hydraulic filters for spin-on applications meets the following specifications:
• Rated Fatigue Strength (NFPA Standard T2.6.1 - 1974 Category 1/90) 1,000,000 cycles @ 0-350 PSID (0-2413.2 kPa);
300,000 cycles @ 0-400 PSID (0-2757.9 kPa); 100,000 cycles @ 0-500 PSID (0-3447.4).
• Rated Static Pressure (NFPA Standard T2.6.1 - 1974 Category 1/90); 1,000 PSID (6894.8 kPa)
• Element Collapse Pressure Rating (ANSI B93.25/ISO 2941)
Depend on Cummins Filtration to meet all your hydraulic and transmission system needs with the best products that deliver the
highest performance and greatest reliability.

10-4 cumminsfiltration.com
Selecting the Correct Fleetguard®
Filter
The following description of Cummins Filtration®
specifications for Fleetguard filters allows you to be certain that you select the
correct filter to meet your hydraulic system needs.
Filtration Efficiency
ISO (International Organization for Standardization), NFPA (National Fluid Power Association) and ANSI (American National
Standards Institute) use beta ratio to qualify the filtration efficiency of filters. The standard for evaluating filter contaminant
holding capacity and filtration efficiency is ISO 16889-1999, “Hydraulic Fluid Power Filters – Multi-pass Method for Evaluating
Filtration Performance of a Filter Element.” It is based on the ISO 11171-1999 particle count calibration method which uses
µm(c) as the standard unit. The previous standard, ISO 4572-1981, was based on the ISO 4402-1991 particle count calibration
method which used µm as the standard unit. For example, 2 µm, 5 µm, 10 µm, and 15 µm become (approximately) 4 µm(c),
6 µm(c), 10 µm(c), and 15 µm(c), respectively under the new standard. For more information on the change from
ISO 4572-1981 to ISO 16889-1999 and the change from µm to µm(c) units, see ISO TR16186-1999.
The Beta ratio (β) is determined by counting the number of particles over a given size upstream of the filter and dividing that
number by the number of particles over the given size down stream of the filter.
Example: If a filter has 1000 particles 10 microns and larger upstream and 50 particles down stream, the β is 20.
β10
= 20
Efficiency is calculated using the formula below, the table shows the efficiencies.
Efficiency = 100 - ( )
β 5(c)
2 5 10 20 30 50 75 100 200 1000
Efficiency % 50 80 90 95 96.67 98 98.67 99 99.5 99.9
The β for a given media varies somewhat as the filter is used and becomes plugged with contaminant. Due to this variation in the
β, Cummins Filtration uses a time-weighted average β.
Flow Versus Differential Pressure
All flow versus differential pressure data contained in this catalog is based on using 32 mm2
/s hydraulic fluid in a clean filter
assembly.
For element ∆P at viscosity other than shown:
∆P = (∆P from graph) x ( )x ( )
Rated Static Pressure (per ANSI/(NFPA) T2.6.1)
Rated static pressure indicates the minimum pressure at which leakage of the filter will occur using Fleetguard heads.
Recommended Maximum Operating Pressure (Non-Shock)
Cummins Filtration determines safe operating pressure for non-shock systems. All operating pressures indicated in this catalog
were obtained using Fleetguard heads. We recommend that you contact Cummins Filtration Technical Assistance with any
questions regarding safe operating conditions.
Fabrication Integrity (per ISO 2942)
Fleetguard hydraulic filters are tested in accordance with ISO 2942.
1000 Particles Upstream
50 Particles Downstream
100
β
New Viscosity in mm2
/s
150
New Specific Gravity
0.9
Introduction

Selecting a Filter and Head Assembly
1. Select the particle size and media from the chart on the following page.
2. Select the working pressure of the filter element.
3. Select the maximum flow rating of the system in gallons per minute.
4. When selecting a filter to match the flow rate, try to choose a filter that has your desired flow at 2-8 PSID (13.8-55.2 kPa)
clean pressure drop. This will give you a more satisfactory life than a filter with higher flows and higher clean pressure drops.
Avoid selecting a filter that will have a clean pressure drop in excess of 9 PSID (62.1 kPa). Short filter life may be the result.
See the flow charts with each filter series.
Choice of Filter Heads is Dependent Upon the Filter Selected
1. Select the filter head from the tables that accompany the filter series that you select.
Use only heads that accompany those filters.
2. Select the head by-pass valve option, see “By-Pass Valve Options” below.
3. Select the port-size thread options.
By-Pass Valve Options
The head by-pass valve options available are: NONE, 4 PSID (27.6 kPa), 25 PSID (172.4 kPa), and 44 PSID (303.4 kPa).
It is recommended that you use a 4 PSID (27.6 kPa) head in applications where the head/filter combination will be used as a
suction (pump inlet) filter.
In applications where the by-pass valve option is NONE, the head should be used with a differential pressure gauge to determine
when to service the filter.
CAUTION: Failure to use a differential pressure gauge where the by-pass valve option is NONE will result in an element
collapse or burst when the element becomes fully plugged.
Locations are available to drill and tap the heads for these gauges (not all heads have this option). Gauges are not supplied by
Cummins Filtration®
.
For most applications, heads with 25 PSID (172.4 kPa) by-pass valves will be satisfactory. Gauge ports can be drilled and
tapped. Electric indicators preset for 15 PSID (103.4 kPa) are offered. Indicators will trigger when the filter element is 90-95%
plugged. Filters should be serviced at this time.
For our HF6800 series heads and filters, 44 PSID (303.4 kPa) by-pass valves are standard. Electric indicators preset at 28 PSID
(193.1 kPa) are optional and can be ordered separately (part number HH6978). Indicators will trigger when the filter element in
90-95% plugged. Filters should be serviced at this time.
Port sizes are given in the size of the threads, not the internal line size.
Introduction

Introduction
How to Select the Correct Media and Micron Size for Your Application
How to Use the Media/ISO Chart
The numbers with slashes (“/”) at the top of each bar in the chart represent the ISO Solid Contamination Code. The first number
is an indication of the number of contaminant particles that are 4 micron(c) and larger that can be contained in a volume of
hydraulic fluid. The second number indicates the number of contaminant particles that are 6 micron(c) and larger that can be
contained in the same volume. The third number indicates the number of contaminant particles that are 14 micron(c) and larger
that can be contained in the same volume. The code looks like this: “20/18/14.” The smaller these three numbers, the cleaner
the hydraulic system and/or the more demanding the system is for cleanliness. Component manufacturers specify the desired
ISO code for the component parts and systems they build. To select the most suitable media, determine the ISO code for the
MOST SENSITIVE component part(s) as specified by the component manufacturer. If the ISO code is in the range of 15/13/9 to
21/19/15, select an FG2000™ Synthetic Media (a high pressure synthetic media which, given identical efficiency performance,
possesses lower restriction and higher capacity characteristics) by reading the “x=?” underneath the bar that represents the ISO
code. A suitable ISO code (and media) can be determined by knowing the Maximum System Pressure and the Sensitivity Range
of the system. Consult the Hydraulic Component Categories to determine the system’s sensitivity based on application. For
example, if the target pressure is 3000 lb/in2
and the application is “Construction Equipment,” the ISO code is 17/15/11 and the
media is x=7. Then select a filter that has FG2000 Synthetic Media rated at b7(c)
=75.
Media/ISO Chart
0
1
2
3
4
5
x=32x=29x=21x=11
Low Average
x=11x=7
FG2000™ Synthetic Media
βx(c) = 75
Maximum System Pressure
lb/in2x1000
Component Sensitivity
Cellulose Media
βx(c) = 20
x=7x=5x=5
23/21/17
22/20/16
21/19/15
20/18/14
19/17/13
18/16/12
17/15/11
16/14/10
15/13/9
Hydraulic Component Categories
Low
Low Pressure Industrial
Machines
Large Clearances
Older Hydraulic Machinery
Small Tractor Hystat
Least Silt Sensitive
Average
Automotive Manufacturing
Mining Equipment
Construction Equipment
Paper Mills
Machine Tools
Less Silt Sensitive
High
Aerospace
Robotics
Laboratory
Aircraft
Machine Tools
Servo Controls
Very Silt Sensitive

Introduction
Fluid Compatibility
The two primary hydraulic fluid types are mineral based and fire retardant. Mineral based (or petroleum based) fluids represent
the most commonly used hydraulic fluid type. Fire retardant fluid types include water glycols, water in oil emulsions, high water
based fluids (HWBF) and phosphate esters. Filter compatibility with specific fluid types is determined by component material
type. The chart below summarizes fluid compatibility and component material relationships. For most fluids, more than one
compatible component material option exists. For seal options, the most economically optimum material for most fluids is
Buna N.
Fluid Seal Material Media
Petroleum
Buna N
Fluorocarbon
FG2000™*
Cellulose**
Water Glycol
Buna N
Fluorocarbon
Ethylene Propylene Rubber
FG2000*
Cellulose**
Water in Oil
Emulsion
Buna N
Fluorocarbon
FG2000*
Cellulose**
HWBF
Buna N
Fluorocarbon
FG2000*
Cellulose**
Industrial Phosphate
Ester (ARYL)
Fluorocarbon
Ethylene Propylene Rubber
FG2000*
* FG2000™ is a high pressure synthetic media. Given identical efficiency performance, this media possesses lower restriction and higher capacity characteristics.
** It is recommended to use FG2000 media with water-based fluids. Unsuitable cellulose grades will tend to disintegrate in application.

Notes

Specification HF6500 Series – Style A HF6500 Series – Style B
Rated Flow Up to 37 gal/min (140 L/min) See Ordering Information
Maximum Static Pressure 350 lb/in2
(2413 kPa) 260 lb/in2
(1800 kPa)
Recommended Working Pressure
(Non-shock operating conditions)
250 lb/in2
(1724 kPa) 175 lb/in2
(1200 kPa)
Seals Buna N Buna N
Filter Service Clearance Min. 0.64" (1.63 mm) Min. 0.64" (1.63 mm)
Note: lb/in2
is the standard SI notation for psi.
Specifications subject to change without notice.
Housing
Housing with
Check Valve
Style A
(NPT Port Connections)
Style B
(BSP Port Connections)
Specifications
HF6500Series

Filter Head
Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa)
Indicator
Type*
HH6943
3/4" NPTF
None None
HH6944 4 (27.6) None
HH6945 25 (172.4) None
HH6946
1" NPTF
None None
HH6947 4 (27.6) None
HH6948 25 (172.4) None
* Can be drilled and tapped for pressure and/or vacuum gauges.
Part Description Part Number
A Filter Head See Ordering Information
B Filter Element See Ordering Information
Parts List – Style A
A
B
A
B
HF6500 Series Hydraulic Filters
Ordering Information – Style A
Filter Head
Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa)
Rated Flow
gal/min
(L/min)
Application*
ST1024HH
3/4" BSP
3.6 (25) 6.6 (25) Suction Line
ST1025HH 25.4 (175) 23.7 (90) Return Line
* Units are pre-drilled with 1/8" BSP tappings for the installation of pressure and/or
vacuum gauges. See ordering information below.
Ordering Information – Style B
Part Number Description
ST1429MA Vacuum gauge for suction line application
ST1398MR Pressure gauge for return line application
Optional Clogging Indicators – Style B Only
Clogging Indicator (not shown) See Ordering Information
Parts List – Style B

Part Number b x(c)
> 200 b x(c)
> 75 b x(c)
> 2 Media
Element Length
in (mm)
Fluid Compatibility
Style A
HF6500 N/A 11 4 Cellulose/Synthetic 5.68 (144.27) Petroleum Base
HF6510 38 47 14 Cellulose 5.68 (144.27) Petroleum Base
HF6511 38 47 14 Cellulose 8.00 (203.20) Petroleum Base
HF6522 – 140 – Wire Mesh 5.68 (144.27) Petroleum and Water Base
HF6523 – 140 – Wire Mesh 8.00 (203.20) Petroleum and Water Base
Style B
HF6535 – 14 5 Cellulose 5.78 (147) Petroleum Base
HF6539 6 5 – FG2000™* 5.78 (147) Petroleum and Water Base
HF6541 12 10 6 FG2000™* 5.78 (147) Petroleum and Water Base
ST1813 – 90 – Wire Mesh 5.78 (147) Petroleum and Water Base
Mounting/Dimensions
Replacement Filters
3.02
(76.71)
Service
Clearance
0.64 (16.26)
1/4-20 UNC-2B
Threads (2X)
1.90
(48.26)
1.63
(41.40)
OUT
IN
1.30
(33.02)
3.67 (93.22)
1-12 UNF-2A Thread
3.62 (91.95)
3.73 (94.74)
All dimensions are in inches (millimeters)
Style A
Service
Clearance
0.64 (16.26)
Mounting Holes (2X)
M10 X 1.5
Gauge Ports (4X)
1/8" BSP
1.50
(38.0)
2.24
(56.8)
3.67 (93.22)
1-12 UNF-2A Thread
3.74 (95.0)
3.72 (94.49)
All dimensions are in inches (millimeters)
Style B
See Ordering
Information
for Available
Port Sizes
See Ordering
Information
for Available
Port Sizes
See
Replacement
Filters Chart
for Element
Length
See
Replacement
Filters Chart
for Element
Length
Hydraulic Filters HF6500 Series

HF6500
Rated Flow: 8 gal/min (38 L/min)
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6511
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6521
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
Assembly with 3/4" (19.05 mm) Ports
Rated Flow: @ 5 PSID (34 kPa) Across Filter
Flow/Pressure: 32 mm2/s
Legend
Assembly with 1" (25.4 mm) Ports
Element
HF6510
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6520
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
Performance

Performance
Legend
Assembly with 3/4" (19.1 mm) BSP Ports
Element
HF6535
Rated Flow: 11.78 gal/min (44.6 L/min)
0 10 15 20 255
0 10 15 20 255
0 10 15 20 255
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
HF6539
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
HF6537
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 20 40 60 8010 30 50 70 10090
HF6536
0 10 15 20 255
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 20 40 60 8010 30 50 70 10090
0 20 40 60 8010 30 50 70 10090
0 20 40 60 8010 30 50 70 10090
0 10 15 20 255
HF6538
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 20 40 60 8010 30 50 70 10090
0 10 15 20 255
HF6541
20
0
40
80
60
20
0
40
80
60
20
0
40
80
60
20
0
40
80
60
20
0
40
80
60
20
0
40
80
60
0 20 40 60 8010 30 50 70 10090
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)

Performance
Legend
Assembly with 3/4" (19.1 mm) BSP Ports
Element
0 10 15 20 255
HF6544 and HF6591
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 20 40 60 8010 30 50 70 10090
0 10 15 20 255
HF6542
20
0
40
80
60
20
0
40
80
60
0 20 40 60 8010 30 50 70 10090
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)

Specification HF6600 Series
Rated Flow Up to 35 gal/min (132 L/min)
(3448 kPa)
300 lb/in2
(2068 kPa)
Seals Buna N
Filter Service Clearance Min. 1.30" (33.02 mm)
Housing
Housing with
Check Valve
Note: lb/in2
Specifications
HF6600Series

Parts List
Filter Head
Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa)
Indicator
Type
HH6926
1-5/16" 12 SAE
None None
HH6930 25 (172.4) None
HH6931
1-1/16" 12 SAE
None Electric*
HH6932 None None
HH6935 25 (172.4) Electric*
HH6936 25 (172.4) None
HH6938
3/4" 14 NPTF
None None
HH6942 25 (172.4) None
* Electric indicator is set at 15 PSID (103.4 kPa).
Ordering Information
A
B

Part Number b x(c)
> 200 b x(c)
> 75 b x(c)
> 2 Media
Element Length
in (mm)
Fluid Compatibility
HF6603** 6 5 N/A FG2000™* 5.88 (149.35) Petroleum and Water Base
HF6604** 6 5 N/A FG2000* 8.00 (203.20) Petroleum and Water Base
HF6612** 13 11 6 FG2000* 5.88 (149.35) Petroleum and Water Base
HF6630 16 13 4 FG2000* 5.88 (149.35) Petroleum and Water Base
HF6610 N/A 47 14 Cellulose 5.88 (149.35) Petroleum Base
** Has epoxy potting material.
Mounting/Dimensions
Replacement Filters
Service
Clearance
1.30 (33.02)
5/16-18 UNC-2B
Thread (3X)
2.12
(53.85)
2.13
(54.10)
3.67 (93.22)
1 1/2-16 UN-2A Thread
4.20 (106.68)
3.73 (94.74)
2.00 (50.80)
All dimensions are
in inches (millimeters)
See Ordering
Information
for Available
Port Sizes
See
Replacement
Filters Chart
for Element
Length

Performance
HF6600
HF6601
HF6603
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
Assembly with 1-1/16" (26.99 mm)
and 3/4" (19.05 mm) Ports
Legend
Assembly with 1-5/16" (33.34 mm) Ports
Element
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6604
Rated Flow: 39.63 gal/min (150 L/min)
10
0
20
30
0 10 20 30 50
0 38 76 114 190
40
151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6607
10
0
20
30
0 10 20 30 50
0 38 76 114 190
40
151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6606
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)

HF6621 and HF6633
Legend
Element
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6612
HF6620, HF6625, HF6630 and HF6632
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6611
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6610
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6613
10
0
20
30
0 10 20 30 50
0 38 76 114 190
40
151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
Performance

Performance
HF6631
Legend
Element
10
0
20
30
0 10 20 30 40
0 38 76 114 151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6626
10
0
20
30
0 10 20 30 50
0 38 76 114 190
40
151
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)

Specification HF6700 Series – Styles A and B HF6700 Series – Style C
Rated Flow Up to 55 gal/min (208 L/min) See Ordering Information
(2068 kPa) 260 lb/in2
(1800 kPa)
200 lb/in2
(1379 kPa) 175 lb/in2
(1200 kPa)
Seals Buna N Buna N
Filter Service Clearance Min. 1.50" (38.10 mm) Min. 1.50" (38.10 mm)
Specifications
Style A
Style B
Housing
Housing with
Check Valve
Note: lb/in2
Style C
(BSP Port Connections)
HF6700Series

Parts List – Style A
Filter Head
Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa)
Indicator
Type*
HH6962
1-1/4" NPTF
None None
HH6963 4 (27.6) None
HH6965 25 (172.4) None
HH6967
1-1/2" NPTF
None None
HH6968 4 (27.6) None
HH6970 25 (172.4) None
HH6972
1-5/8" NPTF
25 (172.4) None
HH6973 None None
* Can be drilled and tapped for pressure and/or vacuum gauges.
Ordering Information – Style A
Parts List – Style B
Filter Head Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa) 
Indicator
Type
HH6951
1-5/16" 12 SAE
None None
HH6954 25 (172.4) Electric*
HH6955 25 (172.4) None
HH6956
1" NPTF
None Electric*
HH6957 None None
HH6959 4 (27.6) None
HH6960 25 (172.4) Electric*
HH6961 25 (172.4) None
Ordering Information – Style B
A
B
A
B
A
B

Ordering Information – Style C
Clogging Indicators – Style C Only
Parts List – Style C
Filter Head
Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa)
Rated Flow
gal/min
(L/min)
Indicator
Type*
ST1028HH
1-1/4" BSP
4 (25) 13 (50)
Vacuum
Gauge
ST1029HH 25 (175) 58 (220)
Pressure
Gauge
ST1297HH 51 (350) 58 (220)
Pressure
Gauge
A
B

Part Number1
b x(c)
> 200 b x(c)
> 75 b x(c)
> 2 Media
Element Length
in (mm)
Fluid Compatibility
Styles A and B
HF67032
6 5 N/A FG2000™ 4
6.63 (168.40) Petroleum and Water Base
HF67042
6 5 N/A FG20004
HF67062
8 7 N/A FG20004
HF67072
8 7 4 FG20004
HF67122
13 11 6 FG20004
HF67132
13 11 6 FG20004
HF67252
25 21 9 FG20004
HF67262
25 21 9 FG20004
HF6730 N/A 11 6 FG20004
HF6731 N/A 11 6 FG20004
HF6732 N/A 25 10 FG20004
HF6733 N/A 29 10 FG20004
HF6722 – 3
140 – 3
Wire Mesh 6.63 (168.40) Petroleum and Water Base
HF6723 – 3
140 – 3
Wire Mesh 10.63 (270.00) Petroleum and Water Base
Style C
HF6177 – 26 10 Cellulose 7.09 (180.00) Petroleum Base
HF7980 14 10 5 Glass Fiber 7.09 (180.00) Petroleum and Water Base
ST1917 14 10 5 Glass Fiber 8.94 (227.00) Petroleum and Water Base
ST1814 – 90 – Wire Mesh 7.09 (180.00) Petroleum and Water Base
1
Other seals can be ordered separately:
Part number 3312097 S – RECTANGULAR Cross Section Seal
Part number 3830114 S – SQUARE CUT Viton Seal
2
Has epoxy potting material.
3
These elements are made with 100 mesh screen (140 micron, absolute) and are not multi-pass tested.
4
FG2000™ is a high pressure synthetic media. Given identical efficiency performance, this media possesses lower restriction and higher capacity characteristics.
Replacement Filters

Mounting/Dimensions
2.50
(63.50)
1.82 (46.23)
5.33
(135.38)
2.66
(67.56)
1.97
(50.0)
1.18
(30.0)
0.28
(7.0)
5.24 (133.0)
5.33 (135.38)
1.50
(38.1)
0.75
(19.1)
1.38
(35.0)
All dimensions are
Service
Clearance
1.50 (38.10)
See
Replacement
Filters Chart
for Element
Length
Service
Clearance
1.50 (38.10)
1-1/2-16 UN-2A Thread
5.08 (129.03)
1-1/4” BSP Thread
See
Replacement
Filters Chart
for Element
Length
5.06 (128.52)
OUT
IN
See Ordering
Information
for Available
Port Sizes
Style A
Service
Clearance
1.50 (38.10)
3/8-16 UNC-2B Thread (3X)
5.34
(135.64)
3.85
(97.79)
1.98 (50.29)
5.06 (128.52)
5.60 (142.24)
3.20
(81.28)
See
Replacement
Filters Chart
for Element
Length
See Ordering
Information
for Available
Port Sizes
Style B
Style C
See Ordering
Information
for Available
Port Sizes
Mounting Holes (2X)
M8 X 1
Gauge Ports (4X)
1/8” BSP

Performance
Legend
Element
HF6700
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6701
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6703
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6706
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6707
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6704
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)

Performance
Legend
Element
HF6712
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6713
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6711
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6710
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6720
HF6721
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)

Performance
Legend
Element
HF6732
HF6733
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6725 and HF6730
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6726 and HF6731
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)

Performance
Legend
Assembly with 1-1/4" (32 mm) BSP Ports
Element
HF6359
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
HF6177
0 40 80 120 16020 60 100 140 2001800 40 80 120 16020 60 100 140 200180
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 20 30 40 5010
HF35082
0 40 80 120 16020 60 100 140 200180
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 20 30 40 5010
0 20 30 40 5010
ST1917
20
0
40
80
60
20
0
40
80
60
20
0
40
80
60
20
0
40
80
60
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 40 80 120 16020 60 100 140 200180
0 20 30 40 5010
HF7835
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 40 80 120 16020 60 100 140 200180
0 20 30 40 5010
20
0
40
80
60
HF7980
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 40 80 120 16020 60 100 140 200180
0 20 30 40 5010
20
0
40
80
60

Notes

Specification HF6800 Series
Rated Flow Up to 40 gal/min (151 L/min)
(4826 kPa)
400 lb/in2
(2758 kPa)
Seals Buna N
Specifications
Housing with
Check Valve
Note: lb/in2
HF6800Series

Parts List
Filter Head Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa)
Indicator
Type
HH6977 1-5/16" 12 SAE 44 (303.4) None
HH6978 1-5/16" 12 SAE 44 (303.4) Electric*
A
B

Part Number b x(c)
> 200 b x(c)
> 75 b x(c)
> 2 Media
Element Length
in (mm)
Fluid Compatibility
HF6802 21 18 7 FG2000™ 8.22 (208.79) Petroleum and Water Base
HF6807 10 7 4 FG2000 11.71 (297.43) Petroleum and Water Base
Mounting/Dimensions
Replacement Filters
* Has epoxy potting material.
Service
Clearance
1.50 (38.10)
1.50
(38.10)
3.20
(81.28)
1.88
(47.75)
1-1/2-16 UN-2A Thread
4.89 (124.21)
5.54 (140.72)
All dimensions are
OUT
IN
See Ordering
Information
for Available
Port Sizes
See
Replacement
Filters Chart
for Element
Length

Performance
HF6813
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
Legend
Element
HF6802
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6824
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)
HF6807
10
0
20
30
0 20 40 60 8010 30 50 70
0 76 11438 151 189 227 265 303
Flow Rate (gal/min)
Flow Rate (L/min)
0
69
138
207
PressureDrop(PSID)
PressureDrop(kPa)

Specification Dual Spin-On Assembly
Rated Flow See Ordering Information
(1800 kPa)
175 lb/in2
(1200 kPa)
Seals Buna N
Specifications
Housing
Housing with
Check Valve
Note: lb/in2
DualSpin-OnAssembly

ST1750IC Differential Pressure pop-up Indicator
Clogging Indicators
B Filter Elements See Ordering Information
Parts List
Filter Head
Part
Number
Fluid
In & Out
Port Size
By-Pass
Setting
PSID (kPa)
Rated Flow
gal/min
(L/min)
Indicator
Type*
ST1927HH
1-1/2" BSP
Closed
By-Pass
34.3 (130)
Vacuum
Gauge
ST1416HH 1200 (175) 118.9 (450)
Pressure
Gauge
Dual Spin-On Assembly Hydraulic Filters
A
B

Part Number1
b x(c)
> 200 b x(c)
> 75 b x(c)
> 2 Media Element Length Fluid Compatibility
HF7980 14 10 5 Glass Fiber 7.09 (180.00) Petroleum and Water Base
ST1917 14 10 5 Glass Fiber 8.94 (227.00) Petroleum and Water Base
ST1814 – 90 – Wire Mesh 7.09 (180.00) Petroleum and Water Base
1 Other seals can be ordered separately:
Part number 3312097 S – RECTANGULAR Cross Section Seal
Part number 3830114 S – SQUARE CUT Viton Seal
2 Has epoxy potting material.
3
These elements are made with 100 mesh screen (140 micron, absolute) and are not multi-pass tested.
4
Replacement Filters
Mounting/Dimensions
Service
Clearance
1.30 (33.02)
1-1/2" BSP (2X)
1.65
(42.00)
5.28
(134.0)
2.36
(60.0)
11.18 (284.0)
5.91 (150.0)
5.0 (127.0)
M10
All dimensions are
See
Replacement
Filters Chart
for Element
Length
1-1/4" BSP Thread (2X)
Hydraulic Filters Dual Spin-On Assembly

Dual Spin-On Assembly Hydraulic Filters
Performance
HF6359
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
HF6177 and HF35082
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
0 80 160 240 32040 120 200 280 400360
0 40 60 80 10020
0 80 160 240 32040 120 200 280 400360
0 40 60 80 10020
0 80 160 240 32040 120 200 280 400360
0 40 60 80 10020
20
0
40
80
60
20
0
40
80
60
HF7835 and ST1917
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
20
0
40
80
60
Legend
Assembly with 1-1/2" (38 mm) BSP Ports
Element
0 80 160 240 32040 120 200 280 400360
0 40 60 80 10020
HF7980
Flow Rate (gal/min)
Flow Rate (L/min)
0
3
6
12
9
PressureDrop(PSID)
PressureDrop(kPa)
20
0
40
80
60

Fleetguard Filter ประเทศไทย

More Related Content

What's hot (20)

Similar to Fleetguard Filter ประเทศไทย (20)

More from DNTMb Inc. (20)

Recently uploaded (20)

Fleetguard Filter ประเทศไทย