IP Based Security Filter in Mule
Download as PPT, PDF1 like187 views
The IP Based Security Filter in Mule evaluates message properties like IP address and creation timestamp against configured parameters. If the IP address falls outside the allowed range or the timestamp shows the message is older than expected, Mule will not process the message. It can filter by specific IP, an IP range, or a CIDR IP range to control which messages are allowed through the flow.
1 of 4
Download to read offline
More Related Content
What's hot (9)
Ad
Similar to IP Based Security Filter in Mule (20)
Ad
More from Sunil Kumar (8)
Recently uploaded (20)
IP Based Security Filter in Mule
- 1. IP Based Security Filter Generally positioned immediately after an inbound connector in a Mule flow, the Anypoint Filter Processorevaluates two message properties, and rejects the message if the values fall outside of its configured parameters. The properties that are evaluated are: •IP address – If the IP address of a message falls outside the filter’s configured IP address range, Mule does not process the message (see image below). •Creation timestamps — Where the message’s creation date and time fall outside the filter’s configured acceptable lifespan (that is, the message is older than expected), Mule does not process the message (see image below).
- 2. IP Based Security Filter - Flow
- 3. IP Based Security Filter– Flow Contd… • Use HTTP Connector to receive request • Filter by ip – Examples: 192.168.1.10 (To allow only the IP address 192.168.1.10.) 192.168.1.* (To allow the IP address range from 1.0 to 1.254.) (192.168.1.123 | 134.3.1.40) (To allow only the IP addresses 192.168.1.123 and 134.3.1.40.) • Filter by ip range – Examples (Net: 192.168.1.0,Mask: 255.255.255.0 ) • Filter by ip range cidr – Examples (Cidr: 192.168.1.0/24)
- 4. IP Based Security Filter - XML