How to Use the Copier to Scan (Toshiba eStudio 523)
0 likes188 views
This document provides step-by-step instructions on how to use a Toshiba e-Studio 523 copier as a scanner. It details the process of logging onto the copier, placing documents, using a USB stick, and adjusting scan settings. The instructions conclude with guidance on finishing the scan and removing the USB device safely.
How to Use the Copier to Scan (Toshiba eStudio 523)
- 1. Use the copier as a scanner Instructions for the Toshiba-e-studio-523
- 2. Using the copier to SCAN Log on to the copier. Place your document on the glass for copying.1 Place your USB stick in the port on the right side of the control panel. 2 • “FOUND USB DEVICE” Wait for the message on the bottom-left corner of the display:
- 3. Press the SCAN button. (It's usually on COPY by default)3 SCAN button
- 4. Select USB. Press OK to accept all the defaults.4 Select SCAN SETTING. Adjust as needed and press OK.5 4 5
- 5. Press SCAN. If you have multiple pages, press SCAN before each page. 6 Press JOB FINISH when scanning is complete. 7 6 Wait for message at bottom-left before removing your USB stick:8 “USB DEVICE CAN BE REMOVED” 7