SlideShare a Scribd company logo

Frame Relay

Download as PPT, PDF
Kishore Kumar, profile picture
Kishore Kumar

The document discusses the frame relay technology, a packet-switching protocol that enables medium to long-distance connections through virtual circuits (VCs) instead of dedicated leased lines. It outlines the advantages of frame relay, such as scalability and reduced costs, and introduces essential terminology like data link connection identifier (DLCI), committed information rate (CIR), and types of VCs. Additionally, it provides configuration commands and network diagrams for setting up frame relay switches and routers across multiple office locations in India.

EducationTechnologyBusiness
1 of 26
Downloaded 169 times
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
1
E0 192.168.1.150 E0 192.168.3.150 LAN - 192.168.1.0/24 LAN - 192.168.3.0/24 HYDERABAD OFFICE BANGLORE OFFICE E0 192.168.2.150 LAN - 192.168.2.0/24 CHENNAI OFFICE 2
Frame Relay • Frame Relay is a data link layer packet-switching protocol that uses digital circuits. • It is used for medium to longer distances and for longer connectivity. • Leased lines also provide longer connectivity but a physical circuit is used to make connection between 2 sites and the same circuit path is used always. • Frame Relay connections use logical circuits to make connections between 2 sites. These logical circuits are referred to as Virtual Circuits(VCs). • Multiple VCs can exist on the same physical connection. • VCs are Full duplex. 3
Advantages of Frame Relay • VCs overcome the scalability problems of leased lines by providing multiple logical circuits over the same physical connection. • Only one serial interface of a router is needed to handle the VC connections to multiple sites Whereas using leased lines multiple serial interfaces are needed to connect to multiple sites. • VCs provide full connectivity at a much lower price compared to leased lines. 4
Frame Relay Terminology • Sub-interfaces • Uses Shared bandwidth • Local Management interface(LMI): – used between the Frame relay DTE(eg.Router) and the Frame Relay DCE(eg. Frame Relay switch) – Defines how the DTE interacts with the DCE – Locally significant – Provides VCs status information(a keep-alive mechanism) – LMI standards : Cisco, ANSI, Q933a The DTE and DCE must have the same LMI signaling type 5
Frame Relay Terminology • Data Link Connection Identifier(DLCI) : – used to identify each VC on a physical interface (i.e.) Each VC has a unique local address called a DLCI number. – switch will map to the destination depending on the DLCI number – Inverse ARP is used to map DLCIs to next hop addresses. – Mapping can also be done manually. – Its Locally significant. – These numbers are given by the Frame relay service providers, Service providers assign DLCIs in the range of 16 to 1007. 6
Frame Relay Terminology • Virtual circuits are of two types: – Permanent Virtual Circuits – PVCs – Switched Virtual Circuits –SVCs • Permanent Virtual Circuit : – similar to a dedicated leased line , permanent connection. – used when constant data is being generated. • Switched Virtual Circuit : – also called as Semi-permanent virtual circuit – similar to a circuit switched connection where the VC is dynamically built and then torn down once the data has been sent. – used when data has to be sent in small amounts 7 and at periodic intervals.
Frame Relay Terminology • Committed Information Rate(CIR) : – Average data rate measured over a fixed period of time that the carrier guarantees for a VC. – committed bandwidth • Burst Rate(BR) : – Average data rate provider guarantees for a VC. – Excess bandwidth 8
Frame Relay Terminology • FECN and BECN : – Forward Explicit Congestion Notification – Backward Explicit Congestion Notification • When congestion occurs switch marks the FECN and BECN bits in the frame header. • FECN is sent to the destination • BECN is sent to the source • Thereby notifying both source and destination about the congestion. • FECN = 0 and BECN =0 implies no congestion. 9
Frame-Relay - Network Diagram FRAME-RELAY SWICH 10.0.0.1/8 S0 HYD 11.0.0.1/8 S0 S1 10.0.0.2/8 E0 192.168.1.150/24 DLCI NO : 100 LAN - 192.168.1.0/24 CHE S1 11.0.0.2/8 E0 192.168.2.150/24 BAN E0 192.168.3.150/2 DLCI NO : 200 LAN - 192.168.2.0/24 LAN - 192.168.3.0/24 10
Frame-Relay - Network Diagram FRAME-RELAY SWICH 10.0.0.1/8 S0 HYD CHE E0 192.168.1.150/24 DLCI NO : 100 LAN - 192.168.1.0/24 S1 10.0.0.2/8 E0 192.168.2.150/24 BAN E0 192.168.3.150/2 DLCI NO : 200 LAN - 192.168.2.0/24 LAN - 192.168.3.0/24 11
12
Microsoft Windows 2000 [Version 5.00.2195] (C) Copyright 1985-2000 Microsoft Corp. C:> telnet 192.168.1.150 Connecting ..... Configuring Serial interface Configuring Serial interface ================================ Router(config)#interface serial <no> Router(config)#interface serial <no> Welcome to Hyderabad Router Router(config-if)#ip address <address> <mask> Router(config-if)#ip ================================ address <address> <mask> Router(config-if)#no shutdown Router(config-if)#no shutdown User Access Verification Router(config-if)#encapsulation frame-relay Router(config-if)#encapsulation frame-relay password : **** Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay lmi-type <lmi type> Hyderabad> enable Router(config-if)#frame-relay interface-dlci <dlci no> password : **** Router(config-if)#frame-relay interface-dlci <dlci no> Hyderabad# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Hyderabad(config)# interface serial 0 Hyderabad(config-if)# ip address 10.0.0.1 255.0.0.0 Hyderabad(config-if)# no shut Hyderabad(config-if)# encapsulation frame-relay Hyderabad(config-if)# frame-relay lmi-type cisco Hyderabad(config-if)# frame-relay interface-dlci 100 Hyderabad(config-if)# exit Hyderabad(config)# 13
Microsoft Windows 2000 [Version 5.00.2195] (C) Copyright 1985-2000 Microsoft Corp. C:> telnet 192.168.3.150 Connecting ..... Configuring Serial interface Configuring Serial interface ================================ Router(config)#interface serial <no> Router(config)#interface serial <no> Welcome to Banglore Router Router(config-if)#ip address <address> <mask> Router(config-if)#ip ================================ address <address> <mask> Router(config-if)#no shutdown Router(config-if)#no shutdown User Access Verification Router(config-if)#encapsulation frame-relay Router(config-if)#encapsulation frame-relay password : **** Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay lmi-type <lmi type> Banglore> enable Router(config-if)#frame-relay interface-dlci <dlci no> password : **** Router(config-if)#frame-relay interface-dlci <dlci no> Banglore# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Banglore(config)# interface serial 1 Banglore(config-if)# ip address 10.0.0.2 255.0.0.0 Banglore(config-if)# no shut Banglore(config-if)# encapsulation frame-relay Banglore(config-if)# frame-relay lmi-type cisco Banglore(config-if)# frame-relay interface-dlci 200 Banglore(config-if)# exit Banglore(config)# 14
Configuring Frame-relay Switch Microsoft Windows 2000 [Version 5.00.2195] Switch Configuring Frame-relay (C) Copyright 1985-2000 Microsoftserial <no> Router(config)#interface serial <no> Router(config)#interface Corp. C:> telnet 192.168.2.150 Router(config-if)#no ip address Router(config-if)#no ip address Connecting ..... Router(config-if)#no shutdown Router(config-if)#no shutdown ================================ Router(config-if)#clockrate <clock rate> Router(config-if)#clockrate <clock rate> Welcome to Chennai Router Router(config-if)#encapsulation frame-relay ================================ Router(config-if)#encapsulation frame-relay Router(config-if)#frame-relay lmi-type <lmi type> User Access Verification Router(config-if)#frame-relay lmi-type <lmi type> password Router(config-if)#frame-relay intf-type dce Switch : **** Converting Router to intf-type dce Router(config-if)#frame-relay Frame-relay Switch Converting Router to Frame-relay Chennai> enable Router(config-if)#frame-relay switching Router(config)#frame-relay switching Router(config-if)#frame-relayroute <Source dlci no> Router(config)#frame-relay route <Source dlci no> password : **** interface <int type> <int. no> interface <int type> <int. no> Chennai# configure terminal <Destination dlci no> <Destination dlci Enter configuration commands, one per line.no> with CNTL/Z. End Chennai(config)# frame-relay switching Chennai(config)# interface serial 1 Chennai(config-if)# no ip address Chennai(config-if)# no shut Chennai(config-if)# encapsulation frame-relay Chennai(config-if)# clockrate 64000 Chennai(config-if)# frame-relay lmi-type cisco Chennai(config-if)# frame-relay intf-type dce Chennai(config-if)# frame-relay route 100 interface serial 0 200 15
Chennai(config)# interface serial 0 Chennai(config-if)# no ip address Chennai(config-if)# no shut Chennai(config-if)# encapsulation Frame-relaySwitch Configuring Frame-relay Switch Configuring frame-relay Chennai(config-if)# clockrate 64000 Router(config)#interface serial <no> Router(config)#interface serial <no> Chennai(config-if)# frame-relay address cisco lmi-type Router(config-if)#no ip address Router(config-if)#no ip intf-type dce Chennai(config-if)# frame-relay Router(config-if)#no shutdown Router(config-if)#no shutdown Chennai(config-if)# frame-relay route 200 interface serial 1 100 Router(config-if)#clockrate <clock rate> Router(config-if)#clockrate <clock rate> Chennai(config-if)# Router(config-if)#encapsulation frame-relay Router(config-if)#encapsulation frame-relay Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay intf-type dce Router(config-if)#frame-relay intf-type dce Router(config-if)#frame-relay route <Source dlci no> Router(config-if)#frame-relay route <Source dlci no> interface <int type> <int. no> interface <int type> <int. no> <Destination dlci no> <Destination dlci no> 16
Hyderabad# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0 input pkts 0 output pkts 2 in bytes 0 out bytes 60 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 60 pvc create time 00:12:03, last time pvc status changed 00:00:20 Hyderabad# PVC STATUS = ACTIVE PVC STATUS = ACTIVE Implies, all configurations and the connectivity are Implies, all configurations and the connectivity are fine. fine. 17
Hyderabad# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 100, DLCI USAGE = LOCAL,PVC STATUS = INACTIVE,INTERFACE = Serial0 input pkts 0 output pkts 2 in bytes 0 out bytes 60 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 60 pvc create time 00:12:03, last time pvc status changed 00:00:20 Hyderabad# PVC STATUS = INACTIVE PVC STATUS = INACTIVE Implies, Configuration or Connectivity Problem with Implies, Configuration or Connectivity Problem with Remote LMI Remote LMI 18
Hyderabad# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 100, DLCI USAGE = LOCAL,PVC STATUS = DELETED,INTERFACE = Serial0 input pkts 0 output pkts 2 in bytes 0 out bytes 60 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 60 pvc create time 00:12:03, last time pvc status changed 00:00:20 Hyderabad# PVC STATUS = DELETED PVC STATUS = DELETED Implies, Configuration or Connectivity Problem with Implies, Configuration or Connectivity Problem with Local LMI Local LMI 19
Banglore# show frame-relay pvc PVC Statistics for interface Serial1 (Frame Relay DTE) DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1 input pkts 8 output pkts 7 in bytes 570 out bytes 586 dropped pkts 2 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 7 out bcast bytes 586 pvc create time 00:12:26, last time pvc status changed 00:02:06 Banglore# 20
Chennai# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DCE) DLCI = 200, DLCI USAGE = SWITCHED,PVC STATUS = ACTIVE,INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 pvc create time 00:02:07, last time pvc status changed 00:00:56 Num Pkts Switched 0 PVC Statistics for interface Serial1 (Frame Relay DCE) DLCI = 100, DLCI USAGE = SWITCHED,PVC STATUS = ACTIVE,INTERFACE = Serial1 input pkts 4 output pkts 3 in bytes 186 out bytes 202 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 pvc create time 00:02:21, last time pvc status changed 00:01:04 Num Pkts Switched 4 Chennai# 21
Hyderabad# show frame-relay map Serial0 (up): ip 10.0.0.2, dlci 100(0x64,0x1840), dynamic, broadcast, status defined, active Hyderabad# 22
Banglore# show frame-relay map Serial1 (up): ip 10.0.0.1, dlci 200(0xC8,0x3080), dynamic, broadcast, status defined, active Banglore# 23
Chennai# show Input Intf Serial0 Serial1 Chennai# frame-relay Input Dlci 200 100 route Output Intf Serial1 Serial0 Output Dlci 100 200 24 Status active active
Hyderabad(config)# no ip routing Hyderabad(config)# ip routing Hyderabad(config)# router rip Hyderabad(config-router)# network 192.168.1.0 Hyderabad(config-router)# network 10.0.0.0 Hyderabad(config-router)# ^Z Configuring RIP Hyderabad# show ip route Configuring RIP Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP Router(config)# router rip Router(config)# router rip D - EIGRP, EX - EIGRP external, O - OSPF, <Network ID> area Router(config-router)# network IA - OSPF inter Router(config-router)# network <Network ID> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i- IS-IS, L1-IS-IS level-1, L2-IS-IS level-2,*- candidate default U - per-user static route, o - ODR Gateway of last resort is not set C 10.0.0.0/8 is directly connected, Serial0 C 192.168.1.0/24 is directly connected, Ethernet0 R 192.168.3.0/24 [120/1] via 10.0.0.2, 00:00:25, Serial0 Hyderabad# ping 192.168.3.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.3.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 40/43/44 ms Hyderabad# 25
Banglore(config)# no ip routing Banglore(config)# ip routing Banglore(config)# router rip Banglore(config-router)# network 192.168.3.0 Banglore(config-router)# network 10.0.0.0 Banglore(config-router)# ^Z Configuring RIP Banglore# show ip route Configuring RIP Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP Router(config)# router rip Router(config)# router rip D - EIGRP, EX - EIGRP external, O - OSPF, <Network ID> area Router(config-router)# network IA - OSPF inter Router(config-router)# network <Network ID> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i- IS-IS, L1-IS-IS level-1, L2-IS-IS level-2,*- candidate default U - per-user static route, o - ODR Gateway of last resort is not set C 10.0.0.0/8 is directly connected, Serial1 R 192.168.1.0/24 [120/1] via 10.0.0.1, 00:00:04, Serial1 C 192.168.3.0/24 is directly connected, Ethernet0 Banglore# ping 192.168.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 40/43/44 ms Banglore# 26

More Related Content

PDF
Switching Types
Kishore Kumar
 
PDF
Route Authentication
Kishore Kumar
 
PPTX
Spanning tree protocol
hazimalghalayini
 
PPTX
Ppt of routing protocols
Bhagyashri Dhoke
 
PPTX
Switching
CYBERINTELLIGENTS
 
PPTX
Dynamic Routing Protocol OSPF
Atakan ATAK
 
DOCX
Layer 2 & layer 3 switching
Muhd Mu'izuddin
 
PPT
Rip ospf and bgp
Abhishek Kesharwani
 
Switching Types
Kishore Kumar
 
Route Authentication
Kishore Kumar
 
Spanning tree protocol
hazimalghalayini
 
Ppt of routing protocols
Bhagyashri Dhoke
 
Switching
CYBERINTELLIGENTS
 
Dynamic Routing Protocol OSPF
Atakan ATAK
 
Layer 2 & layer 3 switching
Muhd Mu'izuddin
 
Rip ospf and bgp
Abhishek Kesharwani
 

What's hot (19)

PDF
Day 4 LAYER 2 SWITCHING
anilinvns
 
PPTX
VPC PPT @NETWORKERSHOME
networkershome
 
PPTX
Otv notes
Krunal Shah
 
PPT
Switching 1
Kishore Kumar
 
PDF
Open Shortest Path First
Atakan ATAK
 
PPTX
Vpc notes
Krunal Shah
 
PDF
Overview of Spanning Tree Protocol
Arash Foroughi
 
PPT
CCNA- part 10 wan link-isdn
Sandeep Sharma IIMK Smart City,IoT,Bigdata,Cloud,BI,DW
 
PPT
Layer 2 switching fundamentals(networking)
welcometofacebook
 
PPTX
Layer3protocols
assinha
 
PPT
Dynamic Routing
tmavroidis
 
PDF
Switching
Netwax Lab
 
PPT
Chapter 06 - Routing
phanleson
 
DOC
Ccna 2 chapter 10 v4.0 answers 2011
Dân Chơi
 
PDF
vPC_Final
Pratik Bhide
 
PDF
Inter VLAN Routing
Netwax Lab
 
DOCX
Packet Tracer: WAN, point to point links.
Rafat Khandaker
 
PDF
Spaning Tree Protocol
Atakan ATAK
 
PPTX
Routers.ppt
kirbadh
 
Day 4 LAYER 2 SWITCHING
anilinvns
 
VPC PPT @NETWORKERSHOME
networkershome
 
Otv notes
Krunal Shah
 
Switching 1
Kishore Kumar
 
Open Shortest Path First
Atakan ATAK
 
Vpc notes
Krunal Shah
 
Overview of Spanning Tree Protocol
Arash Foroughi
 
CCNA- part 10 wan link-isdn
Sandeep Sharma IIMK Smart City,IoT,Bigdata,Cloud,BI,DW
 
Layer 2 switching fundamentals(networking)
welcometofacebook
 
Layer3protocols
assinha
 
Dynamic Routing
tmavroidis
 
Switching
Netwax Lab
 
Chapter 06 - Routing
phanleson
 
Ccna 2 chapter 10 v4.0 answers 2011
Dân Chơi
 
vPC_Final
Pratik Bhide
 
Inter VLAN Routing
Netwax Lab
 
Packet Tracer: WAN, point to point links.
Rafat Khandaker
 
Spaning Tree Protocol
Atakan ATAK
 
Routers.ppt
kirbadh
 
Ad

Viewers also liked (9)

PPT
Chapter10 switching
Suneel Varma
 
PDF
fundamentals of linux
aniruddh Tyagi
 
PDF
Linux by zoom tech
Satya Johnny
 
PDF
Linux system admin
Mohammed Zainul Abiddin
 
PDF
Linux course details
cisco training
 
PDF
Linux practicals T.Y.B.ScIT
vignesh0009
 
PDF
Linux lab manual by zoom
Satya Johnny
 
PDF
Mcse 2012
Mohammed Zainul Abiddin
 
PDF
Linux Practical Manual
jorge
 
Chapter10 switching
Suneel Varma
 
fundamentals of linux
aniruddh Tyagi
 
Linux by zoom tech
Satya Johnny
 
Linux system admin
Mohammed Zainul Abiddin
 
Linux course details
cisco training
 
Linux practicals T.Y.B.ScIT
vignesh0009
 
Linux lab manual by zoom
Satya Johnny
 
Mcse 2012
Mohammed Zainul Abiddin
 
Linux Practical Manual
jorge
 
Ad

Similar to Frame Relay (20)

PPT
CCNA- part 11 frame relay
Sandeep Sharma IIMK Smart City,IoT,Bigdata,Cloud,BI,DW
 
PPT
Chapter14ccna
Lakshan Perera
 
DOC
Ccna 4 chapter 3 v4.0 answers 2011
Dân Chơi
 
PPT
Swvlan
Gaurav Juneja
 
PDF
WAN (wide area network)
Netwax Lab
 
PDF
Ccna 4 Final 4 Version 4.0 Answers
CCNA4Answers
 
PPT
Chapter14ccna
robertoxe
 
PPT
Chapter14ccna
ernestlithur
 
DOCX
Practice exam #2
Kris Mofu
 
PPT
Day 20.3 frame relay
CYBERINTELLIGENTS
 
PPT
Wan Interface Configuration
Kishore Kumar
 
PPTX
Basic concept of frame relay
NetProtocol Xpert
 
PDF
Service Provider Networks and Frame Relay
Tharindu Sankalpa
 
PPT
Icnd210 s08l03
computerlenguyen
 
PPT
Day 20.1 configuringframerelay
CYBERINTELLIGENTS
 
PPTX
02_N2_Chapter 2.pptx
MohammadMahdiSoroush
 
DOCX
Ccna 4 final exam answer v5
friv4schoolgames
 
PPTX
EMEA Airheads- Manage Devices at Branch Office (BOC)
Aruba, a Hewlett Packard Enterprise company
 
PPTX
Network Design on cisco packet tracer 6.0
Saurav Pandey
 
PDF
Wan Technologies
AKLI
 
CCNA- part 11 frame relay
Sandeep Sharma IIMK Smart City,IoT,Bigdata,Cloud,BI,DW
 
Chapter14ccna
Lakshan Perera
 
Ccna 4 chapter 3 v4.0 answers 2011
Dân Chơi
 
Swvlan
Gaurav Juneja
 
WAN (wide area network)
Netwax Lab
 
Ccna 4 Final 4 Version 4.0 Answers
CCNA4Answers
 
Chapter14ccna
robertoxe
 
Chapter14ccna
ernestlithur
 
Practice exam #2
Kris Mofu
 
Day 20.3 frame relay
CYBERINTELLIGENTS
 
Wan Interface Configuration
Kishore Kumar
 
Basic concept of frame relay
NetProtocol Xpert
 
Service Provider Networks and Frame Relay
Tharindu Sankalpa
 
Icnd210 s08l03
computerlenguyen
 
Day 20.1 configuringframerelay
CYBERINTELLIGENTS
 
02_N2_Chapter 2.pptx
MohammadMahdiSoroush
 
Ccna 4 final exam answer v5
friv4schoolgames
 
EMEA Airheads- Manage Devices at Branch Office (BOC)
Aruba, a Hewlett Packard Enterprise company
 
Network Design on cisco packet tracer 6.0
Saurav Pandey
 
Wan Technologies
AKLI
 

More from Kishore Kumar (20)

PDF
Switching Types
Kishore Kumar
 
PDF
Recognizing security threats
Kishore Kumar
 
PDF
Ccna simulation exam practice guide
Kishore Kumar
 
PPT
RIP Update Timers
Kishore Kumar
 
PPT
Password Recovery
Kishore Kumar
 
PPT
OSPF 3
Kishore Kumar
 
PPT
OSPF 2
Kishore Kumar
 
PPT
Ip addressing
Kishore Kumar
 
PPT
Internal & External of Routers
Kishore Kumar
 
PPT
Integrated Service Digital Network
Kishore Kumar
 
PPT
Initial Configuration of Router
Kishore Kumar
 
PPT
Frame Relay
Kishore Kumar
 
PPT
Dynamic Routing RIP
Kishore Kumar
 
PPT
Multi Static Routng & Default Routing
Kishore Kumar
 
PPT
OSI Layers
Kishore Kumar
 
PPT
Password Recovery
Kishore Kumar
 
PPT
OSPF 3
Kishore Kumar
 
PPT
OSPF 2
Kishore Kumar
 
PPT
IP Addressing
Kishore Kumar
 
PPT
Internal & External of Routers
Kishore Kumar
 
Switching Types
Kishore Kumar
 
Recognizing security threats
Kishore Kumar
 
Ccna simulation exam practice guide
Kishore Kumar
 
RIP Update Timers
Kishore Kumar
 
Password Recovery
Kishore Kumar
 
OSPF 3
Kishore Kumar
 
OSPF 2
Kishore Kumar
 
Ip addressing
Kishore Kumar
 
Internal & External of Routers
Kishore Kumar
 
Integrated Service Digital Network
Kishore Kumar
 
Initial Configuration of Router
Kishore Kumar
 
Frame Relay
Kishore Kumar
 
Dynamic Routing RIP
Kishore Kumar
 
Multi Static Routng & Default Routing
Kishore Kumar
 
OSI Layers
Kishore Kumar
 
Password Recovery
Kishore Kumar
 
OSPF 3
Kishore Kumar
 
OSPF 2
Kishore Kumar
 
IP Addressing
Kishore Kumar
 
Internal & External of Routers
Kishore Kumar
 

Recently uploaded (20)

PDF
Insiders guide to clinical Medicine.pdf
AbhishekPatil315128
 
PDF
Physiotherapy_for_Respiratory_and_Cardiac_Problems WEBBER.pdf
DrMONISHAphysio
 
PPTX
IMMUNITY IMMUNITY refers to protection against infection, and the immune syst...
shilpa939953
 
PDF
VCE English Exam - Section C Student Revision Booklet
jpinnuck
 
PDF
RMMM.pdf make it easy to upload and study
sajedul2
 
PPTX
Introduction to Child Health Nursing – Unit I | Child Health Nursing I | B.Sc...
RAKESH SAJJAN
 
PDF
Pre independence Education in Inndia.pdf
goofy5603
 
PDF
102 student loan defaulters named and shamed – Is someone you know on the list?
Kweku Zurek
 
PPTX
Introduction_to_Human_Anatomy_and_Physiology_for_B.Pharm.pptx
chetansingh379583
 
PPTX
Final Presentation General Medicine 03-08-2024.pptx
ZaheerAhmad228692
 
PPTX
master seminar digital applications in india
ananyaray35
 
PDF
Classroom Observation Tools for Teachers
Nicaramirez
 
PDF
Complications of Minimal Access Surgery at WLH
mohitsuren827
 
PPTX
PPH.pptx obstetrics and gynecology in nursing
SrideviDevaraj5
 
PDF
Supply Chain Operations Speaking Notes -ICLT Program
labyankof
 
PPTX
BOWEL ELIMINATION FACTORS AFFECTING AND TYPES
PreetiSawant10
 
PDF
Anesthesia in Laparoscopic Surgery in India
mohitsuren827
 
PDF
Mark Klimek Lecture Notes_240423 revision books _173037.pdf
pascalgumisiriza1
 
PDF
Module 4: Burden of Disease Tutorial Slides S2 2025
Jonathan Hallett
 
PDF
Saundersa Comprehensive Review for the NCLEX-RN Examination.pdf
sreejithcareers
 
Insiders guide to clinical Medicine.pdf
AbhishekPatil315128
 
Physiotherapy_for_Respiratory_and_Cardiac_Problems WEBBER.pdf
DrMONISHAphysio
 
IMMUNITY IMMUNITY refers to protection against infection, and the immune syst...
shilpa939953
 
VCE English Exam - Section C Student Revision Booklet
jpinnuck
 
RMMM.pdf make it easy to upload and study
sajedul2
 
Introduction to Child Health Nursing – Unit I | Child Health Nursing I | B.Sc...
RAKESH SAJJAN
 
Pre independence Education in Inndia.pdf
goofy5603
 
102 student loan defaulters named and shamed – Is someone you know on the list?
Kweku Zurek
 
Introduction_to_Human_Anatomy_and_Physiology_for_B.Pharm.pptx
chetansingh379583
 
Final Presentation General Medicine 03-08-2024.pptx
ZaheerAhmad228692
 
master seminar digital applications in india
ananyaray35
 
Classroom Observation Tools for Teachers
Nicaramirez
 
Complications of Minimal Access Surgery at WLH
mohitsuren827
 
PPH.pptx obstetrics and gynecology in nursing
SrideviDevaraj5
 
Supply Chain Operations Speaking Notes -ICLT Program
labyankof
 
BOWEL ELIMINATION FACTORS AFFECTING AND TYPES
PreetiSawant10
 
Anesthesia in Laparoscopic Surgery in India
mohitsuren827
 
Mark Klimek Lecture Notes_240423 revision books _173037.pdf
pascalgumisiriza1
 
Module 4: Burden of Disease Tutorial Slides S2 2025
Jonathan Hallett
 
Saundersa Comprehensive Review for the NCLEX-RN Examination.pdf
sreejithcareers
 

Frame Relay

  • 1. 1
  • 2. E0 192.168.1.150 E0 192.168.3.150 LAN - 192.168.1.0/24 LAN - 192.168.3.0/24 HYDERABAD OFFICE BANGLORE OFFICE E0 192.168.2.150 LAN - 192.168.2.0/24 CHENNAI OFFICE 2
  • 3. Frame Relay • Frame Relay is a data link layer packet-switching protocol that uses digital circuits. • It is used for medium to longer distances and for longer connectivity. • Leased lines also provide longer connectivity but a physical circuit is used to make connection between 2 sites and the same circuit path is used always. • Frame Relay connections use logical circuits to make connections between 2 sites. These logical circuits are referred to as Virtual Circuits(VCs). • Multiple VCs can exist on the same physical connection. • VCs are Full duplex. 3
  • 4. Advantages of Frame Relay • VCs overcome the scalability problems of leased lines by providing multiple logical circuits over the same physical connection. • Only one serial interface of a router is needed to handle the VC connections to multiple sites Whereas using leased lines multiple serial interfaces are needed to connect to multiple sites. • VCs provide full connectivity at a much lower price compared to leased lines. 4
  • 5. Frame Relay Terminology • Sub-interfaces • Uses Shared bandwidth • Local Management interface(LMI): – used between the Frame relay DTE(eg.Router) and the Frame Relay DCE(eg. Frame Relay switch) – Defines how the DTE interacts with the DCE – Locally significant – Provides VCs status information(a keep-alive mechanism) – LMI standards : Cisco, ANSI, Q933a The DTE and DCE must have the same LMI signaling type 5
  • 6. Frame Relay Terminology • Data Link Connection Identifier(DLCI) : – used to identify each VC on a physical interface (i.e.) Each VC has a unique local address called a DLCI number. – switch will map to the destination depending on the DLCI number – Inverse ARP is used to map DLCIs to next hop addresses. – Mapping can also be done manually. – Its Locally significant. – These numbers are given by the Frame relay service providers, Service providers assign DLCIs in the range of 16 to 1007. 6
  • 7. Frame Relay Terminology • Virtual circuits are of two types: – Permanent Virtual Circuits – PVCs – Switched Virtual Circuits –SVCs • Permanent Virtual Circuit : – similar to a dedicated leased line , permanent connection. – used when constant data is being generated. • Switched Virtual Circuit : – also called as Semi-permanent virtual circuit – similar to a circuit switched connection where the VC is dynamically built and then torn down once the data has been sent. – used when data has to be sent in small amounts 7 and at periodic intervals.
  • 8. Frame Relay Terminology • Committed Information Rate(CIR) : – Average data rate measured over a fixed period of time that the carrier guarantees for a VC. – committed bandwidth • Burst Rate(BR) : – Average data rate provider guarantees for a VC. – Excess bandwidth 8
  • 9. Frame Relay Terminology • FECN and BECN : – Forward Explicit Congestion Notification – Backward Explicit Congestion Notification • When congestion occurs switch marks the FECN and BECN bits in the frame header. • FECN is sent to the destination • BECN is sent to the source • Thereby notifying both source and destination about the congestion. • FECN = 0 and BECN =0 implies no congestion. 9
  • 10. Frame-Relay - Network Diagram FRAME-RELAY SWICH 10.0.0.1/8 S0 HYD 11.0.0.1/8 S0 S1 10.0.0.2/8 E0 192.168.1.150/24 DLCI NO : 100 LAN - 192.168.1.0/24 CHE S1 11.0.0.2/8 E0 192.168.2.150/24 BAN E0 192.168.3.150/2 DLCI NO : 200 LAN - 192.168.2.0/24 LAN - 192.168.3.0/24 10
  • 11. Frame-Relay - Network Diagram FRAME-RELAY SWICH 10.0.0.1/8 S0 HYD CHE E0 192.168.1.150/24 DLCI NO : 100 LAN - 192.168.1.0/24 S1 10.0.0.2/8 E0 192.168.2.150/24 BAN E0 192.168.3.150/2 DLCI NO : 200 LAN - 192.168.2.0/24 LAN - 192.168.3.0/24 11
  • 12. 12
  • 13. Microsoft Windows 2000 [Version 5.00.2195] (C) Copyright 1985-2000 Microsoft Corp. C:> telnet 192.168.1.150 Connecting ..... Configuring Serial interface Configuring Serial interface ================================ Router(config)#interface serial <no> Router(config)#interface serial <no> Welcome to Hyderabad Router Router(config-if)#ip address <address> <mask> Router(config-if)#ip ================================ address <address> <mask> Router(config-if)#no shutdown Router(config-if)#no shutdown User Access Verification Router(config-if)#encapsulation frame-relay Router(config-if)#encapsulation frame-relay password : **** Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay lmi-type <lmi type> Hyderabad> enable Router(config-if)#frame-relay interface-dlci <dlci no> password : **** Router(config-if)#frame-relay interface-dlci <dlci no> Hyderabad# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Hyderabad(config)# interface serial 0 Hyderabad(config-if)# ip address 10.0.0.1 255.0.0.0 Hyderabad(config-if)# no shut Hyderabad(config-if)# encapsulation frame-relay Hyderabad(config-if)# frame-relay lmi-type cisco Hyderabad(config-if)# frame-relay interface-dlci 100 Hyderabad(config-if)# exit Hyderabad(config)# 13
  • 14. Microsoft Windows 2000 [Version 5.00.2195] (C) Copyright 1985-2000 Microsoft Corp. C:> telnet 192.168.3.150 Connecting ..... Configuring Serial interface Configuring Serial interface ================================ Router(config)#interface serial <no> Router(config)#interface serial <no> Welcome to Banglore Router Router(config-if)#ip address <address> <mask> Router(config-if)#ip ================================ address <address> <mask> Router(config-if)#no shutdown Router(config-if)#no shutdown User Access Verification Router(config-if)#encapsulation frame-relay Router(config-if)#encapsulation frame-relay password : **** Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay lmi-type <lmi type> Banglore> enable Router(config-if)#frame-relay interface-dlci <dlci no> password : **** Router(config-if)#frame-relay interface-dlci <dlci no> Banglore# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Banglore(config)# interface serial 1 Banglore(config-if)# ip address 10.0.0.2 255.0.0.0 Banglore(config-if)# no shut Banglore(config-if)# encapsulation frame-relay Banglore(config-if)# frame-relay lmi-type cisco Banglore(config-if)# frame-relay interface-dlci 200 Banglore(config-if)# exit Banglore(config)# 14
  • 15. Configuring Frame-relay Switch Microsoft Windows 2000 [Version 5.00.2195] Switch Configuring Frame-relay (C) Copyright 1985-2000 Microsoftserial <no> Router(config)#interface serial <no> Router(config)#interface Corp. C:> telnet 192.168.2.150 Router(config-if)#no ip address Router(config-if)#no ip address Connecting ..... Router(config-if)#no shutdown Router(config-if)#no shutdown ================================ Router(config-if)#clockrate <clock rate> Router(config-if)#clockrate <clock rate> Welcome to Chennai Router Router(config-if)#encapsulation frame-relay ================================ Router(config-if)#encapsulation frame-relay Router(config-if)#frame-relay lmi-type <lmi type> User Access Verification Router(config-if)#frame-relay lmi-type <lmi type> password Router(config-if)#frame-relay intf-type dce Switch : **** Converting Router to intf-type dce Router(config-if)#frame-relay Frame-relay Switch Converting Router to Frame-relay Chennai> enable Router(config-if)#frame-relay switching Router(config)#frame-relay switching Router(config-if)#frame-relayroute <Source dlci no> Router(config)#frame-relay route <Source dlci no> password : **** interface <int type> <int. no> interface <int type> <int. no> Chennai# configure terminal <Destination dlci no> <Destination dlci Enter configuration commands, one per line.no> with CNTL/Z. End Chennai(config)# frame-relay switching Chennai(config)# interface serial 1 Chennai(config-if)# no ip address Chennai(config-if)# no shut Chennai(config-if)# encapsulation frame-relay Chennai(config-if)# clockrate 64000 Chennai(config-if)# frame-relay lmi-type cisco Chennai(config-if)# frame-relay intf-type dce Chennai(config-if)# frame-relay route 100 interface serial 0 200 15
  • 16. Chennai(config)# interface serial 0 Chennai(config-if)# no ip address Chennai(config-if)# no shut Chennai(config-if)# encapsulation Frame-relaySwitch Configuring Frame-relay Switch Configuring frame-relay Chennai(config-if)# clockrate 64000 Router(config)#interface serial <no> Router(config)#interface serial <no> Chennai(config-if)# frame-relay address cisco lmi-type Router(config-if)#no ip address Router(config-if)#no ip intf-type dce Chennai(config-if)# frame-relay Router(config-if)#no shutdown Router(config-if)#no shutdown Chennai(config-if)# frame-relay route 200 interface serial 1 100 Router(config-if)#clockrate <clock rate> Router(config-if)#clockrate <clock rate> Chennai(config-if)# Router(config-if)#encapsulation frame-relay Router(config-if)#encapsulation frame-relay Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay lmi-type <lmi type> Router(config-if)#frame-relay intf-type dce Router(config-if)#frame-relay intf-type dce Router(config-if)#frame-relay route <Source dlci no> Router(config-if)#frame-relay route <Source dlci no> interface <int type> <int. no> interface <int type> <int. no> <Destination dlci no> <Destination dlci no> 16
  • 17. Hyderabad# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0 input pkts 0 output pkts 2 in bytes 0 out bytes 60 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 60 pvc create time 00:12:03, last time pvc status changed 00:00:20 Hyderabad# PVC STATUS = ACTIVE PVC STATUS = ACTIVE Implies, all configurations and the connectivity are Implies, all configurations and the connectivity are fine. fine. 17
  • 18. Hyderabad# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 100, DLCI USAGE = LOCAL,PVC STATUS = INACTIVE,INTERFACE = Serial0 input pkts 0 output pkts 2 in bytes 0 out bytes 60 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 60 pvc create time 00:12:03, last time pvc status changed 00:00:20 Hyderabad# PVC STATUS = INACTIVE PVC STATUS = INACTIVE Implies, Configuration or Connectivity Problem with Implies, Configuration or Connectivity Problem with Remote LMI Remote LMI 18
  • 19. Hyderabad# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 100, DLCI USAGE = LOCAL,PVC STATUS = DELETED,INTERFACE = Serial0 input pkts 0 output pkts 2 in bytes 0 out bytes 60 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 60 pvc create time 00:12:03, last time pvc status changed 00:00:20 Hyderabad# PVC STATUS = DELETED PVC STATUS = DELETED Implies, Configuration or Connectivity Problem with Implies, Configuration or Connectivity Problem with Local LMI Local LMI 19
  • 20. Banglore# show frame-relay pvc PVC Statistics for interface Serial1 (Frame Relay DTE) DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1 input pkts 8 output pkts 7 in bytes 570 out bytes 586 dropped pkts 2 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 7 out bcast bytes 586 pvc create time 00:12:26, last time pvc status changed 00:02:06 Banglore# 20
  • 21. Chennai# show frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DCE) DLCI = 200, DLCI USAGE = SWITCHED,PVC STATUS = ACTIVE,INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 pvc create time 00:02:07, last time pvc status changed 00:00:56 Num Pkts Switched 0 PVC Statistics for interface Serial1 (Frame Relay DCE) DLCI = 100, DLCI USAGE = SWITCHED,PVC STATUS = ACTIVE,INTERFACE = Serial1 input pkts 4 output pkts 3 in bytes 186 out bytes 202 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 pvc create time 00:02:21, last time pvc status changed 00:01:04 Num Pkts Switched 4 Chennai# 21
  • 22. Hyderabad# show frame-relay map Serial0 (up): ip 10.0.0.2, dlci 100(0x64,0x1840), dynamic, broadcast, status defined, active Hyderabad# 22
  • 23. Banglore# show frame-relay map Serial1 (up): ip 10.0.0.1, dlci 200(0xC8,0x3080), dynamic, broadcast, status defined, active Banglore# 23
  • 24. Chennai# show Input Intf Serial0 Serial1 Chennai# frame-relay Input Dlci 200 100 route Output Intf Serial1 Serial0 Output Dlci 100 200 24 Status active active
  • 25. Hyderabad(config)# no ip routing Hyderabad(config)# ip routing Hyderabad(config)# router rip Hyderabad(config-router)# network 192.168.1.0 Hyderabad(config-router)# network 10.0.0.0 Hyderabad(config-router)# ^Z Configuring RIP Hyderabad# show ip route Configuring RIP Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP Router(config)# router rip Router(config)# router rip D - EIGRP, EX - EIGRP external, O - OSPF, <Network ID> area Router(config-router)# network IA - OSPF inter Router(config-router)# network <Network ID> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i- IS-IS, L1-IS-IS level-1, L2-IS-IS level-2,*- candidate default U - per-user static route, o - ODR Gateway of last resort is not set C 10.0.0.0/8 is directly connected, Serial0 C 192.168.1.0/24 is directly connected, Ethernet0 R 192.168.3.0/24 [120/1] via 10.0.0.2, 00:00:25, Serial0 Hyderabad# ping 192.168.3.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.3.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 40/43/44 ms Hyderabad# 25
  • 26. Banglore(config)# no ip routing Banglore(config)# ip routing Banglore(config)# router rip Banglore(config-router)# network 192.168.3.0 Banglore(config-router)# network 10.0.0.0 Banglore(config-router)# ^Z Configuring RIP Banglore# show ip route Configuring RIP Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP Router(config)# router rip Router(config)# router rip D - EIGRP, EX - EIGRP external, O - OSPF, <Network ID> area Router(config-router)# network IA - OSPF inter Router(config-router)# network <Network ID> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i- IS-IS, L1-IS-IS level-1, L2-IS-IS level-2,*- candidate default U - per-user static route, o - ODR Gateway of last resort is not set C 10.0.0.0/8 is directly connected, Serial1 R 192.168.1.0/24 [120/1] via 10.0.0.1, 00:00:04, Serial1 C 192.168.3.0/24 is directly connected, Ethernet0 Banglore# ping 192.168.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 40/43/44 ms Banglore# 26