IRJET- Sentimental Analysis on Product using Statistical Measures
0 likes25 views
This document describes a smart traffic flow management system using an ATmega 328 microcontroller. The system uses image processing of traffic captured by a camera to determine traffic density on each side of a movable road divider. The processed data is sent to the cloud and used to decide whether and how much to shift the road divider to proportionally allocate more space to the side with heavier traffic congestion. This is done by a motor controlled by the microcontroller via a motor driver. The system aims to reduce traffic congestion and travel times by dynamically adjusting the road lanes based on real-time traffic conditions analyzed through image processing.
![International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 05 | May 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1435
6. Conclusion:
In this paper, these system used to implement algorithm to
control and manage the traffic by using image processing.
This system avoids the chances of traffic congestion .It
provide enough space to heavy traffic section. Among the
various sections depend on the priorities clearance for the
road is provided. For emergency vehicles the actual lane is
given to the next priority and also traffic is cleared from
particular lane.
7. References:
[1] S.Lokesh, “An Adaptive Traffic Control System Using
Raspberry PI”, International journal of engineering sciences
& research Technology, IEEE conference June 2014, pp 831-
835
[2] B.Durga Sri,K Nirosha,Sheik Gouse,”Design and
implementation of smart movable road divider using
IOT”,IEEE Conference Dec 2017.
[3] K. Vidhya and A.Bazila Banu,“Density Based Traffic
Signal System”, International Journal ofInnovativeResearch
in Science, Engineering and Technology, Volume 3, Special
Issue 3, pp. 2218-2222, March 2014.
[4] Ms.Pallavi Chaudekar,Ms.Sayati Banerjee,M.K.Muju,Real
time traffic control using image processing,vol.2.](https://image.slidesharecdn.com/irjet-v6i5287-190828071313/85/IRJET-Sentimental-Analysis-on-Product-using-Statistical-Measures-3-320.jpg)
IRJET- Sentimental Analysis on Product using Statistical Measures
- 1. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 05 | May 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1433 Smart Traffic Flow Management System using ATmega 328 Microcontroller Sonali Naram1, Pradnya Mahabale2, Ashlesha Nemane3 1Sonali Naram, Dept. of E&TC Engineering, DYPCOE, Maharashtra, India 2Pradnya Mahabale, Dept. of E&TC Engineering, DYPCOE, Maharashtra, India 3Ashlesha Nemane, Dept. of E&TC Engineering, DYPCOE, Maharashtra, India ---------------------------------------------------------------------***---------------------------------------------------------------------- Abstract - In developed countries, density of traffic congestion is requirement for defining congestion and measuring traffic flow. In this paper by using this system the traffic flow management can be done. Here instead of static road divider we used movable road divider. This divider is controlled by using motor driver. For traffic detection used image processing method to get the live traffic updates. The captured data through camera sent to the cloud for further processing. The decision of road divider shifting is done by analyzing density of traffic either side of road. .The movement of divider is decided by processed data. The data which is shared on cloud provides data to users. Key Words: cloud, IOT, traffic congestion, image processing, traffic control, proportional shifting of road divider, camera, motor, lane. 1. INTRODUCTION The problem with normal road divider is that the number of lanes are fixed. Therefore availability of space of traffic is remains constant it does not provide spacefortrafficflow.In the automatic shifting of road divider it overcomes the demerits of static type road divider. By using IOT concepts this data can available for users through cloud. The decision of shifting road divider is depend upon the traffic density. 1.1 Objective The objective of this paper: 1. To build smart movable divider system by using digital image processing, use of cloud for manual control. 2. Movable road divider will proportionally shift the divider in left or right hand side for ongoing and incoming traffic. 3. By shifting, divider give more space to the heavy cogestion of traffic section on the road. 4. This system will help commuters to reach destination without wasting time. 1.2 Literature Survey Ms.Pallavi Chaudekar, et al. Invented the system that use to control traffic light by using image processing method. Instead of sensing vehicles by sensors this system uses image capturing process. By using analyse data traffic signal delay is controlled. S. Lokesh, et al. This paper uses advantage of image processing for traffic control. This paper avoid manual interfere in traffic flow management. Thus image processing analysis the improvement of road traffic. This system is based on RFID(Radio Frequency Identification).This eliminates the use of extra hardware. This also include the recognisation of vehicles by sound of their siren. B. Durga Sri, et al. The aim of the paper is to reduce the time of travelling in busy hours, prevent traffic congestion and provide smart solutions of traffic issues. This system uses ultrasonic sensors to sense vehicles and road zipper machine for shifting of divider. 2. Methodology Fig -1: Block Diagram The USB camera is connected to PC, hence the captured image by Camera is processed in PC using python programming language. After processing the data, this data is send to the cloud. The processed data is given to user for traffic updates. Other part of the processed data is given to the microcontroller using USB2SERIAL connection. Motor Driver is used to drive the motor which is integrated with the road divider. Motor driver is used to increase the current from 30-40 mA signal coming from the microcontroller to 1 Ampere which is needed for the motor. Here motor is used for divider. For shifting of divider right
- 2. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 05 | May 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1434 and left it uses motor which is fixed bottom of divider. Here D.C. motor is used for giving motion to the driving mechanism. Rotary motion of motor is converted into linear motion with the help of thread on Lead screw and Stud. Dc motor’s speed can control by variation in current that supplied to the motor. 3. OPERATION In the Traffic Flow management System for input purpose here for input purpose system uses USB camera to capture an image in particular time of interval. This camera is connected to PC for image processing work. In PC, for image capturing and image processing python code is used. After processing of image PC provides the data consistingofcount of cars on both side of divider. This data is transferred to the hardware. Depending upon case the shifting of road divider is decided by microcontroller. This system uses two ways to control the traffic. First way uses proportional shifting of divider and signal light controlling. The working of road divider is as follows: Fig -2: Operation of divider In fig 2. As the number of vehicles are more in side A than side B, so there is congestion for vehicles.To avoid this problem by usingmotordriverthedividershiftstowardsside B to provide more space to side A vehicles in fig 2.This provide enough space to vehicles. Another way to control traffic by controlling the signal dpends upon traffic on each sideasshowninfollowingfigure. Fig -3: Traffic control by signal Depending upon number of cars on each side of road the traffic signal light is control. By increasing and decreasing delay of signal lights. At the rush side green light will glow for more time, to get enough time for particular side of traffic. 4. RESULT Car detection using python code: Fig -4: Car detection Traffic updates on cloud in form of graph: Chart -1: Traffic updates after particular time interval 5. Future Work 1. Traffic congestion can be controlledusingzippermachine. 2. Based on the values available in cloud actionscanbemade automatically. 3. For emergency vehicles we can provide various mechanism to reduce the time requiredforclearanceoflane.
- 3. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 05 | May 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1435 6. Conclusion: In this paper, these system used to implement algorithm to control and manage the traffic by using image processing. This system avoids the chances of traffic congestion .It provide enough space to heavy traffic section. Among the various sections depend on the priorities clearance for the road is provided. For emergency vehicles the actual lane is given to the next priority and also traffic is cleared from particular lane. 7. References: [1] S.Lokesh, “An Adaptive Traffic Control System Using Raspberry PI”, International journal of engineering sciences & research Technology, IEEE conference June 2014, pp 831- 835 [2] B.Durga Sri,K Nirosha,Sheik Gouse,”Design and implementation of smart movable road divider using IOT”,IEEE Conference Dec 2017. [3] K. Vidhya and A.Bazila Banu,“Density Based Traffic Signal System”, International Journal ofInnovativeResearch in Science, Engineering and Technology, Volume 3, Special Issue 3, pp. 2218-2222, March 2014. [4] Ms.Pallavi Chaudekar,Ms.Sayati Banerjee,M.K.Muju,Real time traffic control using image processing,vol.2.