IRJET-IoT based Smart Electricity Meter and Power Theft Detection

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 01 | Jan-2018 www.irjet.net p-ISSN: 2395-0072
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 568
IoT based smart electricity meter and power theft detection
Nehal Kathale1, NidhiGhugardare2, SamruddhiKhandale3, Shreya Lokhande4
1,2,3,4Computer Engineering, NBN Sinhgad School of Engineering, Pune
------------------------------------------------------------------------***-----------------------------------------------------------------------
Abstract- In today’s era, electricity is one of the basic
necessities. In the conventional method, a meter reader who
is authorized by the Electricity department visits the user’s
house and notes down the consumed energy units and
calculates the usage charge. In this method problems may
arise due to errors caused by meter reader, it is also time
consuming and requires human labor. Automation of billing
system is the solution to this problem. This paper proposes a
method to automate the billing system. It can be achieved by
incorporating microcontroller with energy meter. A
database at the server stores all the details and will be
accessible to the officials and users on demand. User can
access his daily electricity consumption by using an android
application or a website. Data which is sent by the meter to
the server is provided with network security. If the user fails
to follow the rules and regulations of the electricity board
then the server will automatically cut the power supply.
Electricity theft is the main problem which needs to be
eliminated. This paper suggests a method for effective
energy management and power theft detection. If there is
any tapering between the distribution post and the user’s
meter or any human interference occurs within the meter
then power theft detection message will be sent to server as
well as to the user.
Keywords - GSM Smart billing system, GSM, Tamper
notification, Android, Web development
I. INTRODUCTION
Imperativeness organization and watching has a basic part
for the right utilize and better essentialness organization.
In existing system the meter per user needs to visit each
home to take the exhausted units and cost. This charging
method may rise a couple of issues, for instance, bungles
caused by the meter per user while creating the
scrutinizing. A solitary digit mix-up would altogether be
able to change the cost of the used units. Next issue is
nonattendance of the customer in the house when the
meter per user comes to take the scrutinizing. This will
bear fine to the purchaser. In light of the dreadful
atmosphere conditions this errand is troublesome for per
user. This charging procedure will be dreary. Nowadays
Maharashtra state faces a lack of energy. To manage this
insufficiency government getting energy from various
states and this will bear a colossal total as commitment
around 200 crores. Illegal control utilize is named as
energy thievery [1] [2]. This paper proposed a
methodology to mechanize the charging technique, fruitful
imperativeness organization and energy thievery
recognizable proof on scattering lines. This system
engages MSEB office to assemble the bill and energy theft
acknowledgment data normally without utilizing the man
control. The data assembled at the customer premises are
shared to MSEB office through web likewise, GSM. A Liquid
crystal display (LCD) will exhibit the live readings at
customer premises. The data is sent to the customer
through GSM in addition. Exactly when the essentialness
usage outperforms a particular limit the mind-boggling
weights will subsequently bumbled off and alert the
customers through short message service (SMS) and
through pointer. If there is any changing done in the post
by then control theft recognized message will send
through MSEB office by methods for a GSM. The sharp
imperativeness meter contains essentialness meters, GSM
modem, micro-controllers besides, an exchange circuit.
This proposed structure is exceedingly justified for
national use. This paper redesigns and support automated
India and therefore making the country painstakingly
occupied with the field of development. Whatever remains
of the bit of the paper is dealt with as takes after. In section
II, it portrays the composition survey. In section III, gives
the information about the system designing. In region IV,
the gear execution of the proposed system is cleared up.
Zone V delineates the reasoning of the system executed. In
portion VI the results and talk has been presented. In
territory VII gives the complete of the paper.
II. LITERATURE SURVEY
Electro-mechanical[1] meters with motorized nature of
the segments utilized in many regions ruin due to long
usage . These meters were later substituted by digital
energy meters having high precision and accuracy with
LCD display. Evolution in this pathway includes AMR using
digital energy meters. There are diverse technologies
being utilized for AMR[2] using Bluetooth , GSM , GPRS ,
ZigBee , PLC , RFID and so on. Design of such meters based
on BT, GPRS may direct to network uncertainty; with GSM,
instantaneous invoice might lead to loss of message, which
humiliates performance and accuracy. PLC system makes
use of existing power lines to convey info from energy
meter to server. The solidity and consistency are the main
issues in this method as the carrier wave is readily

troubled by noise; also as these systems are wired AMR
systems transmission distance, transmission cost,
maintenance and security are critical setback in this
technique.
The present system[3] only provides feedback to the
customer at the end of the month that how much power is
consumed in the form of bill. The consumer has no way to
track their energy usage on a more immediate basis. The
consumers are growing exponentially fast and load on
power providing divisions is rapidly rising. In the existing
system meter tampering can be done easily and it’s one of
the major drawback for an energy crisis.
III. SYSTEM ARCHITECTURE
The system designing of shrewd imperativeness meter is
showed up in figure1. It involves arduinouno,
essentialness meter, opt coupler, exchange, LCD show and
GSM modem.
A. Arduino Uno
Arduino is a versatile programmable gear arrange. The
arduino programming change condition is successfully
available in web. It is a microcontroller board in
perspective of the ATmega328P. It has fourteen
mechanized information/yield pins, six straightforward
wellsprings of data, a sixteen megahertz quartz jewel, a
Universal serial bus(USB) affiliation, a energy jack, an In-
circuit Serial Programming (ICSP) header and a reset get.
Arduino is a physical programmable circuit board (PCB)
and a touch of programming called Arduino Integrated
Development Environment (IDE) that continues running
on PC, used to make and exchange PC code to the board.
The Arduino IDE uses an improved type of C, making it less
requesting to make sense of how to program. Arduino
gives a standard casing factor that breaks out the
components of the littler scale controller into a more open
package. The Arduino Uno is a standout amongst the most
well-known sheets in the Arduino family what's more, a
magnificent choice for novices [2].
B. Imperativeness Meter
An imperativeness meter is a contraption that measures
the measure of electrical essentialness gave to or made by
a home or building. The most by and large used
imperativeness meter is kilowatt hour meter. Provoke
control is registered by taking the consequence of the
incite current and voltage. This snappy energy is then
fused against time to give essentialness used by the
buyers. The meters are requested into two essential
orders, electromechanical and electronic. The
imperativeness use is figured by using the yield beats of
essentialness meter. The store is said to eat up 1 unit of
energy when within counter of microcontroller checks
upto 3200 beats.
C. Optocoupler
It is an electronic device which is proposed to give
electrical separation coupling between its data and yield.
Optocouplers execute the effects of electrical confusion
caused by crosstalk, control irregularities and electrical
obstacles. The essential purpose behind an optocoupler is
to keep away from rapidly advancing voltages or high
voltages on the circuit [4].
D. Hand-off
A hand-off is an electrically worked switch. Exchanges are
major parts in a bigger piece of sorts of electrical and
electronic device. It is in addition used as a piece of vitality
building. An over-trouble hand-off that uses a warming
segment to distinguish over-loads. Electro-mechanical
exchange is a quick device which is harsh to pulse and
high-repeat check and surge voltage. It shows a solid lead
in finished weight modes and has a worthy reset extent.
[4].
E. LCD Display
A 16*2 LCD demonstrate contains two lines likewise, there
are 16 characters for each line. Each character is appeared
by 5x7 pixel lattice. This LCD includes two registers,
specifically, Order and Data. The charge select extras the
charge bearings that are given to the LCD. A charge is a
rule given to LCD to do a predefined errand like presenting
it, clears its screen, sets the cursor position, controls show
et cetera. The data enroll saves the data to be appeared on
the LCD [2].

F. GSM Modem
GSM Modem has the ability to send moreover, get SMS to
and from the structure. The correspondence with the
system occurs through RS232 serial port. It needs AT
summons for talking with the microcontroller. This GSM
Modem can recognize any GSM sort out chairman SIM card
and act simply like a mobile phone with its own particular
exceptional phone number. GSM advancement gives the
favorable position that the structure is accessible in
remote zones [1].
IV. METHODOLOGY
A. Shrewd essentialness meter Insightful imperativeness
meter is worried about the robotization of the electric
charging structure. Correct examining is possible by using
redid microcontroller. The imperativeness meter is
interfaced with the microcontroller using an interfacing
contraption/Opto-coupler. The beats from the
imperativeness meter are recognized by an Optocoupler
and it changes over the beats to electrical signs going
about as clock beats for the microcontroller. In bona fide
system 1unit =3200 beats yet here in this paper
considering 1 unit= 10pulses for comfort. In light of these
heartbeats ardunio will subsequently make ate up unit and
cost. A LCD indicate is related with microcontroller to
show the used units and cost. Around the complete of
consistently the data containing the ate up units and cost is
shared to a database gave by the expert association, which
is kept at MSEB office through web and to the customer
through GSM. The interfacing of the essentialness meter
with web and GSM can be expert by using Ethernet shield
on arduino board [1] [4]. All the web interfaced data are
escaped in a database at the premises of pro association,
which can be made by MySQL. Right when the
essentialness use is more than the point of confinement
regard the significant loads in the client server plan.
MySQL is definitely not hard to tune additionally, progress
for the most asking for applications. MySQL ended up
being comprehensively notable because of its speed and
straightforwardness. It is a high performance however for
the most part fundamental database structure and is much
confounding to set up and control than greater systems
[5].
B. Energy theft acknowledgment
Two separate electronic essentialness meters can be used
for control theft acknowledgment, one meter is presented
at customer side and the other is presented at a pole based
structure. Customer side imperativeness meter measures
the energy ate up by stack over a period. Shaft based meter
is talented to gage the energy movement over each line
related with that pole. Directly the microcontroller in the
pole based meter has two readings: one is signify control
circled by the post itself and another is control eaten up by
the customer. In normal case these two readings will be
same and which appears there is no energy theft. In case
there is tapping done by any unapproved individual on
hold over a particular period there will be a complexity
between the more than two meter readings.
Microcontroller put in the pole meter will take a gander at
these two regards got from the two meters and if the think
control on post is more than the energy send by customer
side meter by then control thievery happened in question.
This theft signal delivered on post structure can be
transmitted to substation/MSEB office by control line
correspondence methodology or by remote strategy
whichever is suitable and preservationist. Remote
correspondence is done by using a Bluetooth module. HM-
10 is a Bluetooth V4.0 Bluetooth low imperativeness (BLE)
interpretation. It has a working repeat of 2.4GHz ISM band.
Transmission frame can be used to transmit data between
two Bluetooth devices. Protection should be given to
disasters of line. Figure 2 shows the energy theft area
game-plan [3] [4] [5].
V. HARDWARE IMPLEMENTATION
The energy supply is the fundamental unit in each
electrical and equipment wanders circuit, which is used for
giving the normal vitality to the microcontroller and
diverse parts in the circuit. Generally, this energy supply
square contains wander down transformer, center tapped
rectifier, and IC 7805 voltage controller. Microcontroller in
the Arduino requires 5V control supply. The
microcontroller piece can be considered as the standard
square of the entire circuit. It is altered to control each one
of the parts to play out the pined for operation. Here, in
this proposed structure Arduino uno is used and altered
using Arduino programming. The imperativeness meter is

interfaced with the arduino using an interfacing device
called Optocoupler [3]. The 230V AC control supply is
given to work the loads. Fundamentally, we need to enroll
the endorsed convenient number with the remote energy
use meter. This, enrolled versatile number can screen the
remote essentialness meter system. In this remote
imperativeness meter, SIM in the GSM modem sent the
message showing up the cost of the ate up essentialness
units to MSEB office toward the complete of reliably. A LCD
module is used to demonstrate the present utilize and
units consumed. After utilization of each unit the entirety
and total units will be enlarged. This gives the customer to
consider his an opportunity to amend control units used
and cost particularly from the imperativeness meter so
that there is zero possibility of bill changing. The remote
imperativeness meter decreases the work for control
charging to each and each home or office. Right when the
imperativeness use outperforms a cutoff regard, the mind-
boggling weights will be normally isolated using exchange.
A similar will caution the customers by exhibiting a sign
globule and a message will be sent to the customers. If
there is any tapping done on the flow lines, expeditiously a
message which includes the purposes of enthusiasm of
region is sent to the energy office [3].
VI. RESULTS AND DISCUSSIONS
Around the complete of consistently the energy charge
sent to the MSEB and customer through GSM module. An
enlisted SIM number is given in the GSM module. The
figure 3 and figure 4 exhibits the modified energy charge
as SMS to the MSEB and customer separately with the trial
set up.
A database is made in the MSEB office which records the
bill purposes of enthusiasm of each home. All the web
interfaced data are escaped in a database at the premises
of authority association, which can be made by MySQL.
Figure 5 shows up the database made in the trial set up of
the procedure proposed.
Exactly when the imperativeness use is more than the
farthest point regard the staggering weights in the home
circuit will thusly faltered off using exchanges. A message
sent to the customer to careful about the over
imperativeness usage than the edge regard. Figure 6
exhibits the message of over essentialness use with
exploratory set up.
In the event that there is any tapping done on the
appropriation lines, instantly a message sent to the energy
office. Figure 7 demonstrates the theft distinguished
message with exploratory set up.
VII. CONCLUSION
Brilliant essentialness meter is definitely not hard to
present and beneficial for both imperativeness provider
and client. Using this meter can decrease the manual
undertakings to take the readings from the imperativeness
meter which is reasonable. This system also urges the
customers to think about their essentialness use. The
information is transmitted to the energy board office using
GSM modem on GSM sort out and through web generation
of data base. It can moreover bind the imperativeness use
by demonstrating the over essentialness use. The

proposed system keeps up a vital separation from control
theft to broad degree and impacts the essentialness to
meter precisely planned. This meter extends the pay of the
Government by perceiving the unapproved changing in the
electrical links. The proposed technique can be stretched
out for customized control cutting if the bill isn't paid.
REFERENCES
[1] (Noman Mehmood , Zain Anwar Ali , Ali Akbar
Sidiqui , M.Asif , SarwarWasi, 2011) : Electronic
Meter Reader & Data Base Management System
[2] (SarwarShahidi, Md. Abdul Gaffar, Khosru M.
Salim , 2013) : Design and implementation of
Digital Energy Meter with data sending capability
using GSM network.
[3] (Adhau A. A., Patel N. M., Zaidy A. T., Dr. Patil S. L.,
Prof. Deshpande A. S , 2013) : Low Cost Electricity
Meter Reading System using GSM.
[4] (SagarPatil , Gopal Pawaskar , KirtikumarPatil,
2013) : Electrical power theft detection and
wireless meter reading .
[5] (Jenita Ann Mathews, Jily Varghese , Jisha Raju,
Lidiya Daley, Beena A.O,2017) : Intelligent energy
meter with power theft detection

IRJET-IoT based Smart Electricity Meter and Power Theft Detection

More Related Content

What's hot (20)

Similar to IRJET-IoT based Smart Electricity Meter and Power Theft Detection (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET-IoT based Smart Electricity Meter and Power Theft Detection