Interwrite workspace

Getting Started InterwriteTM Panel 1

GE T TING STARTED

Interwrite TM Panel

for Windows and the Mac

2 InterwriteTM Panel Getting Started

We at Interwrite LearningTM are proud of our family of Inter-
write products. We strive to continue to bring you the best
the technology has to offer. We urge you to visit our Web
site, where we will post the latest information regarding any
updates and changes we have made that would impact the
instructions in this Getting Started document.
www.InterwriteLearning.com
Click on any of the Interwrite Learning products to access
product information, software downloads, documentation,
and training information.

Please recycle


Table of Contents
Interwrite Panel – Product Overview
About This Guide 5
About Interactive Mode 5
Installation Overview
1. Unpack Your Interwrite Panel 6
2. Assemble the Interwrite Pens 6
3. Install the Interwrite Workspace Software 6
4. Setup and Connect Your Interwrite Panel 6
5. Calibrate the Interwrite Panel Screen 6
Assemble the Interwrite Pens
Replace the Pen Battery 7
Turning the Pen On and Off 7
Install the Interwrite Workspace Software
Installing the Interwrite Workspace Software on Windows 8
Installing the Interwrite Workspace Software on the Mac 9
Setup and Connect Your Interwrite Panel
Tilt Stand Setup 10
Connecting the Interwrite Panel 11
The Interwrite Panel Control Panel 13
Calibrating the Screen 14
Troubleshooting Your Interwrite Panel 15


Getting Started with Interwrite Workspace
Begin an Interwrite Workspace Session 17
The Interwrite Workspace Toolbar 18
Pen Selection from the Toolbar 19
Presentation Files 20
Distributing Presentation Files 21
Additional Interwrite Learning Resources 21
What is PRS? 21
Regulatory Statements and Warranty
Regulatory Statements 22
Warranty 25
Appendices
Appendix A – Display Control 26
Appendix B – Specifications 30


InterwriteTM Panel
Product Overview
The Interwrite Panel is an LCD tablet. The electronic Interwrite Pen controls
the cursor and writes and draws directly on the Interwrite Panel screen.
When used in conjunction with a video projector, the Interwrite Panel’s
screen image displays onto an InterwriteTM Board, a standard whiteboard, or
any projection surface, and the interaction with the desktop can be seen by
everyone in the room. This addition to the Interwrite family of products,
which includes InterwriteTM Boards and InterwriteTM Pads, expands the
interactive opportunities of the Interwrite system for both the class room
and the board room.
About This Guide
This Getting Started Guide describes how to assemble the Interwrite Pen,
install the Interwrite Workspace software, set up and connect the Interwrite
Panel, and calibrate the Interwrite Panel. It ends with a brief overview of the
Interwrite Workspace software.
About Interactive Mode
Interactive Mode is the operational mode of the Interwrite Workspace
software that allows you to take advantage of the full power and robust
features of the Interwrite system. The Interwrite Panel is an input device to
the computer, similar to the Interwrite Boards and Interwrite Pads. It allows
you to annotate captured screen images and a variety of page types in
Annotation Mode, and to run applications and browse the Internet in
Mouse Mode. Everything done on the Interwrite Panel screen can be seen
on the projection surface, via an attached video projector. Anyone at the
Interwrite Board, or using an Interwrite Pad can interact with the presenta-
tion and participate actively in the collaborative experience.


Installation Overview
This section describes what you will be doing and the order in which you
will be doing it, to facilitate the setup of your Interwrite Panel and Interwrite
Pens and their preparation for use.
1. Unpack Your Interwrite Panel
The package includes the Interwrite Panel and an Accessory Box. The
Accessory Box contains:
VGA Cable
AC Adapter
Power Cable
USB Cable
Audio Cable
2 Interwrite Pens
2 AAA Batteries
Interwrite LearningTM CD
InterwriteTM Panel Getting Started Guide (this booklet)
If any item is missing or damaged, please contact your dealer immediately. A
plastic covering is taped to the Interwrite Panel screen to protect it during
shipping. We recommend you leave the protective plastic in place until you
have completed your Interwrite Panel installation. It is easily removed by
pulling on the tape tabs.
2. Assemble the Interwrite Pens
Each Interwrite Pen is powered by one AAA alkaline battery.
3. Install the Interwrite Workspace Software
4. Setup and Connect Your Interwrite Panel
The Interwrite Panel can be set up as a free-standing monitor on a desk or
table, or it can be installed in a podium. Your Interwrite Panel is connected
to your computer with both the VGA cable and the USB cable. It is con-
nected to a power source with the AC Adapter and Power cable.
5. Calibrate the Interwrite Panel Screen

The Interwrite Pen works best when it is held at a 90° angle to
the Interwrite Panel screen.


Assemble the Interwrite Pens On-Off
The Interwrite Pen is an electronic pen that sends Switch
positional signals to the Interwrite Panel’s electromag-
netic digitizer to control cursor movement. The two
buttons on the black Pen barrel provide additional
mouse-like cursor control. The lower button, the one
closest to the Pen Tip, acts as a double-click when you
press it. The upper button provides right-click capabil-
ity.
Replace Pen Battery
The Interwrite Pen is powered by a single AAA battery.
The following instructions describe how to insert the
batteries that shipped with the Pens.
1 Unscrew the Pen, separating the black end with the
Pen Tip from the silver barrel. If needed, remove
and dispose the old battery.
2 Insert a AAA battery into the silver cradle with the Right-
positive pole (the + end with the protruding button) Click
pointing toward the Pen Tip.
3 When the battery is in place, screw the two Pen Double-
halves back together. Click
Each Interwrite Pen comes with two replacement Pen
Tips. Pull out the used Tip and snap a replacement Tip
into place in the end of the Pen barrel.
Store the Interwrite Pen in the Pen Holder on the back
of the Interwrite Panel. Pen
Turning the Pen On and Off Tip

Press the button on the top of the pen to turn the
Interwrite Pen on and off.


Installing the Interwrite Workspace
Software on Windows
The Interwrite Workspace software must be installed on Windows
by a user with Administrator privileges. Interwrite Workspace is
compatible with Windows 2000, XP, and Vista.

If you are using Windows 98/Me/NT, you must use Interwrite
Workspace version 5.0. For more information, contact Technical
Support to order an installation CD.

1 Log in as Administrator. Insert the Interwrite Learning CD into the
CD drive on your PC. The installer will autoload. If it doesn’t, click
the Start button on the Windows Task Bar and select Run from
the menu. Type X:setup.exe (X represents the CD drive letter).
2 Select the Install Interwrite Workspace Software menu option.
3 Follow the onscreen instructions for the software installation. You
will know Interwrite Workspace has installed successfully by the
appearance of the Interwrite Workspace icon in the System Tray on
the Windows Task Bar. If the icon does not appear, restart your
computer.

The appearance of the Interwrite Workspace icon
on the Task Bar indicates that the InterWrite
Device Manager is now running on your PC.
Click on the Workspace icon to display the op-
tions on the Device Manager Menu shown here.
Device Manager, in addition to managing the
Interwrite hardware devices, provides direct
access to the three operational modes of the
Interwrite Workspace software.

Click the Interwrite Workspace icon in the System Tray of the
Windows Task Bar to display the Device Manager Menu. Select the
Check for Updates option. If a new version of Workspace is available,
download it now. You should periodically check for updates.


Installing the Interwrite Workspace
Software on the Mac
The Interwrite Workspace software must be installed on the Mac by
a user with Admin privileges. Interwrite is compatible with Mac OS X
version 10.4 or higher.

1 Insert the Interwrite Learning CD into the CD-ROM drive on your
Mac. An Interwrite Workspace CD icon will appear on your
desktop.
2 Double-click the Interwrite icon on the desktop to display the
CD’s contents. Double-click the Install Interwrite icon.
3 Follow the onscreen instructions for the software installation.

The appearance of the Interwrite
Workspace icon on the Menubar
indicates that the Device Manager is
now running on your Mac. It will load
and run in the background every time
you start up your Mac. Click on the
Interwrite Workspace icon to display
the options on the Device Manager
Menu, shown here. Device Manager,
in addition to managing the Interwrite
hardware devices, provides direct
access to the two operational modes of
Interwrite Workspace on the Mac.

Click the Interwrite Workspace icon on the Menubar to display
the Device Manager Menu. Select the Check for Updates option. If a
new version of Interwrite Workspace is available, download it now.
You should periodically check for updates.


Set Up and Connect Your Interwrite Panel
Tilt Stand Setup
When you remove the Interwrite Panel from its shipping box, the Tilt
Stand is pointing toward the top of the Interwrite Panel. Pull up on the
Release Lever and swing the Tilt Stand down to its normal operating
position with the buttons on the front of the Interwrite Panel located at
the top of the monitor and the Interwrite Panel logo at the bottom. Use
the Release Lever to adjust the Tilt Stand to the tilt position you prefer.

Release Lever

Pen Holder

Tilt Stand
Assembly

Tilt Stand


Connecting the Interwrite Panel
Familiarize yourself with the connectors on the back of the Interwrite Panel
and refer to the graphic here.
1 Power off your computer.
2 Plug the power cord into the AC Adapter. Plug the AC Adapter into the DC
Jack power connector on the Interwrite Panel. Plug the power cord into a
standard 110V socket.

If you want to use the Video Out capability of the Interwrite Panel,
you must use the VGA connection.

3 Plug one end of the 15-pin VGA cable into the VGA IN connector on the
Interwrite Panel. Plug the other end of the VGA cable into the VGA port
on the back of your computer. Secure both connectors by tightening the
screws on either side of the connector plug.
4 If you want to connect your projector or another monitor to the
Interwrite Panel, plug the VGA Cable from the video projector or the
monitor into the VGA OUT connector.
5 To connect outside speakers to the monitor, plug the speaker cable into
the Speaker OUT connector.

USB Port
Speaker OUT
VGA IN

VGA OUT to projector

DC Jack


5 Plug one end of the USB cable into the USB port on the Interwrite Panel.
Plug the other end into one of the USB ports on your computer or
USB hub. The operating system will auto-detect and configure the new
hardware device.

The VGA connection establishes your Interwrite Panel as a monitor. The
USB connection allows the Interwrite Workspace software to recognize
the Interwrite Panel as a digitizer.

6 Power on your computer.

7 Turn on your Interwrite Panel by pressing the Power button located on
the front of the monitor.

Power LED


The Interwrite Panel Control Panel
The Control Panel is located at the top of the Interwrite Panel in the left
corner on the front of the monitor. It consists of control keys that, in addi-
tion to powering the Interwrite Panel on and off, are used to interact with
the OnScreen Display, or OSD. The control keys include: the Left Arrow
key, the Right Arrow key, the Menu key, the Auto Select key, and the Power
key.
Power
The Power key turns the Interwrite Panel On and Off. The LED indicator at
the far right end of the Control Panel will appear orange when the Interwrite
Panel has no signal or is in Standby Mode. When the Interwrite Panel is in
Working Mode, the LED will appear green. There will be no color when the
power is off.
Menu
Press the Menu key to display the OSD menu. The OSD menu provides
options for controlling Brightness, Contrast, Picture Alignment, etc. (See
Appendix A for details.) When the OSD menu is active, the Menu key
functions as the Confirm key for each action.
Left and Right Arrow
When the OSD menu is active, the left arrow key moves the selector to
the left. When the OSD menu is off, the right arrow is used to change
input between channel 1 and channel 2. When the OSD menu is active, the
right arrow key moves the selector to the right.
Auto Select
Press the Auto Select key to reset the Interwrite Panel to factory default
settings. When the OnScreen Display menu is active, use the Auto Select
key to close the OSD menu.
Control Panel

Menu Auto Left Right Power
Select Arrow Arrow


Calibrating the Screen
If the tip of the Interwrite Pen does not line up with the cursor on the
Interwrite Panel screen, you can calibrate the Interwrite Panel to ensure pen
tip/cursor alignment.

Windows
1 Click on the Interwrite Workspace icon in the System Tray on the
Windows Task Bar to display the Device Manager menu.
2 Select the Devices option from the menu.
3 Select the Interwrite Panel from the list of Recognized Devices and click
on the Properties button.
4 Click on the Calibrate button.

Mac
1 Click on the Interwrite Workspace icon on the Menubar to display
the Device Manager menu.
2 Select the Calibrate... menu option.

Windows and Mac
A bright blue screen with a white calibration point in the upper left corner
will appear on the Interwrite Panel.
1 Using the Interwrite Pen, click on each calibration point as it appears in
each of the four corners of the screen.
When calibration is completed, the blue screen will disappear. You should
only have to calibrate the Interwrite Panel once.


Troubleshooting Your Interwrite Panel
Device Manager is a component of the Interwrite Workspace software you
installed. Its function is to manage the Interwrite hardware devices (Inter-
write Boards, Interwrite Pads, and the Interwrite Panel) and their connections
to the computer and to the Interwrite Workspace software. When an
Interwrite hardware device, such as the Interwrite Panel, is properly con-
nected, it will show up in the Devices dialog, selected from the Device
Manager menu. To access the menu, click on the Interwrite Workspace icon
(in the System Tray on the Windows Task Bar, or on the Mac Menubar).
If the Interwrite Panel is not working correctly, check the following:

If the LED is neither orange nor green, the Interwrite Panel is not
powered on. Press the Power button on the Interwrite Panel Control
Panel. If the LED does not light up, check your power connections at the
DC Jack on the back of the Interwrite Panel, the AC Adapter and the wall
plug or power strip.

If there is power, but no picture, check the VGA cable connections (or
DVI connections, if you are not using VGA) at the back of the Interwrite
Panel (VGA IN) and on the computer.

If the Interwrite Panel does not show up in Device Manager’s Devices list,
verify that the USB cable is properly connected to the USB port on the
back of the Interwrite Panel and to a USB port, or USB hub, on your
computer. Unplug the USB cable from the USB port, wait five seconds,
and plug it back in. If you have more than one USB port on your
computer, try plugging the USB cable into a different port.


Getting Started with Interwrite Workspace
The purpose of this document is to give you a feel for the Interwrite system
by showing you how to select and use a tool in Interactive Mode. The
Annotation Tools of Interactive Mode consist of freehand tools, text tools
and drawing tools. Of the freehand tools, the Pen tool is the most frequently
used Interwrite Workspace Tool. The following pages describe how to select
and configure the Pen tool.
The Interwrite system is at the heart of a successful interactive collabora-
tion, whether it is in a classroom of fourth graders studying world geogra-
phy, or in a boardroom of corporate executives brainstorming a new prod-
uct launch. All the tools you will need to stimulate inspiration, connection
and participation can be found in the Interwrite Workspace software.
Here’s a quick look at the Workspace basics to get you started.
Workspace Modes
Interwrite Workspace is run in one of three operational modes, Interactive
Mode Office Mode (Windows only), or Whiteboard Mode
Mode, Mode.
Workspace Tools have been categorized as Annotation Tools, Editing Tools,
Page Tools, Presentation Tools, Multimedia Tools, Navigation Tools, File
Management Tools, and Setup Tools. The Interwrite Workspace Help file
describes all these tools in detail and can be accessed from the Device
Manager Menu.
Whiteboard
Whiteboard Mode available only when using an Interwrite Board with
Mode,
Workspace , allows you to capture and preserve notes, drawings, calcula-
tions—whatever you write on the Interwrite Board with an Interwrite Marker
Pen.
Office
Office Mode makes it possible to interact directly with the native files of the
Microsoft Office suite of products, PowerPoint, Word and Excel.
Interactive
Interactive Mode allows you to open and run applications while in Mouse
Mode using the tip of your electronic Interwrite Pen on the Interwrite
Mode,
Panel screen to move the cursor. In Annotation Mode you use the Inter-
Mode,
write Pen to select Interwrite Workspace Tools from the Toolbar.


Begin an Interwrite Workspace Session
1 When you are ready to begin an Interwrite Workspace session, turn on
your Interwrite Panel. The Panel must be active and connected. You can
verify this in Session Manager, or Devices, both Device Manager Menu
options.
2 You can start Workspace in Interactive Mode by using your electronic
Interwrite Pen to click on the Interwrite Workspace icon on the
Windows Task Bar or the Mac’s Menubar to display the Device Manager
Menu. Select Interactive Mode from the menu.
The Workspace Toolbar displays on the screen.

By default, the basic Toolbar is shown
here. A more advanced toobar can be
selected in the Customize Toolbar
Preferences option.


The Interwrite Workspace Toolbar

Minimize Toolbar

Workspace Menu When you start up Interwrite
Workspace in Interactive Mode, the
Mouse Mode tool
Toolbar displays, along the right side
Selection tool of the projected desktop image, At
Pen tool that time, Workspace is in Mouse
Mode.
Highlighter tool
Eraser tool
Use your Interwrite Pen to select the
Shape tool Pen tool from the Toolbar. Select a
capture option from the Capture
Line tool dialog, click on the window, or click
Text tool and drag to capture a portion of the
screen.
Undo Previous Action

Clear
Your capture is displayed in the
Create Blank Page Annotation Window. Or, you can start
Create Grid Page up Annotation Mode by selecting one
of the Page Creation Tools.
Gallery tool
Screen Capture tool
Previous Page When you do that, the page type you
select is displayed in the Annotation
Next Page Window and the Pen tool is automati-
Page Sorter tool cally selected.
Save

Toolbox
Once the Annotation Window is
open, you can begin writing or
PRS tool drawing on the page.
Exit


Using the Pen Tool
The attributes of the Pen tool can be changed by selecting different
options from the Properties Bar at the bottom of the Annotation
Window.
Select the Pen tool’s Down Arrow to display its Tool Settings Menu.
Properties Bar
The Pen tool Properties Bar provides options to change line color,
width, transparency, and line ends and line styles. Each attribute
change is displayed in the Preview Box.

Properties Bar

lo
r
lo
r th cy ds bo
x
es

co co id re
n en
yl

w w
ne
st

ne lin
e
ne s pa Li v ie
Li
h

Li an re
as

e P
ng tr
D

a e
Ch Li
n

Change the Pen tool’s line color and width to determine how it will
affect the look of your annotations. The best way to familiarize your-
self with all the different Interwrite Workspace tools and how they can
be used to enhance your presentations is to experiment with them.

Page Functions
Workspace also provides the ability to move within pages within the
window. Select the functions at the bottom of the screen to pan a page,
move between pages, use the PRS tool (optional), or discard annota-
tions.

Trash

n
tio
( P tion
Pr age
us

es t
ex

a
io

)

oc
N

RS
p
ev

l
n

qu

t
Pa

n
re
rt

r
se

Cu
In


Presentation Files
The presentation file is made up of your annotated pages. The Page
Creation and Capture tools are used to create the pages in the presenta-
tion file and the Annotation Tools are used to create the annotations.
The presentation file is automatically saved as a .GWB file.
As soon as Interwrite Workspace goes into Annotation Mode, an
untitled presentation file is created. Unless you give the file a name, it is
automatically saved using today’s date as the filename. (Multiple files
created today have 01, 02, 03, etc., appended to the date name.)
An existing presentation file can be opened, its pages can be sorted,
annotations can be added to the existing pages, and new pages can be
added to the file. Your presentation will determine how each presentation
file evolves.
For example, you can prepare a presentation file of blank maps ahead of
time for a geography lesson. Or, you can capture and annotate each of
the monthly earnings spreadsheets as you review the past fiscal year
during a budget meeting. Or, you can run a PowerPoint Slide Show in
Office Mode (Windows only) and annotations can be added to each
slide and saved in the native file.
Building the Presentation File
You can build your presentation file during your presentation, or you
can pre-build it, including the screen captures, images, graphs and text
pages you want to present. However you choose to do it, the process is
the same.
To capture a screen or window, click on the Mouse Mode tool with your
Interactive Pen and arrange the desktop for capture. Select an Annota-
tion Tool, the Pen for example, indicate your capture preference (by
Pen,
clicking on either the Partial Window or Screen option in the dialog),
Partial, Window,
and annotate the captured image.
Use the Page Creation Tools to add a blank, gridded, or background
image page. By default, Interwrite Workspace is in Autosave mode, so
your annotated pages are automatically saved as you build your presen-
tation file.
Click the Save tool to save the file using the default filename (current
date), or a name you type on the pop-up Onscreen Keyboard.


Distributing Presentation Files
The Interwrite Workspace presentation files you create can be printed for
local distribution, or emailed to anyone, anywhere.
Use the Page Sorter tool to review the presentation file. The pages in the
presentation file can be sorted, moved, duplicated, merged, and deleted
using the Page Sorter tool. When the file pages have been arranged to your
satisfaction, you can use Page Sorter’s export option to export it to one of a
number of file formats, or you can close Page Sorter and select an option
from the Workspace File Menu.
The native file format of saved presentation files has the .GWB extension.
GWB files can be read on any computer on which Interwrite Workspace is
installed. For general distribution, we recommend exporting the presentation
file to the PDF format using the Export PDF File tool located in the Toolbox,
or by selecting the the Export PDF File option from the Workspace File
Menu.
Now everyone can stay in the information loop, whether they were able to
attend the presentation or not.

Additional Interwrite Learning Resources
We invite you to visit the Interwrite Learning Web site at
where we have provided a variety of resources to help make your Interwrite
Workspace experience more rewarding. We especially encourage you to
visit
www.InterwriteLearning.com/support_interwrite.htm
and
www.InterwriteLearning.com/erc/index.htm.
www.InterwriteLearning.com/erc/index.htm
What is PRS?
Interwrite PRS is an Audience Response System—a comprehensive response
system for electronically testing, polling, and surveying a group of people. It
can be used in conjunction with Interwrite Workspace to take a survey of
the audience response to the presentation, or to test the level of compre-
hension after a lesson presentation, for example. Learn more about PRS by
visiting our Web site.


Regulatory Statements
These devices comply with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1 These devices may not cause harmful interference, and
2 These devices must accept any interference received, including
interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee the interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced Radio/TV technician for help.
The radiated output power is far below the FCC Radio Frequency exposure
limits. Nevertheless, each of the devices should be used in such a manner
that the potential for human contact during normal operation is minimized.

Japan


Declaration of Conformity
The “CE“ mark on this device indicates compliance under the EMC 89//
336/EEC Directive.
Declaration of conformity according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Coretronic Corporation
for GTCO Corp. (dba Interwrite Learning)
Manufacturer’s Address: No. 2, Ke Bei Road 5th
Science Park
Chu-Nan 350, Miao-Li County, Taiwan
declares, that the product is herewith confirmed to comply with the
requirements set out in the Council Directive on the Approximation of
the Laws of the Member States relating to Electromagnetic Compatibility
(2004/108/EC), Low-voltage Directive (2006/95/EC). For the evaluation
regarding the Directives, the following standards were applied:
Product Name: LCD Monitor
Brand Name: Interwrite Panel
Model Number: PI-770
Product Options: All
conforms to the following product specifications:
Emission: EN55022:1998+A1:2000+A2:2003, Class B
EN 61000-3-2: 2000, Class D
EN 61000-3-3: 1995+A1: 2001
EN61000-3-3:1995+A1:2001
EN60950-1:2001+A11
Immunity: EN 55024:1998+A1: 2001+A2: 2003
IEC 61000-4-2:2001
IEC 61000-4-3:2002+A1:2002
IEC 61000-4-4:2004
IEC 61000-4-5:2001
IEC 61000-4-6:2003 +A1:2004
IEC 61000-4-8:2001
IEC 61000-4-11:2004

Person Responsible: Andy Cheng
Position/Title: Senior Manager
Place: Chu-Nan, Taiwan
Date: 2007/9/17


European Union Emission Directive
This product is in conformity with the protection requirements of EU Council
Directive 89/366/ECC on the approximation of the laws of the Member
States relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22/European Standard
EN55022. The limits for Class A equipment were derived for typical industrial
environments to provide reasonable protection against interference with
licensed communication devices.

European Union WEEE Directive
The manufacture of this equipment required the extraction and use of natural
resources. It may contain hazardous substances that could impact health and
the environment.
• In order to avoid the dissemination of the hazardous substances into the
environment and to diminish the pressure on our natural resources, we
encourage you to return this product to the appropriate take-back system
facility. These facilities reuse or recycle most of the materials in this
equipment in a responsible way.
• The crossed-out wheeled bin symbol below invites you to use these take-
back systems.
• If you need more information about the collection, reuse and recycling
systems in your area, please contact your local or regional waste
authority.
• Further information about the responsible end-of-life management of this
and other Interwrite Learning products is available on our Web site at
www.InterwriteLearning.com.

European Contact:
Interwrite Learning
A Division of GTCO CalComp GmbH
European Headquarters
Kreiller Strasse 24
81673 Munich
Germany
Tel: +49 (0) 89 370012-0
Fax: +49 (0) 89 370012-12


Limited Warranty for the Interwrite Panel
Interwrite Learning warrants these products to be free from defects in material and workmanship under the following terms. Complete
and return the enclosed warranty registration card to ensure that your products are covered by this warranty.
Coverage
Parts and labor are warranted for one (1) year from the date of the first consumer purchase for the Interwrite Panel, electronic Interwrite Pen, AC
Adapter, and cables. This warranty applies to the original consumer purchaser only only.
Within the European Union, the warranty period is two (2) years, as mandated by the EU. Contact your local dealer or distributor for additional
warranty information.
Warranty is valid only if original consumer’s purchase or lease date is less than or equal to six months from the original Interwrite Learning sale date.
This information will be captured by the system serial number and confirmed by the reseller’s purchase order.
A nominal Warranty Handling Fee will be charged after the first 90 days of use and calculated from the date of original consumer purchase. This
payment may be made by Visa, MasterCard, or American Express. A copy of the sales receipt or invoice will be required for warranty verification.
Conditions
Except as specified below, this warranty covers all defects in material or workmanship in the products. The following are not covered by the
warranty:
1. Any product on which the serial number has been defaced, modified, or removed (if applicable).
2. Damage, deterioration, or malfunction resulting from:
a. Accident, misuse, abuse, neglect, fire, water, lightening, or other acts of nature, unauthorized product modification for any purpose, or
failure to follow instructions supplied with the product.
b. Repair, or attempted repair, by anyone not authorized by Interwrite Learning.
c. Any damage in shipment of the product (claims must be presented to the carrier).
d. Any other cause which does not relate to a manufacturing defect.
3. Any product not sold or leased to a consumer within six months of Interwrite Learning’s original sale date.
4. Consumable parts, e.g., batteries, dry-erase markers, eraser felt.
Interwrite Learning will pay all labor and material expenses for covered items, but will not pay for the following:
1. Removal or installation charges.
2. Costs for initial technical adjustments (set up), including adjustments of user controls.
3. Certain shipping charges. (Payment of shipping charges is discussed in the next section of this warranty.)
4. Packaging costs. (Customers should keep their boxes.)
Warranty Service Procedures
1. To obtain service on your Interwrite Learning product, contact the Technical Support Department to receive a Return Material
Authorization Number (RMA#) and shipping instructions by calling:
In United States: (480) 443-2214 (MST)
In Europe: +49 (0) 89 370012-0 (CET)
2. Ship the product to Interwrite Learning with the RMA# marked clearly on the outside of the box. Interwrite Learning reserves the right to
refuse the shipment, if not properly marked.
3. Although the consumer must pay any shipping charges to ship the product to Interwrite Learning for warranty service, Interwrite Learning
will pay the return shipping charges for ground shipment. Other shipping options are available at an additional fee.
4. Whenever warranty service is required, the original dated sales invoice (or a copy) must be presented as proof of warranty coverage, and
should be included in shipment of the product. In addition, please include your name, address, telephone number, fax number, email
address, and a description of the problem.
5. If Interwrite Learning determines that the unit is not defective within the terms of the warranty, the consumer shall pay the cost of all freight
charges, as well as any repair charges.
Technical Support
Web-based Technical Support is available free of charge at: www.InterwriteLearning.com, where current driver releases, as well as comprehensive
technical support, troubleshooting, Technical Bulletins and FAQs can be found.
Telephone Technical Support is available free of charge to the original consumer for a period of 90 days from the date of purchase of the product.
Please contact our Technical Support Department:
In Europe: +49 (0) 89 370012-0 (CET)
You can also fax your request to:
In Europe: +49 (0) 89 370012-12 (CET)
Our toll-free number in the U.S. is: 800-856-0732 (MST)
Disclaimer of Unstated Warranties
The warranty printed above is the only warranty applicable to this purchase. ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Assuming the warranty above stated is otherwise applicable, it is expressly understood and agreed that Interwrite Learning’s sole liability, whether in
contract, tort, under any warranty, in negligence, or otherwise, shall be for the repair or replacement of the defective parts, and under no
circumstances shall Interwrite Learning be liable for special, indirect, or consequential damages. The price stated and paid for the equipment is a
consideration in limiting Interwrite Learning’s liability.
Notice
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to
you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state, or province to province.
To obtain service on your Interwrite Learning product, call our Technical Support Department at (480) 443-2214 (MST), or fax us at
(480) 948-5508 (MST); in Europe call +49 (0) 89 370012-0 (CET), or fax us at +49 (0) 89 370012-12 (CET).
We can also be contacted through our Web site at www.InterwriteLearning.com (in US), at EUOffice@gtcocalcomp.com (in Germany), or at
infos@calcomp.fr (in France).
Important! All products returned to Interwrite Learning for service must have prior approval in the form of a Return Merchandise Authorization
Number (RMA#), which can be obtained by calling the Technical Support Department.


Appendix A
Display Control
OSD Menu Summary

The On Screen Display (OSD) menu allows you to view and adjust the
settings for the display.

Using the Menu
The following procedure takes you through the steps of accessing the
menu options.
1 Press Menu. The OSD Menu displays.
2 Use the (+) button and (-) button to select a menu item.
3 Press Auto Select to confirm the selection.
4 Use the (+) button and (-) button to adjust the value, and Auto Select
to confirm the value selection.

Closing the Menu
1 Select EXIT from the menu screen. The OSD menu closes.

If the menu closes by not selecting options, the latest settings applied
will take effect when the OSD closes.


Menu Options
The following section describes the OSD menu options available for the
Interwrite Panel.

Brightness/Contrast
Used to adjust screen brightness or contrast (1-100).

LCD Adjustment
Used to adjust screen position.

Option Description
Clock Adjust the screen size

Phase Adjust the timing

H. Position Changes the vertical position

V. Position Changes the horizontal position

Return Returns to the previous page

Color Temperature
Used to adjust screen resolution.


User
Used to adjust the red, green, and blue colors of the screen.

Eco Mode
Used to turn the ECO mode ON, and limit the brightness settings from 0
to 20 to reduce power consumption.

Language
Used to select the display language. The following languages are avail-
able:
• Japanese
• English
• French
• German
• Spanish
• Italian
• Chinese


Other Setup
Used to adjust other display screen settings for the monitor.

Option Description

Smooth Adjust the smoothness of the image (0-3)

OSD H. Adjust the horizontal position of the OSD
Position window (0-100)
OSD V. Adjust the vertical position of the OSD
Position window (0-100)
OSD Used to turn the OSD window background
Transparency transparency on or off

OSD Timeout Used to set the amount of time in seconds befroe the
OSD menu closes automatically (0-60)

Volume Used to adjust the speaker volume (0-100)

Mode Used to turn screen resolution display on or off
Message

Reset Used to reset OSD menu settings to their
default values

Return Used to return to the previous page


Appendix B
LCD Monitor Specifications (17")
Item Specification
Display Driver Type Active Matrix Liquid Crystal Display (TFT)
Display Area 337.92mm (H) x 270.336mm (V)
(17.0 inch diagonal)
Resolution 1280 (H) x 1024 (V) pixels
Pixel Pitch 0.264mm (H) x 0.264 (V)
Support Color 16,200,000 colors
Brightness 220 (cd/m2)
Contrast Ratio 450:1
Viewing Angle -70° ~70° (H), -70° ~70° (V) (Typical)
Digitizer Input System Electromagnetic induction
Backlight Unit 2 replaceable CCFL (w/50,000 hrs. life)
Pen Stylus Pen, 1 AAA alkaline battery:
approximately 1800 hours use
Resolution 0.05 mm

Accuracy ± 0.5mm
Tracking Speed 125 points per second
Interface USB Port 1.1

I/O Input 15-pin D-sub, (Analog RGB)
Connectors Stereo mini-jack (stereo audio)
Output 15-pin D-sub (Analog RGB)

Power Source Input AC100-240V Universal , 50-60 Hz, 1A

Output (DC 12 V, 3.3A)

Speaker Stereo (1W+1 W build-in amplifier

*Specifications are subject to change without notice*


LCD Monitor Specifications (continued)

Item Specification
Environmental Operating 10°C ~ + 35°C (50°F ~ 95°F)

Storage -10°C ~ +60°C (-14°F ~ 140°F)

Humidity: Operating 30-80% (no condensation)

Stoarge 10-80% (no condensation)

Power Operating 40 Watt or less
Consumption
Standby 4 Watt or less

External Dimensions 395.0 (W) x 375.0(H) x 57.0 (D) mm

Weight 5.2 kg

Stand Adjustment 20-70 degrees

Compatible Operating Systems Windows 98/98SE/Me/2000/XP

Display Timing

Model Resolution H-Freq.(KHz) V-Freq.(Hz)
1 VGA 640 * 480 @60Hz 31.47 59.94
2 VGA 640 * 480 @72Hz 37.86 72.81
3 VGA 640 * 480 @75Hz 37.50 75.0
4 SVGA 800 * 600 @60Hz 37.88 60.31
5 SVGA 800 * 600 @72Hz 48.08 72.19
6 SVGA 800 * 600 @75Hz 46.87 75.0
7 XGA 1024 * 768 @60Hz 48.36 60.00
8 XGA 1024 * 768 @70Hz 56.48 70.07
9 XGA 1024 * 768 @75Hz 60.02 75.03
10 SXGA 1280 * 1024 @60Hz 63.98 60.02
11 SXGA 1280 * 1024 @75Hz 79.98 75.05


Corporate Headquarters Western Office
7125 Riverwood Drive 8224 East Evans Road
Columbia, Maryland 21046 Scottsdale, Arizona 85260
Tel: 410.381.6688 Tel: 480.948.6540
Fax: 410.910.0051 Support: 480.443.2214
Sales: 866.496.4949 Fax: 480.948.5508

European Headquarters
Interwrite Learning
A Division of GTCO CalComp GmbH
Kreiller Strasse 24
81673 Munich
Germany
Tel: + 49 (0) 89 370012-0
Fax: + 49 (0) 89 370012-12

Support: 480.443.2214

Copyright© 2007 Interwrite LearningTM
Interwrite Learning and Interwrite are trademarks of GTCO Corp.
Bluetooth is a trademark of, and is owned by, Bluetooth SIG, Inc., U.S.A.,
and is licensed to Interwrite Learning.
All other products and company names are the trademarks or registered
trademarks of their respective owners.
The information contained in this document is subject to change without notice. Interwrite Learning assumes no
responsibility for technical, or editorial errors, or omissions that may appear in this document, or for the use of this
material. Nor does Interwrite Learning make any commitment to update the information contained in this document.
This document contains proprietary information which is protected by copyright. All rights reserved. No part of this
document can be photocopied or reproduced in any form without the prior, written consent of Interwrite Learning.
37-01229-01 Rev. A

Interwrite workspace

More Related Content

Viewers also liked (20)

Similar to Interwrite workspace (11)

Interwrite workspace