Iot Based Society Automation Using GTBS Protocol

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 09 Issue: 03 | Mar 2022 www.irjet.net p-ISSN: 2395-0072
© 2021, IRJET | Impact Factor value: 7.529 | ISO 9001:2008 Certified Journal | Page 84
Iot Based Society Automation Using GTBS Protocol
Krushnachaitanya S. Sargam2, Suchitra S. Mhetre3, Vinay S. Gadade4, Tanuja M. Jawale5
Prof. Ayub Mulani, dept. of Electronics and Telecommunication Engineering, KSE Pune, India
2345 UG Student, dept. of Electronics and Telecommunication Engineering, KSE Pune,India
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract – As we know humans are using technology to
make everything easy, fast with also security. In industry the
use of technology is increasing for various applications, but
very low has beem done towards the society automation. The
automation is technique which gives us numerous benefits
today. Society automation is also one of the use of this
technology. the concept focus on to control and monitor gate
security with home applications. Wireless Sensor
Network(WSN) is widely using for sensing in all type of
automation applications. We are also focusing on concept of
the operation of monitoring and controllinghomeapplications
facilities the information on smart devices in residential
buildings.
Key Words: Iot technology, automation system, sensors,
GTBS, WSN,Android Application.
1. INTRODUCTION
The IOT technique is becoming very popular because
the IoT isa technique where network connectivityiscapable
to connect with objects, Sensors and its also allowingdevices
to communicate with each other for better system. The
greatest advantage of IOT is the process is done with
minimal human interface.
The internet is not a new topic for a world but now a
day’s its very emerging topic. By various articles of internet
and WSN it is proved that the service they gives us is It will
become more easier in future and also it is very helpful for
elder and disabled personal to live and make their life
normal like others.
Buildings consumealmost 70% of the total electricity
generated in the flat Commercial buildings and their shares
of energy of utilizing are project to increase further as
comparing to residential society. The concept is easy but
very important and potentially strong. In starting of 2000’s
Kevin Ashton wrote that the world will fully depend on
Internet of Things (IoT). RFID and sensors technology will
control and monitor daily life world without the limitations
of human-entered data.
Thehomesof 21st century will becomemoresecured
andself controlled withautomation due to thecomfort that
provides by WSNs and IoT. The automation means that
allow user to control Electric appliance and various kind of
home equipment from anywhere.
Objectives
Our aim in this project is to design a Wireless
Sensor Network to establishing a intelligent building. By
using GreenTask Based Scheduling (GTBS) algorithm we
designed to reduce power consumption. This system is to
design to monitor effectively and control electrical
appliances and home equipment using IoT.
Scope
It has been difficult to work manually in feeding
of small parts like dowel pins , small nuts , castle nuts etc.
By providing feeding mechanism it becomes easy to use
by the operator as well as it gives high performing part
feeding mechanism. This automation is beneficial for
industrial sector to achieve lower error rates and less
power consumption, betterprofits, better rate of efficiency
and less dependency of man power.
2. Methodology
In this system using rf modem and WSNs it is
possible to collect and analyzed up to date data faster
accurately and more efficiently. The wireless sensor is
device which identifyand measure the signal or data and
send it to the processor.
Block Diagram
In this system we designed two terminal’s i.e
A] Gate Terminal
The block diagram shows that gate section. The
user has to shows rfid tag to reader the microcontroller
Reads the 10digit number of that card and compares it
with data basestored in internal memory. If password will
match then accesswill granted. The user gets notification
on android application.If does not match the gate remains
close.

Fig -1: Gate Terminal
B] Flat terminal
In this section, we interface various sensors to the
microcontroller via signal conditioning circuit. The sensor
may include:
Fire: We are using bimetallic strip as a fire sensor to detect
any fire in the flat.
Gas: We are using MQ-6 gas sensor for detecting gas
leakage in flat.
FootS/W: FortheintruderAlert
Panic S/W: For In house patient.
energy. So by using GTBS algorithm the sensor senses the
data and sends to the microcontroller when the
conditionsare not normal. Also we are designing Android
app throughwhich we can monitor the sensor data. We are
connectingsensor to android device by Bluetooth modem.
2.4 Flow Chart
Fig -3: Gate Terminal
WSN Protocol
Fig -2: Flat Terminal
We are configuring WSN using rf by considering 1 master
and 2slavesstructure. The masterwillcontinuouslyscan for
both the slaves. The data is directly gathered from slaves if
theboth are in range. But the master will reconfigure the
network if any slave going out of range of receiver and read
the data using intermediate slave as repeater to receive the
data.
GTBS Protocol
For many application in WSN have redundant data,
which means data is does not change very fast. Here we
are implementing Green Task Based Sensing Algorithm
for Smart Sensor. In most of the application local
condition do not change over a long period of time so
sensing the same data over and over less network life
and required more
Fig -4: Flat Terminal

Hardware Requirement
 PIC 18F4520
 Sensors: Gas(MQ6), Fire(Bimetallic strip),Panic
/Foot Switch
 Display: 16*2 LCD
Software Requirement
 Embedded C
 MPLAB IDE,HT-PIC Compiler
3. CONCLUSIONS
Weconclude thata smart sensornetwork formonitoringand
control of society automation is designed. The developed
system can be monitor and control accurately without
human interface. This society automation using wsn and
gtbs protocol has been experimentally proven to work
efficientlyby easy appliances to it and the application were
successfullycontrol automatically through internet. By this
system we conclude high level of security can be achieve
with the use ofautomation.
4. ACKNOWLEDGEMENT
We would like to thank the principle and HOD of Electronics
and Telecommunication Department of Keystone School of
Engineering Pune, India for their support. Excellent
Guidance of Guide, Staff Members and co-operation of non-
teachings staff is also valuable for us to make this project
successful
REFERENCES
[1] Nagender Kumar Suryadevara, Subhas Chandra
Mukhopadhyay, Sean Dieter ,Tebje Kelly and Satinder
Pal Singh Gill, “WSN based smart sensors and actuators
for power management in intelligent buildings”, IEEE
Transactions on mechatronics, Vol. 20, No. 2,April2015.
[2] A. Alhalafi, L. Sboui, R. Naous, B. Shihada, “gTBS: A green
Task Based Sensing for energy efficient Wireless Sensor
Networks,” in Conference on ComputerCommunications
Workshops. IEEE, 2016, pp. 136 – 143.R. Nicole, “Titleof
paper with only first word capitalized,” J. Name Stand.
Abbrev., in press.
[3] A. Alhalafi, L. Sboui, R. Naous, B. Shihada, “gTBS: A green
Task-Based Sensing for energy efficient WirelessSensor
Networks,” in Conference on ComputerCommunications
Workshops. IEEE, 2016, pp. 136 – 143.
[4] Y. Agarwal, B. Balaji, R. Gupta, J. Lyles, M. Wei, and T.
Weng. Occupancy-Driven Energy ManagementforSmart
Building Automation. In ACM Workshop on Embedded
Sensing Systems For Energy-Efficiency In Buildings,
2010.
BIOGRAPHIES
Krushnachaitanya S. Sargam
Student of Keystone School of
Engineering
Suchitra S. Mhetre
Engineering
Vinay S. Gadade
Engineering
Tanuja M. Jawale
Engineering

Iot Based Society Automation Using GTBS Protocol

More Related Content

Similar to Iot Based Society Automation Using GTBS Protocol (20)

More from IRJET Journal (20)

Recently uploaded (20)

Iot Based Society Automation Using GTBS Protocol