![Ground Operations: Taxiing Step 2: Open Airport Navigator Plugin ZOOM IN: Press [crtl][shift][page up] on keyboard. ZOOM OUT: Press [crtl][shift][page down] on keyboard.](https://image.slidesharecdn.com/06-taxi-100201221749-phpapp01/85/Ground-Operations-Taxiing-3-320.jpg)
Ground Operations:Taxiing
- 1. Ground Operations: Taxiing Step 1: Close Checklister Plugin
- 2. Ground Operations: Taxiing Step 2: Open Airport Navigator Plugin SELECT: View the map.
- 3. Ground Operations: Taxiing Step 2: Open Airport Navigator Plugin ZOOM IN: Press [crtl][shift][page up] on keyboard. ZOOM OUT: Press [crtl][shift][page down] on keyboard.
- 4. Ground Operations: Taxiing Step 3: Test Brakes TEST: Release parking brake, increase throttle to 1200 RPM and test brakes. Adjust throttle to obtain normal taxi speed. Maximum taxi speed is 20 knots.
- 5. Ground Operations: Taxiing Step 4: Exit General Aviation Ramp LEFT: Turn left and center the airplane over the yellow taxiway centerline. Airport Navigator's red triangle shows your aircraft position and orientation.
- 6. Ground Operations: Taxiing Step 5: Taxiway November LEFT: Turn left onto taxiway November
- 7. Ground Operations: Taxiing Step 6: Taxiway Papa LEFT: Turn left onto taxiway Papa.
- 8. Ground Operations: Taxiing Step 7: Taxiway Delta RIGHT: Turn right onto taxiway Delta.
- 9. Ground Operations: Taxiing Step 8: Taxiway Alfa RIGHT: Turn right onto taxiway Alfa.
- 10. Ground Operations: Taxiing Step 9: Taxiway Bravo RIGHT: Turn right onto taxiway Bravo.
- 11. Ground Operations: Taxiing Step 10: Locate Run-Up area. PREPARE: Locate a suitable area to perform your Before Takeoff checklist. Typically there is an area short of the runway entrance clear of traffic.
- 12. Ground Operations: Taxiing Step 11: Stop STOP: Stop in the area to perform your Before Takeoff checklist. Set throttle to idle.