IRJET-Wireless Controlling of Remote Electrical Device using Android Smartphone

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 06 | June-2018 www.irjet.net p-ISSN: 2395-0072
© 2018, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 2474
Wireless Controlling of Remote Electrical Device Using Android
Smartphone
Nishi Tikku 1, Apoorva Pathe2
1 HOD in Dept. of MCA, Vivekanand Education Society of Information Technology, Mumbai, Maharashtra, India,
2 Student of Dept. of MCA, Vivekanand Education Society of Information Technology, Mumbai, Maharashtra, India
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract: In today's world technology plays a crucial role as
it simplifies the human life therefore it is also centerofinterest
for many researchers. Controlling the home appliances and
electronicsgadgetswirelessly throughSmartphonetechnology
can make humans life easier. That is, through this paper, we
target to control the devices with our android smartphone. In
other words, the smartphone application’s interface will
enable the user to control that device using Wi-Fi module. The
smartphone application will connect to an electronic
chip(Arduino) to which an LED will be connected. Themode of
connection will be Wi-Fi module which we have planned to
use.
Key Words: Smartphone, LED, Arduino, Wi-Fi module.
1. INTRODUCTION
In today’s world we all are surrounded with electronic
device. This device need wires for installation more over for
remote locations long wires are needed which is more
expensive than the use of a mobile network thatcanperform
the same task without this wire i.e. by using wireless
connection. The Global system for mobile communication
(GSM) was initially designed for voice;it canbeusedtoserve
other purposes than talking. GSM can be used as the
communication via to receive signals captured by machines
in remote places, and also to send control signals to remote
machines.
In this paper we have planned to develop an application
which would enable the users to control electronic devices
using smartphone provide they should be in same network.
The main idea is that the user should be able to control the
devices from any location within the same Wi-Fi range.
Whyusea wireless electric controllingSystem?
The traditional wired electric control is a greatsystem, butit
can be difficult to control the areas of access [1]. Often the
range of a wired network cannot reach has a physical
limitation. Concept of remote controlling is also very
prominently and is used in home security systems,
surveillance systems, intrusion detection mechanisms etc.
[1].
Also, if we have a large organization or building with several
electrical appliances installed. Every electrical appliance has
its own control switch using which a person can turn ON or
OFF the appliance. Suppose, the user needs to turn ON or
OFF the appliances of all or several rooms which might be
located far away from each other, it would be little difficult
and time consuming [1]. This might be aggravated with the
fact that the user needs to control i.e. turn ON or OFF the
appliances immediately for some necessary, urgent reason
or may be, he/she needs to do that every day, routinely, in
order to save electricity bills and the money incurred on
their bills.
It would be easier and conveniently for user to control
several electrical appliances by just sitting at one place,
whenever needed, under any circumstances,itwould bringa
lot of convenience which would reduce the time spend or
invested in other constructive tasks. In large building or a
large penthouse or a bungalow this could be very time
consuming, only to turn ON or OFF the electrical appliances,
a one stop solution would definitely useful for users to save
their time and energy spent on just moving around. Also, in
critical situations, it is highly essential that instead of
manually moving around to control the appliances, the user
should be able to do that quickly and easily just by sitting at
one place. For ex: Suppose, there is a fire in the premises or
some unlawful activity which might be going to happen. In
this situation user has this power to turn OFF all the devices,
as the situation might demand,theeventcouldbe effectively.
II. HARDWARE DESIGN AND INTERFACING
Arduino is a microcontroller which can be used for making
computers that can sense and control more of the physical
world than your desktop computer. It is a open-source
platform. Also, there is software platform Arduino in which
one can code and embed in Arduino chip easily. We can use
this software to develop code that can take inputs from a
variety of devices, and also send controlling signals to
devices like variety of lights, motors, and other physical
outputs. We can create Arduino projects that are stand-
alone, or they can communicate with software running on
your computer. The Arduino programming language is an
easy to understand and learn
Components used:
1. Micro-controller (Arduino)
2. DC fan
3. 12V dc battery
4. Bread Board
5. Jumper Wires
6. Wi-Fi Module

III. PROPOSED METHODOLOGY
As we know that the technology is advancing by leaps &
bounds and mobile technology has become an integral
necessity in our lives today. We wish to get everything done
right from the place where we are. Be it Banking, News,
Chatting, Networking, Talking, Locating someone, etc. We
cannot imagine certain significant tasks without the mobile
technology.
Embedded systems have become a buzzword in the last
years, but embedded systems and processors have been
around for much longer than that. Embedded systems are
now commonly coupled with Wi-Fi modules which increase
the scope and enhance the application areas to a greater
extent.
Wi-Fi module can be used as the communication via to
receive signals captured by machines in remote places, and
also to send control signals to remote machines. This can
reduce installation of long wires to reach remote places
which is more expensive than the use of a mobile network
that can perform the same task. Of course, suitable sensors
and actuators are needed for the mentioned examples and
others. Some automatic Wi-Fi module is also needed, but
long wired installation is not necessary
The features include low cost, low power and small size.
Also, the robustness for the interferences has made Wi-Fi a
highly versatile and attractive. Tofurtherenhancethisidea,I
have planned to develop a mobile application which would
be able to control an electronic device remotely. I have
planned to interface the mobile technology with electronics.
That is, through this application, we target to control a fanor
robocar from any place in the world. We caneasilyassume &
correlate this idea with controlling the home appliances in
our homes through mobile.
That is, how great & convenient would it be, if we are able to
control our home appliances from any part of the world
through mobile technology? In order to develop this
application, the mobile application will connect to an
electronic chip to which a fan or robocar will be connected.
The mode of connection will be Wi-Fi module whichwehave
planned to use.
This project will have two parts namely: Mobile Part and
Electronic Part. The mobile part will have an interface
through which we would be able to turn ON/OFF the fan
remotely from any part of the world or move forward,
backward, left or right through the robocar. The electronics
part will consist of a chip and Wi-Fi module to which a fan or
robocar will be connected.
Once the user presses ON button on the mobile handset, the
fan will turn ON or enable. Otherwise, if the user presses
OFF, the fan will go off and be disabled. This can be achieved
by mounting a shield on the chip which will enable it to
obtain an IP that would eventually help the connection
between chip, WIFI module & mobile. This concept is also
very prominently used in home security systems,
surveillance systems etc. There would be three parts:
Electronics Part, Web Part and Mobile Part.
1.Electronics Module:
This module would consist of a small electronic board name
Arduino that we would program in C/Arduino.Inaddition to
many other components, this board consists of a
programmable microcontroller. On the top of this (base)
board, we would be mounting a Wi-Fi module which would
give us the freedom to connect it to a system which would
act as the remote server in our project. We assume that the
remote server would be in an ON statealwaysandconnected
to internet. Now we can connect Arduino and our mobile
phone to the Wi-Fi. When we ON/OFF the devices the signal
is sent to electronic devices via Wi-Fi to Arduino and
Arduino to electrical devices.
2. Mobile Module:
We need to download an android application named Blynk.
Steps for configuring Blynk App:
1. First download it from Google Play Store and install it in
Android mobile phone.
2. After this, it is required to create an account. You can use
your Gmail account.
3. Select Arduino Board and enter a name for your project.
Fig a. Project creation in Blynk
4. After you enter details it will display Auth Token Code we
can simply mail it to our Email Account and then copy and
paste in Arduino sketch (Program Code).

5. Enter received Auth Token Code in Arduino sketch.
6. Then click on create button in Blynk app.
7. Now Select the Joystick Widget, Click on Joystick,
Configure the Joystick (see the Video at the end) and hit the
back button.
Fig b. Widget Box of Blynk
Fig c. Joy Stick component add in project
Fig d. Joy Stick setting for project
8. After it press Play button at the right top of screen.
Note: Do the same thing for controlling Fan.
IV. DIAGRAMMATIC REPRESENTATION
Fig e. Working of project

V. FUTURE SCOPE
Although the application is developed on a cutting-edge
technology, it holds a great scope of improvement &
enhancement as mentioned below:
1. We can further strengthen this application to control a
real time electrical device.
2. The instruction from Android handset cancheck ifGPRS
feature is enabled. In case, it is not, it can automatically
enable it.
3. This application can be enhanced to control multiple
electrical devices at the same time at different
geographical locations
4. We can improve this application so that one electrical
device could be controlled from multiple locations
through different Android handsets
5. For different types of electrical devices, we can
customize this applicationforhandlingdifferenttypesof
operations. For ex: for fans, we can develop a module
that controls the speed of the fans also in addition to
turning them ON/OFF
6. We can build artificial intelligence in this system so that
it can be used as a home security system and does tasks
like measuring room temperature and in case of a fire,
should turn ON watersprinklersandalsoinformnearest
fire station through Call/SMS or buzzer alarms.
7. We can use an LCD screen to display the fan speed on
the screen.
VI. CONCLUSION
1. This application would enable a user to control an
electrical device effectively using Wi-Fi module
2. This application will empower the users to save time
and energy
3. Since it involves Wi-Fi, the user would be able to control
the device from anywhere in the house
4. It would facilitate the home-based security applications
through remote controlling of any electrical device
5. This application can also be used to measure room
temperature & humidity with some minor additional
hardware.
REFERENCES
[1]https://www.ijraset.com/fileserve.php?FID=5559
[2]https://www.researchgate.net/publication/231182479_
Bluetooth_based_home_automation_system
_using_cell_phone
[3]https://www.researchgate.net/publication/270903854_
Android_Based_Bluetooth_Appliance_Control_Mechanism
[4]http://www.arpnjournals.org/jeas/research_papers/rp_2
016/jeas_1116_5314.pdf
[5]https://pdfs.semanticscholar.org/d531/c8be3aebb590de
35278c17219445c6fd6e48.pdf

IRJET-Wireless Controlling of Remote Electrical Device using Android Smartphone

More Related Content

What's hot (20)

Similar to IRJET-Wireless Controlling of Remote Electrical Device using Android Smartphone (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET-Wireless Controlling of Remote Electrical Device using Android Smartphone