Genie Z80_60
0 likes612 views
This document provides specifications for a Genie Z-80/60 self-propelled articulating boom lift. It lists measurements such as a maximum working height of 84 feet and horizontal reach of 60 feet. It describes options for different platform sizes, engines, tires and other features. Safety features are also mentioned such as tilt alarm, descent alarm and auto engine fault shutdown.
Genie Z80_60
- 1. Specifi cations F www.genielift.com Self-Propelled Articulating Booms Range Of Motion Z-80/60 90 ft 27.43 m 80 ft 24.38 m 70 ft 21.34 m 60 ft 18.29 m 50 ft 15.24 m 40 ft 12.19 m 30 ft 9.14 m 20 ft 6.1 m 10 ft 3.05 m 0 ft 0 m -10 ft -3.05 m -20 ft -6.1 m -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m Z™-80/60 Model Z-80/60 * The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only. *** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings. **** Weight will vary depending on options and/or country standards. Measurements US Metric Working height maximum* 84 ft 25.77 m Platform height maximum 78 ft 23.77 m Horizontal reach maximum 60 ft 18.29 m Up and over clearance maximum 29 ft 8.83 m Below ground reach 15 ft 10 in 4.83 m Platform length - 8 ft / 6 ft 3ft/2ft 6in 0.91m/0.76m Platform width - 8 ft / 6 ft 8ft/6ft 2.44m/1.83m Height - stowed 9 ft 10 in 3.00 m Length - stowed 37 ft 11.27 m Length - transport 37 ft 11.27 m Width 8 ft 2 in 2.49 m Wheelbase 9 ft 4 in 2.85 m Ground clearance - center 12 in 0.30 m Productivity Lift capacity 500 lbs 227 kg Platform rotation 160° Vertical jib rotation 135° Turntable rotation 360° continuous Turntable tailswing - riser up 3 ft 10 in 1.17 m Turntable tailswing - riser down 7 ft 4 in 2.24 m Drive speed - stowed 3.0 mph 4.83 km/h Drive speed - raised** 0.68 mph 1.1 km/h Lift speed to full height 76 sec Gradeability - 2WD - stowed*** 30% Gradeability - 4WD - stowed*** 45% Turning radius - 2WS inside 14 ft 6 in 4.42 m Turning radius - 2WS outside 24 ft 6 in 7.47 m Turning radius - 4WS inside 7 ft 2.13 m Turning radius - 4WS outside 15 ft 4.57 m Controls 12 V DC proportional Tires 18-625 NHS Power Power source Continental TME27 4 cylinder gas/LPG 74 hp (55 kW) T4i Deutz TD 2011 L04i 4 cylinder diesel 74 hp (55 kW) T4i Perkins 804D-33 4 cylinder diesel 63 hp (47 kW) Auxiliary power unit 12 V DC Hydraulic tank capacity 45 gal 170 L Fuel tank capacity – diesel machines 35 gal 132 L Fuel tank capacity – gas/LPG machines 30 gal 114 L Weight**** 2WS 35,900 lbs 16,284 kg 4WS 37,500 lbs 17,010 kg Standards Compliance « ANSI A92.5, CSA B354.4, EN 280, AS 1418.10 A A B B C C D D E E F G G H H
- 2. Features Self-Propelled Articulating Booms Standard Features Easily Confi gured To Meet Your Needs Genie United States 18340 NE 76th Street P.O. Box 97030 Redmond, Washington 98073-9730 Telephone +1 (425) 881-1800 Toll Free in USA/Canada +1 (800)-536-1800 Fax +1 (425) 883-3475 Distributed By: Options & Accessories Effective Date: January, 2014. Product specifi cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation. www.genielift.com Z™-80/60 Platform Options • Steel 8 ft (2.44 m) (standard) • Steel 6 ft (1.83 m) • Steel 8 ft (2.44 m) tri-entry Jib • 6 ft (1.83 m) jib boom Engine Options • 74 hp (55 kW) Continental gas/LPG • 74 hp (47 kW) Deutz T4i diesel • 63 hp (55 kW) Perkins T4i diesel Drive/Steer Options • 4WD (standard) • 2WS (standard) • 4WS Axle • Active oscillation Tire Options • Rough terrain foam-filled (standard) • Rough terrain non-marking foam-filled • High flotation air-filled rough terrain Productivity Options • Platform swing gate • Half-mesh platform inserts with swing gate • Platform top auxiliary rail • Welder package • Welder Ready package • Weld leads to platform • Air line to platform • Biodegradable hydraulic oil • Hostile environment kit • Deluxe hostile environment kit • Aircraft protection package (6 ft platform only) • Thumb rocker steer • Tool tray • Pipe cradles (pair) • Alarm package • Lockable platform control box covers • Work light package • Operator Protective Structure Power Options • AC generator packages (110V/60Hz - 220V/50Hz, 3000W) • Cold Weather Packages • Diesel catalytic scrubber muffler • LPG tank only, steel, 33.5 lbs (15.19 kg) capacity Measurements • 84 ft (25.77 m) working height • 60 ft (18.28 m) horizontal reach • 29 ft (8.83 m) up and over clearance • Up to 500 lbs (227 kg) lift capacity Productivity • 6 ft (1.83 m) jib • Self-leveling platform • 160° hydraulic platform rotation • Proportional joystick controls • Hydraulic oil cooler • Drive enable • AC power cord to platform • Horn • Hour meter • Tilt alarm • Descent alarm • 360° continuous turntable rotation • Positive traction drive • Two speed wheel motors • Four steering modes: front, rear, crab and coordinated • Configurable controls to limit lift height to 70 ft Power • 12 V DC auxiliary power • Anti-restart engine protection • Auto engine fault shutdown • On board full diagnostic and engine monitoring display • Block heater (Continental engine) • Dual battery Z80 0210L. Part No. 109365