Fpc v2 ch7 energy management solution_20161213

Energy Management
Solution
Energy Management Solution P 7-11
Software Utility P 7-64
Smart Power Meter & Devices P 7-53
● Power Meter Concentrator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 7-7
● Three-phase Smart Power Meter
 PM-3133-RCT/-MTCP/-CPS- - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 7-8
 PM-3133/-MTCP/-CPS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 7-10
 PM-3033/-MTCP/-CPS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 7-12
● Single-phase Smart Power Meter - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 7-14
● Multi-circuit Smart Power Meter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - P 7-18
● 8-channel True RMS Input Module - - - - - - - - - - - - - - - - - - - - - - - - - - - P 7-21
● Industrial Multi-power-meter Display - - - - - - - - - - - - - - - - - - - - - - - - - P 7-23
Power Meter Concentrator P 7-22
Energy Management Solutions - EM Brochure
True RMS Input Module
TouchPAD - VPD series
Smart Power Meter
Smart Power Meter Concentrator
Power Data Management Software
Or refer to http://www.icpdas.com/root/support/catalog/pdf/Brochure/EM-Brochure-en.pdf

7-1
ICPDAS Product Catalog
ICP DAS CO., LTD. Professional Provider of High Quality Industrial Computer Products and Data Acquisition Systems Vol. FPC 2.05.09
1. Energy Management Solution
For the resources of the earth are getting depleted faster in recent years, countries around the world and all walks of
life all set off a wave of energy saving and carbon reduction in order to avoid the waste of resources and pursue living
a sustainable life to extend earth's resources. Under the trend of energy saving and carbon reduction, power monitoring
gradually becomes an important project for maximizing energy efficiency by power monitoring always contributing to
significant energy savings no mater on the individual, corporate or national level. In order to achieve more efficient use of
energy and reduce resources consumption, ICP DAS provides an innovative total solution in energy saving by connecting
PMC/PMD (Power Meter Concentrator) to the Power Meters via RS-485 or Ethernet interface, it can measure and monitor
the power consumption of the devices, machines, lighting, air conditioning or other electricity equipments. In addition,
PMC/PMD also provides power demand management and alarm notification functions. With the integration of ICP DAS I/O
modules and the standard Modbus I/O devices, it can perform logic control or load shedding of the devices based on the
power demand in real time. PMC/PMD also supports Modbus TCP/RTU protocol for seamless integration with SCADA. So
that the administrator can monitor the status of power consumption of each device and perform statistics and analysis of
the power information, thus improving the overall efficiency in electricity consumption to save costs on utility bills.
This innovative total solution for energy saving includes: front-end Smart Power Meter, Power Meter Concentrator, back-end
software tool for database import operation (PMC Data Server) and InduSoft SCADA software. In addition to hardware
devices, ICP DAS also provides total solution so that the user could easily view power data by their mobile phones or PC,
the administrator could set up the system quickly and the data can be recorded in real time for energy consumption inquiry
to achieve effective energy saving. During the early stage, if the scale of the application is small, the user could simply
use Smart Power Meter and PMC/PMD to set up a simple power monitoring system, once the scale of the application is
expanded, the user could get the back-end software tool involved and build an easy-to-expand power monitoring system
via blocks stacked structure. By this way, the system will be highly flexible and could be implemented in phases to meet
various requirements.
 System Architecture S t A hit t

7-2Website: http://www.icpdas.com E-mail: service@icpdas.com Vol. FPC 2.05.09
PACProductsPanelProducts
RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
2. Power Meter Concentrator
No extra software tool, using browsers to
perform system operations
Featuring web-based HMI for easy operations, the user could
connect to PMC/PMD webpage via browsers to view the power
data, set up system parameters, manage power demand and
perform logic editing function for alarm notification.
 Display real-time or historical power data trend
In addition to display power data of the power meter in text form,
the power data can also be displayed in real-time and historical
trend chart for user to easily identify the variation of the electricity
usage of the devices.
 Built-in Micro SD card for power data logging
The PMC/PMD features a built-in Micro SD card. After the PMC/
PMD retrieving the power data from the power meter, the system
will save the power data in CSV format in the Micro SD card and
regularly send back the data files to the backend management
center for data analysis and statistics.
 FTP Server/Client for data file management and file recovery mechanism supported
The built-in FTP Client function of PMC/PMD allows regular transmission of the power data logger files saved in the
Micro SD card of PMC/PMD to the backend management center for data analysis and statistics. The PMC/PMD offers
a complete data file recovery mechanism so that when experiencing network disconnection, the data log files will be
recovered after the network is resumed to ensure the system operates properly. With the FTP Server of PMC/PMD, the
user could also use FTP Client utility to retrieve the power data files saved in PMC/PMD from the PC side easily.
PMC PMD
PMC/PMD Features:

7-3
 Provide Timer Function
Timer function provides Timeout/Not Timeout status for condition evaluations. With the timer function, the users are able
to edit logic that requires timing approach. In addition, the timer function can be reset/started in real time that increases
flexibility when performing logic control.
 Provide historical power data statistics
report
PMC/PMD provides historical data report inquiry and
display function, the easy-to-read daily and monthly report
of the historical power data would help to understand
current electricity usage of the devices.
 Built-in IF-THEN-ELSE logic engine for thought-out power demand management and
auto alarm notification when unusual events occurs
PMC/PMD is equipped with IF-THEN-ELSE logic engine. The user could complete the control logic via web page and
download the logic rules to the PMC/PMD. The logic engine will loop execute the rules in order. By editing the IF-
THEN-ELSE logic rules, the user could include the following information in the IF condition, such as: “fail to connect
to power meter”, “FTP upload failed”, “insufficient disk space”, “power demand management”, “abnormal power data”,
etc. In addition, the Schedule setting and channel values of I/O modules that are connected to the PMC/PMD can be
also included in the IF condition. When the evaluation of the IF condition is matched, the corresponding Action will be
executed (such as: Email/SMS alarm message sending or AO/DO channel value of the I/O modules setting). By this way,
the user could quickly implement applications for power demand management, electricity control of the devices and
alarm notification sending.
 Provide Schedule function
PMC/PMD provides Schedule function that allows to edit
logic for applications that requires Schedule function. The
Calendar interface allows to easily set up the schedule for
weekdays or weekends so that the user could schedule the
operations for the devices as required for power saving.
 Modbus TCP/RTU for seamless integration with SCADA
The PMC/PMD supports Modbus TCP/RTU Slave protocol to connect to SCADA software or HMI devices in control
center so that it could perform real-time monitoring and control of the electricity usage for the devices. Therefore, the
regulation of the system will be more flexible.

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
 On-Site Power data viewing and Power Meter setting
PMD (Power Meter Concentrator with Display) series is
equipped with TFT LCD (with Touch Panel). It provides an easy
way for viewing the power data and set up the Power Meter
parameters on sites.
 Support SNMP Function
In addition to Modbus protocol, PMC/PMD also supports SNMP
function that allows seamless integration with IT Management
software. The users could integrate PMC/PMD with the existing
management system and collect the power data of each device
by SNMP function easily.
 Provide “Power Usage Effectiveness (PUE)” calculation operation
Power usage effectiveness (PUE) is a
measure of how efficiently a computer
data center uses energy; specifically, how
much energy is used by the computing
equipment (in contrast to cooling and other
overhead). PUE is the ratio of total amount
of energy used by a computer data center
facility to the energy delivered to computing
equipment. The PUE will be greater than 1.
The larger the PUE number the less efﬁcient
your utilization is. PMC/PMD provides the
PUE calculation operation and also display
the PUE data in two modes (Real-Time and
History) through Web page.
 Support a variety of wide-range I/O modules to achieve power control and load
shedding of the devices
According to the requirements of the
application and based on the devices
connected, the PMC/PMD is able to
connect to M-7000 I/O modules,
standard Modbus TCP/RTU Slave
modules or DO Relay channel of the
PM Series power meter for real time I/
O control operation of the devices, the
abundant selections enable maximum
ﬂexibility for system set up and power
saving.

7-5
 Provide multi-phase multi-circuit power measurement function
PM-3033: 1 Three Phase Circuit
PM-3133: 1 Three Phase Circuit
PM-3112: 2 Single Phase Circuits
PM-3114: 4 Single Phase Circuits
PM-4324: 8 Three Phase Circuits or 24 Single Phase Circuits
 Support multiple communication interface
• RS-485
• Ethernet
• CANopen
 Support multiple standard communication protocols:
• Modbus RTU
• Modbus TCP
• CANopen
 Support 2 built-in Power Relay Output
 With CT W Accuracy Better than 0.5% (PF=1)
 Clip on CT for easy installation
 Compact size, easy to install, suitable for a variety of industrial applications
3. Smart Power Meter & Devices
ess:
PM-3133
PM-3033
PM-3112
PM-3114
PM-4324
TCP
RTU
PMM-4324
 Built-in HMI for Infermation Display of Power Meters
 IP40/IP60 Ingress Protection for Front Panel
 Support Modbus TCP/RTU Protocols
 Support Max. of 8 Single-phase/3-phase Power Meters
(PM-3xxx series) or One PM-4324
 Support Max. of 4 Modbus/TCP Connections for SCADA
Software
 Support Phase Sequence Detection
 Support Fine Tune of Voltage and Current Ratio
 8-channel True RMS Input
 ±0.15% Factory Calibrated Accuracy
 RMS Input Range: +150 mVrms ~ +10 Vrms
 For Standard Operation with Frequencies:
45 Hz ~ 10 KHz
 Individual Channel Conﬁgurable
 4 kV ESD Protection
 ±35 VDC Overvoltage Protection
 2500 VDC Intra-module Isolation
True RMS Input Module Features Industrial Multi-power-meter Display
PM Smart Power Meter Features
M-7017RMS
DCON
RTU
TCP
RTU
VPD-173-PM
7” Series
VPD-143N-PM
4.3” Series VPD 173 PM
TPD-433-PM
TPD-703-PM

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
4. Software Utility
Power Meter Utility
Power Meter Utility has to be installed on PC and it enables to retrieve and display the power measurement values
that measured by power meter via COM Port or Ethernet. The users will be able to read the power measurement
values and to perform parameter settings of the meter. When connecting with ICP DAS power meters by RS-485
communication protocol interface, it requires to convert RS-232 or USB on PC to RS-485 communication interface,
converter modules (such as ICP DAS I-7561, I-7520) might be required; When connecting with ICP DAS power
meters by Ethernet interface, it must setup the correct IP address to retrieve the power measurement values easily.
Features:
 By Modbus RTU or Modbus TCP protocol, it enables to connect with ICP DAS Power Meters and data retrieving.
 Real time monitor power measurement values of the meter.
 Real time setting up parameters of the meter.
 Restore the parameters of the meter to default settings.
 Support Data Log function
PMC Data Server
The PMC Data Server is a database utility designed for connecting to the PMC/PMD concentrators. When PMC/PMD
Data Server is connected to these PMC/PMDs by Ethernet, the PMC/PMDs will send the power data logger ﬁles to
the PMC Data Server at scheduled time, and these power data will be transformed to MS Access/MS SQL/MySQL
database format for easy data review or inquiry. During the whole process of system development, no programming
is required. It takes only a few settings for users to quickly retrieve and view the power data of the devices based on
database system and furthermore, enables further process of the data for statistics and analysis.

7-7
Power Meter Concentrator
PMC-5151
Power Meter Concentrator With Display
10.4” TFT LCD
PMD-4201
7” TFT LCD
PMD-2201
Features:
 No extra software tool is required, using browsers to operate system
 Support at most 24 ICP DAS Modbus Power Meter and 8 Modbus I/O modules
(COM2, COM3 and LAN interface can connect to Max. 16 power meters.)
 Display real-time or historical power data (in data table or chart form)
 Provide power data statistics report (Daily and Monthly report)
 Data file auto send-back & recovery when network is resumed after disconnection
 Built-in IF-THEN-ELSE logic engine for power demand management
 Provide alarm message notification function via Email or SMS
(for SMS message sending, GTM-203M-3GWA is required)
 Adjust device operations by its power status via Modbus I/O modules
 Provide Schedule function for operations of I/O modules (devices)
 Support Modbus TCP/RTU Slave protocol for seamless integration with SCADA
 Support Standard SNMP Protocol
Features:
 Provide 7"/10.4" Touch Panel for On-Site operations
 Provide remote connection using browsers to login for operations
 Support up to 24 ICP DAS Modbus Power Meter and 8 Modbus I/O
 (COM2, COM3 and LAN interface can connect to Max. 16 power meters.)
 Provide real-time/historical power data statistics report
 Provide microSD card to store power data information
 Data file auto send-back & recovery when disconnected network is resumed
 Built-in IF-THEN-ELSE logic engine for power demand management
 Provide alarm message notification function via Email
 Adjust device operations by its power status via Modbus I/O modules
 Provide Schedule function for operations of I/O modules (devices)
 Support Modbus TCP/RTU Slave protocol for integration with SCADA
 Support SNMP Protocol
Introduction:
The PMC-5151 is a web-based intelligent Power Meter Concentrator developed by ICP DAS. It offers webpage interface, and features
various functions such as: power data collection, logic control, power demand management, data logger and alarm notification
functions. PMC-5151 allows connections to ICP DAS Smart Power Meters via RS-485 or Ethernet interface to read the power data of the
devices measured by the power meters; and then real-time record the power values in the data logger file. It also provides data logger
file auto send-back function; together with PMC Data Server software or SCADA software, it allows collection and analysis of the power
data.
Introduction:
The PMD is a web-based intelligent Power Meter Concentrator with Display. It offers webpage interface, and features various functions
such as: power data collection, logic control, power demand management, data logger, local display/Web page data display and alarm
notification functions. PMD allows connections to ICP DAS Smart Power Meters via RS-485 or Ethernet interface to read and record the
power data of the devices measured by the power meters. PMD also provides data logger file auto send-back function; together with
PMC Data Server software or SCADA software, it allows collection and analysis of the power data.
PMD is equipped with 7"/10.4" TFT LCD (with Touch Panel). It provides an easy way for viewing the power data and setting the system
parameters on sites. In addition, it can also access built-in Web Server on the PMD via browsers for the above operations. PMD also
offers Modbus TCP/RTU Slave function that allows seamless integration with most SCADA software

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
Three-phase Smart Power Meter
PM-3133-RCT/-MTCP/-CPS
Speciﬁcations:
Features:
 True RMS Power Measurements
 Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
 Current Measurements Up to 2000 A
 Voltage Measurements Up to 500 V
 Rogowski Coil Soft CT for Easy Installation
 W Accuracy Better than 1% (PF=1; Input Current >50A)
 Supports RS-485, Ethernet (PoE) or CANopen Interface
 Supports Modbus RTU, Modbus TCP or CANopen Protocol
 Supports 2 Power Relay Output (Form A)
 Total Harmonic Distortion (THD)
Introduction:
ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3133-RCT that gives you access to real-time
electric usage for three-phase power measurement. With its high accuracy (<1%, PF=1; Input Current >50A), this series can be used
to both low voltage primary side and medium/high voltage secondary side and enables the users to obtain reliable and accurate energy
consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power
meters monitoring equipment with Rogowski Coil CT is "rope-style" Current Transformer which delivers "Easy Installation" features for
large window size (55 ~ 105mm) and mechanical ﬂ exibility for tight space.
It operates over a wide range of input voltages 10 ~ 500 VAC which allows universal compatibility. Also, with 2 channels relay outputs,
it can be linked with sirens or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy
integration.
Models PM-3133-RCT PM-3133-RCT-MTCP PM-3133-RCT-CPS
AC Power Measurement
Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Measurement Voltage 10 ~ 500 V
Measurement Current CTØ55 mm (500 A), CTØ80 mm (1000 A), CTØ105 mm (2000 A)
Measurement Frequency 50/60 Hz
W Accuracy Better than 1% (PF=1; Input Current >50 A)
Power Parameter
Measurement
True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent
Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF),
Frequency, THD
Data Update Rate 1 Second
Communication
Interface RS-485 Ethernet (PoE) CANopen
Protocol Modbus-RTU Modbus TCP CANopen
Baud rate
9600,19200 (default), 38400,
115200; DIP Switch Selectable
-
125 k (default), 250 k, 500 k, 1 M;
DIP Switch Selectable
Data format
N,8,1 (default);
N,8,2; E,8,1; E,8,2; O,8,1; O,8,2
- -
Isolation 3000 VDC - 3000 VDC
Alarm Output
Power Relay Form A (Normal Open) x 2; Relay Contact Voltage Range: 5 A @ 250 VAC (47 ~ 63Hz), 5 A @ 30 VDC
Power
Power Input +12 ~ 48 VDC +12 ~ 48 VDC or PoE +12 ~ 48 VDC
Power Consumption 2 W
Environment
Temperature Operating Temperature: -20 ~ +70˚C / Storage Temperature: -25 ~ +80˚C
Ambient Relative Humidity 10% ~ 90% RH, Non-condensing

7-9
Installation
Rogowski Coil Soft CT Installation
A B C D
Models A B
PM-3133-RCT500P 55.0 68.5
PM-3133-RCT1000P 80.0 93.5
PM-3133-RCT2000P 105.0 118.5
RS-485 Interface
PM-3133-RCT500P Modbus RTU, 3-phase power meter, 500A Rogowski Coil CT
Ethernet Interface
PM-3133-RCT500P-MTCP Modbus TCP, 3-phase power meter, 500A Rogowski Coil CT
CANopen Interface
PM-3133-RCT500P-CPS CANopen, 3-phase power meter, 500A Rogowski Coil CT
Ordering Information:
Dimensions (Units: mm):
Available soonAvailable soon
Available soonAvailable soon

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
PM-3133/-MTCP/-CPS
Models PM-3133 PM-3133-MTCP PM-3133-CPS
Measurement Current CTØ10 mm (60 A); CTØ16 mm (100 A); CTØ24 mm (200 A); CTØ36 mm (300 A); CTØ36 mm (400 A)
W Accuracy Better than 0.5% (PF=1)
Power Parameter
Measurement
True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA),
Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency
Communication
RS-485
Protocol Modbus-RTU - -
Baud rate
9600,19200 (default), 38400,
- -
Data format N,8,1 - -
Isolation 3000 VDC - -
Ethernet (PoE) Protocol - Modbus TCP -
CANopen
Protocol - - CANopen
Baud rate - -
125 k (default), 250 k, 500 k, 1 M;
Isolation - - 3000 VDC
Alarm Output
Power Relay Form A (Normal Open) × 2; Relay Contact Voltage Range: 5 A @ 250 VAC (47 ~ 63Hz), 5 A @ 30 VDC
Power
Environment
Speciﬁcations:
Features:
 Current Measurements Up to 400 A with Different CT Ratio
 Clip-on CT for Easy Installation
 W Accuracy Better than 0.5% (PF=1)
 IEC 61010-1and EN 61010-1
Introduction:
ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3133 series that gives you access to real-time
electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3133 series can be applied to both
low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy
consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters
are equipped with revolutionary wired clip-on CT (various types, support input current up to 400 A). It operates over a wide input
voltages range 10 ~ 500 VAC which allows worldwide compatibility. And with 2 channels relay outputs, it can be linked with sirens or
lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration. You can use CT's
that you currently own with PM-3133P (without CTs) Power Meter. The CT inputs of the PM-3133P can handle a maximum of 333mV of
AC current.

7-11
Rear ViewRight ViewFront View Top ViewLeft View Bottom View
Power
RUNLED indicators
DO1
DO0
PM-3133
RS-485 Interface
PM-3133P Modbus RTU, 3-phase power meter (Compatible with CTs from 50 to 1000 A/333 mV output)
PM-3133-100 Modbus RTU, 3-phase power meter (60 A)
PM-3133-360P Modbus RTU, 3-phase power meter (300 A)
PM-3133-400P Modbus RTU, 3-phase power meter (400 A)
Ethernet Interface
PM-3133-100-MTCP Modbus TCP, 3-phase power meter (60 A)
PM-3133-360P-MTCP Modbus TCP, 3-phase power meter (300 A)
PM-3133-400P-MTCP Modbus TCP, 3-phase power meter (400 A)
CANopen Interface
PM-3133-100-CPS CANopen, 3-phase power meter (60 A)
PM-3133-360P-CPS CANopen, 3-phase power meter (300 A)
PM-3133-400P-CPS CANopen, 3-phase power meter (400 A)
--
CT size (measurement)
100: CTΦ10 mm, 60 A Max.
160: CTΦ16 mm, 100 A Max.
240: CTΦ24 mm, 200 A Max.
360P: CTΦ36 mm, 300 A Max.
400P: CTΦ36 mm, 400 A Max.
Current Transformers
(Secondary voltage 333mV)
Communication
: RS-485
CPS: CANopen
MTCP: Modbus TCP
RS-485 Interface
CANopen Interface
Ethernet Interface
x xx P xx x
33
6.5
100
90
37.2
35.6
37.2
110127
Appearance:
Selection Guide:

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
Models PM-3033 PM-3033-MTCP PM-3033-CPS
Measurement Current 1A or 5A
Power Parameter Measurement
True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh),
Apparent Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh),
Power Factor (PF), Frequency
Communication
RS-485
Baud rate
9600,19200 (default), 38400,
- -
Data format
N,8,1 (default); N,8,2; E,8,1;
E,8,2; O,8,1; O,8,2
- -
CANopen
Baud rate - -
125 k (default), 250 k, 500 k, 1 M;
Isolation - - 3000 VDC
Power
Environment
PM-3033/-MTCP/-CPS
Speciﬁcations:
Features:
 Direct input of secondary side 1A/5A CT
 Supports Modbus RTU/Modbus TCP or CANopen Protocol
 IEC 61010-1 and EN 61010-1
 IEC 61010-1and EN 61010-1
Introduction:
electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3033 series can be applied to both
low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy
consumption readings from the monitored equipments in real time under operation.
Direct input from “secondary side 1A/5A” type CTs. Dedicated CTs are no longer needed, which lowers the cost of implementation. It
operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. It also supports Modbus RTU, Modbus
TCP or CANopen protocols for easy integration.

7-13
33
6.5
100
90
37.2
35.6
37.2
110
116.5
127
PM-3033
RS-485 Interface
PM-3033 Modbus RTU, 3-phase power meter (1A/5A CT Input type)
Ethernet Interface
PM-3033-MTCP Modbus TCP, 3-phase power meter (1A/5A CT Input type)
CANopen Interface
PM-3033-CPS CANopen, 3-phase power meter (1A/5A CT Input type)
-
Communication
: RS-485
CPS: CANopen
MTCP: Modbus TCP
x xx
Direct input of
secondary side
1A/5A CT
AC Measurement
10 ~ 500 V
Aux. Power Input
+12 ~ 48 VDC
LED indicators
CT Installation and Wiring:
Selection Guide:

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
PM-3112/-MTCP/-CPS
PM-3114/-MTCP/-CPS
PM-3112 PM-3114
Models PM-3112 PM-3114 PM-3112-MTCP PM-3114-MTCP PM-3112-CPS PM-3114-CPS
Wiring 1P2W-2CT 1P4W-4CT 1P2W-2CT 1P4W-4CT 1P2W-2CT 1P4W-4CT
Input Voltage 10 ~ 300 V
Input Current CTØ10 mm (60 A); CTØ16 mm (100 A); CTØ24 mm (200 A)
Input Frequency 50/60 Hz
Starting Current >0.03A ( 60A ), >0.05A (100A ), >0.09A( 200A )
Power Parameter
Measurement
True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA),
Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency
Communication
RS-485
Baud rate
9600,19200 (default), 38400,
- -
Data format N,8,1 - -
CANopen
Baud rate - -
125 k (default), 250 k, 500 k, 1 M;
Alarm Output
Power Relay Form A (Normal Open) × 2; Relay Contact Voltage Range: 5 A @ 250 VAC (47 ~ 63 Hz), 5 A @ 30 VDC
Power
Input Range +12 ~ 48 VDC +12 ~ 48 VDC +12 ~ 48 VDC
Environment
Single-phase Smart Power Meter
Speciﬁcations:
Features:
 Energy Analysis for 1P2W, 1P4W
 Clip-on CT for Easy Installation
 Supports RS-485, Ethernet or CANopen Interface
 IEC 61010-1and EN 61010-1
Introduction:
electric usage for single-phase power measurement. With its high accuracy (< 0.5%, PF=1 ), the PM-3000 series can be applied to
both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy
consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power
meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 200 A). It operates over a wide
input voltages range 10 ~ 300 VAC which allows worldwide compatibility. And with 2 channels relay outputs, it can be linked with sirens
or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration.

7-15
Power
RUN
LED indicators
1P2W-2CT
1P4W-2CT
1P4W-4CT
DO1
DO0
PM-311
RS-485 Interface
PM-3112-100
Modbus RTU, 2 single-phase circuits
Power Meter with 2 CTs (60 A)
PM-3112-160
PM-3112-240
Ethernet Interface
PM-3112-100-MTCP
Modbus TCP, 2 single-phase circuits
PM-3112-160-MTCP
PM-3112-240-MTCP
CANopen Interface
PM-3112-100-CPS
CANOpen, 2 single-phase circuits Power
Meter with 2 CTs (60 A)
PM-3112-160-CPS
PM-3112-240-CPS
RS-485 Interface
PM-3114-100
power meter (60 A)
PM-3114-160
power meter (100 A)
PM-3114-240
power meter (200 A)
Ethernet Interface
PM-3114-100-MTCP
power meter (60 A)
PM-3114-160-MTCP
power meter (100 A)
PM-3114-240-MTCP
power meter (200 A)
CANopen Interface
PM-3114-100-CPS
CANOpen, 4 single-phase circuits
power meter (60 A)
PM-3114-160-CPS
power meter (100 A)
PM-3114-240-CPS
power meter (200 A)
Channel
2: 2 Circuits
4: 4 Circuits
--
100: CTΦ10 mm (0 ~ 60 A)
160: CTΦ16 mm (0 ~ 100 A)
240: CTΦ24 mm (0 ~ 200 A)
Communication
: RS-485
CPS: CANopen
MTCP: Modbus TCP
RS-485 Interface
CANopen Interface
Ethernet Interface
x x xx xx x
110
127
3390
100
37.2
35.6
37.2
6.5
35.6
33
100
90
Appearance:
Selection Guide:

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
PM-4324/-MTCP/-CPS
PM-4324A/-MTCP/-CPS
Multi-circuit Smart Power Meter
Features:
 8 Three Phase Circuits or 24 Single Phase Circuits
 2 Independent main circuit inputs for PM-4324A series
 Easy install with split core CT
 Support RS-485, Ethernet or CAN bus Interface
 Support 2 Power Relay Output (Form A)
Introduction:
The PM-4324 series multi-circuit power meter monitors up to 8 three-phase circuits or 24 single-phase circuits, or any combination
of single or three-phase circuits. The PM-4324 series can measure up to 24 currents via external Current Transformers (CTs). This
flexibility makes the PM-4324 series perfect for multi-tenant facilities such as residential projects, office buildings and shopping malls.
This compact instrument is designed to easily fit into existing panelboards or be flush mounted nearby, thus eliminating the need for
expensive retrofit projects or for allocating extra space for the device.
The PM-4324A is the same model as the PM-4324, except for the AC Measurement. The PM-4324A has 2 separate main circuit inputs
that can use in the different power system.
Specifications:
Models PM-4324/PM-4324A
PM-4324-MTCP/
PM-4324A-MTCP
PM-4324-CPS/
PM-4324A-CPS
Measurement Current CTØ10 mm (60 A); CTØ16 mm (100 A); CTØ24 mm (200 A); CTØ36 mm (300 A); CTØ36 mm (400 A)
Power Parameter
Measurement
True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power
(kVA), Apparent Energy (kVAh),Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency
Communication
Interface RS-485 Ethernet CAN Bus
Protocol Modbus-RTU Modbus TCP CANopen
Baud rate
9600,19200 (default), 38400,
-
125 k (default), 250 k, 500 k, 1 M;
Data format
N,8,1; N,8,2; E,8,1; E,8,2; O,8,1;
O,8,2
- -
Isolation 3000 VDC - 3000 VDC
Alarm Output
Power Relay Form A (Normal Open) x 2; Relay Contact Voltage Range: 5 A @ 250 VAC (47 ~ 63 Hz), 5 A @ 30 VDC
Power
Input Range +85 ~ +264 VAC
Mechanical
Dimensions / Casing 237 mm x 52 mm x 134 mm (W x L x H) / Plastic
Module Installation DIN-Rail Mounting; Wall mounting
Environment

7-17
Appearance:
Selection Guide:
-
100P: CTΦ10 mm, 60 A Max.
160P: CTΦ16 mm, 100 A Max.
240P: CTΦ24 mm, 200 A Max.
360P: CTΦ36 mm, 300 A Max.
400P: CTΦ36 mm, 400 A Max.
Current Transformers
(Secondary voltage
333mV)
2 independent main circuit inputs
Communication
: RS-485
CPS: CANopen
MTCP: Modbus TCP
x x PA x x xxPM-4324 -
CANopen Interface
PM-4324-100P-CPS CANOpen, Multi-Circuit Power Meter (60 A) PM-4324A-100P-CPS CANOpen, Multi-Circuit Power Meter (60 A)
PM-4324-360P-CPS CANopen, Multi-Circuit Power Meter (300 A) PM-4324A-360P-CPS CANopen, Multi-Circuit Power Meter (300 A)
PM-4324-400P-CPS CANopen, Multi-Circuit Power Meter (400 A) PM-4324A-400P-CPS CANopen, Multi-Circuit Power Meter (400 A)
RS-485 Interface
PM-4324P Modbus RTU, Multi-Circuit Power Meter (Can be directly input from the secondary side of 333mV CT)
PM-4324-100P Modbus RTU, Multi-Circuit Power Meter (60 A) PM-4324A-100P Modbus RTU, Multi-Circuit Power Meter (60 A)
Ethernet Interface
PM-4324-100P-MTCP Modbus TCP, Multi-Circuit Power Meter (60 A) PM-4324A-100P-MTCP Modbus TCP, Multi-Circuit Power Meter (60 A)
V2 reference voltage
Up to 24 currents via external
Current Transformers (CTs)
2-CH Relay output
Node ID
Baud rate
AC Measurement
10 ~ 500 V (A, B, C, N)
Aux. Power Input 85 ~ 264 VAC
RS-485
PM-4324A
PM-4324

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
● IntroductionCT for Smart Power Meter
38.4±0.3
38.4±0.3
57±0.3
35.7±0.3
57±0.3
35.7±0.3
9.7±0.3
9.7±0.3
19±0.319±0.3
81.5±0.381.5±0.3
15.8±0.3
15.8±0.3
4
4
22±0.3
22±0.3
FrTopViewTT
39
25
23
39
23.3
14.8
26
22 45.5
49
77
24
34.443
47.2
29
32
47
16
10
18
31.5
26
100: CTΦ10mm (60 A Max.)
160: CTΦ16mm (100 A Max.)
240: CTΦ24mm (200 A Max.)
Left View Left View
Left ViewLeft View
Left View
Front View Front View
Front ViewFront View
Front View
360P: CTΦ36mm (300 A Max.)
400P: CTΦ36mm (400 A Max.)
Clip-on CT Installation
Rogowski coil Soft CT Installation
DIN-Rail Mounting
(EX: PM-3133)
RCT1000P: CTΦ800mm (1000 A Max.)
A B C D
A B C
Installation

7-19
Communication
Interface RS-485
Bias Resistor
No (Usually supplied by the RS-485
Master. Or, add a tM-SG4 or SG-785.)
Baud Rate 1200 to 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog
Yes, Module (1.6 Seconds),
Communication (Programmable)
LED Indicators/Display
System LED Indicator 1 as Power/Communication Indicator
Isolation
Intra-module Isolation,
Field-to-Logic
2500 VDC
EMS Protection
ESD (IEC 61000-4-2)
±4 kV Contact for each Terminal
±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Power
Reverse Polarity Protection Yes
Input +10 ~ +30 VDC
Consumption 0.9 W
Mechanical
Dimensions (L × W × H) 123 mm × 72 mm × 35 mm
Installation DIN-Rail
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
Analog Input
Channels 8
Wiring Differential
Input Range
0 ~ +10 Vrms, 0 ~ +5 Vrms,
0 ~ +1 Vrms, 0 ~ +500 mVrms,
0 ~ +150 mVrms
Resolution 16-bit
Accuracy
Sinusoid
50/60 Hz ±0.15% of FSR
45 Hz to 10 kHz ±0.5% of FSR
Non-Sinusoid
Crest Factor = 1 to 2 ±0.2% of FSR
Crest Factor = 2 to 3 ±0.35% of FSR
DC
0 ~ +10 Vrms/ 0 ~ +5
Vrms/ 0 ~ +1 Vrms,
±0.3% of FSR
Other ±0.7% of FSR
Sampling Rate 10 Hz (Total)
-3dB Bandwidth 15.7 Hz
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB
Input Impedance >2 MΩ
Individual Channel Configuration Yes
Overvoltage Protection ±35 VDC
Introduction:
The M-7017RMS is an 8-channel differential AC input module
that is used to convert the AC input signals to their True RMS
DC values. The RMS input range can be from +150 mVrms to
+10 Vrms, and each channel can be configured individually.
The M-7017RMS is a complete, high-accuracy, RMS-to-DC
converter that computes the True RMS DC value of any
complex waveform. It also features 4 kV ESD protection,
2500 VDC intra-module isolation and +/-35 VDC overvoltage
protection.
Applications:
• Building Automation
• Factory Automation
• Machine Automation
• Remote Maintenance
• Remote Diagnosis
• Testing Equipment
System Specifications:
I/O Specifications:
M-7017RMS
8-channel True RMS Input Module
Features:
 8-channel True RMS Input
 ±0.15% Factory Calibrated Accuracy
 The RMS input range: +150 mVrms ~ +10 Vrms
 For Standard Operation with Frequencies: 45 Hz ~ 10 KHz
 Individual Channel Configurable

RemoteI/O
ModuleandUnit
DAQCard
Industrial
Communication
Wireless
Solution
Motion
Automation
Accessories
Energy
Management
Solution
● IntroductionDN-800 Series Voltage Attenuator and Current Transformer
DN-844-50A
DN-844-200A
DN-844-500A
DN-831I-100V-50A
DN-831I-100V-200A
DN-831I-100V-500A
DN-843VI-600V
DN-848VI-10V
DN-848VI-80V
DN-848VI-150V
DN-843I-CT-1
DN-843I-CT-10
DN-843I-CT-20
DN-843I-CT-50
Model Input Channel Input Type Input Range CT Type Cable Output
DN-831I-100V-50A
DN-831I-100V-200A
DN-831I-100V-500A
1 × Voltage,
1 × Current
AC/DC
±100 Vpp, ±50 A
Clip-on 1.5 m/3 m ±10 Vpp±100 Vpp, ±200 A
±100 Vpp, ±500 A
DN-843VI-600V 3 × Voltage AC/DC ±600 Vpp N/A N/A ±10 Vpp
DN-848VI-10V
DN-848VI-80V
DN-848VI-150V
8 × Voltage AC/DC
±10 Vpp,
N/A N/A ±10 Vpp±80 Vpp,
±150 Vpp
DN-843I-CT-1
DN-843I-CT-10
DN-843I-CT-20
DN-843I-CT-50
3 × Current AC/DC
±1 A,
Solid Core
(closed)
N/A
±1.6 Vpp,
±10 Vpp,
±10 Vpp,
±4 Vpp
±10 A,
±20 A,
±50 A
DN-844-50A
DN-844-200A
DN-844-500A
4 × Current AC/DC
±50 A,
Clip-on 1.5 m/3 m ±10 Vpp±200 A,
±500 A
The operating current of AC or DC motor
of the machines is converted into +/- 10
Vpp attenuated signal via DN-844, and
then the +/- 10 Vpp signal is converted
based on Modbus / RTU protocol for
seamless integration with all kinds of
PLC or SCADA.
Introduction:
DN-800 series is a Voltage Attenuator and Current Transformer designed for used in high-voltage applications. The current can be
converted into +/- 10 Vpp attenuated signal, so that a general electronic measuring device is able to read the signals. Compared to ICP
DAS power meter products (PM-3033, PM-3133, PM-4324, etc.), in addition to AC signals, the DN-800 series can convert DC signals as
well.
The users can use appropriate ICP DAS Remote I/O Modules such as: M-7017R, I-87017RW, or ET-7217 to measure the converted +/-
10 VDC signal via DN-800 series. And use M-7017RMS or I-87017W-RMS, etc. to measure the AC signals.
sBy using DN-800 series, the power data of all kinds of machines and AC/DC motors can be easily measured and retrieved, and then
the analyzed data can be used to develop a model to build a failure warning system.
Applications:
Appearance and Speciﬁcations:

7-21
7” Series4.3” Series
TPD-433-PM
VPD-143N-PM
TPD-703-PM
VPD-173-PM
Model No. Description
TPD-433-PM CR 4.3" Industrial Multi-meter TouchPAD, IP40 Waterproof (RoHS)
VPD-143N-PM CR 4.3" Industrial Multi-meter TouchPAD, IP65 Waterproof (RoHS)
TPD-703-PM CR 7" Industrial Multi-meter TouchPAD, IP40 Waterproof (RoHS)
VPD-173-PM CR 7" Industrial Multi-meter TouchPAD, IP65 Waterproof (RoHS)
Industrial Multi-power-meter Display
Features:
 Built-in HMI for Information Display of Power Meters
 4.3"/7" Colorful Display with Touch Panel
 IP40/IP60 Ingress Protection for Front Panel
 Built-in Real Time Clock
 Support Modbus TCP/RTU Protocols
 Support Max. of 8 Single-phase/3-phase Power Meters
(PM-3xxx series) or One PM-4324
 Support Max. of 4 Modbus/TCP Connections for
SCADA Software
 Support Phase Sequence Detection
 Support Fine Tune of Voltage and Current Ratio
Introduction:
The Industrial Multi-power-meter Display features 4.3"/7" high-resolution high-color TFT touch screen and IP40/IP65 warterproof. The
built-in HMI screen pages for the information display of power meter, via the communication mechanism, can automatically display
the meter information without additional programming. The multi-power-meter & multi-circuit device information can be shown in
one display device, customers can now provide the display solution to the local end. Furthermore, the data can be integrated into the
background SCADA control system, not only to get the power information, but also to facilitate the integration and conﬁguration.
Meter Conﬁguration Guide:

Fpc v2 ch7 energy management solution_20161213

More Related Content

What's hot (18)

Viewers also liked (7)

Similar to Fpc v2 ch7 energy management solution_20161213 (20)

Recently uploaded (20)

Fpc v2 ch7 energy management solution_20161213