HP Elite x3 Manual / User Guide

© Copyright 2016 HP Development Company,
L.P.
Bluetooth is a trademark owned by its
proprietor and used by HP Inc. under license.
MicroSD is a trademark or registered
trademark of SD-3C in the United States, other
countries or both. OneDrive and Windows are
either registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
The information contained herein is subject to
change without notice. The only warranties for
HP products and services are set forth in the
express warranty statements accompanying
such products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.
Second Edition: October 2016
First Edition: July 2016
Document Part Number: 855137-002
Product notice
This user guide describes features that are
common to most models. Some features may
not be available on your device.
Not all features are available in all editions or
versions of Windows. Systems may require
upgraded and/or separately purchased
hardware, drivers, software or BIOS update to
take full advantage of Windows functionality.
Windows 10 is automatically updated, which is
always enabled. ISP fees may apply and
additional requirements may apply over time
for updates. See http://www.microsoft.com.
To access the latest user guides or manuals for
your product, go to http://www.hp.com/
support. Select Find your product, and then
follow the on-screen instructions.
Software terms
By installing, copying, downloading, or
otherwise using any software product
preinstalled on this device, you agree to be
bound by the terms of the HP End User License
Agreement (EULA). If you do not accept these
license terms, your sole remedy is to return the
entire unused product (hardware and software)
within 14 days for a full refund subject to the
refund policy of your seller.
For any further information or to request a full
refund of the price of the device, please contact
your seller.

Table of contents
1 Welcome ....................................................................................................................................................... 1
Finding information ............................................................................................................................................... 2
2 Components .................................................................................................................................................. 4
Locating hardware ................................................................................................................................................. 4
Locating software .................................................................................................................................................. 4
Locating help .......................................................................................................................................................... 4
Front ....................................................................................................................................................................... 5
Back ........................................................................................................................................................................ 8
Labels ................................................................................................................................................................... 10
Installing nano SIM cards ..................................................................................................................................... 10
Inserting nano SIM cards ................................................................................................................... 10
3 Expanding the display .................................................................................................................................. 12
Accessing Continuum ........................................................................................................................................... 12
Opening an app on an external display ............................................................................................................... 12
Closing a window on an external display ............................................................................................................ 13
Switch apps .......................................................................................................................................................... 13
Using the optional lap dock ................................................................................................................................. 14
Connecting to AC power .................................................................................................................... 14
Connecting your device ..................................................................................................................... 15
Wired connection ............................................................................................................ 15
Wireless connection ........................................................................................................ 15
Connecting using the optional desk dock ........................................................................................................... 16
Discovering and connecting to Miracast-compatible wireless displays ............................................................. 17
Using HP Workspace (select products only) ........................................................................................................ 18
4 Network connections ................................................................................................................................... 19
Connecting to a wireless network ....................................................................................................................... 19
Using the network and wireless controls .......................................................................................... 19
Connecting to a WLAN ....................................................................................................................... 19
Connecting to cellular networks ....................................................................................................... 20
Using Bluetooth wireless devices ...................................................................................................... 20
Connecting Bluetooth devices ........................................................................................ 21
Connecting to a wired network—LAN (select products only) .......................................................... 21
Sharing or paying wirelessly ................................................................................................................................ 21
iii

5 Screen navigation ........................................................................................................................................ 22
Using gestures ..................................................................................................................................................... 22
Tap ..................................................................................................................................................... 22
Swipe ................................................................................................................................................. 22
Two-finger pinch zoom ..................................................................................................................... 23
One-finger slide ................................................................................................................................. 23
Using one-finger slide on an optional lap dock .............................................................. 23
Using an optional keyboard and optional mouse ............................................................................................... 23
Using the on-screen keyboard .......................................................................................................... 24
Using the screen features .................................................................................................................................... 24
Using the display ............................................................................................................................... 24
Using the navigation bar ................................................................................................................... 24
Viewing the status bar ...................................................................................................................... 25
Checking notifications, changing settings, and accessing shortcuts ............................................... 26
6 Using the voice calling and texting features ................................................................................................... 27
7 Adding apps ................................................................................................................................................ 28
8 Using email and social networks ................................................................................................................... 29
Setting up email accounts ................................................................................................................................... 29
Setting up a social media account ....................................................................................................................... 29
Sending email ...................................................................................................................................................... 29
9 Printing ...................................................................................................................................................... 30
10 Using the HP12C Financial Calculator app .................................................................................................... 31
11 Entertainment features .............................................................................................................................. 32
Using the camera ................................................................................................................................................. 32
Using audio .......................................................................................................................................................... 34
Connecting speakers ......................................................................................................................... 34
Connecting headphones .................................................................................................................... 35
Connecting headsets ......................................................................................................................... 35
Changing the volume ........................................................................................................................ 35
Using sound settings ......................................................................................................................... 36
12 Power management ................................................................................................................................... 37
Turning off the device .......................................................................................................................................... 37
Setting power options ......................................................................................................................................... 37
iv

Using power-saving states ................................................................................................................ 37
Initiating and exiting screen off ...................................................................................... 37
Using the battery saver .................................................................................................. 37
Using battery power .......................................................................................................................... 37
Displaying the remaining battery charge ....................................................................... 38
Maximizing battery discharge time ................................................................................ 38
Managing low battery levels ........................................................................................... 38
Identifying low battery levels ...................................................................... 38
Resolving a low battery level ....................................................................... 38
Conserving battery power .............................................................................................. 38
Disposing of a battery ..................................................................................................... 39
Using wireless charging .................................................................................................. 39
Using external AC power ................................................................................................................... 39
Testing an AC adapter ..................................................................................................... 40
13 Sharing and backing up your data ............................................................................................................... 41
Using OneDrive .................................................................................................................................................... 41
Using a microSD memory card ............................................................................................................................ 41
Inserting a microSD memory card .................................................................................................... 41
Using Storage ....................................................................................................................................................... 42
Determining storage space ............................................................................................................... 42
Using Backup ....................................................................................................................................................... 42
Restoring or resetting your device ...................................................................................................................... 43
14 Security .................................................................................................................................................... 44
Setting PIN protection ......................................................................................................................................... 44
Using Windows Hello ........................................................................................................................................... 44
Setting double-tap-to-wake feature ................................................................................................................... 44
Using a Microsoft account ................................................................................................................................... 45
Locking and unlocking the screen ....................................................................................................................... 45
Locking the screen ............................................................................................................................ 45
Unlocking the screen ......................................................................................................................... 45
Using HP Display Tools to protect your screen ................................................................................................... 45
15 Maintenance .............................................................................................................................................. 46
Displaying system information ........................................................................................................................... 46
Updating the operating system and apps ........................................................................................................... 46
Updating the operating system ........................................................................................................ 46
Updating apps ................................................................................................................................... 46
Diagnostics .......................................................................................................................................................... 46
v

Cleaning your device ............................................................................................................................................ 47
Cleaning procedures .......................................................................................................................... 47
Cleaning the display ........................................................................................................ 47
Cleaning the sides ........................................................................................................... 47
Shipping your device ............................................................................................................................................ 48
16 Accessibility .............................................................................................................................................. 49
Supported assistive technologies ....................................................................................................................... 49
Contacting support .............................................................................................................................................. 49
Index ............................................................................................................................................................. 50
vi

1 Welcome
After you set up and register the device, we recommend the following steps to get the most out of your smart
investment:
IMPORTANT: You must unlock the screen any time the screen turns off.
▲ Press the power button, and then swipe up from the middle of the screen. If prompted, enter your PIN.
TIP: To quickly return to the Start screen from an open app, tap from the Navigation Bar at the bottom
of the screen.
● Expand your display—Using the desk dock (purchased separately) and Continuum, you can connect
your device to an external display. The desk dock can also be used to connect your device to a keyboard
and mouse. See Expanding the display on page 12.
● Connect to the Internet—Set up your network so that you can connect to the Internet. For more
information, see Network connections on page 19.
● Get to know your device—Learn about your device features. See Components on page 4 and Screen
navigation on page 22.
● Find help—Learn about the screen and software features on your device. See Locating help
on page 4.
● Find installed apps—Access a list of the apps preinstalled on the device:
▲ Swipe left from the right edge of the Start screen.
● Add more apps—Use the Store app to download apps for your device. See Adding apps on page 28.
● Share your files and back up your apps and files—Set up a method for sharing and backing up using a
OneDrive® account or a microSD memory card. See Sharing and backing up your data on page 41.
1

Finding information
To locate resources that provide product details, how-to information, and more, use this table.
Resource Contents
Quick Start ● Overview of device setup and features
The Get Started app
IMPORTANT: The Get Started app requires an Internet
connection.
▲ Swipe left from the right edge of the Start screen to
display all apps, and then tap Get Started. Tap ,
and then select a topic.
● Detailed instructions and videos to help you learn about your
device.
HP support
For HP support, go to http://www.hp.com/support.
● Online chat with an HP technician
● Support telephone numbers
● HP service center locations
Safety & Comfort Guide
To access this guide:
▲ Swipe up from the middle of the Start screen, tap
HP Device Hub, and then tap User Guide.
Select your language if prompted to do so, and then
tap Safety & Comfort Guide.
‒ or –
▲ Go to http://www.hp.com/ergo.
IMPORTANT: You must be connected to the Internet
to access the latest version of the guide.
● Proper workstation setup
● Guidelines for posture and work habits that increase your comfort
and decrease your risk of injury
● Electrical and mechanical safety information
Regulatory, Safety and Environmental Notices
To access this document:
tap Regulatory, Safety and Environmental Notices.
to access the latest version of the document.
● Important regulatory notices, including information about proper
battery disposal, if needed.
Limited Warranty*
tap Warranty.
‒ or –
▲ Go to http://www.hp.com/go/orderdocuments.
● Specific warranty information about this device
2 Chapter 1 Welcome

Resource Contents
to access the latest version of the document.
*You can find your HP Limited Warranty located with the user guides on your product. In some countries or regions, HP may provide the
HP Limited Warranty in the box. For countries or regions where the warranty is not provided in the box, you can find it on the Web. To
access an online copy or order a printed copy of your warranty, go to http://www.hp.com/go/orderdocuments. For products purchased
in Asia Pacific, you can write to HP at POD, P.O. Box 161, Kitchener Road Post Office, Singapore 912006. Include your product name and
your name, phone number, and postal address.
Finding information 3

2 Components
Locating hardware
To find out what hardware is installed on your device:
1. Swipe up from the middle of the Start screen.
2.
Tap HP Device Hub.
Information about the system hardware components on your device is displayed.
Locating software
To find out what software is installed on your device:
▲ Swipe left from the right edge of the Start screen to display all apps.
Locating help
The Get Started app provides detailed instructions, slideshows, and videos to help you learn about your
device.
IMPORTANT: The Get Started app requires an Internet connection.
▲ Swipe left from the right edge of the Start screen to display all apps, and then tap Get Started. Tap ,
and then select a topic.
NOTE: For additional information, tap to use the search feature.
NOTE: To access search from the lock screen:
▲ Tap and hold .
4 Chapter 2 Components

Component Description
(1) Power light ● Red: The battery is near depletion and is being charged.
This light will remain on until the battery is charged
enough for the device to be functional.
● Green: AC power is connected and the battery is fully
charged.
(2) Ambient light sensor Detects the light in the surrounding area and then adjusts the
brightness of the display.
To set automatic brightness adjustment:
▲
Swipe down from the top of the screen, tap All
settings, tap System, tap Display, and then follow the on-
screen instructions.
(3) Earpiece Produces sound for phone calls.
(4) Audio-out (headphone)/Audio-in (microphone)
combo jack
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional microphone-only devices.
WARNING! To reduce the risk of personal injury, adjust the
volume before using headphones, earbuds, or a headset. For
additional safety information, see the Regulatory, Safety and
Environmental Notices.
▲
Swipe up from the middle of the Start screen, tap
HP Device Hub, and then tap User Guide. Select your
language if prompted to do so, and then tap Regulatory,
Safety and Environmental Notices.
IMPORTANT: You must be connected to the Internet to access
the latest version of the document.
NOTE: When a device is connected to the jack, the external
speakers are disabled.
(5) Camera Records video and captures photographs.
To use your camera:
▲
Tap on the Start screen.
For more information, see Using the camera on page 32.
(6) Iris camera Allows iris recognition to unlock your device, instead of a PIN.
For more information, see Using Windows Hello on page 44.
(7) Power button ● When the device is off, press the button for about 5
seconds until the device vibrates to turn on the device.
● When the device is on, press the button briefly to turn off
and lock the screen.
● When the screen is off, press the button to display the lock
screen.

● When the device is on, press and hold the button until the
slide down to power off message appears. Release the
button, and then swipe down to turn off the device.
NOTE: The device will power on when connected to a power
source.
(8) Volume up button Increases speaker volume incrementally while you hold down
the button. The volume status bar appears when you press this
button. For more information, see Changing the volume
on page 35.
(9) Volume down button Decreases speaker volume incrementally while you hold down
the button. The volume status bar appears when you press this
button. For more information, see Changing the volume
on page 35.
(10) Internal microphone Transmits sound for phone calls and records sound for other
applications on your device.
(11) Speaker Produces sound.
(12) USB Type-C charging port Connects to the AC adapter to provide power to the device,
connects to the desk dock, or connects to any USB device with a
Type-C connector.
NOTE: Adapters (purchased separately) may be required.
(13) Nano SIM/MicroSD memory card reader Supports a nano subscriber identity module (SIM) card and a
microSD memory card in a dual-compartment tray. Select
products support two SIM cards. For installation instructions,
see Inserting nano SIM cards on page 10 or Inserting a
microSD memory card on page 41.
Place your fingernail in the small recess on the bottom of the
card tray and pull the tray out to remove it from the device.
NOTE: Your device has read/write support for microSD
memory cards up to 2 TB.
Front 7

Back
(1) WWAN antennas* Send and receive wireless signals to communicate with wireless
wide area networks (WWANs).
(2) WLAN antennas* Send and receive wireless signals to communicate with wireless
local area networks (WLANs).

(3) Internal microphones Transmit sound and record sound for your device.
(4) Flash and flashlight Provides light for photographs and videos, and can operate as a
flashlight.
For information about flash settings, see Using the camera
on page 32.
To access the flashlight:
▲ Swipe down from the top of the screen, tap Expand, and
then tap Flashlight.
Tap Flashlight again to turn off the flashlight.
(5) Fingerprint reader Allows a fingerprint recognition to unlock your device instead of
a PIN.
For more details, see Using Windows Hello on page 44.
NOTE: The fingerprint reader may require additional software.
For more information, go to http://www.hp.com/support.
(6) NFC tapping area and antenna* Allows you to share data and files with another device that has
Near Field Communications (NFC). Simply touching the devices
together. For more information, see Sharing or paying wirelessly
on page 21.
(7) Wireless charging area Allows you to charge your device wirelessly. For more
information, see Using wireless charging on page 39 .
(8) Accessory connector Connects optional accessories that support Pogo pin connectors.
(9) Camera Records video and captures photographs.
To use the camera:
▲
Tap on the Start screen.
For more details, see Using the camera on page 32.
*The antennas are not visible from the outside of the device. For optimal transmission, keep the areas immediately around the
antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices
that applies to your country or region.
▲
Swipe up from the middle of the Start screen, tap HP Device Hub, and then tap User Guide. Select your language if
prompted to do so, and then tap Regulatory, Safety and Environmental Notices.
IMPORTANT: You must be connected to the Internet to access the latest version of the document.
Back 9

Labels
The labels for the device provide information you may need when you troubleshoot system problems or
travel internationally with the device.
IMPORTANT: Check the following locations for the labels described in this section: the back of the device,
the device box, and the electronic regulatory labels.
To access the electronic regulatory labels:
▲
Swipe up from the middle of the Start screen, tap HP Device Hub, and then tap Regulatory.
● Service label—Provides important information to identify your device. When contacting support, you
will probably be asked for the serial number, IMEI number, and possibly for the product number or the
model number. Locate these numbers before you contact support.
● Regulatory label(s)—Provide(s) regulatory information about the device.
● Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval
markings for the countries or regions in which the devices have been approved for use.
Installing nano SIM cards
Your device supports the following cards:
● Nano SIM card—Connects the device to a cellular or mobile data network, allowing you to use the calling
and texting features on the device.
● Secondary nano SIM card (select products only)—Connects the device to a cellular or mobile data
network. This card allows you to use a second phone number for the device’s calling and texting
features.
IMPORTANT: The top side of the card tray may include “UP” and/or “1” and “2” marks that must face up
when you install the cards and insert the tray. Before inserting the tray into the device, position the device
with the screen facing up, and be sure that the marks on the tray are facing up. Do not use force to remove or
replace the tray.
IMPORTANT: Do not cut or sand the SIM card to resize it.
NOTE: Your device also supports a microSD memory card, which provides external storage. Use this card
with the Storage app; see Using Storage on page 42 for more information. You cannot use a second nano
SIM card at the same time you use a microSD memory card. Only one card can be installed in the second
compartment at a time. You can switch the cards.
Inserting nano SIM cards
NOTE: You can insert or remove a nano SIM card without turning off your device.
To insert a nano SIM card, follow these steps:
1. Place your fingernail in the small recess on the bottom of the card tray, pull out the tray (1), and then
remove it from the device.

NOTE: The nano SIM card in your device may look different from the illustration in this section.
2. Insert the nano SIM card (2) into slot 1, the one closest to the device.
NOTE: For select products, a second nano SIM card is supported. Continue to step 4 to install a second
SIM card.
3. Replace the tray (3) in the device.
4. If your device supports a second nano SIM card, insert the nano SIM card (1) into slot 2, and then replace
the tray (2) in the device.
NOTE: Install the second SIM card in the same direction as the first SIM card.
Installing nano SIM cards 11

3 Expanding the display
Expand your viewing experience to a larger display using Continuum, an optional desk dock, an optional lap
dock, or a Miracast-compatible wireless display. You can also connect an optional keyboard and mouse.
NOTE: You can use an HDMI-to-DVI cable (purchased separately) or an active DisplayPort-to-DVI cable
(purchased separately) to connect the optional desk dock to your external display. An HDMI-to-VGA cable will
work in most cases, but it will not work for video content.
Accessing Continuum
1. On your device, swipe left from the right edge of the Start screen to display all of the apps.
2.
Tap Continuum , and then follow the on-screen instructions.
Opening an app on an external display
1. Select in the desktop view of the external display.
The Start menu that opens will match your device’s Start screen.
NOTE: If an app is dimmed on the external display, you cannot run it on Continuum’s desktop view.
2. Select an app on the Start screen or apps menu.
Your device controls the external display as long as you stay in the Continuum app. If you want to use your
device normally, go to any other view. The apps open in the desktop view stay open.
12 Chapter 3 Expanding the display

NOTE: Connect a mouse and keyboard through the desk dock to control the display with a mouse and
keyboard. Using a mouse and keyboard allow you to perform tasks on your device while you perform other
tasks on the external display.
Closing a window on an external display
Rest the pointer on the top-right corner of the external screen. When the X appears, select it to close the
window.
Switch apps
Select the Task view icon on the taskbar of the external screen.
NOTE: You can view only one app at a time. Use the Task view icon to switch between open apps.
Closing a window on an external display 13

Using the optional lap dock
NOTE: For information about the features and requirements of the lap dock, refer to the documentation
provided with the dock.
Connecting to AC power
WARNING! To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin
outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding
pin is an important safety feature.
To ensure the correct performance of all lap dock features, connect the lap dock to an AC power source using
the lap dock power cord.
1. Connect the power cord and AC adapter to an AC outlet (1).
2. Connect the other end of the power cord and AC adapter to either USB Type-C power connector and
Super Speed port on the right side of the lap dock (2).

Connecting your device
Wired connection
To connect your device to the lap dock using the cable included with the lap dock:
1. Press and hold the power button until the lap dock turns on.
2. Connect the cable included with the lap dock to the port for your device on the left side of the lap dock.
3. Connect the other end of the cable to the connector on your device.
NOTE: The first time you connect your device to the lap dock, select I see it on your device and follow
the on-screen instructions.
TIP: There might be a slight delay before the lap dock is ready for use.
NOTE: While your device is connected to the lap dock via the included cable, the lap dock charges your
device.
Wireless connection
TIP: For optimal wireless performance, connect your device to a wireless router at 5 GHz. If there is
interference from other wireless devices, use a wired connection.
1. Press and hold the power button to turn on the lap dock.
2. Swipe left on the Start screen to display all apps, and then tap Continuum.
3. Select Set up the first time you connect.
Using the optional lap dock 15

4. Select Wireless adapter, select Connect, and then select HP Lap Dock XXXXX.
Connecting using the optional desk dock
NOTE: Additional adapters may be required. For information about the features and requirements of the
desk dock, refer to the documentation provided with the dock.
NOTE: Refer to the documentation provided with the accessories for installation instructions and pairing
requirements.
1. Turn on your device.
2. Plug the desk dock into an AC outlet.
3. Connect the optional monitor and adapter to the desk dock.
4. Connect any other wired options to the desk dock. For example, connect a USB keyboard.
5. Pair any wireless options to your device. For example, connect a Bluetooth® mouse.

6. Insert your device into the desk dock.
7. The Continuum instructions appear on the screen. Follow the instructions to continue.
Discovering and connecting to Miracast-compatible wireless
displays
NOTE: To determine if your TV or secondary display is Miracast-compatible, refer to the documentation that
came with the display.
To discover and connect to Miracast-compatible wireless displays, follow the steps below.
To open Miracast:
1. Start Miracast on your external display. Refer to the documentation provided with the display.
2. On your device, swipe down from the top of the screen, and then tap All settings.
3. Tap System, and then tap Display.
4. Tap Connect to a wireless display, and then follow the on-screen instructions.
To control the external display:
▲ Tap Tap to control at the top of your device screen.
The TouchPad control appears on your device screen. Use your finger to control the cursor on the external
display.
NOTE: If an app is dimmed on the external display, you cannot run the app on the display.
Discovering and connecting to Miracast-compatible wireless displays 17

Using HP Workspace (select products only)
HP Workspace allows your device to access your legacy Windows® applications on your device while it is
docked. For added versatility, use the optional desk dock to connect to a large display, keyboard, and mouse.
NOTE: HP Workspace must be enabled by your IT administrator.
Accessing the HP Workspace app
1. Swipe left from the right edge of the Start screen to display all of the apps.
2. Tap HP Workspace, and then follow the on-screen instructions.

4 Network connections
NOTE: Contact your IT administrator for proxy settings, VPN configurations, or other network connection
requirements.
Connecting to a wireless network
Your device may be equipped with one or more of the following wireless devices:
● WLAN device—Connects the device to wireless local area networks (commonly referred to as Wi-Fi
networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports,
restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your device
communicates with a wireless router or a wireless access point.
● Mobile broadband module—A wireless wide area network (WWAN) device that gives you wireless
connectivity over a much larger area. Mobile network operators install base stations (similar to cell
phone towers) throughout large geographic areas, effectively providing coverage across entire states,
regions, or even countries.
● Bluetooth device—Creates a personal area network (PAN) to connect to other Bluetooth-enabled
devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device
communicates directly with other devices, and devices must be relatively close together—typically
within 10 meters (approximately 33 feet) of each other.
Using the network and wireless controls
The Network & wireless option allows you to set up a connection or network, connect to a network, create a
mobile hotspot, and see your data usage.
To use network and wireless controls, follow these steps:
2. Tap Network & wireless, and then select an option to continue.
NOTE: For additional help, refer to the Get Started app; this app requires an Internet connection. Swipe left
from the right edge of the Start screen to display all apps, and then tap Get Started. Tap , tap Browse
topics, and then tap Get connected.
Connecting to a WLAN
NOTE: When you are setting up Internet access in your home, you must establish an account with an
Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will
help set up the modem, install a network cable to connect your wireless router to the modem, and test the
Internet service.
To connect to a WLAN, follow these steps:
1. Be sure that the WLAN device is on.
Connecting to a wireless network 19

3. Tap Network & wireless.
4. Tap Wi-Fi.
5. Make sure Wi-Fi networking is set to On, and then connect to one of the available networks.
If the WLAN is a security-enabled WLAN, you are prompted to enter a password. Enter the password, and
then tap Done to complete the connection.
NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.
NOTE: If you do not see the WLAN you want to connect to, tap Manage, tap +, and then follow the on-
screen instructions to complete the connection.
After the connection is made, swipe down from the top of the screen, and then view to verify the name
and status of the connection.
NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router
manufacturer, and interference from other electronic devices or structural barriers such as walls and floors.
Connecting to cellular networks
Your device supports a nano SIM card for connecting to cellular and data networks. Select products also
support a second nano SIM card, which allows your device to have two different phone numbers. See
Installing nano SIM cards on page 10 for SIM card installation steps.
To access cellular and SIM settings:
1. Swipe down from the top of the screen, and then tap All settings.
2. Tap Networks & wireless, and then tap Cellular & SIM.
3. Follow the on-screen instructions.
NOTE: For additional information, tap Learn more.
Using Bluetooth wireless devices
A Bluetooth device provides short-range wireless communications that replace the physical cable connections
that traditionally link electronic devices such as the following:
● Computers (desktop, notebook)
● Phones (cellular, cordless, smartphone)
● Imaging devices (printer, camera)
● Audio devices (headset, speakers)
● Mouse
● External keyboard
Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices.
20 Chapter 4 Network connections

Connecting Bluetooth devices
Before you can use a Bluetooth device, you must establish a Bluetooth connection.
1. Be sure that the Bluetooth device is on.
3. Tap Devices.
4. Tap Bluetooth.
5. Make sure Status is set to On.
6. Select your Bluetooth device from the list, and then follow the on-screen instructions.
NOTE: If the Bluetooth device requires verification, a pairing code is displayed. On the Bluetooth device you
are adding, follow the on-screen instructions to verify that the code on your Bluetooth device matches the
pairing code. For more information, refer to the documentation provided with the Bluetooth device.
NOTE: If your Bluetooth device does not appear in the list, be sure that Bluetooth function on that Bluetooth
device is turned on. Some Bluetooth devices may have additional requirements; refer to the documentation
provided with the Bluetooth device.
Connecting to a wired network—LAN (select products only)
Use a LAN connection if you want to connect the device directly to a router in your home (instead of working
wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an RJ-45 (network) cable and the optional desk dock.
For more information about the desk dock ports, refer to the documentation provided with the desk dock.
Contact your IT administrator for proxy settings or VPN configurations.
NOTE: Support for LAN connections via proxy may require additional software. For more information, go to
http://www.hp.com/support.
Sharing or paying wirelessly
NFC technology lets your device communicate with other devices that support NFC. With NFC and supported
apps, you can wave the device over a display at a conference to view more information, tap devices with a
coworker to share work products, or swipe your device to pay at a store.
To enable NFC on your device:
2. Tap Devices.
3. Tap NFC, and then follow the on-screen instructions to select Tap to share or Tap to pay, and make
selections for their settings.
4. Tap the NFC tapping area of your device to the NFC tapping area of another device. You may hear a sound
when the devices are connected.
NOTE: For the location of the NFC tapping area on your device, see Back on page 8.
Sharing or paying wirelessly 21

5 Screen navigation
You can navigate the device screen in the following ways:
● Use touch gestures directly on the screen.
● Use an optional keyboard and optional mouse with the desk dock (purchased separately).
● Use an optional lap dock (purchased separately).
Using gestures
To navigate the screen, touch the screen directly using gestures described in this chapter.
NOTE: If you are using a lap dock, additional gestures are available on the lap dock TouchPad. For more
information, refer to the documentation provided with the lap dock.
Tap
Use the tap gesture to open an item on the screen.
● Tap an item to open it.
Swipe
Place your finger on the screen, quickly slide your finger a short distance, and then lift it.
22 Chapter 5 Screen navigation

Two-finger pinch zoom
Use the two-finger pinch zoom to zoom out or in on images or text.
● Zoom out by placing two fingers apart on the screen and then moving your fingers together.
● Zoom in by placing two fingers together on the screen and then moving your fingers apart.
One-finger slide
Use the one-finger slide to pan or scroll through lists and pages, or to move an object.
● To scroll across the screen, lightly slide one finger across the screen in the direction you want to move.
● To move an object, press and hold your finger on an object, and then drag your finger to move the object.
Using one-finger slide on an optional lap dock
Your device can be used as a TouchPad with an optional lap dock.
1. Connect your device to the lap dock.
2. Swipe left from the right edge of the Start screen to display all apps, and then tap Continuum.
After you connect, you can use the one finger-slide on your device as a Touchpad for the lap dock.
Using an optional keyboard and optional mouse
A keyboard and mouse allow you to type, select items, scroll and to perform the same functions as you do
using touch gestures. A keyboard also allows you to use action keys and key combinations to perform specific
functions.
For more information about connecting a keyboard or mouse, see Expanding the display on page 12.
NOTE: Depending on the country or region, your keyboard may have different keys and keyboard functions
than those discussed in this section.
Using an optional keyboard and optional mouse 23

Using the on-screen keyboard
The device has an on-screen keyboard that is displayed as needed. Just begin typing when it is displayed.
To access settings for the on-screen keyboard, swipe down from the top of the screen, tap All settings,
and then tap Time & language. Tap Keyboard, and then follow the on-screen instructions to select the
language and other settings for your keyboard.
NOTE: Hot keys do not display or function on the on-screen keyboard.
NOTE: Suggested words may be displayed at the top of the on-screen keyboard. Tap a word to select it.
Using the screen features
NOTE: For additional information about the screen features, refer to the Get Started app; this app requires
an Internet connection. Swipe left from the right edge of the Start screen to display all apps, and then tap Get
Started. Tap , tap Browse topics, and then tap Find your way around.
Using the display
IMPORTANT: Any time your screen turns off, press the power button, and then swipe up from the middle of
the screen. Enter your PIN, if prompted to do so. If the screen does not turn on, connect your device to a
power source. See Using external AC power on page 39.
You can customize the device display. For example, you can choose what the lock screen displays and choose
the amount of time before the device screen turns off.
Customizing the lock screen
1. Swipe down from the top of the screen, and tap All settings.
2. Tap Personalization, and then tap Lock screen.
3. Make sure My picture displays in the Background selection box, and then tap Browse.
4. Select a photo, and then follow the on-screen instructions.
Setting the screen turn-off time
1. Swipe down from the top of the screen, and tap All settings.
2. Tap Personalization, and then tap Lock screen.
3. Select a time from the Screen times out after selection box.
For additional information, refer to the Get Started app; this app requires an Internet connection. Swipe left
from the right edge of the Start screen to display all apps, and then tap Get Started. Tap , tap Browse
topics, tap Make it yours, and then follow the on-screen instructions.
Using the navigation bar
The navigation bar displays three keys across the bottom.

Key Action
Displays the previous screen.
Displays the Start screen.
Displays the search box, which allows you to begin typing the
name of an app, setting, or file, or Internet topic.
If your device has Cortana (select products only), tap and hold the
microphone icon , located under the search box, and say a
search word.
NOTE: To hide the navigation bar from the Start screen, swipe up from the navigation bar area. To see the
navigation bar again, swipe up from the bottom of the screen.
Viewing the status bar
The status bar at the top of the screen displays information about the wireless connections, SIM card status,
battery life, and the time.
Your icons may vary, but some of the common icons are shown in the following table. For a complete list, refer
to the Get Started app; this app requires an Internet connection. Swipe left from the right edge of the Start
screen to display all apps, and then tap Get Started. Tap , tap Browse topics, tap Find your way around,
and then tap Icons on your phone.
Icon Status
Your device has no mobile network connection.
No SIM card is installed in the primary compartment of the card
tray. If your device supports a second SIM card and the second
tray compartment is empty, the numeral on the icon will be 2.
Airplane mode is on.
Your device is connected to Wi-Fi.
A Bluetooth device is connected to your device.
The battery is fully charged.
An app or service is using your location.
Using the screen features 25

Checking notifications, changing settings, and accessing shortcuts
The action center displays notifications, such as missed calls or texts, and provides quick access to settings
and other shortcuts.
NOTE: The action center can be accessed from a locked screen. However, you will be prompted to unlock the
screen for certain actions.
1. Swipe down from the top of the screen to display the action center.
2. To display additional shortcuts, tap Expand.
To close the action center, swipe up from the middle of the screen.

6 Using the voice calling and texting features
Icon Description
Make a call—Tap on the Start screen, and then tap . Tap the keys to enter the phone number, and then
tap .
– or –
Tap People on the Start screen, tap a contact name, and then tap Call.
Answer a call—Tap .
End a call—Tap .
Check voicemail—Tap on the Start screen, and then tap .
Return a recent call—Tap on the Start screen, and then tap a recent call to return it.
Ignore a call—Tap to ignore a call.
Text a message—Tap on the Start screen, and then tap . Enter the name of a contact to text or enter a
number to text, and then tap the Type a message field to start a new text message.
Contacts—Allows you to store information for frequently contacted people. Swipe left from the right edge of the
Start screen to display all apps, tap People, and then tap to add a contact.
NOTE: For additional calling and texting information, see the Get Started app; this app requires an Internet
connection. Swipe left from the right edge of the Start screen to display all apps, and then tap Get Started.
Tap , tap Browse topics, and then tap Calling and messaging.
27

7 Adding apps
Use the Store app to download additional apps to your device.
1. Swipe left from the right edge of the Start screen to display all apps.
2. Tap Store, and then tap at the top of the screen.
3. Tap the search field, type your search term, and then tap .
28 Chapter 7 Adding apps

8 Using email and social networks
NOTE: For additional information about emails and social media accounts, see the Get Started app; this app
requires an Internet connection. Swipe left from the right edge of the Start screen to display all apps, and
then tap Get Started. Tap , tap Browse topics, and then tap Set things up.
Setting up email accounts
2. Tap Accounts.
3. Tap Email & app accounts, and then follow the on-screen instructions.
Setting up a social media account
NOTE: Use the Store app to download social networking apps. See Adding apps on page 28.
2. Tap the social networking app you want, and then follow the on-screen instructions.
Sending email
Tap Outlook Mail on the Start screen, and then follow the on-screen instructions.
Setting up email accounts 29

9 Printing
The HP AiO Printer Remote app provides an easy way to set up and access all features of your optional HP
printer. Use the app to print Portable Document Format (PDF) documents, photos, and scanned documents.
2. Tap HP AiO Printer Remote, and then follow the on-screen instructions.
30 Chapter 9 Printing

10 Using the HP12C Financial Calculator app
The calculator app provides business and financial functions used to calculate loan payments, interest rates
and conversions, standard deviation, percent, cash flows, bonds, and more.
TIP: Turn your device to landscape view to display the full set of calculator functions. The portrait view
offers a simple set of functions.
To use the calculator, follow these steps:
2. Tap HP 12C Financial Calculator for X3.
To access the calculator user guide and helpful shortcuts, tap the MENU button in the bottom-left corner of
the calculator app screen. Your device must be in landscape view.
31

11 Entertainment features
Use your HP device for work or play to meet with others via the camera, mix audio and video, or connect
external devices like speakers. See Components on page 4 to locate the audio, video, and camera features on
your device.
Using the camera
Your device has a camera that allows you to video chat, record video, and take pictures.
▲
To access the camera, tap on the Start screen.
NOTE: To access the camera from the lock screen:
▲
Tap and hold from the lock screen.
32 Chapter 11 Entertainment features

(1) View photos Tap to view photos taken. This icon changes to the most
recently taken photo.
(2) Switch cameras Tap to switch to the front camera. Tap the icon again to
return to the back camera.
Using the camera 33

(3) Flash Tap to change the flash settings.
(4) HDR Tap to access the High Dynamic Range (HDR) camera
setting. When the HDR setting is on, the camera takes
several photos at different exposures to create a finished
picture that uses a balance of these photos. The finished
picture will be the most focused, well-lit, and colorful parts
of the photos.
(5) Options Tap to access additional options. These include settings for
white balance (WB), auto-focus, ISO, shutter, and
brightness.
When video mode is enabled, you can also access the
flashlight option.
(6) Settings Tap to select different lenses, set the photo timer, set the
number of photos and exposure for HDR pictures, and
further customize your photos and videos.
(8) Camera Tap to take a picture.
(7) Video Tap to switch to video mode. Tap again to record a video. To
stop recording, tap again.
(8) Camera Tap to take a picture.
(9) Panorama Tap to select panoramic mode. Tap the icon again to start
the picture. Follow the on-screen instructions to continue.
NOTE: For additional camera information, see the Get Started app; this app requires an Internet connection.
Swipe left from the right edge of the Start screen to display all apps, and then tap Get Started. Tap , tap
Browse topics, and then tap Photos.
Using audio
You can download and listen to music, stream audio content (including radio) from the web, record audio, or
mix audio and video to create multimedia. To enhance your listening enjoyment, attach headphones or
speakers.
Connecting speakers
You can attach wired speakers to your device by connecting them to the audio-out (headphone)/audio-in
(microphone) combo jack on your device or to a port on a desk dock.
To connect wireless speakers to your device, follow the device manufacturer's instructions. Before connecting
speakers, lower the volume setting.

Connecting headphones
WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones,
earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental
Notices.
2.
Tap HP Device Hub, and then tap User Guide.
3. Select your language if prompted to do so.
4. Tap Regulatory, Safety and Environmental Notices.
You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in
(microphone) combo jack on your device.
To connect wireless headphones to your device, follow the headphone manufacturer's instructions.
Connecting headsets
WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones,
earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental
Notices.
2.
3. Select your language if prompted to do so.
4. Tap Regulatory, Safety and Environmental Notices.
Headphones combined with a microphone are called headsets. Select products include a headset with the
device. You can connect wired headsets to the audio-out (headphone)/audio-in (microphone) combo jack on
your device.
To connect wireless headsets to your device, follow the instructions provided with the headset.
Changing the volume
Use the external volume buttons to adjust the volume. For the location of the buttons, see Front on page 5.
To change the volume for the ringer and notifications:
1. Press a volume button to display the volume status bar.
2. Use the slider on the volume status bar or use volume buttons to change the volume.
Using audio 35

To change the volume for media and apps:
1. Press a volume button to display the volume status bar.
2. Tap V.
3. Use the slider on the volume status bar or use volume buttons to change the volume.
For additional information about audio, see the Get Started app; this app requires an Internet connection.
Swipe left from the right edge of the Start screen to display all apps, and then tap Get Started. Tap , tap
Browse topics, and then tap Make it yours.
Using sound settings
Use sound settings to change system sounds.
To view or change sound settings:
2. Tap Personalization, and then tap Sounds.

12 Power management
Turning off the device
The turn off procedure closes all open programs, including the operating system, and then turns off the
display and device.
Turn off the device when it will be unused and disconnected from external power for an extended period.
1. Save your work and close all open programs.
2. Press and hold the power button until the slide down to power off message appears. Release the power
button, and then swipe down on the screen to turn off the device.
If the device is unresponsive and you are unable to use the preceding procedure, try the following emergency
procedures in the sequence provided:
● Press and hold the power button for at least 5 seconds.
● Disconnect the device from external power.
Setting power options
Using power-saving states
Initiating and exiting screen off
When the device is on, you can turn the screen off by briefly pressing the power button.
To turn the screen back on, briefly press the power button.
When the screen turns back on, the lock screen appears. Swipe up from the middle of the screen to return to
the screen where you stopped working.
NOTE: If you have set an unlock PIN, you must enter the PIN before the device will return to the screen.
Using the battery saver
Battery saver allows you to quickly access power settings and view the remaining battery charge.
2. Tap System.
3. Tap Battery.
4. Follow the on-screen instructions to view the remaining battery charge, select battery use settings, or
select battery saver settings.
Using battery power
The device runs on battery power whenever it is not plugged into external AC power. Battery life varies,
depending on power management settings, running programs, display brightness, external devices
connected to the device, and other factors.
Turning off the device 37

Displaying the remaining battery charge
The power meter icon at the top right corner of the screen provides a visual representation of the
remaining battery charge.
To display more specific details on the percentage and estimated battery time available, use the battery
saver. See Using the battery saver on page 37.
Maximizing battery discharge time
Battery discharge time varies depending on features you use while on battery power. Maximum discharge
time gradually decreases as the battery storage capacity naturally degrades.
Tips for maximizing battery discharge time:
● Turn on the battery saver. Swipe down from the top of the screen, tap Expand, and then tap Battery
saver. The battery level icon at the top right of the screen changes to show the battery saver icon. For
information about additional battery saver settings, see Using the battery saver on page 37.
● Lower the brightness on the display.
● Turn off any wireless options you are not using, such as Bluetooth.
Managing low battery levels
The information in this section describes the alerts and system responses set at the factory.
Identifying low battery levels
When a battery that is the sole power source for the device reaches a low or critical battery level, the battery
icon shows a low or critical battery notification.
Resolving a low battery level
Resolving a low battery level when external power is available
▲ Connect one of the following devices:
● AC adapter
● Optional desk dock, see Expanding the display on page 12
● Optional wireless charging pad, see Using wireless charging on page 39
● Optional power adapter purchased as an accessory from HP
Resolving a low battery level when no power source is available
To resolve a low battery level when no power source is available, save your work and then turn off the device.
Conserving battery power
● Select the battery saver, see Using the battery saver on page 37.
● Turn off wireless connections when you are not using them.
● Disconnect unused external devices that are not plugged into an external power source.
● Stop, disable, or remove any external memory cards that you are not using.
38 Chapter 12 Power management

● Decrease screen brightness.
● Before you leave your work, lock the device, or turn off the device.
Disposing of a battery
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external
contacts; do not dispose of in fire or water.
See the Regulatory, Safety and Environmental Notices for proper battery disposal.
2.
3. Select your language if prompted to do so, and then tap Regulatory, Safety and Environmental
Notices.
Using wireless charging
NOTE: For more information about the wireless charging pad, refer to the documentation provided with it.
Using the wireless charging pad (purchased separately), you can charge your device by placing the wireless
charging area of your device on the pad.
Using external AC power
WARNING! To reduce potential safety issues, use only the AC adapter provided with the device, an optional
desk dock, an optional wireless charger, a replacement AC adapter provided by HP, or a compatible AC adapter
purchased from HP.
NOTE: For information on connecting to AC power, see the Quick Start guide provided in the device box.
External AC power is supplied through an approved AC adapter, an optional desk dock, or an optional wireless
charger.
Setting power options 39

Connect the device to external AC power under any of the following conditions:
● When charging the battery
● When installing or modifying system software
● When performing a backup or recovery
When you connect the device to external AC power, the following events occur:
● The battery begins to charge.
● The device turns on.
● The power meter icon in the status area changes appearance.
When you disconnect external AC power, the following events occur:
● The device switches to battery power.
● The power meter icon in the status area changes appearance.
Testing an AC adapter
Test the AC adapter if the device does not turn on when it is connected to AC power.
To test the AC adapter:
1. Connect the AC adapter to the device, and then plug it into an AC outlet.
2. Monitor the device for one of the following statuses:
● If the power status light turns on, the AC adapter is working properly.
● If the device turns on, the AC adapter is working properly.
● If the power light remains off and the device remains off, the AC adapter is not functioning and
should be replaced.
Contact support for information on obtaining a replacement AC power adapter.
40 Chapter 12 Power management

13 Sharing and backing up your data
HP strongly encourages you to periodically back up the personal data on your device. You have several
options available, including OneDrive and microSD memory cards. These options also allow you to share your
data with others.
Using OneDrive
Use OneDrive to back up and store documents, photos, and videos. You can share these with other devices. In
addition, you can restore your files from OneDrive back to your device.
NOTE: OneDrive requires a Microsoft account. See Using a Microsoft account on page 45.
2. Tap OneDrive.
Using a microSD memory card
Optional microSD memory cards provide secure data storage for backups and convenient data sharing.
Your device has read/write support for microSD memory cards up to 2 TB.
NOTE: Select devices also support a second nano SIM card. See Installing nano SIM cards on page 10 for
more information. You cannot use a second nano SIM card at the same time you use a microSD memory card.
Only one card can be installed in the second compartment at a time. You can switch the cards.
Inserting a microSD memory card
IMPORTANT: The top side of the card tray may include “UP” and/or “1” and “2” marks that must face up
when you install the cards and insert the tray. Before inserting the tray into the device, position the device
with the screen facing up, and be sure that the marks on the tray are facing up. Do not use force to remove or
replace the tray.
NOTE: You can insert or remove a microSD memory card without turning off your device.
NOTE: If you installed two nano SIM cards, remove the SIM card in slot 2 before installing a microSD memory
card.
To insert a microSD card, follow these steps:
1. Place your fingernail in the small recess on the bottom of the card tray, and then pull out the tray (1) to
remove it from the device.
NOTE: The microSD memory card in your device may look different from the illustration in this section.
Using OneDrive 41

2. Insert a microSD memory card (2) in slot 2, and then replace the card tray (3) in the device.
Using Storage
You can use a microSD memory card to back up and restore your data in case of loss. You can also move files,
pictures, videos, or apps to the card to free up device memory.
To set storage preferences, back up or restore your data, or move device data to a microSD memory card:
2.
Tap Storage.
Determining storage space
The HP Device Hub app provides information about how much storage space is available on the device. To
access that information:
2.
Tap HP Device Hub.
The available space is displayed in the Device Summary.
Using Backup
The Backup option provides a way to back up content such as settings, texts, contacts, accounts, and
passwords. In addition, you can schedule automatic backups and select which apps to back up.
NOTE: Backup requires a Microsoft account. See Using a Microsoft account on page 45.
42 Chapter 13 Sharing and backing up your data

To use Backup:
2. Tap Update & security.
3. Tap Backup, and then follow the on-screen instructions.
NOTE: If a downloaded app is not included in the backup, you can re-download the app from the Store, if the
app is still available. See Adding apps on page 28.
Restoring or resetting your device
IMPORTANT: Make sure you remember your Microsoft account information. You will need that if you want to
restore your device after you reset it. For information about creating a Microsoft account, see Using a
Microsoft account on page 45.
NOTE: Be sure to back up any data you want to save before resetting your device. Resetting restores the
device’s factory settings and erases all of your personal content. You can restore your backed up data after
signing in to your Microsoft account.
To reset all settings and delete all data on the device follow these steps:
1. Swipe down from the top of the screen, and then tap All settings, and then tap System.
2. Tap About, and then tap Reset your phone.
Restoring or resetting your device 43

14 Security
There are several options for securely unlocking your device. After an unlock PIN is set, you can also set up
access using Windows Hello and the iris camera or the fingerprint reader. For the location of the iris camera or
fingerprint reader, see Components on page 4.
Setting PIN protection
To set the device to prompt for a PIN on the lock screen, follow these steps:
2. Tap Personalization.
3. Tap Lock screen.
4. Tap Sign-in options.
5. Follow the on-screen instructions to set a PIN.
Using Windows Hello
On products equipped with a fingerprint reader or an iris camera, you can use Windows Hello to sign in by
swiping your finger or looking at the camera.
NOTE: Additional software may be required to use the fingerprint reader. For more information, go to
http://www.hp.com/support.
NOTE: Before you use Windows Hello, you must set an unlock PIN.
To set up Windows Hello, follow these steps:
2. Tap Accounts.
3. Tap Sign-in options, and then follow the on-screen instructions to enroll your fingerprint or iris.
For additional information about Windows Hello, see the Get Started app; this app requires an Internet
connection. Swipe left from the right edge of the Start screen to display all apps, and then tap Get Started.
Tap , tap Browse topics, and then tap Windows Hello.
Setting double-tap-to-wake feature
The double-tap-to-wake feature allows you to view your locked screen for updates and alerts without
pressing the power button.
2. Tap Extras.
3. Tap Double Tap, and then follow the on-screen instructions.
44 Chapter 14 Security

Using a Microsoft account
If you already have a Microsoft account, you do not have to create a new one. You can sign in using that user
name and password. You will need a Microsoft account to create backups and to restore your device after you
reset it. To create a Microsoft account using your device, use the following steps:
2. Tap Accounts, and then tap Email & app accounts.
3. Tap Add an account.
Locking and unlocking the screen
Locking the screen
To lock the screen, press the power button. See Front on page 5 for the location of the power button.
Unlocking the screen
NOTE: If you turned on the double-tap-to-wake setting, you can double tap the screen instead of pressing
the power button.
To unlock the screen, press the power button. See Front on page 5 for the location of the power button.
If you have set authentication using a PIN, fingerprint reader, or iris scan, you will be prompted for that. See
Using Windows Hello on page 44 for information about setting up a fingerprint reader lock or iris recognition.
Using HP Display Tools to protect your screen
Use the HP Display Tools app to customize display settings when your device is docked. You can set the
amount of time before the screen dims and set the time to wait before the screen locks.
To change the settings, follow these steps:
2. Tap HP Display Tools, and then follow the on-screen instructions.
Using a Microsoft account 45

15 Maintenance
It is important to perform regular maintenance to keep your device in optimal condition. This chapter provides
instructions for updating the operating system and apps, steps to clean the device, and tips for shipping the
device.
Displaying system information
HP Device Hub provides a quick path to the device summary information such as the operating system
version, the amount of available storage space, the product model number, and the mobile IMEI number.
To access HP Device Hub:
2.
Tap HP Device Hub.
Updating the operating system and apps
HP recommends that you update your operating system and apps on a regular basis. Updates can resolve
issues and bring new features and options to your device.
Go to http://www.hp.com/support to check for the latest product information and user guides.
Updating the operating system
NOTE: Before updating, connect your device to AC power or make sure your device is fully charged.
1.
Swipe up from the middle of the Start screen, and then tap HP Device Hub.
2. Tap Update to the latest OS, and then follow the on-screen instructions to check for updates.
Updating apps
1. Tap Store on the Start screen.
2. Tap , and then tap Downloads and updates.
3. Tap Check for updates, and then follow the on-screen instructions.
Diagnostics
The HP Mobile Hardware Diagnostic app provides a way to test the hardware components and memory on
your device to verify they are functioning properly. Alerts providing recovery information are displayed for
any disabled item. Follow the alert details to resolve any issues.
46 Chapter 15 Maintenance

To access diagnostics:
2.
Tap HP Device Hub.
3. Tap HP Mobile Hardware Diagnostics, and then follow the on-screen instructions.
Cleaning your device
Use the following products to safely clean your device:
● Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example, disposable
wipes, which come in a variety of brands)
● Alcohol-free glass-cleaning fluid
● Solution of water and mild soap
● Dry microfiber cleaning cloth or a chamois (static-free cloth without oil)
● Static-free cloth wipes
CAUTION: Avoid strong cleaning solvents that can permanently damage your device. If you are not sure that
a cleaning product is safe for your device, check the product contents to make sure that ingredients such as
alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product.
Fibrous materials, such as paper towels, can scratch the device. Over time, dirt particles and cleaning agents
can get trapped in the scratches.
Cleaning procedures
Follow the procedures in this section to safely clean your device.
WARNING! To prevent electric shock or damage to components, do not attempt to clean your device while it
is on.
1. Turn off the device.
2. Disconnect AC power.
3. Disconnect all powered external devices.
CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on
any device surface. Liquids dripped on the surface can permanently damage internal components.
Cleaning the display
Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner.
Cleaning the sides
To clean the sides, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed
previously, or use an acceptable disposable wipe.
NOTE: When cleaning the device, use a circular motion to aid in removing dirt and debris.
Cleaning your device 47

Shipping your device
If you have to ship your device, follow these tips to keep your equipment safe.
● Prepare the device for shipping:
— Back up your information to an external card or OneDrive.
— Remove all external media cards, such as memory cards.
— Turn off and then disconnect all external devices.
— Turn off the device.
● When traveling by air, carry the device as hand luggage; do not check it in with the rest of your luggage.
● If you plan to use the device during a flight, listen for the in-flight announcement that tells you when you
are allowed to use your device. In-flight use is at the discretion of the airline.
● If you are shipping the device, use suitable protective packaging and label the package “FRAGILE.”
● The use of wireless devices may be restricted in some environments. Such restrictions may apply aboard
aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that
applies to the use of a wireless device in your device, ask for authorization to use your device before you
turn it on.
● If you are traveling internationally, follow these suggestions:
— Check the computer-related customs regulations for each country or region on your itinerary.
— Check the power cord and adapter requirements for each location in which you plan to use the
device. Voltage, frequency, and plug configurations vary.
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt
to power the device with a voltage converter kit sold for appliances.
48 Chapter 15 Maintenance

16 Accessibility
HP designs, produces, and markets products and services that can be used by everyone, including people with
disabilities, either on a stand-alone basis or with appropriate assistive devices.
Supported assistive technologies
HP products support a wide variety of operating system assistive technologies and can be configured to work
with additional assistive technologies. Use the Search feature on your device to locate more information
about assistive features.
NOTE: For additional information about a particular assistive technology product, contact customer support
for that product.
Contacting support
We are constantly refining the accessibility of our products and services and welcome feedback from users. If
you have an issue with a product or would like to tell us about accessibility features that have helped you,
please contact us at +1 (888) 259-5707, Monday through Friday, 6 a.m. to 9 p.m. North American Mountain
Time. If you are deaf or hard-of-hearing and use TRS/VRS/WebCapTel, contact us if you require technical
support or have accessibility questions by calling +1 (877) 656-7058, Monday through Friday, 6 a.m. to 9 p.m.
North American Mountain Time.
NOTE: Support is in English only.
Supported assistive technologies 49

Index
A
AC adapter, testing 40
accessibility 49
ambient light sensor, identifying 6
audio-out (headphone)/audio-in
(microphone) combo jack
identifying 6
B
back key 24
backup 41
battery
conserving power 38
discharging 38
displaying remaining charge 38
disposing 39
low battery levels 38
battery power 37
battery saver 37
Bluetooth device 19, 20
Bluetooth label 10
bottom 10
button
power 6
volume down 7
volume up 7
C
camera 34
flash 34
HDR mode 34
identifying 9
options 34
panoramic mode 34
settings 34
switching 33
using 32
video mode 34
viewing photos 33
camera options 34
camera, accessing from lock screen
32
camera, identifying 6
cameras, identifying 6
caring for your device 47
cleaning your device 47
components
back 8
front 5
connecting to a WLAN 19
conservation, power 38
Continuum 12
corporate WLAN connection 19
D
desk dock 12
desk dock, connecting 16
device, connecting 15
diagnostics 46
double-tap-to-wake feature,
setting 44
E
earpiece, identifying 6
external AC power, using 39
F
factory data reset 41
fingerprint reader, identifying 9
fingerprints, registering 44
flash settings 34
flashlight
identifying 9
G
gestures
using 22
H
HDR settings 34
headphones, connecting 35
headsets, connecting 35
high-definition devices, connecting
17
HP Display Tools 45
HP Mobile Hardware Diagnostics 46
HP resources 2
HP Workspace app 18
I
internal microphone, identifying 7,
9
Iris camera, identifying 6
iris scan, registering 44
J
jacks
audio-out (headphone)/audio-in
(microphone) combo 6
K
keyboard and mouse
using 23
keyboard, on-screen 24
L
labels
Bluetooth 10
regulatory 10
serial number 10
service 10
wireless certification 10
WLAN 10
lights
status 6
Limited Warranty, accessing 2
locating information
hardware 4
help 4
software 4
lock screen
accessing search 4
accessing the camera 32
low battery level 38
M
maintenance
tasks 46
updating the operating system
and apps 46
microSD card reader, identifying 7
microSD card size 7
50 Index

microSD memory card
inserting 41
supported formats 41
Microsoft account, creating 45
Miracast 17
N
nano SIM card
installing 10
navigation bar 24
NFC
using 21
NFC tapping area, identifying 9
O
one-finger slide touch screen
gesture 23
OneDrive 41
P
panorama settings 34
photos, viewing 33
PIN, setting 44
Pogo pin connector, identifying 9
ports
Miracast 17
USB Type-C charging 7
power
battery 37
conserving 38
options 37
power button, identifying 6
power off the device 37
power-saving states 37
product name and number, device
10
public WLAN connection 19
R
regulatory information
regulatory label 10
wireless certification labels 10
Regulatory, Safety and
Environmental Notices, accessing
2
reset 43
S
Safety & Comfort Guide, accessing 2
screen
locking 45
protecting 45
unlocking 45
screen off
exiting 37
initiating 37
screen, turning on 24
search key 24
search, accessing from lock screen
4
searching 4
security 44
serial number 10
serial number, device 10
service labels, locating 10
setting PIN protection 44
setting power options 37
settings, camera 34
shipping the device 48
shutdown 37
sign-in options 44
SIM card
inserting 7
removing 7
SIM card slot, identifying 7
SIM cards, installing 10
slots
microSD card reader 7
SIM card 7
sound settings, using 36
speakers
connecting 34
speakers, identifying 7
status bar 25
status light 6
switch apps 13
switch cameras 33
T
tap screen gesture 22
testing an AC adapter 40
texting 27
touch gestures
swipe 22
tap 22
two-finger pinch zoom 23
touch screen gestures
one-finger slide 23
traveling with the device 10
turning off the device 37
two-finger pinch zoom touch screen
gesture 23
U
unresponsive system 37
updating the operating system and
apps 46
USB Type-C charging port,
identifying 7
using
external AC power 39
power-saving states 37
using gestures 22
using sound settings 36
using the keyboard and mouse 23
V
video settings 34
voice calling 27
volume button, identifying 7
W
window, closing on external display
13
Windows Hello
using 44
Windows key 24
wireless antennas, identifying 8
wireless certification label 10
wireless charging area, identifying
9
wireless controls
operating system 19
wireless network (WLAN)
connecting 19
corporate WLAN connection 19
functional range 20
public WLAN connection 19
WLAN antennas, identifying 8
WLAN device 10
WLAN label 10
WWAN antennas, identifying 8
WWAN device 19
Index 51

HP Elite x3 Manual / User Guide

More Related Content

What's hot (8)

Similar to HP Elite x3 Manual / User Guide (20)

Recently uploaded (6)

HP Elite x3 Manual / User Guide