HP server RAID CONFIGURATION presentation
- 2. THIS TOPIC DESCRIBES HOW TO USE ILO TO CREATE AND CONFIGURE A LOGICAL RAID DRIVE
- 3. RAID – or Redundant Array of Independent Disks – is a type of storage that writes data across multiple drives within the same system. Different configurations are expressed as numbers, such as RAID 0, RAID 1, or RAID 5.
- 4. login hp server tool ilo REMOTE CONSOLE AND MEDIA ILO Intelligent Provisioning SMART STORAGE ADMINISTRATOR HPE Smart Array P408i-p Create Array Physical Drives Finishand perform a powerreset
- 5. login hp server tool ilo
- 6. REMOTE CONSOLE AND MEDIA ILO
- 7. While the system is booting, pressF10to access the Intelligent Provisioning.When login to the Intelligent Provisioning first time, the First time setup wizard will take to the first time configurations
- 8. Select SMART STORAGE ADMINISTRATOR
- 9. Select the HPE Smart Array P408i-p SR Gen 10 controller where the Hypervisor boot SSDs are connected
- 10. Create Array
- 11. Select theTHREE Physical Drivesand click Create Array
- 12. Yesto confirm the changes
- 13. Once you confirm the changes, system will take you to the next logical drive creation page. Select the values as shown in the below diagram and click Create Logical Drive
- 14. ClickFinishand perform a powerreset
- 15. HERE YOU SEE THE CONFIGAREATION