How to Connect Multiple Ethernet Switches : Notes
0 likes25 views
The document discusses three main technologies for connecting multiple Ethernet switches: switch cascade, switch stack, and switch cluster. It elaborates on different topologies, including daisy chain, ring, and star designs, as well as the advantages and disadvantages of each method. The choice of technology depends on specific networking needs and applications.
How to Connect Multiple Ethernet Switches : Notes
- 1. 16/09/2020 How to Connect Multiple Ethernet Switches | FS Community https://community.fs.com/blog/how-to-connect-multiple-ethernet-switches.html 1/6 How to Connect Multiple Ethernet Switches Jason Posted on January 17, 2020 12 14454 Normally, we combine several Ethernet switches together to meet our needs (port number, certain functions, etc.) when one switch can't. Then how to connect multiple Ethernet switches in networking? In general, there are three main technologies: switch cascade, switch stack and switch cluster. This article aims to elaborate on three technologies and the best way among them in switch to switch connection. Connect Multiple Ethernet Switches by Switch Cascade Cascading switch is a traditional way to connect multiple Ethernet switches, which comes with various methods involving diverse network topologies. By cascading more than one switch together, users can have multiple ports interconnecting each of the switches, all of which can be con gured and managed independently in the group. Among the switch cascade network, daisy chain topology and star topology are two common ways. Daisy Chain Topology – Daisy Chain Switches One by One Daisy chain topology, as its name implies, connects each switch in series to the next like the petals of a daisy. It is the simplest way to add more switches in a network. The structure of daisy chain network switches can be linear (where the switches at both ends are not connected, gure 1) which can be simply described as A-B-C, or circular (where the switches at both ends are not connected, gure 2) which can be simply described as A-B-C-D-E-F-A. Figure 1: daisy chain switches via linear topology Insight / Networking / Network Switch
- 2. 16/09/2020 How to Connect Multiple Ethernet Switches | FS Community https://community.fs.com/blog/how-to-connect-multiple-ethernet-switches.html 2/6 Figure 2: daisy chain switches via ring topology For no more than three Ethernet switches, a linear topology of daisy chaining is okay since there is no loop. However, it owns drawbacks in switch failure due to lacking redundancy. In linear topology, data must be transmitted from one switch to another in one direction. Once one network switch fails, the others will also be dragged in. In general, linear daisy chain networks are less exible, similar to electrical series circuits, where one interruption a ects other connected items. For more than three Ethernet switches, ring topology is better. It allows two-way transmission where data is sent in both directions. If the ring breaks at a particular link then the transmission can be sent via the reverse path, thereby ensuring that all switches are always connected in the case of a single failure. However, in ring topology, daisy chaining switches are inevitable to cause loop that can create broadcast storms and network congestion. So you’d better make sure your network switch support STP (Spanning Tree Protocol) to deal with the loop issue. Star Topology – Link Access Switches to the Core In a star topology, all the switches in a network are connected to a core switch through point to point link. In this way, information is transmitted from the central switch to the destination node, with any communication between two switches in a star network controlled by a central one. Star topology is widely used in connecting several gigabit switches together.
- 3. 16/09/2020 How to Connect Multiple Ethernet Switches | FS Community https://community.fs.com/blog/how-to-connect-multiple-ethernet-switches.html 3/6 Figure 3: link access switches to the core to form star topology When connecting Gigabit switches through star topology, a powerful switch (such as 40G switch) often acts as the core, which then connects to the access switches (such as 10G switches). In this scenario, no loop occurs and all access switches are much closer to the central switch. Connect Multiple Ethernet Switches by Switch Stack Switch stack is to combine multiple switches to make them work together for the purpose of providing as many ports as possible. Multiple switches are stacked to form a stack unit. And When stacking multiple switches together, the port density of a stack unit is the sum of the combined ports, greatly increasing the network connectivity. For example, stack two S3900-24T4S stackable Gigabit switch together, which then can provide 48 1GbE port density and nearly get twice switching capacity on the basis of one single switch stack. Usually, S3900 series switches can support up to 6 switches stacked together. Figure 4: six S3900-24T4s switches stacking together
- 4. 16/09/2020 How to Connect Multiple Ethernet Switches | FS Community https://community.fs.com/blog/how-to-connect-multiple-ethernet-switches.html 4/6 Connect Multiple Ethernet Switches by Switch Cluster Switch cluster can manage the multiple interconnected switches as a single logical device. Switch cascade and stack are prerequisites for cluster. In a cluster, there is usually only one administrative switch, called a command switch, which can manage other switches. In a network, these switches require just one IP address only for the command switch, which saves valuable IP addresses resources. Figure 5: a command switch and several member switches in a switch cluster unit Which Is the Best Way to Connect Multiple Ethernet Switches? Traditional cascading Ethernet switch (daisy-chain topology or star topology), as well as advanced switch stacking and switch clustering, are three ways to connect multiple network switches. Then which is the best? You need to know their di erences rst. The table below shows the di erences among switch cascade vs switch stack vs switch cluster, which will give you a better understanding of their respective properties. Switch Cascading Switch Stacking Switch Clustering Number of Connected switches No limitation in principle Limited Limited Bandwidth Won't be increased The bandwidth is much increased It depends on whether you adopt switc clustering or switch stacking for cluste bandwidth of clustering unit equals that unit or cascading unit Operation & Control Member switches are managed separately Member switches are managed as a whole by master switch Member switches are managed as a who switch Flexibility Almost all the switches can be cascaded Usually happens in stackable switches of Only speci c cluster-capable switches f
- 5. 16/09/2020 How to Connect Multiple Ethernet Switches | FS Community https://community.fs.com/blog/how-to-connect-multiple-ethernet-switches.html 5/6 From what is shown in the table, we can know that all of them have respective pros and cons. Therefore, how to connect multiple Ethernet switches should rely on your particular applications. Related articles: Stack Con guration on FS S3900 Series Switches Uplink Port Vs. Normal Port: Can I Use Uplink Port as Normal Port? Gigabit Switch Related Posts RJ45 vs SFP Port: Which Should Be Used to Connect Two Switches? Posted on January 17, 2020 RJ45 port vs SFP port, which one would be better for 1000Mbps connections? There are some principles we could follow. By Charlene Gigabit Switch Selecting the Best Gigabit Switch for Home Network Posted on December 26, 2019 Why Gigabit Ethernet switch is needed for the home network? How to select the best gigabit switch for th e home network? Figure them out in this post. By Larry Gigabit Switch Home Network Understanding Link Aggregation Control Protocol Posted on September 6, 2019 LACP is a subcomponent of IEEE 802.3ad (Link Aggregation) standard. The standard prescribes that LACP can be a method to bundle multiple physical links between network devices into a single logical link y regardless of manufacture and types same models from the same manufacturer manufacturer can be cluste IP Address Management Each switch has one IP address All the switches share a single IP address Only one IP address for comman
- 6. 16/09/2020 How to Connect Multiple Ethernet Switches | FS Community https://community.fs.com/blog/how-to-connect-multiple-ethernet-switches.html 6/6 FS.com About FS FS APP FS Products Contribute Contact Help Privacy Terms can be a method to bundle multiple physical links between network devices into a single logical link. By Howard Gigabit Switch Subscribe Get the latest news from FS Follow Us Your Email Address