Fluke Electrical Measurement Testing Tools in ROnexbd
0 likes160 views
The document is the 2012-2013 Fluke test tools catalog, detailing a comprehensive range of digital multimeters, thermal imagers, installation testers, and various electrical testing equipment. It includes product specifications, selection guides, new product launches, and information on the Fluke after-sales service. Additionally, it offers subscription details for Fluke's electronic newsletter, which provides updates on new products and promotions.
![45
1650 Series Multifunction
Installation Testers
Slim probe design
Thanks to its slim probe with integral test button,
you can safely make one-handed measurements
on hard to reach points, while keeping your eyes
on the panel. This remote probe is powered by
the tester so always operable (does not require
additional batteries!).
Complete kit
All 1650 models are equipped with detachable
leads that can be replaced in case of damage
or loss. A durable hard case will protect your
instrument in tough field conditions.
Zero Adaptersign
For easy, always reliable and accurate
compensation for test leads and mains cords.
This adapter can be used for all different kind
of mains plugs as well as test accessories like
probes, alligator clips etc.
Extra functionality, faster testing,
and as rugged as ever
Specifications
(Check the Fluke web for detailed specifications)
AC Voltage Measurement
Range Resolution Accuracy
50 Hz - 60 Hz
Input Impedance Overload Protection
500 V 0.1 V ± (0.8% + 3 digits) 3.3 M 660 Vrms
RCD Testing
RCD Type [6]
Model 1652C Model 1653B Model 1654B
AC [1]
G [2]
• • •
AC S [3]
• • •
A [4]
G • • •
A S • • •
B [5]
G •
B S •
Notes
[1] AC - Responds to ac
[2] G - General, no delay
[3] S - Time delay
[4] A - Responds to pulsed signal
[5] B - Responds to smooth dc
[6] RCD test inhibited for V >265 ac
RCD tests permitted only if the selected current,
multiplied by earthing resistance, is <50 V.
PFC. PSC Test
Range 1000A / 10kA(50kA)
Resolution and Units 1A / 0.1kA
Accuracy Determined by accuracy of loop resistance and mains
voltage measurements
Computation
Prospective Earth Fault Current (PEFC) or Prospective Short Circuit Current (PSC) determined by dividing
measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
Tripping Time Test ( T)
Current Settings Multiplier Test Current Accuracy Trip Time Accuracy
10, 30, 100, 300, 500, 1000 mA, VAR x 1/2 + 0% - 10% ± (1% Reading + 1 digit)
10, 30, 100 mA X 5 + 10% - 0% ± (1% Reading + 1 digit)
Loop Impedance Measurement
Range Resolution Accuracy [1]
10 0.001 Hi Current m mode: ± (2 % + 15 digits)
20 0.01
No Trip mode: ± ( 3 % + 6 digits)
Hi Current mode: ± (2 % + 4 digits)
200 0.1
No Trip mode: ± (3 %)
Hi Current mode: ± (2 %)
2000 1 ±6 % [2]
Notes
[1] Valid for resistance of neutral circuit <20 and up to a system phase angle of 30°. Test leads must be zeroed before testing.
[2] Valid for mains voltage >200 V.
Earth Resistance Test (RE) – Fluke 1654B and 1653B only
Range Resolution Accuracy
200 0.1 ± (2% + 5 digits)
2000 1 ± (3.5% + 10 digits)
Continuity Testing
Ratnge
(autoranging)
Resolution Test Current Open Circuit Voltage Accuracy
20 00.1
> 200 mA > 4 V ± (1.5%+3 digits)200 0.1
2000 1
Tripping Current (Ramp) Test
Current Range Step Size Dwell Time Measurement
AccuracyType G Type S
30 % to 110 % of
RCD rated current [1] 10 % of I N [2]
300 ms/step 0 ms/step ±5 %
Notes
[1] 30 % to 150 % for Type A N >10 mA
30 % to 210 % for Type A N =10 mA
20 % to 210 % for Type B
Specified trip current ranges (EN 61008-1):
50 % to 100 % for Type AC
35 % to 140 % for Type A ( >10 mA)
35 % to 200 % for Type A ( 10 mA)
50 % to 200 % for Type B
[2] 5% for Type B
Insulation Resistance Measurement
Model Test Voltage Insulation
Resistance Range
Resolution Test Current Accuracy
1653B / 1654B 50 V 10 k to 50 M 0.01 M 1 mA @ 50 k ± (3%+ 3 digits)
1653B / 1654B 100 V 20 k to 100 M 0.01 M
0.1 M
1 mA @ 100 k ± (3%+ 3 digits)
1653B / 1654B
1653B / 1654B
250 V 20 k to 200 M 0.01 M
0.1 M
1 mA @ 250 k ± (1.5%+ 3 digits)
1653B / 1654B
1652C
1653B / 1654B
500 V 20 M
200 M
500 M
0.01 M
0.1 M
1 M
1 mA @ 500 k ± (1.5%+ 3 digits)
+ 10%
1653B / 1654B
1652C
1000 V 20 M
200 M
1000 M
0.1 M
1 M
1 mA @ 1 M ± (1.5%+ 3 digits)
+ 10%
Battery type: Alkaline supplied. usable
with 1.2 V NiCD or NiMH rechargeable
batteries
Size (HxWxD): 100 mm x 250 mm x 125 mm
Weight: 1.3 kg
Three Year Warranty](https://image.slidesharecdn.com/fluke2-190925093537/85/Fluke-Electrical-Measurement-Testing-Tools-in-ROnexbd-47-320.jpg)
![55
50 Series II Thermometers
FVF-SC 2
See page 132
TPAK
See page 132
Recommended Accessories
Fluke 54 II B
Fluke 51 II
Features
80PK-25
See page 128
Battery life: 1000 hours typical, AA
Size (HxWxD): 173 x 86 x 38 mm
Weight: 0.4 kg
Three Year Warranty
Included Accessories
Impact absorbing holster
Two bead probe thermocouples 80PK-1 (54+52)
One bead probe thermocouple 80PK-1 (51+53)
Ordering Information
Fluke 51 II Thermometer
Fluke 52 II Thermometer
Fluke 53 II B Thermometer
Fluke 54 II B Thermometer
FVF-SC2 FlukeView Forms Software
including USB interface cable
The Fluke 50 Series II contact
thermometers offer fast response and
laboratory accuracy (0.05% + 0.3°C) in
a rugged handheld test tool.
• Large backlit dual display shows any
combination of T1
, T2
(52 and 54 only),
T1
-T2
(52 and 54 only) plus MIN, MAX,
or AVG
• Relative time clock on MIN, MAX, and
AVG provides a time reference for major
events
• Electronic Offset function allows
compensation of thermocouple errors
to maximize overall accuracy
• Readout in °C, °F, or Kelvin (K)
• Sleep mode increases battery life
• Battery door allows easy battery
replacement without breaking the
calibration seal
Additional features for the 53 and
54 Series II:
• Data Logging up to 500 points of data
with user adjustable recording interval
• Real time clock captures the exact time
of day when events occur
• Recall function allows logged data to be
easily reviewed on the meter display
• IR communication port allows data to
be exported to optional FlukeView®
PC software
51 II 52 II 53 II B 54 II B
Thermocouple types J,K,T,E J,K,T,E J,K,T,E,N,R,S J,K,T,E,N,R,S
Number of inputs Single Dual Single Dual
Time stamp Relative Time Relative Time Time of Day Time of Day
Splash/Dust resistant
Dual display with backlight
Min/Max/Avg recording
(T1
-T2
) True differential
Data logging up to 500 points
IR data port for interface
to PC
Compatible with optional
FlukeView Software
80PK-26
See page 128
Fluke 52 II Fluke 53 II B
Specifications
C25
See page 130
**Only the Fluke Models 53 and 54 Series II thermometers are capable of measuring N, R, and S-type
Temperature range:
J-type Thermocouples -210°C to 1200°C
K-type Thermocouples -200°C to 1372°C
T-type Thermocouples -250°C to 400°C
E-type Thermocouples -150°C to 1000°C
N-type** Thermocouples -200°C to 1300°C
R** and S-type** Thermocouples 0°C to 1767°C
Temperature accuracy
Above –100°C (-148°F):
J, K, T, E, and N-type** ± [ 0.05% + 0.3°C ]
R** and S-type** ± [ 0.05% + 0.4°C ]
Below –100°C (-148°F):
J, K, E, and N-types ± [ 0.20% + 0.3°C ]
T-type ± [ 0.50% + 0.3°C ]
Laboratory accuracy. Wherever you go.](https://image.slidesharecdn.com/fluke2-190925093537/85/Fluke-Electrical-Measurement-Testing-Tools-in-ROnexbd-57-320.jpg)
Fluke Electrical Measurement Testing Tools in ROnexbd
- 1. 2012 2013 Test Tools Catalog Digital Multimeters Clamp Meters Electrical Testers Insulation Testers Earth Ground Testers Installation Testers Portable Appliance Testers Digital Thermometers Thermal Imagers Distance Meters Indoor Air Quality Tools ScopeMeter® Test Tools Power Quality Tools Field Calibrators Vibration Tester Radiation Tester EX Test Tools Accessories
- 2. Fluke web and electronic newsletter....................................................1 New from Fluke........................................................................................2-3 Fluke Combo Kits.....................................................................................4-5 Application/background articles ......................................................6 Fluke After Sales Service..................................................................7 Fluke where safety is built in ..........................................................8-9 Fluke web/campaign.........................................................................10 Digital Multimeters............................................................................11 DMM Selection Guide .......................................................................12 280 Series Digital Multimeters .......................................................13 233 Remote Display Multimeter......................................................14 80 Series V Digital Multimeters.......................................................15 170 Series Digital Multimeters ........................................................16 110 Series II Digital Multimeters.....................................................17 27 II / 28 II Rugged Industrial Multimeters....................................18 77 IV Digital Multimeter...................................................................19 88V Automotive Meter......................................................................20 8845A/8846A 6.5 Digit Precision Multimeters ...............................21 8808A 5.5 Digit Multimeter..............................................................22 Thermal Imagers ...............................................................................58 Ti Series Thermal Imagers...............................................................59 Ti32/Ti29/Ti27 Industrial Thermal Imagers...................................60-61 TiR32/TiR29/TiR27 Industrial Thermal Imagers for Building Diagnostics...................................................................62-63 Ti125/Ti110/Ti100 Industrial / Commercial Thermal Imagers ....64-65 TiR125/TiR110/Ti100 Building Diagnostic Thermal Imagers .......66-67 Ti9/Ti10/Ti25 Thermal Imagers .......................................................68-69 TiS/TiR/TiRx/TiR1 Thermal for Building Inspection .....................70-71 Hawk IR CRange IRWindows ...........................................................72 Digital Thermometers .......................................................................49 Infrared Thermometer Selection Guide.........................................50 570 Series Precision Infrared Thermometers................................51 60 Series Infrared Thermometers...................................................52 566/568 Multipurpose Thermometers............................................53 561 Multipurpose Thermometer.....................................................54 50 Series II Thermometers...............................................................55 1523/1524 Reference Thermometers ..............................................56 1551A/1552A Ex “Stik”Thermometers ...........................................57 Installation Testers/Portable Appliance Testers ..............................43 1650 Series Multifunction Installation Testers..............................44-45 6000 Series Portable Appliance Testers ..........................................46-47 1650/6000 Series Accessories...........................................................48 Insulation Testers/Earth Ground Testers .........................................35 Insulation Tester Selection Guide...................................................36 1577/1587 Insulation Multimeters..................................................37 1503/1507 Insulation Testers ...........................................................38 1555/1550C Insulation Resistance Testers....................................39 1620 Series Earth Ground Testers ...................................................40 1621 Earth Ground Tester.................................................................41 1630 Ground Loop Tester..................................................................42 Clamp Meters and Electrical Testers................................................23 Clamp Meter selection guide...........................................................24 381/365 Clamp Meters ......................................................................25 370 Series Clamp Meters..................................................................26 320 Series / 902 Clamp Meters.........................................................27 353/355 AC/DC Clamp Meters..........................................................28 360 Current Leakage Clamp Meter .................................................29 T100 Series Voltage/Continuity Testers..........................................30 T5/T5-H5-1AC Kit Electrical Testers................................................31 2AC/1AC-II/LVD1/LVD2 Voltage Detectors......................................32 9040/9062 Phase Rotation Indicators..............................................33 2042 Cable Locator ............................................................................34 Indoor Air Quality Tools....................................................................75 975 Air Meter......................................................................................76 922 Airflow Meter..............................................................................77 971 Temperature Humidity Meter...................................................78 983 Particle Counter..........................................................................79 Field Calibrators.................................................................................101 Field Calibrator Selection Guide......................................................102 750 Series Documenting Process Calibrators................................103 726/725/725Ex Multifunction Process Calibrators ........................104 724 Temperature Calibrator.............................................................105 712/714 Temperature Calibrators....................................................106 914X/418X Drywells/IR Calibrators.................................................107 717/718/718Ex/719 Pressure Calibrators.........................................108 705/707/707Ex/715 Loop Calibrators...............................................109 771/772/773 mA Clamp Meters........................................................110 787/789 ProcessMeters......................................................................111 Field Calibrator Accessories.............................................................112 Power Quality Tools ...........................................................................87 Power Quality Selection Guide........................................................88 345 Power Quality Clamp Meter......................................................89 43B Single-phase Power Quality Analyzer.....................................90 1710 Single-Phase Voltage Quality Recorder .................................91 430 II Series Three-phase Power Quality Analyzers .....................92-93 1735 Power Logger.............................................................................94 1740 Series Power Quality Loggers..................................................95 1750 Power Recorder.........................................................................96 1760 Power Quality Recorder...........................................................97 Power Quality Current Clamp Accessories....................................98 Norma 4000/5000 Series...................................................................99-100 ScopeMeter® Test Tools......................................................................80 ScopeMeter 190 Series II ..................................................................81-83 ScopeMeter 120 Series .....................................................................84 ScopeMeter 225C/S and general specifications ............................85 ScopeMeter Accessories...................................................................86 Fluke. Keeping your world up and running Contents Laser Distance Meters.......................................................................73 421D/416D/411D Laser Distance Meters ........................................74 General Accessories...........................................................................120 Electronic Test Leads, Probes & Clips .............................................121 Industrial Test Leads, Probes & Clips..............................................122-123-124 Automotive Accessories...................................................................125 Current Clamps.................................................................................126-127 Temperature Accessories.................................................................128-129 Cases and Holsters............................................................................130-131 Software and Other Accessories .....................................................132 Other Accessories..............................................................................133 Fuse and Warranty Information......................................................134 ATEX Certified Test Tools ..................................................................117 A brief look at ATEX..........................................................................118 Fluke intrinsically safe tools............................................................119 Vibration Tester..................................................................................113 810 Vibration Tester ..........................................................................114 Radation Meter...................................................................................115 481 Radation Meter...........................................................................116
- 3. 1 Fluke Web and Electronic Newsletter E-Test-it! is Fluke’s regular news publication for professional test tool users. It is electronically available 6 times per year. You will be the first to hear about: • New Fluke products • The latest actions and promotions from Fluke • How to get more out of Fluke tools • How to use Fluke tools better in your application • Exclusive offers, promotions and discounts on Fluke Merchandizing • Exclusive offers on Fluke ex-demo equipment E-Test-it! is free of charge. If at any point in time you do not want to receive E-Test-it! anymore, you can unsubscribe with a simple mouse click. E-Test-it! is small in size (on average about 12 KB) and does not fill up your mailbox or take long to download. Try it now and sign-up for your FREE e-Test-it! subscription. Go to the Fluke web site and fill in the on-line subscription form. Fluke web Electronic Newsletter Fluke web sites are available in all countries around the world and in 18 different languages. Complete information The most complete and in-depth resource for information on Fluke’s products and services including: • Product information • Solution Centers • Interactive selection guides • Virtual product demonstrations • Extended specifications • Application notes • Product manuals • Service information • Promotions • Prices • Where to buy • Distributor and sales office locations Find information fast To quickly find more information on Fluke products, use the “Search by model” box in the top left corner of our web pages. All you have to do is type in the model number. UK: www.fluke.co.uk IE: www.fluke.ie Worldwide: www.fluke.com
- 4. 2 New from Fluke For the first time, plant maintenance engineers and technicians can take a high-performance four-channel scope into the harsh world of industrial electronics. See page 81-83. The new 1654B Installation Tester builds upon the rugged reputation of the earlier 1650 Series, only it’s re-designed to meet your need for more productive test tools. See page 44 and 45. Fluke 750 series process calibrators can help you get the job done faster. It does so many different tasks, so quickly and so well, it’s the only process calibrator you need to carry. See page 103. The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. See page 25. Fluke 190 Series II Scopemeter Fluke 1654B Multifunction Installation Tester Fluke 750 series Documenting Process Calibrators Fluke 381 Remote Display True-rms AC/DC ClampMeter with iFlex Fluke proudly introduces an entry level thermal imager for quick, easy, and accurate problem identification and troubleshooting designed specifically for the building inspection professional. See page 70 and 71. The Fluke 365 is a new, innovative Fluke clamp meter, offering a thin, small jaw design that makes it easy to get around tightly packed wires. See page 25. With this new family of clamp meters, Fluke provides a range of state of-the-art capabilities to meet users’ most demanding requirements for flexibility, safety and performance. See page 26. Fluke TiS Thermal Imaging Scanner Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter Fluke 370 series Clamp Meters
- 5. 3 New from Fluke Designed for industrial and commercial environments, the Fluke P3 series of thermal imagers deliver superior image quality, versatility, and affordability without compromise. See page 60-63. The new Fluke 434, 435 and 437 Series II models help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems. See page 92-93. The new 1555 and redesigned Fluke 1550C insulation resistance testers offer digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables. See page 39. Fluke Ti27/Ti29 Thermal Imagers Fluke 430 Series II Three-Phase Power Quality and Energy Analyzers Fluke 1555/1550C Insulation Resistance Testers Fluke proudly introduces five new thermal imagers specifically designed to help you do more in less time, while being at home in the harshest of environments. A project that might normally take an hour can now be done in minutes. Our newest imagers are the lightest, most rugged, easiest-to-use professional imagers you can buy. See page 64-67. Accurate and repeatable to ± 0.05 °C over its full range, the 1551A/1552A “Stik” Thermometer is the new “gold standard” of industrial temperature calibration. See page 57. The new Fluke TL175 TwistGuard™ Test Leads are the innovative test leads with adjustable length test tips for use in different measurement environments. See page 124. Ti125/Ti110/Ti100/TiR125/TiR110 Thermal Imagers 1551A Ex and 1552A Ex “Stik” Thermometer TL175 Twistguard™ Test Leads
- 6. 4 Fluke Combo Kits Fluke 179/TPAK 179/ToolPak Combo Kit • Fluke 179 True RMS Multimeter • TPAK ToolPak Meter Hanging Kit Fluke 87V/E2 Industrial Electrician Combo Kit • Fluke 87V True RMS Multimeter • TL224 SureGrip™ Silicone Test Lead Set • TP38 Slim Reach Test Probe Set (insulated) • AC220 SureGrip™ Alligator Clip Set • TPAK Magnetic Hanger • 80BK-A Integrated DMM Temperature Probe • C35 Soft Meter Case Fluke 179/EDA2 Kit Electronics Combo Kit • Fluke 179 True RMS Multimeter • TL224 SureGrip™ Silicone Test Lead Set • TL910 Electronic Test Probe Set • AC280 SureGrip™ Hook Clip Set • TPAK Magnetic Hanger • 80BK-A Integrated DMM Temperature Probe • C35 Soft Meter Case Fluke 179/61 Kit Multimeter and Infrared Thermometer Combo Kit • Fluke 179 True RMS Multimeter • Fluke 61 Infrared Thermometer • C550 Hard Meter and Accessory Case Fluke 179/MAG2 Kit Industrial Combo Kit • Fluke 179 True RMS Multimeter • TL224 SureGrip™ Silicone Test Lead Set • AC220 SureGrip™ Alligator Clip Set • TP74 lantern tip test probe set • TPAK Magnetic Hanger • 80BK-A Integrated DMM Temperature Probe • C35 Soft Meter Case • + Maglite flashlight Fluke 117/322 Kit Electrician’s Combo Kit • Fluke 117 True RMS Multimeter • Fluke 322 Clamp Meter • Silicon test lead set • TPAK Magnetic Hanger • C115 Deluxe carrying case with shoulder strap Fluke 87V/i410 Combo Kit for Industrial Applications • 87V Industrial Multimeter • TL75 Test Leads • AC172 Alligator Clips • i410 400A AC/DC Current Clamp • 80BK-A Temperature Probe • C115 Soft Carrying Case (Not available in all countries) Buy a Combo Kit and save Ordering Information Fluke 117/322 Kit Fluke 179/TPAK Fluke 179/61 Kit Fluke 179/MAG2 Kit Fluke 179/EDA2 Kit Fluke 87V/E2 Fluke 87V/i410
- 7. 5 Fluke Combo Kits Fluke T5-600/62/IAC-E Kit • Fluke T5-600 Electrical Tester • Fluke 62 Mini IR Thermometer • Fluke 1AC-II Volt Alert • C115 Soft Meter Case Fluke T5-H5-1AC Kit • Fluke T5-1000 Electrical Tester • H5 Holster • 1AC-II Volt Alert Fluke 1587/ET Advanced Electrical Troubleshooting Kit • Fluke 1587 Insulation Multimeter • Fluke 62 Mini Infrared Thermometer • I400 Current Clamp Fluke 1587/MDT Advanced Motor & Drive Troubleshooting Kit • Fluke 1587 Insulation Multimeter • Fluke 9040 Phase Rotation Indicator • I400 Current Clamp Fluke 62/322/1AC Kit • Fluke 62 Mini IR Thermometer • Fluke 322 Clamp Meter • Fluke 1AC-II Volt Alert Fluke 411D/62 Kit • Fluke 411D Laser Distance Meter • Fluke 62 Mini IR Thermometer • Soft case for each model Fluke 289/FVF Industrial Logging Multimeter and Software Combo Kit • Fluke 289 True-RMS Multimeter • FVF-SC2 FlukeView Forms Software and cable • Silicon Test Lead Set • AC172 Alligator Clips • 80BK-A Integrated DMM Temperature Probe • TPAK Magnetic Meter Hanger for hands-free operation • C280 Soft Case for meter protection and accessory storage Buy a Combo Kit and save Ordering Information Fluke 287/FVF Fluke 289/FVF Fluke 1587/ET Fluke 1587/MDT Fluke T5-H5-1AC Kit Fluke T5-600/62/IAC-E Kit Fluke 62/322/1AC Kit Fluke 411D/62 Kit Fluke 287/FVF FlukeView Forms Combo Kit • Fluke 287 True RMS Electronic Logging Multimeter with TrendCapture • FVF-SC2 FlukeView Forms Software and cable • 80BK-A Thermocouple Probe • CAT III 1000 V 10 A Modular Test Leads (red, black) • CAT II 300 V 5 A Alligator Clips (red, black) • C280 Soft Case for meter protection and accessory storage Fluke 1587/MDT
- 8. 6 Application/ background articles As part of our commitment to supporting you in your work we do more than just design and manufacture rugged and versatile test tools: we also provide application notes which all can be downloaded from our web site. Furthermore check out our “total solutions” campaigns on the website. In addition to inspection tips and helpful application information, these campaigns also offer advice on picking the right tool for the job.
- 9. 7 So why should you use Fluke service? • Original manufacturers’ parts used • All instruments reviewed for latest updates • Repair warranty that covers whole unit • In depth product knowledge • Accredited calibrations available • Traceable calibrations available on all products • Full check of unit during verification cycle • Full safety test on mains powered units What other instruments can we help you with? We also offer a range of calibrations and repairs on other manufacturer’s equipment upon request. Manufacturers such as: • Tektronix • Agilent • Bruel & Kjaer • Philips • Megger • Seaward • Kewtech • Lecroy • Hioki • Yokogawa • Druck • Iwatzu • plus many more ... Did you know that the Fluke after sales service team can offer you much more than just repairing and calibrating your instrument when it is needed? Across our whole Fluke European service organization we have a vast range of capabilities, which can be utilized via your local service centre. Behind the scenes Fluke draws on the expertise of over 150 service staff that are focused on offering only the best and most comprehensive after sales service. What other value added services do we offer? • Gold Support for Fluke Networks • Gold CarePlans for calibration products • A full range of maintenance contracts • Extended warranty programs • Instrument upgrades • Option retrofits • Asset management • Calibration reminders What services do we offer you? • 5 day repairs on all current products • 5 days or less on all calibrations (excl. repairs) • 3 days for all Gold CarePlan calibrations • 1-2 days on all Networks Gold calibration • Pick up services where available Let Fluke After Sales Service help you further Eindhoven Norwich Cologne Telephone +31 (0)40 267 5300 +44 (0)1603 256620 +49 (0)69 2222 20210 Telefax +31 (0)40 267 5321 +44 (0)1603 256688 +49 (0)69 2222 20211 Email servicedesk@fluke.nl ukservicedesk@fluke.com servicedeskgermany@fluke.com Address Science Park 5108 Eindhoven 5692 EC Son Netherlands 52 Hurricane Way Norwich Norfolk NR6 6JB United Kingdom Heinrich-Pesch-Str. 9-11 50739 Köln Germany Contact Information Fluke Brands Instrument Types Fluke Digital Multimeters Hart Scientific Electrical Standards Fluke Networks Biomedical Equipment Fluke Biomedical Data Loggers Raytek Thermal Imagers Reliable Power Meters Thermometers Robin Pressure LEM Instruments Function Generators BEHA Oscilloscopes Norma Installation Testers Wavetek/Datron PAT Testers Metron Clamp Meters DHI Power Analyzers Comark EX meters Plus many more Fluke service centres handle a wide range of equipment. As part of Fluke’s continuing focus on improving our service to our customer we now offer a comprehensive range of repairs and calibrations on a vast range of equipment. Fluke manufactures equipments such as: On-Line booking in system Why not use our On-Line booking in system where you can book your unit in, get pricing and receive a RMA number for a smooth return. www.fluke.com/servicerma
- 10. 8 Table 1 Figure 1. Understanding categories: location Overvoltage installation categories. IEC 61010-1 applies to low-voltage (< 1000V) test equipment Fluke: Where safety is built in Overvoltage category In brief Examples CAT IV Three-phase at utility connection, any outdoor conductors • Refers to the “origin of installation”; i.e., where low-voltage connection is made to utility power. • Electricity meters, primary overcurrent protection equipment. • Outside and service entrance, service drop from pole to building, run between meter and panel. • Overhead line to d etached building, underground line to well pump. CAT III Three-phase distribution, including single-phase commercial lighting • Equipment in fixed installations, such as switchgear and polyphase motors. • Bus and feeder in industrial plants. • Feeders and short branch circuits, distribution panel devices. • Lighting systems in larger buildings. • Appliance outlets with short connections to service entrance. CAT II Single-phase receptable connected loads • Appliance, portable tools, and other household and similar loads. • Outlet and long branch circuits. • Outlets at more than 10 meters (30 feet) from CAT III source. • Outlets at more than 20 meters (60 feet) from CAT IV source. CAT I Electronic • Protected electronic equipment. • Equipment connected to (source) circuits in which measures are taken to limit transient overvoltages to an appropriately low level. • Any high-voltage, low-energy source derived from a high-winding resistance transformer, such as the high-voltage section of a copier. As distribution systems and loads become more complex, the possibilities of transient overvoltages increase. Motors, capacitors and power conversion equipment such as variable speed drives can be prime generators of spikes. Lightning strikes on outdoor transmission lines also cause extremely hazardous high-energy transients. If you’re taking measurements on electrical systems, these transients are “invisible” and largely unavoidable hazards. They occur regularly on low-voltage power circuits, and can reach peak values in the many thousands of volts. To protect you against transients, safety must be built into the test equipment. Who Develops Safety Standards? The IEC (International Electrotechnical Commission) develops international general standards for safety of electrical equipment for measurement, control and laboratory use. IEC61010-1 is used as the basis for the following national standards: • US ANSI/ISA-S82.01-94 • Canada CAN C22.2 No.1010.1-92 • Europe EN61010-1:2001 Overvoltage Installation Categories IEC61010-1 specifies categories of overvoltage based on the distance the piece of equipment is from the power source (see Fig. 1 and Table 1) and the natural damping of transient energy that occurs in an electrical distribution system. Higher categories are closer to the power source and require more protection. Within each installation category there are voltage classifications. It is the combination of installation category and voltage classification which determines the maximum transient withstand capability of the instrument. IEC 61010 test procedures take into account three main criteria: steady-state voltage, peak impulse transient voltage and source impedance. These three criteria together will tell you a multimeter’s true voltage withstand value. Within a category, a higher working voltage” (steadystate voltage) is associated with a higher transient, as would be expected. For example, a CAT III 600 V meter is tested with 6000 V transients while a CAT III 1000 V meter is tested with 8000 V transients. So far, so good. What is not as obvious is the difference between the 6000 V transient for CAT III 600 V and the 6000 V transient for CAT II 1000 V. They are not the same. This is where the source impedance comes in. Ohm’s Law (Amps = Volts/Ohms) tells us that the 2 Ω test source for CAT III has six times the current of the 12 Ω test source for CAT II. The CAT III 600 V meter clearly offers superior transient protection compared to the CAT II 1000 V meter, even though its so-called “voltage rating” could be perceived as being lower. See Table 2. Independent testing is the key to safety compliance How can you tell if you’re getting a genuine CAT III or CAT II meter? Unfortunately it’s not always that easy. It is possible for a manufacturer to self-certify that its meter is CAT II or CAT III without any independent verification. The IEC (International Electrotechnical Commission) develops and proposes standards, but it is not responsible for enforcing the standards. Look for the symbol and listing number of an independent testing lab such as UL, CSA, VDE, TÜV or other recognized approval agency. These symbols can only be used if the product successfully completed testing to the agency’s standard, which is based on national and international standards. UL 3111, for example, is based on EN61010-1. In an imperfect world, this is the closest you can come to ensuring that the meter you choose was actually tested for safety.
- 11. 9 Select the right test tool: • Choose a test tool rated to the highest category and voltage for which it could possibly be used (most often 600 or 1000 volt CAT III and/or 600 volt CAT IV). • Look for the category and voltage marking near the recessed input connectors of your test tool and a “double insulated” symbol on the back. • Verify your test tool has been tested and certified by two or more independent testing laboratories, such as UL in the United States and VDE or TüV in Europe by looking for the symbols of these agencies on (the back of) your test tool. • Make sure that the test tool is made of a high-quality, durable non-conductive material. • Check the manual to verify that the ohms, continuity and capacitance circuits are protected to the same level as the voltage test circuit, to reduce hazards when the test tool is used incorrectly in ohms, continuity or capacitance mode (if applicable). • Verify that the test tool has internal protection to prevent instrument damage when voltage is incorrectly applied to an amperage measurement function (if applicable). • Make sure that the amperage and voltage of your test tool’s fuses meets specifications. Fuse voltage must be as high or higher than the test tool’s voltage rating. • Be sure to use test leads that have: - Shrouded connectors - Finger guards and a non-slip surface - Category ratings that equal or exceed those of the test tool - Double insulation (look for the symbol) - A minimum of exposed metal on the probe tips Safety is everyone’s responsibility but ultimately it is in your hands. No tool by itself can guarantee your safety when working with electricity. It’s the combination of the right tools and safe work practices that gives you maximum protection. Here are a few tips to help you in your work: Make sure you always comply with (local) regulations. Work on de-energized circuits whenever possible. Use proper lock-out/tag-out procedures. If these procedures are not in place or enforced, assume that the circuit is live. Use protective gear when working on live circuits: • Use insulated tools • Wear safety glasses or a face shield • Wear insulated gloves, remove watches or jewelry • Stand on an insulated mat • Wear flame resistant clothing, not ordinary work clothes Inspect and test your test tool: • Check for a broken case, worn test leads or a faded display. • Make sure the batteries still deliver sufficient power to get reliable readings. Many test tools have a low battery indicator on the display. • Check the test leads resistance for internal breaks while moving the leads around (good leads measure 0.1-0.3 Ohm). • Use the meter’s own test capability to ensure that the fuses are in place and working right (see manual for details). Apply the appropriate working practices when measuring on live circuits: • Hook on the ground clip first, then make contact with the hot lead. Remove the hot lead first, the ground lead last. • Use the three-point test method, especially when checking to see if a circuit is dead. First test a known live circuit. Second, test the target circuit. Third, test the live circuit again. This verifies that your test tool worked properly before and after the measurement. • Hang or rest the test tool if possible. Try to avoid holding it in your hands, to minimize personal exposure to the effects of transients. • Use the old electrician’s trick of keeping one hand in your pocket. This lessens the change of a closed circuit across your chest and through your heart. Fluke: Where safety is built in Overvoltage Installation Category Working Voltage (DC or AC RMS to ground) Peak Impulse Transient (20 repetitions) Test Source (Ω = V/A) CAT I 600 V 2500 V 30 Ohm source CAT I 1000 V 4000 V 30 Ohm source CAT II 600 V 4000 V 12 Ohm source CAT II 1000 V 6000 V 12 Ohm source CAT III 600 V 6000 V 2 Ohm source CAT III 1000 V 8000 V 2 Ohm source CAT IV 600 V 8000 V 2 Ohm source Table 2 Use meters with these markings: 1000 V CAT III or 600 V CAT IV Transient test values for overvoltage installation categories. (50 V/150 V/300 V values not included) Use protective equipment such as safety glasses and insulated gloves
- 12. 10 Fluke Solution Fluke total solutions campaigns Fluke has launched a total solutions campaign focused on all our products and the benefits for you. Discover how Fluke tools can help you make or save money. You can find a wide range of useful background information, www.flukesolution.co.uk Plant Maintenance Focus on motors and drives, energy saving and process trouble shooting, where Fluke’s Test & Measurement tools can help you make the difference. Learn more about our latest developments in for example inspecting motors and drives. Thermography Focus on the user experience of our Thermal Imagers and experience the wide-ranging benefits of thermal imaging in everyday on- the-job situations. See what Fluke Thermography has to offer to make your work easier. Energy Focus on energy saving benefits in the industrial maintenance market. Fluke Test & Measurement tools help you to detect problems and/or monitoring situations –prevention- before they become critical. Learn how we can help you make or save money in your plant or industry. www.flukesolution.co.uk Visit the full portal to get all your troubleshooting solutions from one source. Every Fluke tool is built around one idea…You!
- 13. 11 Safety, quality and performance: three words that sum up the benefits of our extensive range of digital multimeters. Designed to help you do your job faster, more efficiently and with greater accuracy, there is a model for every budget and application. Choose from handheld troubleshooters to ultra smart instruments packed with features, including the ability to log and graph data, as well as high-precision bench units. Digital Multimeters
- 15. 13 Included Accessories TL175 test leads, AC172 alligator clips, probe holder, 6 AA batteries (installed), user manual, Calibration Certificate Sheet. Ordering Information Fluke 287 True-RMS Electronic logging multimeter with TrendCapture Fluke 289 True-RMS Industrial logging multimeter with TrendCapture Fluke 289/FVF Industrial logging multimeter and Software Combo Kit (see page 5) Fluke 287/FVF FlukeView Forms Combo Kit (see page 5) FVF-SC2 FlukeView Forms software including IR/USB cable 287 289 True-RMS measurements AC, AC+DC AC, AC+DC Bandwidth (voltage/current) 100 kHz / 100 kHz 100 kHz / 100 kHz Digital display counts (default/selectable) 50.000 / 50.000 50.000 / 50.000 Logging function with TrendCapture Records events and trends Internal memory Up to 180 h Up to 180 h Saves measurements Optical USB PC communications interface Low input impedance function (LoZ) Motor winding and low ohm measurement range 50 Ω Low pass filter Field upgradeable/expandable meter Navigation keys F1-F4 soft keys/user function menus I-info button/on board help screens Multilingual interface Saves preferred measurement setups Current measurement: 20 A (30 seconds momentary; 10 A continuous) Peak capture (records transients as fast as 250 μs) Continuity measurement Min/Max/Average with Time Stamp (records signal fluctuations) IP Rating 54 Functions Maximum Max. resolution 287 and 289** Voltage DC 1000 V 1 μV ±(0.025% + 5) Voltage AC 1000 V 1 μV ±(0.4% + 40) Current DC 10 A 0.01 μA ±(0.15% +2) Current AC 10 A 0.01 μA ±(0.7% + 5) Temperature -200 ºC to 1350 ºC 0.1 ºC ±(1.0% + 1 ºC) Resistance 500 MΩ 0.01 Ω ±(0.05% + 2) Conductance 50 nS 0.01 nS ±(1.0% + 10) Capacitance 100 mF 0.001 nF ±(1.0% + 5) Frequency 1 MHz 0.01 Hz ±(0.005% + 1) 280 Series Digital Multimeters True RMS Precise performance View logged data graphically on screen Accuracies are best accuracies for each function. ** 287 and 289 accuracy and resolution are stated for 50.000 counts Advanced diagnostic and logging functionality for maximizing productivity Replacing the popular 180 Series, the Fluke 289 and Fluke 287 represent the next generation of high-performance industrial logging multimeters, including higher accuracy and greater troubleshooting convenience than ever before. With the ability to log data and review it graphically on the large display, you can solve problems faster and help minimize downtime, while working at several locations. • Large 50,000 count 320 x 240 (1/4 VGA) dot matrix display • Logging function with TrendCapture for easy review of logged data • Multiple readings per display provide more information at a glance • “I”-info button for convenient on-board help • PC interface for easy data transfer In addition, the Fluke 289 provides: • Lo Pass filter for motor drive measurements • LoZ – Low impedance function prevents false “ghost voltage” readings • 50 Ω range for motor winding and low ohm measurements Features Specifications (Check the Fluke web for detailed specifications) Recommended Accessories TLK289 See page 123 TL910 See page 121 TLK287 See page 121 TPAK See page 132 C280 See page 130 Fluke 287 Battery life: 50 hours minimum, 180 hours in logging mode Size (HxWxD): 222 mm x 102 mm x 60 mm Weight: 0,871 kg Lifetime warranty Fluke 289
- 16. 14 233 Removable magnetic display True-RMS measurement Digital display counts 6000 Display backlight Built in thermometer Resistance, continuity and diode test Min/Max and average recording Auto power off maximizes battery life Radio transmitter automatically turns off when the display is connected to the meter Use as conventional multimeter when the display is connected Safety rating CAT IV 600 V / CAT III 1000 V Auto and manual ranging Display Hold and AutoHOLD® Unsafe voltage alert warns for voltages above 30V 2 Low batteries indication Ergonomic case with integrated holster Selectable sleep mode preserves battery life 233 Remote Display Multimeter Included Accessories Test leads with 4mm lantern tips, AC 172 alligator clips, 80BK-A temperature probe, CD-ROM, AA batteries and user manual. Ordering Information Fluke 233 Remote Display Multimeter The Fluke 233 remote display digital multimeter allows you to be in two places at once. The removable display solves the problems of holding both the meter and the test leads to make a measurement, making measurements in hard-to-reach places, and making measurements in machines or panels that are physically separated from a limit switch or an isolator switch. Wireless technology allows the display to be carried up to 10 meters away from the point of measurement. The Fluke 233 is also designed to work in areas where the operator can’t be close to the active measurement point, like clean rooms or hazardous areas. Recommended Accessories 80AK-A See page 128 80PK-9 See page 128 i410 See page 127 Tpak See page 132 C35 See page 130 Battery Life: AA alkaline (3 for main body, 2 for display), 400 hrs typical Size (HxWxD): 193 x 93 x 53 mm On all inputs Features Specifications Functions Fluke 233 Maximum Max. Resolution Accuracy Voltage DC 1000 V 0.1 mV ±(0.25% + 2) Voltage AC 1000 V 0.1 mV ±(1.0% + 3) Current DC 10 A 1 mA ±(1.0% + 3) Current AC 10 A 1 mA ±(1.5% + 3) Resistance 40 MΩ 0.1 Ω ±(0,9% + 1) Capacitance 9999 μF 1 nF ±(1,9% + 2) Frequency 50.00 kHz 0.01 Hz ±(0,1% + 2) Temperature -40 ºC to +400 ºC 0,1 ºC ±(1% + 10) Wireless frequency: 2.4 GHz ISM Band 10 meter range Weight: 0.6 kg Three year warranty Ultimate flexibility with removable display Accuracies are best accuracies for each function Fluke 233 True RMS
- 17. 15 True RMS 80 Series V Digital Multimeters Included Accessories TL175 test leads, AC172 alligator clips, yellow holster (H80M excl. TPAK), 80BK temperature probe (87V only), 9 V battery (installed), CD-ROM (user’s manual and technical notes) and operator’s guide. Ordering Information Fluke 83V Multimeter Fluke 87V True RMS Multimeter Fluke 87V Ex Intrinsically safe True RMS multimeter Fluke 87V/E2 Industrial Electrician Combo Kit See page 4 The Fluke 80 Series V have improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electro-mechanical equipment. The Fluke 87V has a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. A built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. For 87V Ex see also page 118 and 119. Specifications (Check the Fluke web for detailed specifications) C25 See page 130 TL238 See page 122 i410/i1010 See page 127 TPAK See page 132 L215 See page 123 Features Accuracies are best accuracies for each function. * 87V accuracy is stated for 6000 counts and resolution for 20000 counts ** 20 A up to 30 seconds On all inputs not 87V Ex Fluke 87V Fluke 83V Fluke 87V Ex 83V/87V Battery Life: Over 400 hours typical (alkaline). Size (HxWxD): 200 mm x 95 mm x 48 mm Weight: 0.6 kg 83V/87V: Lifetime Warranty 87V Ex: One Year Warranty 83V 87V / 87V Ex True-RMS voltage and current for accurate measurements on non linear signals Bandwidth (voltage/current) 5 kHz 20 kHz Digital display counts (default/selectable) 6000 20000 / 6000 Selectable filter for accurate voltage and frequency measurements on motor drives Large display with analog bargraph and 2 level bright white backlight Auto and manual ranging for maximum flexibility Built-in thermometer lets you carry one less tool Peak capture to record transients as fast as 250 μs Relative mode to remove test lead resistance from low ohms measurements Min-Max-Average recording with Min/Max Alert to capture variations automatically AutoHOLD® to capture stable readings avoiding noisy signals Audible continuity, diode test and duty cycle Input Alert “Classic” design with new removable holster with built in test lead and probe storage Improved selectable sleep mode for long battery life Easy battery exchange without opening the complete case ATEX safety rating II 2 G Eex ia IIC T4 87V Ex Functions Maximum Range 83V 87V/87V Ex* Max. resolution Accuracy Max. resolution Accuracy Voltage DC 1000 V 0.1 mV ±(0.1%+1) 10 μV ±(0.05%+1) Voltage AC 1000 V 0.1 mV ±(0.5%+2) 10 μV ±(0.7%+2) Current DC 10 A ** 0.1 μA ±(0.4%+2) 0.01 μA ±(0.2%+2) Current AC 10 A ** 0.1 μA ±(1.2%+2) 0.01 μA ±(1.0%+2) Resistance 50 MΩ 0.1 Ω ±(0.4%+1) 0.01 Ω ±(0.2%+1) Conductance 60 nS 0.01 nS ±(1.0%+10) 0.001 nS ±(1.0%+10) Capacitance 9999 μF 0.01 nF ±(1.0%+2) 0.01 nF ±(1.0%+2) Frequency > 200 kHz 0.01 Hz ±(0.005%+1) 0.01 Hz ±(0.005%+1) Temperature -200 to 1090 ºC - 0.1 ºC 1.0% 80BK temperature probe -40 to 260 ºC - - 2.2 ºC or 2% Performance and accuracy for maximum industrial productivity Recommended Accessories (Not for hazardous zones)
- 18. 16 170 Series Digital Multimeters Included Accessories Test leads with 4 mm lantern tips, installed 9V battery and users manual. The 179 also includes the 80BK temperature probe. Ordering Information Fluke 175 True RMS Multimeter Fluke 177 True RMS Multimeter Fluke 179 True RMS Multimeter Fluke 179/EDA2 Kit Electronics Combo Kit Fluke 179/MAG2 Kit Industrial Combo Kit See page 4 These meters have the features needed to find most electrical, electro- mechanical and heating and ventilation problems. They are simple to use and have significant improvements over Fluke’s original 70 Series like True-RMS, more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. (Check the Fluke web for detailed specifications) Recommended Accessories i400 See page 126 C90 See page 130 TLK-220 See page 122 SV225 See page 133 i410-i1010 See page 127 Features Accuracies are best accuracies for each function Battery Life: Alkaline, 200 hrs typical Size (HxWxD): 190 mm x 85 mm x 45 mm Fluke 175 Fluke 177 On all inputs Fluke 179 True RMS Specifications 175 177 179 True-RMS measurements AC AC AC Digital display counts, updates 4 times per second 6000 6000 6000 Display backlight Analog bargraph / 33 segments, updates 40 times per second Auto and Manual ranging Display Hold and AutoHOLD® Min-Max-Average recording mode with Min/Max Alert Temperature readings (bead thermocouple probe included) Smoothing mode allows filtering of rapidly changing inputs Audible continuity and diode test Test lead alert Unsafe voltage alert warns for voltages above 30V Low battery indication Ergonomic case with integrated holster Easy battery and fuse exchange without opening the complete case Selectable sleep mode preserves battery life Weight: 0.42 kg Lifetime Warranty Functions Maximum Max. resolution 175 177 179 Voltage DC 1000 V 0.1 mV ±(0.15%+2) ±(0.09%+2) ±(0.09%+2) Voltage AC 1000 V 0.1 mV ±(1.0%+3) ±(1.0%+3) ±(1.0%+3) Current DC 10 A 0.01 mA ±(1.0%+3) ±(1.0%+3) ±(1.0%+3) Current AC 10 A 0.01 mA ±(1.5%+3) ±(1.5%+3) ±(1.5%+3) Resistance 50 MΩ 0.1 Ω ±(0.9%+1) ±(0.9%+1) ±(0.9%+1) Capacitance 10000 μF 1 nF ±(1.2%+2) ±(1.2%+2) ±(1.2%+2) Frequency 100 kHz 0.01 Hz ±(0.1%+1) ±(0.1%+1) ±(0.1%+1) Temperature -40 ºC/+400 ºC 0.1 ºC ±(1.0%+10) Versatile meters for field service or bench repair
- 19. 17 110 Series Digital Multimeters The Fluke 110 Series has five true-rms DMMs, each for specific users.The compact instruments offer convenient one-handed operation and a backlit display with large, easy- to-read digits. Fluke 117 Electrician’s Multimeter with Non-Contact Voltage The 117 is for electricians working in commercial and non-commercial premises (like hospitals and schools). It includes extras like non-contact voltage detection for faster and safer operation. Fluke 116 Multimeter with Temperature and Microamps The 116 is for heating, ventilation and air conditioning (HVAC) engineers. It includes temperature measurement and microamp current ranges to quickly troubleshoot HVAC problems. Fluke 115 Field Service Testing Multimeter An everyday multimeter for technicians, the 115 is for electrical and electronic testing in field service, industrial, and applications where more than the basic functions simplify work. Fluke 114 Electrical Multimeter The 114 is for electrical troubleshooting and straightforward ‘go/no-go’ in residential/ commercial testing. It has all the basic functions plus a special feature to prevent false readings caused by ghost voltage. Fluke 113 Multimeter The 113 is for basic electrical tests and repairing most electrical problems. Features include Fluke’s VCHEK™, added measurement functions, backlight and conformance to the latest safety standards. Recommended Accessories C50 See page 130 (Check the Fluke web for detailed specifications) TL223-1 See page 122 MC6 See page 133 TPAK See page 132 Features Accuracies are best accuracies for each function Battery type: 9 volt Alkaline, 400 hours typical Size (HxWxD): 167 mm x 84mm x 46 mm Specifications Weight: 0.55 kg (including batteries) Three Year Warranty Compact design for ergonomic one-handed operation 113 114 115 116 117 True RMS readings AC AC AC AC AC Counts 6000 6000 6000 6000 6000 Backlight Analog bargraph AutoVolt: Automatic AC/DC voltage selection VoltAlert™, Non-contact voltage detection Built-in thermometer for HVAC applications LoZ: low input impedance to prevent ghost voltage VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity Min/Max/Average to record signal fluctuations Resistance, continuity Frequency, Capacitance, Diode test -/ / Microamps to test flame sensors Display hold Auto/manual ranging Low battery indication Compact case with removable holster Functions Maximum Max. resolution 113 114 115 116 117 Voltage DC 600V 1mV ±(0.5%+2) ±(0.5%+2) ±(0.5%+2) ±(0.5%+2) ±(0.5%+2) Voltage AC 600V 1mV ±(1.0%+3) ±(1.0%+3) ±(1.0%+3) ±(1.0%+3) Current DC 10.00A 1mA ±(1.0%+3) ±(1.0%+3) Current AC 10.00A 0.01A ±(1.5%+3) ±(1.5%+3) Resistance 40MΩ (113: 60KΩ) 0.1Ω ±(0.9%+2) ±(0.9%+1) ±(0.9%+1) ±(0.9%+1) ±(0.9%+1) Capacitance 10000μF 1nF ±(1.9%+2) ±(1.9%+2) ±(1.9%+2) ±(1.9%+2) Frequency 50kHz 0.01Hz ±(0.1%+2) ±(0.1%+2) ±(0.1%+2) Temperature -40°C/+400°C 0.1°C ±(1.0%+10) VCHEK™ 600.0V AC/DC 0.1V ±(2.0%+3) Fluke 117 Fluke 115 Fluke 116 Fluke 114 True RMS On all inputs Fluke 113 Included Accessories Test leads with 4 mm lantern tips, holster, installed 9V battery and users manual Ordering Information Fluke 113 True RMS Multimeter Fluke 114 True RMS Multimeter Fluke 115 True RMS Multimeter Fluke 116 True RMS Multimeter Fluke 117 True RMS Multimeter Fluke 117/322 Kit Electricians Combo Kit (see page 4)
- 20. 18 27 II 28 II IP 67 waterproof & dustproof protection Withstands 3 meter drop (with holster) True-RMS measurements Digital display counts 6000 20000/6000 Bright, two-level backlight Backlit keypad buttons Reversible, rubber holster Built-in thermometer Resistance, continuity and diode test Min/Max and average recording Improved sleep mode for long battery life Relative mode to remove test lead resistance from low ohms measurements Auto and manual ranging Safety rating CAT III 1000 V CAT IV 600 V CAT III 1000 V CAT IV 600 V 27II / 28II Rugged IP67 Industrial Multimeters Included Accessories TL175 Test leads, AC172 alligator clips, 80BK-A temperature probe (28 II), holster, manual, CD-ROM, three AA batteries (installed) Ordering Information Fluke 27 II IP 67 Industrial Multimeter Fluke 28 II IP 67True-RMS Industrial Multimeter The Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15° C to + 55°C and 95% humidity, and a 3-meter drop. They withstand hazardous 8.000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards. Furthermore, the 28 II has a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. The new Fluke 20 series multimeters are built to work in the toughest environments. Recommended Accessories Battery Life: 3x AA alkaline, 800 hrs typical Size (HxWxD): 198 x 100 x 63.5 mm Features Specifications Functions Maximum Max. Resolution 27 II 28 II Voltage DC 1000 V 0.1 mV ±(0.1% + 1) ±(0.05% + 1) Voltage AC 1000 V 0.1 mV ±(0.5% + 3) ±(0.7% + 4) Current DC 10 A 0.1 μA ±(0.2% + 4) ±(0.2% + 4) Current AC 10A 0.1 μA ±(1.5% + 2) ±(1.0% + 2) Temperature -200°C to +1090°C 0.1°C ±(1% + 10) Resistance 50MΩ 0.1Ω ±(0.2% + 1) Low pass filter (Measurement on VSD’s) yes Capacitance 9999μF 0.01nF ±(1% + 2) Frequency 200 kHz 0.01 Hz 0.005% + 1 Peak transient capture 250 μS Weight: 0.75 kg Lifetime Warranty Designed to survive water, dust and rough handling and yet troubleshoot most electrical problems Accuracies are best accuracies for each function On all inputs Fluke 27 II Fluke 28 II True RMS PV 350 See page 125 i200 See page 126 i410 See page 127 80K-6 See page 133
- 21. 19 77IV Digital Multimeter The 77-IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke’s original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. Features Accuracies are best accuracies for each function. Battery Life: 400 hours typical Size (HxWxD): 185 mm x 90 mm x 43 mm Included Accessories Test leads with 4mm lantern tips, operator’s manual, 9V battery (installed) Ordering Information Fluke 77IV Multimeter On all inputs Function Maximum Max. resolution Accurancy Voltage DC 1000 V 1 mV ±(0.3%+1) Voltage AC 1000 V 1 mV ±(2.0%+2) Current DC 10 A 0.01 mA ±(1.5%+2) Current AC 10 A 0.01 mA ±(2.5%+2) Resistance 50 MΩ 0.1 Ω ±(0.5%+1) Capacitance 9999 μF 1 nF ±(1.2%+2) Frequency 99.99 kHz 0.01 Hz ±(0.1%+1) Specifications 77 IV Digital display counts 6000 Large display with backlight Min-Max-Average recording mode with Min/Max Alert High contrast digital display with large digits Analog bargraph/segments 31 Auto and Manual ranging Automatic Touch Hold® Audible continuity / diode test Ergonomic case with integrated holster Sleep Mode preserves battery life EN 61010-1 safety rating CAT IV 600 V / CAT III 1000 V Weight: 0.42 kg Lifetime Warranty Versatile multimeter for field service or bench repair Recommended Accessories i400 See page 126 C35 See page 130 Tpak See page 132 TL225 See page 133 TLK-225 See page 123 Fluke 77 IV
- 22. 20 88V/A Continuity for detecting open and shorts Frequency for “pulsed-DC” and AC tests Duty cycle to verify operation of feedback carburetors Diode test for alternator testing Built-in thermometer; thermocouple probe included Min/Max/Average recording with Min/Max Alert Peak capture to record transients as fast as 250 μs Relative mode to remove test lead resistance from low ohms measurements Millisecond pulse width measurements for fuel injectors AutoHOLD® to capture stable readings Large display with bright, two-level backlight Magnet hanger to attach meter to the vehicle RPM80 Inductive Pickup for both conventional and distributorless (DIS) ignitions Hard Meter Case Safety rating CAT III 1000 V, CAT IV 600 V 88V Automotive Meter Included Accessories H80M Holster with TPAK Meter Hanging Solution, TL224 SureGrip Silicone Test Lead Set, TP74 Test Probe Set, AC285 SureGrip Large Jaw Alligator Clip Set, 80BK Integrated Temperature Probe, RPM80 Inductive Pick-up Probe, C800 Hard Case, User’s Manual + Quick Reference Guide Ordering Information Fluke 88V/A Automotive Meter Combo Kit Perhaps the most important tool you’ll use in troubleshooting auto electrical systems is the multimeter. Basic multimeters measure voltage, current and resistance, while automotive multimeters like the Fluke 88V have features that can check frequency, duty cycle, make diode tests, and measure temperature, pressure and vacuum. Recommended Accessories TL82 See page 125 TLK-282-1 See page 125 90i-610s See page 125 80PK-27 (requires 80AK) See page 128 PV350 See page 125 Battery Life: 88V – Over 400 hours typical (alkaline) Size (HxWxD): 88V – 186 mm x 86 mm x 32 mm Fluke 88V/A On al inputs Features Specifications Fluke 88V Range Resolution Accuracy Voltage DC 1000V 0.1mV 0.1% Voltage AC 1000V (5 kHz) 0.1mV 0.5% Current DC 10A 0.1μA 0.4% Current AC 10A 0.1μA 1.2% Resistance 50MΩ 0.1Ω 0.4% Capacitance 10mF 0.01nF 1% Frequency 200kHz 0.01Hz 0.01% Temperature 1090ºC 0.1ºC 1% Weight: 88V – 0.36 kg Lifetime Warranty The right meter for auto-electric diagnosis
- 23. 21 8845A/8846A 6.5 Digit Precision Multimeters Included Accessories LCI Line Power Cord, Test Lead Set, Spare Line Power fuse, Programmers Manual/ User Manual on CD-ROM, 884X-USB USB to RS232 Cable Adapter, FVF-BASIC FlukeView Forms Software Basic Version. Ordering Information Fluke 8845A 6.5 Digit Precision Multimeter Fluke 8845A/SU 6.5 Digit Precision Multimeter (software + cable) Fluke 8846A 6.5 Digit Precision Multimeter Fluke 8846A/SU 6.5 Digit Precision Multimeter (software + cable) Calibration & Service agreements The Fluke 8845A and 8846A, 6.5 digit precision multimeters have the precision and versatility to handle your most demanding measurements on the bench or in a system. Dual Display offers versatile graphical capabilities: The 8845A and 8846A features a unique graphical display that can reveal signal quality issues like drift, intermittent and stability by viewing the measurement data as a real time TrendPlot™, Histogram or Statistics using the unique analyze mode. Wide Measurement Ranges: Resistance or current has been extended to cover the widest range possible. Perform 4-wire measurements easily with two leads: Patented split terminal jacks for 2x4 Ohms function allows you to perform precise 4-wire measurements with only two leads instead of four. Optional Kelvin leads accessories are available to enable you to establish a 4- wire connection even in tight spaces. Systems Capabilities: Both instruments include an RS-232, IEEE-488 and Ethernet interface as standard, with popular DMM emulation modes makes systems integration a simple task. Software: Transfer data points from your meter to your PC with the free copy of FlukeView Forms Basic. To customize your forms upgrade with FVF-UG. * Accuracy =+/- (% of reading) 884X-case Hard case TL2X4W-TWZ 2x4 Wire Ohms Tweezer Test Leads TL2X4W-PT II 2x4 Wire Ohms Test lead 2mm Probe Tip 884X-512M USB Memory 512M FVF-UG FlukeView Forms Software Upgrade Size (HxWxD): 88 mm x 215 mm x 293 mm Weight: 3.6 kg Three Year Warranty Features Specifications Fluke 8846A (Check the Fluke web for detailed specifications) Recommended Accessories Fluke 8845A 8845A 8846A Function* Range Resolution Accuracy* (%) Range Resolution Accuracy* (%) Voltage DC 1000 V 100 nV 0.0035 1000 V 100 nV 0.0024 Voltage AC (Freq 300 Hz) 750 V 100 nV 0.06 1000 V 100 nV 0.06 Resistance (2x4 Wire) 100 MΩ 100 μΩ 0.01 1 GΩ 10 μΩ 0.01 Current DC 10 A 100 pA 0.05 10 A 100 pA 0.05 Current AC (Freq. 3Hz-10kHz) 10 A 10 μA 0.10 10 A 100 pA 0.10 Freq/Period 300 kHz 1 μHz 0.01 1 MHz 1 μHz 0.01 Capacitance - - - 1 nF to 100 mF 1 pF 1 Temperature RTD - - - -200 to +600º 0.001º 0.06 True RMS 8845A 8846A Display Dual VFD Dot Matrix Resolution 6.5 Digits Measurement Rate (Rdgs/s) 1000 Continuity / Diode Test Yes Analytical Functions Statistics, Histogram, TrendPlot™, Limit Compare Math Functions NULL, Min/Max, dB/dBm USB Device Port – USB Memory Drive port Real Time Clock – Yes Interfaces RS232, IEEE-488.2, Ethernet Programming Languages/ Emulation Modes SCPI (IEEE-488.2), Agilent 34401A, Fluke 45 Safety Designed to comply with IEC 61010-12000-1, ANSI / ISA-S82.01-1994, CAN / CSA-C22.2 No.1010.1-92 1000V CATI / 600V CATII Precision and versatility for bench or systems applications Handle even the most demanding measurements with high accuracy and 6.5 digit resolution View results in Histogram mode to reveal stability or noise problems in analog circuits Use the built-in TrendPlot paperless chart recorder to graphically identify the extent of drift and intermittent events in analog circuits
- 24. 22 8808A 5.5 Digit Multimeter Included Accessories LCI Line Power Cord, Test Lead Set, Spare Line Power fuse, 884X-USB USB to RS232 Cable Adapter, FlukeView Forms Software Basic Version, Programmers Manual/User Manual on CD-ROM. Ordering Information Fluke 8808A 5.5 digit multimeter Fluke 8808A/SU 5.5 digit multimeter, (software & cable) Fluke 8808A/TL 5.5 digit multimeter, 2X4W Test Lead Kit Manufacturing test, R&D, development and service applications demand performance and flexibility from a bench meter. The Fluke 8808A delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency - all at superior accuracy and resolution with a basic V dc accuracy of 0.015 %. Measure sensitive leakage current: The Fluke 8808A includes two low impedance low current ranges for measuring sensitive leakage currents (i-Leakage). Perform routine manufacturing functional tests with consistency: Use setup keys (S1 – S6) for fast access to repetitive measurements. Operators no longer need to press multiple buttons to make routine measurements. Eliminate production mistakes: The 8808A has a limit compare mode with built in display enunciators that clearly show whether a test is within or out of limits. Perform 4-wire measurements with only two leads: Patented split terminal jacks for 2x4 Ohms function allow you to perform precise 4-wire low ohms measurements with only two leads instead of four. Optional test lead accessories are available to enable you to establish a 4-wire connection even in tight spaces or on surface mount devices. * Accuracy = +/- (% of reading) Size (HxWxD): 88 mm x 217 mm x 297 mm Weight: 2.1 kg Three year Warranty Features Specifications The Fluke 8808A includes two low impedance low current ranges for measuring sensitive leakage currents Dual Display (Check the Fluke web for detailed specifications) Recommended Accessories Fluke 8808A Functions Range Resolution Accuracy* Voltage DC 200 mV to 1000 V 1 μV 0.015 Voltage AC (Freq. 10 Hz to 100 kHz) 200 mV to 750 V 1 μV 0.2 Resistance (2x4 Wire) 200 Ω to 100 MΩ 1 mΩ 0.02 Current DC 200 μA to 10 A 1 nA 0.02 Current AC (Freq. 20 Hz to 2 kHz) 20 mA to 10A 0.1 μA 0.3 Freq. Period 20 Hz to 1 MHz (Freq. only) 0.1 mHz 0.01 True RMS 8808A Display VFD multi segment Resolution 5.5 digits Measurements V ac, V dc, I dc, I ac, Ω, Cont, Diode Advanced Measurements 2X4 Wire Ohms, Freq, i-Leakage Continuity / Diode Test Yes Analytical Functions Limit Compare Math Functions dBm, dB, Min, Max Interfaces RS-232, USB via optional adapter Programming Languages/Modes Simplified ASCI, Fluke 45 Safety Rating CAT I 1000 V, CAT II 600 V FVF-UG/SC4/SC5 FlukeView Forms Software 884X-short 4-Wire Short TL2X4W-PT II 2x4 Wire Ohms Test lead 2mm Probe Tip 884X-case Hard case TL2X4W-TWZ 2x4 Wire Ohms Tweezer Test Leads Versatile multimeter for manufacturing, development and service applications Use setup keys (S1-S6) for fast access to repetitive measurements. Setups can include limit compare mode with pass/fail indicators
- 25. 23 The ergonomic clamp meters feature wide opening jaws for safe, fast non-contact current measurement. The Fluke leakage clamp meter is ideal for non-invasive checks of insulation resistance. The range of electrical testers includes two-pole testers for taking quick measurements in tight spaces, phase rotation indicators to take the guess work out of checking phase/motor rotation, a multipurpose cable locator and handy voltage alerts. The new Fluke iFlex flexible current probes expand the measurement range of select Fluke meters to 2500 A ac and allow technicians to reach crowded spaces. Clamp Meters and Electrical Testers
- 27. 25 381 Remote Display True-rms AC/DC Clamp Meter with iFlex™ 365 Detachable Jaw True-rms AC/DC Clamp Meter Included Accessories 18-inch iFlex™ Flexible Current Probe (Fluke 381), test leads, soft carrying case, instruction card, safety information sheet, two AA alkaline batteries. Ordering Information Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex™ Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter TL175 See page 124 TL223-1 See page 122 Recommended Accessories The Fluke 381 Clamp Meter combines iFlex flexibility with remote reading capability for the ultimate in innovation and safety. • Remote display reads measurements up to 30 feet away • iFlex flexible current probe included, 18-inch circumference • 2500 A ac current measurement with iFlex • 1000 A ac and dc current measurement with fixed jaw • 1000 V ac and dc voltage measurement • Frequency measurement to 500 Hz • 60 kΩ resistance measurement • Min/Max/Avg and inrush recording • CAT IV 600 V, CAT III 1000 V • Three-year warranty See specifications chart on page 24. The Fluke 365 Clamp Meter offers a small, detachable jaw—with four feet of coil—that makes it easy to take and read measurements in tight or hard-to-reach places. • 200 A ac and dc current measurement • 600 V ac and dc voltage measurement • 6000 Ω resistance measurement • Built-in flashlight • Large, easy-to-read backlight display • Three-year warranty See specifications chart on page 24. All the bells and whistles Where rugged meets reliable New New True RMS True RMS
- 28. 26 370 Series Clamp Meters Included Accessories 18-inch iFlex™ flexible current Probe (Fluke 376), test leads, soft carrying case, instruction card, safety information sheet, two AA alkaline batteries. Ordering Information Fluke 376 True-rms AC/DC Clamp Meter with iFlex™ Fluke 375 True-rms AC/DC Clamp Meter Fluke 374 True-rms AC/DC Clamp Meter Fluke 373 True-rms AC Clamp Meter i2500-10 iFlex™ Flexible Current Probe 25 cm (10 in) i2500-18 iFlex™ Flexible Current Probe 45 cm (18 in) Our new family of true-rms clamp meters provides a range of state of-the- art features to meet even the most demanding job requirements. All four of the new clamp meters have improved base features such as a large, backlit display, true-rms standard, CAT IV safety rating and a durably constructed body. Additionally, the 376, 375 and 374 are compatible with the iFlex flexible current probe (included with the 376, sold separately for the 375 and 374), and provide increased measurement readings to 1000 A and 1000 V ac and dc. Recommended Accessories True RMS Fluke 374 Fluke 373Fluke 375 Fluke 376 (with i2500) Fluke i2500 Be ready for anything iFlex™ Flexible Current Probe Specifications New TL175 See page 124 TL223-1 See page 122 AC285 See page 124 The new Fluke iFlex flexible current probes expand the measurement range of select Fluke meters to 2500 A ac and allow technicians to reach crowded spaces. • Expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access • Compatible to Fluke 374, 375, 376 and 381 • CAT IV 600 V, CAT III 1000 V • 7.5 mm coil diameter allows measurement in tight spaces • Ergonomic design allows easy operation with one hand • 1.8 m (6 ft) cable • Three-year warranty 373 374 375 376 True-rms AC current AC voltage Resistance Continuity DC volts DC current Frequency Low pass filter Inrush current mode 18-inch iFlex Flexible Current Probe Optional Optional Included 10-inch iFlex Flexible Current Probe Optional Optional Optional Functions Range 373 374 375 376 Current AC 0 to 600.0 A 2% ± 5 counts 2% ± 5 counts 2% ± 5 counts 0 to 999.9 A 2% ± 5 counts Current DC 0 to 600.0 A 2% ± 5 counts 2% ± 5 counts 0 to 999.9 A 2% ± 5 counts Voltage AC 0 to 600.0 V 1% ± 5 counts 1.5% ± 5 counts 1.5% ± 5 counts 1.5% ± 5 counts Voltage DC 0 to 600.0 V 1% ± 5 counts 1% ± 5 counts 1% ± 5 counts 0 to 1000 V 1% ± 5 counts Resistance range 0 to 6000 Ω 0 to 6000 Ω 0 to 6000 Ω 0 to 60 kΩ Jaw opening 32 mm 34 mm 34 mm 34 mm Max. wire size 750 MCM 750 MCM 750 MCM 750 MCM Frequency measurement range 500 Hz 500 Hz Features
- 29. 27 320 Series Clamp Meters 902 True-rms HVAC Clamp Meter Included Accessories Test leads, temperature probe (Fluke 902), soft carrying case, instruction card, safety information sheet, two AA alkaline batteries. Ordering Information Fluke 321 Clamp Meter Fluke 322 Clamp Meter Fluke 902 True-rms HVAC Clamp Meter TL175 See page 124 LVD2 See page 32 TL223-1 See page 122 H3 See page 131 Recommended Accessories The Fluke 321 and 322 are designed to verify the presence of load current, ac voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable environments. • Precised measurements with 1.8 % basic accuracy • Resolution up to 0.01 A and 0.1 V • Measures ac current 40.00 A/400.0 A • Measures ac and dc volts to 600 V • Resistance measurement to 400 Ω • Continuity for quick checking of shorts See specifications chart on page 24 for details per model. HVAC (heating, ventilation, air conditioning) technicians require a service tool that can consistently keep up with their demands. The Fluke 902 expands the existing line of quality Fluke clamp meters by delivering the features necessary to diagnose and repair HVAC systems. Combined with true-rms technology and a CAT III 600 V rating, the Fluke 902 helps technicians do their jobs safely and accurately. • Designed for HVAC applications with capacitance, dc current (μA), and temperature measurements • Small body and jaws fit perfectly in your hand and into tight places • Handy “Display Hold” button keeps measurements on the display • Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch) • Three-year warranty See specifications chart on page 24. Get more done Just for our HVAC pros True RMS 321 322 902 True-rms AC current AC voltage Resistance Continuity DC volts DC current Min/Max/Avg Temperature Capacitance Functions Range 321 322 902 Current AC 0 to 400.0 A 1.8% ± 5 counts 1.8% ± 5 counts 0 to 600.0 A 2% ± 5 counts Current DC 0 to 200.0 A 1% ± 5 counts Voltage AC 0 to 600.0 V 1.2% ± 5 counts 1.2% ± 5 counts 600.0 V 1% ± 5 counts Voltage DC 0 to 600.0 V 1% ± 5 counts 1% ± 5 counts Resistance range 0 to 400 Ω 0 to 400 Ω 0 to 9999 Ω Jaw opening 25.4 mm 25.4 mm 30.5 mm Max. wire size 500 MCM 500 MCM 750 MCM Fluke 321Fluke 322 Fluke 902 Features Specifications
- 30. 28 Fluke 355 350 Series AC/DC Clamp Meters Included Accessories Fluke 353: C43 Soft Meter Case, 6 AA batteries, users manual Fluke 355: C43 Soft Meter Case, 6 AA batteries, TL224 SureGrip® Silicone Test Lead Set, TP2 Slim Reach Test Probe Set (2 mm), AC285 SureGrip® Alligator Clip Set, users manual Ordering information Fluke 353 AC/DC Clamp Meter Fluke 355 AC/DC Clamp Meter Confidently take reliable readings with the true-rms, Fluke 353/355 Clamp Meters; the tools of choice for high current measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high current applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode - ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors and industrial service technicians. TL223-1 (Fluke 355) See page 122 L215 (Fluke 355) See page 123 Features Recommended Accessories 353 355 True-RMS measurements Display backlight Motor start-up current Min/Max/Average Voltage AC/DC Resistance measurement Continuity measurement with beeper Specifications Fluke 353 Power Supply: 6 x 1.5V AA NEDA 15A or IEC LR6 Battery Life: 100 hours (with typical usage, backlight off) Functions Range 353 355 Current AC/DC 0-40.00 A 1.5% ± 15 counts 1.5% ± 15 counts 0-400.0 A 1.5% ± 5 counts 1.5% ± 5 counts 0-2000 A; 1400 AC rms Crest Factor 2.4 2.4 Voltage AC/DC 0-4.000 V 1% ± 10 counts 0-40.00 V 1% ± 5 counts 0-400.0 V 0-600 V AC rms 0-1000 V DC Resistance 0-400.0 Ω 1.5% ± 5 counts 0-4.000 kΩ 0-40.00 kΩ 0-400.0 kΩ Continuity beeper Appr. ≤ 30 Ω Frequency 5.0Hz to 100.0Hz 0.2% ± 2 counts 100.1Hz to 999Hz 0.5% ± 5 counts (Check the Fluke web for detailed specifications) Size (HxWxD): 300 mm x 98 mm x 52 mm Jaw opening: 58 mm Weight: 0.814 kg Two year warranty True RMS True-RMS, 2000 A Clamp Meters for industrial and utility applications
- 31. 29 360 Leakage Clamp Meter Included accessories Soft carrying pouch and users manual Ordering information Fluke 360 Leakage Clamp Meter The Fluke 360 is ideal for non-invasive checks of insulation resistance. The unique jaw design eliminates the influence of adjacent current conductors. The ergonomic design of the Fluke 360 ensures easy measuring. The measuring clamp fits into tight spaces and the wide display angle clearly shows the measurement result. The data hold button keeps the measured value on the display after removing the clamp for the measured conductor. The light Fluke 360 offers the widest range of current measurement for maintenance professionals and contractors. Features • Measurement of leakage protectives conductor and touch current with a resolution of 1μA • Advanced shielding to ensure accurate results when measuring near other conductors • Automatic ranging within the manually selected mA or A range • Easily viewed measurements on digital and bargraph display and HOLD when measuring in hard to see locations • Broad range of measurements currents up to 60 A for all installation needs • Easy carrying, pocket sized clamp with wide 40 mm jaw size • Display-Hold for convenience in use • Auto power off with audible warning buzzer • Conformance to IEC61010 and EMC standard • Meets all the applications and performance classes in safety standard VDE0404-4 and the new VDE0702 leakage current 0.5mA ground Specifications Fluke 360 Battery type: 3 Volt Lithium, 90 hours typical Size (HxWxD): 176 mm x 70mm x 25 mm Weight: 0.2kg One Year warranty Functions Range Resolution Accuracy Current AC 3mA 30mA 0.001A 0.01mA 1% ± 5 counts 30A 60A 0.01A 0.1A 1% ± 5 counts (0~50A) 5% ± 5 counts (50~60A) Frequency 50 and 60Hz (Check the Fluke web for detailed specifications) leakage current 1.2mA (e.g. via motor shaft) display: 1.7mA Leakage current measurements with a tough, pocket sized clamp meter
- 32. 30 T100 Series Voltage and Continuity Testers Included Accessories Two 1.5V batteries and instruction sheet Ordering Information Fluke T100 Voltage/Continuity Tester Fluke T120 Voltage/Continuity Tester Fluke T140 Voltage/Continuity Tester UK versions are compliant with GS38 Recommended Accessories C33 (T100 Series) See page 130 Size (HxWxD): 240 mm x 56 mm x 24 mm Case: IP65 (water-jet and dust tight protection) Weight: 180 g Two year warranty Features Specifications Fluke T140 Fluke T100 Fluke T120 T100 T120 T140 Display LCD LCD Led Bargraph 12 LED’s 12 LED’s 12 LED’s Backlight Resistance measurement Switchable load Voltage test Optical and acoustical continuity test Rotary field indication Single pole test for phase detection Indication of polarity Electrical torch function Probe tip protection The voltage display also functions when using discharged - or o batteries T100 T120 T140 Voltage AC/DC 12 - 690 V 12 - 690 V 12 - 690 V Continuity 0 - 400 kΩ 0 - 400 kΩ 0 - 400 kΩ Frequency 0 - 400 Hz 0 - 400 Hz 0 - 400 Hz Phase rotation 100 to 690 V 100 to 690 V 100 to 690 V Resistance measurement - - Up to 1999 Ω Response time < 0.1 s < 0.1 s < 0.1 s The fast and easy solution to voltage, continuity and resistance measurements. Ideal for site conditions, the 3 models of the T100 Series 2-pole testers have a rugged construction and ergonomically formed housing for perfect handling. All models offer a patented three-phase rotation detection system providing quick phase rotation indication. Moreover they have a special electrical torch function for working in low light level environments and have an ingress protection rating of IP65. The T100 Series are compliant with EN 61010-1 and EN61243-3 requirements. The fast and easy solution to voltage, continuity and phase rotation testing
- 33. 31 T5 Electrical Testers Included Accessories 2 TP38 detachable probe (CAT III), 2 TP1-1 detachable probe (CAT II), (detachable GS38 probes for the UK) and instruction sheet Ordering Information Fluke T5-600 Electrical Tester Fluke T5-1000 Electrical Tester Fluke T5-H5-1AC Kit Electrical Tester with holster and IAC Fluke T5-600/62/1AC-E Electrical Tester, IR Thermometer, Voltage Detector Kit The Fluke T5 testers let you check voltage, continuity and current with one compact tool. Select volts, ohms or current and the instrument does the rest. Model T5-600 measures 600 volts AC/DC, model T5-1000 is designed for 1000 volts. OpenJaw™ current technology lets you check current up to 100 A, without breaking the circuit. The optional H5 holster keeps the test probes and leads ready to test and lets you clip the T5 onto your belt. Recommended Accessories ACC-T5-Kit See page 123 AC285 See page 124 Features and Specifications Fluke T5-H5-1AC Kit Fluke T5-1000 (incl. TP1-1 test probes) Fluke T5-600 (incl. TP1-1 test probes) H5 See page 131 Battery life: 400 hours Size (HxWxD): 203 mm x 51 mm x 30.5 mm Fluke T5-H5-1AC Kit The ideal kit for busy electrical contractors and electricians. The benefits of a voltage and current meter and non- contact voltage detector all in one kit. A holster for the T5 is also included. Kit includes: - Fluke T5-1000 - H5 holster - Free Fluke 1AC-II Fluke T5-600/62/1AC-E Kit This kit is designed to help electricians and HVAC technicians solve problems quicker.Test first for overheated electrical devices using an IR thermometer; then use elecrtrical test tools to find out more about the problem. Kit includes: • Fluke T5-600 • Fluke 62 • Fluke 1AC II • C115 T5-600 T5-1000 Display Count 1000 1000 Automatic Selection Continuity and Bleeper Sleep Mode AC Voltage 600 V 1000 V DC Voltage 600 V 1000 V AC Current 100 A 100 A Resistance 1000 Ω 1000 Ω Safety range 600V CAT III 1000 V CAT III / 600 V CAT IV Weight: 0.38 kg Two year warranty The fast and easy solution to basic electrical testing Fluke T5-600/62/1AC-E Kit
- 34. 2AC 1AC-II LVD2 32 1AC II/2AC Volt Alerts LVD1/LVD2 Volt Lights 2AC is the latest addition to the VoltAlert™ ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it- yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. • Voltage detection from 200 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs. • NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready. • NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition* • Category IV – 1000 V overvoltage rated product for best in class user protection • Integrated clip design, optimized for pocket storage • Powered by 2x AAA batteries (included) • Fluke ruggedness and reliability • Two-year warranty storage. • Powered by 2x AAA batteries (included)- Fluke reliability and ruggedness, Two-year warranty. LVD2 LVD1 2AC VoltAlert™ Fluke 1AC II Fluke 2AC VoltAlert™ Ordering Information Fluke 1AC II Volt Alert Fluke 1AC II Volt Alert (5-pack) Fluke 2AC Volt Alert Fluke 2AC Volt Alert (5-pack) LVD2 Volt Light LVD1 Volt Light Dual sensitivity voltage detector • Detects voltage from 40 V to 300 V AC • Blue light means you’re close • Red light means you’re at the source • Comes with a versatile clip to secure light to pocket, hat or even panel door Combines bright light and voltage detection in one pen style design • Dual sensitivity • Detects voltage from 90 V to 600 V AC • Blue light means you’re close • Red light means you’re at the source • Rated to CAT IV 600 V LVD1 Volt Light LVD2 Volt Light Operating range: 200 – 1000 V AC Batteries: Two AAA Alkaline Size (H): 148 mm Two Year Warranty Fluke 2AC VoltAlert™ 5-pack • Buy 4 get 1 FREE The Fluke VoltAlert AC voltage detector is very easy to use – just touch the tip to a terminal strip, outlet or cord. When the tip glows red and the unit beeps, you know there is voltage on the line. • It continually tests its battery and its circuit integrity with a periodic double flash visual indication. • Highest safety rating: CAT IV 1000 V • Detects voltage without metallic contact Fluke 1AC II VoltAlert™ Operating range: 200 – 1000 V AC Batteries: Two AAA Alkaline Size (H): 148 mm Two Year Warranty Fluke 1AC II VoltAlert™ 5-pack • Buy 4 get 1 FREE Voltage Detection On/Off Button Dual Sensitivity Battery Check Audible/Silent Voltbeat™ LED Flashlight Battery Included Features 200-1000 V AC CAT IV 1000 V 200-1000 V AC CAT IV 1000 V 90-600 V AC CAT IV 600 V
- 35. 33 9040/9062 Phase Rotation Indicators Included Accessories Fluke 9040: Alligator clips - black (3) Standard test probes - black (3) Flexible test probes - black (3) Fluke 9062: Alligator clips - black (3) Flexible test probes - black (3) Test leads - black (3) Ordering Information Fluke 9040 Phase Rotation Indicator Fluke 9062 Motor and Phase Rotation Indicator Fluke 9040 The Fluke 9040 is effective for measuring phase rotation in all areas where three-phase supplies are used to feed motors, drives and electrical systems. The Fluke 9040 is a rotary field indicator and can provide clear indication of the 3 phase via an LCD display and the phase rotation direction to determine correct connections. It allows rapid determination of phase sequence and has a voltage (up to 700 V) and frequency range suitable for commercial and industrial applications. Test probes supplied with the instrument have a variable clamping range for safe contact, especially in industrial sockets. Fluke 9062 The unique Fluke 9062 provides rotary field and motor rotation indication with the benefits of contact-less detection. Purpose made for commercial and industrial environments, the Fluke 9062 provides rapid indication of 3 phase rotation using test leads supplied or can be used to determine motor rotation on synchronous and asynchronous 3 phase motors. The contact-less detection is ideal for use on motors where the shaft is not visible. Test probes supplied with the instrument have a variable clamping range for safe contact, especially in industrial sockets. Recommended Accessories TLK291 See page 123 C25 See page 130 Features 9040: TLK290 See page 123 9062: Specifications Size (HxWxD) Fluke 9040: 124 mm x 61 mm x 27 mm Size (HxWxD) Fluke 9062: 124 mm x 61 mm x 27 mm Fluke 9062 Applications Determine the rotation of running motors simply by placing the instrument on the motor casing. Check the correct rotation of motors prior to connection. Determine the presence of phase sequence of multiphase electrical supplies. 9040 9062 3 phase indication Via LCD Via LED Indication of phase rotation Indication of motor rotation direction Contact free determination of the rotation direction of running motors Clear LCD display No battery required 9040 9062 Voltage range 40 - 700 V Up to 400 V Phase display - 120 - 400 V AC Frequency range 15 - 400 Hz 2-400 Hz Operating time Continuous Continuous Power supply 9040: from unit under test Power supply 9062: 1 x 9V Weight 9040: 0.20 kg Weight 9062: 0.15 kg Two Year Warranty Take the guess work out of phase/motor rotation measurements Fluke 9040 Fluke 9062
- 36. 34 2042 Cable Locator Included Accessories TL27 Heavy Duty Test Lead Set (2) TP74 Lantern Tip Test Probe Set AC285 Alligator Clip Set Soft carrying case Hard case Ordering Information Fluke 2042 Cable Locator (transmitter + receiver) Fluke 2042T Cable Locator Transmitter The Fluke 2042 is a professional general purpose cable locator. It is ideal for tracing cables in walls and underground, locating fuses/breakers on final circuits and locating interruptions and short- circuits in cables and electrical floor heating systems. It can also be used for tracing metallic water and heating pipes. The unit is supplied as a complete kit comprising of a transmitter and receiver in a purpose- made carry case. The receiver also incorporates a torch function for working in dimly lit locations. • For all applications (live or dead cables) without additional instruments • Set includes a transmitter and a receiver • Proven digitally coded sender signal guarantees clear signal identification • Transmitter with LCD-display for transmitting level, transmitting code and external voltage • Receiver with a backlight LCD-display for level of receiving signal, code of receiving signal and live voltage indication • Automatic or manual adjustment of receiving signal sensitivity • Switchable acoustic receiving signal • Auto-Power-Off • Additional torch lamp function for working in dark environments • Additional transmitters are available for extension or to distinguish between several signals. Recommended Accessories Fluke 2042T Specifications Receiver Batteries Transmitter: 6 pc Batteries 1.5V Batteries Receiver: 1 pc Battery 9V Size (HxWxD) Transmitter: 190 mm x 85 mm x 50 mm Size (HxWxD) Receiver: 250 mm x 65 mm x 45mm Weight Locator: 0.45 kg Weight Receiver: 0.36 kg Two Year Warranty Fluke 2042 applications Tracing of underground cables (max. depth 2.5 m) Precise location of cable interruptions with additional transmitter Location of fuses/breakers and assignment to circuits Transmitter Fluke 2042 Transmitter Receiver Voltage Measurement Range 12V, 50V,120V, 230V, 400V Frequency Range 0..60 Hz Output signal 125 kHz Voltage Up to 400V AC/DC Tracing depth cable location 0...2.5m wall/underground cables Main voltage detection 0...0.4m The multipurpose solution to cable location
- 37. 35 With a 10kV insulation resistance tester and a range of compact hand- held instruments, we offer a solution for every troubleshooting and preventive application. Two of the digital hand-held insulation testers also include full-featured multimeters. The Fluke Earth Ground Testers can perform all four types of earth ground measurement, including stakeless testing with earth ground loop resistances using only clamps. Insulation Testers and Earth Ground Testers
- 38. 36 Insulation Tester Selection Guide 1577 1587 1587T 1503 1507 1550C 1555 InstallationTest Functionality Test voltages 500V, 1000V 50V, 100V, 250V, 500V, 1000V 50V, 100V 500V, 1000V 50V, 100V, 250V, 500V, 1000V 250V, 500V, 1000V, 2500V, 5000V 250V, 500V, 1000V, 2500V, 5000V, 10000V Insulation Resistance Test Range 0.1MΩ - 600MΩ 0.01 MΩ - 2GΩ 0.01MΩ - 100MΩ 0.1MΩ - 2GΩ 0.01MΩ - 10GΩ 200KΩ - 1TΩ 200KΩ - 2TΩ Polarization Index/Dielectric Absorption Ratio Auto Discharge Time Ramp test (Breakdown) Pass/Fail Comparison Estimated Number of Insulation resistance Tests 1000 1000 1000 1000 1000 1000 @ 5000 V 1000 @ 10000 V Voltage > 30V Warning Memory (99 locations) (99 locations) Remote Test Probe Lo Ohms Display Digital LCD Digital LCD Digital LCD Digital LCD Digital LCD Digital LCD / Analog Bar Graph Digital LCD / Analog Bar Graph Continuity (200mA) (200mA) Multimeter Functionality AC/DC Volts Current Resistance Temperature (contact) Lo-Pass Filter Capacitance Diode Test Frequency MIN/MAX Other Hold/Lock Backlight Software (Fluke View® Forms Basic) (Fluke View® Forms Basic) Warranty (in years) 3 3 3 1 1 3 3 Battery 4 AA (NEDA 15A or IEC LR6) 4 AA (NEDA 15A or IEC LR6) 4 AA (NEDA 15A or IEC LR6) 4 AA (NEDA 15A or IEC LR6) 4 AA (NEDA 15A or IEC LR6) Rechargeable Rechargeable Fluke 1587/ET Advanced Electrical Troubleshooting Kit This kit contains: • Fluke 1587 Insulation Multimeter • Fluke 62 Mini Infrared Thermometer • i400 Current Clamp Perform insulation tests with the Fluke 1587 plus a wide-range of DMM tasks with confidence and ease. Use the i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit. Check for hot spots and measure temperature with the Fluke 62 Mini non-contact thermometer. Fluke 1587/ET Fluke 1587/MDT Fluke 1587/MDT Advanced Motor & Drive Troubleshooting Kit This kit contains: • Fluke 1587 Insulation Multimeter • Fluke 9040 Phase Rotation Indicator • i400 Current Clamp Perform insulation tests with the Fluke 1587 plus a wide-range of DMM tasks with confidence and ease. Use the i400 with your Fluke 1587 to accurately measure AC current without breaking the circuit. Check the phase- rotation of three-phase motors easily and safely with the Fluke 9040. Buy a Fluke 1587 Combo Kit and save
- 39. 37 Insulation features User selectable test voltages for many applications Additional test voltages 50V, 100V, 250V Special remote control probe for easy and safe measurements Auto-discharge of capacitive voltage for added user protection Live circuit detection prevents insulation test if voltage > 30V is detected for added user protection 1577/1587 Insulation Multimeters Included Accessories C101 Rugged, utility hard case TL224 SureGrip Silicone Test Lead Set AC285 SureGrip Alligator Clip Set 80BK Integrated DMM Temperature Probe (Type K) TP165X Remote Test Probe Ordering Information Fluke 1577 Insulation Multimeter Fluke 1587 Insulation Multimeter Fluke 1587T Insulation Multimeter (for Telecom) The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured True RMS digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventive maintenance. Whether you work on motors, generators, cables, or switch-gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks. The Fluke 1587T is specially designed for the telecom environment. Recommended Accessories TL238 See page 122 Multimeter Specifications Fluke 1577 Fluke 1587 Fluke 1587T Features Insulation Specifications Battery life: Meter: 1000 hrs, Insulation Test: >1000 tests Size (HxWxD): 203 mm x 100 mm x 50 mm L215 See page 123 TPAK See page 132 i400 See page 126 C25 See page 130 Multimeter Features 1577 1587 1587T True RMS Voltage and Current for accurate measurements Digital display counts 6000 6000 6000 Autorange and manual range for easy testing. Selectable filter for accurate voltage and frequency measurements on motor drives Min Max Recording, Diode test, temperature, capacitance & frequency measurement for maximum flexibility. Functions 1577 1587 1587T Measurement range 0.1MΩ to 600MΩ 0.01MΩ to 2GΩ 0.01MΩ to 100MΩ Test voltages 500V, 1000V 50V, 100V, 250V, 500V, 1000V 50V, 100V Test voltage accuracy + 20%, -0% + 20%, -0% + 20%, -0 % Insulation test current 1mA nominal 1 mA nominal 1 mA nominal Auto discharge Discharge time < 0.5s for C = 1 μF or less Discharge time <0.5s for C = 1 μF or less Discharge time <0.5s for C = 1 μF or less Maximum capacitive load Up to 1 μF load Up to 1 μF load Up to 1 μF load General features Auto Power off to save batteries Large display with backlight Input Alert to warn for incorrect connections Continuity Functions Maximum Max. resolution 1577 1587/1587T Voltage DC 1000V 1 mV ± (0.2% + 2) ± (0.09% + 2) Voltage AC 1000V 0.1mV ± (2% + 3) ± (2% + 3) Current DC 400mA 0.01mA ± (1.0% + 2) ± (0.2% + 2) Current AC 400mA 0.01mA ± (2% + 2) ± (1.5% + 2) Resistance 50.0MΩ 0.1Ω ± (1.2% + 2) ± (0.9% + 2) Capacitance 9999μF 1 nF - ± (1.2% + 2) Frequency 99.99kHz 0.01 Hz - ± (0.1% + 1) Temperature -40°C to +537°C 0.1°C - ± (1% + 10) Weight: 0.55 kg Three Year Warranty Two powerful tools in one
- 40. 38 1503/1507 Insulation Testers Included Accessories TP165x Remote Test Probe TL224 SureGrip Silicone Test Lead Set TP74 Lantern Tip Test Probe Set Alligator clips Ordering Information Fluke 1503 Insulation Tester Fluke 1507 Insulation Tester When you need a low cost solution to general purpose insulation testing look no further than the new Fluke insulation tester range. The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable and easy to use. The multiple test voltages on both models make them ideal for many troubleshooting, commissioning and preventive maintenance applications. Additional features like the remote probe save both time and money when performing tests. Recommended Accessories L210 See page 133 Fluke 1503/1507 Applications Fluke 1503 Features Specifications Battery life: Insulation Test: > 1000 tests Size (HxWxD): 203 mm x 100 mm x 50 mm AC285 See page 122 TLK 225 See page 123 PAK See page 132 C101 See page 131 Fluke 1507 Insulation test at a distribution panel Wiring test in a small distribution box – all in one spot 1503 1507 User selectable test voltages for many applications Additional test voltages 50V, 100V, 250V Special remote control probe for easy and safe measurements Auto-discharge of capacitive voltage for added user protection Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio Auto Power off to save batteries Large display with backlight Continuity function (200 mA) Compare function (pass/fail) for fast repetitive tests Insulation specifications 1503 1507 Insulation test range 0.1 MΩ to 2 GΩ 0.01 MΩ to 10 GΩ Test voltages 500 V, 1000 V 50 V, 100 V, 250 V, 500 V, 1000 V Test voltage accuracy + 20 %, - 0 % + 20 %, - 0 % Insulation test current 1mA nominal 1mA nominal AC/DC Voltage measurement 600 V (0.1 V resolution) 600 V (0.1 V resolution) Resistance measurement range 0.01 Ω to 20 kΩ 0.01 Ω to 20 kΩ Auto discharge Discharge time < 0.5 second for C = 1 μF or less Discharge time < 0.5 second for C = 1 μF or less Maximum capacitive load Up to 1 μF Up to 1 μF Open circuit test voltage > 4 V , < 8 V > 4 V , < 8 V Short circuit current > 200 mA > 200 mA Weight: 0.55 kg One Year Warranty Truly portable insulation resistance testers
- 41. 39 1555/1550C Insulation Resistance Testers The new 1555 and redesigned Fluke 1550C insulation resistance testers offer digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3-year warranty and CAT IV 600 V safety rating. With measurement storage and PC interface, the 1555 and 1550C are perfect tools for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur. • Test voltages up to 10 kV (1555) provides solutions for all applications • CAT III 1000 V, CAT IV 600 V safety rating • Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety Fluke 1555 Fluke 1550C Included accessories Test Cables with Alligator Clips (red, black, green) Infrared adapter with interface cable FlukeView Forms Basic CD-ROM AC Power Cord Soft Carrying Case (base models only) English Manual Users Manual on CD-ROM Quick Reference Card Software License Agreement Registration Card FlukeView Forms Installation Guide USB-IR Cable Installation Guide IP67 Hard Case (kit only) Certificate of Calibration (kit only) Ruggedized Alligator Clips (kit and 1555 only) Software specifications Fluke ViewForms basic software requires a PC running Windows 2000, Windows XP and Windows Vista. Optional Accessories TL1550EXT 25 Foot Extended Test Lead Set Ordering information Fluke 1550C 5 kV Insulation Tester Fluke 1555 10 kV Insulation Tester Fluke 1550C/Kit 5 kV Insulation Tester Kit Fluke 1555/Kit 10 kV Insulation Tester Kit Test voltage (dc) Range Accuracy (± reading) 250 V < 200 kΩ 200 kΩ to 5 GΩ 5 GΩ to 50 GΩ > 50 GΩ unspecified 5 % 20 % unspecified 500 V < 200 kΩ 200 kΩ to 10 GΩ 10 GΩ to 100 GΩ > 100 GΩ unspecified 5 % 20 % unspecified 1000 V < 200 kΩ 200 kΩ to 20 GΩ 20 GΩ to 200 GΩ > 200 GΩ unspecified 5 % 20 % unspecified 2500 V < 200 kΩ 200 kΩ to 50 GΩ 50 GΩ to 500 GΩ > 500 GΩ unspecified 5 % 20 % unspecified 5000 V < 200 kΩ 200 kΩ to 100 GΩ 100 GΩ to 1 TΩ > 1 TΩ unspecified 5 % 20 % unspecified 10000 V (1555 only) < 200 kΩ 200 kΩ to 200 GΩ 200 GΩ to 2 TΩ > 2 TΩ unspecified 5 % 20 % unspecified Bar Graph Range 0 to 1 TΩ & 0 to 2 TΩ (1555 only) Insulation test voltage accuracy -0 %, +10 % at 1 mA load current Induced ac mains current rejection 2 mA maximum Charging rate for capacitive load 5 seconds per μF Discharge rate for capacitive load 1,5 s/μF Range Accuracy Leakage current measurement 1 nA to 2 mA ± (5% + 2 nA) Capacitance measurement 0,01 uF to 15,00 μF ± (15% rdg + 0,03 μF) Timer Range Resolution 0 to 99 minutes Setting: 1 minute Indication: 1 second Live circuit warning Warning range Voltage accuracy 30 V to 660 V ac/dc, 50/60 Hz ± (15% + 2 V) Specifications (Check the Fluke web for detailed specifications) • Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V • Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall • Long battery life gives the user over 750 tests between charges • Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup • Guard system eliminates the effect of surface leakage current on high- resistance measurements • Large digital/analog LCD for easy viewing • Capacitance and leakage current measurement • Ramp function for breakdown testing • Resistance measurements up to 2TΩ • Timer settings up to 99 minutes for timed tests • 3-year warranty Digital insulation testing up to 10kV Temperature (operating): -20 °C to 50 °C ( -4 °F to 122 °F) Temperature (storage): -20 °C to 65 °C (-4 °F a 149 °F) Humidity: 80 % to 31 ºC decreasing linearly to 50 % at 50 ºC Enclosure sealing: IP40 Altitude: 0 to 2000 m Power: 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 Dimensions: 170 mm x 242 mm x 330 mm Weight: 3,6 kg (7,94 lb) 3-year warranty New
- 42. 40 1620 Series Earth Ground Testers GEO The new Fluke 1620 Series Earth Ground Testers not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods. ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test. Offering ‘one-button’ simplicity, the 1623 is an all-in-one earth ground tester, while the 1625 has extra versatility for more demanding applications. Earth ground resistance and soil resistivity should be measured when: • Designing earth ground systems • Installing new ground system and electrical equipment • Periodically testing ground and lightning protection systems • Installing large electrical equipment such as transformers, switchgears, machines, etc. EI-162BN 320mm Split core transformer for selective measurements on high voltage pylons Features Included accessories Fluke 1623: Protective holster, 2 test leads, 2 alligator clips, users manual Fluke 1623 Kit: same as above plus stake/reel Set 4 pole and selective/stakeless clamp set Fluke 1625: Protective holster, 2 test leads, 2 alligator clips, users manual Fluke 1625 Kit: same as above plus stake/reel set 4 pole and selective/stakeless clamp set Ordering information Fluke 1623 Basic GEO Earth Ground Tester Fluke 1623 Kit Basic GEO Earth Ground Tester Kit Fluke 1625 Advanced GEO Earth Ground Tester Fluke 1625 Kit Advanced GEO Earth Ground Tester Kit Battery type: 6 x AA alkaline cells Size (HxWxD): 110 mm x 180 mm x 240 mm Weight – 1623 Geo: 1.1 kg (including batteries) 1625 Geo: 1.1 kg (including batteries) Two Year Warranty 1623 1625 Resistance ranges 0 to 20 kΩ 0 to 300 kΩ Operating error ± 5% ± 5% Test voltage 48 V 20 / 48 V Short circuit current > 50mA 250 mA ES-162P4 Stake/reel set for 4 pole measurements ES-162P3 Stake/reel set for 3 pole measurements EI-1625 Selective/stakeless clamp set for 1625 EI-1623 Selective/stakeless clamp set for 1623 1623 1625 One-button measurement concept 3- and 4-pole earth ground measurement 4-Pole soil resistivity testing 2-Pole resistance measurement AC 2-and 4-pole resistance measurement DC Selective testing, no disconnection of ground conductor (1 clamp) Stakeless testing, quick ground loop testing (2 clamps) Measuring frequency 128 Hz Earth impedance measurement at 55 Hz Automatic frequency control (AFC) (94 – 128 Hz) Measuring voltage switchable 20/48V Programmable limits, settings Continuity with buzzer Dust/water resistance IP56 IP56 Safety rating CAT II 300 V CAT II 300 V Specifications Recommended Accessories (Check the Fluke web for detailed specifications) Advanced technology for all your earth ground testing applications Fluke 1625 kit Fluke 1623 Fluke 1625
- 43. 41 1621 Earth Ground Tester The Fluke 1621 is an easy-to-use earth ground tester. The first line of defense in detecting reliable ground connections, the unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth tester, for most work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy tool for electrical contractors, utility test engineers, and earth ground specialists. Fluke 1621 Included accessories Two measuring leads with alligator clips - 2 m, protective holster, users manual, CD-ROM Ordering information Fluke 1621 Earth Ground Tester Battery type: 1 x 9 V alkaline (LR61) Size (HxWxD): 216 mm x 113 mm x 54 mm Weight: 0.850 kg Two Year Warranty 1621 Resistance range 0.15 Ω to 2 kΩ Basic accuracy ± 6% of measured value + 5D Operating error according EN61557 ± 18% of measured value +5D Test voltage 23 to 24 V AC Short circuit current > 50 mA AC ES-162P3 Stake/reel set for 3 pole measurements GEO EARTH STAKE Ground Earth Stake GEO CABLE-REEL 50M Ground Earth Cable Reel 50 M Wire GEO CABLE-REEL 25M Ground Earth Cable Reel 25 M Wire Specifications Recommended Accessories (Check the Fluke web for detailed specifications) Features • 3-pole Fall-of-Potential earth testing for basic measurements • 2-pole resistance measurements for added versatility • Easily capture values with single-button operation • Ensure accurate measurements with automatic ‘noise’ voltage detection • Hazardous voltage warning offers increased user protection • Clearly read and record data with a large, backlit display • Rugged holster and design for tough work environments • Portable size allows for easy transportation • Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting • Safety rating CAT II 600 V Handheld earth ground testing for mobile use
- 44. Rg .....Rn 1630 EARTH GROUN D CLAMP 300 V CAT mA A OFF HOLD FUNC REC R1 R2 R3 R1 Rg R2 .....Rn 163 0 EAR TH GRO UND CLAM P 300 V CAT mA A OFF HOL D FUNC REC Rg 163 0 EAR TH GRO UND CLAM P 300 V CAT mA A OFF HOL D FUNC REC 42 1630 Earth Ground Clamp Meter The Fluke 1630 earth ground clamp meter simplifies ground loop testing and enables non-intrusive leakage current measurement. The ground loop testing is also known as “stakeless” earth ground testing. To carry out the measurement there is no need for placing earth stakes and disconnecting the earth system from the electrical installation. The Fluke 1630 combines the two current clamps needed to perform the stakeless ground loop test in one compact and easy to use instrument. • Ground loop resistance testing without any disconnection or additional earth stakes • Earth ground leakage current measurement for system troubleshooting • True RMS AC current measurement range up to 30 A Fluke 1630 Included Accessories Rugged carrying case with belt, Resistance test loop, 9 V battery, Operating instructions. Ordering Information Fluke 1630 Earth Ground Clamp Meter Weight: 0.64 kg Conductor Size: 35 mm approx. Size (HxWxD): 257 mm x 100 mm x 47 mm Battery type: 9 V IEC 6 LR 61 Two Year Warranty Range Max. resolution Resistance 0.025 to 1500 Ω 0.002 Ω Cntinuity buzzer < app. 40 Ω Leakage current 0.2 to 1000 mA 0.001 mA Current 0.2 to 30 A 0.01 A Specifications Ground resistance measurements principle (Check the Fluke web for detailed specifications) • Rapid evaluation of continuity without disconnection and audible HI/LO alarm • Display-HOLD function to freeze measurements • Recording function for automatic storage of measured values, which can be recalled later on the LCD display • Automatic self calibration ensures correct measurement every time The Fluke 1630 is ideally suited for the following applications: • Ground loop checks on any earthing system • Continuity tests on earth bonding circuits and connections • Inspection of lightning protection systems • Leakage current measurement for troubleshooting on earth ground systems Fast and easy earth ground loop testing Ground resistance measurements principle Equivalent circuit diagram
- 45. 43 Our multifunction testers have redefined the standards for ease-of-use. With new features like the fast, high current loop test, RCD Type B compatibility, extended memory, and the fact they are designed for ensuring fixed wiring installed according to IEC 60364,they perform all tests required to verify safety. Our Portable Appliance Testers verify the safety and operation of portable appliances, and are designed for ‘one- touch’ operation and a fast throughput.” Installation Testers/ Portable Appliance Testers
- 46. 44 1650 Series Multifunction Installation Testers Safer, easier installation testing. The new 1650 Series builds on the rugged reputation of the earlier 1650 Series, only it’s re-designed to meet your need for more productive test tools. With new features like the fast, high current loop test (including a non-trip test) and a variable RCD trip current setting, accuracy is even better and the test cycle even faster. And with the addition of a unique zero adapter accessory for accurate mains test lead compensation, the 1650 Series continues to set the standard in installation testers. The 1650 Series testers verify the safety of electrical installations in domestic, commercial and industrial applications. They can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364, HD 384 and BS 7671 17th Edition wiring regulations. 1654B - The complete tester for advanced users This is the instrument that has it all, in a word: it’s complete. From all the test functions you need to in-built memory for documenting results. This makes it the complete solution for professionals, especially contractors, everyone who would want to have the best tool available and always understands (or know) how to use. 1653B - The ideal tester for professional trouble-shooters This is the instrument that is indeed ideal for professional users due to its additional functionality. It is also ideal since even though it has high-end features, it is still easy to use – even after longer periods of non-use; because operating it is intuitive and not forgotten easily. 1652C - The everyday tester, for every electrical installer This is the instrument that can be used every single day (day in, day out), and covers all the basic needs. It is the preferred tester for every front-line electrician/installer. Extra functionality, faster testing, and as rugged as ever BS7671 17th Edition IEE Wiring Regulations IEC 60364.6.61, HD 384 Included Accessories 6 AA Cell batteries C1600 Hard carrying case Zero Adapter Mains test cord TL165X STD Standard Test Lead Set TL165/UK Fused Test Lead Set (UK only) Padded carrying strap Quick reference guide TP165X Remote control probe and lead Users manual on CD-ROM Ordering Information Fluke 1652C Multifunction Installation Tester Fluke 1653B Multifunction Installation Tester Fluke 1654B Multifunction Installation Tester Check the Fluke website for the various software modules Features Measurement Function 1652C 1653B 1654B Voltage & Frequency Insulation Resistance Continuity & Resistance Loop & Line Resistance Loop & Line Resistance–m resolution Prospective Earth Fault Current (PEFC/IK) Prospective Short-Circuit current (PSC/IK) RCD switching time RCD tripping level ramp test ramp test ramp test RCD variable current Automatic RCD test sequence Test pulse current sensitive RCDs (Type A) Test smooth dc sensitive RCDs (Type B) Earth Resistance Phase Sequence Indicator Other Features Self-test Illuminated Display Memory, Interface Memory Extended Memory Computer Interface Time and date (When used with FlukeView software) Software Included Accessories Hard case Remote control probe Zero Adapter TLK290 MTC1363 (UK) MTC77 (Europe) ES165X 1653B & 1654B FVF-SC2 Fluke 1654B Fluke 1653B Fluke 1652C New RCD Type B Compatibility Recommended Accessories See also page 48 for more details
- 47. 45 1650 Series Multifunction Installation Testers Slim probe design Thanks to its slim probe with integral test button, you can safely make one-handed measurements on hard to reach points, while keeping your eyes on the panel. This remote probe is powered by the tester so always operable (does not require additional batteries!). Complete kit All 1650 models are equipped with detachable leads that can be replaced in case of damage or loss. A durable hard case will protect your instrument in tough field conditions. Zero Adaptersign For easy, always reliable and accurate compensation for test leads and mains cords. This adapter can be used for all different kind of mains plugs as well as test accessories like probes, alligator clips etc. Extra functionality, faster testing, and as rugged as ever Specifications (Check the Fluke web for detailed specifications) AC Voltage Measurement Range Resolution Accuracy 50 Hz - 60 Hz Input Impedance Overload Protection 500 V 0.1 V ± (0.8% + 3 digits) 3.3 M 660 Vrms RCD Testing RCD Type [6] Model 1652C Model 1653B Model 1654B AC [1] G [2] • • • AC S [3] • • • A [4] G • • • A S • • • B [5] G • B S • Notes [1] AC - Responds to ac [2] G - General, no delay [3] S - Time delay [4] A - Responds to pulsed signal [5] B - Responds to smooth dc [6] RCD test inhibited for V >265 ac RCD tests permitted only if the selected current, multiplied by earthing resistance, is <50 V. PFC. PSC Test Range 1000A / 10kA(50kA) Resolution and Units 1A / 0.1kA Accuracy Determined by accuracy of loop resistance and mains voltage measurements Computation Prospective Earth Fault Current (PEFC) or Prospective Short Circuit Current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively. Tripping Time Test ( T) Current Settings Multiplier Test Current Accuracy Trip Time Accuracy 10, 30, 100, 300, 500, 1000 mA, VAR x 1/2 + 0% - 10% ± (1% Reading + 1 digit) 10, 30, 100 mA X 5 + 10% - 0% ± (1% Reading + 1 digit) Loop Impedance Measurement Range Resolution Accuracy [1] 10 0.001 Hi Current m mode: ± (2 % + 15 digits) 20 0.01 No Trip mode: ± ( 3 % + 6 digits) Hi Current mode: ± (2 % + 4 digits) 200 0.1 No Trip mode: ± (3 %) Hi Current mode: ± (2 %) 2000 1 ±6 % [2] Notes [1] Valid for resistance of neutral circuit <20 and up to a system phase angle of 30°. Test leads must be zeroed before testing. [2] Valid for mains voltage >200 V. Earth Resistance Test (RE) – Fluke 1654B and 1653B only Range Resolution Accuracy 200 0.1 ± (2% + 5 digits) 2000 1 ± (3.5% + 10 digits) Continuity Testing Ratnge (autoranging) Resolution Test Current Open Circuit Voltage Accuracy 20 00.1 > 200 mA > 4 V ± (1.5%+3 digits)200 0.1 2000 1 Tripping Current (Ramp) Test Current Range Step Size Dwell Time Measurement AccuracyType G Type S 30 % to 110 % of RCD rated current [1] 10 % of I N [2] 300 ms/step 0 ms/step ±5 % Notes [1] 30 % to 150 % for Type A N >10 mA 30 % to 210 % for Type A N =10 mA 20 % to 210 % for Type B Specified trip current ranges (EN 61008-1): 50 % to 100 % for Type AC 35 % to 140 % for Type A ( >10 mA) 35 % to 200 % for Type A ( 10 mA) 50 % to 200 % for Type B [2] 5% for Type B Insulation Resistance Measurement Model Test Voltage Insulation Resistance Range Resolution Test Current Accuracy 1653B / 1654B 50 V 10 k to 50 M 0.01 M 1 mA @ 50 k ± (3%+ 3 digits) 1653B / 1654B 100 V 20 k to 100 M 0.01 M 0.1 M 1 mA @ 100 k ± (3%+ 3 digits) 1653B / 1654B 1653B / 1654B 250 V 20 k to 200 M 0.01 M 0.1 M 1 mA @ 250 k ± (1.5%+ 3 digits) 1653B / 1654B 1652C 1653B / 1654B 500 V 20 M 200 M 500 M 0.01 M 0.1 M 1 M 1 mA @ 500 k ± (1.5%+ 3 digits) + 10% 1653B / 1654B 1652C 1000 V 20 M 200 M 1000 M 0.1 M 1 M 1 mA @ 1 M ± (1.5%+ 3 digits) + 10% Battery type: Alkaline supplied. usable with 1.2 V NiCD or NiMH rechargeable batteries Size (HxWxD): 100 mm x 250 mm x 125 mm Weight: 1.3 kg Three Year Warranty
- 48. 46 6000 Series PAT Testers The Fluke 6200 and 6500 PAT testers verify the electrical safety and operation of portable appliances in accordance with relevant guidelines and regulations. With powerful auto test capabilities and simplified controls they increase the number of tests you can perform per day without compromizing results. A choice of automatic and manual PAT testers Both models perform all the tests required for class I and class II appliances. For manual testing and low volume applications, choose the cost- effective 6200 PAT model. If you need a more powerful instrument to test large numbers of appliances, the 6500 is the right choice. Fluke simplifies portable appliance testing • Compact and lightweight… Efficient to work with and easy to carry around– and has extra space in the hard case for accessories. • One touch simplicity… Pre-set and user-definable test routines are initiated from a single button – to speed up test procedures and save you time on site. • A better way of working… Rapid data entry via a QWERTY keyboard (or optional Fluke barcode scanner) and fast data transfer from the main memory or the Compact Flash memory card (6500). Included Accessories Test lead, Test probe, Crocodile clip, Mains cord Ordering Information Fluke 6200 PAT Tester Fluke 6500 PAT Tester Not available in all countries Fluke 6500 Fluke 6200 Also available with European mains socket. Versatile PAT testing at your fingertips 6200 6500 Front panel results management 230V BS1363 Test socket / 230V Mains BS1363 input power plug IEC Lead Test Auto-testing Pass / Fail Level Programmable Indicators Data Storage Limited Data Storage Polarity Checks Graphical Help Menu On Line Programme Mode Real time clock External printer output Front Panel QWERTY Key pad Measurement functions 6200 6500 L N Mains Volts Outside Limits Indicators Null out facility for earth bond lead Protective Earth Resistance PE (200mA) Protective Earth Resistance PE (25A) Insulation 500V dc Protective Earth Conductor Current Touch Current Substitute Leakage Current Appliance Power kVA Appliance Load Current Seven Segment Custom LCD Graphical LCD Back Light Compact Flash Card receptacle Serial Port - Printing / Downloading Features • Dedicated key for each test for ‘one- touch’ testing • Pre-set pass/fail levels to save time • Large backlit display for easy reading As 6200 but also with: • Integral QWERTY keyboard for rapid data entry • Slot for Compact Flash memory card for back-up data storage and transfer to PC • Pre-set, auto-test sequences for user convenience
- 49. 47 Separate hard case The compact Fluke PAT testers are supplied with a hard carrying case that not only offers protection during transit but also includes extra storage space for accessories and other tools. They’re extremely light, weighing approximately 3 kg (without case) and have integral carrying handles for extra convenience. Special PAT Kit If you need a complete PAT tester solution, a purpose made kit is available. Fluke 6500/UK Kit Contains: • 6500, Mainframe • EXTL 100, Extension lead test adaptor • SP Scan 15, Barcode scanner • Fluke PowerPat Plus • Pass 560R, Appliance pass labels • Fail 100S, Appliance fail labels APP 1000, Barcode appliance number labels (Kit contents may vary per country) 6000 Series PAT Testers Power-on Test The test indicates reversed L-N, missing PE, and measures the mains voltage and frequency. Display Range 90 V to 264 V Accuracy at 50 Hz ± (2% + 3 counts) Resolution 0.1V (1V - model 6200) Input Impedance > 1 MΩ // 2.2 μF Maximum Input Mains Voltage 300 V Insulation Test (Riso) Display Range 0 to 299 MΩ Accuracy ± (5% + 2 counts) from 0.1 to 50 MΩ ± (10% + 2 counts) from 50 to 299 MΩ Resolution 0.01 MΩ (0 to 19.99 MΩ) 0.1 MΩ (20 to 199,9 MΩ) 1 MΩ (200 to 299 MΩ) Test Voltage 500 V DC - 0% + 25% at 500 kΩ load Test Current > 1 mA at 500 kΩ load, < 15 mA at 0 Ω Auto discharge time < 0.5 s for 1 μF Max. Capacitive Load Operational up to 1 μF Earth Bond Test Display Range 0 to 19.99 Ω Accuracy (after Bond Test zeroing) ± (5% +4 counts) Resolution 0.01Ω Test Current 200 mA AC - 0% + 40% into 1.99Ω 25 A AC ± 20% into 25 mΩ at 230 V Open Circuit Voltage > 4 V AC, < 24 Vac Bond Test zeroing can subtract up to 1.99Ω Touch Current Test Display Range 0 to 1.99 mA ac Accuracy ± (4% + 2 counts) Resolution 0.01 mA Internal Resistance (via probe) 2 kΩ Measuring method Probe The appliance under test is energized at mains potential. Substitute Leakage Current Test Display Range 0 to 19.99 mA ac Accuracy ± (5% + 5 counts) Resolution 0.01 mA Test Voltage 35 V AC ± 20% Operational Error 10% Load/Leakage Test: Load Current Display Range 0 to 13 A Accuracy ± (4% + 2 counts) Resolution 0.1 A The appliance under test is energized at mains potential Load/Leakage Test: Load Power Display Range 0 to 999 VA 1.0 kVA to 3.2 kVA Accuracy ± (5% + 3 counts) Resolution 1 VA (0 to 999 VA) 0.1 kVA (1.0 kVA to 3.2 kVA) The appliance under test is energized at mains potential Load/Leakage Test: Leakage Current Display Range 0.25 to 19.99 mA Accuracy ± (4% + 4 counts) Resolution 0.01 mA The appliance under test is energized at mains potential PELV Test Accuracy at 50 Hz ± (2% + 3 counts) Overload protection 300 Vrms Warning threshold 25 Vrms Recommended Accessories Display Screens Earth Bond Test (RPE)Substitute Leakage Current Test Touch Current TestInsulation Test (RISO) The accuracy specification for the display range is defined as ± (%reading + digit counts) at 23 °C ± 5 °C, ≤ 75 % RH. Between 0 °C and 18 °C and between 28 °C and 40 °C, accuracy specifications may degrade by 0.1 x (accuracy specification) per °C. The measurement range meets the service operating errors specified in EN61557-1: 1997, EN61557-2: 1997 , EN61557-4: 1997. Size (HxWxD): 200 mm x 275 mm x 100 mm Weight: 3 kg Two Years Warranty See also page 48 for more details Specifications BDST3 Snap Tags Cable Tie PASS Appliance 560R Pass Labels SP-SCAN-15 Barcode scanner (6500 Fluke only) SP1000-02 Mini printer Fluke PowerPat Plus software
- 50. 48 ES165X Earth Spike Test Kit (Fluke 1653B and 1654B) Earth Spike Test kit contents: • Auxiliary earth probes • Test connection leads and crocodile clips • Purpose-made carry case 1650 Series/6000 Series Accessories FVF-SC2 Fluke ViewForms Software (Fluke 1653B) To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. Download the data from the Fluke 1653B and create an easy report. The Fluke ViewForms Software also supports other Fluke tools. See page 132. TLK 290 Test Probe Kit • Kit includes three flexible socket probes and a large alligator clip • To be used on three phase sockets • Probes have flexible width test points that fit securely in 4 to 8 mm sockets • CAT III 1000 V, 8 A Mains Test Cord for 1650B series MTC1363 UK plug MTC77 Schuko plug PASS560R Appliance Pass Labels Quantity 500 APP1000/APP2000 Bar Code Appliance Number Labels APP1000: Labels numbered 0001-1000 APP2000: Labels numbers 1001-2000 Label number >2000 on request BDST3/BDST4 Snap Tags BDST3: Cable Tie BDST4: Clip On Quantity 20. Without labels. EXTL100 Extension Lead Test Adaptor Adaptor for testing extension leads. Allows the earth test lead to be connected to the extension leads to perform insulation and earth bond tests. SPScan15 Barcode Scanner Easy to use, low current, intelligent barcode reader. SPScan15 can be used to scan barcodes attached to curved surfaces or where actual contact with the barcode surface is difficult. SP1000 Mini Printer Without using any additional software the SP1000 can be used to directly printout stored test records on to thermal paper. The printer is compact and easily transported and is ideal for test professionals who need to issue an immediate written account of work carried out. The printer is powered by a rechargeable battery and comes complete with mains charger and RS232 Printer Lead. SP1000 Paper Replacement thermal paper for the SP1000 Mini Printer Fluke DMS software for 1650/6000 Series The Fluke DMS (Data Management Software) is an efficient program for administration and reporting of installation tests in compliance with EN 60364, DIN VDE 0100/0105, BS7671 17th edition wiring resulation and appliance tests in compliance with DIN VDE 0701/0702, ÖVE E 8701. DMS 0100/INST Software for Installation Tester Fluke 1653B and 1654B Supporting reports for Austria, Germany, UK, Switzerland, Netherlands DMS 0702/PAT Software for Portable Appliance Tester Fluke 6500 Supporting reports for Austria, Germany, UK, Netherlands DMS COMPL PROF Software for the Fluke 1654B, 1653B and Fluke 6500 Supporting reports for Austria, Germany, UK, Switzerland, Netherlands EXTL100-02 (Schuko plug)EXTL100-02 (UK plug) MTC77MTC1363 Accessories for Fluke 1650 Series Installation Testers Accessories for Fluke 6500 Series Portable Appliance Testers
- 51. 49 For troubleshooting systems where temperature is a critical symptom, our digital thermometers provide you with laboratory accuracy wherever you need it. We offer a choice of non-contact, laser-guided infrared thermometers for safely getting at hard-to-reach, electrically live or particularly hot targets, and contact thermometers with a full range of thermocouple probes. Digital Thermometers
- 53. 51 570 Series Precision Infrared Thermometers 572 574 Temperature range -30 to 900ºC Optical resolution Standard: 60:1 Close focus: 50:1 3 dot laser beam for accurate targeting Adjustable emissivity Bar graph display Backlit LCD display Use selectable ºC or ºF Audible and visible Hi/Lo Alarm /- / MIN/MAX AVG/DIF readings Datalogging (number of measurements) 100 PC interface RS232 572 574 Temperature range -30 to 900°C Response time 250ms (95 % of reading) Resolution 0.1°C of reading up to 900°C Repeatability ±0.5% of reading or ±1°C* Accuracy: (assumes ambient operating temperature of 23 ºC to 25 ºC ) ±0.75% of reading, ±0.75°C * Typical distance to target 10,5 m Emissivity Digitally adjustable from 0.10 to 1.0 by 0.01 *whichever is greater. Features Included Accessories Fluke 572: Hard case, 2 batteries Fluke 574: Hard case, 2 batteries,Thermocouple K probe, 220V power supply, IRGraph software, RS232 cable Ordering Information Fluke 572 Precision Infrared Thermometer Fluke 574 Precision Infrared Thermometer Fluke 572CF Precision Infrared Thermometer with close focus option Fluke 574CF Precision Infrared Thermometer with close focus option The Fluke 570 series are the most advanced IR non-contact thermometers, and are ideal for predictive and preventative maintenance applications. Offering a broad temperature range and a true dimension laser sighting system for precise targeting resulting in more accurate measurements. When requiring analysis and documentation use the 100-point data logging and software for graphing and analysis. From close-up electrical connections, to far-distance room balancing checks, the Fluke 570 series can take IR temperature measurements with ease and precision. • Enhanced optics allows measurements of smaller objects from farther away • True Dimension™ three-dot laser sighting system highlights the true diameter of measurement spots at all distances • Adjustable emissivity setting and 30 pre-set common material values for more accurate measurements • 100 data point memory for storage of measurements (Fluke 574). Specifications Battery Life: 10 hours typical Weight: 0.480 kg Size (HxWxD): 200 mm x 170 mm x 55 mm Two years warranty AN5 Analog data cable Recommended Accessories Measure temperature with ease and precision Fluke 572 Fluke 574
- 54. 52 61 62 63 Range - 18 to 275ºC - 30 to 500 ºC - 32 to 535 ºC Response time < 500ms < 500ms (95 % of reading) ≤ 0.5 second Resolution 0.2 ºC 0.2 ºC 0.2 ºC Repeatability (% of reading) ± 2% or ± 2 ºC* ± 0.5% or < ± 1 ºC* ± 0.5% or ≤ ± 1 ºC* Accuracy: (assumes ambient operating temperature of 23ºC) For targets at: -18 to -1ºC: ± 3ºC -1 to 275ºC: ± 2% of reading or ± 2ºC For targets at: 10 °C to 30 °C: ±1 °C ± 1.5% of reading or ± 1.5°C whichever is greater over the balance of the range For targets at: -32 to -26°C: ± 3°C -26 to -18°C: ± 2.5°C -18 to 23°C: ± 2°C 23°C -510°C: ± 1% of reading or ± 1°C* For targets above 510°C: ± 1.5% of reading Typical distance to target Up to 1m Up to 1.5 m Up to 2 m Emissivity Fixed at 0.95 Pre-set to 0.95 Fixed at 0.95 61 62 63 Form factor Flat grip Pistol grip Pistol grip Temperature range -18 to 275°C -30 to 500 °C -32 to 535°C Optical resolution 8:1 10:1 12:1 Laser beam for accurate targeting Backlit LCD display Use selectable °C or °F Min/max/avg/dif readings Max Max 60 Series Infrared Thermometers Battery Life: Fluke 63: 10 hours with laser and backlight on Fluke 62: 12 hours with laser and backlight on Fluke 61: 12 hours with laser and backlight on Size (HxWxD): Fluke 63: 200 mm x 160 mm x 55 mm Fluke 62: 152 mm x 101 mm x 38 mm Fluke 61: 184 mm x 45 mm x 38 mm Weight: Fluke 63: 0.320 kg Fluke 62: 0.200 kg Fluke 61: 0.227 kg Fluke 62: 2 years warranty Other models: one year warranty * whichever is greater Included Accessories Fluke 61: 9V Battery Fluke 62: 9V Battery, storage holster Fluke 63: Hard carrying case, 9V batteries Ordering information Fluke 61 Infrared Thermometer Fluke 62 Mini Infrared Thermometer Fluke 63 Infrared Thermometer Fluke 62/322/1AC-E (see page 5) Fluke T5-600/62/1AC (see page 5) Fluke FP FoodProTM Food Safety Thermometer Fluke FP Plus FoodProTM Plus Food Safety Thermometer The Fluke 60 Series non-contact thermometers are the ideal professional diagnostic tools for quick and accurate temperature measurements. These handheld tools are ideal for measuring surface temperatures of rotating, hard-to-reach, electricity live or dangerously hot targets like electrical motors and – panels, and heating and ventilation systems. The laser sighting system guides measurements to the right target and in less than a second, the large temperature display provides a readout of the surface temperature. The 60 Series IR thermometers feature: • Laser guided sighting system for easy targeting with 1% accuracy • Up to 12:1 optical resolution • Backlit display for easy reading in the dark • Temperatures up to 535°C The Fluke FoodPro™ thermometer series provide advanced temperature measurement solutions for the foodservice industry. Check the Fluke web for more information. Features Specifications H6 See page 131 Recommended Accessories C23 See page 130Fluke 62/322 kit T5-600/62/1AC-E Point, press and read temperature Kits Fluke 63 Fluke 62 Fluke 61
- 55. 53 566 and 568 Multipurpose Thermometers Fluke 566 Fluke 568 The Fluke 566 and included accessories Specifications Power: 2 AA/LR6 Batteries (566); 2 AA/LR6 Batteries and USB for use with a PC (568) Battery life: Used continuously; laser and backlight on: 12 hours; laser and backlight off: 100 hours Weight: 0.965 kg (566); 1.026 kg (568) Size (HxLxW): 25.4 cm x 19.1 cm x 6.9 cm Operating temperature: 0 °C to 50 °C Storage temperature: -20 °C to 60 °C Two years warranty Included accessories FlukeView® Forms software (568 only), USB cable (568 only), K-type thermocouple bead probe, 2 AA batteries, hard carrying case, quick start guide, and users manual. Ordering information Fluke 566 Infrared thermometer Fluke 568 Infrared thermometer With a straight-forward, menu-driven user interface and graphical display, the Fluke 566 and 568 multipurpose thermometers make even complex temperature measurements easy. Quickly navigate and adjust emissivity, start data logging, or turn on and off alarms, with just a few pushes of a button. For added convenience, both rugged handheld thermometers combine contact and non-contact temperature measurement capability, providing a total temperature measurement solution for any service and maintenance program. • Easily access advanced features with the soft-key buttons and graphical display • Measure smaller targets from farther away using the IR thermometer • Adjustable emissivity and built-in table of common materials for higher IR accuracy • Quickly identify problems with the MIN, MAX, AVG, and DIF functions • 2-color flashing alarm alerts you visually when measurements exceed limits • Includes Type K thermocouple bead probe • Compatible with all standard mini- connector K-type thermocouples • Data logging with a date/time stamp • Soft rubber boot for increased ruggedness • User interface available in 6 languages Choose your language Select the measurement surface See complete measurement details in seconds (Check the Fluke web for detailed specifications) The Fluke 568 and included accessories 566 568 Infrared temperature range -40 °C to 650 °C -40 °C to 800 °C Infrared accuracy < 0 °C : ± (1.0 °C + 0.1°/1 °C); > 0 °C : ± 1 % or ± 1.0 °C, whichever is greater Display resolution 0.1 °C Infrared spectral response 8 μm to 14 μm Infrared response time < 500 msec Input temperature range -270 °C to 1372 °C Input accuracy -270 °C to -40 °C: ± (1 °C + 0.2 °/1 °C) -40 °C to 1372 °C: ± 1 % or 1 °C, whichever is greater D:S (Distance to measurement spot size) 30:1 50:1 Laser sighting Single-point laser < 1 mw output Class 2 (II) operation, 630 nm to 670 nm Minimum spot size 19 mm Emissivity adjustment By built-in table of common materials or digitally adjustable from 0.10 to 1.00 by 0.01 Data logging with Date/Time stamp 20 points 99 points PC interface and cable None USB 2.0 with FlukeView® Forms software Hi/Low alarms Audible and two-color visual Min/Max/Avg/Dif Yes Display Dot matrix 98 x 96 pixels with function menus Backlight Two levels, normal and extra bright for darker environments Trigger Lock Yes Switchable between Celsius and Fahrenheit Yes 80PK-26 See page 128 Recommended Accessories 80PK-25 See page 128 80PK-11 See page 128 80PK-9 See page 128 80PK-8 See page 128 H6 See page 131 The two-in-one infrared and contact thermo- meter with an innovative graphical display
- 56. 54 561 Multipurpose Thermometer Fluke 561 The Fluke 561 includes everything you need for immediate inspections. Specifications Temperature range -40° to 550°C Display resolution 0.1° of reading D:S (Distance to spot size) 12:1 Easy emissivity selector Adjustable with three settings: low (0.3), medium (0.7), high (0.95) Display accuracy (Assumes ambient operating temperature of 23° to 25°C) ± 1.0% of reading or ± 1°C, whichever is greater; below 0°C, ± 1°C, ± 1°/1° Response time 500 mSec (95% or reading) Repeatability ± 0.5% of reading or ± 1°C, whichever is greater Spectral focus 8 μm to 14 μm Laser sighting Single-point laser Laser shutoff Laser turns off above ambient temperature of 40°C Laser power Class 2 (II) operation; output ‹ 1 mW, wavelength 630 nm to 670 nm Relative humidity 10% to 90% RH non-condensing, at < 30°C Power 2 AA batteries (alkaline or NiCD) Display hold 7 seconds Backlit display Yes, LCD with dual temperatures (current and MAX/MIN/DIF/KTC), low battery, F/C indicator, and Scan/Hold options Operating temperature 0° to 50°C Storage temperature -20 to 65°C MAX, MIN, DIF temperatures Yes Thermocouple type K mini-adapter input Yes, compatible with industry standard type K probes with mini-connector Thermocouple type K Velcro pipe probe Yes, with a temperature range of 0° to 100°C and accuracy of ± 2.2°C Measurement guide Yes Battery Life (alkaline): 12 hours Size (HxLxW): 176,9 mm x 163,6 mm x 51,8 mm Weight: 340 grams Two years warranty Included accessories Thermocouple K-type Velcro pipe probe, hand carrying case, 2 AA batteries and user manual with measurement guide. Ordering information Fluke 561 HVACPro Thermometer The Fluke 561 combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both IR and contact temperature, replacing several other test tools. It’s fast, efficient, and easy to use, saving you valuable time and effort. With the Fluke 561, you can take contact and ambient temperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized, and hard-to- reach objects instantly. Check motors, insulation, breakers, radiant heating, pipes, corroded connections, and wires. Plus, scan ducts, and other hard-to-reach objects from the floor—leave your ladder in the truck. You can use the Fluke 561’s handy Velcro® pipe probe or, plug in any industry standard, K-type mini-connector thermocouple probe you already own. • IR thermometer for quick measurements up close or at a distance • Single-point laser sighting • Easy emissivity adjustment for measuring pipes and ducts more accurately • Includes a Velcro pipe probe for super- heat and sub-cooling as well as other surface contact measurements • Also compatible with all standard mini- connector K-type thermocouples • MIN, MAX and DIF temperature readings • Lightweight (only 340 grams) and portable • Includes measurement guide 80PK-8 See page 128 80PK-25 See page 128 Recommended Accessories 80-PK-1 See page 128 H6 Se page 131 Combined Infrared and Contact Thermometer
- 57. 55 50 Series II Thermometers FVF-SC 2 See page 132 TPAK See page 132 Recommended Accessories Fluke 54 II B Fluke 51 II Features 80PK-25 See page 128 Battery life: 1000 hours typical, AA Size (HxWxD): 173 x 86 x 38 mm Weight: 0.4 kg Three Year Warranty Included Accessories Impact absorbing holster Two bead probe thermocouples 80PK-1 (54+52) One bead probe thermocouple 80PK-1 (51+53) Ordering Information Fluke 51 II Thermometer Fluke 52 II Thermometer Fluke 53 II B Thermometer Fluke 54 II B Thermometer FVF-SC2 FlukeView Forms Software including USB interface cable The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged handheld test tool. • Large backlit dual display shows any combination of T1 , T2 (52 and 54 only), T1 -T2 (52 and 54 only) plus MIN, MAX, or AVG • Relative time clock on MIN, MAX, and AVG provides a time reference for major events • Electronic Offset function allows compensation of thermocouple errors to maximize overall accuracy • Readout in °C, °F, or Kelvin (K) • Sleep mode increases battery life • Battery door allows easy battery replacement without breaking the calibration seal Additional features for the 53 and 54 Series II: • Data Logging up to 500 points of data with user adjustable recording interval • Real time clock captures the exact time of day when events occur • Recall function allows logged data to be easily reviewed on the meter display • IR communication port allows data to be exported to optional FlukeView® PC software 51 II 52 II 53 II B 54 II B Thermocouple types J,K,T,E J,K,T,E J,K,T,E,N,R,S J,K,T,E,N,R,S Number of inputs Single Dual Single Dual Time stamp Relative Time Relative Time Time of Day Time of Day Splash/Dust resistant Dual display with backlight Min/Max/Avg recording (T1 -T2 ) True differential Data logging up to 500 points IR data port for interface to PC Compatible with optional FlukeView Software 80PK-26 See page 128 Fluke 52 II Fluke 53 II B Specifications C25 See page 130 **Only the Fluke Models 53 and 54 Series II thermometers are capable of measuring N, R, and S-type Temperature range: J-type Thermocouples -210°C to 1200°C K-type Thermocouples -200°C to 1372°C T-type Thermocouples -250°C to 400°C E-type Thermocouples -150°C to 1000°C N-type** Thermocouples -200°C to 1300°C R** and S-type** Thermocouples 0°C to 1767°C Temperature accuracy Above –100°C (-148°F): J, K, T, E, and N-type** ± [ 0.05% + 0.3°C ] R** and S-type** ± [ 0.05% + 0.4°C ] Below –100°C (-148°F): J, K, E, and N-types ± [ 0.20% + 0.3°C ] T-type ± [ 0.50% + 0.3°C ] Laboratory accuracy. Wherever you go.
- 58. 56 1523 and 1524 Reference Thermometers 2384P and 2384T Spare INFO-CON Adapters 2373-LTC Universal TC adapter Recommended Accessories Fluke 1524 Features FLK80P3 (80PK-3A with universal thermocouple adapter) Battery life (alkaline): 20 hours Power supply: Universal 12 Vdc Size (HxWxD): 200 x 96 x 47 mm Weight: 0.65 kg Warranty: 1 year Measure, graph and record three sensor types with one tool. The Fluke 1523/24 Reference Thermometer deliver high accuracy, wide measurement range, logging, and trending, all in a handheld tool you can take anywhere. For top accuracy, a memory chip inside the probe connector feeds probe calibration information to the readout. In addition, any thermocouple with a mini-thermocouple connector can be read using the optional universal thermocouple adapter. Choose the 1523 for single channel or the 1524 for dual channel measurement. Three sensor types • PRTs: –200 °C to 1000 °C • Thermocouples –200 °C to 2315 °C • Precision thermistors: –50 °C to 150 °C High accuracy • PRTs: ±0.011 °C • Thermocouples: ±0.24 °C for J,K,L,M • Precision thermistors: ±0.002 °C Fast measurement • PRTs: up to 0.45 seconds/sample • Thermocouples: up to 0.3 seconds/ sample • Precision thermistors: up to 0.3 seconds/sample Two models • 1523: Single channel standard model; memory for 25 readings & statistics • 1524: Two channels; memory for 25 readings and statistics plus logging 15,000 measurements; real-time clock for time and date stamps 1523 1524 Sensor Types PRT & RTD, Thermistor, and Thermocouple Thermocouple Types B,C,E,J,K,L,M,N,R,S,T,U Number of inputs Single Dual Data trending (graphing) Graphical display with backlight Min/Max/Avg/Standard deviation recording High speed measurement RS-232 PC communications T1-T2 True differential Data logging up to 15,000 points Time and date stamp FLK80P1 (80PK1 with universal thermocouple adapter) Fluke 1523 Specifications TPAK Temperature range Thermocouple –200 °C to 2315 °C PRT & RTD –200 °C to 1000 °C Thermistor –50 °C to 150 °C Resolution and best accuracy Thermocouple 0.01 °, ±0.24 °C PRT & RTD 0.001 °, ±0.011 °C Thermistor 0.001 °, ±0.002 °C Operating temperature –10 °C to 60 °C Storage temperature –20 °C to 70 °C A new standard in accuracy and versatility. Included Accessories NIST traceable certificate of calibration, users guide, CD-ROM (contains technical manual), 12 V dc universal power supply, RS-232 cable, 9940 I/O ToolKit software Ordering Information Fluke 1523* Reference Thermometer Fluke 1524* Reference Thermometer Fluke 1523-P1 Reference Thermometer, PRT(–200 °C to 420 °C, 6.35 mm x 298 mm), Universal Thermocouple Adapter, TPAK, and Case Fluke 1524-P1 Reference Thermometer, PRT(–200 °C to 420 °C, 6.35 mm x 298 mm), Universal Thermocouple Adapter, TPAK, and Case * Requires an optional probe Optional Accessories 2384-P INFO-CON Connector, PRT (Gray Cap), Spare 2384-T INFO-CON Connector, Thermocouple (Blue Cap), Spare 2373-LPRT RTD Adapter, Lemo to Mini Grabbers (4-wire) Optional probes: 5616-12-P PRT, 6.35 mm x 298 mm, –200 °C to 420 °C 5615-9-P PRT, 4.76 mm x 229 mm, –200 °C to 420 °C 5610-9-P Thermistor, 3.2 mm x 229 mm, 0 °C to 100 °C (Check the Fluke web for detailed specifications) Note: The 1523/24 are pictured with probes connected which may be purchased seperately.
- 59. 57 1551A Ex 1552A Ex Temperature range –50 °C to 160 °C –80 °C to 300 °C Accuracy (1 year) ±0.05 °C Display units °C, °F Sensor type 100 Ω thin film RTD 100 Ω wire-wound PRT Probe temperature coefficient 0.00385 Ω/Ω/°C nominal Sensor length ≤ 10 mm ≤ 30 mm Sensor position (from sheath tip) 3 mm Minimum immersion depth1 70 mm 120 mm Probe sheath material SST Response time 4.8 mm diameter probe (3/16 in): 14 seconds 6.35 mm diameter probe (1/4 in): 21 seconds Probe hysteresis ±0.01 °C Temperature resolution Selectable: 0.1, 0.01, 0.001 (default 0.01) Sample rate Selectable: 0.5, 1, 2, seconds (default 1) Operating temperature range of readout –10 to 50 °C Storage temperature –20 °C to 60 °C , 0 to 95% RH, non-condensing Optional data logging2 Up to 10k time-stamped readings stored to internal memory Logging intervals2 2, 5, 10, 30, or 60 seconds; 2, 5, 10, 30, or 60 minutes Averaging Moving average of most recent 2 to 10 readings, user selectable (ON/OFF, 2,5,10) Communications RS-232 stereo jack (access calibration parameters only) EMC compliance EN61326:2006 Annex C; CISPR II, Edition 5.0-2009; Class “B” Enclosure rating IP50 Calibration NVLAP accredited, NIST Traceable System Calibration Characterization CVD ITS-90 1 Per ASTM E 644 2 See ordering information for optional data logging configurations 1551A Ex / 1552A Ex Intrinsically Safe “Stik” Thermometers Included Accessories NVLAP –accredited report of calibration, user’s guide on CD-ROM, 3 AAA batteries Ordering Information 1551A-9 “Stik”Thermometer 1551A-12 “Stik”Thermometer 1551A-20 “Stik”Thermometer 1551A-9-DL “Stik”Thermometer with datalogging 1551A-12-DL “Stik”Thermometer with datalogging 1551A-20-DL “Stik”Thermometer with datalogging 1552A-12 “Stik”Thermometer 1552A-12-DL “Stik”Thermometer with datalogging Note: Model number appended with a -9, -12, -20 indicates probe sheath length in inches.All probe diameters are 6.35 mm with the exception of the 1551A-9, which is 4.8 mm diameter Finally, a digital substitute for your mercury-in-glass thermometers! Highly accurate and durable, the Fluke 1551A Ex/1552A Ex “Stik”Thermometer is soon to become the new “gold standard” of industrial temperature calibration. Whether working outdoors in environments where potentially explosive gases may be present or on the floor of a processing plant, the intrinsically safe, battery-operated, portable reference thermometer is designed to go where you work. The RTD sensor of the “Stik”Thermometer is housed in a rugged stainless steel sheath—you no longer have to worry about breaking a mercury-in-glass thermometer and the subsequent cleanup. The probe and digital readout are fixed together, calibrated as a system, and accurate to ± 0.05 °C over the full temperature range. The large backlit LCD display rotates 90° making it easy to read from any position. Minimize measurement errors with the user- configurable temperature trend/stability indicator which tells you when your temperature source is stable or if your temperature is trending up or down. • ± 0.05 °C accuracy over full range • Intrinsically safe (ATEX compliant) • Display temperature in °C or °F • Optional data logging to internal memory • Temperature trend indicator • User selectable resolution (0.1, 0.01, 0.001) • 300 hour battery life • Percent battery-life and low battery indicator • NVLAP accredited calibration (NIST traceable) Battery Life: 300 hours typical without LCD, 3 AAA Size (HxWxD): 114 x 57 x 25 mm Weight: 196 grams Warranty: 1 year Specifications The new “gold standard” of industrial temperature calibration 1552A Ex 1551A Ex 1551-CASE Carrying case 1551-CBL RS-232 cable Recommended Accessories New
- 60. 5858 Temperature changes can indicate problems in many everyday applications and a thermal imager makes it quick and easy to visually check surface temperatures. Often problems can be discovered before contact measurements even need to be made. Fluke offers a complete range of handheld thermal imagers for both industrial and building diagnostic applications. Models are available for any budget. Thermal Imagers
- 61. 59 Ti Series Thermal Imagers Overheating bearing cap See things both ways - Infrared and visual (visible light) images fused together communicating critical information faster and easier – traditional infrared images are no longer enough. Patented IR-Fusion® Technology, only available from Fluke, simultaneously captures a digital photo and the infrared image and fuses them together taking the mystery out of IR image analysis. Three-phase switch-gear load imbalance Overheated motor Cool corner in a building SmartView® Software Fluke SmartView® software is included with each Fluke Thermal Imager. This powerful software is a modular suite of tools that annotates, views, edits and analyzes IR images. It also generates fully customizable and professional- looking reports in a few easy steps. The IR-Fusion technology is fully supported. FREE webinars/webcasts on Thermal Imaging Keep up-to-date on the latest troubleshooting techniques. Attend a FREE Fluke webinar (web-based seminar) about thermal imaging applications. Go to the Fluke website for more information. Picture-in-Picture Alpha BlendingFull IR Full Visible Light Find it, fix it, fast! Temperature changes can indicate problems in many areas you see everyday, some include: • Inside electrical distribution and service (Switch gear, panels, controls, fuses,transformers, receptacles, lighting, conductors, bus bars, motor control centers) • Motors, pumps and mechanical (Electric motors and generators, pumps, compressors, evaporators, bearings, couplings, gearboxes, gaskets/seals, belts, rollers, disconnects) • Process (Tanks and vessels, pipes, valves and traps, reactors, process insulation) • HVAC/R (air conditioning, heating, air handlers, refrigeration) • Outside electrical distribution - utilities (Transformers, bushings, insulators, transmission lines, other exterior conductors, service connections, disconnects, capacitor banks) IR/Visible Alarm IR-Fusion® Technology: Infrared and visual images fused together in one image
- 62. 60 Ti32/Ti29/Ti27 Industrial/ Commercial Thermal Imagers Designed for industrial and commercial environments, the Fluke P3 Series of thermal imagers deliver superior image quality, versatility, and affordability without compromise. They also boast superior infrared resolution, industry leading spatial resolution, and a high definition display creating the sharpest images in their price classes. Finding a potential problem before it becomes a costly disaster shows you just how much a Fluke thermal imager can save you in time, money and even lifes. The New P3 Series from Fluke • Delivers the clear, crisp images needed to find problems fast with up to 320 x 240 sensor. • Identify even the smallest temperature differences that could indicate problems with industry-leading thermal sensitivity (NETD), down to 45 mK. • Automatic alignment (parallax correction) of visual and infrared images with Fluke patented IR-Fusion® . • Optional telephoto and wide angle lenses available for added versatility and special applications (easily installable in the field). Superior image quality • Field replaceable batteries give you maximum flexibility no matter where your work takes you. • Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb. • No need to carry pen and paper—record findings by speaking into the imager. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference. • One-handed focus capability, emissivity correction, reflected background temperature compensation, and transmission correction increase the accuracy of measurements in most situations. • Adjustable hand strap for left-or right-handed use. • Everything needed to get started is included. Easy to use • Optimized for field use in challenging work environments. • Engineered and tested to withstand a 2 m drop for the ultimate peace of mind. • Withstands dust and water—tested to an IP54 rating. • With their rugged design, integrated lens cover, protected display and 2 meter drop test, they are designed to handle the harshest environments. Rugged New New Fluke Ti32 Fluke Ti29 Fluke Ti27
- 63. 61 Ti32/Ti29/Ti27 Industrial/ Commercial Thermal Imagers Specifications Water and dust resistant: IP54 Size (HxWxD): 277 x 122 x 170 mm Weight: 1.05 kg Two Years Warranty Fluke Ti27 Fluke Ti29 Fluke Ti32 Thermal imaging performance Detector type 240 x 180 Focal Plane Array, uncooled microbolometer 280 x 210 Focal Plane Array, uncooled microbolometer 320 x 240 Focal Plane Array, uncooled microbolometer Field of view (FOV) 23 º horizontal x 17 º vertical Spatial resolution (IFOV) 1.67 mRad 1.49 mRad 1.25 mRad Min focus distance 15 cm Thermal sensitivity (NETD) ≤0.05 °C at 30 °C (50 mK) ≤0.045 °C at 30 °C (45 mK) Minimum span (auto/manual) 2.5 °C / 5 °C Focus Manual Optional telephot infrared lens type Field of view (FOV) 11.5” x 8.7” Minimum focus distance 45 cm Optional wide-angle infrared lens type Field of view (FOV) 46” x 34” Minimum focus distance 7.5 cm Visual imaging performance Minimum focus distance 46 cm On camera operating modes Picture-in-Picture and full screen IR plus Blending Color Alarm High temperature alarm Visible light camera 2.0 MegaPixel Temperature measurement Temperature range -20 °C to 600 °C Accuracy ±2 °C or 2% Measurement modes Center point and hot and cold markers Image presentation Digital display 9.1 cm (3.7”) landscape color VGA (640x480) LCD LCD backlight Selectable bright or auto Palettes Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted Ultra Contrast Palettes Voice Annotation Voice annotation Image and data storage Storage medium 2GB SD Card (3000 .bmp IR images/1200 .IS2 images) File formats supported JPG, JPEG, JPE, JFIF, BMP, GIF, DIB, PNG, TIF, and TIFF Controls and adjustments Set-up controls Date/time, Cº/ºF, language On screen emissivity correction On-screen reflected background temperature compensation On-screen transmission correction Language selection Eng, ger, fre, spa, por, ita, swe, fin, rus, cze, pol, tur Image controls Smooth auto scaling and manual scaling Power Battery type Two replaceable rechargeable battery packs (Lithium ion) Battery operating time 4+ hours per battery pack FLK-LENS/TELE1 Telephoto Infrared Lens FLK/LENS/WIDE Wide-angle Infrared Lens FLK-TI-SPB3 Extra battery FLK-TI-SBC3 Charging base Ti-Car Charger Car charger Recommended Accessories Included Accessories SmartView® software 2 GB SD card SD card reader Rugged hard carrying case Soft carrying case Hand strap Rechargeable battery (extra) AC charger/power supply User manual Ordering Information Fluke Ti27 Thermal Imager Fluke Ti29 Thermal Imager Fluke Ti32 Thermal Imager Complete package
- 64. 62 TiR32/TiR29/TiR27 Building Diagnostic Thermal Imagers Designed specifically for the building inspection professional, the Fluke P3 Series of thermal imagers deliver the perfect balance between performance and price. They also boast superior infrared resolution, spatial resolution, and high definition displays. The P3 Series delivers crisp images and impressive reports with the included professional SmartView® software. Whether you’re searching for energy waste, leaky roofs or moisture problems, Fluke P3 thermal imagers offer tested and proven technology that takes the guesswork out of finding problems and provides solutions. The New P3 Series from Fluke • Delivers the clear, crisp images needed to find problems fast • Identify even the smallest temperature differences that could indicate problems with industry-leading thermal sensitivity (NETD), down to 40 mK. • Automatic alignment (parallax correction) of visual and infrared images with Fluke patented IR-Fusion® • Optional telephoto and wide angle lenses available for added versatility and special applications (easily installable in the field). Superior image quality • Field replaceable batteries give you maximum flexibility no matter where your work takes you. • Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb. • No need to carry pen and paper—record findings by speaking into the imager. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference. • One-handed focus capability, emissivity correction, reflected background temperature compensation, and transmission correction increase the accuracy of measurements in most situations. • Adjustable hand strap for left-or right-handed use. • Everything needed to get started is included. Easy to use • Optimized for field use in challenging work environments. • Engineered and tested to withstand a 2 m drop for the ultimate peace of mind. • Withstands dust and water—tested to an IP54 rating. • With their rugged body, integrated lens cover, protected display and 2 meter drop test, they are designed to handle the harshest environments. Rugged Fluke TiR32 Fluke TiR29 Fluke TiR27 New New
- 65. 63 TiR32/TiR29/TiR27 Building Diagnostic Thermal Imagers Recommended Accessories FLK-TI-SPB3 Extra battery FLK-TI-SBC3 Charging base Ti-Car Charger Car charger Included Accessories SmartView® software 2 GB SD card SD card reader Rugged hard carrying case Soft carrying case Hand strap Rechargeable battery (extra) AC charger/power supply User manual Ordering Information Fluke TiR27 Thermal Imager for Building Diagnostics Fluke TiR29 Thermal Imager for Building Diagnostics Fluke TiR32 Thermal Imager for Building Diagnostics Water and dust resistant: IP54 Size (HxWxD): 277 x 122 x 170 mm Weight: 1.05 kg Two Years Warranty Complete package Specifications Fluke TiR27 Fluke TiR29 Fluke TiR32 Thermal imaging performance Detector type 240 x 180 Focal Plane Array, uncooled microbolometer 280 x 210 Focal Plane Array, uncooled microbolometer 320 x 240 Focal Plane Array, uncooled microbolometer Field of view (FOV) 23 º horizontal x 17 º vertical Spatial resolution (IFOV) 1.67 mRad 1.49 mRad 1.25 mRad Min focus distance 15 cm Thermal sensitivity (NETD) ≤0.045 °C at 30 °C (50 mK) ≤0.040 °C at 30 °C (40 mK) Minimum span (auto/manual) 2.5 °C / 5 °C Focus Manual Optional telephot infrared lens type Field of view (FOV) 11.5” x 8.7” Minimum focus distance 45 cm Optional wide-angle infrared lens type Field of view (FOV) 46” x 34” Minimum focus distance 7.5 cm Visual imaging performance Minimum focus distance 46 cm On camera operating modes Picture-in-Picture and full screen IR plus Blending Color Alarm Dewpoint alarm Visible light camera 2.0 MegaPixel Temperature measurement Temperature range -20 °C to 150 °C Accuracy ±2 °C or 2% Measurement modes Center point and hot and cold markers Image presentation Digital display 9.1 cm (3.7”) landscape color VGA (640x480) LCD LCD backlight Selectable bright or auto Palettes Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted Ultra Contrast Palettes Voice Annotation Voice annotation Image and data storage Storage medium 2GB SD Card (3000 .bmp IR images/1200 .IS2 images) File formats supported JPG, JPEG, JPE, JFIF, BMP, GIF, DIB, PNG, TIF, and TIFF Controls and adjustments Set-up controls Date/time, Cº/ºF, language On screen emissivity correction On-screen reflected background temperature compensation On-screen transmission correction Language selection Eng, ger, fre, spa, por, ita, swe, fin, rus, cze, pol, tur Image controls Smooth auto scaling and manual scaling Power Battery type Two replaceable rechargeable battery packs (Lithium ion) Battery operating time 4+ hours per battery pack FLK-LENS/TELE1 Telephoto Infrared Lens FLK/LENS/WIDE Wide-angle Infrared Lens
- 66. 64 Ti125/Ti110/Ti100 Industrial / Commercial Thermal Imagers Ti125 Ti110 Ti100 New Industrial and commercial maintenance made easy Technology isn’t working for you if it’s slowing you down. Fluke proudly introduces five new thermal imagers specifically designed to help you do more in less time, while being at home in the harshest of environments. A project that might normally take an hour can now be done in minutes. Our newest imagers are the lightest, most rugged, easiest-to-use professional imagers you can buy. IR-OptiFlex™ focus system Discover issues significantly faster with Fluke’s revolutionary, ultra-rugged focus system. The IR-OptiFlex focus system gives you optimum focus by combining focus-free ease-of-use with the flexibility of manual focus on the same camera! IR-Fusion® technology Enjoy the industry’s best point-and-shoot IR-Fusion camera. Fluke patented technology blends digital and infrared images into a single image to precisely document problem areas. Rugged one-hand operation Experience the most rugged and reliable, lightweight professional camera around. One-touch focus, laser pointer, and torch. Point-and-shoot simplicity. No one builds more rugged, ergonomic tools than Fluke. Multi-mode video recording Troubleshoot with the industry’s only thermal imager that records focus-free video in visible light and infrared with full IR-Fusion capabilities. Monitor processes over time, easily create infrared video reports, and troubleshoot. IR-PhotoNotes™ annotation system Get an exact reference to your problem area by capturing up to three digital photos per file. Add images of equipment, motor nameplates, workroom doors or any other useful or critical information. Electronic compass Make sure you and others know the location of the problem. Compass readings easily appear in images and reports.
- 67. 65 Ti125/Ti110/Ti100 Industrial / Commercial Thermal Imagers Recommended Accessories Included Accessories SmartView® software AC power adapter Lithium ion smart battery USB cable 2 GB SD memory card Hard carrying case Soft transport bag Adjustable hand strap User manual Two-bag charging base and multi-format USB memory card reader (Ti125 only) Ordering Information Fluke Ti125 Industrial-Commercial Thermal Imager Fluke Ti110 Industrial-Commercial Thermal Imager Fluke Ti100 General Use Thermal Imager Water and dust resistant: IP54 Size (HxWxD): 284 x 86 x 135 mm Weight: 0.726 kg Two Years Warranty Specifications Fluke Ti125 Fluke Ti110 Fluke Ti100 Industrial-Commercial General Thermal imaging performance IR resolution (FPA size) 160 x 120 FPA Uncooled Microbolometer Field of view (FOV) 22.5 °H x 31 °V Spatial resolution (IFOV) 3.39 mRad Thermal sensitivity (NETD) ≤ 0.10 °C at 30 °C target temp (100 mK) Minimum span in auto mode 5 °C Minimum span in manual mode 2.5 °C Minimum IR focus distance 15.25 cm (6 in) 1.2 m (4 ft) Focus mechanism IR-OptiFlex™ focus system Focus-free 1.2 m and beyond IR-Fusion® technology PIP, FULL IR, FULL VISIBLE, AutoBlend PIP, FULL IR, FULL VISIBLE No, full IR only Color alarms High temperature, low temperature, isotherm High temperature - Visual imaging performance Visible camera 2 megapixel industrial-grade n/a LCD display 3.5 inch diagonal (portrait format) Hot/Cold markers Yes - User definable spot markers Three on camera and in SmartView® in SmartView® only Centerbox (MIN/AVG/MAX) Yes - Level and span control Manual and auto IR-PhotoNotes™ annotation system Yes (3 images) - Laser pointer Yes Torch Yes - Electronic (cardinal) compass Yes - Emissivity correction Yes Transmission correction Yes - Video Multi-mode video output Streaming USB video output - Multi-mode video recording (standard AVI with MPEG encoding) Yes (AVI with MPEG encoding) - Multi-mode video recording (radiometric .IS3) Yes, radiometric .is3 for approx.. 2.5 to 5 minutes depending upon thermal scene - Temperature measurement Temperature measurement range (not calibrated below -10° C) -20 °C to +350 °C -20 °C to +250 °C Accuracy ± 2 °C or 2 % (at 25 °C nominal, whichever is greater) Image presentation Standard palettes Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot Metal, Ironbow, Amber, Inverted Amber Blue-Red, Ironbow, Grayscale, Amber Ultra Contrast™ palettes Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot Metal, Ironbow, Amber, Inverted Amber Blue-Red, Grayscale, Ironbow - Voice Annotation Voice annotation Yes (60 seconds) per image - Image and data storage Memory storage 2 GB SD memory card Power Battery (field-replaceable, rechargeable) Two One Battery life 4+ hours (each) (assumes 50% brightness of LCD) FLK-TI-SPB3 Extra battery FLK-TI-SBC3 Charging base Ti-Car Charger Car charger
- 68. 66 TiR125/TiR110/Ti100 Building Diagnostic Thermal Imagers New Building diagnostics made easy Technology isn’t working for you if it’s slowing you down. Fluke proudly introduces five new thermal imagers specifically designed to help you do more in less time, while being at home in the harshest of environments. A project that might normally take an hour can now be done in minutes. Our newest imagers are the lightest, most rugged, easiest-to-use professional imagers you can buy. IR-OptiFlex™ focus system Discover issues significantly faster with Fluke’s revolutionary, ultra-rugged focus system. The IR-OptiFlex focus system gives you optimum focus by combining focus-free ease-of-use with the flexibility of manual focus on the same camera! IR-Fusion® technology Enjoy the industry’s best point-and-shoot IR-Fusion camera. Fluke patented technology blends digital and infrared images into a single image to precisely document problem areas. Rugged one-hand operation Experience the most rugged and reliable, lightweight professional camera around. One-touch focus, laser pointer, and torch. Point-and-shoot simplicity. No one builds more rugged, ergonomic tools than Fluke. Multi-mode video recording Troubleshoot with the industry’s only thermal imager that records focus-free video in visible light and infrared with full IR-Fusion capabilities. Monitor processes over time, easily create infrared video reports, and troubleshoot. IR-PhotoNotes™ annotation system Always have references handy – IR-PhotoNotes™ annotation system – quickly identify and keep track of inspection locations by adding digital images of important information and surrounding areas (TiR110 and TiR125). Electronic compass Make sure you and others know the location of the problem. Compass readings easily appear in images and reports. TiR125 TiR110 Ti100
- 69. 67 Recommended Accessories Water and dust resistant: IP54 Size (HxWxD): 284 x 86 x 135 mm Weight: 0.726 kg Two Years Warranty Specifications FLK-TI-SPB3 Extra battery FLK-TI-SBC3 Charging base Ti-Car Charger Car charger TiR125/TiR110/Ti100 Building Diagnostic Thermal Imagers Fluke TiR125 Fluke TiR110 Fluke Ti100 Building diagnostics General Thermal imaging performance IR resolution (FPA size) 160 x 120 FPA Uncooled Microbolometer Field of view (FOV) 22.5 °H x 31 °V Spatial resolution (IFOV) 3.39 mRad Thermal sensitivity (NETD) ≤ 0.08 °C at 30 °C target temp (80 mK) ≤ 0.10 °C at 30 °C target temp (100 mK) Minimum span in auto mode 2.5 °C 5 °C Minimum span in manual mode 2.0 °C 2.5 °C Minimum IR focus distance 15.25 cm (6 in) 1.2 m (4 ft) Focus mechanism IR-OptiFlex™ focus system Focus-free 1.2 m and beyond IR-Fusion® technology PIP, FULL IR, FULL VISIBLE, AutoBlend PIP, FULL IR, FULL VISIBLE No, full IR only Color alarms High temperature, low temperature (dewpoint), and isotherm Low temperature (dewpoint) - Visual imaging performance Visible camera 2 megapixel industrial-grade n/a LCD display 3.5 inch diagonal (portrait format) Hot/Cold markers Yes - User definable spot markers Three on camera and in SmartView® in SmartView® only Centerbox (MIN/AVG/MAX) Yes - Level and span control Manual and auto IR-PhotoNotes™ annotation system Yes (3 images) - Laser pointer Yes Torch Yes - Electronic (cardinal) compass Yes - Emissivity correction Yes Transmission correction Yes - Video Multi-mode video output Streaming USB video output - Multi-mode video recording (standard AVI with MPEG encoding) Yes (AVI with MPEG encoding) - Multi-mode video recording (radiometric .IS3) Yes, radiometric .is3 for approx.. 2.5 to 5 minutes depending upon thermal scene - Temperature measurement Temperature measurement range (not calibrated below -10° C) -20 °C to +150 °C -20 °C to +250 °C Accuracy ± 2 °C or 2 % (at 25 °C nominal, whichever is greater) Image presentation Standard palettes Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot Metal, Ironbow, Amber, Inverted Amber Blue-Red, Ironbow, Grayscale, Amber Ultra Contrast™ palettes Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot Metal, Ironbow, Amber, Inverted Amber Blue-Red, Grayscale, Ironbow - Voice Annotation Voice annotation Yes (60 seconds) per image - Image and data storage Memory storage 2 GB SD memory card Power Battery (field-replaceable, rechargeable) Two One Battery life 4+ hours (each) (assumes 50% brightness of LCD) Included Accessories SmartView® software AC power adapter Lithium ion smart battery USB cable 2 GB SD memory card Hard carrying case Soft transport bag Adjustable hand strap User manual Two-bag charging base and multi-format USB memory card reader (Ti125 only) Ordering Information Fluke TiR125 Building Diagnostics Thermal Imager Fluke TiR110 Building Diagnostics Thermal Imager Fluke Ti100 General Use Thermal Imager
- 70. 68 Ti9/Ti10/Ti25 Thermal Imagers Get the full picture instantly with the Fluke Ti9/Ti10/Ti25 thermal imagers. Built for tough work environments, these fully radiometric imagers are ideal for detecting problems in a wide range of equipment including switchgear, motor control centers and lighting systems. • Delivers the clear images to find problems fast with its 160x120 sensor • Even the smallest details become visible with the large, widescreen full color LCD display • Optimized for field use in harsh work environments - Engineered and tested to withstand a 2 meter drop - Withstands dust and water – tested to an IP54 rating - Innovative protective lens cover protects the lens when not in use • Enhanced problem detection and analysis capabilities with patent pending IR-Fusion® Technology (Ti10 and Ti25) • Intuitive, three-button menu is easy to use ... simply navigate with the push of a thumb • Store more than 3.000 screen images (.bmp format) or 1.200 fully radiometric images (.IS2 format) on included 2 GB SD memory card See things both ways—infrared and visual (visible light) images fused together communicating critical information faster and easier—traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on Ti10 and Ti25 models. The Fluke Ti9 can be upgraded to a full Fluke Ti10 with IR-Fusion at a later time. Fluke Ti10 Fluke Ti9 The rugged and affordable tools for electricians and technicians IR-Fusion® Technology Fluke Ti25
- 71. 69 Ti9/Ti10/Ti25 Thermal Imagers Included Accessories SmartView® software 2 GB SD card SD card reader Rugged hard carrying case Soft carrying case Hand strap Rechargeable battery AC charger/power supply User manual Ordering Information Fluke Ti9 Electrical Thermal Imager Fluke Ti10 Electrical Thermal Imager Fluke Ti25 Industrial Thermal Imager Ti-Visor Sun Visor (for complete Ti Series) Ti-Car Charger Car charger Recommended Accessories Water and dust resistant: IP54 Size (HxWxD): Ti9/Ti10/Ti25: 267 x 127 x 152 mm Weight: Ti9/Ti10/Ti25: 1.2 kg Two Years Warranty Complete package Specifications Fluke Ti9 Fluke Ti10 Fluke Ti25 Thermal imaging performance Detector type 160 x 120 Focal Plane Array, uncooled microbolometer Field of view (FOV) 23 º horizontal x 17 º vertical Spatial resolution (IFOV) 2.5 mRad Min focus distance 15 cm Thermal sensitivity (NETD) ≤0.2 °C at 30 °C (200 mK) ≤0.13 °C at 30 °C (130 mK) ≤0.09 °C at 30 °C (90 mK) Minimum span (auto/manual) 10 ˚C / 5 ˚C 10 ˚C / 5 ˚C 2.5 °C / 5 °C Focus Manual Visual imaging performance Minimum focus distance 46 cm 46 cm On camera operating modes Picture-in-Picture and full screen IR plus Picture-in-Picture and full screen IR plus Blending Visible light camera 1.3 MegaPixel 1.3 MegaPixel Temperature measurement Temperature range -20 ˚C to 250 ˚C -20 ˚C to 250 ˚C -20 ˚C to 350 ˚C Accuracy ± 5 °C or 5% ± 2 °C or 2% ± 2 °C or 2% Measurement modes Center point Center point Center point and hot and cold markers Image presentation Digital display 9.1 cm (3.6”) landscape color VGA (640x480) LCD LCD backlight Selectable bright or auto Palettes Ironbow, blue-red, high contrast, grey Ironbow, blue-red, high contrast, grey, amber and hot metal Image and data storage Storage medium 2GB SD Card (3000 .bmp IR images/1200 .IS2 images) File formats supported JPG, JPEG, JPE, JFIF, BMP, GIF, DIB, PNG, TIF, and TIFF Controls and adjustments Set-up controls Date/time, Cº/ºF, language Date/time, Cº/ºF, language On screen emissivity correction On-screen reflected background temperature compensation Language selection Eng, ger, fre, spa, por, ita, swe, fin, rus, cze, pol, tur Image controls Smooth auto scaling and manual scaling Power Battery type Internal rechargeable battery NiMh (included) Battery operating time 3 to 4 hours continuous operation
- 72. 70 TiS/TiR/TiRx/TiR1 Thermal Imagers for Building Diagnostics The affordable rugged Fluke TiRx and TiR Thermal Imagers are workhorse tools for the demands of building envelope, restoration and remediation, inspection and roofing applications. Whether to perform energy audits, locate the origins of construction problem or to find roof leaks, the TiRx and TiR offer an economical solution for complete detection, analysis and documentation. • Delivers the clear images to find problems fast with its 160x120 sensor • Enhanced problem detection and analysis capabilities with patent pending IR-Fusion® Technology (TiR) • The Fluke TiRx can be upgraded to a full Fluke TiR with IR-Fusion at a later time. • NETD 90 mK The TiR1 Thermal Imager is the professional’s choice for building diagnostics. The Fluke TiR1 has all the features of the Fluke TiR, but with an NETD of 0.07ºC for the TiR1 to identify even small temperature differences that could indicate problems. • IR-Fusion® , full option (combines visible image with IR image in full screen or picture-in-picture views) • Voice recording; record findings by speaking into the camera. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference • NETD 70 mK Fluke TiR Fluke TiRx Optimized for energy audits, restoration and remediation The professional’s choice Fluke’s entry level thermal imager for quick, easy, and accurate problem identification and troubleshooting designed specifically for the building inspection professional. Whether you are a building inspector, plumber, roofer, electrician, energy auditor, HVAC, insulator, or windows installer the Fluke Thermal Imaging Scanner is the perfect tool to help you identify hidden building construction issues, find moisture intrusion, detect energy loss/missing insulation, and many basic electrical connection and load problems. Now Fluke quality, durability, and performance are available in a thermal imager engineered for the valueconscious building professional. The Fluke TiS Thermal Imaging Scanner is the top-performing imager in its price class. • Highest resolution (120x120) in price class • Only imager in price class with versatile, manual focus • Largest display size (3.7”) in price class. • Long battery life lasts ~4 hours • Rugged body engineered to withstand 2 m drop test • Easy to use—the TiS Thermal Imaging Scanner provides you with a basic, reliable solution for the building professional • NETD 100 mK Entry-level Thermal Imager Fluke TiR1 Fluke TiS New
- 73. 71 TiS/TiR/TiRx/TiR1 Thermal Imagers for Building Diagnostics Included Accessories SmartView® software 2 GB SD card SD card reader Rugged hard carrying case Soft carrying case Hand strap Rechargeable battery AC charger/power supply User manual Ordering Information Fluke TiS Thermal Imaging Scanner Fluke TiRx Inspector Thermal Imager Fluke TiR Thermal Imager for Building Diagnostics Fluike TiR1 Thermal Imager for Building Diagnostics Water and dust resistant: IP54 Size (HxWxD): 267 x 127 x 152 mm Weight: 1.2 kg Two Years Warranty Complete package Ti-Visor Sun Visor (for complete Ti Series) Ti-Car Charger Car charger Recommended Accessories Fluke TiS Fluke TiRx Fluke TiR Fluke TiR1 Thermal imaging performance Detector type 120 x 120 Focal Plane Array, uncooled microbolometer 160 x 120 Focal Plane Array, uncooled microbolometer Field of view (FOV) 17 º horizontal x 17 º vertical 23 º horizontal x 17 º vertical Spatial resolution (IFOV) 2.5 mRad Min focus distance 15 cm Thermal sensitivity (NETD) ≤0.1 °C at 30 °C (100 mK) ≤0.09 °C at 30 °C (90 mK) ≤0.07 °C at 30 °C (70 mK) Minimum span 5 ˚C (in auto mode) 2.5 ˚C / 5 ˚C (Auto/Manual) Focus Manual Visual imaging performance Minimum focus distance - 46 cm On camera operating modes - Picture-in-Picture and full screen IR Picture-in-Picture and full screen IR plus Blending Visible light camera 1.3 MegaPixel Temperature measurement Temperature range -20 ˚C to 100 ˚C -20 ˚C to 150 ˚C Accuracy ± 5 °C or 5% ± 2 °C or 2% Measurement modes Center point Center point and hot and cold markers Image presentation Digital display 9.1 cm (3.6”) landscape color VGA (640x480) LCD LCD backlight Selectable bright or auto Palettes Ironbow, blue-red, greyscale Ironbow, blue-red, high contrast, grey Ironbow, blue-red, high contrast, grey, amber and hot metal Image and data storage Storage medium 2GB SD Card (3000 .bmp IR images/1200 .IS2 images) File formats supported JPG, JPEG, JPE, JFIF, BMP, GIF, DIB, PNG, TIF, and TIFF Controls and adjustments Set-up controls Date/time, Cº/ºF, language Date/time, Cº/ºF, language On screen emissivity correction On-screen reflected background Language selection Eng, ger, fre, spa, por, ita, swe, fin, rus, cze, pol, tur Image controls Smooth auto-scaling and lock of level and span Smooth auto scaling and manual scaling Power Battery type Internal rechargeable battery NiMh (included) Battery operating time 3 to 4 hours continuous operation Specifications FLK-TI-SBC3 Charging base (Ti32)
- 74. 72 CRange IRWindows Included Accessories Installation CD, self-adhesive drilling template, security access key, warranty statement. Ordering Information FLK-075-CLKT 75mm C-Range IR Window, Kwik Twist FLK-100-CLKT 100mm C-Range IR Window, Kwik Twist IP-200-UK Window Installation Kit 220/240V Infrared windows mount into panel doors and covers for switchgear, transformers, bus bars and other live electrical equipment, allowing Infrared, Ultraviolet, Visual and IRfusion technologies to be used without exposing personnel to live equipment. All infrared windows from Fluke use the unique Quadraband™ multispectral optic, allowing inspection with any camera for total flexibility both now and in the future. • Reduce the arc flash risk associated with electrical thermography • Increase efficiency as thermographer can work alone without being accompanied by an electrician to isolate and open panels • Stay safety compliant with NFPA70E and other safety protocols and leave the panels closed • Extend the life of your equipment with more frequent IR scans • Easy to install • Durable enough to withstand extreme outdoor conditions yet practical for indoor applications as well. Specifications (Check the Fluke web for detailed specifications) Increase the safety and speed of electrical thermography FLK-075-CLKT FLK-100-CLKT Optic Data Crystal Insert Diameter 75 mm 100 mm Viewing Aperture Diameter 68 mm 89 mm Viewing Aperture Area 3632 mm2 6322 mm2 Thickness 2 mm 4 mm CLIRVU Coating Shortwave IR Capable Midwave IR Capable Longwave IR Capable Ultraviolet (UV) Capable Visual Capable Fusion Capable General Maximum Temperature Gaskets 250º C Body 659 º C Optic 1400º C Gaskets Low Smoke & Fume (LSF) compliant silicone IP rating IP65 NEMA rating Typo 3/12 (UL & CSA Third Party Certified) Vibration rating IEC60068-2-6 Humidity rating IEC60068-2-3 Pull out strength Up to 630 kg Warranty: Lifetime replacement against manufacturing defects
- 75. 73 The Fluke Laser Distance Meters bring you the most advanced measuring technology. Unlike ultrasonic distance meters with laser pointers, these meters use a precision narrow laser beam that can avoid the common errors caused by extraneous objects near measurement targets. Laser Distance Meters
- 76. 6574 421D, 416D, 411D Laser Distance Meters Included Accessories Two AAA batteries, Users manual on CD, Quick start guide, Nylon carrying case, Wrist wrap (421D) Ordering Information Fluke 411D Laser Distance Meter Fluke 416D Laser Distance Meter Fluke 421D Laser Distance Meter Professional-grade laser distance measuring tools that are fast, easy to use, and fit in your pocket. The Fluke laser distance meters bring you the most advanced measuring technology. These meters are fast, accurate, durable, and easy to use — just point and shoot. Their straightforward design and easy, one-button operation mean you spend less time measuring. Unlike ultrasonic distance meters with laser pointers, the Fluke 421D, 416D and 411D use a precision narrow laser beam that can avoid the common errors caused by extraneous objects near measurement targets. These compact and handy Fluke distance meters are designed for indoor, and limited outdoor applications. Addition, subtraction, area, and volume calculations could not be simpler. The extra bright laser is clearly visible so you can see your targeting point even if an object is hard-to-reach or distant. The Fluke 421D, 416D and 411D have a large LCD screen and buttons positioned for one- handed measurements. Features Operating temperature: 0°C to 40°C Storage temperature: -25°C to 70°C Operating altitude: up to 3500 m Battery Life: 411D: up to 3000 readings 416D, 421D: up to 5000 readings Size (HxWxD): 411D: 123 mm x 50 mm x 26 mm 416D: 135 mm x 46 mm x 31 mm 421D: 127 mm x 52 mm x 25 mm Weight: 411D: 0.150 kg 416D: 0.110 kg 421D: 0.125 kg Warranty: 2 years Fluke 416DFluke 411D 411D 416D 421D Reduction of estimation errors, saving both time and money Instant measurement with one-button operation Easy targeting with bright laser Quick calculation of area (square footage) and volume Easy addition and subtraction of measurements Improved battery life from automatic shut-off feature Pythagoras calculation for determining distance indirectly from two other measurements Pouch Ability to view more with large, 3-line display with backlight Ability to measure up to 30 m 60 m 100 m Storage capacity of measurements for quick recall of distance - 10 20 MIN/MAX function Enhanced Pythagoras calculation for determining distance indi- rectly from three other measurements Audible feedback of on and off modes Strong environment protection with IP54 (water spray & dust proof) sealing Audible feedback for taking room angle and incremental measurements ± 45° Tilt sensor for taking indirect measurements in hard to reach areas Tripod mode allows you to mount to a tripod for measuring long distances Built in light sensor for activating the backlight saving battery life Corner angle feature, allows you to determine the angle of a corner Fluke 411D Fluke 416D Fluke 421D Range (for extended distances, use a target plate) 30 m 60 m 100 m Accuracy ± 3 mm ± 1.5 mm ± 1.5 mm Measurement units 00.000 m 00.000 m 00.000 m Measurement storage 10 locations 20 locations Backlight Automatic power off After 180 seconds After 180 seconds After 360 seconds Specifications (Check the Fluke web for detailed specifications) 411D/62 Kit Combo kit includes: - Fluke 62 Mini IR Thermometer - Fluke 411D Laser Distance Meter - Soft pouch for each model Fluke 421D
- 77. 75 In response to the growing importance of air quality in buildings, workplaces and homes, Fluke offers you a range of tools that monitor temperature, humidity, air velocity, particulate, and carbon monoxide levels. These tools help you to quickly and easily troubleshoot and maintain indoor air quality, as well as to verify the efficient operation of heating, ventilation and air conditioning systems. Indoor Air Quality Tools
- 78. 76 975 AirMeter Operating temperature (CO and CO2 sensors): -20 °C to 50 °C Operating temperature (all other functions): -20 °C to 60 °C Storage temperature: -20 °C to 60 °C Humidity: 10% to 90% Altitude: Up to 2000 m 975VP AirMeter Velocity Probe Recommended Accessories Shock and vibration: MIL-PRF-28800F, Class 2 Battery: Rechargeable Li-Ion (primary), three- AA (backup) Weight: 0.544 kg Size (HxWxD): 28.7 cm x 11.43 cm x 5.08 cm Data logging: 25,000 records (continuous), 99 records (discrete) Multilanguage interface: English, French, Spanish, Portuguese and German Two-year warranty The Fluke 975 AirMeter combines five air monitoring tools into one, rugged and easy-to-use handheld tool. Use the Fluke 975 to verify the efficient operation of heating, ventilation and air conditioning systems, and test for dangerous carbon monoxide leaks in all types of buildings. • Simultaneously measures, logs, and displays temperature, humidity, CO2, and CO on a bright, backlit LCD display • One-touch air flow and velocity measurements with available probe • Min/Max/Average on all measured and calculated readings • Audible and visual threshold alarms • Multi-language user interface • Extensive discrete or continuous data logging capacity, down-loadable to PC via USB interface Specifications (Check the Fluke web for detailed specifications) Fluke 975 Included Accessories A4 alkaline batteries (3), Users Manual, Calibration Cap, FlukeView Forms Software, Power Adapter, International Power Plugs, Air Velocity Probe (Fluke 975V only) Ordering Information Fluke 975 AirMeter Fluke 975V AirMeter with Velocity 975R Regulator 975VP Air Velocity Probe Feature Range Display resolution Accuracy Measured specifications Temperature -20 °C to 60 °C 0.1 °C ± 0.9 °C from 40 °C to 60 °C ± 0.5 °C from 5 °C to 40 °C ± 1.1 °C from -20 °C to 5 °C Relative humidity 10 % to 90 % RH non- condensing 1 % ± 2 % RH (10 % RH to 90 % RH) Air velocity 50 fpm to 3000 fpm 0.25 m/sec to 15 m/sec 1 fpm 0.005m/sec 4 % or 4 fpm* 3 % or 0.015 m/sec* whichever is greater *Accuracy specification only valid for velocity readings above 50 fpm. CO2 0 to 5000 ppm 1 ppm Warm up time 1 min (5 minutes for full specification) 2.75 % + 75 ppm CO 0 to 500 ppm 1 ppm ± 5 % or ± 3 ppm, whichever is greater, @ 20 °C and 50 % RH Calculated specifications Dew point temperature -44 °C to 57 °C 0.1 °C ± 1 °C when temp: -20 °C to 60 °C RH: 40 % to 90 % ± 2 °C when temp: -20 °C to 60 °C RH: 20 % to 40 % ± 4 °C when RH: 10 % to 20 % Wet bulb temperature -16 °C to 57 °C 0.1 °C ± 1.2 °C when RH: 20 % to 90 % temp: -20 °C to 60 °C ± 2.1 °C when RH: 10 % to 20 % Volume flow rate (in a duct) 0 to 3,965 M3 /m 0 to 140,000 cfm) 0.001 M3 /min (1 cfm) N/A: The volume flow calculation will be a simple average of the data points times the duct area % outside air (based on temperature) 0 to 100 % 0.1 % N/A % outside air (based on CO2 ) 0 to 100 % 0.1 % N/A Combined inspection tool for complete air quality inspections
- 79. 77 922 Airflow Meter Data Storage: 99 readings Size (HxWxD): 175 x 775 x 419 mm Weight: 0.64 kg Battery: Four AA batteries Battery Life: 375 hours without backlight, 80 hours with backlight Two Year Warranty TPAK Toolpak See page 132 Recommended Accessories Specifications (Check the Fluke web for detailed specifications) Fluke 922 Included Accessories Fluke 922: Two Rubber Hoses, Wrist Strap, Four AA Batteries 1.5 V Alkaline, Users Manual and Soft Carrying Case Fluke 922 Kit Includes: Fluke 922 Airflow Meter, 30.48 cm Pitot tube, ToolPak, Two Rubber Hoses, Wrist Strap, Four AA Batteries 1.5 V Alkaline, Users Manual and Hard Carrying Case Ordering Information Fluke 922 Air Flow Meter Fluke 922/Kit Airflow Meter with 30.48 cm Pitot Tube General Specifications Feature Range Resolution Accuracy Operating Specifications Air Pressure ± 4000 Pascals ± 16 in H2 O ± 400 mm H2 O ± 40 mbar ± 0.6 PSI 1 Pascal 0.001 in H2 O 0.1 mm H2 O 0.01 mbar 0.0001 PSI ± 1% +1 Pascal ± 1% + 0.01 in H2 O ± 1% + 0.1 mm H2 O ± 1% +0.01 mbar ± 1% + 0.0001 PSI Air Velocity 250 to 16,000 fpm 1 to 80 m/s 1 fpm 0.001 m/s ± 2.5 % of reading at 10 m/s (2000 p/min) Air Flow (Volume) 0 to 99,999 cfm 0 to 99,999 m3 /hr 0 to 99,999 l/s 1 cfm 1 m3 /hr 1 l/s Accuracy is a function of velocity and duct size Temperature 0 °C to 50 °C 0.1°C ± 1 % + 2 °C General specifications Operating Temperature 0 ºC to +50 ºC Storage Temperature -40 ºC to +60 ºC Operating Relative Humidity Non condensing (<10 ºC) 90% RH (10 ºC to 30 ºC) 75% RH (30 ºC to 40 ºC) 45% RH (40 ºC to 50 ºC) Without Condensation IP Rating IP40 Operating Altitude 2000 m Storage Altitude 12000 m EMI, RFI, EMC Meets requirements for EN61326-1 Vibration MIL-PREF-28800F, Class 3 Max Pressure at Each Port 10 PSI Fluke 922/Kit PT12 Pitot Tube, 30.48 cm Measures pressure, air flow and velocity for maintaining balanced and comfortable ventilation The Fluke 922 makes airflow measurements easy by combining pressure, air flow, and velocity into a single, rugged meter. Compatible with most Pitot tubes, the Fluke 922 allows technicians to conveniently enter their duct shape and dimensions for maximum measurement accuracy. Use the Fluke 922 to: Ensure proper air flow balance and maintain a comfortable environment; measure pressure drops across filters and coils; match ventilation to occupant loads; monitor indoor vs. outdoor pressure relationships and manage the building envelope; and perform duct traversals for accurate airflow readings. • Provides differential and static pressure, air velocity and flow readings • Convenient colored hoses help you properly diagnose pressure readings • Bright, backlit display for clear viewing in all environments • Min/Max/Average/Hold functions for easy data analysis • Auto power off saves battery life
- 80. 78 971 Temperature Humidity Meter Carbon Monoxide Meters Fluke 561 Combined Contact and Non-contact Thermometer See page 54. Included Accessories Fluke CO-220: C50 soft carrying case and battery Ordering Information Fluke 971 Temperature Humidity Meter Fluke CO-220 Carbon Monoxide Meter CO-205 Aspirator Kit Quickly take accurate humidity and temperature readings in the air. Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Lightweight, rugged, and easy to hold, the Fluke 971 is the perfect tool for monitoring problem areas. • Simultaneously measures humidity and temperature • Measures dew point and wet bulb • 99 record storage capacity • Min/Max/Avg Data Hold • Ergonomic design with built-in belt clip and protective holster • Backlit, dual readings display • Twist-open protective cap • Low battery indicator Specifications Temperature range -20 ºC to 60 ºC Temperature accuracy 0 ºC to 45 ºC -20 ºC to 0 ºC and 45 ºC to 60 ºC ± 0.5 0C ± 1.0 ºC Resolution 0.1 ºC Response time (temperature) 500 ms Temperature sensor type NTC Relative humidity range 5% to 95% R.H. Relative humidity accuracy 10% to 90% R.H. @ 23 ºC <10%, >90% R.H. @ 23 ºC ± 2.5 % R.H. ± 5.0 % R.H. Humidity sensor Electronic capacitance polymer film sensor Data storage 99 points Response time (humidity) For 90% of total range - 60 sec with 1 m/s air movement Operating temperature: Temperature: -20 °C to 60 °C Humidity: 0 °C to 60 °C Storage temperature: : -20 °C to 55 °C Battery life: 4 AAA alkaline, 200 hours Safety: Complies with EN61326-1 Weight: 0.188 kg Size (HxWxD): 194 mm x 60 mm x 34 mm One Year Warranty Carbon Monoxide Meters CO-220 Carbon Monoxide Meter The CO-220 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels. A large, backlit LCD display shows CO levels from 0 to 1000 PPM. The MAX Hold function stores and displays the maximum CO level. 1 year warranty. Fluke 416D Laser Distance Meter See page 74 . Fluke CO-220 Fluke 971 Temperature Humidity Meter Fluke 971 Other useful tools CO-205 Aspirator Kit Allows flue gas samples up to 371°C to be drawn with the CO-220 for carbon monoxide measurement. 1 year warranty. Fluke CO-205
- 81. 79 983 Particle Counter / RLD2 Leak Detector Flashlight 6 size channels 0.3, 0.5, 1.0, 2.0, 5.0, 10.0 μm Flow rate 0.1 cfm (2.83 L/min) controlled by internal pump Count modes Concentration, totalize, audio Counting efficiency 50 % @ 0.3 μm; 100 % for particles > 0.45 μm (per JIS B9921:1997) Zero count 1 count/5 minute (per JIS B9921:1997) Coincidence loss 5 % at 56,000 particles per m3 Relative humidity ± 7 %, 20 % to 90 %, non-condensing Temperature ± 3 °C, 10 °C to 40 °C Data storage 5000 sample records (rotating buffer) of date, time, counts, relative humidity, temperature, sample volumes, alarms, label Alarms Counts, low battery, sensor fail Delay time 0 to 24 hours Sample inlet Isokinetic probe Interface RS-232 and RS-485 via RJ-45 Calibration PSL particles in air (NIST traceable) Included Accessories Fluke 983: Certificate of Calibration (NIST) Isokinetic probe Zero count filter Windows-compatible software download utility DB9 to RS-232 adapter and cable High purity tubing 1/8 in. hose barb adapter Power supply Operation manual Hard molded carrying case Fluke RLD2: Key chain carabiner and batteries. Ordering Information Fluke 983 Particle Counter Fluke RLD2 Leak Detector Flashlight Specifications RLD2 Leak Detector Flashlight Operating temperature: 10 °C to 40 °C, 20 % to 90 % relative humidity, non-condensing Storage temperature: -10 °C to 50 °C, up to 90 % relative humidity, non-condensing Power: AC adapter, 90 to 250 V AC, 50 to 60 Hz Battery life/recharge time: 8 hours/2 hours Rechargeable battery: NiMH, 4.8V at 4.5 Ah; replaceable Size (HxWxD): 209 mm x 114 mm x 57 mm Weight: 1 kg Warranty: 1 year Fluke 983 The Fluke 983 Particle Counter simultaneously measures and displays six channels of particle size distribution, temperature and humidity. This compact, lightweight, self-contained tool allows for one-handed operation. As the Fluke 983 doesn’t require level holding, it can make accurate measurements in any position. The 8 hour rechargeable battery together with a large 5000 sample record allows for complete air quality surveys in one go. The Fluke 983 is the ideal tool for determining size distribution of airborne particles or tracking down a particle source. • Simultaneously measure and display 6 channels of particle sizes, temperature and humidity • Measure particle size down to 0.3 μm • Selectable sample time, count data, programmable delay • Store 5000 records of date, time, counts, relative humidity, temperature, sample volumes, alarms and location label • Upload stored data to a PC with included software • Compact, self-contained package allows for one-handed operation • Intuitive, easy-to-use user interface • Always ready to run, with no fluids to refill • Backlit LCD for use in any lighting condition Easy to use tool for troubleshooting and maintaining indoor air quality RLD2 Leak Detector Flashlight. Leak detection made easy. The compact RLD2 uncovers refrigerant leaks instantly. Use the UV light to find the leakage area, then, use the laser pointer to pinpoint the exact leak location. • Six UV LEDs detect leak detection dyes • Laser pointer clearly locates center of the UV field for accuracy • Three LED flashlight with 100,000 hour LED life • Operating temperature 0ºC to 50ºC • Four operating modes: flashlight, UV light, laser light, UV/laser light combination • One year warranty
- 82. 8080 ScopeMeter portable oscilloscopes take you into territory standard bench scopes can’t go: where it’s harsh, hazardous and dirty – without sacrificing any capabilities. They provide you with unmatched speed, performance and analysis power while working on site. ScopeMeter® Test Tools
- 83. 81 ScopeMeter 190 Series II Combining rugged portability with the performance of a bench scope, the Fluke 190 Series can take you from troubleshooting microelectronics all the way into power electronic applications. See more, fix more and go where you’ve never gone with a scope before. The first high-performance two and four Channel scopes built for harsh industrial environments. Introducing the first high-performance portable oscilloscopes with 2 or 4 independently insulated input channels, an IP51 dust- and drip waterproof rating and a CAT III 1000 V / CAT IV 600 V safety rating. Choose from 500 MHz, 200 MHz, 100 MHz or 60 MHz bandwidth models. Now plant maintenance engineers can take a four-channel scope into the harsh world of industrial electronics. Safely troubleshoot three-phase systems like variable speed drives, UPS or back-up generators. Measure input, output and feedback signals simultaneously to diagnose industrial electronics. • 4 independent isolated input channels enable 3-axis industrial testing, simultaneous testing of input signals, output signals and feedback loops or safety interlocks • 190-XX4 model with four independent isolated inputs • 190-XX2 models with two independenet isolated scope inputs and DMM input • Fast sample rate: up to 5 GS/s with up to 200 ps resolution • Single shot, pulse width and video triggering • Deep memory: 10,000 points per trace waveform capture • CAT III 1000 V / CAT IV 600 V, safety rated • Up to seven hours of operation with high performance Li-ion batteries, that extend usage time plus optional external charger • Battery door for conveniently swapping out • Two isolated USB ports, for memory devices and PC connectivity • Security slot to lock down instrument using standard Kensington® lock • Connect & View™ triggering for intelligent, automatic triggering on fast, slow and even complex signals • Frequency Spectrum using FFT analysis • Automatic capture and REPLAY of 100 screens • ScopeRecord™ mode gives 30000 points or more per input channel for low frequency signal analysis • TrendPlot™ paperless recorder mode with deep memory for long-term automatic measurements What could you do with four channels? Take multiple measurements simultaneously to track down the root cause of your most complex troubleshooting challenges. • Easily diagnose timing-related issues with multiple signals • Real-time inspection of multiple signals simultaneously • Meaure a combination of input and output signals and system safety interlocks and feedback loops Fluke 190-502 brings wide bandwidth test applications in the palm of your hand! With the new 500 MHz model, the verification of telecommunication equipment, high frequency and wide bandwidth systems such as radar equipment has become truly portable. Conveniently verify the systems performance right ‘on the spot’, fully safely without carrying bulky lab equipment around. Battery powered and fully floating – up to 600V CAT III, for each channel and in between channel references. Find problems in industrial systems including: • Circuit voltage/current overloading • Attenuation/input impedance mismatch • Signal fluctuation/drift • Conditioning circuits signal integrity • Test point verification for critical signals • Input/output/feedback timing issues • Induced noise and disturbances • Random shutdowns/reset Diagnose VSDs* or power inverters and converters • Harmonics, transients and loads in three phase power input • Troubleshoot dc to ac converters for faulty control circuits or output IGBT gate stages • Cable interface - test PWM output for reflections and transients • Vpwm measurement to measure the effective voltage on drive outputs The toughest portable scopes ever built Application driven Technologies Electrical Electromechanical Process Controls Automation Medical Imaging Avionics A/V & Security Systems Equipment Switch Gear, Interlocks, Motors, Pumps, Fans, Furnaces, Presses, Mixers, Refrigeration Actuators, VFD Drives, Linear Motors, Pressure-Level- Flow-Position Sensors, Packaging Equipment Transducers, Sensors, Loop Controllers, Calibrated Gauges PLC´s, Sensors, Transducers, Motion Controllers, Rotory Encoders, Scanners, Readers, Printers XRay, MRI, Ultrasound Imaging equipment Flight Line Navigation Systems, Communication systems, Radar, On board aircraft control systems Retail security devices, Surveillance and monitoring equipment, RFID New
- 84. 82 ScopeMeter 190 Series II New Fluke 190-204 Fluke 190-202 Multiply your diagnostic powers with the new Fluke 190 Series II portable oscilloscopes Optional Accessories C290 Hard shell protective carrying case for 190 Series II HH290 Hanging Hook for 190 Series II instruments SCC290 FlukeView Software (full version) and C290 Carrying Case kit VPS410-R Voltage Probe set, 10:1, 300 MHz, one set red VPS410-G Voltage Probe set, 10:1, 300 MHz, one set grey VPS410-B Voltage Probe set, 10:1, 300 MHz, one set blue VPS410-V Voltage Probe set, 10:1, 300 MHz, one set green VPS420-R High working voltage probe set 150 MHz, 100:1, CAT III 2000 V (1000 V to earth) BC190 Mains adapter/battery charger EBC290 External battery charger for BP290 and BP291 TL175 TwistGuard™ safety designed Test Leads set (1 red, 1 black) BP290 Li-Ion battery pack, 2400 mAh BP291 Li-Ion battery pack, 4800 mAh SW90W FlukeView® ScopeMeter Software for Windows® VPS510-X Wide bandwidth probe set, 10:1, 500 MHz, 600V CAT III ScopeMeter test tools are rugged solutions built for industrial troubleshooting. The new Fluke 190 Series II are double-insulated floating oscilloscopes safety rated for measurements up to CAT III 1000 V/CAT IV 600 V environments. The new 500 MHz model is rated all the way up to 600 V CAT III. Rated all the way to CAT IV Measure from mV to kV safely Independently isolated inputs allow you to make measurements in mixed circuits having different ground references reducing the risk of accidental short circuits. Conventional bench oscilloscopes without special differential probes and isolation transformers can only reference measurements to line power earth ground. With standard probes that cover a wide application range from mV to kV, you are ready for anything from micro-electronics to heavy-duty higher voltage electrical applications. IP-51 rated for harsh environments Rugged and shock-proof, ScopeMeter portable oscilloscopes are built for dirty, hazardous environments. With its sealed case, it can endure dust, drips, humidity and airborne pollutants. Every time you reach for ScopeMeter you can be confident it will work reliably wherever your work takes you. USB connectivity makes it easy to capture and share waveforms The new Fluke 190 Series II offers two USB ports, electrically isolated from measurement input circuits. Easily transfer data to a PC. Archive and share waveforms with OEMs, colleagues and support staff. Store waveforms, screen captures and instrument setups onto USB memory devices. FlukeView ScopeMeter software for documenting, archiving and analysis Get more out of your ScopeMeter with FlukeView® ScopeMeter® SW90W Software for Windows. • Documentation—transfer waveforms, screens and data to your PC for printing or importing data into a report • Add text to ScopeMeter settings—give operators guidance when recalling settings • Archive—create a library of waveforms for easy reference, waveform comparison, or pass/fail testing • Analysis—use cursors, perform spectrum analysis or export data to another analysis program True RMS
- 85. Fi gu re 1. G7 03 - E1 te m pl at e A p p licatio n N o te F r o m t h e F l u k e D i g i t a l L i b r a r y @ w w w . f l u k e . c o m / l i b r a r y The G.7 03 sta ndard G.7 03 is a stan da rd or ig i- nal ly in trod uc ed fo r vo ice an d da ta tran sm ission ov er di gi ta l net w or ks . It is an IT U re co m - m en da tion (for m er ly CCIT T) th at ’s as so ciat ed w ith th e PC M stan da rd . Anal og -v oi ce to di gi ta l- da ta co nve rs io n ac co rd in g to PC M re qu ires a ba ndw id th of 64 kb /s (± 100 pp m ), re su ltin g in th e ba sic un it fo r G.7 03. Th ro ug h m ul tipl ex in g th is re su lts in a T1 of 1.5 44 M b/ s an d E1 of 2.0 48 M b/ s. Th e el ec trical ch ar ac te ristics of th e net w or k in te rfac es ar e de sc ribe d in re co m m en da tion G.7 03. Th e sign al lim its fo r a 2.0 48 M b/ s sign al ar e sh ow n in Figu re 1. M ultip le -c hannel te sting usin g tw o diffe re nt m asks A ba lu n is us ed be tw ee n th e pa tch pa nel an d a co ax ia l tran sm ission lin e to m at ch th e im pe da nce of th e 120 Ω sy m - m et rica l lin e to a 75 Ω co ax ia l lin e. Th e in pu t an d ou tp ut of th e ba lu n ea ch has its sp ec ifi c m as k. Th e Sc op eM et er 190 Se ries II po rtab le os cillo sc op es ca n sim ul - ta neo us ly pe rfor m a pa ss /fai l te st at th e in pu t an d ou tp ut of th e ba lu n w ith di ffer en t m as ks . Th e flo at in g an d isol at ed in pu ts of th e Fluk e Sc op eM et er 190 Se ries II te st to ol s m ak e th es e m ea su re m en ts po s- sibl e w ithou t th e risk of m ak in g un w an te d gr ou ndi ngs . M or eo ve r, th e hig h im pe da nce pr ob es al lo w fo r di re ct m ea su re m en ts w ithou t lo ad in g th e lin e an d w ithou t th e nee d fo r an ex te rn al di ffer en tial pr ob e. Testing teleco m m unicatio n eq uip m ent using P ass/Fail m ask testing w ith a Fluke S co p eM eter ® 19 0 S eries II Editin g th e pass/f ail te m pla te s W ith Fluk eV ie w w e ca n ex po rt a w av ef or m in to a sp re ad sh ee t an d a cu stom te m pl at e ca n be cr ea te d by ed itin g a w av ef or m us in g Ex ce l. A re fe re nce te m pl at e fo r pa ss /fai l te stin g ca n be cr e- at ed by sa ving w av ef or m s from Fluk eV ie w in .csv fo rm at an d ed itin g th e w av ef or m us in g, fo r Fi gu re 2. IS DN 30 ne tw or k ISD N 30 Pa tc h Pa ne l B al un SD H D is tr . 2 Mb /s 12 0 Ω 2 Mb /s 12 0 Ω 2 Mb /s 75 Ω Te le ph on e Ex ch an ge N ow adays dig ital com m unic ation syste m s such as Synchro nous D ig ital H ie ra rc hy (S D H ) in Euro pe and th e Synchro nous O ptical N etw ork (S O N ET) in N orth Am erica re quire sta ndard te st m eth ods. The ele ctric al sig nals are te ste d again st th e sta ndard IT U puls e m asks. The Flu ke ScopeM ete r 19 0 Series II portable oscilloscope offers a sta ndard pass/fail fu nction th at can be used to perform th ese te sts . The in strum ent is capable of sto ring up to 10 0 “f ails ” fo r fu rther analy sis . Application Note Demystifying drive anomalies using the Fluke 190 Series II 2-Channel ScopeM eter ® portable oscilloscope F r o m t h e F l u k e D i g i t a l L i b r a r y @ w w w . f l u k e . c o m / l i b r a r y Vogel, an HVAC technicia n, becom es energized when dis- cussing the return on investment in his handheld Sco peMeter ® Test Tool. “Ou t at one large site , where we monitor and trouble- sho ot variable frequency drives (VFDs), com ponent-level repair can often mean the difference between a $20 repair part and a $100,000 repair bill. I know firsthand, becau se we recently docum ented that very scenario.” On large VFDs, Vogel use s his Sco peMeter portable oscilloscope to uncov er cap acitance problems, transistor firing misha ps, and eve n bleed-throughs on a gate. “Of cou rse, a transistor is basi- cally a lightn ing-fast switch ,” he say s. “It switch es back and forth between open and closed , and it can som etimes start to break down. Wh en that happens, motors will start doing weird things. For exa mple, at load stage we’ll actually see the motor banging back and forth as if it is not sure which way to turn.” Se eing is be lieving ? More ap tly, se eing is un de rstand ing. If anyone can wring every las t ounce of fun ctionality out of a pie ce of ele ctronic tes t equip me nt, it’s Ch ris Vogel. At Sie me ns Building Technolog ies , Vogel has his wo rk cut out for him keeping HV AC syste ms run nin g for the com- pany’s large comm erc ial custo me rs in Flo rida’s tropic al we ath er, wh ich is ma rke d by seem ing ly nonstop 90 °F tem perature s and 95 % humidity lev els . And tha t’s jus t one of the challenges fac ed by tec hnicia ns at Sie me ns Building Technolog ies , wh ich pla ys a mo re sw eepin g role in its custo me rs’ success: ensuring energ y efficie ncy, comfort, prote ction again st unautho rized access, and fire safety year- round for every building or office tow er entruste d to it by custo me rs. Storing a slice of tim e It’s important, say s Vogel, that the technicia n be able to cha racterize VFD problems by cap turing a waveform from the offending drive. His premise: A signal is much more telling when presen ted in a waveform view than in a single, static volt- age reading. The signal has a sha pe and value that may look right at a glance , but cou ld just as eas ily have a distortion or rough “ed ge,” or a momentary spike alm ost too sho rt to be see n. Either problem, or a host of other signal anomalie s, would be indistinguishable with just a numeric reading of the signal. “Th e scope allo ws me to record inform ation, and from a number of sou rces—sine waves on the inputs and outputs of VFDs, current and voltage—and, for that matter, make com pari- son s of current and voltage so that I can derive a power factor for the circuit.” Operator: Chris Vogel, HVAC Technician for Siemens Building Technologies Testing Functions Case Study Measuring tools: 190 Series II 2-Channel ScopeMeter® Test Tool Measurements: Current and voltage waveform analysis, power factor Connect the ScopeMeter test tool and view the result: the start of every measurement It frequently happens that service engineers have to spend a lot of time adjusting their measuring device such as a portable oscil- loscope for an optimal setting. Valuable time is spent completing this set up, and ideally, this could be done automatically. With the introduction of the new ScopeMeter 190 Series II, Fluke has revamped its unique feature, Connect and View. Scope users know how dif- ficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke’s unique Connect and View recognizes signal patterns, and automatically sets up correct triggering, attenuator and time base settings. Switching on the ScopeMeter portable oscilloscope to display correct signal patterns only takes a couple of seconds, and this is exactly what an operator wants. Settings regarding amplitude, timebase, triggering, etc. are automatically detected and adjusted, followed by display- ing the signal in the correct ratio with respect to the horizontal and vertical axis. At least 1.5 to 4 periods of the signal are measured before the pattern is shown. Connect and View provides a stable, reliable and repeat- able display of virtually any signal, including motor drive and control signals, without touch- ing a button. Signal changes are instantly recognized and settings adjusted for, once again, a stable display. This is all done auto- matically, but manual overruling is still possible. If manual over- ruling is needed, the ScopeMeter 190 Series will switch from auto- matic to 1/2 automatic, which is visible on the display. Figure 1 gives an example of the different types of waveforms which can de detected by Connect & View. If required the criteria for best settings can be optimized by switching on one or all of the following options: Automatic trigger Application Note F r o m t h e F l u k e D i g i t a l L i b r a r y @ w w w . f l u k e . c o m / l i b r a r y Figure 1. AC/DC coupling Glitch detect Figure 2 shows the different settings. 83 ScopeMeter 190 Series II AS400 Recommended Accessories EBC290VPS420-RSCC290SW90W If you’ve used other scopes, you know how tricky triggering can be. If settings are incorrect, results can be unstable or incorrect. Connect-and- View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable and repeatable display of virtually any signal including motor drive and control signals. It’s especially fast and convenient when you’re measuring a number of test points in rapid succession. 190 Series II models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors. Scope users know how frustrating it is to see a one- time anomaly flash by, never to be seen again. Not with the ScopeMeter 190-series! Now you can look back in time with the touch of a button. In normal use, the instrument continuously memorizes the most recent 100 screens. At any moment in time, you can ‘freeze’ these latest screens and scroll through them picture-by-picture or replay them as a ‘live’ animation. Cursors and zoom can be used for further analysis. You can even use the advanced trigger capabilities to capture up to 100 specific events. Two sets of 100 screens with individual time stamps can be stored for later recall or download to a PC. See dynamic signal behavior instantly The digital Persistence mode helps to find anomalies and to analyze complex dynamic signals by showing the waveforms amplitude distribution over time using multiple intensity levels and user selectable decay time – it’s as if you’re looking at the display of an analog, real time oscilloscope! A fast display update rate reveals signal changes instantaneously, useful for instance when making adjustments to a system under test. Connect-and-View™ captures even the most complex motor drive signals. The built in multimeter provides convenient precision measurements. Connect-and-View™ triggering for an instant, stable display Built-in digital multimeter (2 channel models) Automatic capture and replay op 100 screens A range of application notes is available. See the Fluke website. Included Accessories Fluke 190 Series II 4-channel instruments include a set of four probes, hanging strap, handstrap, USB cable with mini-B connector, double capacity Li-ion battery BP291, battery charger/power adapter BC190, a FlukeView demo package and users manuals on CD-ROM.The /S-versions also include the C290 hard-shell carrying case and the FlukeView software package.The 2-channel models come with two probes plus a set of TL175 test leads and a single capacity battery BP290.The 190-502 also includes two pieces TRM50 coaxial feedthrough terminator. The SCC290 kit includes: C290 hardshell carrying case and FlukeView® for Windows® software (full version). Ordering Information Fluke-190-502/S Color ScopeMeter (500 MHz, 2 channel), with SCC290-kit Fluke-190-204/S Color ScopeMeter (200 MHz, 4 channel), with SCC290-kit Fluke-190-204 Color ScopeMeter (200 MHz, 4 channel) Fluke-190-202/S Color ScopeMeter (200 MHz, 2 channel), with SCC290-kit Fluke-190-202 Color ScopeMeter (200 MHz, 2 channel) Fluke-190-104/S Color ScopeMeter (100 MHz, 4 channel), with SCC290-kit Fluke-190-104 Color ScopeMeter (100 MHz, 4 channel) Fluke-190-062/S Color ScopeMeter (60 MHz, 2 channel), with SCC290-kit Fluke-190-062 Color ScopeMeter (60 MHz, 2 channel) AS400 Probe Accessory Extension set for VPS400 Series probes BP291 Double capacity Li-Ion battery (4800 mAh) pack for 190C Series II BP290 Single capacity Li-ion battery (2400 mAh) pack for 190-series II C195 Soft padded carrying case for ScopeMeter and accessories C290 Protective Carrying Case for Fluke 190-series II EBC290 External Battery Charger for charging BP290 or BC291 outside the instrument HH290 Hanging Hook RS400 Probe Accessory Replacement set for VPS400 series probes RS500 Probe Accessory Replacement set for VPS510 series probes SCC290 Software and Case kit for Fluke 190 Series 190 Series II. Includes SW90W and C290. SW90W FlukeView® ScopeMeter Software for Windows® (full version) TRM50 Coaxial 50 Ω feedthrough terminator VPS410-x Probe-set, 10:1, 1000V CAT III / 600V CAT IV (colors: blue, green, red, grey) VPS420-R Probe-set, bicolor (r/b), 100:1, 150 MHz, 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV. VPS510-x Wide bandwidth probeset, 500 MHz, 10:1, 600V CAT III
- 86. 84 ScopeMeter® 120 Series SCC128 See page 125 Recommended Accessories Fluke 125 Included Accessories PM 8907 line adapter/charger, STL120-III shielded test leads set (1 red, 1 grey) including hook clips, BB120 shielded BNC adapter, BP120MH NiMH battery pack, VPS40-III wide bandwidth Voltage Probe (Fluke 124/125), TL175 Safe-guard testlead, i400s current clamp (Fluke 125), Getting Started booklet, user’s manual (cd-rom) Ordering Information Fluke 123 Industrial ScopeMeter® (20MHz) Fluke 123/S Industrial ScopeMeter® (20MHz) + SCC120 kit Fluke 124 Industrial ScopeMeter® (40MHz) Fluke 124/S Industrial ScopeMeter® (40MHz) + SCC120 kit Fluke 125 Industrial ScopeMeter (40 MHz) Fluke 125/S Industrial ScopeMeter (40 MHz) + SCC120 kit SCC120 FlukeView® Software + OC4USB Cable + Carrying Case OC4USB USB Interface Cable PM9080 RS-232 Interface Cable DP120 Differential Voltage Probe ITP120 Isolated Trigger Probe SW90W FlukeView Software BHT190 Set of 3 break-out adapters (Fluke 125) OC4USB See page 86 The compact ScopeMeter 120 Series is the rugged solution for industrial troubleshooting and installation applications. It’s a truly integrated test tool, with oscilloscope, multimeter and “paperless” recorder in one affordable, easy-to-use instrument. Find answers to problems in machinery, instrumentation, control and power systems quickly and easily. • Dual-input 40 MHz or 20 MHz digital oscilloscope • Two 5,000 counts true-RMS digital multimeters • A dual-input TrendPlot™ recorder • Bus Health Test for industrial bus systems (Fluke 125) • Connect-and-View™ trigger simplicity for hands-off operation • Power Measurements and Harmonics measurement (Fluke 125) • Shielded test leads for oscilloscope, resistance and continuity measurements • Up to 7 hours battery operation • 600 V CAT III safety certified • Optically isolated interface for PC and Printer connection (optional) • Rugged, compact case Connect-and-View™ triggering for an instant, stable display Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke’s unique Connect-and-View recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal - including motordrive and control signals - without touching a button. Signal changes are instantly recognized and settings adjusted for - once again - a stable display. Use TrendPlot™ to help find intermittents fast The toughest faults to find are those that happen only once in a while: intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You may not be around to see it – your Fluke ScopeMeter will. In this “paperless recorder” mode, you can plot the minimum and maximum peak values and average over time – up to 22 days (Fluke 190 Series) or 16 days (Fluke 120 Series). Bus Health mode (Fluke 125) Bus Health mode gives a clear “Good/ Bad” indication for the electrical signals on industrial buses and networks, such as CAN-bus, Profi-bus, RS-232 and many more. The Fluke 125 validates the quality of the electrical signals as soon as any electrical signals are passed along the network. Fluke 124 Fluke 123 True RMS DP120 See page 86 C125 See page 124 SCC120 Connect-and-View captures even the most complex motor drive signals. Bus Health mode allows for an analysis of the signal quality on an industrial network. See page 85 for specifications. Three-in-one simplicity
- 87. 85 ScopeMeterTest Tools General ScopeMeter Specifications Fluke 225C/S Industrial Networks and Bus Health Test Built on the Fluke 190C-series, the 225C/S makes Bus Health Test analysis on the electrical signals on an industrial bus or network, giving a clear “Good”, “Weak” or “Bad” validation of the relevant parameters, presented next to the actual measurement value. The Fluke 225C/S can make the signal quality validation as soon as electrical signals are passed along the network, without looking at the data content. It finds errors like improper cable connections, bad contacts, incorrect grounding and missing or superfluous terminators. Included Accessories BHT190 Set of three break-out adapters for industrial networks BC190 Mains adapter/Battery charger BP190 NiMH battery pack (installed) VPS210 Voltage probe sets (1 red, 1 grey) TL175 SafeGuard(r) Testlead set C190 Hard shell protective carrying case OC4USB Optically insulated USB interface cable for PC connectivity SW90W FlukeView software package (full version) Ordering Information 225C/S Color ScopeMeter (200 MHz, 2.5 GS/s) with Bus Health Test capabilities and SCC-kit. Model: 190-502 190-204 190-202 190-104 190-102 190-062 225C/S 125 124 123 Oscilloscope Specifications Bandwidth 500 MHz 200 MHz 100 MHz 60 MHz 200 MHz 40 MHz 20 MHz Max. real time sample rate 5 GS/s 2.5 GS/s 1.25 GS/s 625 MS/s 2.5 GS/s 25 MS/s Input sensitivity 2 mV/div. 5 mV/div. Max. timebase speed 1 ns/div. 2 ns/div. 4 ns/div. 10 ns/div. 5 ns/div. 10 ns/div. 20 ns/div. Inputs and digitizers 2 + Ext.Tr. 4 2 + Ext.Tr. 4 2 + Ext.Tr. 2 + Ext.Tr. 2 + Ext.Tr. 2 (+ Ext.Trig. Optional) Independently floating isolated inputs 600 V CAT III 1000 V CAT III, 600 V CAT IV 600 V CAT III - Max.record length …. In Scope mode …. In ScopeRecord mode 10 000 samples per trace 30 000 min/max pairs 3000 27500 512 min/max pairs per input Glitch capture 8 ns peak detect at full timebase range 50 ns 40 ns True RMS multimeter built-in (5000 counts) yes - yes - yes dual 5000 counts DMM Dedicated test capabilities V/Hz ratio - V/Hz ratio - V/Hz ratio Bus health test - General Specifications Mains adapter/battery charger incl. (type) BC 190 PM8907 Battery installed BP291 BP291 BP290 BP291 BP290 BP290 BP190 BP120MH Size 265 x 190 x70 mm ** 232 x 115 x 50 mm Weight 2.1 kg 2.2 kg 2.1 kg 2.2 kg 2.1 kg 2 kg 1.2 kg Safety certified 1000 V CAT III / 600 V CAT IV 600 V CAT III Typical status overview of a bushealth measurement.
- 88. VPS410-X PM9091/9092 RS400 VPS420-R PM9081 AS400 VPS510-x PM9082 BP291 STL120-III PM9093 OC4USB VPS40-III DP120 EBC290 86 ScopeMeter® Accessories ScopeMeter series 190-series II 120-series VPS410-x VPS420-R VPS510-x STL120-III VPS40-III DP120 Description Voltage probe High working voltage probe* Wide bandwidth voltage probe Shielded Test leads Voltage probe Differential Voltage Probe Colors available red, grey, blue, green bicolor (red & black) red, grey, blue, green red + grey (1 set) black red + grey (1 set) Attenuation 10:1 100:1 10:1 1:1 10:1 200:1 / 20:1 Bandwidth 300 MHz 150 MHz 500 MHz 12.5 MHz 40 MHz 20 MHz Length 1.2 m 1.2 m 1.2 m 1.2 m 1.2 m 1.5 m (2x) Safety Rating CAT II -- -- -- 1000 V 1000 V 1000 V Safety Rating CAT III 1000 V 1000 V* 300 V 600 V 600 V 600 V Safety Rating CAT IV 600 V 600 V* -- -- -- -- PM9091 PM9092 PM9081 PM9082 PM9093 Description Safety designed 50 Ω BNC Cable set (1 red, 1 black, 1 grey) Dual banana plug (m) to female BNC Dual banana jack (f) to BNC plug (m) BNC (m) to dual BNC (f) ‘T-piece’ Length 1.5 m each 0.5 m each -- -- -- Safety Rating CAT III 300 V 600 V 600 V 600 V 10:1 * High Working Voltage Probe is specified for working voltages (between probe tip and reference lead) up to 2000V in CAT III or 1200V in CAT IV environments. Reference lead voltage (between reference lead and earth ground): 1000V in CAT III, 600V in CAT IV. These specification applies only when used with Fluke 190-series II Test Tool. RS400 Probe Accessory Replacement set for VPS200 and VPS400 series probes AS400 Accessory Extension set for VPS200 and VPS400 series probes PM9080 RS232 interface cable for 120-series OC4USB Optocoupler to USB interface cable for 120 series BP120MH Ni-MH battery pack for Fluke 120-series and Fluke 43B BP290 Single capacity Li-ion battery pack for 190-series II BP291 Double capacity Li-ion battery pack for 190-series II EBC290 External battery charger for BP290 and BP291 TRM50 Coaxial 50 Ω feedthrough terminator RS500 Probe Accessory Replacement set for VPS510 series probes C437-II Hard shell protective carrying case with rollers for 190-II and 430-II RF-AM90 RF Detector and Demodulation probe
- 89. 87 We offer an extensive range of power quality test tools for troubleshooting, predictive maintenance and long-term recording in industrial and utility applications. For the development and test of electrical equipment, our high-precision power analyzers enable easy and reliable use in the field or as a bench unit in test laboratories. Additionally, the Fluke-patented energy loss algorithm, Unified Power Measurement, measures and quantifies energy losses due to harmonics and unbalance issues, allowing the user to pinpoint the origin of energy waste within a system. Power Quality Tools and Power Analyzers
- 90. 88 Power Quality Selection Guide Powerqualitytoolshelppinpointproblemsfast BasicmeasurementsApplicationuse SinglephaseThreephase VR171034543B430II1735174017501760 RMSvoltageDetailedRMStrendingshowshowconnectedloads behave.RMSCurrent Energystudies MeasureV,I,kW,Cos/DPF,kWhrGetdetailedpowerandenergyconsumption profilesduringenergyauditsandpinpointsavings opportunities. MeasureMIN/MAXandAVGvalues 10daylogging Energyaggregation Utilitymeterpulseinput EnergyLoss(Eff.kW,ReactivekVAR,UnbalancekVAR, DistortionkVAR,NeutralkVAR) Energylosscalculator Basicharmonicsstudy THDmeasurement(V&I)Discoverthesourceofdistortioninyourinstallation,so thatyoucanfilterthoseloadsormovethemtoseparate circuits. Harmonics1to25forV&I(not1743) Tabularvalues Neutralcurrentmeasurement Crestfactor Advancedharmonicsstudy FullharmonicspectrumIfdistortingloadsarecausingproblemsinyour installation,youneedcomprehensivedatatointentify thesourceandcreateasolution. Powerharmonics Harmonics1to50anddc(noDC) (not1743) k-factor %Fundamentaland%RMS BasicIndustrialPQTroubleshooting OscilloscopefunctionWhentroubleshootinginthefield,graphicaldata enablesyoutotracethesourceoftheproblemathand.Voltagedipsandswells Phasordiagram Trendrecording Inrushcurrent AdvancedindustrialPQtroubleshooting ComprehensiveloggingcapabilityComplexinstallationsoftenrequireadeeperdiveinto measurementdata.Multipleloadsmaybeinteracting randomlytocauseasingleproblem. Transientcapture Flicker EN50160analysis ComplexSysteminteractioneventcapture(manual thresholdsetting) Random/variablesystemeventcapture(Adaptive thresholdsetting) 400Hz(only437-II) UtilityPQbenchmarking PhasesequencecomponentsBeforeyouinstallsensitiveloads,makesureyou understandtheexistingqualityofpowerdeliveredby yourutility.Comparingbenchmarksovertimecanhelp pinpointpotentialareasofconcern. Interharmonics Mainssignaling IEC61000-4-30ClassA Software PowerLogTomakeuseofthepowerdatayoucollect,youneed softwarethatcanhelpanalyzeyourfindingsandshare themwithequipmentprovidersandplantmanagement. PQLog PowerAnalyze PQAnalyze FlukeViewForms FSDcard(max32GB)8GB8GB
- 91. 89 345 Power Quality Clamp Meter Fluke 345 Included Accessories Soft carrying case, Power Log software, Test probes, Test leads, Alligator clips, International ac adapter / battery eliminator, Printed English User manual, Multi-language manual on CD Ordering Information Fluke 345 Power Quality Clamp Meter View waveforms for equipment checking and setup Log parameters over time to track down intermittent faults Recommended Accessories C550 See page 130 TP1-1 See page 123 AC220 See page 124 TP220-1 See page 123 TLK291 See page 123 The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three-phase electrical loads. With a bright color display to see waveforms and trends, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. • High safety rating: 600V CAT IV / 1000V CAT III rated for use at the service entrance • ac/dc current measurements: Clamp- on measurement of ac peak and dc current up to 2000 A without breaking the circuit • Harmonic analysis: Analyze, display and log harmonics up to the 30th harmonic (40th harmonic for 15 Hz to 22 Hz) • Verify batteries: Direct measurement of dc ripple (%) for battery and dc systems Specifications (Check the Fluke web for detailed specifications) Power supply: 1.5 V Alkaline AA MN 1500 or IEC LR6 x 6 Battery Battery life (typical): >10 hours (backlight on full); >12 hours (backlight reduced) Safety: IEC 61010-1 600 V CAT IV, 1000V CAT III (maximum input phase-phase 825V rms) double or reinforced insulation, pollution degree 2 Protection: IP40; EN60529 Operating temperature: 0 °C to 50 °C Display: Color transmissive LCD 320 x 240 pixels (70 mm diagonal) with 2 level backlight Digital output: USB interface to a PC Size (HxWxD): 300 mm x 98 mm x 52 mm Jaw opening: 60 mm Jaw capacity: 58 mm diameter Weight (including batteries): 0.82 kg Two Year Warranty Current measurement DC, DC rms, AC rms All measurements DC and 15 Hz to 1 kHz. Maximum overload 10,000 A or RMS x frequency < 400,000. Amps rms is a true rms measurement (AC + DC). Measuring range 0 – 2000 A dc or 1400 AC rms Harmonics All measurements up to 30th harmonic (40th harmonic for 15 Hz to 22 Hz); Frequency range F0 : 15 Hz to 22 Hz and 45 Hz to 65 Hz; Iacrms > 10A Voltage measurement DC, DC rms, AC rms All measurements DC and 15 Hz to 1 kHz. Maximum overload 1,000 V rms. Volts rms is a true-rms measurement (AC + DC). Measuring range 0 – 825 V DC or AC rms Harmonics All measurements up to 30th harmonic; Frequency range F0 : 15 Hz to 22 Hz and 45 Hz to 65 Hz; Vacrms > 1V Watts measurement (single- and three-phase) DC, DC rms, AC rms Measuring range 0 – 1650 kW DC or 1200 kW ac VA measurement (single- and three-phase) DC, DC rms, AC rms Measuring range 0 -1650 kVA DC or 1200 kVA ac VAR measurement (single- and three-phase) Measuring range 0 – 1250 kVAR Power factor (single- and three-phase) Measuring range 0.3 cap…1.0… 0.3 ind (72.5° cap…0°… 72.5° ind) Displacement power factor Measuring range 0.3 cap … 1.0 … 0.3 ind (72.5° cap ... 0° ... 72.5° ind) Kilowatt Hour (kWHr) Measuring range 40,000 kWHr Scope function Time base 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms/div Current management: Ranges 10 A/20 A/40 A/100 A; 200 A/400 A/1000 A/2000 A Voltage measurement: Ranges 4 V/10 V/20 V/40 V/100 V; 200 V/400 V/1000 V Inrush current function All measurements dc and 15 Hz to 1 kHz Ranges 40, 400 and 2000 A Memory Up to 50 screen shots and over 150,000 individual measurement values The ideal troubleshooting tool for modern electrical loads
- 92. 90 43B Single-phase Power Quality Analyzer The Fluke 43B is the choice for diagnosing and troubleshooting power quality and general equipment failures. Ease to use thanks to menu selection of the power modes, it combines the capabilities of a power quality analyzer, a 20 MHz oscilloscope, a multimeter and a data recorder in a single instrument. Specifications (Check the Fluke web for detailed specifications) Battery life: Rechargeable Ni-MH pack (charger included), 6 hrs typical (continuous) Shock & Vibration: Mil 28800E, Type 3, Class III, Style B. Operating temperature: 0°C to 50°C; Case: IP51 (dust, drip, waterproof) Size (HxWxD): 232 mm x 115 mm x 50 mm; Weight: 1.1 kg Three Years Warranty Included Accessories TL224 test lead set, AC220 alligator clip set, TP4 test probe set, BP120MH rechargeable battery pack, BB120 shielded BNC adapter, PM8907 line adapter/charger, i400s AC current clamp, AB200 alligator clip set, TP1-1 test probe set, C120 hand carrying case, OC4USB interface cable, SW43W FlukeView software, VPS 40 voltage probe, Fluke 61 IR thermometer, user and application manual. Ordening information Fluke 43B Power Quality Analyzer (single-phase) Recommended Accessories 80TK See page 128 i1000s See page 126 i2000flex See page 126 Fluke 43B On all inputs True RMS Menu items Measurements Ranges Accuracy Volts/Amps/Hz Volts Amps Mains frequency CF Crest Factor 5.000 V - 1250 V 50.00A - 50.00 kA 40.0 - 70.0 Hz 1,0 à 10,0 ±(1%+10) ±(1%+10) ±(0.5%+2) ±(5%+1) Power Watts, VAR, VA PF, DPF, COS 250 W - 1.56 GW 0.25 W-0.9 0.90-1.00 ±(4%+4) ±0.04 ±0.03 Harmonics Volts Amps Watts K-factor 1 st to 51 st harmonic 1 st to 51 st 1 st to 51 st 1.0 to 30.0 ±(3%+2) to ±(15%+5) ±(3%+8) to ±(15%+5) ±(5%+2) to ±(30%+5) ±10% Sags & Swells Voltage and Current 4 min-16 days selectable ±(2%+10) Transient Capture 40 ns pulse width Up to 40 transients Select 20/50/100/200% above or below line voltage ± 5% of full scale Inrush Current 1 sec. to 5 min selectable 1 A to 1000 A ± 5% of full scale Ohms/Continuity/ Capacitance Ohms Capacitance 500.0 Ω to 30.00 MΩ 50.00 nF to 500.0 μF ± (0.6%+5) ± (2%+10) Temperature (with accessory) ºC ºF -100.0ºC to 400.0ºC -200.0ºF to 800.0ºF ± (0.5%+5) Scope DC, AC, AC+DC, peak, peak-peak, Hz, duty cycle, phase, pulse width, crest factor Sampling rate: Bandwidth: Voltage BW (Channel 1) Current BW (Channel 2) 25 MS/sec 20 MHz 15 kHz Screen saves All functions 20 screens Recording V/A/Hz, Power, Harmonics, Ω/Cap, Temperature, Scope 4 min - 16 days selectable Select any two parameters display mode in each The perfect tool for tracking down single-phase power-related problems • Voltage, current, and power harmonics • Up to 51st harmonic • Total harmonic distortion (THD) • Phase angle of individual harmonics • Watts, power factor, COS , VA and VAR • Voltage and current waveforms • Continuously measure volts and amps on a cycle-by-cycle basis for up to 16 days • Use cursors to read time and date of sags and swells • Connect-and-View™ scope for quick waveform display • View voltage and current channels simultaneously
- 93. 91 VR1710 Single-Phase Voltage Quality Recorder The Fluke VR1710 is a single-phase, plug- in voltage quality recorder that provides fast and easy recording of voltage trends, dropouts, harmonics and general power quality including dips and surges to help maintenance and facilities management personnel easily pinpoint the root cause of voltage problems. Voltage quality parameters including RMS average, transients, flicker, and harmonics up to the 32nd are recorded using a user- selected average period from 1 second to 20 minutes. • Clear graphical summary of data and quick overview of key power quality parameters • Get the complete picture with Min, Max, Average RMS values (1/4 cycle) with time stamps • See the detailed with actual transient display (> 100 μs) with time stamp • Comprehensive analysis of Individual harmonic and THD values with trends Specifications (Check the Fluke web for detailed specifications) Display: LED Size (HxWxD): 23 x 19.75 x 22.2 cm Included Accessories Plug-in Fluke VR1710, USB cable, PowerLog software CD, universal power cord adapters. Ordering Information Fluke VR1710 Voltage Quality Recorder Fluke VR1710 Includes PowerLog software Fluke VR1710 and included accessories PowerLog Setup – Simple set up of internal clock, logging periods, and intervals with default values for quick results. PowerLog View – Data presentation showing RMS voltage and harmonic trends, actual transients, summary information and statistics in accordance with EN50160. Actual transient display (> 100 μs) with time stamp– Quickly identify issues with included graphical software. Statistical analysis of voltage event – reduces analysis time by tracking event quantities and magnitudes. Applications • Voltage recording – Monitors and records supply voltage; measures RMS average, minimum and maximum values, and checks whether the socket outlet is providing voltage within tolerance. • Distortion measurement – Measure frequency and harmonics; check whether the distorting loads (UPS systems, drives, etc.) are affecting your other equipment. • Flicker measurement – Quantify the affects of switching loads on lighting systems. • Voltage transients – Capture those intermittent, momentary events that may be affecting your equipment; the full waveform is captured with date, timestamp, and duration. Weight: 0.8 kg Two years warranty Operating voltage 70 V to 300 V Min/Max/Avg RMS value Resolution 0.125 V Number of events 175,000 Dips/Interruptions Yes Time resolution 5 ms Voltage resolution) 0.125 V Over-voltages Yes Frequency Yes Harmonics measurement EN 61000-4-7 (up to 32nd) Flicker measurement EN 61000-4-15 Number of recording channels 1 Phase to Neutral 2 Phase/Neutral to Ground Recording time 1 day to 339 days depending on average time from 1 second to 20 minutes Transients Yes (> 100μs) Frequency range 50 Hz ± 1 Hz and 60 Hz ± 1 Hz Safety category rating CAT II 300 V Easy-to-use solution for detecting and recording voltage quality problems
- 94. Compliant Fluke 435 II / 437 II 92 430 Series II Three-Phase Power Quality and Energy Analyzers More detailed power quality analysis capability, and a Fluke-patented energy monetization function The new Fluke 434, 435 and 437 Series II models help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single- phase power distribution systems. Additionally, the Fluke-patented energy loss algorithm, Unified Power Measurement, measures and quantifies energy losses due to harmonics and unbalance issues, allowing the user to pinpoint the origin of energy waste within a system. • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars. • Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp. • PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.). • Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up. • Automatic Transient Mode: 435 and 437 Series II analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV. • Fully Class-A compliant: 435 and 437 Series II analyzer conduct tests according to the stringent international IEC 61000-4-30 Class-A standard with 435 and 437 Series II analyzers. • 400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems. • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools. • Highest safety rating in the industry: 600 V CAT IV/ 1000 V CAT III rated for use at the service entrance. • Automatic Trending: Every measurement is always automatically recorded, without any set-up. • System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard • Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals. Unified Power Measurement Fluke’s patented Unified Power Measurement system (UPM) provides the most comprehensive view of power available, measuring: • Parameters of Classical Power (Steinmetz 1897) and IEEE 1459-2000 Power • Detailed Loss Analysis • Unbalance Analysis • These UPM calculations are used to quantify in dollars the cost of energy loss caused by power quality issues. Energy savings The cost of power quality could only be quantified in terms of downtime caused by lost production and damage to electrical equipment. The Unified Power Measurement (UPM) method now goes beyond this to achieve energy savings by discovering the energy waste caused by power quality issues. Using the Unified Power Measurement, Fluke’s Energy Loss Calculator will determine how much money as facility is losing due to waste energy. Unbalance UPM gives a more comprehensive breakdown of the energy consumed in the plant. In addition to measuring reactive power (caused by poor power factor), UPM also measures the energy waste caused by unbalance; the effect of unevenly loading each phase in three-phase systems. Harmonics UPM also provides details of the energy wasted in your facility due to the presence of harmonics. The presence of harmonics in your facility can lead to: • Overheating transformers and conductors • Nuisance tripping of circuit breakers • Early failures of electrical equipment Fluke 437-II Fluke 435-II Fluke 434-II True RMS On all inputs New Track harmonics up to the 50th, and measure and record THD in accordance with IEC61000-4-7 requirements. The System-Monitor overview gives instant insight into whether the voltage, harmonics, flicker, frequency and the number of dips and swells fall outside the set limits. A detailed list is given of all events falling outside the set limits. Phasor diagram.
- 95. 93 430 Series II Three-Phase Power Quality and Energy Analyzers Logging provides instantaneous analysis of user selectable parameters. Fluke 437 II with all standard accessories. Included Accessories TL430 test lead and alligator clip set, i430flex-TF, 61 cm, 4 clamps, BC430 power adapter, BP290 single capacity Li-ion battery, International plug adapter set, WC100 color coding clips and regional decals, 8 GB SD card, PowerLog on CD USB cable A-Bmini C1740 softcase (434-II, 435-II), C437 hard case (437-II) Ordering information Fluke 434-II Three-Phase Energy Analyzer Fluke 435-II Three-Phase Power Quality and Energy Analyzer Fluke 437-II Three-Phase Power Quality and Energy Analyzer Battery life: 7 hours operating time per charge on Li-ion battery pack Safety: EN61010-1 (2nd edition) pollution degree 2; 1000 V CAT III / 600 V CAT IV Case: Rugged, shock proof with integrated protective holster, IP51 (drip and dust proof) Shock: 30 g; Vibration: 3g according to MIL-PRF-28800F Class 2 Operating temperature: 0°C to +50°C Size (HxWxD): 265 mm x 190 mm x 70 mm; Weight: 2.1 kg Three Years Warranty BP291 See page 86 Recommended Accessories i5sPQ3 See page 98 i430-FLEXI-TF-4PK See page 98 See page 98 for power quality current clamps Voltage inputs Number of inputs 4 (3 phase + neutral) dc-coupled Maximum input voltage 1000 Vrms Nominal voltage range Selectable 1 V to 1000 V Max. peak measurement voltage 6 kV (transient mode only) Input impedance 4 MΩ//5 pF Bandwidth > 10 kHz, up to 100 kHz for transient mode Scaling 1:1, 10:1, 100:1, 1,000:1 10,000:1 and variable Current inputs Number of inputs 4 (3 phase + neutral) dc- or ac-coupled Type Clamp or current transformer with mV output or i430flex-TF Range 0.5 Arms to 600 Arms with included i430flex-TF (with sensitivity 10x) 5 Arms to 6000 Arms with included i430flex-TF (with sensitivity 1x) 0.1 mV/A to 1 V/A and custom for use with optional ac or dc clamps Input impedance 1 MΩ Bandwidth > 10 kHz Scaling 1:1, 10:1, 100:1, 1,000:1 10,000:1 and variable Measurement modes Scope 4 voltage waveforms, 4 current waveforms, Vrms, Vfund. Arms, A fund, V @ cursor, A @ cursor, phase angles Volts/amps/hertz Vrms phase to phase, Vrms phase to neutral, Vpeak, V Crest Factor, Arms Apeak, A Crest Factor, Hz Dips and swells Vrms½, Arms½, Pinst with programmable threshold levels for event detection Harmonics dc, 1 to 50, up to 9th harmonic for 400 Hz Harmonics Volts, THD, Harmonic Amps, K factor Amps, Harmonic Watts, THd Watts, K factor Watts, Interharmonic Volts, Interharmonic Amps, Vrms, Arms (relative to fundamental or to total rms) Power and energy Vrms, Arms, Wfull, Wfund., VAfull, VAfund., VAharmonics, VAunbalance, var, PF, DPF, CosQ, Efficiency factor, Wforward, Wreverse Energy loss calculator Wfund, VAharmonics, VAunbalance, var, A, Loss Active, Loss Reactive, Loss Harmonics, Loss Unbalance, Loss Neutral, Loss Cost (based upon user defined cost / kWh) Inverter efficiency (requires optional dc current clamp) Wfull, Wfund, Wdc, Efficiency, Vdc, Adc, Vrms, Arms, Hz Unbalance Vneg%, Vzero%, Aneg%, Azero%, Vfund, Afund, V phase angles, A phase angles Inrush Inrush current, Inrush duration, Arms½, Vrms½ Monitor Vrms, Arms, harmonic Volts, THD Volts, PLT, Vrms½, Arms½, Hz, dips, swells, interruptions, rapid voltage changes, unbalance and mains signalling. All parameters are measured simultaneously in accordance with EN50160 Flagging is applied according to IEC61000-4-30 to indicate unreliable readings due to dips or swells Flicker (435-II and 437-II only) Pst(1min), Pst, Plt, Pinst, Vrms ½, Arms ½, Hz Transients (435-II and 437-II only) Transient waveforms 4x Voltage 4x Amps, triggers: Vrms ½, Arms ½, Pinst Mains Signaling (435-II and 437-II only) Relative signaling voltage and absolute signaling voltage averaged over three seconds for up to two selectable signaling frequencies UPower Wave (435-II and 437-II only) Vrms½, Arms½ W, Hz and scope waveforms for voltage amps and watts Logger Custom selection of up to 150 PQ parameters measured simultaneously on 4 phases Input characteristics Energy Loss Calculator Useful kilowatts (power) available Kilowatts made unusable by harmonics Kilowatts made unusable by unbalance issues Total billable kilowatt hours wasted Total cost of wasted kilowatt hours
- 96. 94 1735 Power Logger Included Accessories FS17X5-TF 4-phase flexible current clamp set, VL1735/1745 voltage lead set, Power Log software, color localization set, PC interface cable, international ac adapter, BC1735 battery charger, soft carrying case, printed English manual and multi-language manual on CD. Ordering Information Fluke 1735 Power Logger FS17X5-TF 4-phase thin flexi current clamp set, 3000 A 3000/6000A-TF-4 4-phase thin flexi current clamp set, 6000 A The Fluke 1735 Power Logger is the ideal tool for electricians and maintenance technicians for conducting energy studies and basic power quality logging. The 1735 is easy to set up with its color display and four included new thinner flexible current probes. The 1735 logs most electrical power parameters, harmonics and captures voltage events. View graphs and generate reports with the included Fluke Power Log software. • Record power and associated parameters for up to 45 days • Monitor maximum power demand over user-defined averaging periods • Prove the benefit of efficiency improvements with energy consumption tests • Measure harmonic distortion caused by electronic loads • Improve reliability by capturing voltage dips and swells from load switching • Confirm instrument setup easily with color display of waveforms and trends Specifications Display: VGA Graphic Color transmissive displays 320 x 240 pixels with additional background lighting and adjustable contrast, text and graphics in color Interface: USB with Mini USB B socket. Firmware updates are possible with the USB interface Housing: IP65; EN60529 (refers only to the main housing without the battery compartment) Power supply: NiMH battery-pack, with AC adapter (15 V to 20 V/0.8 A) Battery Life: Typical > 16 hours without backlight and > 6 hours with backlight high Operating temperature: 0°C to +40°C Size (HxWxD): 240 mm x 180 mm x 110 mm Weight: 1.7 kg, including battery Two Year Warranty (Check the Fluke web for detailed specifications) Recommended Accessories See page 98 for power quality current clamps Volts rms V-rms wye measurement ranges: 57 V/66 V/110 V/120 V/127 V/220 V/230 V/240 V/260 V/277 V/347 V/380 V/ 400 V/417 V/480 V AC V-rms delta measurement ranges: 100 V/115 V/190 V/208 V/220 V/380 V/400 V/415 V/450 V/480 V/600 V/660 V/ 690 V/720 V/830 V AC Amps rms Flexi set measurement range: 15 A/150 A/3000 A rms (at sine) Current clamp measurement range: 1 A/10 A Frequency Measurement range: 46 Hz to 54 Hz and 56 Hz to 64 Hz Harmonics and THD To 50th harmonic (< 50 % of nom) Power measurement (P - Active, S - Apparent, Q - Reactive, D - Distorting) Measuring range: see V-rms and A-rms measurement ranges Energy Measurement (kWh, KVAh, kVARh) Measuring range: see V-rms and A-rms measurement rangeso PF (Power factor) 0.000 to 1.000 Events Detection of voltage dips, voltage swells and voltage interruptions with a 10 ms resolution and measuring error of the half period sine wave of rms. General Memory 4 MB Flash memory, 3.5 MB for measuring data Sample rate 10.24 kHz Line frequency 50 Hz or 60 Hz, user-selectable, with automatic synchronization Customize the report generator to easily generate professional looking reports. Performs electrical load studies, energy consumption testing, and general power quality logging Conduct load studies for up to 45 days and view saved data on-screen or on a computer. Quantify energy consumption quickly on-screen or log to memory for extended periods. Access voltage and current harmonics up to the 50th. Capture voltage events using user-defined thresholds. Fluke 1735 View recorded data in simple graphs and tables with Fluke Power Log software.
- 97. 95 1740 Series Three-Phase Power Quality Loggers Memobox Included Accessories Fluke 1743/1744/1745: FS17XX IP65-TF thin flexible current clamp set (1743 & 1744), FS17X5-TF thin flexible current clamp set (1745), VL1735/1745 voltage lead set (1745 only), Power Log software, RS232 interface cable and RS232-USB adapter, 4 black dolphin clips, WC17XX color localization set, carrying bag, test certificate with measurement values, printed English manual and multi-language manual on CD. Basic models: Excl. current clamps FS17XX-TF Ordering Information Fluke 1743 Basic Power Quality Logger Memobox Fluke 1743 Power Quality Logger Memobox Fluke 1744 Basic Power Quality Logger Memobox Fluke 1744 Power Quality Logger Memobox Fluke 1745 Power Quality Logger Memobox FS17x5-TF 4-phase thin flexi current clamp set, 3000 A 3000/6000A-TF-4 4-phase thin flexi current clamp set, 6000 A Compact, rugged and reliable, the Fluke 1740 Series three-phase power quality loggers are everyday instruments for technicians who troubleshoot and analyze power distribution systems. Capable of simultaneously logging up to 500 parameters for up to 85 days and capturing events, the Fluke 1740 Series helps uncover intermittent and hard-to- find power quality issues. There are three models to choose from to meet your basic or advanced power logging needs. Fluke 1743: IP65 waterproof monitor for logging the most common power parameters including V, A, W, VA, VAR, PF, energy, flicker, voltage events and THD. Fluke 1744: Includes the same features as the Fluke 1743. In addition to common power parameters, the Fluke 1744 also measures voltage and current harmonics, interharmonics, mains signaling, unbalance, and frequency. Fluke 1745: Advanced IP50 power quality logger with the same measurement capability as the 1744, plus real-time LCD, five hour UPS. • Plug and play: Set up in minutes with automatic current probe detection and powering • Installs inside the cabinet: Compact, fully-insulated housing and accessories fit easily in tight spaces next to live power • Monitors power for the long-term: Data can be downloaded during recording without interruption • Measure voltage with premium accuracy: IEC61000-4-30 Class-A compliant voltage accuracy (0.1%) • Quickly validate quality of power: Assess power quality according to EN50160 power quality standard with statistical overview Specifications Fluke 1743 1745 1744 1743 Measurement of common power parameters: V, A, W, VA, VAR, PF, energy, flicker, voltage events (dips, swells, interruptions), and THD Measurement of voltage and current harmonics to the 50th, unbalance, frequency and mains signaling Dust/water resistance IP 50 IP 65 waterproof Display LED + LCD LED LED Memory 8 MB 8 MB 8 MB UPS ride-through > 5 hrs 3s 3s EN 50160 (Check the Fluke web for detailed specifications) See page 98 for power quality current clamps Fluke 1745 The included PQ Log software helps you to quickly identify the root cause of a disturbance. Power supply: 88 V … 660 V AC Safety: IEC/EN 61010-1 600 V CAT III, 300 V CAT IV, pollution degree 2, double insulation Housing: Fully insulated housing and accessories Operating temperature: 0 °C to 35°C Interface: RS 232, 9600 ... 115 000 Baud, automatic Baud rate selection, 3-wire communication Size: Fluke 1745: 282 mm x 216 mm x 74 mm; Fluke 1743/44: 170 mm x 125 mm x 55 mm Weight: Fluke 1745 – approx. 3 kg; Fluke 1743/44: approx. 2 kg Two Year Warranty Fluke 1744 Assess power quality and conduct long-term studies with ease
- 98. 96 1750 Three-Phase Power Recorder Included Accessories PDA and charger power plug adapters, 4 current probes, 5 test leads and clips, SD memory card., Fluke Power View and Fluke Power Analyze software, power cord with international plug set, Ethernet cable, color localization set, soft carrying case, Printed Getting Started manual, CD with software and users manual PDF Basic model: excl. 4 current probes Ordering Information Fluke 1750/B Three-Phase Basic Power Recorder Fluke 1750 Three-Phase Power Recorder With its exclusive threshold-free measurement system, the Fluke 1750 Power Recorder captures every measurement, every event, on every cycle, all the time. Outstanding accuracy and resolution provide complete visibility into your installation or distribution system. • Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc. • Quick and reliable configuration: PDA wireless “front panel interface” provides the ability to verify setup without a laptop along with a window into what the instrument is recording, even in awkward test locations. • Threshold-free setup: Apply thresholds after data is collected with Fluke Power Analyzer Software so there is no need to worry about missed information due to incorrect set-up. • Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time. • Intuitive PC software: Easily analyze data and generate reports. Automated EN50160 reporting and compliance. • Plug and play: Set up in minutes with selfidentifying current probes and single-lead voltage connections. • No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct. • Measure every parameter: Voltage and current on three phases, neutral, and ground. • 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events. • Quickly retrieve data: With included SD memory card or via the 100BaseT high- speed Ethernetv connection Specifications (Check the Fluke web for detailed specifications) View measurements real time with wireless PDA interface Safety: EN 61010-1 2nd Edition; 2000 Weight: 6.3 kg Size (H x W x D): 215 x 310 x 35 mm One Year Warranty Power quality measurement standards Conformance IEC 61999-1-4 Class 1, IEC 61000-4-30, IEEE519, IEEE1159, IEEE1459 and EN50160 Clock/calendar Leap years, 24-hour clock Real-time clock accuracy Not more than ± 1 s/day Internal memory capacity for data At least 1 GB Maximum recording period At least 31 days Measurement time control Automatic Maximum number of events Limited only by the size of the internal memory Power requirements 100 to 240 V rms ± 10 %, 47-63 Hz, 40 W Operating time during interruptions (internal UPS operation) 5 minutes per interruption, 60 minutes total operating time without recharging Recommended Accessories Model Description 3210-PR-TF 1000A Thin flexible current transformer 61 cm (24") (20 A - 1000 A) 3310-PR-TF 5000A Thin flexible current transformer 61 cm (24") (100 A - 5000 A) 3312-PR-TF 5000A Thin flexible current transformer 122 cm (48") (100 A - 5000 A) 3140-PR Clamp-on current transformer (2 A - 400 A) i40S-PR Clamp-on current transformer (0,1 A - 40 A) i4S-PR Clamp-on current transformer (0,01 A - 5 A) FLUKE-1750/SEAT-L Fluke Power Analyze – Additional SEAT LICENSE FLUKE-1750/SITE-L Fluke Power Analyze – Additional SITE LICENSE FLUKE-1750/CASE Hard Case CS1750 Soft Case HP IPAQ 2490 Additional Wireless Interface PDA FLUKE-1750/MC Additional 512 MB SD Memory Card Never miss capturing a disturbance On all inputs
- 99. 97 1760 Three-Phase Power Quality Recorder Topas Included Accessories 4 x TPS Flex 24-TF flexible current probe, 4 x TPS VoltProbe 600V, 2 GB internal flash memory, ST1760 standard Ethernet cable, RS232 interface cable and RS232-USB adapter, CS1760 crossover Ethernet cable, 1 mains cable, PC software on CD-ROM, WC17xx color localization set, GPS-time sync (1760TR only) CS 1750/1760 carrying bag, hardware and software manual Basic models: Excl. current clamps TPS Flex 24-TF Ordering Information Fluke 1760 Basic Power Quality Recorder Topas Fluke 1760TR Basic Power Quality Recorder Topas Fluke 1760 Power Quality Recorder Topas Fluke 1760TR Power Quality Recorder Topas The Fluke 1760 Three-Phase Power Quality Recorder is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium and low-voltage networks, the Fluke 1760 provides the flexibility to customize thresholds, algorithms, and measurement selections. It has 8 input channels (4 currents/4 voltages or 8 voltages), and captures the most comprehensive details on user selectable parameters. • GPS time synchronization: Correlate data with events or datasets from other instruments with precision • Uninterrupted power supply (40 minutes): Never miss important events - even record the beginning and end of interruptions and outages • 10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event • 2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time • Includes Comprehensive software: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode Features Fluke 1760 (Check the Fluke web for detailed specifications) The included PQ Analyze software provides a detailed overview of several power quality parameters on one dashboard according to the EN50160 power quality standard. Power supply: 83 V to 264 V, 45 to 65 Hz Battery pack: NIMH, 7.2 V, 2.7 Ah (up to 40 minutes back-up power supply) Safety: 600V CAT IV/1000V CAT III (Rated for use at the service entrance) Housing: Fully insulated robust plastic housing Operating temperature: 0 °C to 35°C Interfaces: Ethernet (100 MB/s), RS-232, external modem via RS-232 Size (HxWxD): 325 mm x 300 mm x 65 mm Weight: Approxiamtely 4.9 kg Two Year Warranty 1760 Basic 1760TR Basic 1760 1760TR Power quality statistics according to EN50160 Voltage event list (dips, swells and interruptions) Continuous recording of: Voltage Current Power P, Q, S Power factor kWh Flicker Unbalance Frequency Voltage and current harmonics to the 50th/ Interharmonics THD Mains signaling Triggered recordings Online mode (Oscilloscope, transients and events) Fast transient analysis up to 10 MHz 4 voltage probes 4 dual-range flexible current probes (1000 A / 200 A ac) GPS time sync receiver Memory 2 GB Flash memory Recommended Accessories (Check the Fluke web for complete accessory list) Model Description • TPS VOLTPROBE 10 V 10 V Voltage Probes (Range: 0.1 V to 17 V) • TPS VOLTPROBE 100 V 100 V Voltage Probes (Range: 1 V to 170 V) • TPS VOLTPROBE 400 V 400 V Voltage Probes (Range: 4 V to 680 V) • TPS VOLTPROBE 600 V 600 V Voltage Probes (Range: 10 V to 1000 V) • TPS VOLTPROBE 1 KV 1000 V Voltage Probes (Range: 10 V to 1700 V) • TPS FLEX 18-TF Flexible Current Probe (Range: 1 A to 100 A / 5 A to 500 A) • TPS FLEX 24-TF Flexible Current Probe (Range: 2 A to 200 A / 10 A to 1000 A) • TPS FLEX 36-TF Flexible Current Probe (Range: 30 A to 3000 A / 60 A to 6000 A) • TPS CLAMP 10 A / 1 A Clip-on Current Transformer (Range: 0.01 A to 1 A / 0.1 A to 10 A) • TPS CLAMP 50 A / 5A Clip-on Current Transformer (Range: 0.05 A to 5 A / 0.5 A to 50 A) • TPS CLAMP 200 A / 20 A Clip-on Current Transformer (Range: 0.2 A to 20 A / 2 A to 200 A) • TPS SHUNT 20 MA 20 mA ac/dc Shunt (Range: 0 to 55 mA) • TPS SHUNT 5 A 5 A ac/dc Shunt (Range: 0 to 10 A) Class-A compliance for the most demanding power quality tests
- 100. i3000flex-4PK (4xi3000sflex24) i400si430-FLEXI-TF-4PKi5sPQ3 98 Power Quality Current ClampsFlukemodelnumberi1A/10A CLAMPPQ3 i1A/10A CLAMPPQ4 i5A/50A CLAMPPQ3 i5A/50A CLAMPPQ4 i20A/200A CLAMPPQ3 i20A/200A CLAMPPQ4 3000/6000A-TF-4FS17X5-TFFS17xxIP65-TFi3000flex...4PKi400si430-FLEXI-TF-4PKi5sPQ3 Description3...phase 1A/10AMini current clampset 4...phase 1A/10AMini current clampset 3...phase 5A/50AMini current clampset 4...phase 5A/50AMini current clampset 3...phase 20A/200A Minicurrent clampset 4...phase 20A/2000A Minicurrent clampset 4Phase flexiset 4Phase flexiset, IP41 4Phase flexiset, IP65 4...phase 3000A Flexible current clampset Singlephase 400Acurrent clamp (4required) 4...phase 3000A Flexible current clampset 3...phase5A Current clamp set OldFlukemodel#CURRENT CLAMPS1A (EPO450A) MBXCLAMP 1A/10A+N (EPO451A) MBXCLAMP 5A/50A (EPO452A) MBXCLAMP 5A/50A+N (EPO453A) MBXCLAMP 20A/200A (EPO455A) MBXCLAMP 20/2000A+N (EPO456A) MBX LemFlex (15/150/3000) (EP0404A) MBX LemFlex (15/150/3000) (EP0404A) Fluke1735 Fluke174X Fluke43X Nominalcurrentrange(s)1A 10AAC 1A 10AAC 5A 50AAC 5A 50AAC 20A 200AAC 20A 200AAC 30A300A 3000A6000A AC 15A150A 1500A3000A AC 15A150A 1500A3000A AC 30A 300A 3000A 40A 400A 3000A5A Cont.ACcurrentrange10mA...1A 100mA... 10A 10mA...1A 100mA... 10A 50mA...5A 500mA... 50A 50mA...5A 500mA... 50A 200mA... 20A 2A...200A 200mA... 20A 2A...200A 0.guatda.com/cmx.p8...6.000A AC 450mA… 15A600mA… 150A6A… 1500A12A… 3000A 450mA… 15A600mA… 150A6A… 1500A12A… 3000A 1A...30A 1A...300A 1A...2400A 0.5A...40A 5A...400A 30A... 3000A 0.01A...6A Highestcurrent20A20A100A100A300A300A0.8A3300A3300A4000A1000A100kA70A Lowestmeasurablecurrent10mA10mA50mA50mA200mA200mA450mA450mA1A0.5A30A10mA Basicaccuracy(48...65Hz)1) 0.5%0.5%0.5%0.5%0.5%0.5%2%+2%position influence 2%+2%position influence 2%+2A2%+0.15A1%1% Usablefrequency40Hz...10 kHz 40Hz...10 kHz 40Hz...10 kHz 40Hz...10 kHz 40Hz...10 kHz 40Hz...10 kHz 40Hz…5kHz40Hz…5kHz10Hz...100 kHz 45Hz...3 kHz 10Hz...7 kHz 40Hz...5 kHz Requiresbattery Flexheadlength92cm61cm61cmClamp opening: 32mm 61cmClamp opening: 15mm Outputlevel(s)75mV/A75mV/A15mV/A15mV/A3.75mV/A3.75mV/A0.1mV/A0.1mV/A10mV/A 1mV/A 0.1mV/A 10mV/A 1mV/A 0.085mV/A @50Hz 400mV/A Outputcable(m)2222224222.12.52.52.5 SafetyratingCATIII600VCATIII600VCATIII600VCATIII600VCATIII600VCATIII600VCATIII1000V CATIV600V CATIII1000V CATIV600V CATIII1000V CATIV600V CATIII600VCATIII1000V CATIV600V CATIII1000V CATIV600V CATIII600V ConnectionOne connector One connector One connector One connector One connector One connector One connector One connector One connector 4xBNC4xBNC4xBNC3xBNC BNCtobananaadaptersincludedn/an/an/an/an/an/an/an/an/a 1 Basicaccuracy:%readingplusfloorspec. n/a=notapplicable
- 101. 99 Norma 4000/5000 Power Analyzers The compact Fluke Norma Series Power Analyzers provide the latest measurement technology to assist engineers with the development and testing of motors, inverters, lighting, power supplies, transformers and automotive components. Based on a patented, high-bandwidth architecture, the instruments deliver high-precision measurements of single or three-phase current and voltage, harmonics analysis, Fast Fourier Transformation (FFT) analysis, as well as calculations of power and other derived values. A unique user-configurable system design with plug-in power phases and other optional modules provides the flexibility to meet a variety of application measurement requirements. Recorded data and waveforms can be viewed clearly in the large color display and easily downloaded to a PC for analysis and report writing. The Series consists of the Fluke Norma 4000 Three-Phase Power Analyzer and the Fluke Norma 5000 Six-Phase Power Analyzer. These rugged analyzers provide unmatched price performance for easy and reliable use in the field, or as a bench unit in laboratories and on test benches. • Simple user interface ensures easy, intuitive operation • Unique user-configurable modular design • Simultaneous parallel acquisition of all phases • Voltage, current and power harmonics up to the 40th • Includes FFT analysis, vector diagram display, recorder function, and Digital Oscilloscope (DSO) mode • User selectable average time – from 15ms to 3600s • Expandable on-board memory for storage of measured values Specifications (Check the Fluke web for detailed specifications) Operating temperature: + 5 °C to 35 °C Storage temperature: - 20 °C to 50 °C Climatic class: KYG DIN 40040, maximum 85% relative humidity, non-condensing. Included Accessories Power Supply Cable, RS232 Interface and USB adaptor for Data Download, Fluke NormaView PC Software, User’s Manual, Test Certificate, and Calibration Values. Ordering Information Fluke Norma 4000 Three-Phase High Precision Power Analyzer Fluke Norma 5000 Six-Phase High Precision Power Analyzer Fluke Norma Series Power Analyzers Fast Fourier Transformation (FFT) analysis Fluke Norma 4000 Housing: Solid metal case Safety: EN 61010-1 / 2nd Edition, 1000 V CAT II (600 V CAT III) Two Year Warranty Fluke Norma 4000 Fluke Norma 5000 Number of Phases 1 or 3 3, 4 or 6 Weight Approx. 5 kg Approx. 7 kg Size (HxWxD) 15 cm x 23.7 cm x 31.5 cm 15 cm x 44.7 cm x 31.5 cm On-board Printer No Yes (optional) Display Color, 5.7“ / 144 mm - 320 x 240 pixel Bandwidth dc to 3 MHz or dc to 10MHz depending on input module Basic Accuracy 0.2%, 0.1% or 0.03% depending on input modules Sampling Rate 0.33 MHz or 1 MHz depending on input modules Voltage Input Range 0.3 V to 1000 V Current Input Range (direct, not via shunt) 0.03 mA – 20 A depending on input module Memory for Configurations 4 MB, expandable to 128 MB Memory for Settings 0.5 MB Fast Fourier Transformation (FFT) To the 40th harmonic RS232 Interface Standard PI1 Process Interface (8 analog/impulse inputs and 4 analog outputs) Optional IEEE 488.2 /GPIB Interface (1 MBit/s Ethernet / 10 MBit/s or 100 Mbit/s) Optional Fluke NormaView PC Software (for data download, analysis & report writing) Standard Fluke Norma 5000 Digital Oscilloscop (DSO) mode Vector Display Recorder function Reliable, highly accurate measurements for the test & development of power electronics
- 102. 100 Norma 4000/5000 Power Analyzer Accessories Fluke Norma 4000 (rear view) Fluke Norma 5000 (rear view) 3024770 3024812 3024820 3024835 Channel PP42 PP50 PP54 PP64 Accuracy 0.2% (0.1% rd + 0.1% rg) 0.1% 0.05% rd + 0.05% rg 0.03% (0.02% rg + 0.01% rg) Current range 20 A 10 A 10 A 10 A Sampling rate 341 kHz 1 MHz 341 kHz 341 kHz Bandwidth 3 MHz 10 MHz 3 MHz 3 MHz Shunts The input modules can take up to 10 A or 20 A directly or measure current via wideband precision shunts. The available range of shunts enables measurements up to 1500 A and can be used in conjunction with all of the available input modules. Cables & Adaptors Printer Accessories 3024677 32 A Planar Shunt 3024689 Cables for 32 A Planar Shunt 3024886 10 A Triaxial Shunt with Cables (0.333 ., 0 to 0.5 MHz) 3024899 30 A Triaxial Shunt with Cables (0.010 ., 0 to 0.5 MHz) 3024847 100 A Shunt with Cables (0.001 Ω, 0 to 0.5 MHz) 3024858 150 A Shunt with Cables (0.5 mΩ, 0 to 0.5 MHz) 3024864 300 A Shunt with Cables (0.1 mΩ, 0 to 1 MHz) 3024873 500 A Shunt with Cables (0.1 mΩ, 0 to 0.2 MHz) 3024692 LG Shunt Cables for High Current Shunts 3024661 Measurement Cable Set (for one power phase) 3024704 Fluke Norma WYE Adaptor (external accessory box) 3024650 Printer Cable for Fluke Norma 5000 (RS232-Centronics) All accessories have a two-year warranty. Optional shunts for Fluke Norma Series Power Analyzers 32 A Planar Shunt Power Phases The Fluke Norma 4000 Power Analyzer can be equipped with up to three power phases and the Fluke Norma 5000 Power Analyzer can be equipped with up to six power phases. Users can select the power phase best suited for their application. Specifications vary depending on the model of the power phase. Each plug-in power phase consists of a voltage and a current measurement channel. Each measuring channel is available for each basic unit. Power Phase Overview
- 103. 101 Fluke process calibration tools include a full range of calibrators and troubleshooting tools for instrument technicians working in the process industries. The range of process calibrators include: Documenting Process Calibrators, Multifunction Process Calibrators, single function and multifunction temperature calibrators, a variety of mA loop calibrators and a range of intrinsically safe products. Field Calibrators
- 105. 103 750 Series Documenting Process Calibrators 700P27 See page 112 Recommended Accessories Included Accessories Stackable test leads (3 sets), TP220 test probes (3 sets) with extended tooth” alligator clips (3 sets), AC280 hook clips (2 sets), BP7240 Li-ion battery pack, BC7240 battery charger, C799 field soft case, USB communication cable, getting started guide, instruction manual on CDROM, NIST traceable certificate of calibration, DPCTrack™ 2 sample software that enables upload and printing of calibration records. HART communication cable (754 only). Ordering Information Fluke 753 Documenting Process Calibrator Fluke 754 Documenting Process Calibrator 700 TLK Process test lead kit BP7240 753/754 Spare battery 750 SW DPC/Track2 BC7240 753/754 Battery charger/eliminator 754HCC 754 HART communication cable 80PK-25 See page 128 80PK-8 See page 128 TL220-1 See page 122 C799 See page 130 Function Measure Sourcing Voltage DC 0.02% + 0.005 mV 0.01% + 0.005 mV Current DC 0.01% + 5 μA 0.01% + 0.003 mA Resistance 0.05% reading + 50 mΩ 0.01% output + 10 mΩ Frequency 0.05 Hz 0.01 Hz Thermocouples 0.3ºC 0.2ºC RTDs 0.07 ºC 0.06 ºC Pressure To 0.05% of full scale. See Pressure Module specifications. Specifications (Check the Fluke web for detailed specifications) Operating temperature: -10º C to 50º C Storage temperature: -20º C to 60º C Safety: CAT II 300V Battery Life: Typically over eight hours Internal Battery Pack: li-ion, 7.2V, 4400 mAh, 30 Wh Fluke 754 Fluke 753 Battery Replacement: Via snap-shut door wit- hout opening calibrator; no tools required Weight: 1.2 kg Size (HxWxD): 245 mm x 136 mm x 63 mm Three Year Warranty Whether you’re calibrating instruments, troubleshooting a problem or running routine maintenance, Fluke 750 series process calibrators can help you get the job done faster. It does so many different tasks, so quickly and so well, it’s the only process calibrator you need to carry. • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters • Power transmitters during test using loop supply with simultaneous mA measurement • Measure/source pressure using any of 29 Fluke pressure modules • Measure and source simultaneously with one compact, rugged, reliable tool • Create and run automated as-found/ as-left procedures to satisfy quality programs or regulations. Record and document results • Advanced features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more • Control the temperature of selected Hart Scientific Dry Blocks • Handle fast pulsed RTD transmitters and PLCs in RTD source mode with 1 ms response time • English, French, German, Italian, and Spanish languages • Three-year warranty 753: A complete documenting calibrator The 753 Documenting Process Calibrator automates calibration procedures and captures your data. Use the PC interface for downloading procedures, lists, and instructions to the 753 and for uploading data for printing, archiving and analysis. 754: Get HART-ability The 754 offers all of the capabilities of the 753, plus integrated HART communication capability. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. Instrumentation Management Software The Fluke 753 and 754 are compatible with Fluke 700SW DPC/TRACK software and with software from Cornerstone, Fisher-Rosemont, Honeywell, Yokogawa, Prime Technologies and On Time Support. Work smarter. Work fasterNew
- 106. 104 725/725Ex/726 Multifunction Process Calibrators 700P27 See page 112 (Not for hazardous zones) Specifications 725/725Ex/726 Multifunction Process Calibrators • Two separate channels; measure, source and view process signals simultaneously • Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters • Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters • Measure or *source pressure using any of 29 Fluke 700Pxx Pressure Modules • Source mA with simultaneous pressure measurement to conduct valve and I/P tests • Perform fast linearity tests with auto step and auto ramp features • Power transmitters during test using 24 V loop supply and simultaneous mA measurement • Store frequently-used test setups for later use • For 725Ex version see also page 118 and 119 726 Precision Multifunction Process Calibrator Additional features: • More precise measurement and calibration source performance, accuracies of 0.01% • Transmitter error% calculation • Memory storage for up to 8 calibration results • Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing • HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation • Integrated pressure switch test allows you to capture the set, reset and deadband of a switch • Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement Maximum voltage: 30V Operating temperature: 10°C to 55°C Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022: 1994 Class B Fluke 725 Size (HxWxD): 200 mm x 96 mm x 47 mm Weight: 0.65 kg Battery: Four AA alkaline batteries. Battery life: 25 hours typical; battery door Warranty: Three years Included Accessories Test Leads, AC172 Test Clips, one pair of stackable test leads, user’s Manuals on CD-ROM (725Ex also includes CCD control drawing, Statement of Quality Assurance Practices, NIST Traceable calibration certificate) Ordering Information Fluke 725 Multifunction Process Calibrator Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator Fluke 726 Precision Multifunction Process Calibrator Simultaneous Function Capability Channel A Channel B 24.000 mA DC M M or S 24.000 mA DC with 24 V loop supply M M or S 100.00 mV DC M or S 30.000V DC measure M M or S 20.000V DC Measure 10.000V DC Source 20.000V DC Source M or S 15 to 3200 Ohms 5 to 4000 Ohms M or S Thermocouple J, K, T, E, R, S, B, M, L, U, N, XK, BP M or S RTD Cu 10, Ni120; Pt100 (392); Pt100 (JIS); Pt100, 200, 500, 1000 (385) M or S Pressure (requires Fluke 700 PXX Modules) M M used as S Frequency; 10 kHz; (15 kHz) M or S Function Measure or Source Range or Type Resolution Accuracy Notes Voltage 0 to 100 mV 725: 0 to 10V (source) 0 to 20V (source) 725/726: 0 to 30V (measure) 0.01 mV 0.001 V 0.001 V 0.001 V 0.01% 0.02% Rdg + 2 LSD Max load, 1 mA mA 0 to 24 0.001 mA 0.01%; 0.02% Rdg +2 LSD Max load, 725/726: 1000Ω 725Ex: 250Ω mV (TC terminals) -10.00 mV to +75.00 mV 0.01 mV 0.01% 0.02% of range + 1 LSD Ohms 15Ω to 3200Ω 5Ω to 4000Ω 0.01Ω to 0.1Ω 0.10Ω to 1.0Ω 0.015% Hz - CPM 2.0 to 1000 CPM 1 to 1100 Hz 1.0 to 10.0 kHz 10.0 to 15.0 kHz 0.1 CPM 1 Hz 0.1 kHz 0.1 kHz ±0.05% ±0.05% ±0.25% ±0.05% Source; 5V p-p 1V - 20 V p-p squarewave, -0.1 V offset Loop Supply 725/726: 24 V DC 725Ex: 12 V DC N/A 10% T/C J, K, T, E, L, N, U, XK 0.1 ºC, 0.1 ºF to 0.7 ºC to 0.2 ºC T/C B, R, S, BP 1 ºC, 1 ºF to 1.7 ºC to 1.2 ºC RTDs Cu (10), Ni 120 (672) Pt 100, 200, 500, 1000 (385) Pt 100 (3916), Pt 100 (3926) 0.01 ºC 0.01 ºF 0.1 ºC, 0.1 ºF to 0.15 ºC to 0.2 ºC Fluke 725Ex Fluke 726 Features M = Measure S = Source/Simulate Unique 726 features are in bold 725Ex: ATEX cerfified (Ex ATEX II IG EEX 1a IIB 171°C) Recommended Accessories TPAK See page 132 80PK-27 See page 128 TL220-1 See page 122 C125 See page 130 More calibration power! *Pressure pump required Unique 726 features are in bold
- 107. 105 724 Temperature Calibrator 80PK-3A See page 128 Features The Fluke 724 Temperature Calibrator is a powerful yet easy-to-use calibrator. Use the measure and source functions to test and calibrate almost any temperature instrument. • Easy to read dual display lets you view input and output simultaneously • Measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters • Source/simulate thermocouples, RTDs, volts, and ohms to calibrate transmitters • Perform fast linearity tests with 25% and 100% steps • Execute remote tests with auto step and auto ramp • Power transmitters during test using loop power supply with simultaneous mA measurement • Store frequently-used test setups for later use Fluke 724 Included Accessories Test Leads, AC172 Test Clips, one pair of stackable test leads. Ordering Information Fluke 724 Temperature Calibrator Recommended Accessories 80PK-25 See page 128 TL81A See page 121 TL220-1 See page 122 C25 See page 130 Maximum voltage: 30V Operating temperature: -10°C to 55°C Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022: 1994 Class B Size (HxWxD): 200 mm x 96 mm x 47 mm Weight: 0.65 kg Battery: Four AA alkaline batteries Battery life: 25 hours typical; battery door Three Year Warranty Function Measure or Source Range Resolution Accuracy Notes Voltage 0 to 100 mV 0 to 10V (source) 0 to 30V (measure) 0.01 mV 0.01 V 0.001 V 0.02% Rdg + 2 LSD Max load, 1 mA mA (measure) 0 to 24 mA 0.001 mA 0.02% Rdg +2 LSD Max load, 1000Ω mV -10.00 mV to +75.00 mV 0.01 mV 0.025% of range + 1 LSD Resistance 0Ω to 3200Ω (measure) 15Ω to 3200Ω (source) 0.01Ω to 0.1Ω 0.10Ω to 1.0Ω Loop Supply 24V DC N/A 10% Thermocouples J, K, T, E, L, N, U 0.1 ºC to 0.7 ºC Thermocouples B, R, S 1 ºC to 1.4 ºC RTDs Ni120 (672) Pt 100, 200, 500, 1000 (385) Pt 100 (3916) Pt 100 (3926) 0.1 ºC to 0.2 ºC Simultaneous Function Capability Channel A Channel B 24.000 mA DC M 24.000 mA DC with 24V loop supply M 100.00 mV DC M or S 30.000V DC Measure M 20.000V DC Measure 10.000V DC Source M or S 0 to 3200 Ohms M or S Thermocouple J, K, T, E, R, S, B, L, U, N M or S RTD Ni120; Pt100 (3926); Pt100 (JIS); Pt100, 200, 500, 1000 (385) M or S Specifications M = Measure S = Source/Simulate The temperature solution
- 108. 106 712/714 Temperature Calibrators 80PK-24 (714) See page 128 The Fluke 710 Series Process Calibrators offer clear new choices in single-function calibrators. Whatever you want to measure - temperature, pressure or basic electrical parameters - you’ll find one of these easy-to-carry handheld tools gives you exactly the functions you need. They combine the rugged, ready-for-action package of the proven Fluke 80 Series DMMs with the easy-to-use pushbutton operation of the multifunction Fluke 740 Series Documenting Process Calibrators. These calibrators are EMI tolerant, dust and splash resistant, and have a removable battery door for quick battery changes. 712 RTD Calibrator • Measure temperature from RTD output • Simulate RTD output • Rosemount pulsed RTD transmitter compatible • Operates with seven types of RTDs • Measure additional RTDs using Ohms measurement function • Simulate additional RTDs using Ohms source function • °F or °C selectable • Four shrouded banana jacks 714 Thermocouple Calibrator • Measure temperature from TC output • Simulate TC output • Operable with nine types of thermocouples • Calibrate linear TC transmitter with mV source function • Selectable °F or °C • Thermocouple mini-jack termination • Available as accessories; Fluke 700 TC1 and TC2 Thermocouple Mini-plug Kits Fluke 714 Included Accessories Yellow Holster (H80M excl. TPAK), Test Leads and AC172 Alligator Clips (excluding model 714), single 9V alkaline battery and Instruction Sheet (14 languages) Ordering Information Fluke 712 RTD Calibrator Fluke 714 Thermocouple Calibrator Recommended Accessories TL220-1 (714) See page 122 TL970 See page 121 C550 See page 130 C25 See page 130 Maximum voltage: 30 V Operating temperature: -10°C to 55°C Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022: 1994 Class B Size (HxWxD): 201mm x 98 mm x 52 mm Weight: 0.6kg Battery: 9V alkaline Battery Life: 4 to 20 hours, typical, depending on functions used Three Year Warranty Model Function Range Resolution Accuracy Notes Fluke 712 Measure/ simulate RTD -200 to 800ºC (Pt 100) 0.1ºC, 0.1ºF 0.33ºC, 0.6ºF (Pt 100) Pt; 100, 200, 500, 1000 (385); Pt 100 (3926); Pt 100 (3916) JIS; Ni 120 (672) Measure/ simulate Resistance 15 Ω to 3200 Ω 0.1 Ω 0.1 Ω to 1 Ω Fluke 714 Measure/ simulate Thermocouple -200 to 1800ºC, depending on type (K, -200 to 1370ºC) 0.1–C or ºF (1ºC or ºF; BRS) 0.3ºC to 10 μV 9 TC types: J K T E R S B per NIST 175 and ITS-90, L U per DIN 43710 and IPTS-68 Measure/ simulate mV -10 to 75 mv 0.01 mV 0.025% + 1 count Specifications Fluke 712 The clear choice
- 109. 107 9140 Series Field Metrology Wells 4180 Series Infrared Calibrators 9142, 9143, 9144 Field temperature calibration with precision and speed The Fluke 9140 series Field Metrology Wells extend high performance portable temperature calibration to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance. Offering a broad temperature covered by three models you can easily cover varied contact temperature probe workloads between -25 ºC to 660 ºC. They are quick to reach temperature set points, yet they are stable, uniform, and accurate. These industrial temperature calibrators are perfect for performing transmitter loop calibrations, comparison calibrations, or simple checks of thermocouple sensors. Adding the process option means there is no need to carry additional tools into the field. The optional built-in two-channel readout measures resistance, voltage, and 4–20 mA current with 24V loop power. • Lightweight, portable, and fast • Cool to –25 °C in 15 minutes and heat to 660 °C in 15 minutes • Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current • On-board automation and documentation • Metrology performance in accuracy, stability, uniformity, and loading 4180/4181 IR Calibrators True metrology solution for infrared Calibration Now it’s easy to increase your IR temperature measurement accuracy in the lab or the field with the new 4180/81 Precision Infrared Calibrators from Fluke’s Hart Scientific division. Their accredited calibrations from Hart’s IR laboratory help to ensure traceable, consistent measurements accurate to +0.25 ºC. Select from eight preconfigured Fluke thermometer settings or set up your own. The large 152 mm (6 inch) target helps eliminate errors. So whether you’re measuring from -15 ºC to 120 ºC (4180) or from 35 ºC to 500 ºC (4181) you’ll get a 4:1 TUR. • High performance, designed for industrial use • Guaranteed accuracy specifications • Excellent stability and uniformity • Large 152 mm targets capture peripheral vision of IR thermometer • Portability and speed for field use - including convenient bail handle • Simulates individual IR thermometer emissivity settings • No difficult infrared calculations • Fluke and Raytek thermometer calibration points can be loaded directly into the calibrator for convenience • Calibrated in accredited infrared laboratory by Hart Scientific, the experts in temperature calibration • At least 4 times more accurate than most IR thermometers • Calibration includes uncertainties from surface heat loss and emissivity Fluke 9142/9143/9144 Included Accessories 914x: 9930 Interface-it Software, Report of Calibration, Test leads (P Version Only), 6-pin DIN Connector for Reference Probe (P Version Only) Ordering Information Fluke 4180 Precision Infrared Calibrator, –15 °C to 120 °C Fluke 4181 Precision Infrared Calibrator, 35 °C to 500 °C Fluke 4180-CASE Carrying Case, 4180, 4181 Fluke 4180-DCAS Carrying Case with wheels, 4180, 4181 Fluke 9142-X Field Metrology Well, Low Temp Fluke 9143-X Field Metrology Well, Mid Temp Fluke 9144-X Field Metrology Well, High Temp Add -P to order optional Process option (914X-X-P). X represents insert type, A, B, C, D, E or F 9142/9143/9144: Size (HxWxD): 290 x 185 x 295 mm Weight: 9142: 8.2 kg, 9143: 7.3 kg, 9144: 7.7 kg One Year Warranty 4180/4181 Size (HxWxD): 241 x 356 x 241 mm Weight: 4180: 9.1 kg, 4181: 9.5 kg One Year Warranty 9142 9143 9144 4180 4181 Temp Range –25 °C to 150 °C 33 °C to 350 °C 50 °C to 660 °C –15 °C to 120 °C 35 °C to 500 °C Stability ±0.01 °C Full Range ±0.02 °C at 33 °C ±0.02 °C at 200 °C ±0.03 °C at 350 °C ±0.03 °C at 50 °C ±0.04 °C at 420 °C ±0.05 °C at 660 °C ±0.05 °C at 0 °C ±0.2 °C at 250 °C Uniformity ±0.01 °C Full Range ±0.01 °C at 33 °C ±0.015 °C at 200 °C ±0.02 °C at 350 °C ±0.02 °C at 50 °C ±0.05 °C at 420 °C ±0.15 °C at 660 °C ±0.1 °C at 0 °C ±0.1 °C at 35 °C Target Size diameter N/A N/A N/A 152.4 mm diameter 152.4 mm Emissivity Range N/A N/A N/A Preset to 0.95 Preset to 0.95 NIST Accredited Calibration YES YES YES YES YES Specifications Fluke 4180/4181 Field Metrology Wells and infrared calibration targets For the complete line of Fluke heat sources check the Fluke website
- 110. 108 717/718/718Ex/719 Pressure Calibrators 700 LTP-1 See page 112 717 Pressure Calibrators • Measure pressure, 0.025% of full scale with internal sensor - 1/8 NPT pressure fitting - Compatible with non-corrosive gasses and liquids • Pressure measurement to 690 bar • Wide range of selectable measurement units for pressure • Current measurement with 0.015% accuracy and 0.001mA resolution • Simultaneous pressure and current measurement for easy P/I testing • 24 volt loop power supply • Zero, Min-Max, Hold and Damping functions • Pressure switch test captures set, reset and deadband values 718 Pressure Calibrators Same features as Fluke 717 plus: • Newly designed built-in pressure/ vacuum hand pump with vernier and bleed valve helps protect the pump from damage and is easier to clean For 718Ex Intrinsically Safe Pressure Calibrator see chapter on Ex products in this catalog. 719 Electric Pressure Calibrator Same features as Fluke 717 plus: • Electric pump for one handed operation • mA source for calibrating I/P devices and 4-20 mA I/O • Best in class pressure measurement accuracy of 0.025% • Programmable pump limit settings can eliminate overpressurization - set ‘pump to’ pressure values Included Accessories Fluke 717, 718, 718Ex and 719: Yellow Holster (718Ex red holster), Test leads, AC172 Alligator Clips, Single 9V alkaline battery (two 9V batteries in 718 and 719), User manual on CD ROM. 719 also includes: Push fit connectors, Translucent test hose. Ordering Information Fluke 719 30G Electric Pressure Calibrator Fluke 719 100G Electric Pressure Calibrator Fluke 718 1G Pressure Calibrator Fluke 718 30G Pressure Calibrator Fluke 718 100G Pressure Calibrator Fluke 718 300G Pressure Calibrator Fluke 718Ex 30G Intrinsically Safe Pressure Calibrator Fluke 718Ex 100G Intrinsically Safe Pressure Calibrator Fluke 717 1G Pressure Calibrator Fluke 717 15G Pressure Calibrator Fluke 717 30G Pressure Calibrator Fluke 717 100G Pressure Calibrator Fluke 717 300G Pressure Calibrator Fluke 717 500G Pressure Calibrator Fluke 717 1000G Pressure Calibrator Fluke 717 1500G Pressure Calibrator Fluke 717 3000G Pressure Calibrator Fluke 717 5000G Pressure Calibrator Fluke 717 10000G Pressure Calibrator Recommended Accessories 700P27 See page 112 TL220-1 See page 122 C125 (717) See page 130 C43 (718) See page 130 717 Size (HxWxD): 201 mm x 98 mm x 52 mm Weight: 0.6 kg Three years Warranty 718/718Ex Size (HxWxD): 216 mm x 94 mm x 66 mm Weight: 0.992 kg Warranty: Three years (Pump one year) 719 Size (HxWxD): 210 mm x 87 mm x 60 mm Weight: 0.912 kg Three Year Warranty (Pump one year) Specifications Pump up the pressure For Fluke 717/718/719 models: Supported Pressure Units; psi, in. H2 O(4°C), in. H2 O(20°C), cm H2 O(4°C), cm H2 O(20°C), bar mBar, kPa, inHg, mmHg, kg/cm2 Functions: Zero, Min, Max, Hold, Damp functions Max. Voltage: 30 V Operating temperature: -10°C to 55°C Safety: CSA C22.2 No. 1010.1:1992 EMC: EN50082-1:1992 and EN55022:1994 Class B Fluke 717: For use with non corrosive gasses and liquids Fluke 718/719: For use with Dry Air only (Not for hazardous zones) Fluke 718 Fluke 719 Fluke 717 Fluke 718Ex Model Range Resolution Over Pressure 719 30G -850 mbar to 2 bar 0.1 mbar Over pressure 2xFS 719 100G -850 mbar to 7 bar 1 mbar Over Pressure 2xFS 718 1G -68.9 mbar to 68.9 mbar 0.001 mbar Over Pressure 5xFS 718 30G -850 mbar to 2 bar 0.1 mbar Over Pressure 2xFS 718 100G -850 mbar to 7 bar 0.1 mbar Over Pressure 2xFS 718 300G -850 mbar to 20 bar 1 mbar Over Pressure 375 PSI, 25 bar 717 1G -68.9 mbar to 68.9 mbar 0.001 mbar Over Pressure 5xFS 717 15G -830 mbar to 1 bar 0.01 mbar Over Pressure 2xFS 717 30G -850 mbar to 2 bar 0.1 mbar Over Pressure 2xFS 717 100G -850 mbar to 7 bar 0.1 mbar Over Pressure 2xFS 717 300G -850 mbar to 20 bar 1 mbar Over Pressure 375 PSI, 25 bar 717 500G 0 mbar to 34.5 bar 1 mbar Over Pressure 2xFS 717 1000G 0 mbar to 69 bar 1 mbar Over Pressure 2xFS 717 1500G 0 bar to 103.4 bar 0.01 bar Over Pressure 2xFS 717 3000G 0 bar to 207 bar 0.01 bar Over Pressure 2xFS 717 5000G 0 bar to 345 bar 0.01 bar Over Pressure 2xFS 717 10000G 0 bar to 690 bar 0.01 bar Over Pressure 2xFS
- 111. 109 705/707/707Ex/715 Loop Calibrators T PAK (715) See page 132 Fluke 705 TP920 See page 121 TL220-1 See page 122 C25 (715) See page 130 C12A (705/707) See page 130 Functions Voltage measurement 705/707/707 Ex 715 Range 0-28 V DC 0-200 mV, 0-20 V Resolution 1 mV 10 μV 1 mV Accuracy 705: 0.025% Rdg + 2 LSD 707/707Ex: 0.015% Rdg + 2 LSD 0.01% Rdg + 2 LSD Specifications Fluke 705, 707, 707Ex Maximum voltage: 30 V (28 V - 707Ex) Operating temperature: -10 to 55°C Safety: CSA C22.2 No. 1010.1: 1992 EMC: EN50082-1:1992 and EN55022: 1994 Class B Size (HxWxD): 164 mm x 75 mm x 47 mm; Weight: 0.35 kg Battery: One 9 V alkaline Battery life: 18 hours typical, at 12 mA Three Year Warranty Fluke 715 715 Size (HxWxD): 201 mm x 98 mm x 52 mm Weight: 0.6 kg Battery: One 9V alkaline Battery life: 4 to 20 hours Three Year Warranty 705 Loop Calibrator • Simultaneous mA and % • mA accuracy of 0.02% • Measure, source and simulate mA • Push button 25% steps for fast, easy linearity checks • “Span Check” for fast confirmation of zero and span • Selectable slow ramp, fast ramp, and step function • 24 volt internal loop supply • 0 - 20 mA or 4 - 20 mA default start up modes 707 Loop Calibrator • Features of the Fluke 705 • “Quick Click” detented rotary knob for one handed operation • Higher accuracy: 0.015% • Mains Voltage Input protection • 250 Ohm loop resistance for with Hart instrumentation 715 Volt/mA Calibrator • Measure loop current (0-20 mA, 4-20 mA) signals with 0.015% accuracy and 0.001 mA resolution • Measure voltage output process signals from PLCs, transmitters • Source or simulate 24 mA loop current • Source voltage to 100 mV or 10 V • 24 V loop supply with simultaneous current measurement 707Ex Intrinsically Safe Loop Calibrator • Same features as Fluke 707 • For use in explosion endangered areas • ATEX certified ( II 2 G Eex ia IIC T4) 4-20 mA, source, measure, simulate Fluke 707 Fluke 707Ex Current sourcing Range 0-20 mA or 4-20 mA1 0-20 mA or 4-20 mA1 Accuracy 705: 0.025% Rdg + 2 LSD 707/707Ex: 0.015% Rdg + 2 LSD 0.015% + 2 LSD Drive capability 705: 1000 Ω @ 24 mA 707: 1200 Ω @ 24 mA 707Ex: 700 Ω 20 mA 1000 Ω @ 24 mA Loop power while measuring mA 24 V 24 V Voltage sourcing N/A 0-100 mV or 0-10 V Display current and % of span Yes mA or % Auto step, auto ramp Yes Yes Span Check Yes Yes Current measurement Range 0-24 mA 0-24 mA Resolution 0.001 mA 0.001 mA Accuracy 705: 0.025% Rdg + 2 LSD 707/707Ex: 0.015% Rdg + 2 LSD 0.015% Included Accessories Fluke 705/707: C10 Yellow Holster, Test Leads, AC172 Alligator Clips, Single 9V alkaline battery, Instruction Sheet Fluke 707Ex: Red Ex-holster, Test Leads, AC172 Alligator Clips, Single 9V alkaline battery, Instruction Sheet Fluke 715: Yellow Holster (H80M excl. TPAK), Test Leads and AC172 Alligator Clips, Single 9V alkaline battery, Instruction Sheet Ordering Information Fluke 705 Loop Calibrator Fluke 707 Loop Calibrator Fluke 707Ex Intrinsically Safe Loop Calibrator Fluke 715 Volt/mA Calibrator 1 will over-range to 24 mA
- 112. 110 771, 772 and 773 mA Process Clamp Meters Fluke 773 Fluke 771 Included Accessories Fluke 771: soft carrying case and user’s manual Fluke 771 + 772: plus test leads, AC172 alligator clip set and TL940 mini-hook test lead set Ordering Information Fluke 771 Milliamp Process Clamp Meter Fluke 772 Milliamp Process Clamp Meter Fluke 773 Milliamp Process Clamp Meter Specifications Features Size (HxWxD): 771: 212 mm x 59 mm x 38 mm 772 + 773: 248 mm x 76 mm x 41 mm Weight: 771: 0.26 kg 772 + 773: 0.42 kg Battery: 771: 2x 1.5V Alkaline, IEC LR6 772 + 773: 4x 1.5V Alkaline, IEC LR6 Battery Life: 771: 20 hours typical 772 + 773: 12 hours @ 12 mA source into 500 ohms IP Rating: IP 40 Warranty: 3 years, 1 year on mA clamp accessory and cable Fluke 771, 772 and 773 • Measure 4 to 20 mA signals without ”breaking the Loop,” save time and money troubleshooting 4 to 20 mA signals Fluke 772 and 773 • Source 4 to 20 mA signals for testing control system I/O or I/Ps • Simulate 4 to 20 mA signals for testing control system I/O • Measure 4 to 20 mA signals with in- circuit measurement • Power a transmitter with the 24 V loop power supply • Automatically ramp and step change the 4 to 20 mA output for remote testing Fluke 773 • DC voltage measurement to verify 24 V power supplies or voltage I/O signals • Source dc voltage to test voltage input devices • Scaled mA output signal enables a logging DMM (289) to record 4 to 20 mA signal without breaking the loop • mA in/out: simultaneously source a mA signal while measuring a mA signal with the clamp mA measurements without breaking the loop. Save time. Save money. Function Resolution and range Accuracy Notes 771, 772, 773 mA measurement 0 to 20.99 mA 0.2 % + 5 counts Measured by clamp 21.0 mA to 100.0 mA 1 % + 5 counts 772 and 773 mA measurement 0 to 24.00 mA 0.2 % + 2 counts Measured in series with test jacks 772 and 773 mA source 0 to 24.00 mA 0.2 % + 2 counts Maximum mA drive: 24 mA into 1,000 ohms 772 and 773 mA simulate 0 to 24.00 mA 0.2 % + 2 counts Maximum voltage 50 V dc 773 Voltage source 0 to 10.00 V dc 0.2 % + 2 counts 2 mA maximum drive current 773 Voltage measure 0 to 30.00 V dc 0.2 % + 2 counts 771 772 773 mA measure w/jaw mA measure In circuit mA source mA sim Loop power 24 V DCV source 0-10 V DCV measure 0-30 V Scaled mA output to mA input mA in/out Fluke 772
- 113. 111 787/789 ProcessMeters Fluke 787 Included Accessories 787: Yellow Holster (H80M excl. TPAK), Hard Point Test Lead Set plus AC172 Alligator Clips, one 9V battery, user manual 789: Test Lead Set plus AC172 Alligator Clips, four 9V AA alkaline batteries, user manual and quick reference guide. Ordering Information Fluke 787 ProcessMeter Fluke 789 ProcessMeter FVF-SC2 FlukeView Forms Software including interface cable Features Maximum voltage: 1000 V Operating temperature: -20 to 55ºC 787 Size (HxWxD): 201 mm x 98 mm x 52 mm Weight: 0.642 kg Battery: One 9 V alkaline Battery life: 12 to 50 hours typical Three Year Warranty 789 Size (HxWxD): 203 mm x 100 mm x 50 mm Weight: 0.6 kg Battery: Four AA alkaline batteries Battery life: 14 to 140 hours typical Three Year Warranty The Fluke 787 and 789 ProcessMeters combine a Digital Multimeter and a Loop Calibrator in one rugged handheld tool, giving process technicians double the power. The Fluke 789 has a built-in 24 V loop supply which reduces the need for taking a separate power supply when doing offline transmitter testing. The IR communication port of the Fluke 789 allows data to be logged to optional FlukeView Software for graphical analysis and reporting. Double your power Recommended Accessories C125 See page 130 TL220-1 See page 122 80T-150U See page 128 i400 See page 126 i410 See page 127 Specifications Fluke 789 True RMS 787 789 DMM and Loop Calibrator in one tool Precision 1000 V, 440 mA True RMS Digital Multimeter DC current source and Loop Calibrator 24 V Loop power supply Min/Max / Average / Hold / Relative Modes Diode Test and Continuity Beeper Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp Simultaneous mA and % of scale read-out Externally accessible battery / fuses /- / HART mode setting with loop power and a built-in 250 Ω resistor 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check Infrared I/O serial port 787 789 Voltage measurements Range 0-1000 V AC or DC 0-1000 V AC or DC Resolution 0.1 mV to 1.0 V 0.1 mV to 1.0 V Accuracy 0.1% Rdg+1 LSD (V DC) 0.1% Rdg+1 LSD (V DC) Other specifications Max drive capability 500 Ω 1200 Ω Loop power N/A 24 V Resistance measurement To 40 MΩ, 0.2%+1 LSD To 40 MΩ, 0.2%+1 LSD Frequency To 19.999 kHz, 0.005%+1 LSD To 19.999 kHz, 0.005%+ LSD Continuity Beeps for resistance < 100 Ω Beeps for resistance < 100 Ω Span Check No Yes Current measurement Range 0-1 A 0-30 mA 0-1 A 0-30 mA Resolution 1 mA 0.001 mA 1 mA 0.001 mA Accuracy 0.2%+2 LSD 0.05%+2 LSD 0.2%+2 LSD 0.05%+2 LSD Current Sourcing Range 0-20 mA or 4-24 mA 0-20 mA or 4-24 mA Accuracy 0.05% of span 0.05% of span
- 114. 112 Field Calibrator Accessories Model Range (approx.) Resolution uncertainty (23 ± 3°C) (FS) Reference High side media Low side media Fitting material Max overpressure2) Differential 700P00 2.5 mbar 0.001 mbar 0.3 % Dry 1) Dry 1) 316 SS 30x 700P01/700P01Ex 25 mbar 0.01 mbar 0.2 % Dry Dry 316 SS 3x 700P02 70 mbar 0.007 mbar 0.15 % Dry Dry 316 SS 3x 700P22 70 mbar 0.007 mbar 0.1 % 316 SS Dry 316 SS 3x 700P03 340 mbar 0.01 mbar 0.05 % Dry Dry 316 SS 3x 700P23 340 mbar 0.01 mbar 0.025 % 316 SS Dry 316 SS 3x 700P04 1000 mbar 0.1 mbar 0.025 % Dry Dry 316 SS 3x 700P24/700P24Ex 1001 mbar 0.1 mbar 0.025 % 316 SS Dry 316 SS 3x Gage 700P05/700P05Ex 2 bar 0.1 mbar 0.025 % 316 SS N/A 316 SS 3x 700P06/700P06Ex 7 bar 0.7 mbar 0.025 % 316 SS N/A 316 SS 3x 700P27/700P27Ex 20 bar 1 mbar 0.025 % 316 SS N/A 316 SS 3x 700P07 34 bar 1 mbar 0.025 % 316 SS N/A 316 SS 3x 700P08 70 bar 7 mbar 0.025 % 316 SS N/A 316 SS 3x 700P09/700P09Ex 100 bar 10 mbar 0.025 % 316 SS N/A 316 SS 2x Absolute 700PA3 340 mbar 0.01 mbar 0.05 % 316 SS N/A 316 SS 3x 700PA4/700PA4Ex 1000 mbar 0.1 mbar 0.05 % 316 SS N/A 316 SS 3x 700PA5 2 bar 0.1 mbar 0.05 % 316 SS N/A 316 SS 3x 700PA6 7 bar 0.7 mbar 0.05 % 316 SS N/A 316 SS 3x Vacuum 700PV3 -340 mbar 0.01 mbar 0.04 % 316 SS Dry 316 SS 3x 700PV4 -1000 mbar 0.1 mbar 0.04 % 316 SS Dry 316 SS 3x Dual 700PD2 ± 70 mbar 0.007 mbar 0.15 % 316 SS Dry 316 SS 3x 700PD3 ± 340 mbar 0.01 mbar 0.04 % 316 SS Dry 316 SS 3x 700PD4 ±1000 mbar 0.1 mbar 0.025 % 316 SS Dry 316 SS 3x 700PD5 -1000/+2000 mbar 0.1 mbar 0.025 % 316 SS N/A 316 SS 3x 700PD6 -1000 mbar/+6.9 bar 1 mbar 0.025 % 316 SS N/A 316 SS 3x 700PD7 -1000 mbar/+13.8 bar 1 mbar 0.04 % 316 SS N/A 316 SS 3x High 700P29/700P29Ex 200 bar 0.01 bar 0.05 % C276 N/A C276 2x 700P30 340 bar 0.01 bar 0.05 % C276 N/A C276 2x 700P31 700 bar 0.07 bar 0.05 % C276 N/A C276 1.5x • Ranges from 2.5 mbar to 700 bar. • Gage, differential, dual (compound), absolute and vacuum modules • Very high accuracy: up to 0.025% FS • Features internal temperature compensation from 0°C to 50°C for full-accuracy performance • Pressure readings update twice per second, and may be displayed in any of 11 different units 700LTP-1 Low-pressure Test Pump • For low pressure applications • Vacuum to -13 psi / -.90 bar • Pressure to 100 psi / 6.9 bar • With fine-control, adjustable relief valve and slow bleed capability 700PTP-1 Pneumatic Test Pump-1 • Handheld pressure pump • Pressures up to 600 psi, 40 bar 700HTP-2 Hydraulic Test Pump • Pressures up to 10,000 psi/690 bar. • Compatible with Fluke 717, 718, 725 and 75x series. • Rugged cases protect the modules from harsh environments • All modules include NIST traceable certificate and test data • ATEX certified Ex versions available ( II 1 Eex ia IIB T4) 700PRV-1 Pressure Relief Valve • Pressure relief valve for 700HTP-1 • Adjustable from 725 to 5800 PSI (50 to 200 bar) 700HTH-1 Hydraulic Test Hose • Hydraulic test hose is a 10,000 psi, 690 bar 700ILF In-Line Filter for the Fluke 718 700PCK Pressure Module Calibration Kit BE9005 Battery Eliminator Fluke 700 Series Pressure Modules Other accessories 1)“Dry” indicates dry air or non-corrosive gas as compatible media. “316 S S” indicates media compatible with Type 316 Stainless Steel. “C276” indicates media compatible with Hastelloy C276. 2)Maximum overpressure specification includes common mode pressure. Fluke 700LTP-1Fluke 700HTP-2 Fluke 700PTP-1
- 115. 113 With the Fluke 810 Vibration Tester you will be able to control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing. In three quick, easy steps, the new Fluke 810 helps you locate and diagnose com- mon mechanical problems and prioritize their repair actions. The combi- nation of powerful algorithms and a database of real-world measurement experience make the Fluke 810 the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. Vibration Tester
- 116. 114 810 Vibration Tester Included Accessories Tri-axial TEDS accelerometer, accelerometer magnet mount, accelerometer mounting pad kit with adhesive, accelerometer quick disconnect cable, laser tachometer and storage pouch, smart battery pack with cable and adapters, shoulder strap, adjustable hand strap, Viewer PC application software, mini-USB to USB cable, getting started guide, illustrated quick reference guide, users manual CD-ROM, instructional training CD- ROM, hard carrying case. Ordering Information Fluke 810 Vibration Tester Diagnostic specifications Standard faults Unbalance, looseness, misalignment and bearing failures Analysis for Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/ lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles Machine rotational speed range 200 rpm to 12000 rpm Diagnosis details Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra Electrical specifications Ranging Automatic A/D converter 4 channel, 24 bit Usable bandwith 2 Hz to 20 kHz Sampling 51.2 kHz Digital signal processing functions Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging Sampling rate 2.5 kHz to 50 kHz Dynamic range 128 dB Amplitude accuracy ±0.1 dBV FFT resolution 800 lines Spectral windows Hanning Frequency units Hz, orders, cpm Amplitude units in/sec, mm/sec, VdB (US), VdB (Europe) Non-volatile nemory SD micro memory card, 2 GB internal + user accessible slot for additional storage Specifications (Check the Fluke web for detailed specifications) Battery type: Lithium-ion, 14.8 V 2.55 Ah Size (HxWxD): 186 x 267 x 70 Weight: 1.9 kg Fluke 810 Language support: eng, ger, fre, ita, spa, por Warranty: Three years on tester One year on sensor and tachometer The Fluke 810 Vibration Tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands. Use the vibration tester to: • Troubleshoot problem equipment and understand the root cause of failure • Survey equipment before and after planned maintenance and confirm the repair • Commission new equipment and ensure proper installation • Provide quantifiable proof of equipment condition and drive investment in repair or replacement • Prioritize and plan repair activities and operate more efficiently • Anticipate equipment failures before they happen and take control of spare parts inventories • Train new or less-experienced technicians and build confidence and skill across the team Features and benefits • On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime • Fault severity scale with four severity levels help you prioritize maintenance work • Repair recommendations advise technicians on corrective action • On-board context sensitive help provide real-time tips and guidance to new users • 2 GB expandable on-board memory provide enough space for your machinery’s data • Self-test functions ensure optimal performance and more time on the job • Laser tachometer for accurate machine running speed promotes confident diagnoses • Tri-axial accelerometer reduces measurement time by 2/3 over single axis accelerometers • Viewer PC Software expands data storage and tracking capacity • Color LCD display and intuitive multilingual, icon-based user interface promote use right out of the box Motor diagnosis and repair in three simple steps Set-up Measure Diagnose
- 117. 115 Radiation safety quality assurance is top of mind for hospitals, nuclear power facilities, nuclear medicine laboratories, x-ray manufacturers, government agencies, state inspectors, emergency response and HAZMAT (hazardous materials) teams, and police and fire departments around the world. With the 481 Fluke offers these professionals the versatility they need to get the job done and the quality they trust in a radiation-safety device. 481 Radiation Detection Meter
- 118. 116 481 Radiation Detection Meter Fluke 481 Ordering Information Fluke 481 Ion Chamber Survey Meter Fluke 481-DESI DESI Ion Chamber Survey Meter, dose equivalent SI 190HPS Single Unit Carrying Case The Fluke 481 Radiation Detection Meter is a portable and practical means for discovering irradiated goods, and for helping remediate contaminant and safety issues while minimally affecting performances. Ideal for detecting irradiated goods, equipment, surfaces or environments in industrial settings, the 481 Radiation Meter helps ascertain worker safety and compliance to national regulations. Use of the Fluke 481 assures employees that radiation dangers are known, monitored and calculated for their security. Whenever radiation is found, a clear and quantifiable result provides handlers to comply with national guidelines while avoiding unnecessary steps that could stop procedures, impact productivity or lead to missed revenue. • Detects skin-dose (beta particle) and deep-dose (gamma) and X-ray radioactivity • Requires no adjustments; simple two button process • Provides promptly read, correct value through autoranging capability • Easily visible inside truck trailers and other low-light situations with automated backlight • Works dependably inside or outside thanks to sealed case • 30 % more precise than other available meters • Delivers more than one week of uninterrupted functioning with two 9-volt alkaline batteries • Proven in use by state and local governmental emergency response professionals, state inspectors, HAZMAT teams and nuclear power workers • Measures both dose and dose-rate • Valuable for contamination-detection, general radiation area metering, radiation-level monitoring, and hazardous materials assessment • Rugged Fluke design Fluke 481 Radiation Detection Meter General specifications Fluke 481 Fluke 481-DESI Radiation detected Beta > 100 keV Gamma > 7 keV Operating ranges 0 mR/h to 5 mR/h (8 sec) 0 mR/h to 50 mR/h (2.5 sec) 0 mR/h to 500 mR/h (2 sec) 0 R/h to 5 R/h (2 sec) 0 R/h to 50 R/h (2 sec) 0 μSv/h to 50 μSv/h (8 sec) 0 μSv/h to 500 μSv/h (2,5 sec) 0 mSv/h to 5 mSv/h (2 sec) 0 mSv/h to 50 mSv/h (2 sec) 0 mSv/h to 500 mSv/h (2 sec) Accuracy Within 10 % of readings between 10 % and 100 % of full scale indication on any range, exclusive of energy response Detector Chamber (cc volume air ionization) 349 cc Chamber wall (phenolic) 246 mg/cm2 Chamber window (mylar) 6.6 mg/cm2 Beta slide 440 mg/cm2 Automatic features Auto-zeroing, auto-ranging, and auto-backlight Power requirements Two 9 V alkaline, 200 hours operation Warm-up time One minute Battery life Four+ hours continuous use per battery pack (assumes 50 % brightness of LCD) Dimensions (W x D x H) 10 cm x 20 cm x 15 cm Weight 1.11 kg Display LCD analog/digital with backlight Analog 100 element bar graph 6.4 cm long. Bar graph is divided into 5 major segments, each labeled with the appropriate value for the range of the instrument Digital 2.5 digit display is followed by a significant zero digit depending on the operating range of the instrument. The units of measurement are indicated on the display at all times. Digits are 6.4 mm high. Low battery and freeze indicators are also provided on the display Modes Integrate mode Operates continuously 30 seconds after the instrument has been turned on. Integration is performed even if the instrument is displaying in mR/h or R/h Freeze mode Will place a tick mark on the bar graph display to hold on the peak displayed value. The unit will continue to read and display current radiation values Environmental Temperature range -20 °C to 50 °C Relative humidity 0 % to 100 % (at 50 °C) Geotropism < 1 % Specifications
- 119. 117 The Fluke line of intrinsically safe tools is designed to meet the needs of technicians working in and around hazardous areas. The tools are ideal for environments in chemical plants, petro-chemical plants, oil plat- forms, refineries and other locations where risk of explosion exists. The products are easily recognizable from standard Fluke products by their lighter grey colour and red holster. ATEX Certified Test Tools
- 120. 118 What is “Intrinsically Safe”? Intrinsically safe standards apply to all equipment that can create one or more of a range of defined potential explosion sources: • Electrical sparks • Electrical arcs • Flames • Hot surfaces • Static electricity • Electromagnetic radiation • Chemical reactions • Mechanical impact • Mechanical friction • Compression ignition • Acoustic energy • Ionizing radiation What industries are intrinsically safe products designed for? • Petro-chemical • Oil platforms and refineries • Pharmaceutical • Bulk materials (e.g. grain) • Mining • Pipelines • Any environment where explosive gases are present What is ATEX? The primary intrinsically safe standard has been set in the European Union with the 9/94/EC Directive, commonly called ATEX (“Atmosphères Explosibles,” French for explosive atmospheres). The stated goal of the guidelines is to “help ensure the free movement of products in the European Union” by “minimizing the number of safeguard clause applications, at least those originating from divergent interpretations The ATEX rules have been in place as a voluntary standard since 1 March 1996. The rules are mandatory on electrical and electronic equipment for use in environments subject to explosion hazard sold in the EU starting 1 July 2003. From this date onwards, all products sold for use in explosive atmospheres must have ATEX certification and carry the distinctive symbol: The Fluke Ex (IS) product line Fluke is among the first manufacturers to produce handheld test tools according to the latest ATEX standards. The Fluke line of intrinsically safe tools is designed to meet the needs of technicians working in and around hazardous areas: • Install, maintain and troubleshoot equipment by using the new Fluke 87V Ex Digital Multimeter • Maintain and calibrate sensors, transmitters and control loops with the line of Ex field calibrators The tools are ideal for environments in petro-chemical plants, oil platforms, refineries and other locations subject to risk of explosion. Apart from having the ATEX markings, the visual difference between a standard Fluke tool and the corresponding Ex version is the different grey body colour and a red, conductive holster designed specifically to eliminate the potential for electrical discharge. Inside, the Fluke Ex tools have been reengineered to reduce energy avoiding generation of heat and electrical sparks. They are premium products designed for ultimate safety. Making sense of ATEX certification Fluke 707Ex is ATEX-compliant and is certified II 2 G EEx ia IIC T4— but what exactly does that mean? Intrinsic safety is a protection standard employed in potentially explosive atmospheres. Devices that are certified as “intrinsically safe” are designed to be unable to release sufficient energy, by either thermal or electrical means, to cause ignition of flammable material (gas, dust/ particulates). Here a brief explanation of the ATEX certification designations. A brief look at ATEX The ATEX examination mark. This sign is required on all devices used in European hazardous areas. II 2 G The classification of zones. “II” designates the tool is approved for all non-mining areas. “2” represents the category of the device, in this case the device is rated for the second most hazardous areas. “G” designates atmosphere, in this case gas, vapors and mist. EEx Explosion protection based on European Ex-regulations. ia The type of protection from explosion, in this case the energy in a device or connector has been reduced to a safe value. IIC Gas Group. “IIC” indicates compatibility with the most dangerous gas group. T4 Temperature class gives the user the maximum temperature of a surface that may be in contact to the Ex atmosphere under fault conditions. T4 is rated at 135°C. ATEX certification 707Ex A brief look at ATEX
- 121. 119 Fluke 87V Ex Intrinsically safe version of the world’s most popular multimeter With its high performance, accuracy and motor drive compatibility, the Fluke 87V is the most popular industrial multimeter around. Now Fluke has introduced a new intrinsically safe version – the 87V Ex – for measurements in and around hazardous areas. The Fluke 87V Ex has all the measurement and troubleshooting functions of the proven Fluke 87V. Unlike other ATEX-certified tools, it can be used both inside and outside the hazardous zone (ATEX Zones 1 & 2) without compromising performance or compliance. So there’s no need to carry different tools for use in specific zones. It also has a built- in thermometer with TC probe, further reducing technicians’ tool counts. • ATEX safety rating II 2G EEx ia IIC T4 • EN61010-1 CAT III 1000V/CAT IV 600V electrical safety rating See also page 15 ATEX-certified Test Tools Fluke 725Ex Intrinsically safe Multifunction Process Calibrator The Fluke 725Ex intrinsically safe Multifunction Process Calibrator is powerful yet easy-to-use. Combined with the Fluke 700PEx Pressure Modules, the 725Ex is able to calibrate almost any process instrument likely to need service in any area where explosive gases may be present. • ATEX safety rating II IG EEx ia IIB 171°C See also page 104 1551A Ex and 1552A Ex “Stik” Thermometer Finally, a digital substitute for your mercury-in-glass thermometers! Accurate and repeatable to ± 0.05 °C over its full range, the 1551A/1552A “Stik Thermometer is the new “gold standard” of industrial temperature calibration. Whether working outdoors in environments where potentially explosive gases may be present or on the floor of a processing plant, the intrinsically-safe, battery operated, portable reference thermometer is designed to go where you work. • ATEX and IECEx compliant See also page 57 Fluke 707Ex Fast, one-handed tool for loop checks The Fluke 707Ex is the ideal, stand alone tool for calibration and maintenance of 4 to 20 mA control loops. It provides 24V loop power while measuring mA, and lets you measure and source/simulate mA with 1 μA resolution. • ATEX safety rating II 2G EEx ia IIC T4 See also page 109 Fluke 718Ex Self-contained Pressure Calibrator The Fluke 718Ex offers a convenient, self contained solution for pressure measurements and calibration. With its internal pressure sensor and pump, it’s ready for immediate, stand alone use. The pressure range can easily be extended to up to 200 bar with any of the 8 Fluke 700PEx Pressure Modules. • ATEX safety rating II IG EEx ia IIC T4 See also page 108 Fluke 700Ex Pressure Modules These intrinsically safe pressure modules for use with the Fluke 725Ex Multifunctional Process Calibrator and Fluke 718Ex Pressure Calibrator cover the most commonly used pressure calibration ranges from 0-25 mbar and 0-200 bar. There’s a choice of 8 gage, differential and absolute modules. • ATEX safety rating II 1G EEx ia IIC T4 See also page 112 Fluke intrinsically safe tools for tough measurement and calibration tasks Fluke 87V Ex Fluke 707Ex Fluke 718Ex Fluke 700Ex Fluke 725Ex 1551A Ex/1552 Ex
- 122. 120120 The best test tools deserve accessories designed and manufactured to the same high quality and safety standards. So we also provide a comprehensive range of test leads, probes and clips, current clamps, temperature accessories and dedicated electronic and automotive accessories. And to protect your valuable instrument, choose a rugged Fluke tailor-made holster or case. General Accessories
- 123. 121 TL910 Electronic Test Lead Set • Very small 1 mm tips to access hard to reach test points • Probe tip length up to 100 mm, test lead length: 1 m • Included: 3 sets of spring loaded gold tips and 2 sets of stainless steel tips • CAT II 1000 V, 3 A rating Electronic Test Leads, Probes & Clips TP912 Replacement Tips for TL910 • Replacement tips for TL910 • Five sets of gold plated and stainless steel tips TL40 Retractable Tip Test Lead Set • One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm • Extra hard probe tips to provide long service life • Flexible silicone insulated test leads • CAT II 150 V, 3 A rating, UL listed TL940 Mini-Hook Test Lead Set • 1 pair (red, black) of test leads with multi- stacking 4 mm banana plugs and mini-hooks • Mini-hooks attach to component leads up to 1.5 mm diameter • 90 cm long PVC insulated leads • 30 V rms or 60 V DC, 15 A TL950 Mini-Pincer Test Lead Set • 1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers • Mini-pincers open to 2.3 mm • 90 cm long PVC insulated leads • 30 V rms or 60 V DC, 15 A TL960 Micro-Hook Test Lead Set • 1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks • Micro-hooks attach to component leads up to 1 mm diameter • 90 cm long PVC insulated leads • 30 V rms or 60 V DC, 15 A TL930 Patch Cord Set (60 cm) • 1 pair (red, black) multi-stacking 4 mm banana plug patch cords • Nickel-plated banana plugs • 61 cm long PVC insulated leads • 30 V rms or 60 V DC, 15 A TL932 Patch Cord Set (90 cm) • 1 pair (red, black) multi-stacking 4 mm banana plug patch cords • Nickel-plated banana plugs • 90 cm long PVC insulated leads • 30 V rms or 60 V DC, 15 A TL935 Patch Cord Kit (60, 90, 120 cm) • 3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords • Nickel-plated banana plugs • 60 cm, 90 cm, 120 cm long PVC insulated leads • 30 V rms or 60 V DC, 15 A TL80A-1 Basic Electronic Test Lead Kit • One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender. • C75 soft carrying case • CAT II 300 V. UL listed TP920 Test Probe Adapter Kit • Set of push-on adapters for TL71 and TL75 test probes • IC test adapters, extended probe tips, medium alligator clips (max.opening 7.6 mm) • CAT I 300 V, 5 A rating TL970 Hook and Pincer Kit • TL940 Mini-Hook Test Lead Set • TL950 Mini-Pincer Test Lead Set • TL960 Micro-Hook Test Lead Set TL81A Deluxe Electronic Test Lead Kit • Includes components of TL80, plus one pair (red, black) each modular 1 meter long silicone test lead, test probe, hook-style and pinch style clip, alligator clip, IC probe tip adapter and spade lugs • Quadfold soft carrying case • CAT II 300 V. UL listed TLK287 Electronic Master Test Lead Kit • Includes modular leads, probes (black and red), minigrabber/jack set, medium alligator clips (black and red), spade lug/banana jack plated (set), couplers IEC1010 (black and red), micrograbbers and -leads (black and red) • TL910 Electronic Test Lead Set • Quadfold Pouch • CAT III 1000 V (probes only) BP980 Double Banana Plug Kit • 5 pair (red, black) of double 4 mm banana plugs • Each plug has 3.1 mm holes for mounting wires and components • Brass plugs/jack, beryllium copper springs • 30 V rms or 60 V DC, 15 A Kits Test Leads Test Leads / Patch Cords
- 124. 122 TL71-1 Premium Test Lead Set • One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads • Recommended for μV measurements • CAT II 1000 V, 10 A rating. UL listed Industrial Test Leads, Probes & Clips TL75-1 Hard Point™ Test Lead Set • One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs • Recommended for general purpose measurements • CAT II 1000 V, 10 A rating. UL listed TL76 All-in-one Test Lead Set • One pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plug • Lantern tip (removable) for use with European wall sockets (4 mm Ø ) • Lantern tip can be removed for easy access to terminal blocks (2 mm Ø) • Removable, insulated IC caps allow probing on closely spaced leads and compliance with GS38. • Cat IV 600 V, CAT III 1000 V, 10 A rating, UL listed SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger- hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. TL221 SureGrip™ Extension Lead Set • One pair (red, black) of silicone insulated leads with straight connectors on both ends • Reinforced strain relief • Includes one pair (red, black) of female couplers • Extends test leads by 1.5 m • 600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed TL222 SureGrip™ Silicone Test Lead Set • DMM test leads (red, black) with safety shrouded, standard diameter banana plugs • Right angle connector on both ends • Reinforced strain relief • 1.5 meter silicone-insulated wire resists heat & cold • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed TL224 SureGrip™ Silicone Test Lead Set • DMM test leads (red, black) with safety shrouded, standard diameter banana plugs • Right angle connector on one end and straight connector on the other • Reinforced strain relief • 1.5 meter silicone-insulated wire resists heat & cold • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed TL27 Heavy Duty Test Lead Set • DMM test leads (red, black) with safety shrouded, standard diameter banana plugs • Heavy duty EPDM insulation • Length 1.5 m • CAT III 1000V, 10A rating. UL listed TL220-1 SureGrip™ Industrial Test Lead Kit • AC220 SureGrip™ Alligator Clip Set • TP238 SureGrip™ Insulated Test Probe Set • TL222 SureGrip™ Silicone Test Lead Set (right to right) TL223-1 SureGrip™ Electrical Test Lead Kit • AC220 SureGrip™ Alligator Clip Set • TP238 SureGrip™ Insulated Test Probe Set • TL224 SureGrip™ Silicone Test Lead Set (straight to right) TL238 SureGrip™ High Energy Test Lead Kit • TP238 SureGrip™ Insulated Tip Test Probes with less than 4 mm of exposed metal (GS38) with flexible removable finger banner • TP280 20 cm Test Probe Extenders • TL224 SureGrip™ Silicone Test Lead Set TLK-220 EUR SureGrip™ Accessory Kit • AC220 SureGrip™ Alligator Clip Set • AC285 SureGrip™ Large Jaw Alligator Clip Set • TP74 Test Probe Set (4 mm) • TL224 SureGrip™ Silicone Test Lead Set • Large zippered soft case with moveable divider KitsModular Test LeadsTest Leads H900 Test Lead Holder • Heavy duty construction with mounting holes • Holder has 10 slots for wires up to 8 mm in diameter • Over-all dimensions: 27.9 cm L x 8.9 cm W x 3.2 cm H
- 125. 123 T5-KIT-1 Accessory Kit for use with T5 This kit completes the offering of a T5 with add- on probes and carrying case. • TP238 SureGrip™ Insulated Test Probe Set • AC285 SureGrip™ Large Jaw Alligator Clip Set • C33 Soft Meter Case Industrial Test Leads, Probes & Clips L215 SureGrip™ Kit with Probe Light and Extender • L200 Probe Light • TP280 20 cm Test Probe Extenders • TP220 SureGrip Test Probes • TL224 SureGrip Silicon Test Lead Set • Foldable soft pouch with six pockets and hook-and-loop TP74 Lantern Tip Test Probe Set • One pair (red, black) • Tips include banana-style spring contacts with nickel-plated brass ends • CAT III 1000 V, 10 A rating. UL listed TP1-1, TP2-1, TP38 SlimReach Test Probe Sets • One pair (red, black) of slender probes for closely spaced or recessed terminals • TP1-1: Flat blade design to hold securely in blade type wall sockets • TP2-1: 2 mm diameter tip for electronics work. Also compatible with AC72. • TP38: Insulated probe tip (designed to meet GS38 specs for United Kingdom). • TP1-1/TP2-1: CAT II 1000 V TP38: CAT IV 600 V / CAT III 1000 V 10A rating, UL listed TP80 Electronic Test Probe Set Recommended for use with TL222 and TL224 • One pair (red, black) • IC insulated cap prevents shortening of IC legs for probing high density components or boards • CAT III 1000 V, 10 A rating. UL listed TLK291 Fused Test Probe Set • One pair (red, black) fused test probes • Designed to meet GS38 specs for United Kingdom • CAT III 1000V, 0.5A • Fuse rating: 500 mA/1000 V/FF/50 kA FTP-1 SureGrip™ Fused Test Probes • Built-in fuses for added protection • 2 mm threaded probe tips include removable 4 mm lantern-style spring contacts • Removable GS38 insulted IC caps for probing closely spaced leads • CAT III 1000 V, CAT IV 600 V, 10A FTPL-1 SureGrip™ Fused Test Probes with Leads • FTP Fused Test Probes with built-in fuses for added protection • Includes TL224 Silicone Insulated Test Leads • CAT III 600 V, CAT IV 600 V, 10 A AC285-FTP Alligator Clips and Adapters for FTP-1 or FTPL-1 Enhance the usage of your Fluke fused test leads with this large alligator clip set. This accessory enables the use of AC285 alligator clips with FTP-1 fused probes. • CAT III 600 V, CAT IV 600 V, 10 A TP220-1 SureGrip™ Test Probe Set • One pair (red, black) of Industrial test probes • Sharp, 12 mm stainless steel tip provides reliable contact • Flexible finger barrier improves grip • Recommended for use with TL222 and TL224 test leads • CAT II 1000 V, 10 A rating. UL listed TLK290 Test Probe Kit • Kit includes three flexible socket probes and a large alligator clip • To be used on three phase sockets. • Probes have flexible width test points that fit securely in 4 to 8 mm sockets. • Test probe set to be used on motor and three phase sockets • Safe contact e.g. in CEE 16 A and CEE 32 A plugs • CAT II 1000 V, 8 A Kits Modular Test Probes (for use with Modular Test Leads) Modular Test Probes (for use with Modular Test Leads) All accessories have a one year warranty TLK-225-1 SureGrip™ Master Accessory Kit • AC220 SureGrip™ Alligator Clip Set • AC280 SureGrip™ Hook Clip Set • AC283 SureGrip™ Pincer Clip Set • AC285 SureGrip™ Large Jaw Alligator Clip Set • TP238 SureGrip™ Insulated Test Probe Set • TL224 SureGrip™ Silicone Test Lead Set • 6-Pocket Storage Pouch New TLK289 EUR Industrial Master Test Lead Kit • C116, Soft Case • AC220 Alligator Clip Set • AC280 Hook Clip Set • AC285 Large Jaw Alligator Clip Set • TP74 Lantern Tip Test Probe Set • TL224 Test Lead Set • TPAK Hanging Kit • 80BK-A Temperature Thermocouple
- 126. 124 Industrial Test Leads, Probes & Clips AC220 SureGrip™ Alligator Clip Set • One pair (red, black) of small, insulated, nickel plated jaws • Blunt tip grabs round screw heads up to 9.5 mm • Recommended for use with TL222 and TL224 test leads • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed AC280 SureGrip™ Hook Clip Set • One pair (red, black) of nickel plated clips • Profile narrows to 5.6 mm at tip, hook opening 6.4 mm at front, 2 mm at base • Recommended for use with TL222 and TL224 test leads • CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed AC283 SureGrip™ Pincer Clip Set • One pair (red, black) of nickel plated pincers open to 5 mm • 11.4 cm flexible insulated shaft • Recommended for use with TL222 and TL224 test leads • CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed AC285 SureGrip™ Large Jaw Alligator Clip Set • One pair (red, black) of large alligator clips with nickel-plated steel jaws • Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt • Recommended for use with TL222 and TL224 test leads • CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed AC87 Heavy Duty Bus Bar Clip Set • One pair (red, black) of flat, right angle design for connecting to bus bars • Adjustable collar provides 2 ranges of jaw openings up to 30 mm • CAT III 600 V, 5 A rating. UL listed AC89 Heavy Duty Insulation Piercing Test Clip • Single probe pierces 0.25 to 1.5 mm insulated wire • Small pin allows self-healing of the insulation • CAT IV 600V, CAT III 1000 V, 5 A rating. UL listed AC172 Alligator Clip Set • Slide-on alligator clips (red, black) for TL175/TL71/TL75 • Jaws provide 8 mm opening • CAT IV 600 V, CAT III 1000 V, • 10 A rating. UL listed Modular Clips (for use with Modular Test Leads) Push-on Clip (for use with TL71 and TL75 Test Lead Sets) Modular Clips (for use with Modular Test Leads) TL175 TL175E TP175 • Patented extendable tip sheath that meet new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements • New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement • Double insulated silicone leads. TL175 withstands high temperatures and remain flexible in cold temperatures. • Extra-heavy strain relief on both probe-end and plug-end, testing beyond 30,000 bends without failure. • Universal input plugs compatible with all instruments that accept standard 4 mm shrouded banana plugs • Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 • TL175E includes removable 4 mm lantern tips for versatility • Probes always show correct category rating for tip being used • Environmental ratings: -20 °C to 55 °C, altitude: 2000 m • Conforms to latest safety standard EN61010-031: 2008 • One-year warranty • Also available as Test Probe Set, TP175 and TP175E Fluke TL175 TwistGuard™ Test Leads TL175 TwistGuard™ Test Leads offer: The new Fluke Tl175 TwistGuard™ Test Leads are innovative test leads with adjustable length test tips for use in changing measurement situations. By simply twisting the test lead the user can change the exposed probe tip length from 19 mm to 4 mm. All accessories have a one year warranty Fluke TL175 TwistGuard™ Test Leads New
- 127. 125 TP81 and TP82 Insulation Piercing Clip Set • Banana jack accepts all DMM and banana jack leads • Available for 4 mm input, modular connection with TP81 or available as a 2 mm input to slip onto probe tips with the TP82 • Tested to 60 V DC Automotive Accessories TP84 Oxygen Sensor Insulation Piercing Clip • Banana jack accepts all DMM and banana jack leads (4 mm) • Tested to 60 V DC TP88 Rigid Back Probe Pin Set • Slides onto test probes measuring 2 mm • Tested to 60 V DC TP40 Automotive Back Probe Pins (five) • Banana jack accepts all DMM and banana jack leads (4 mm) • Tested to 60 V DC BP880 BNC to Female Double Stacking Banana Plug BP881 BNC to Male Double Stacking Banana Plug • Allows for hands-free testing in controlled voltage environments 500 VRMS maximum • Banana plug is nickel- plated, beryllium copper for low contact resistance • The BNC shell is plated for tarnish resistance • Operating temperature +50°C maximum TLK282-1 SureGrip™ Deluxe Automotive Test Lead Kit Kit contains: • TP81 Insulation Piercing Clip Set • TP40 Automotive Back Probe Pins (five) • TL224 SuregripTM Silicone Test Lead Set • TP238 SuregripTM Insulated Test Probe Set • AC220 SuregripTM Alligator Clip Set • AC285 SuregripTM Large Jaw Alligator Clip Set • AC280 SuregripTM Hook Clip Set • Soft Case PV350 Pressure Vacuum Module • Compatible with all Fluke and most popular DMMs • Digital pressure and vacuum measurements in a single module • Transducer sealed in 316 stainless steel compatible with variety of liquids and gases • Measures vacuum to 76 cm Hg • Display results in English (psig or Hg) or metric (kPa or cm Hg) units • Measures pressure to 500 psig (3447 kPa) TL28A Automotive Test Lead Set • Flexible silicone insulated leads are heat and cold resistant • CAT I 30 V, 10 A TLK281-1 SureGrip™ Automotive Test Lead Kit Kit contains: • TP81 Insulation Piercing Clip Set • TL224 SuregripTM Silicone Test Lead Set • TP220 SuregripTM Test Probe Set • AC220 SuregripTM Alligator Clip Set • AC285 SuregripTM Large Jaw Alligator Clip Set • Soft Case TL 82 Automotive Pin & Socket Adapter Kit This set of male and female adapters allows you to make firm connection to pin and socket connectors. Kit contains: • Retractable shrouded test lead set • Complete set of 8 pin-and-socket adapters with flexible tips • One red and black in different sizes • Rated to 60 V DC 90i-610s AC/DC Current Probe (600 A) • Current Range: 2 to 600A DC or AC Peak • Basic Accuracy (DC to 400Hz): ± (2% of reading + 1A) • Output Signal: 100A range: 10mV/A 600A range: 1mV/A • Frequency Range: 40Hz to 400Hz • Working Voltage: 600V AC rms • Maximum Conductor Diameter: 34 mm Piercing Clips RPM80 Inductive Pick-up • Provides RPM readings SCC128 Automotive Accessory Kit (120 Series) Pressure Module Probe Pins Banana Plugs Test Leads Current Probe Inductive Pick-up ScopeMeter Accessory Kits SCC198 Automotive Accessory Kit (190 Series) These kits provide a host of accessories that allow you to easily and quickly make measurements on automotive electronic systems using a 120 or 190 Series ScopeMeter. BP880 BP881
- 128. 126 Current Clamps i5s i50s i200 i200s i400 i400s Nominal current range(s 5 A 3/30 AC RMS or DC 200 A 20 A 200 A 400 A 40 A 400 A Continuous AC current range 0.01 A - 6 A 30 A cont. 50 A<10 sec 0.5 A - 200 A 0.1 - 24 A 0.5 A - 200 A 5 A - 400 A 0.5 - 40 A 5 A - 400 A Highest current 70 A 30 A cont. 50 A<10 sec 240 A 240 A 1000 A 1000 A Lowest measurable current 10 mA 10 mA 0.5 A 0.5 A 1 A 0.5 A Basic accuracy (48-65 Hz) 1) 1% ± 5% typical DC to 100 kHz 1% + 0.5 A 1.5% + 0.5 A 2% + 0.15 2% + 0.15 Useable frequency 40 Hz - 5kHz DC to 50 MHz 40 Hz - 10 kHz 40 Hz - 10 kHz 45 Hz - 3 kHz 45 Hz - 3 kHz Max. working voltage 600 V AC 300 V AC RMS or DC 600 V AC 600 V AC 1000 V 1000 V Maximum conductor diameter 15 mm 5 mm 20 mm 20 mm 32 mm 32 mm Output level(s) 400 mV/A 1/100 mV/A 1 mA/A 100 mV/A 10 mV/A 1 mA /A 10 mV/A 1 mV/A Batttery, battery life External Power Output cable (m) 2.5 2 1.5 2.0 1.5 2.5 Shrouded banana plugs BNC connector • BNC to banana adapter included Safety CAT III, 600 V CAT I 300 V CAT III. 600 V CAT III, 600 V CAT III 1000 V / CAT IV 600 V CAT III 1000 V / CAT IV 600 V i800 i10000s i2000 flex i3000s flex-24 i3000s flex-36 i3000s i60000 flex-24 i6000s flex-36 Nominal current range(s) 800 A RMS 10 A 100 A 1000 A 20 A 200 A 2000 A 30 A 300 A 3000 A 30 A 300 A 3000 A 60 A 600 A 6000 A AC Continuous AC current range 0.1 A - 800 A RMS 0.1 A - 10 A 0.1 A - 100 A 1 A - 1000 A 1 A - 20 A 2 A - 200 A AC RMS 30 A - 2000 A 1 A - 30 A 2 A - 300 A AC RMS 30 A - 3000 A 1 A - 30 A 1 A - 300 A 1 A - 2400 A 1 A - 6000 A AC RMS Highest current 1500 A 2000 A 2500 A AC RMS 3500 A AC RMS 4000 A 6000 A Lowest measurable current 0.1 A 0.1 A 1 A 1 A 1 A 1 A Basic accuracy (48-65 Hz) 1) 0.10% 1% + 1 A 1% 1% 2% + 2 A ± 1% of range Useable frequency 30 Hz - 10 kHz 5 Hz - 100 kHz 10 Hz - 20 kHz (-3dB) 10 Hz - 50 kHz (-3dB) 10 Hz - 100 kHz 10 Hz to 50 kHz Max. working voltage 600 V AC RMS or DC 600 V AC 600 V AC RMS 600 V AC RMS 600 V AC 600 V AC RMS or DC Maximum conductor diameter 54 mm 54 mm 178 mm Flex-24 178 mm Flex-36 275 mm 64 mm Flex-24 170 mm Flex-36 275 mm Output level(s) 1 mA/A 100 mV/A 10 mV/A 1 mV/A 100 mV/A 10 mV/A 1 mV/A 100 mV/A 10 mV/A 1 mV/A 10 mV/A 1 mV/A 0.1 mV/A 50 mV/A 5 mV/A 0.5 mV/A Batttery, battery life 200 hours 400 hours 400 hours Output cable (m) 1.6 1.6 0.5 0.5 2.1 0.5 Shrouded banana plugs n/a BNC connector n/a BNC to banana adapter included n/a Safety CAT III, 600 V CAT III, 600 V CAT III, 600 V CAT III, 600 V CAT III, 600 V CAT III, 600 V i5s i50s i200 i200s i400 i400s i800 i1000s i2000 flex i3000s flex i3000s i6000s flex Specifications AC models 1) Basic Accuracy: % reading + floorspec 1) Basic Accuracy: % reading + floorspec
- 129. 127 Current Clamps 80i-110s i30 i30s i310s i410 i1010 Specifications AC/DC Models * For specifications of 90i-610s see page 125 1 For DC only 2 Requires PM 9081 (see page 86) 3 Requires PM 9082 (see page 86) 4 115, 117 only 1) Basic Accuracy: % reading + floorspec 80i-110s i30 i30s i310s i410 i1010 Measurement type Hall sensor Hall sensor Hall sensor AC/DC Hall sensor Hall sensor Nominal current range(s), 10 A, AC/DC 100 A, AC/DC 20 A AC RMS or DC 20 A AC RMS or DC 30/300 A AC RMS or 45/450 A DC 400 A, AC/DC 600 A, AC 1000 A, DC Continuous current range 0.1 A - 10 A AC/DC 1 A - 100 A AC/DC 30 A AC Peak 30 A AC Peak 100 mA - 300 A AC RMS or 450 A DC 1 A - 400 A AC/DC 1 A - 600 A, AC 1 A - 1000 A, DC Highest current 140 A - 2 kHz 30 A AC Peak 30 A AC Peak 300 A AC RMS or 450 A DC 400 A 1000 A Lowest measurable current 0.1 A 50 mA 50 mA 100 mA 0.5 A 0.5 A Basic accuracy 1) 3% + 50 mA (@ 10 A) ± 1% of reading ±2 mA ± 1% of reading ±2 mA ±1% of reading 3.5% + 0.5 A 2% +0.5 A Useable frequency DC - 100 kHz DC to 20 kHz (-0.5dB) DC to 100 kHz (-0.5dB) DC to 20 kHz DC - 3 kHz DC - 10 kHz Zero error adjustment manual adjust via thumbwheel manual adjust via thumbwheel Manual Max. working voltage 600 V 300 V AC RMS 300 V AC RMS 300 V AC RMS or DC 600 V 600 V Maximum conductor diameter 11.8 mm 19 mm 19 mm 19 mm 30 mm 2 x 25 mm 30 mm 2 x 25 mm Output level(s) 100 mV/A 10 mV/A 100 mV/A 100 mV/A 10/1 mV/A 1 mV/A 1 mV/A Battery, battery life 9 V, 55 h 30 hours typical 30 hours typical 30 hours 9 V, 60 h 9 V, 60 h Output cable length (m) 1.6 1.5 2 2 1.6 1.6 Shrouded banana Plugs n/a BNC connector n/a BNC to banana adapter included n/a Safety CAT II, 600 V CAT III, 300 V CAT III, 300 V CAT III, 300 V CAT III 300 V CAT III, 600 V CAT III, 600 V Current Clamp Compatibility Chart AC Models i5s i200 4 i200s i400 i400s 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 i430 flexi-TF i800 4 i1000s 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 i2000 flex (new version) 3 3 3 3 3 i3000s i3000s flex i6000s flex 113/114/115/116/117 175/177/179 187/189 233 287/289 27II/28II 8845A/8846 8808A 77IV 83V/87V 88V 43B 430SeriesII 123/124 125 190SeriesII/225C/S 1577/1587 715 724 725 753/754 787 789 AC/DC Models i30 i30s 80i-110s 2 2 2 2 2 2 2 2 2 2 2 2 2 2 i310s i410 / i410 kit 3 3 3 1 1 1 i1010 / i1010 kit 3 3 3 1 1 1 Other 90i-610s* 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 All accessories have a one year warranty i410 Kit AC/DC Current Clamp (400A) with soft case i1010 Kit AC/DC Current Clamp (1000A) with soft case • Combination of current clamp with carrying case • Zipped soft case with moveable divider • Soft case is large enough to hold a meter
- 130. 128 80PK-22 SureGrip™ Immersion Probe • Type-K thermocouple for use in liquids and gels • Measurement range: -40 to 1090°C • Probe length: 21.3 cm Temperature Accessories 80PK-24 SureGrip™ Air Probe • Type-K thermocouple for use in air and non-caustic gas measurements • Bead protected by perforated baffle • Measurement range: -40 to 816ºC • Probe length: 21.6 cm 80PK-25 and 80PT-25 SureGrip™ Piercing Probe • 80PK-25: Type-K thermocouple suitable for food industry, liquids and gels • 80PT-25 operates with T-type thermometers • Measurement range: 80PK-25: -40 to 350°C 80PT-25: -196 to 350°C • Probe length: 10.2 cm SureGrip™ accessories are designed to improve steadiness in s lippery hands. Rubber overmolded surfaces and finger- hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. 80PK-26 SureGrip™ General Purpose Probe • Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications • Measurement range: -40 to 816ºC • Probe length: 21.2 cm 80PK-27 SureGrip™ Industrial Surface Probe • Type-K thermocouple for surfaces in rugged environment • Durable ribbon sensor • Measurement range: -127 to 600°C • Probe length: 20.3 cm 80PK-1 and 80PJ-1 Bead Probe • 80PK-1: Type-K thermocouple for general purpose applications • 80PJ-1 operates with J-type thermometers • Measurement range: -40 to 260°C • Probe length: 1 m lead wire 80PK-3A Surface Probe • Type-K thermocouple for flat or curved surfaces such as plates and rollers • Measurement range: 0 to 260°C • Probe length: 9.5 cm 80PK-8 / 80PK-10 Pipe Clamp Temperature Probe • Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces • Durable ribbon sensor • Measurement range: -29 to 149°C for pipe diameters from 6.4 to 34.9mm (80PK-8) and 32 mm to 64 mm (80PK-10) 80PK-9 and 80PJ-9 General Purpose Probe • 80PK-9: Type-K thermocouple surface, air and non-caustic gases • 80PJ-9 operates with J-type thermometers • Measurement range: -40°C to 260°C • Probe length: 15.3 cm 80PK-11 Velcro Temperature Probe • Type-K thermocouple for hands free measurement of HVAC temperature measuring applications • Total length of cable: 1m (0.5m in cable, 0.5m in Velcro cuff insulation material; Hytrel) • Measurement range: -30ºC to 105ºC 80AK-A Thermocouple Adapter • Adapts Type-K thermocouple mini-connector to dual banana plug inputs • Measurement range and accuracy: probe dependent • Suitable for low voltage applications (below 30 V AC, 60 V DC) 80BK-A Integrated DMM Probe • Type-K thermocouple with standard banana jack • Convenient one piece construction • Compatible with DMMs with temperature measurement functions • Measurement range: -40 to 260ºC Contact Probes 80TK Thermocouple Module • Converts a DMM to a thermometer • For use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC) • Measurement range: -50 to 1000°C (probe dependent) 80T-150UA Universal Temperature Probe • Compatible with Fluke DMM • High accuracy, fast reading for low voltage (below 24 V AC, 60 V DC) applications • Measurement range: -50 to 150°C • Output: 1 mV/°C or 1 mV/°F (switchable) DMM Probes
- 131. 129 Temperature Accessories Temperature Probe Compatibility Chart 1) Requires 80TK 2) Requires 80AK 3) Fluke 116 only 4) Also requires 80CK-M Contact Probes 80PK-1 … 80PK-27 1 1 2 2 2 2 1 1 1 2 2 1 1 1 1 2 1 1 1 1 80PJ-1, 80PJ-9 80PT-25 1 113/114/115/116/117 175/177 179 233 287/289 27II/28II 8845A/8846A/8808A 77IV 83V 87V 88V 43B 120Series 190SeriesII/225C/S 1577 1587 51/52/53/54II 561 566/568 66/68 705/707 714 715 724 725 753/754 787 789 All accessories have a one year warranty DMM probes 80AK-A 3) 80BK-A 3) 80TK 80T-150UA Miscellaneous 80CK-M 1 1 2 2 2 2 1 1 1 2 2 1 1 1 1 2 1 1 1 1 80CJ-M 80PK-EXT4) 1 1 2 2 2 2 1 1 1 2 2 1 1 1 1 2 1 1 1 1 80PJ-EXT 80PT-EXT 700TC1, 700TC2 80PR-60 80PK-18 Pipe Clamp Temperature Probe Kit • 80PK-8 Pipe Clamp Temperature Probe • 80PK-10 Pipe Clamp Temperature Probe • Soft Case 80CK-M & 80CJ-M type K & J Male Mini-Connectors • Isothermal screw terminal for K or J wire • Suitable for up to 20 guage thermocouple wire • Color coded to industry standards (K-yellow, J-black) • Two per package Other Temperature Accessories 80PK-EXT, 80PJ-EXT and 80PT-EXT Extension Wire Kits • Extending and repairing J, K ot T-type thermocouple wires • Kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors • Maximum continuous exposure temperature: 260ºC • 80PK-EXT is compatible with K-type thermometers, 80PJ-EXT is designed for J-type thermometers and PT-EXT for T-type thermometers 700TC2 A kit of 7 mini-plug connectors Type J (black), two Type K (yellow), two Type E (purple), one Type T (blue), one Type R/S (green), one Thermocouple Plug Kits 700TC1 A kit of 10 mini-plug connectors Type J (black), one Type K (yellow), one Type T (blue), one Type E (purple), one Type R/S (green), one Type B or CU (white), one Type L (J-DIN) (blue), one Type U (T-DIN) (brown), one Type C (red), one Type N (orange), one
- 132. 130 Cases and Holsters Cases & Holsters Compatibility Chart Soft Cases C789 • Large fabric carrying case with 3 compartments, removable handle and shoulder strap C195 • Zipped carrying case with storage compartments • Allows hand or shoulder use Zipped carrying cases protect your meter; most cases come with belt loops so your meter is stored conveniently on your tool belt. C550 Tool Bag • Steel reinforced frame • Rugged ballistic cloth with heavy duty hardware • Large zippered storage compartment with 25 pockets • Weather resistant • Carry all your tools to the job 113/114/115/116/117 175/177/179 233 287/289 27II/28II 77IV 83V/87V/88V T5 T50 T100Series 321/322 333/334/335/336/337/902 353/355 1503/1507/1577/1587 9040/9062 1735/1740Series 430SeriesII 43B/120Series 190SeriesII 922 971 51/52/53/54II 561 566/568 570Series 61 63/66/68 705/707 712/714/715/717 718 724/725/726 753/754 787 789 Soft Cases Size (HxWxD) mm C12A 172 x 128 x 38 C23 225 x 95 x 58 C25 218 x 128 x 64 C33 280 x 115 x 55 C35 220 x 140 x 65 C43 318 x 230 x 90 C50 192 x 90 x 38 C75 179 x 103 x 26 For multiple test leads and accessories C90 205 x 90 x 72 C115 240 x 205 x 75 C116 240 x 230 x 65 C125 192 x 141 x 58 C195 231 x 513 x 231 C280 230 x 185 x 65 C345 240 x 360 x 200 For multiple test leads and accessories C437-II C550 333 x 513 x 231 For multiple test leads and accessories C781 269 x 141 x 90 C789 308 x 256 x 77 C799 305 x 229 x 165 Leather Cases C510 287 x 179 x 106 C520A 256 x 154 x 106 Holsters C10 154 x 77 x 45 H80M 190 x 95 x 43 Other H3 231 x 90 x 64 H5 192 x 90 x 38 H6 302 x 178 x 57 Hanging Kit (see page 132) ToolPak C12A C115 C23 C43 C116 C25 C50 C125/C781 C33 C75 C280 C35 C90 C345 Hard cases C20 256 x 154 x 106 C100 397 x 346 x 122 C101 305 x 360 x 105 C120 346 x 397 x 128 C290 410 x 474 x 135 C435 565 x 476 x 305 C800 230 x 385 x 115 C1600 260 x 390 x 200 For multiple test leads and accessories CXT80 28 x 32 x 13 CXT170 28 x 32 x 13 CXT280 28 x 32 x 13
- 133. 131 C20 Meter Case • Heavy duty case with carrying handle and accessories storage compartment • Top cover snaps onto back to serve as tilt stand Cases and Holsters C100 Meter and Accessory Case • Tough polyprophylene case C101 Hard Case The hard case that fits all Fluke industrial test tools. Configure the diced foam interior to store and protect what you need to carry with you. • Tough polyprophylene exterior shell • Interior cavity measures C120 and C290 Cases • Heavy duty cases with accessory storage compartments C435 Hard Rolling Case • Watertight hard case with rollers for 430 Series, 1735 and 1740 Series Power Quality products and accessories. The configurable foam securely holds any of these instruments during transit. C800 Meter and Accessory Case • Tough polyprophylene case • Accessories and manual compartments • Detachable lid C10 Meter Holster • Snap-on yellow holster absorbs shocks and protects meter from rough handling • Includes built-in stand and hanger loop H80M Holster + Magnetic Hanger • Snap-on yellow holster absorbs shocks and protects meter from rough handling • Magnet, hook and loop straps • General purpose hanger C510 Leather Meter Case • Oiled genuine top grain cowhide • Rugged construction with heavy duty stitching and reinforced rivets • Large tool belt loop and top flap to secure meter • Holds most Fluke DMMs, Thermometers, and Process Calibrators H3 Clamp Meter Holster • Fabric holster absorbs shocks and protects meter from rough handling. • Built-in pocket for lead storage • Convenient belt-loop with snap H5 Electrical Tester Holster • Rugged fabric holster includes flap for lead storage and built-in belt loop • Fits Fluke T3 and T5 testers Hard Cases Holsters H6 Infrared Thermometer Holster • Durable nylon holster • For Fluke 63, 66 and 68 Infrared Thermometers C520A Leather Tester Case • Oiled genuine top grain cowhide • Oil tanned for long life • Rugged construction with heavy duty stitching and reinforced rivets • Large tool belt loop and top flap to secure tester • Holds Fluke Electrical Testers Leather Cases All accessories have a one year warranty C1600 Meter and Accessories Case • Rugged molded plastic case • Deep interior large enough to hold and protect your tools • Lift out tray keeps everything organized • Snap open compartment on top of lid CXT80, CXT170, CXT280 Rugged Pelican Hard Case • Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case
- 134. 132 FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents. FlukeView Forms supports the following multimeters: Software and other Accessories IR189USB IR to USB interface cable (included with FVF-SC2 and FVF-Basic) • For customers who want to upgrade from their existing RS232 cable • Small adapter to connect the cable to the 189, 287, 289, 1653B or the 1550B is included. BP189 High Capacity Battery Enclosure (for Fluke 180 Series DMM) • Expand the battery life of your Fluke 187/189 up to 450 hours (over two weeks of continuous use). • Houses 4 ‘C’ cell batteries. • CAT III 1000 V, CAT IV 600 V Batteries and meter sold separately ToolPak (TPAK) The meter hanging solution • Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet • Combine components to meet most hanging needs See page 130 for compatibility chart Hanging KitSoftware FlukeView® Forms FOM Fiber Optic Meter The Fluke Fiber Optic Meter (FOM) helps you test and maintain fiber optic cables without having to buy a whole new meter. Plug the FOM directly into any DMM with a mV dc function and a 10 MΩ input impedance and quickly and accurately verify fiber optic cable system loss. Light sources and patch cords sold separately. FOS 850 & FOS 850/1300 Fiber Optic Light Sources A variety of light sources allow you to test different cable lengths. All accessories have a one year warranty FlukeView Forms Compatibility Chart Make extended logging easier Fiber Optics FVF Option Instrument Cable** Application Level FVF-UG Software only upgrade, Any instrument that supports Flukeview Forms Software No Cable included FVF Full (includes Designer)FVF-SC2 Fluke 280 Series, 789, 1550B, 1653B, 568,180 Series*, 53B, 54B USB / IR FVF-SC4 Fluke 8808A, 8845A, 8846A, 45*, 975 USB / Serial FVF-BASIC Fluke 280 Series, 789, 1550B, 1653B, 180 Series* USB / IR FVF BASIC FVF-SC5 8808A, 8845A, 8846A, 45* USB / Serial * Obsolete ** USB cables are not supported for Microsoft Windows NT 4.0
- 135. 133 L200 Probe Light • Attaches to any Fluke test probe • Bright white LED • 120 hours of battery life Other Accessories L205 Mini Hat Light Rugged high-intensity Xenon worklight • Attaches to a baseball cap • Includes a hat clip • Includes two AAA batteries • Waterproof L206 Deluxe LED Hat Light (hard hat not included) Attach it to a hard hat, a baseball cap, or even a panel door for all the light you need. • 3 super bright white LEDs – never burn out • Special hard-hat attachment included • 40-hour battery life • Includes three AAA batteries L210 Probe Light + Probe Extender • Includes L200 Probe Light and TP280 Test Probe Extenders • 20 cm probe extenders keep hands away from live circuits • Extender fits between modular test probe and test lead (total reach 30 cm) MC6 MeterCleaner™ Wipes (6-pack) MC50 MeterCleaner™ Wipes (50-pack) • Pre-moistened wipe removes dirt, oil and grease • One wipe easily cleans one meter • Safe on rubber, plastic and for environment (non-toxic) SV225 Stray Voltage Adapter Stray voltage can appear in electrical installations, due to the capacity between wires. This may result in erroneous readings on high impedance meters. The SV225 solves this without compromising safety. • On energized wires, the meter will indicate the real voltage. • On non-energized circuits the meter will read close to zero (even if there are stray voltages). • It can be used with all modern meters with standard input spacing. • Rated CAT III 1000 V, CAT IV 600 V TL225-1 SureGrip™ Stray Voltage Adapter Test Lead Kit Kit includes: • SV225 Stray Voltage Eliminator • TL224 SureGrip™ Silicone Test Lead Set (right to straight) • TP238 SureGrip™ Insulated Test Probe Set • C75 Accessory Case Lights Stray Voltage Adapter 80K-6 and 80K-40 A high voltage probe that allows a multimeter to measure up to 6,000V or 40,000V respectively. Intended for low energy applications only High Voltage Probes All accessories have a one year warranty Meter Cleaners
- 136. 134 Fuse and Warranty Information A V IR Size in mm Part nr qty 1 63mA (slow) 250V 6.35x32 163030 125mA (slow) 250V 6.35x32 166488 250mA (slow) 250V 6.35x32 166306 315 mA 1000V 10KA 6.35x32 2279339 440mA 1000V 10kA 10.3x34.9 943121 500mA 250V 1500A 5x20 838151 630mA 250V 1500A 5x20 740670 1A 600V 10kA 10.3x34.9 830828 1A 500V 50kA 6.35x 32 2530449 1.25A 600V 6.35x32 2040349 3.15A 500V 6.35x32 2030852 11A 1000V 17kA Replaced by 11A, 1000V, 20kA fuse; 803293 11A 1000V 20kA 10.3x38.1 803293 15A 600V 100kA 10.3x38.1 892583 20A 600V Replaced by 15A, 600V, 100kA fuse; part nr. 892583 See the back of your Fluke test tool or user manual for the fuses installed. For manuals check the Fluke website in the product section. For Fuse Replacement Guide check the Fluke website in the service section. Fuse Replacement Information Product Warranty Service Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service, for the warranty period listed unless local law requires a longer period. The warranty period is listed in the ordering information section of the product specification and begins on the date of shipment. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries or to any product which, in Fluke’s opinion, has been misused, altered, neglected or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption. Lifetime Warranty Each Fluke 20, 70, 80, 170, 180 and 280 Series DMM purchased after October 1, 1996 will be free from defects in material and workmanship for its lifetime. This warranty does not cover fuses, disposable batteries and damage from accident, neglect, contamination, misuse or abnormal conditions of operation or handling, including overvoltage failures caused by use outside the DMM’s specified rating, or normal wear and tear of mechanical components. This warranty covers the original purchaser only and is not transferable. For ten years from the date of purchase, this warranty also covers the LCD. Thereafter, for the lifetime of the DMM, Fluke will replace the LCD for a fee based on then current component acquisition costs. To establish original ownership and prove date of purchase, please complete and return the registration card accompanying the product. Fluke will, at its discretion, repair at no charge, replace or refund the purchase price of a defective product purchased through a Fluke authorized sales outlet and at the applicable international price. Fluke reserves the right to charge for importation costs of repair/replacement parts if product purchased in one country is sent for repair elsewhere. Send defective product with a description of the problem to the nearest Fluke Authorized Service Center, postage and insurance prepaid. Fluke will pay return transportation for product repaired or replaced in- warranty. Before making any non-warranty repair, Fluke will estimate cost and obtain authorization, then invoice you for repair and return transportation. THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. AUTHORIZED RESELLERS ARE NOT AUTHORIZED TO EXTEND ANY DIFFERENT WARRANTY ON FLUKE’S BEHALF. Since some states do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.
- 137. 135
- 138. 136
- 140. © Copyright 2012, Fluke Corporation. All rights reserved. Printed in the Netherlands, 01/12 Data subject to alteration without notice. Pub_ID: 11882-eng Fluke. Keeping your world up and running.® Fluke Corporation P.O. Box 9090 Everett, WA USA 98206 Web: www.fluke.com Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands Web: www.fluke.eu For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/AFrica +31 (0)40 2 675 200) or Fax +31 (0)40 2 675 222 In Canada (905) 890-7600 or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Fluke (UK) Ltd. 52 Hurricane Way Norwich Norfolk NR6 6 JB United Kingdom Tel.: (020) 7942 0700 Fax.: (020) 7942 0701 E-mail: industrial@uk.fluke.nl Web: www.fluke.co.uk