ISOMAT_Product List_ 2012

Product List

Industrial Floorings Premixed Plasters Repairing Materials Tile Adhesives Concrete & Mortar Waterproofing
& Paints & Grouts Additives Materials

CONTENTS Page

1. Waterproofing Materials
1.1 Waterproofing of Basements & Tanks 4
1.2 Waterproofing of Terraces 6
1.3 Waterproofing of Walls 9
1.4 Complementary Waterproofing Products - Reinforcements 11
1.5 Waterproofing Materials for Joints 13
1.6 Roofing Membranes 16
1.7 Drainage Membranes 17

2. Concrete & Mortar Additives
2.1 Concrete Additives 22
2.2 Mortar Additives 25
2.3 Auxiliary Concreting Agents 26

3. Tile Adhesives & Grouts
3.1 Tile Adhesives 30
3.2 Tile Grouts 34
3.3 Adhesives for Special Applications 39
3.4 Complementary Products 42

4. Repairing Materials & Paints
4.1 Strengthening & Repairing of Concrete 44
4.1.1 Cement-Based Materials 44
4.1.2 Epoxy-Based Materials 46
4.1.3 Fibre Reinforced Polymers (F.R.P.) 48
4.2 Construction and Repairing of Masonry Wall 49
4.3 Putties, Paints & Protective Materials 50
4.3.1 Putties 50
4.3.2 Emulsion Paints & Primers 53
4.3.3 Acrylic Paints & Primers 54
4.3.4 Enamel Paints & Primers 56
4.3.5 Epoxy Paints & Primers 56
4.3.6 Protective materials & Varnishes 58
4.4 Cleaning Agents 60
4.5 Elastic Joint Sealants 62
4.6 Bituminous Repairing Materials 65

5. Premixed Plasters
5.1 Cement-Based Plasters 68
5.2 Acrylic Plasters 71
5.3 Silicone Plasters 72
5.4 Plaster Primers 73
5.5 Plastering Reinforcement Materials 74

6. Industrial Floorings
6.1 Cement-Based Floorings 76
6.2 Impregnations for Cement-Based Floorings 77
6.3 Epoxy-Cement Based Floorings 78
6.4 Epoxy-Based & Polyurethane-Based Floorings 78

Appendix
Tools & Accessories 84
Product Index 86


1.1 Waterproofing of
Basements & Tanks
Terraces
Walls
1.4 Complementary Waterproofing
Products - Reinforcements
1.5 Waterproofing Materials
for Joints
1.6 Roofing Membranes
1.7 Drainage Membranes

3

1.1 Waterproofing of Basements & Tanks
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.

AQUAMAT Cement-based, brushable sealing slurry. It offers total Grey
0317/1 waterproofing against water pressure up to 7 atm according to 25 kg 54
DIN 1048. Ideal for waterproofing basements and reservoir 5 kg 4 160
tanks. Suitable for potable water tanks according to W-347,
White
ISO 8467. Ideal for the internal (negative side) waterproofing of
underground areas, since it can withstand negative water 25 kg 54
pressure. 5 kg 4 160
Color: Grey, white, light blue. Light Blue
Cement-based brushable 25 kg 54
sealing slurry Consumption: 2,0-4,0 kg/m2.

AQUAMAT-MONOFLEX Flexible, one-component, polymer-modified brushable sealing 18 kg 54
0317/1 slurry. It is used for waterproofing surfaces of concrete, plaster,
NEW brick, cement, mosaics etc. Suitable in cases where elasticity of
the waterproofing layer is required, such as roofs and bathrooms
that will be covered with tiles, inverted roofs, under ground tanks
etc.
Color: Grey.

Flexible, one-component, Consumption:
brushable sealing slurry 2,0-4,0 kg/m2

AQUAMAT-FLEX Flexible, two-component brushable sealing slurry (25 kg of Grey
0314/1 cement powder + 8 kg of resin emulsion). Suitable for 33 kg 54(A)
waterproofing substrates that show or are expected to show (A+B) 54(B)
haircracks due to contractions-expansions or vibrations.
Ideal for surfaces that will be covered with tiles, inverted roofs,
under ground water tanks etc. Color: Grey. 18 kg 18
Packages: 33 kg (25 kg A+8 kg B), (A+B) (A+B)
18 kg (13,6 kg A+4,4 kg B)
Flexible, 2-component,
brushable sealing slurry Consumption: 2,0-4,0 kg/m2.

AQUAMAT-ELASTIC Elastic, two-component brushable sealing slurry. Suitable for Grey
0338/1 waterproofing substrates that show or are expected to show 35 kg 54(A)(B)
haircracks due to contractions-expansions or vibrations. Ideal
White
for roofs, flower stands, swimming pools, tunnels, above ground
water tanks etc. Also, for waterproofing under tiles combined 35 kg 54(A)
with the elastic tile adhesive Isomat AK-ELASTIC. (A+B) 54(B)
Color: Grey, white. 18 kg 18
Elastic, 2-component, 18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B). 7 kg 48
brushable sealing slurry Consumption: 2,0-4,0 kg/m2. (A+B) (A+B)

AQUAMAT-PENETRATE Cement-based brushable sealing slurry. It penetrates the mass 20 kg 54
0344/1 of the concrete and waterproofs it. It remains permanent active,
and therefore, it continuously protects construction from any
water attack presence. It is capable of sealing hair cracks, even
if they appear afterwards. It has resistance to both positive and
negative water pressure. Suitable for waterproofing basements,
foundations, manholes and tanks.
Color: Grey.
Brushable sealing slurry
Consumption: 1,5 kg/m2.
with crystallizing effect
4

Waterproofing of Basements & Tanks

AQUAFIX Rapid setting cement for instant plugging and sealing of water 15 kg 32
0315/1 leaks. 5 kg 4 75
Color: Grey.
1 kg 15 240
Consumption:
Approx. 1,6 kg/lit.

Rapid-setting cement for
instant sealing of water
leaks

DUROPRIMER-SG Two-component, solvent-free epoxy primer. It is used as a 10 kg 42
0402/2 waterproofing layer on floors that are subjected to coatings (A+B) (A+B)
that face problems with rising damp and will be covered with
epoxy flooring systems or cement screeds. Moreover, it can be
used as a primer under the DUROFLOOR epoxy system on
substrates that are still damp or oil contaminated (first, the
substrate should be cleaned from oils). Color: Light beige.
Two-component epoxy
primer for concrete Consumption:
floors 600-1000 g/m2.

AQUAMAT ADMIX Concrete waterproofing admixture in powder form that is added 20 kg 54
0317/1 during concrete preparation forming insoluble crystalline
NEW compounds. Improves resistance to water permeability and does
not affect vapor permeability of concrete. It remains
permanently active and receives equally well positive and
negative hydrostatic pressure. Suitable for waterproofing
foundations, basements, tanks, wastewater treatment,
swimming pools etc. Color: Grey.
Concrete waterproofing
admixture with
Consumption: 0,8-1,2 kg per 100 kg of cement.
crystallizing effect
PLASTIPROOF Plasticizer-waterproofing admixture (ASTM C-494, type A, *1000 kg
0120/1 ELOT EN 934-2:T2 & T9). Used for formulating concrete with 240 kg 2
low water permeability and improved physical properties.
20 kg 39
Color: Dark brown.
5 kg 4 72
Consumption:
0,2-0,5 kg per 100 kg of cement.
Plasticizer, type A -
admixture

* Packages marked with an asterisk are available 3 days after reception of order.

5

Waterproofing Materials
1.2 Waterproofing of Terraces

ISOFLEX Brushable elastomeric liquid membrane possessing high *150 kg 3
0201/1 elasticity and durability. Used for jointless and seamless 25 kg 24
waterproofing of terraces.
15 kg 44
Color: White, redbrown.
5 kg 4 110
Consumption: 1 kg 12 360
1,0-1,5 kg/m2.

Brushable elastomeric
waterproofing membrane
ISOFLEX-T25 Brushable elastomeric liquid membrane possessing high *150 kg 3
0225/1 elasticity and durability even to extreme temperature conditions 25 kg 33
(from -250C to +1200C). Used for the continuous, free of seams 15 kg 42
or joints, elastic, vapor-permeable waterproofing of 5 kg 4 72
terraces.
Color: White, redbrown (The redbrown color is available in 1 kg 12 360
1 kg, 5 kg and 15 kg packages.)

Brushable elastomeric Consumption:
waterproofing membrane 1,0-1,5 kg/m2.

ISO-PRIMER Primer of ISOFLEX and ISOFLEX-T25. 20 kg 39
0206/1 Color: White. 5 kg 4 72
1 kg 12 324
Consumption:
0,2-0,3 kg/m2.

Primer of brushable
elastomeric waterproofing
membranes
ISOFLEX-PU One-component brushable, polyurethane, liquid membrane. 25 kg 33
0226/1 Used for the continuous, free of seams or joints, elastic, 6 kg 4 120
vapor-permeable waterproofing of terraces.
1 kg 16 320
Color: White. Other colors by order.

Consumption:
2
Approx. 1,5 kg/m .

Brushable polyurethane
waterproofing membrane

PRIMER-PU Primer of ISOFLEX-PU. 17 kg 33
0227/1 Color: Transparent. 5 kg 4 120
1 kg 12 360
Consumption:
0,2-0,3 kg/m2.

Primer of ISOFLEX-PU

6

Waterproofing of Terraces

SM-16 Solvent used to dilute polyurethane coatings. Especially suitable 5 lit 4 72
1407/1 for diluting the brushable polyurethane waterproofing
membrane ISOFLEX-PU, when applied by spraying. It can also
clean tools used for the application of ISOFLEX-PU and also
tools from epoxy coatings residues. Additionally it can be used
as a thinner for epoxy coatings. For polyurethane coatings SM-
16 is added in a proportion up to 10% by weight.
Special solvent for
polyurethane coatings

AQUAMAT-MONOFLEX Flexible, one-component, polymer-modified brushable sealing 18 kg 54
0317/1 slurry. It is used for waterproofing surfaces of concrete, plaster,
NEW brick, cement, mosaics etc. Suitable in cases where elasticity of
the waterproofing layer is required, such as roofs and bathrooms
that will be covered with tiles, inverted roofs, under ground tanks
etc.
Color: Grey.

Flexible, one-component, Consumption:
brushable sealing slurry 2,0-4,0 kg/m2.

AQUAMAT-FLEX Flexible, two-component brushable sealing slurry (25 kg of Grey
0314/1 cement powder + 8 kg of resin emulsion). Suitable for 33 kg 54(A)
waterproofing substrates that show or are expected to show (A+B) 54(B)
haircracks due to contractions-expansions or vibrations.
Ideal for surfaces that will be covered with tiles, inverted roofs,
under ground water tanks etc. Color: Grey. 18 kg 18
18 kg (13,6 kg A+4,4 kg B)
Flexible, 2-component,
brushable sealing slurry Consumption: 2,0-4,0 kg/m2.

AQUAMAT-ELASTIC Elastic, two-component brushable sealing slurry. Suitable for Grey
0338/1 waterproofing substrates that show or are expected to show 35 kg 54(A)(B)
haircracks due to contractions-expansions or vibrations. Ideal White
for roofs, flower stands, swimming pools, tunnels, above ground
35 kg 54(A)
water tanks etc. Also, for waterproofing under tiles combined
(A+B) 54(B)
with the elastic tile adhesive Isomat AK-ELASTIC.
Color: Grey, white. 18 kg 18
Elastic, 2-component, 18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B). 7 kg 48
brushable sealing slurry Consumption: 2,0-4,0 kg/m2. (A+B) (A+B)

ISOGUM P Plastomeric bituminous membrane (APP) reinforced with Roll
0801/4 polyester cloth (180 g/m2) with or without mineral chipping. 1m x 10m
Fixed by torch welding without using bituminous glue.
(10 m2)
PLAIN MEMBRANES
ISOGUM 4 P (4,0 kg/m2). 25
MEMBRANES WITH MINERAL CHIPPING
Plastomeric bituminous ISOGUM 4 P MIN (4,0 kg/m2). 25
membrane (APP) ISOGUM 4,5 P MIN (4,5 kg/m2). 23
reinforced with polyester
cloth of 180 g/m2 ISOGUM 4,5 P MIN WHITE (4,5 kg/m2). 23
7


ISOGUM 3V Plastomeric bituminous membrane reinforced with fiberglass Roll 30
0810/4 tissue (50 g/m2). Fixed by torch welding without using 1m x 10m
bituminous glue.
(10m2)

Weight: 3,0 kg/m2.

Plastomeric bituminous
membrane reinforced with
fiberglass tissue (50g/m2)
ISODIEN 4 PF ALU Elastomeric bituminous membrane reinforced with polyester Roll 25
0811/4 cloth (150 g/m2) and covered with aluminium sheet. Fixed by 1m x 10m
torch welding without using bituminous glue.
(10m2)

Weight: 4,0 kg/ m2.

Elastomeric bituminous
membrane covered with
aluminium sheet
ISOPAST Bituminous emulsion with excellent adhesion and resistance to 19 kg 36
1014/6 acid and alkaline solutions. Used for waterproofing foundations, 5 kg 120
retaining walls, floors, inclined (pitched) roofs etc. Also used as
a primer for fixing bituminous membranes.
Color: Black.

Consumption:
Approx. 0,2-1,0 kg/m2/layer.
Bituminous emulsion

ISOLAC-BT Bituminous waterproofing varnish with solvents. Provides 17 kg 36
1015/6 (former ISOLAC) excellent adhesion to all kinds of substrates and water 5 kg 120
impermeability. Used as a primer for fixing bituminous
membranes, as a vapor-barrier in insulations, and for
protecting concrete or metal surfaces from moisture
(protection against oxidation). It is applied in 1-3 layers by
roller or brush.
Color: Black.
Consumption: On metal surfaces: 100-150 g/m2/layer.
Bituminous varnish
On concrete surfaces: 250-300 g/m2/layer.

ISOMAC Bituminous mastic with excellent adhesion and elasticity. It can 20 kg 36
1018/6 be cold-applied with a smooth trowel. Suitable for sealing joints 5 kg 120
on horizontal and vertical surfaces, for sealing-bridging hair
cracks and for flashing (sealing) difficult points during the fixing
of bituminous membranes (drainpipes, joints or junctions in
parapets etc). Also used for repairing in waterproofing layers
formed by bituminous membranes.
Color: Black.
Bituminous mastic
Consumption: 1,2-1,3 kg/lit.

8


ISOPAST-RUBBER Elastomer bituminous emulsion consisting of high quality 19 kg 36
1014/6 asphalt, resins and special additives. It has high durability in
moisture and excellent elasticity. Provides excellent adhesion
on various substrates like concrete, metal, wood etc. It
is used for waterproofing foundations, retaining walls,
terraces, roofs, etc.
Color: Brown-black.
Elastomer bituminous Consumption:
emulsion 0,35-0,50 kg/m2/layer.


1.3 Waterproofing of Walls

FLEXCOAT Elastic, waterproofing paint. Offers total water impermeability White
0202/6 for the protection of walls against rain. It has high elasticity and 44
10 lit
crack bridging ability on surfaces that show hairline cracks.
3 lit 4 110
Suitable for painting and waterproofing walls, protecting of
bituminous layers etc. For exterior and interior use.
Colors: White. NCS
266 selected colors NCS pallet (minimum order Pallet
quantity 10 lit). 10 lit 44
High quality, elastic, 3 lit 4 110
Coverage: 8-12 m2 per liter.
waterproofing paint

FLEX-PRIMER Highly penetrative, polymer aqueous emulsion. Used in 20 kg 39
0224/6 combination with the highly elastic waterproofing paint 10 kg 44
FLEXCOAT, it forms an ideal system for the waterproofing of
5 kg 4 72
walls. It is also the ideal primer for the acrylic pasty plaster
1 kg 12 324
MARMOCRYL. Color: White.
Coverage: 5-10 m2/kg.
The package of 10kg is available in round, plastic container that
High quality acrylic is useful for preparing colored primer. A colored primer is
water-based primer necessary when the substrates will be covered with acrylic
plasters of base D & TR.

NAN0-SEAL Highly penetrative, polymer emulsion. Applied on porous 220 kg 2
0228/1 substrates stabilizes and protects them from the humidity and 5 kg 4 72
the creation of salt stains. Nano-seal prevents the growth of 1 kg 12 324
mould and fungi on the surface of the substrate. It can be over-
coated with paint.
Color: Light blue (transparent after drying).

Waterproofing and Consumption:
stabilisation of surfaces 100-200 g/m2 depending on the absorptivity of the substrate.

9

Waterproofing of Walls

PS-20 Ready-to-use, silicone-based, transparent solution with 20 lit 24
(former PROTESIL) solvents for waterproofing. It ensures extremely high water- 3 lit 4 120
0207/1 repellence and long term protection. It can be applied on 1 lit 18 288
various surfaces (natural or synthetic stone, unpainted plaster,
exposed masonry, decorative bricks, roof tiles, tiles, exposed
concrete etc.) for their protection against rain effect.
Also suitable for waterproofing tile joints.
Color: Transparent
Silicone-based solution
for waterproofing Consumption: 0,2-0,4 lit/m2.

PS-21 Ready-to-use, silicone-based solution without solvents for 20 lit 39
(former PROTESIL-W) waterproofing. It ensures extremely high water-repellence and 5 lit 4 72
0207/1 long term protection. It is suitable for waterproofing of tile joints 1 lit 12 324
and the protection against rain effect of various surfaces like
natural or synthetic stone, plaster, exposed masonry,
decorative bricks, roof tiles, tiles, unpolished marble, exposed
concrete etc.). It can be used even on slightly wet substrates.
Color: White (transparent after drying)
without solvents for
Consumption: 0,2-0,4 lit/m2.
waterproofing
NANOPRO-C Water-based emulsion with high penetrating ability, based on 220 lit 2
0228/1 nano-molecular structure. Protects porous surfaces from 20 lit 39
moisture and salt stains. Suitable for concrete, masonry, plaster, 5 lit 4 72
tile grouts, gypsum boards, chip boards, natural stones etc. For
1 lit 12 324
indoor and outdoor applications. Color: White (transparent after
drying).

Consumption:
Nano-impregnation for 100-200 ml/m2, depending on the substrate's absorptivity.
protecting porous surfaces

NANOPRO-M Water-based emulsion with highly penetrating ability based on 220 lit 2
0228/1 nano-molecular structure. Protects unporous surfaces, from 20 lit 39
moisture and salt stains. Suitable for polished marbles, granites, 5 lit 4 72
tiles, porcelain etc. For indoor and outdoor applications.
1 lit 12 324

Consumption:
Nano-impregnation to 50-70 ml/m2, depending on the substrate's absorptivity.
protect surfaces against
oils

NANOPRO-L Water-based emulsion with high penetrating ability, based on 20 lit 39
0228/1 nano-molecular structure. Protects porous and slightly porous 5 lit 4 72
surfaces (marbles, granites etc) from oil stains, moisture and 1 lit 12 324
salt stains and prevents from fungi-mould growth. Suitable for
concrete, masonry, plaster, tile grouts, gypsum boards, chip
boards, natural stones etc. For indoor and outdoor applications.
Nano-impregnation to
protect surfaces against Consumption:
oils 50-100 ml/m2, depending on the substrate's absorptivity.

10

Waterproofing of Walls

ISOMAT SL 17 Solvent-free elastomeric liquid membrane possessing high 15 kg 44
0523/3 elasticity and durability. Used under tiles for jointless and 5 kg 110
seamless waterproofing of sanitary areas like bathrooms,
showers etc. It can be applied by roller or spatula on concrete,
plaster, gypsum-board, chipboard etc.
Color: Grey.

Consumption:
Elastomeric liquid
1,0-1,5 kg/m2, depending on the nature of the substrate.
membrane for
waterproofing under tiles
AQUAMAT-F Aqueous silicate solution used against rising damp on walls *170 kg 3
0215/1 made of concrete or masonry. It can be applied either by
25 kg 26
impregnation or by a borehole procedure.
6 kg 4 72
Color: Transparent.

Consumption:
By boreholes: Approx. 18 kg/m2 of wall's cross-section.
By impregnation: 200-300 g/m2 of wall’s surface.
Damp course against
capillary rising damp


1.4 Complementary Waterproofing Products - Reinforcements
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX

FIBERGLASS MESH 100 cm wide mesh Roll
made of fibreglass, for total reinforcing of waterproofing layers 1 m x 50 m
FOR (e.g. ISOFLEX membrane) in tough cases of multiple cracking.
WATERPROOFING (50 m2)
Weight: approx. 65 g/m2.
LAYERS Mesh: 1,0 mm x 2,0 mm.
1205/1 Roll
10 cm wide tape 10 cm x 50 m 20
made of the same material as above, used for the local
reinforcing of ISOFLEX membrane along cracks or joints.

TREVIRA Thin polyester cloth Roll
1203/1 of 30 g/m2, used for reinforcing of waterproofing layers such
1 m x 100 m
as ISOFLEX, AQUAMAT-ELASTIC etc.
(100 m2)
10 cm wide tape
made of the same material as above, used for the local 1 m x 200 m
reinforcing of waterproofing layers along cracks, joints or (200 m2)
wall-floor junctions.
Polyester cloth for
Roll
reinforcing waterproofing
layers 10 cm x 50 m 20
11

Complementary Waterproofing Products - Reinforcements

WATERPROOFING Special parts made of thermoplastic elastomer for
waterproofing of moistured places.
MATERIALS FOR
MOISTURED PLACES
0630/1

Roll
Joint sealing tape. 12 cm x 50 m 1
Roll
12 cm x 10 m 1

Inner corner. 14 cm x 14 cm 25

Outer corner. 21 cm x 21cm 25

Wall sealings. 12 cm x 12 cm 25

Bottom sealings. 42,5 cm x 42,5 cm 10

ISOMAT BUTYL TAPE Self-adhesive butyl tape coated with non-woven polypropylene. Roll
0719/1 Used in wet areas for waterproofing under tiles, especially in 8 cm x 10 m 60
places where there are cracks, joints etc. It can be covered
with tile adhesives or brushable waterproofing materials.

Thickness: 0,9 mm
Self adhesive butyl tape

12

Complementary Waterproofing Products - Reinforcements
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.

WATERPROOFING Suitable for waterproofing and uncoupling of sound and Roll
& UNCOUPLING problematics substrates. Especially used in damp areas and on 1 m x 15 m 28
terraces, balconies etc. It can be placed on walls or floors and
MEMBRANE on a variety of substrates such as concrete, cement mortars,
0719/1
old tile layers, mosaics, masonry etc.

1.5 Waterproofing Materials for Joints

TIXOPHALTE Ready-to-use, cold-applied elastoplastic adhesive bituminous Black
0624/6 mastic sealant. Possesses superior permanent flexibility and
310 ml 24 1.440
excellent adhesion to all kinds of materials under various
conditions, even underwater.
Color: Black.

Consumption:
Approx.1,4 kg/lit of joint volume.
Elastoplastic & adhesive
bituminous mastic sealant

ELASTOTAN Elastomeric sealing and adhesive mastic with exceptional Grey
0607/6 adhesion to all building materials e.g. glass, aluminium, wood,
600 ml 15
PVC etc. It features high mechanical strength and resistance to
280 ml 25 1.125
ageing and weather conditions. Suitable for sealing joints 3 to
50 mm wide.
Color: White, grey. White
Consumption: 600 ml 15
Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. 280 ml 25 1.125
Elastomeric adhesive Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
mastic sealant
DOMOSIL High performance, general-purpose silicone sealant for sealing Transparent
0623/6 joints 3 to 40 mm wide, on surfaces of non-porous materials 280 ml 25 1.125
such as glass, aluminum, porcelain (e.g. tiles), ceramic etc.
It cannot be overpainted.
White
Color: Transparent, white.
280 ml 25 1.125
Consumption:
Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.
General-purpose silicone
sealant
13

Waterproofing Materials for Joints

DOMOSIL-S High performance, mildew resistant silicone sealant for sealing Transparent
0622/6 joints 3 to 40 mm wide, on surfaces of non-porous materials 280 ml 25 1.125
Also suitable for applications in high moisture sanitary areas
such as bathrooms and kitchens, as well as in hospital areas, White
laboratories etc. Prevents fungi development that creates stains 280 ml 25 1.125
and black spots. It is not recommended for aquariums since it
contains fungicide. It cannot be overpainted.
Mildew-resistant silicone Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint
sealant length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
DOMOSIL-MICRO High performance, anti-mould silicone sealant with built-in Transparent
0622/6 Microban® antibacterial protection technology. Remains color 280 ml 12 900
stable even after 10 years. Appropriate for sealing joints of 3-
40mm wide in non-porous materials such as glass, aluminium,
White
porcelain and non-porous ceramics. It is applied in high
humidity areas such as kitchens, bathrooms, etc. It is not 280 ml 12 900
recommended for use in aquariums and cannot be overpainted.
Anti-mould silicone
Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint
sealant with built in
length. Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
Microban® technology
DOMOSIL-POOL Silicone sealant resistant to permanent water immersion such Transparent
0622/6 as swimming pools, aquariums etc. Appropriate for sealing 280 ml 25 1.125
vertical or horizontal joints 3-40mm wide, for indoor and
outdoor applications. It has very good adhesion on surfaces
such as glass, porcelain, aluminium, ceramics etc. Suitable for
sealing joints on boats, glass- structures etc. It cannot be
overpainted. Color: transparent.
Silicone sealant for Consumption:
permanent water Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
mmersion Joint 5mm x 5mm: 1 cartridge/12 m of joint length.

FLEX PU-20 One-component, solvent-free polyurethane sealing mastic. Ideal Grey
0627/6 for sealing joints where high elasticity is required. Suitable for 600 ml 20 1.000
joints in concrete, brickwork, natural and synthetic stones, steel,
310 ml 12 1.560
aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor
and indoor applications.
Color: Grey, white. White
600 ml 20 1.000
Consumption:
Polyurethane construction Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.
joint sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.

FLEX PU-40 One-component, solvent-free polyurethane sealing and adhesive Grey
0626/6 mastic. Exceptional adhesion to all building materials, e.g. 600 ml 20 1.000
concrete, brickwork, natural and synthetic stones, steel,
310 ml 12 1.560
and indoor applications. White
Color: White, grey, brown. 600 ml 20 1.000
310 ml 12 1.560
Consumption: Brown
Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. 600 ml 20 1.000
Polyurethane adhesive
and sealant 310 ml 12 1.560
14

Roofing Membranes

FLEX PU-30 S One-component, polyurethane sealing mastic with solvents. Grey
0626/6 Ideal for sealing joints where high elasticity is required. Suitable 600 ml 15 750
NEW for joints 5-50mm wide in concrete, brickwork, natural and 310 ml 25 1500
synthetic stones, steel, aluminium, wood, ceramic tiles etc. For
outdoor and indoor applications.
600 ml 15 750
Consumption: 310 ml 25 1500
Polyurethane sealant Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
Joint 5mm x 5mm: 1 cartridge /12 m of joint length.

FLEX PU-50 S One-component, polyurethane sealing and adhesive mastic with Grey
0626/6 solvents. Exceptional adhesion to all building materials, e.g. 600 ml 15 750
NEW concrete, brickwork, natural and synthetic stones, steel, 310 ml 25 1500
aluminium, wood, ceramic tiles etc. Suitable for joints 5-30mm
wide. For outdoor and indoor applications.
White
Color: Grey, white.
600 ml 15 750
Polyurethane adhesive Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
and sealant Joint 5mm x 5mm: 1 cartridge /12 m of joint length.

FLEX PU-2K Two-component joint sealant based on polyurethane resins. 5 kg 4(A) 27(A)
0633/6 Ideal for sealing horizontal and vertical concrete joints in floors (A+B) 6(B) 18(B)
NEW and structures like reservoirs, canals etc.
Available in two types:
FLEX PU-2KV: For vertical surfaces.
FLEX PU-2KH: For horizontal surfaces
Color: Grey

2-component Consumption: 1,45 kg/lit of joint volume
polyurethane joint sealant

FLEX MS-45 Elastomeric sealing and adhesive mastic with excellent bonding Grey
0629/6 to any kind of building material such as glass, aluminium, wood, 280 ml 25 1.125
PVC etc. It features high mechanical strength and great
endurance to ageing. It is also suitable for slightly wet
substrates. It is used for strong, elastic adhesions. Redbrown
Color: Grey, redbrown. 280 ml 25 1.125

Consumption:
Elastomeric adhesive Indicative consumption: 1 cartridge /10 linear meters.
and sealant

WATERSTOP 1520 Tape made of special treated bentonite and caoutchouc. Roll
0625/6 Suitable for sealing and waterproofing work joints in concrete 30 m/box
30
elements (e.g. work joints between concrete slab and concrete
wall).
Dimensions: 15 mm x 20 mm.

Swelling bentonite tape

15

1.6 Roofing Membranes

DELTA-FOL PVG Roofing membrane placed underneath the tile-bearing laths. Roll
0701/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 25
possesses great mechanical strength and it is easily applied 2
due to its light weight (approx. 14,5 kg/roll). (75 m )
It is ideal for application in ventilated roofs with sheathing.

Roofing membrane for
ventilated roofs

DELTA-FOL PVE Roofing membrane placed underneath the tile-bearing laths. Roll
0715/4 Provides complete waterproofing, allows breathing of the roof,
1,5 m x 50 m 32
possesses great mechanical strength and it is easily applied
due to its light weight (approx. 12,5 kg/roll). (75 m2)
It is ideal for application in ventilated roofs with sheathing.

ventilated roofs
DELTA-VENT S Waterproofing polypropylene roof membrane which is placed Roll
0716/4 underneath the tile-bearing laths. Provides complete
1,5 m x 50 m 25
waterproofing, possesses exceptional vapour-permeability and 2
great mechanical strength and it is easily laid due to its light (75 m )
weight (approx. 10,5 kg/roll).
It is ideal for application in non-ventilated roofs with or without
sheathing.

non-ventilated roofs
DELTA-VENT N Waterproofing polypropylene roof membrane which is placed Roll
0716/4 underneath the tile-bearing laths. Provides complete 1,5 m x 50 m 32
waterproofing, possesses exceptional vapour-permeability and 2
great mechanical strength and it can be easily laid due to its light (75 m )
weight (approx. 9 kg/roll).
It is ideal for application in non-ventilated roofs without
sheathing.

non-ventilated roofs
DRAGOFOL Roofing membrane placed underneath the tile-bearing laths. Roll
It is ideal for application in ventilated roofs without sheathing.

White roofing membrane
for ventilated roofs
16

Roofing Membranes

DELTA-FOL LP Roofing membrane placed underneath the tile-bearing laths. Roll
It is ideal for application in ventilated roofs without sheathing.

Transparent roofing
membrane for ventilated
roofs
ROOF-TOP Bituminous roofing membrane placed underneath the tile- Roll
0704/4
bearing laths. Provides complete waterproofing and possesses
1 m x 30 m
great mechanical strength. Bears polyester reinforcement and
double cover of perforated polyethylene film. (30 m2)
ROOF-TOP 800 30
Roll weight: approx. 24 kg.
ROOF-TOP 600 36
Roll weight: approx. 18 kg.
Bituminous roofing
membrane


ISOMAT BUTYL TAPE ALU Self-adhesive butyl tape coated with aluminum. Mainly used Roll
0719/4 for waterproofing and sealing on roofs and terraces, in places 10 cm x 10 m 60
such as chimney-roof assemblies, roof vents etc. Suitable for
repairs on roof tiles, sealing joints on the top of the roof etc.

Thickness: 0,6 mm
Self adhesive butyl tape
with aluminum coating

1.7 Drainage Membranes

DELTA-NB Drainage membrane made of high density polyethylen Roll
0918/5 0,5 mm thick, with dimples 8,0 mm high. 2 m x 20 m 15
(40 m2)

17

Drainage Membranes

DELTA-MS Drainage membrane made of high density polyethylen Roll
0919/5 0,6 mm thick, with dimples 8,0 mm high. 2 m x 20 m 11
(40 m2)

DELTA-NP-DRAIN Drainage membrane made of high density polyethylene Roll
0910/5 0,6 mm thick, with dimples 8,0 mm high and polypropylene 2 m x 20 m 5
geotextile bonded to one side.
(40 m2)

DELTA-FLORAXX Drainage membrane of high density polyethylene with octagonal Roll
0913/5 shape dimples of 20 mm height. Suitable for garden roofs.
2 m x 20 m 6
(40 m2)

Drainage membrane

DELTA-FLORAXX TOP Drainage membrane of high density polyethylene with octagonal Roll
0913/5 shape dimples of 20 mm height and attached polypropylene
2 m x 10 m 12
geotextile. Suitable for garden roofs.
(20 m2)

Drainage membrane

DELTA Special termination bars used to cover the top edge of DELTA 20 ps./box
drainage membranes in vertical applications.
TERMINATION BARS Bar length: 2 m.
0905/5

18

Drainage Membranes

DELTA SCREWS Used for the montage of DELTA drainage membranes as plugs 100 ps./box
0907/5 or, in inverse, as bradawls bonded with their self-adhesive
head to the substrate.

DELTA WASHERS They are applied to the dimples of DELTA drainage membranes 100 ps./bag
0908/5 in points where the membrane is screwed, allowing secure
installation without tearing.

19


20

2. Concrete & Mortar
Additives

2.1 Concrete
Additives
2.2 Mortar
Additives
2.3 Auxiliary
Concreting Agents

21

2.1 Concrete Additives

PLASTIPROOF Plasticizer-waterproofing admixture (ASTM C-494, type A, *1000 kg
0120/1 ELOT EN 934-2:T2 & T9). Used for formulating concrete with 240 kg 2
low water permeability and improved physical properties.
20 kg 39
Color: Dark brown.
5 kg 4 72
Consumption:
Plasticizer, type A -
admixture

BEVETOL-RD Concrete setting retarder - concrete superplasticizer *1000 kg
0129/1 (ASTM C-494: Type A, D and G, ELOT EN 934-2:T11.1 &
250 kg 2
T11.2). When added to the ready-mixed concrete improves
20 kg 39
its workability and increases its setting time. Suitable for
formulating high strength concrete, exposed concrete, pumpable
concrete etc.
Color: Dark brown.

Concrete setting retarder Consumption:
and concrete 0,2-0,8 kg per 100 kg of cement.
superplasticizer, type G
BEVETOL-SPL Concrete superplasticizer (ASTM C-494, type A, D & G, ELOT *1000 kg
0111/1 EN 934-2:T11.1 and T11.2). When added to ready-mixed
250 kg 2
concrete, increases workability without decreasing strength.
20 kg 39
When added during concrete preparation, reduces the amount
of water required (reduction of w/c ratio) thus increasing 5 kg 4 72
strength. Color: Dark brown.

Concrete superplasticizer, Consumption:
type G As superplasticizer (Type G): 0,6-0,8 kg per 100 kg of cement.
At smaller dosages acts as plasticizer.

REOTOL-SPL Concrete superplasticizer (ASTM C-494, type A & F, ELOT EN *1000 kg
0121/1 934-2:T3.1 and T3.2). When added to ready-mixed concrete, 240 kg 2
increases workability without decreasing strength. When added
20 kg 39
during concrete preparation, reduces the amount of water
required (reduction of w/c ratio) thus increasing strength.
Color: Dark brown.

Concrete superplasticizer, Consumption:
type F As superplasticizer (Type F): 0,2-1,4 kg per 100 kg of cement.
At smaller dosages acts as plasticizer.

ADIUM 110 Liquid polycarboxylic-based admixture acting as concrete *1000 kg
0128/1 superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. *220 kg 2
When added during preparation of concrete, reduces water
20 kg 39
demand up to 20%. When added to the ready-mixed concrete
improves significantly its workability (fluid concrete), without
need of additional water.
Color: Light brown.
Broad-use new generation
concrete superplasticizer Consumption:

22

Concrete Additives

ADIUM 130 Liquid polycarboxylic-based admixture acting as as concrete *1000 kg
20 kg 39
improves significantly its workability (self-compacting concrete)
without need of additional water. Ideal for long-distance
delivery of ready-mixed concrete when long slump retention
New generation and workability is required. Color: Dark brown.
superplasticizer for long- Consumption:
distance delivery of 0,35-0,70 kg per 100 kg of cement.
concrete
ADIUM 132 Liquid polycarboxylic-based admixture acting as as concrete *1000 kg
NEW When added during preparation of concrete, reduces water 20 kg 39
improves significantly its workability (self-compacting concrete)
without need of additional water. Ideal for long-distance
delivery of ready-mixed concrete when long slump retention
New generation
and workability is required. Color: Brown.
superplastisizer for
Consumption:
concrete with extended
slump retention.
NEW When added during preparation of concrete, reduces water
20 kg 39
improves significantly its workability (self-compacting
concrete), without need of additional water. Ideal for precast
concrete elements.
New generation Color: Brown.
superplastisizer for
precast concrete Consumption: 0,30-0,70 kg per 100 kg of cement.
elements.
20 kg 39
improves significantly its workability (self-compacting concrete),
without need of additional water. Ideal for precast concrete
elements.
New generation Color: Dark brown.
superplasticizer for
precast concrete Consumption: 0,20-0,50 kg per 100 kg of cement.
elements
BEVETOL-VZ Concrete setting retarder (ASTM C-494, type B, ELOT EN *250 kg 2
0112/1 934-2:T8). Increases setting time of concrete (delays setting) 20 kg 39
and improves its workability and its physical properties.
Enables delivery of ready-mixed concrete to longer distances.
Color: Dark brown.

Consumption:
Concrete 0,2-0,4 kg per 100 kg of cement.
setting retarder

23

Concrete Additives

RETADOL Concrete setting retarder with plasticizing properties (ASTM C- *1000 kg
0122/1 494 type D, ELOT EN 934-2:T10). Increases setting time of *250 kg 2
concrete (delays setting) and improves its workability and its
20 kg 39
physical properties. Enables delivery of ready-mixed concrete
to longer distances.
Color: Dark brown.

Consumption:
Concrete setting retarder -
Plasticizer

ADINOL-RAPID Broad-use concrete setting accelerator-antifreezing agent 1400 kg
0124/1 (ELOT EN 934-2:T6). Reduces setting time of concrete 320 kg 2
(accelerates setting) in cases where fast work is required and
20 kg 39
allows safe concreting in low temperatures.
Color: Dark yellow. 5 kg 4 72

Consumption:
Broad-use concrete 1,0-2,0 kg per 100 kg of cement depending on the desired
setting accelerator - setting time.
Antifreezing agent

ADINOL-RAPID 2H Hardening accelerator for concrete (ELOT EN 934-2:T7). 1400 kg
0124/1 It accelerates the process of growth of initial strength of 290 kg 2
concrete without affecting negatively the final strength. It 20 kg 39
contributes to the fast abstraction of formwork facilitating thus
5 kg 4 72
the fast casting.
Color: Dark yellow.

Hardening accelerator Consumption:
for concrete 1,0-2,0 kg per 100 kg of cement, depending on the desired
result.

AQUAMAT ADMIX Concrete waterproofing admixture in powder form that is added 20 kg 54
0317/1 during concrete preparation forming insoluble crystalline
NEW compounds. Improves resistance to water permeability and does
not affect vapor permeability of concrete. It remains
permanently active and receives equally well positive and
negative hydrostatic pressure. Suitable for waterproofing
foundations, basements, tanks, wastewater treatment,
swimming pools etc. Color: Grey.
admixture with
Consumption: 0,8-1,2 kg per 100 kg of cement.


24

2.2 Mortar Additives

DOMOLIT Mortar plasticizer and setting retarder. Replaces lime. 220 kg 2
0103/1 Color: Dark brown. 20 kg 39
5 kg 4 72
Consumption:
For masonry and paving mortars: 50 g per 25 kg of cement. 1 kg 12 324
For plastering mortars: 75 g per 25 kg of cement.

Mortar plasticizer - Lime
replacement

DOMOLIT-TR Colorless mortar plasticizer and setting retarder. Replaces lime. *220 kg 2
0103/1 20 kg 39
Consumption:
5 kg 4 72
For masonry and paving mortars: 50 g per 25 kg of cement.
Plastering mortars: 75 g per 25 kg of cement. 1 kg 12 324

Transparent mortar
plasticizer - Lime
replacement
ASOLIT-POWDER Mortar plasticizer in powder form. Replaces lime. 30 kg 45
0125/1 Color: Beige.

Consumption:
2,0-5,0 kg per mixer batch of half a bag (25 kg) of cement.

Mortar plasticizer in
powder form - Lime
replacement
ADINOL-DM Waterproofing admixture for mortars and non reinforced 220 kg 2
0110/1 concrete with plasticizing properties. It is used for water- 20 kg 39
impermeable cement mortars, non-reinforced concrete, 5 kg 4 72
plasters etc.
1 kg 12 324
Color: Dark yellow.

Consumption:
Waterproofing admixture Cement mortars: 1 kg per 100 kg of cement.
for mortars and non Plastering mortars: 1 kg per 100 kg of cement+lime.
reinforced concrete Concrete: 0,8 kg per 100 kg of cement.

ADIFLEX-B Polymer dispersion - Elastifying agent for waterproofing slurries 150 kg 3
0113/1 (when added to AQUAMAT or cement mortars) or cementitious 20 kg 39
tile adhesives (when added to Isomat AK 20, Isomat AK 10 10 kg 36
etc.). Replaces all or part of the mixing water. Necessary for
5 kg 4 72
applications on dimensionally unstable substrates, subject
to vibration or contraction-expansion. 1 kg 12 324
Color: White.
Consumption:
Elastifying agent
5-10 kg per 25 kg bag of AQUAMAT, Isomat AK 20, Isomat
AK 10 etc., depending on the desired elasticity.

25

Concrete & Mortar Additives
Mortar Additives

ADIPLAST Polymer latex (SBR). Improves the properties of mortars in 150 kg 3
0114/1 several ways offering, e.g. increased bonding to substrate and 20 kg 39
flexibility, shrinkage reduction, higher resistance to chemical 5 kg 4 72
effects and abrasion, enhanced water impermeability etc.
1 kg 12 324
Ideal for creating the bonding layer between old and new
concrete or mortar.
Color: White.
Consumption:
Polymer latex for multiple Added to the mixing water in proportion of ADIPLAST : water
improvements of mortars = 1:1 to 1:5.

LATEX Polymer latex. When added into the building mortars and 150 kg 3
0127/1 coatings, it increases bonding to the substrate, provides water 20 kg 39
impermeability and elasticity. It is suitable for creating bonding 5 kg 4 72
layers, repairing mortars, floor screeds resistant to abrasion,
1 kg 12 324
waterproof cement mortars, mortars resistant to chemicals,
plasters with high strength and water impermeability etc.
Color: White.
Latex admixture - Consumption:
Bonding Agent Added to the mixing water in proportion of LATEX:
water = 1:1 to 1:5.

DS-99 Additive for tile adhesives and joint grouts. Improves properties 20 kg 39
0116/1 such as bonding to substrate, abrasion resistance, water- 5 kg 4 72
impermeability.
1 kg 12 324
Color: White.

Consumption:
Added to the mixing water in proportion of DS-99 : water =
1:1 to 1:2.
Additive for tile adhesives
& joint grouts

2.3 Auxiliary Concreting Agents

SPLIT-2000 Deshuttering coating for all types of wooden or steel-faced *140 lit
0211/1 formwork.
20 lit 39
Color: Dark yellow.

Consumption:
Approx. 60 ml/m2.

Formwork deshuttering
agent

26

Auxiliary Concreting Agents

ISOCURE Paraffin-based, water emulsion for protecting fresh concrete 220 kg 2
0223/1 from quick evaporation of mixing water. It ensures the full 20 kg 39
hydration of cement, thus it reduces any drying shrinkage
cracks. It is usually applied on large surfaces of exposed
concrete such as industrial floorings, parking areas, concrete
slabs etc. In case of subsequent layers on the concrete surface,
ISOCURE must be removed by water blasting.
Concrete curing agent Color: Light yellow.
Consumption:
0,15-0,20 kg/m2, depending on application conditions.

ISOCURE-A Water-based, acrylic emulsion for protecting fresh concrete 220 kg 2
0223/1 from quick evaporation of mixing water. It ensures the full 20 kg 39
hydration of cement, thus it reduces any drying shrinkage
cracks. It is usually applied on large surfaces of exposed
concrete such as industrial floorings, parking areas, concrete
slabs etc. It is also suitable for vertical surfaces. There is no
need of removing ISOCURE- A in case of subsequent layers on
Acrylic based concrete the concrete surface. Color: White (transparent after drying).
curing agent Consumption: 0,15-0,20 kg/m2, depending on application
conditions.

POLYPROPYLENE Polypropylene fibers 12 mm long, for reinforcing of concrete Paper bag
and mortars.
FIBERS 900gr 14 784
1327/6
Consumption:
· 600-900 g/m of concrete.
3 Plastic bag
· 900-1200 g/m of mortar.
3
600gr 20 1.120


27

Concrete & Mortar Additives

28


3.1 Tile Adhesives
3.2 Tile Grouts
3.3 Adhesives for
Special Applications
3.4 Complementary Products

29

3.1 Tile Adhesives

ISOMAT AK 9 Cement-based tile adhesive. Suitable for fixing ceramic tiles on Grey
0553/3 walls or floors on surfaces made of concrete, brickwork, plaster 25 kg 54
etc. For indoor and outdoor applications.
It is classified as type C1 adhesive according to EN 12004.
White
Color: Grey, white.
25 kg 54
Consumption:
1,5-4,0 kg/m2.
Cement-based tile
adhesive C1
ISOMAT AK 10 Cement-based tile adhesive, with no vertical slip. Suitable for Grey
0501/3 fixing ceramic tiles on walls or floors on surfaces made of 25 kg 54
concrete, brickwork, plaster etc. For indoor and outdoor 5 kg 4 160
applications.
It is classified as type C1 T adhesive according to EN 12004.
25 kg 54
Cement-based tile 1,5-4,0 kg/m2.
adhesive, with no vertical
slip C1 T
ISOMAT AK 11 High performance, polymer-modified tile adhesive with Grey
0550/3 extended open time. Suitable for fixing ceramic and porcelain 25 kg 54
tiles on all common substrates, such as concrete, screeds,
brickwork, plaster etc. For indoor and outdoor applications, on
White
walls and floors.
It is classified as type C2 E adhesive according to EN 12004. 25 kg 54
Color: Grey, white.
High performance,
Consumption:
polymer-modified tile
1,5-4,0 kg/m2.
adhesive C2 E
ISOMAT AK 12 High performance, polymer-modified adhesive for ceramic and Grey
0552/3 porcelain tiles on critical substrates. It is characterized by 25 kg 54
extended open time and no vertical slip. Also suitable for fixing
tiles on common substrates such as concrete, screeds,
White
brickwork, plaster. For indoor and outdoor applications, on walls
and floors. It offers high initial and final adhesive strength and 25 kg 54
resistance to moisture. It is classified as type C2 TE adhesive
according to EN 12004.
High performance, Color: Grey, white.
polymer-modified tile
Consumption: 1,5-4,0 kg/m2.
adhesive C2 TE
ISOMAT AK 20 High performance, flexible, polymer-modified adhesive for Grey
0558/3 ceramic and porcelain tiles on critical substrates. It is 25 kg 54
characterized by extended open time, no vertical slip and
flex flexibility. Also suitable for fixing natural stone and decorative
5 kg 4 160
bricks, on concrete, screeds etc. Recommended for substrates
like old tile layers, floors with in-floor heating, swimming pools White
etc. For indoor and outdoor applications, on walls and floors. It is 25 kg 54
classified as type C2 TE S1 adhesive according to EN 12004 and 15 kg 90
High performance, EN 12002. Color: Grey, white. 5 kg 4 160
flexible, polymer-modified Consumption: 1,5-4,0 kg/m2.
tile adhesive C2 TE S1
30

Tile Adhesives

ISOMAT AK 22 High performance, flexible, polymer-modified adhesive for all Grey
0549/3 type of tiles on deformable substrates. It is characterized by 25 kg 54
extended open time, no vertical slip and high flexibility. Also
5 kg 4 160
suitable for fixing tiles on concrete, screeds, gypsum board, old
e xtra tile layers, floors with in-floor heating, swimming pools, metallic
flex surfaces etc. It is ideal for applications on deformable and White
flexible substrates. For indoor and outdoor applications, on walls 25 kg 54
and floors. It is classified as type C2 TE S1 adhesive according 15 kg 90
High performance, to EN 12004 and EN 12002. Color: Grey, white. 5 kg 4 160
flexible, polymer-modified Consumption: 1,5-4,0 kg/m2.
ISOMAT AK 25 High performance, elastic, polymer-modified adhesive for all type 25 kg 54
0582/3 of tiles on deformable and vibrative substrates. It is 5 kg 4 160
characterized by extended open time, no vertical slip and
elasticity. Also suitable for fixing tiles on concrete, screeds,
extra plaster, old tile layers, floors with in-floor heating, swimming
flex pools, metallic surfaces, etc. For indoor and outdoor applications,
on walls and floors. It is classified as type C2 TE S2 adhesive
according to EN 12004 and EN 12002.
High performance,
Color: White.
elastic, polymer-modified
Consumption: 1,5-4,0 kg/m2
ISOMAT AK-ECOLIGHT Light-weight, elastic adhesive, for ceramic and porcelain tiles, on 15 kg 54
0572/3 deformable substrates. It is characterized by extended open
time, no vertical slip and high elasticity. Also suitable for fixing
natural stone and decorative bricks, on concrete, screeds,
extra plaster etc. Ideal wherever elasticity and adhesion strength are
flex required like old tile layers, gypsum boards etc. For indoor and
outdoor applications, on walls and floors. It is classified as type
C2 TE S2 adhesive according to EN 12004 and EN 12002.
Light-weight, elastic tile Color: Grey.
adhesive C2 TE S2 Consumption: 1,0- 3,0 kg/m2.

ISOMAT AK-LIGHT Light-weight, flexible adhesive, for all type of tiles on 18 kg 54
0572/3 deformable substrates. It is characterized by extended open
time, no vertical slip and high flexibility. Also suitable for fixing
all type of tiles on concrete, screeds, plaster, old tile layers,
extra floors with in-floor heating, swimming pools, metallic surfaces
flex etc. For indoor and outdoor applications, on walls and floors. It is
classified as type C2 TE S1 adhesive according to EN 12004
and EN 12002.
Light-weight, flexible tile Color: White
adhesive C2 TE S1 Consumption: 1,0-3,0 kg/m2

ISOMAT AK-MEGARAPID Two-component, fast-setting, flexible tile adhesive. It is 33 kg 54(A)
0557/3 characterized by extended open time and flexibility. Suitable for (A+B) 54(B)
fixing ceramic and porcelain tiles, on concrete, screeds, plaster,
mosaic, gypsum boards, terraces, floors with in-floor heating,
swimming pools etc. Ideal for areas that must be ready for use
within short time. For indoor and outdoor applications, on walls
and floors. It is classified as type C2 FE S2 adhesive according to
EN 12004 and EN 12002. Package: 33 kg (25 kg A+8 kg B).
Two-component, fast- Color: White.
setting, flexible tile Consumption: 1,5-4,0 kg/m2
adhesive C2 FE S2
31

Tile Adhesives & Grouts
Tile Adhesives

ISOMAT AK-ELASTIC High performance, two-component elastic tile adhesive. It is 35 kg 54(A)
0562/3 characterized by extended open time and exceptional elasticity. (A+B) 54(B)
Suitable for fixing ceramic and mosaic tiles wherever elasticity
and adhesion strength are required like old tile layers, terraces,
swimming pools, floors with in-floor heating etc. For indoor and 7 kg 48
outdoor applications, on walls and floors. It is classified as type (A+B) (A+B)
C2 E S2 adhesive according to EN 12004 and EN 12002.
Packages: 35 kg (25 kg A+10 kg B) & 7 kg (5 kg A+2 kg B).
High performance, Color: White.
two-component elastic Consumption: 1,5-4,0 kg/m2.
tile adhesive C2 E S2
ISOMAT AK-RAPID Fast-setting, polymer modified cement-based tile adhesive. Grey
0557/3 Suitable for fixing absorptive or non-absorptive tiles on walls or 25 kg 54
floors on surfaces made of concrete, brickwork, plaster etc.
Ideal in cases where the surfaces have to be delivered fast for
White
use, e.g. work areas etc. It is qualified as non-slip (zero
slipping of the tile). For indoor and outdoor applications. It is 25 kg 54
classified as type C2 FT adhesive according to EN 12004. 5 kg 4 160
Color: Grey, white.
Fast-setting polymer
modified tile adhesive Consumption: 1,5-4,0 kg/m2.
C2 FT
ISOMAT AK-STONE Cement-based tile adhesive for thick layers (up to 15 mm). Grey
0556/3 Suitable for fixing tiles or natural stone on walls or floors on 25 kg 54
surfaces made of concrete, brickwork, plaster etc. Possesses
increased open time for application. For indoor and outdoor
applications. It is classified as type C1 E adhesive according to White
EN 12004. 25 kg 54
Color: Grey, white.

Coarse-grained tile and Consumption:
natural stone adhesive 2,0-8,0 kg/m2.
C1 E
ISOMAT AK-GRAND Coarse-grained, polymer modified, cement-based tile adhesive Grey
0543/3 for thick layers (up to 15 mm). Suitable for fixing and pointing 25 kg 54
decorative overlays (artificial stone, slate, decorative bricks
etc.) on walls or floors on various surfaces and especially
White
where high adhesion and moisture resistance are required.
Possesses increased open time for application. For indoor and 25 kg 54
outdoor applications. It is classified as type C2 E adhesive
according to EN 12004. Color: Grey, white, beige. Beige
Polymer modified tile
25 kg 54
adhesive for decorative Consumption: Fixing: 2,0-8,0 kg/m2. Pointing: 1,0-4,0 kg/m2.
overlays C2 E
ISOMAT AK-MARBLE Fast-setting, polymer modified, cement-based marble and 25 kg 54
0555/3 granite adhesive. Suitable for fixing marble or granite on walls
or floors on various surfaces and especially where high
adhesion and moisture resistance are required. Prevents
staining of sensitive overlays, such as marble layers, due to
fast retention of water. Possesses increased open time for
application. For indoor and outdoor applications. It is classified
as type C2 E adhesive according to EN 12004.
Polymer modified marble Color: White.
and granite adhesive C2 E Consumption: 1,5-6,0 kg/m2.

32

Tile Adhesives

ISOMAT AK-FLUX Polymer-modified, cement- based tile adhesive with increased 25 kg 54
0563/3 open time. After mixing with water, it attains fluid consistency.
Suitable for thick layers (up to 20mm). Fields of application:
Fixing absorptive and non-absorptive floor tiles on various
surfaces. Ideal for fixing large tiles by the full-bed laying method
and wherever the leveling and fixing of tiles on irregular
substrate is required. For indoor and outdoor applications. It is
classified as type C2 E according to EN 12004. Color: Grey.
Polymer-modified,
Consumption:
full-bed leveling tile
2,0-8,0 kg/m2
adhesive C2 E
ISOMAT AK-PRIMER Highly penetrative, polymer emulsion used as adhesion primer 20 kg 39
0574/3 on smooth, absorbent or non-absorbent substrates, before the 5 kg 4 72
application of cement based tile adhesives. 1 kg 12 324
Color: Light purple.

Consumption:
100-200 g/m2, depending on the absorptivity of the substrate.
Adhesion primer for tile
adhesives

UNI-PRIMER Ready-to-use acrylic water-based primer. Stabilizes weak, 20 kg 39
0209/1 loose or crumbling plasters. 5 kg 4 72
Color: White.
1 kg 12 324
Consumption:
100-200 g/m2.

Acrylic water-based
primer

MULTIFLEX Ready-to-use, pasty tile adhesive based on acrylic resins. It 25 kg 24
0517/3 provides high initial and final adhesive strength, high elasticity 5 kg 110
and moisture resistance. Ideal for minor repairs due to its fast
1 kg 22 264
and easy application. Fields of application: Suitable for fixing tiles
on surfaces such as concrete, plaster, gypsum-plaster, gypsum-
board, cement-board, wood etc. Also appropriate for areas with
high humidity such as bathrooms, kitchens, etc. It is used indoor
on walls and floors and outdoor on walls. It is classified as type
High performance,
D2T adhesive according to EN 12004. Color: White.
ready-to-use, pasty tile
Consumption: 1-3 kg/m2.
adhesive
ISOMAT AK 50 Two-component solvent-free epoxy adhesive. It is suitable for 10 kg 44
0575/3 fixing every type of tiles to several substrates, on walls or (A+B)
floorings. It has high adhesion strength and high chemical
resistance. It can also be used for pointing tile joints. 5 kg 110
It is classified as type R2T according to EN 12004.
(A+B)
Color: Light grey.

Consumption:
Two-component epoxy Approximately 1,75 kg/m2/mm.
tile adhesive

33

3.2 Tile Grouts
PRODUCT/CODE DESCRIPTION - APPLICATION COLOR PACKAG. PS/E.-PAL.

MULTIFILL Cement-based colored grout for pointing tile 01 White 5 kg 160
0511/3 joints on walls or floors, for indoor and 02 Black 4 bags/
outdoor applications.
03 Grey box
It is classified as type CG2 WA tile grout
04 Pearl grey
according to EN 13888.
05 Light Grey
It is available in 2 types: 06 Bahama Beige
07 Redbrown
· MULTIFILL 2-5, suitable for joint width 08 Brown
from 2 mm to 5 mm. 09 Light Brown
· MULTIFILL 3-15, suitable for joint width 10 Dark Grey
from 3 mm to 15 mm. 11 Ivory
0503/3 12 Purple
Consumption:
13 Red
0,2-2,0 kg/m2, depending on tile and joint
dimensions. 14 Cotto
15 Manhattan Grey
16 Light Ochre
17 Anemone
18 Pearl beige
Colored tile grout
classified as type 19 Mocha
CG2 WA 20 Maroon
21 Caramel
22 Magnolia
23 Oregon
24 Cinnamon
25 Crocus
26 Green
27 Orange
30 Cement Grey
31 Ceramic
32 Mykonos Blue
33 Yellow
34 Mint
35 Tropical Sea
36 Cypress

01 White 2 kg 300
02 Black 10 bags/
03 Grey box
04 Pearl grey
05 Light Grey
06 Bahama Beige
07 Redbrown
08 Brown
09 Light Brown
10 Dark Grey
11 Ivory
12 Purple
13 Red
14 Cotto
34

Tile Grouts

MULTIFILL 15 Manhattan Grey
16 Light Ochre
17 Anemone
18 Pearl beige
19 Mocha
20 Maroon
21 Caramel
22 Magnolia
23 Oregon
24 Cinnamon
25 Crocus
26 Green
27 Orange
30 Cement Grey
31 Ceramic
32 Mykonos Blue
33 Yellow
34 Mint
35 Tropical Sea
36 Cypress

01 White 25 kg 54
03 Grey
05 Light Grey
06 Bahama Beige
10 Dark Grey
MULTIFILL 2-5 is available in all 34 colors.
21 Caramel
MULTIFILL 3-15 is available only in colors
marked with an asterisk (*). 30 Cement Grey

MULTIFILL Fast-setting, polymer-modified cement-based 01 White 4 kg 160
RAPID 1-8 tile grout. It offers high mechanical strength, 03 Grey 4 bags/
0520/3 excellent color stability and high water- 05 Light Grey box
repellence. It gives smooth and glossy final
06 Bahama Beige
surface. Suitable for joint width up to 8 mm. It
is classified as type CG2 WA tile grout 10 Dark Grey
according to EN 13888. Used for grouting any 15 Manhattan Grey
kind of tiles on walls or floors, indoor or 17 Anemone
outdoor. 30 Cement Grey
Fast-setting, cement
based tile grout 2
Consumption: 0,2-2,0 kg/m , depending on
enriched with resins the size of the tiles and the width of the joint.

35

Tile Grouts

MULTIFILL MULTIFILL SMALTO 1-8 is a colored, polymer- 01 White 4 kg 160
SMALTO 1-8 modified, cement-based tile grout. It offers 02 Black 4 bags/
0511/3 high mechanical strength, superb color 03 Grey box
stability and great water-repellence. Contains 04 Pearl grey
special bacteriostatic agents, which block the
05 Light Grey
formation of bacteria on the grout. It gives a
smooth and glossy final surface. Suitable for 06 Bahama Beige
joint width from 1 mm to 8 mm. 07 Redbrown
It is classified as type CG2 WA tile grout 08 Brown
according to EN 13888. 09 Light Brown
Tile grout with porcelain 10 Dark Grey
effect, water-repellent Consumption: 11 Ivory
CG2 WA 0,2-2,0 kg/m2, depending on the tile 12 Purple
dimensions and the joint width. 13 Red
14 Cotto
15 Manhattan Grey
16 Light Ochre
17 Anemone
18 Pearl beige
19 Mocha
20 Maroon
21 Caramel
22 Magnolia
23 Oregon
24 Cinnamon
25 Crocus
26 Green
27 Orange
30 Cement Grey
31 Ceramic
32 Mykonos Blue
33 Yellow
34 Mint
35 Tropical Sea
36 Cypress

01 White *2 kg 110
02 Black
03 Grey
04 Pearl grey
05 Light Grey
06 Bahama Beige
07 Redbrown
08 Brown
09 Light Brown
10 Dark Grey
11 Ivory
12 Purple
13 Red
14 Cotto
36

Tile Grouts

MULTIFILL 15 Manhattan Grey
SMALTO 1-8 16 Light Ochre
0511/3 17 Anemone
18 Pearl beige
19 Mocha
20 Maroon
21 Caramel
22 Magnolia
23 Oregon
24 Cinnamon
25 Crocus
26 Green
27 Orange
30 Cement Grey
31 Ceramic
32 Mykonos Blue
33 Yellow
34 Mint
35 Tropical Sea
36 Cypress

01 White 20 kg 54
03 Grey
05 Light Grey
*The grout of 2 kg is packed in a plastic container. 06 Bahama Beige

MULTIFILL Colored, fine-grained, polymer-modified, 01 White 4 kg 160
cement-based grout. It offers high mechanical 02 Black 4 bags/
MARBLE 0-3 strength, superb color stability and great water-
0555/3 NEW 05 Light Grey box
repellence. Suitable for joint width up to 3 mm.
It is used for grouting marbles, granites, tiles, 06 Bahama Beige
glass and marble mosaic, on walls or floors, 17 Anemone
indoor or outdoor. It is classified as type CG2
WA grout according to EN 13888.

Grout for marbles Consumption:
0,2-1,3 kg/m2, depending on the size of
marbles and the joint width.

MULTIFILL-STONE Colored polymer-modified cement mortar for 01 White 25 kg 54
0556/3 building and grouting of natural or artificial 03 Grey
stone, on wall and floor. It provides high initial 06 Bahama Beige
and final adhesive strength, high mechanical
10 Dark Grey
properties and exceptional color stability.
16 Light Ochre
Suitable for joint width 5-40mm. Due to the
special particle size granulation of the product,
the mortar does not withdraw under the
weight of the masonry units. It is classified as
Colored cement mortar type M15 mortar for masonry according to
for the building and EN 998-2 and as type CG2 grout according to
grouting of stones EN 13888.

37

Tile Grouts

MULTIFILL-ELASTIC One-component, colored, elastic joint sealant. Used for Cartr.
0569/3 pointing tile joints on walls or floors, especially where high
280 ml 25 1.125
elasticity is required (expansion joints etc.). Suitable for indoor
and outdoor applications.
Color: White, light grey, grey, dark grey, anemone, bahama
beige, caramel.

Consumption:
Colored elastic Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
tile joint sealant

MULTIFILL-EPOXY Two-component solvent-free epoxy grout. It is applied where 10 kg 44
THIXO high mechanical and chemical resistance is required. It is (A+B)
0539/3 ideally combined with special tiles for industrial use. It is
suitable for pointing wall and floor tile joints in industrial areas,
5 kg 110
pools etc. It has excellent workability and it is easily cleaned
before hardening. It is classified as RG type grout according to (A+B)
standard EN 13888.
Colors: White, grey, light grey, black, bahama beige. Other 2 kg 140
Two-component colored
epoxy grout colors by special order (minimum quantity 300 kg). (A+B)

MULTIFILL-EPOXY Two-component solvent free epoxy grout for floors. It is applied 10 kg 44
FLOW where high mechanical and chemical resistance is required. It (A+B)
0538/3 can be ideally combined with special tiles for industrial use.
Due to its fluidity, it is suitable for pointing floor tile joints in
5 kg 110
industrial areas, pools etc. It has excellent workability and is
easily cleaned with water before hardening. It is classified as (A+B)
RG type grout according to standard EN 13888.
Two-component epoxy Color: Light grey. Other RAL colors by special order (minimum
grout for floorings quantity 300 kg).

MULTIFILL-EPOXY Two-component decorative, solvent-free epoxy grout. With the 2 kg 110
GLITTER addition of ISOMAT-GLITTER, a colored decorative grout with (A+B)
0540/3 particular aesthetic effect is created. It is applied where high
mechanical and chemical resistance is required. Ideally
combined with glass mosaic tiles and tiles with high chemical
resistance. Suitable for pointing wall or floor tile joints in
residences, clubs, shops, industrial sites etc. It is classified as
Decorative RG type grout according to standard EN 13888. Color: 10
Two-component epoxy selected.
2
grout Consumption: 0,1-4,0 kg/m .

ISOMAT GLITTER Colored metallic aggregates which when added to the epoxy 200 gr 20
0540/3 grout MULTIFILL-EPOXY GLITTER a colored, decorative grout
with particular aesthetic effect is created. ISOMAT-GLITTER is
added in a proportion of up to 10% by weight.
100 Silver, 110 Green,
120 Ôurquoise, 130 Violet,
140 Pink, 150 Red,
160 Red Brown, 170 Bronze,
180 Beige, 190 Gold

38

3.3 Adhesives for Special Applications

ISOMAT AK-T33 Cement-based adhesive for thermal insulation boards. Suitable 25 kg 54
0335/3 for fixing thermal insulation polystyrene boards on cement-
based substrates.
Color: Grey

Consumption:
3,0-4,0 kg/m².
Adhesive for thermal
insulation boards

ISOMAT AK-T35 Fiber-reinforced, polymer-modified, cement-based adhesive. It is Grey
0335/3 used in combination with the plasters MARMOCRET PLUS and 25 kg 54
MARMOCRYL, as a system for the external thermal insulation of
buildings. Suitable for fixing thermal insulation polystyrene
boards on cement-based substrates. Moreover, when reinforced White
with fiberglass mesh and applied on the exterior side of fixed 25 kg 54
thermal insulation boards, it constitutes an ideal substrate for
the subsequent plaster layer. Color: Grey, white.
Fiber-reinforced Consumption: As adhesive: 3-4 kg/m². As a reinforced mortar:
adhesive for thermal approx. 1,5 kg/m²/mm.
insulation boards
ISOMAT AK-T55 Fiber-reinforced, polymer-modified cement-based adhesive. It is Grey
0335/3 used in combination with the plasters MARMOCRET PLUS and 25 kg 54
MARMOCRYL, as a system for the external thermal insulation of
buildings. Suitable for fixing thermal insulation polystyrene
boards on cement-based substrates. Moreover, when reinforced White
with fiberglass mesh and applied on the exterior side of fixed 25 kg 54
the subsequent layer of plaster. Color: Grey, white.
Fiber-reinforced adhesive Consumption: As adhesive: 3-4 kg/m². As a reinforced mortar:
for thermal insulation approx. 1,5 kg/m²/mm.
boards
ISOMAT AK-T65 Polymer-modified, cement-based adhesive. It is used in 25 kg 54
0335/3 combination with the plasters MARMOCRET PLUS and
NEW MARMOCRYL SILICONE as a system for the external thermal
insulation of buildings. Suitable for fixing mineral wool boards
on cement-based substrates. Moreover, when reinforced with
fiberglass mesh and applied on the exterior side of fixed mineral
wool boards, it constitutes an ideal substrate for the subsequent
layer of plaster. Color: Grey
2
Adhesive for mineral wool Consumption: As adhesive: 5 kg/m .
boards As a reinforced mortar: approx. 1,5 kg/m2/mm

ISOMAT AK-THERMO Fiber-reinforced, polymer-modified, cement-based non-slip 25 kg 54
0335/3 adhesive. Suitable for fixing thermal insulation polystyrene
boards on cement-based substrates. Moreover, when reinforced
with fiberglass mesh and applied on the exterior side of fixed
the subsequent MARMOCRET PLUS or MARMOCRYL layer.
Possesses increased open time. Color: White.
Consumption:
Fiber-reinforced As an adhesive: 2,0-4,0 kg/m2.
adhesive for thermal As a reinforced mortar: 1,5 kg/m2/mm.
insulation boards
39

Adhesives for Special Applications

ISOMAT AK-THERMO Ready-to-use, pasty coating, based on acrylic resins. It provides 25 kg 24
high elasticity and moisture resistance. Ideal for the external
0335/3 ACRYL thermal insulation of buildings when applied in combination with
the organic plasters MARMOCRYL and MARMOCRYL-SILICONÅ.
When reinforced with fiberglass mesh and applied on the exterior
side of fixed thermal insulation boards, it constitutes an ideal
substrate for the subsequent organic plaster. Moreover, it can be
used as an adhesive for fixing thermal insulation boards on the
Acrylic, fiber-reinforced facade of buildings. Color: White
coating for thermal Consumption: As reinforced coat: approx. 3,0-4,0 kg/m².
insulation boards As adhesive: 2,0-5,0 kg/m².
ISOMAT AK-BLOCK High quality polymer modified cement-based adhesive. Used Grey
0544/3 for fixing aerated concrete elements. It possesses increased 25 kg 54
open time for application.
Color: Grey, White.
White
Consumption: 25 kg 54
Approx. 13 kg for building 1 m3 of aerated concrete wall.

Polymer modified
adhesive for aerated
concrete masonry
ISOMAT AK-FIRE Refractory cement-mortar for firebricks. Suitable for laying 25 kg 54
0571/3 and grouting all kinds of firebricks in areas where high 5 kg 4 160
temperatures are developed (fireplaces, wood ovens, stoves,
barbecues, chimneys etc.). It provides excellent resistance to
high temperatures and extensive temperature changes, high
initial and final adhesive strength and resistance to moisture.
Color: Grey.
Consumption:
Refractory mortar for Indicatively, for firebricks with dimensions 20x10x3 cm and
laying and grouting joint width 1 cm the consumption is about 5 kg/m2.
firebricks
ISOMAT AK-GLASS Polymer modified cement-based adhesive for glass-blocks. 25 kg 54
0324/3 Used for fixing and pointing glass-blocks. 5 kg 4 160
Color: White.

Consumption:
Approx. 13 kg for building 1 m2 of wall with ordinary glass
blocks.

Polymer modified
adhesive for fixing and
pointing glass-blocks
ISOMAT MT 200 Pre-mixed, cement-based mortar for fixing marbles. It is used 25 kg 54
0577/3 only with the addition of water. It simplifies and accelerates the
applications.
Color: White.

Consumption:
Approx. 15 kg/m2/cm.

Pre-mixed, cement-based
mortar for marbles
40


ISOMAT AK-EPOXY
ÕÁËÏÐËÅÃÌÁ Two-component solvent-free epoxy adhesive. Suitable for fixing 20 lit 22
NORMAL marbles, granites and most of the building materials to several (A+B) (A+B)
0573/3 substrates, on walls or floors. After hardening it has great
chemical resistance and high compressive strength.
4 lit 70
Easy to use due to the simple mixing proportion of the two
components (A:B = 1:1 by volume) (A+B) (A+B)
Color: Light yellow.
1 lit 18
Two-component epoxy Consumption: (A+B) (A+B)
marble and granite Depends on the dimensions and weight of the bonded material.
adhesive
ISOMAT AK-EPOXY Two-component solvent-free epoxy adhesive. Suitable for fixing 20 lit 22
marbles, granites and most of the building materials to several (A+B) (A+B)
0573/3 substrates, on walls or floors. Suitable for fixing on vertical
surfaces due to its fast setting (7 minutes). After hardening it
4 lit 70
has great chemical resistance and high compressive strength.
Easy to use due to the simple mixing proportion of the two (A+B) (A+B)
components (A:B = 1:1 by volume).
Color: Grey-green. 1 lit 18
Two-component, fast-
Consumption: (A+B) (A+B)
setting epoxy marble and
Depends on the dimensions and weight of the bonded material.
granite adhesive
MONTAGE-S High quality pasty adhesive in a solvent solution. It is based on Cartr.
0630/3 caoutchouc and synthetic resins. It is used for fast and powerful 310 ml 25 1.200
bonding on almost all construction materials. No need for
drilling, screwing or nailing. Not suitable for bonding mirrors,
polystyrene insulation boards or other materials sensitive to
solvents. Color: Beige.

Consumption:
Pasty adhesive for fast Typical consumption: 1 cartridge/12 linear meters.
and powerful bonding

MONTAGE-W High quality solvent free adhesive based on acrylic emulsion. It Cartr.
0630/3 is used for fast and powerful bonding on all kinds of porous 310 ml 25 1.200
substrates, like wood, concrete, masonry, gypsum boards etc.
No need for drilling, screwing or nailing. Suitable for bonding
polystyrene insulation boards. Color: Aeige.

Consumption:
Solvent free pasty Typical consumption: 1 cartridge/12 linear meters.
adhesive for fast and
powerful bonding

ISOMAT AK-PARQUET High performance, one-component polyurethane adhesive for 12 kg/can 36
0631/3 wooden floorings. Suitable for fixing and bonding all types of
wooden floorings such as solid, lam parquet, strips, longstrips,
planks, on cementious floors, wooden floors, ceramic tiles,
marble, mosaic, metal surfaces, etc. Color: Beige.

Consumption:
1,2-1,4 kg/m2.
for wood floorings
41


SUPERBOND-PU High performance one-component polyurethane adhesive, White
0631/3 without solvents. It provides powerful bonding on all 280 ml 25 1.500
construction materials such as wood, concrete, aluminium,
tiles etc. It is also suitable for every wood construction and for
wood furniture industry. Color: White.

Consumption: Indicative consumption: 1 cartridge/12 linear
meters.
for powerful bonding

3.4 Complementary Products

UNCOUPLING Suitable for uncoupling of sound and problematics substrates. Roll
MEMBRANE Allows subsequent coverings to function as independent layers 1 m x 30 m 28
0719/3 in relation with the substrate. Suitable for indoor walls or floors
in a variety of substrates such as concrete, cement mortars, old
layers of tiles, mosaics, masonry etc.

WATERPROOFING Suitable for waterproofing and uncoupling of sound and Roll
& UNCOUPLING problematics substrates. Especially used in damp areas and on 1 m x 15 m 28
terraces, balconies etc. It can be placed on walls or floors and
MEMBRANE
0719/1 on a variety of substrates such as concrete, cement mortars,
old tile layers, mosaics, masonry etc.

42

4. Repairing Materials
& Paints

4.1 Strengthening
& Repairing
of Concrete
4.2 Construction
& Repairing
of Masonry Wall
4.3 Putties, Paints
& Protective Materials
4.4 Cleaning Agents
4.5 Elastic Joint Sealants
4.6 Bituminous Repairing
Materials

43

4. Repairing Materials & Paints
4.1 Strengthening & Repairing of Concrete
4.1.1 CEMENT-BASED MATERIALS

FERROSEAL Polymer-modified brushable cement mortar used for 25 kg 32
0331/1 protecting reinforcement elements from corrosion and for 15 kg 32
creating the bonding layer between old and new concrete or
5 kg 6 75
mortar.
Color: Redbrown. 1 kg 15 240

Consumption:
Cement-based As anticorrosive coating: 0,07-0,13 kg/m of reinforcement
anticorrosive coating for element.
reinforcement elements - As bonding agent: approx. 2,0 kg/m2.
Bonding agent
FERROSEAL-MCI Water-based emulsion with highly penetrating ability that acts 20 kg 39
0331/1 as a corrosion inhibitor of steel reinforcement. FERROSEAL-MCI 5 kg 4 72
penetrates the concrete and forms a protective layer on the 1 kg 12 324
surface of the reinforcing steel. Ideal for repairs of reinforced
concrete. Also suitable as an anticorrosive protection for
structures of reinforced concrete that are exposed on
aggressive environment such as bridges, aquaducts etc.
Color: Transparent.
Impregnation- corrossion
inhibitor Consumption: Approx. 0,5 kg/m2.

DUROCRET Polymer-modified cement mortar, suitable for patching and Grey
0310/1 repairing concrete, masonry and plaster, formation of grooves 25 kg 54
or ridgepoles etc.
5 kg 4 160
It is classified as PCC R2 mortar according to EN 1504-3.
Color: Grey, white, redbrown. White
25 kg 54
Approx. 15,0 kg/m2/cm. Redbrown
Groove formation: 1,9-2,7 kg/m. 25 kg 54
Polymer-modified cement
mortar 5 kg 4 160

DUROCRET-FAST Fast-setting, polymer-modified cement mortar. It provides high 25 kg 54
0310/1 adhesion to the substrate, excellent workability and abrasion
resistance. Suitable for repairing works on concrete, screeds,
masonry etc. Workability time: 45 minutes.
It is classified as PCC R2 mortar according to EN 1504-3.
Color: Grey.

Consumption:
Fast-setting, repairing Approx. 17 kg/m2/cm of layer thickness.
cement mortar For groove formation: 1.9-2.7 kg/m.

DUROCRET-DECO Polymer-modified, fiber-reinforced, cement mortar. It provides 25 kg 54
0310/1 excellent adhesion to the substrate, waterproofing and abrasion White
NEW resistance. For indoor and outdoor use in a variety of
Grey
applications, on floors and walls, wherever aesthetic
Light Grey
intervention is needed (e.g. Cycladic architecture) in homes,
shops, hotels etc. Suitable for special structures such as built-in Light Ochre
beds, built sanitary ware (sinks, bathtubs, showers etc.) Mocha
Colors: white, grey, light grey, mocha, crocus, light ochre. Crocus
Cement screed for
surface finishing on Consumption: Approx. 1,5 kg/m2/mm.
floors and walls
44

Strengthening and Repairing of Concrete
CEMENT-BASED MATERIALS

DUROCRET Repairing and waterproofing cement mortar. It is suitable for 25 kg 54
indoor and outdoor applications on concrete, brickwork, for
PENETRATE
0310/1 groove formation etc. Also it can be used for the waterproofing
of concrete elements, in cases from simple moisture to water
pressure. Suitable for waterproofing of basements, foundations,
manholes, water tanks, sewage tanks etc.
Color: Grey.
Consumption:
Repairing & waterproofing Approx. 17 kg/m2/cm of layer thickness.
cement mortar with For groove formation: 1.9-2.7 kg/m.
RAPICRET Fast-setting cement mortar for patching and repairing concrete 25 kg 54
0316/1 elements, fixing, anchoring, cavity sealing, formation of 5 kg 4 160
grooves etc. and generally when considerable strength and
fast work are needed.
It is classified as CC R3 mortar according to EN 1504-3.
Color: Grey.

Consumption:
Approx. 17,5 kg/m2/cm.
Fast-setting patching
mortar
MEGACRET-10 High-strength, fibre-reinforced, thixotropic, cementitious 25 kg 54
0334/1 repairing mortar. Suitable for highly demanding repairs of
concrete elements. It is applied in layers up to 10 mm thick
(per layer), by trowel or gunite machine.
Color: Grey.

Consumption:
High-strength fibre- Approx. 17,5 kg/m2/cm.
reinforced repairing
mortar
MEGACRET-40 High-strength, fibre-reinforced, cementitious repairing mortar. 25 kg 54
0322/1 Suitable for highly demanding repairs of concrete elements. It
5 kg 4 160
is applied in layers up to 40 mm thick (per layer), by trowel or
gunite machine.
Color: Grey.

Consumption:
High-strength fibre- Approx. 17,5 kg/m2/cm.
reinforced repairing
mortar
MEGACRET-40 FAST Fast setting, high strength, fibre-reinforced, cementitious 25 kg 54
0322/1 repairing mortar. Suitable for fast repairs on concrete elements.
NEW It is applied in layers up to 40 mm thick (per layer), by trowel or
gunite machine. It is classified as CC R4 mortar according to
EN 1504-3. Color: Grey.

Consumption:
Fast-setting, Approx. 17,5 kg/m2/cm.
fibre-reinforced,
high-strength cementitious
repairing mortar
45

Repairing Materials & Paints
CEMENT-BASED MATERIALS

MEGAGROUT-100 High-strength, non-shrinking, pourable cast grout for repairs 25 kg 54
0323/1 and strengthening. Suitable for concrete jacketing and filling of
cavities and cracks in concrete elements, in a thickness up
to 100 mm.
Color: Grey.

High-strength, non- Consumption:
shrinking pourable cast Approx. 21,5 kg/m2/cm or 2,1 kg for filling volume of 1 lit.
grout for repairs and
strengthening
MEGAGROUT-101 High-strength, non-shrinking pourable cast grout. Suitable for 25 kg 54
0329/1 machinery founding and tenancy, anchoring, precision
grouting of base plates of precision machinery installations.
Applied in a maximum thickness of 100 mm.
Color: Grey.

High-strength, non- Consumption:
shrinking pourable cast Approx. 21,5 kg/m2/cm or 2,1 kg for filling volume of 1 lit.
grout for precision
grouting of machinery

4.1.2 EPOXY-BASED MATERIALS

EPOMAX-STUCCO Two-component, epoxy putty, extra fine-graded. Ideal for 1 kg 18 216
0429/1 puttying any type of surfaces. It is also used for bonding (A+B) (A+B)
concrete, steel, stone, wood etc. as well as for restoring
damages on concrete and cement mortars. For limited
applications, mixing of less quantity of the components A and B
is possible, by keeping ratio 1:1 by volume.
Color: Grey.
Epoxy putty,
Two-component, Consumption:
extra-fine graded Approx. 1,35 kg/m2/mm thickness layer.

EPOMAX-EK Two-component epoxy putty. Used for bonding concrete and 4 kg 96
0421/1 steel, repairing concrete, filling joints and sealing (A+B) (A+B)
cracks that will be injected with EPOMAX-L10, EPOMAX-L20,
DUREBOND.
Color: Grey. 2 kg 6 96
(A+B) (A+B) (A+B)
Consumption:
Two-component
Approx. 1,85 kg/m2/mm. 1 kg 15 240
epoxy putty
(A+B) (A+B) (A+B)

46

EPOXY-BASED MATERIALS

EPOMAX-L20 Two-component, injectable, solvent-free epoxy resin. It is used 1 kg 15 180
0424/1 for resin injections in concrete elements with cracks 0,1-1 mm (A+B) (A+B) (A+B)
wide, ideal fixing and anchoring of reinforcement rods in
concrete elements etc. It can be perfectly applied even on
damp substrates.
Color: Transparent yellow.

Consumption:
Two-component, Approx. 1,1 kg for filling volume of 1 lit.
injectable epoxy resin for
cracks 0,1-1,0 mm wide
EPOMAX-L10 Two-component, injectable, solvent-free epoxy resin. It is used 3 kg 6 72
0418/1 for resin injections in concrete elements with cracks 0,5-3,0 mm (A+B) (A+B) (A+B)
wide, fixing and anchoring of reinforcement rods in concrete
elements etc. It can be perfectly applied even on damp
substrates. 1 kg 15 180
Color: Transparent yellow. (A+B) (A+B) (A+B)

Consumption:
Two-component, Approx. 1,1 kg for filling volume of 1 lit.
cracks 0,5-3,0 mm wide
DUREBOND Two-component, solvent-free epoxy resin, for bonding fresh 4 kg 6 72
0416/1 concrete to hardened concrete. Also used as injectable resin (A+B) (A+B) (A+B)
mortar for resin injections in concrete elements with cracks
3,0 mm wide or more, fixing and anchoring of reinforcement
1 kg 15 180
rods in concrete elements etc. It can be perfectly applied even
on damp substrates. (A+B) (A+B) (A+B)
Color: Grey.
Two-component,
Consumption:
As a bonding agent: approx. 0,6 kg/m2.
cracks > 3 mm wide.
Approx. 1,5 kg for filling volume of 1 lit.
Bonding agent
NOZZLES For the injection of EPOMAX-L10, EPOMAX-L20 and 100/ps.
DUREBOND epoxy resins into structural elements.
FOR EPOXY RESIN
INJECTIONS
1308/6

EPOMAX-ANCHOR Two-component polyester based anchoring adhesive. It does not Cartr.
0430/6 contain solvents and styrene. Suitable as an anchoring adhesive 300 ml 12 1.008
for reinforced bars, reinforced rods, threaded rods etc.
Color: Dark grey.

Consumption:
Depending on the application.
Fast curing anchoring
adhesive for
reinforcement rods
47

EPOXY-BASED MATERIALS

PLASTIC SLEEVE Plastic sleeve that is used in combination with EPOMAX-
ANCHOR for anchoring reinforcement roads to hollow-blocks.
FOR HOLLOW-BLOCKS
0430/6
Type: KSH 12 x 50 10 ps./box

4.1.3 FIBRE REINFORCED POLYMERS (F.R.P.)

EPOMAX-LD Two-component epoxy resin without solvents. Suitable for the 5 kg 72
1501/1 impregnation and bonding of synthetic fibre fabrics such as (A+B)
glass fibre or carbon fibre fabrics etc., Used for the
structural strengthening or repairing of construction elements
like concrete, masonry, wood etc.
Color: Grey.

Two-component, epoxy Consumption:
2
impregnation adhesive for 0,7-1,2 kg/m , depending on the application.
composite fabrics

MEGAWRAP-200 Fabric made of continuous unidirectional carbon fibres. Used Roll
1500/1 for the structural strengthening of construction elements. 60 cm x 50 m 20
2
(30 m )

Carbon fabric for
structural strengthening

EPOMAX-PL Two-component epoxy resin in pasty form. Suitable for bonding 5 kg 72
1502/1 carbon plates used in the structural strengthening of (A+B)
construction elements.

Consumption:
1,6-1,7 kg/m2/mm.

Two-component, epoxy
adhesive paste for
composite plates

48

FIBRE REINFORCED POLYMERS (F.R.P.)

MEGAPLATE High-strength carbon fibre plate used for structural Roll
1503/1 strengthening of construction elements. Industrial product 5 cm x 100 m
manufactured from epoxy resins and unidirectional carbon
5 cm x 50 m
fibres.
Plate thickness: 1,2 mm.
Roll
10 cm x 100 m
10 cm x 50 m
Carbon plates for
structural strengthening

4.2 Construction and Repairing of Masonry Wall

ISOMAT MT 80 Pre-mixed, cement-based mortar for masonry. It is used only 25 kg 54
0576/1 with the addition of water. It simplifies and accelerates the 15 kg 90
applications. Used on various types of building materials such
as bricks, blocks, aerated concrete blocks, stone, etc.
It is classified as type M5 mortar for masonry according to

Consumption:
Indicative consumption for bricks of dimensions
6x9x12 cm: 20 kg/m2 masonry.
mortar for masonry
ISOMAT MT-80 S Pre-mixed, cement-based mortar for masonry. Due to its special 25 kg 54
0576/1 formula it prevents the formation of salts on masonries which
are exposed to the weather conditions. It is used on various
types of building materials such as bricks, blocks, stone, etc.
EN 998-2.
Color: Grey.
Pre-mixed, cement-
based mortar for Consumption: Indicative consumption for bricks of dimensions
exposed masonry 6x9x12 cm: 20 kg/m2 of masonry.

UNICRET Mortar suitable for plastering and masonry works. Grey
0309/1 It is classified as type GP CS II W0 mortar according to 25 kg 54
EN 998-1.
Color: Grey, white.
White

Mortar for plastering and
masonry
49

Construction and Repairing of Masonry Wall

UNICRET-FAST Fast-setting white mortar, ideal for quick plaster repairs in old 25 kg 54
0325/1 and new constructions. Replaces the use of gypsum in 5 kg 4 160
respective applications.
It is classified as type GP CS I W0 mortar according to
EN 998-1.
Color: White.

Consumption:
Fast-setting, white
repairing mortar
DOMOLIT Mortar plasticizer and setting retarder. Replaces lime. 220 kg 2
0103/1 Color: Dark brown. 20 kg 39
5 kg 4 72
Consumption:
For masonry and paving mortars: 50 g per 25 kg of cement. 1 kg 12 324
For plastering mortars: 75 g per 25 kg of cement.

Mortar plasticizer - Lime
replacement

ASOLIT-POWDER Mortar plasticizer in powder form. Replaces lime. 30 kg 45
0125/1 Color: Beige.

Consumption:
2,0-5,0 kg per mixer batch of half a bag (25 kg) of cement.

Mortar plasticizer in
powder form - Lime
replacement

4.3 Putties, Paints & Protective Materials
4.3.1 PUTTIES

STUCCOCRET Spatula putty for smoothing and preparing wall surfaces to be 20 kg 54
0326/6 covered with paint or other coatings. Suitable for surfaces
10 kg 108
made of concrete or plaster. Replaces oil stuccos and other
4 kg 4 160
similar materials.
It is classified as type GP CS II W0 mortar according to
EN 998-1.
Color: White.

Consumption:
Spatula putty
Approx. 1,1 kg/m2/mm.

50

Putties, Paints & Protective Materials
PUTTIES

STUCCOCRET-PLUS Polymer-modified, cement-based putty. It is extra fine-graded 20 kg 54
0326/6 and suitable for smoothing and preparing interior wall surfaces
NEW to be covered with paint or other coatings. Suitable for surfaces
made of concrete or plaster. Replaces oil stuccos and other
similar materials. Due to its low weight it is easy to use and
covers up to 18% extra surface compared to the conventional
putties. It id classified as type GP CS II W0 mortar according to
EN 998-1. Color: White.
Polymer-modified spatula
Consumption: Approx. 0,9 kg/m2/mm.
putty
PLANFIX Polymer-modified cement putty for repairing and puttying Grey
0308/1 exposed concrete, fixing of pores or cavities etc.
25 kg 54
Color: Grey, white.
5 kg 4 160
Consumption:
Approx. 1,3 kg/m2/mm. White
25 kg 54

putty
PLANFIX-FINE Polymer-modified cement putty, extra fine-graded, for repairing Grey
0308/1 and puttying exposed concrete. It can be also applied using a 25 kg 54
gunite machine.
Color: Grey, white.
White
Approx. 1,3 kg/m2/mm. 5 kg 4 160

putty, extra fine-graded

PLANFIX-FINE Polymer modified cement putty, extra fine-graded, easily 25 kg 54
applicable, suitable for repairing and puttying exposed concrete,
PROFESSIONAL fixing of pores or cavities etc. Lightweight, it can be applied or
0308/1
NEW sanded easily and has little consumption. It can be applied using
a gunite machine. Classified as type PCC R1 mortar for concrete
repairs, according to EN 1504-3. Color: White.

Consumption:
putty, extra fine-graded
FLEX-COVER Two-component, flexible putty that consists of a cement-based 2,6 kg 110
0222/6 powder (component A) and a resin emulsion (component B). (A+B)
Suitable for sealing and waterproofing joints and cracks, on
walls or floors. It can be also used on window recesses,
junctions between floors and walls, as well as for puttying
surfaces with hair-cracks. To be applied on plaster, cement,
gypsum boards, wood etc. Ideal for outdoor applications.
Color: White.
Two-component, flexible
putty, for sealing joints Consumption: Joint 5 mm x 5 mm: 40 g/m of joint length.
and cracks Puttying: 1,6 kg/m2/mm.

51

PUTTIES

FAST-COVER Ready to use, lightweight acrylic putty for filling and 5 lit 90
0220/6 patching cracks and holes of any kind, in a single step. It is 1 lit 8 320
applied on plaster, gypsum board, wood etc. at a maximum
0,5 lit 16 576
thickness of 5 cm. It does not crack and it doesn’t need to be
rubbed. Painting follows after 30 minutes. For indoor and
outdoor application.
Color: White.

Ready-to use, lightweight
acrylic putty

GB-COVER Ready-to-use acrylic spatula putty. Suitable for stuccoing 20 kg 33
0219/6 (skim coat puttying) and pointing gypsum boards. Provides a 7 kg 60
new flat and smooth final surface, ready for priming and painting.
formula
Color: White.

Consumption:
2,0-3,0 kg/m2, depending on layer thickness.

Pasty acrylic gypsum-
board putty

JOINT-FILLER Polymer-modified, fibre-reinforced, cement-based joint 20 kg 54
0339/1 compound for cement boards. It features great flexibility, high
mechanical strength and superb adhesion to the substrate.
It can be applied and rubbed easily. It provides a smooth final
surface ready for any additional covering (paint, tiles etc.).
Color: Grey.

Consumption:
Joint compound for 100-150 gr per joint meter.
cement boards

CEMENT High-strength cement for preparing durable cement mortars. Grey
Color: Grey, white.
HIGH-STRENGTH 4 kg 4 160
0330/6

White
4 kg 4 160

52

4.3.2 EMULSION PAINTS & PRIMERS

ISOMAT CLASSIC High quality emulsion paint for interior use. It is characterized by White
0212/6 excellent surface coverage and workability as well as superb 10 lit 44
resistance to frequent washing and ageing. Provides strong
3 lit 4 110
adhesion to any kind of old or new substrate like plaster,
0,75 lit 12 360
concrete, gypsum boards etc. It gives a final surface with an
excellent mat finish. Ammonia free. NCS
Colors: White. Pallet
305 selected colors NCS pallet 10 lit 44
High quality emulsion (minimum order quantity 10 lit). 3 lit 4 110
paint for interior use Coverage: Approx. 12 m2 per liter. 1 lit 12 360

ISOMAT ÂÁÔÇ & KITCHEN High quality antimold emulsion paint for indoor use. Drastically White
0229/6 prevents mold and bacteria and is ideal for areas with high 10 lit 44
NEW concentration of moisture and vapors, such as kitchens,
3 lit 4 110
bathrooms, basements, ceilings etc. It has strong adhesion to
various substrates such as plaster, concrete, bricks, plaster wood 0,75 lit 12 360
etc. Ammonia free. It gives a uniform mat surface. NCS
High quality antimold (minimum order quantity 10 lit). 3 lit 4 110
emulsion paint Coverage: Approx. 12 m2 per liter. 1 lit 12 360

ISOMAT PROFESSIONAL Emulsion paint for interior use. It is recommended for use in White
CLASSIC areas, where frequent painting is required, such as in public 10 lit 44
0213/6 buildings, hotels, hospitals, schools, entertainment venues etc. It 3 lit 4 110
is characterized by great workability and surface coverage, as
well as high resistance to washing and ageing. Dries and can be
recoated rapidly. NCS
Emulsion paint for interior (minimum order quantity 10 lit). 3 lit 4 110
use Coverage: Approx. 12 m2 per liter.

FLEX-PRIMER
ISOMAT HYDROCHROMA Water-based emulsion paint for interior use. It is recommended White
0214/6 for use on new surfaces or surfaces already coated with water- 9 lit 44
based emulsion paint, where washing and soiling resistance are 3 lit 4 110
not required, such as in ceilings, storage rooms, staircases etc.
It is characterized by great workability and surface coverage.
Colors: White. NCS
205 selected colors NCS pallet Pallet
(minimum order quantity 9 lit). 9 lit 44
Water-based emulsion 3 lit 4 110
paint for interior use Coverage: Approx. 11 m2 per liter.

FLEX-PRIMER
PRIMER CLASSIC Acrylic, micronized, water based primer. It offers excellent 20 lit 39
0212/6 bonding. Suitable for use on new surfaces, such as plasters, 10 lit 60
concrete, bricks etc., that are going to be coated with emulsion 5 lit 4 72
paints. Thinning: Up to 50% with clean water. For highly
1 lit 12 54
absorbing substrates use it undiluted.
Color: Blue

Coverage:
Acrylic, micronized, About 10-15 m2 per liter, per layer.
water based primer
53

EMULSION PAINTS & PRIMERS

CL-MOLD Special cleaning fluid with antifungal activity. Cleans and 1 lit 12 324
1402/1 disinfects surfaces from mold, bacteria and algae. It may
NEW however be a precaution to prevent the occurrence of
microorganisms in high humidity situations. It is very effective
for cleaning surfaces such as walls, ceilings, natural stone,
brick, concrete, pools, etc. Furthermore, it can be used for
decontamination of fungi and maintain sanitary conditions in
places such as kitchens, restaurants, hotels, factories or
Antifungal cleaning fluid warehouses food, commercial ovens, etc.
Color: Blue.

4.3.3 ACRYLIC PAINTS & PRIMERS

ISOMAT ACRYL Çigh quality acrylic emulsion paint for exterior use. It is White
0205/6
characterized by high water-repellency, excellent surface coverage
10 lit 44
and durability in harsh weather conditions and ageing. It is also
vapor permeable allowing the building to breathe. Provides strong 3 lit 4 110
adhesion to any kind of old or new substrate like plaster, concrete, 0,75 lit 12 360
wood etc. It has an excellent workability and dries quickly. It gives NCS
a final surface with an excellent mat finish. Certified as cool paint
Pallet
Colors: White.
10 lit 44
305 selected colors NCS pallet
Çigh quality acrylic emulsion (minimum order quantity 10 lit). 3 lit 4 110
paint for exterior use 2
Coverage: Approx. 12 m per liter. 1 lit 12 360

ISOMAT SILICONE High quality new generation silicone paint for outdoor use. White
0230/6
Characterized by high water and vapor permeability and 10 lit 44
NEW excellent surface coverage. It shows strong adhesion to all types
3 lit 4 110
of new or old substrate, such as plaster, concrete, wood etc.
It is ideal for areas with high humidity and extreme weather
condition. It gives a uniform mat surface. NCS
(minimum order quantity 10 lit).
High quality silicone 2 3 lit 4 110
Coverage: Approx. 12 m per liter.
paint

FLEXCOAT Elastic, waterproofing paint. Offers total water impermeability White
0202/6 for the protection of walls against rain. It has high elasticity and 44
10 lit
crack bridging ability on surfaces that show hairline cracks.
3 lit 4 110
Suitable for painting and waterproofing walls, protecting of
bituminous layers etc. For exterior and interior use.
Colors: White. NCS
266 selected colors NCS pallet Pallet
(minimum order quantity 10 lit). 10 lit 44
High quality, elastic, 3 lit 4 110
Coverage: 8-12 m2 per liter.
waterproofing paint
54

ACRYLIC PAINTS & PRIMERS

ISOMAT PROFESSIONAL Acrylic emulsion paint for exterior use. It is recommended for White
new or old surfaces that require frequent painting, such as 10 lit 44
ACRYL public buildings, hotels, hospitals, schools as well as surfaces
0208/6 3 lit 4 110
that are tarnished by graffiti. It is characterized by great
workability and surface coverage, as well as high resistance to
ageing. Dries and can be recoated rapidly. NCS
266 selected colors NCS pallet (minimum order 10 lit 44
Acrylic emulsion paint quantity 10 lit). 3 lit 4 110
for exterior use Coverage: Approx. 12 m2 per liter.

5 kg 4 72
1 kg 12 324
MARMOCRYL. Color: White.

PRIMER ACRYL Silicone acrylic micronized water based primer. It offers 20 lit 39
0205/6 excellent bonding, high penetration as well as durability to 10 lit 60
alkaline surfaces. Protects from rising moisture and salts stains 5 lit 4 72
and stabilizes weak substrates. It is recommended for use on
1 lit 12 324
new or old external porous surfaces that are going to be covered
with paints or plasters. Thinning: Up to 50% with clean water.
For highly absorbing substrates use it undiluted.
Color: Light yellow
Silicone acrylic micronized
water based primer Coverage: About 10-15 m2 per liter, per layer.

PRIMER ACRYL-S Acrylic, solvent based primer. It offers excellent bonding and 15 lit 24
0208/6 high penetration. Penetrates and anchors to the substrate and 5 lit 4 72
stabilizes weak substrates. It is recommended for use on new 1 lit 12 288
or old porous surfaces that are going to be covered with paints
or plasters. It dries and is recoated rapidly.
Thinning: Up to 100% with SM-18. For highly absorbing
substrates use it undiluted.
Color: Transparent
Acrylic, solvent based
primer Coverage: About 10-15 m2 per liter, per layer.

SM-18 Special solvent used as a thinner of the primer PRIMER ACRYL-S 20 lit 39
1407/6 and to clean the tools after use. 5 lit 4 72
0,75 lit 12 324

Solvent for
PRIMER ACRYL-S
* Packages marked with an asterisk are available 3 days after reception of order. 55

4.3.4 ENAMEL PAINTS & PRIMERS

FLEX-PRIMER
ISOLAC ÁQUA Excellent new generation water-based quality enamel paint for
White
wood surfaces. Suitable for indoor and outdoor use.
satin Characterized by high elasticity, excellent coverage and 2,50 lit 4 140
0241/6 NEW 0,75 lit 12 360
outstanding resistance to weathering and aging. It offers strong
adhesion and is suitable for repainting surfaces coated with paint
or old water solvent enamels (enamel or oil paint). NCS
It gives a uniform satin surface. Pallet
Colors: White.
2,50 lit 4 140
Premium quality water 0,75 lit 12 360
(minimum order quantity 2,5 lit).
enamel. Satin surface
Coverage: Approx. 12 m2 per liter.
FLEX-PRIMER
ISOLAC ÁQUA Excellent new generation water-based quality enamel paint for
White
wood surfaces. Suitable for indoor and outdoor use.
gloss Characterized by high elasticity, excellent coverage and 2,50 lit 4 140
0240/6 NEW 0,75 lit 12 360
outstanding resistance to weathering and time. It offers strong
adhesion and is suitable for repainting surfaces coated with
paint or old water solvent enamels (enamel or oil paint). NCS
It gives a uniform glossy surface. Pallet
Colors: White.
2,50 lit 4 140
Premium quality water 0,75 lit 12 360
(minimum order quantity 2,5 lit).
enamel. Glossy surface
Coverage: Approx. 12 m2 per liter.
FLEX-PRIMER
ISOLAC PRIMER Acrylic water based primer for wooden surfaces. Suitable for 2,50 lit 4 140
áqua indoor and outdoor use. It provides excellent adhesion to the 0,75 lit 12 360
0240/6 NEW substrate and great coverage. Used in new or old wood surfaces
and is the ideal substrate for water-based enamel paint ISOLAC
AQUA. It is odorless and environmentally and user friendly.
Color: White.

Coverage:
Acrylic water based Approx. 12 m2 per liter.
primer for wooden
surfaces

4.3.5 EPOXY PAINTS & PRIMERS

EPOXYCOAT Two-component, solvent-based epoxy coating. Provides high 8 kg 39
0405/1 resistance to abrasion, chemical effects and weather conditions. (A+B) (A+B)
Color: RAL 9016 (white), RAL 7035 (light grey), RAL 7040
(grey), RAL 1015 (beige). Other RAL colors by order (minimum
quantity 120 kg).

Consumption:
200-300 g/m2/layer.
Two-component epoxy
coating

56

EPOXY PAINTS & PRIMERS

EPOXYCOAT-S Two-component, solvent-based, epoxy coating. Provides high 9,6 kg 39
0406/1 resistance to abrasion, chemical effects and weather conditions, (A+B) (A+B)
as well as enhanced flexibility. Ideal for the painting of swimming
pools.
Color: Blue of the pool, RAL 9003 (white). Other RAL colors by 2 kg 6 72
order (minimum quantity 144 kg). (A+B) (A+B) (A+B)

Consumption:
Two-component epoxy 200-300 g/m2/layer.
coating suitable for
swimming pools
EPOXYCOAT-W Two-component, water based epoxy coating. Especially suitable 9 kg 39
0420/1 for priming on wet or fresh (age < 28 days) concrete surfaces. (A+B) (A+B)
Provides high resistance to abrasion, chemical effects and
weather conditions.
Color: RAL 7035 (light grey), RAL 1015 (beige). 3 kg
Other RAL colors by order (minimum quantity 120 kg). (A+B)

Consumption:
Two-component, water- 200-300 g/m2/layer.
based epoxy coating

EPOXYCOAT-VSF Two-component, solvent-free epoxy coating. It offers high 10 kg 39
0406/1 hardness and abrasion resistance. It is specially designed for (A+B) (A+B)
aggressive chemical environments such as petroleum, high
acids, alkalis etc. 2 kg 6 72
Color: RAL 7032 (sand grey). Other RAL colors by special order (A+B) (A+B) (A+B)
(minimum quantity 120 kg).

Two-component, epoxy Consumption:
coating for aggressive 200-300 g/m2/layer.
chemical environments
EPOXYCOAT-AC Two-component, anticorrosive, solvent-based epoxy primer 8 kg 39
0413/1 for metal surfaces. Used alone as a final coat or as an (A+B) (A+B)
anticorrosive primer of EPOXYCOAT-W, EPOXYCOAT-VSF,
EPOXYCOAT and EPOXYCOAT-S.
Color: RAL 3009 (redbrown), RAL 7040 (grey). Other RAL 3 kg 6 72
colors by order (minimum quantity 120 kg). (A+B) (A+B) (A+B)

Consumption:
Two-component 150-200 g/m2/layer.
anticorrosive epoxy
coating
DUROFLOOR-BI Two-component, colorless, solvent-based epoxy resin. Used as 10 kg 48
0403/2 an impregnation on cement-based substrates to provide higher (A+B) (A+B)
stability and abrasion resistance. Prevents dust creation on
floor surface. Also, used as a primer for EPOXYCOAT-VSF,
EPOXYCOAT and EPOXYCOAT-S. 4 kg 105
(A+B) (A+B)
Two-component, Consumption:
colorless epoxy 150-250 g/m2/layer.
impregnation

57

EPOXY PAINTS & PRIMERS

SM-14 Thinner for the epoxy coatings EPOXYCOAT, EPOXYCOAT-S 5 lit 4 72
1407/1 and EPOXYCOAT-AC, and cleaner for tools used in applications
of the above epoxy materials.

Special solvent for epoxy
coatings

4.3.6 PROTECTIVE MATERIALS & VARNISHES

PS-20 Ready-to-use, silicone-based, transparent solution with 20 lit 24
(former PROTESIL) solvents for waterproofing. It ensures extremely high water- 3 lit 4 120
0207/1 repellence and long term protection. It can be applied on 1 lit 18 288
various surfaces (natural or synthetic stone, unpainted plaster,
exposed masonry, decorative bricks, roof tiles, tiles, exposed
concrete etc.) for their protection against rain effect.
Also suitable for waterproofing tile joints.
Color: Transparent
for waterproofing Consumption: 0,2-0,4 lit/m2.

PS-21 Ready-to-use, silicone-based solution without solvents for 20 lit 39
(former PROTESIL-W) waterproofing. It ensures extremely high water-repellence and 5 lit 4 72
0207/1 long term protection. It is suitable for waterproofing of tile joints 1 lit 12 324
and the protection against rain effect of various surfaces like
natural or synthetic stone, plaster, exposed masonry,
decorative bricks, roof tiles, tiles, unpolished marble, exposed
concrete etc.). It can be used even on slightly wet substrates.
Silicone-based solution Color: White (transparent after drying)
without solvents for
waterproofing Consumption: 0,2-0,4 lit/m2.

NANOPRO-C Water-based emulsion with high penetrating ability, based on 220 lit 2
0228/1 nano-molecular structure. Protects porous surfaces, from 20 lit 39
moisture and salt stains. Suitable for concrete, masonry, plaster, 5 lit 4 72
tile grouts, gypsum boards, chip boards, natural stones etc. For
1 lit 12 324
indoor and outdoor applications.

Consumption:
Nano-impregnation for 100-200 ml/m2, depending on the substrate's absorptivity.
protecting porous
surfaces
58

PROTECTIVE MATERIALS & VARNISHES

NANOPRO-M Water-based emulsion with highly penetrating ability based on 220 lit 2
0228/1 nano-molecular structure. Protects unporous surfaces, from 20 lit 39
moisture and salt stains. Suitable for polished marbles, granites, 5 lit 4 72
tiles, porcelain etc. For indoor and outdoor applications. 1 lit 12 324

Consumption:
50-70 ml/m2, depending on the substrate's absorptivity.
Nano-impregnation for
protecting marbles

NANOPRO-L Water-based emulsion with high penetrating ability, based on 20 lit 39
0228/1 nano-molecular structure. Protects porous and slightly porous 5 lit 4 72
surfaces (marbles, granites etc) from oil stains, moisture and 1 lit 12 324
salt stains and prevents from fungi-mould growth. Suitable for
concrete, masonry, plaster, tile grouts, gypsum boards, chip
boards, natural stones etc. For indoor and outdoor applications.
Nano-impregnation to Consumption:
protect surfaces against 50-100 ml/m2, depending on the substrate's absorptivity.
oils
VS-1 Ready-to-use, transparent acrylic varnish, used to impregnate 10 lit 56
0216/6 and brighten up natural stone (slate or sinter stone etc.) and 4 lit 4 72
artificial building materials (decorative bricks, roof tiles etc).
1 lit 12 288
VS-1 brings out the natural color of the material on which it is
applied, protecting at the same time the surfaces from the
influence of rainwater, weather effects and atmospheric
pollution. It is applied on walls and floors, in indoor or outdoor
Acrylic stone varnish areas.
Consumption: 150-200 ml/m2 per layer, depending on the
absorptivity of the surface.

ISOMAT AG 77 Brushable, paraffin-based emulsion. It protects surfaces from 3 lit 96
0221/6 several kinds of stains, such as spray or paint graffiti, 1 lit 8 320
environmental impurities etc. Permitting easy cleaning of the
surface, without affecting their structure appearance. It provides
great durability in time and weather effects. It can be applied on
painted or non-painted surfaces of concrete, plaster, stone,
metal etc.
Anti-graffiti protection
Consumption:
emulsion
50-100 ml/m2, depending on the absorptivity of the surface.

59

4.4 Cleaning Agents

CL-CLEAN Tile and natural stone cleaner. Removes lime residues, plaster, 20 kg 39
1402/1 cement etc. 5 kg 4 72
1 kg 12 324

Tile & natural stone
cleaner

SM-12 Thinner for epoxy products and cleaner of tools used in epoxy 5 lit 4 72
1401/1 system applications. Used in combination with Isomat AG 77
to clean surfaces from graffiti.

Special solvent for epoxy
systems

SM-16 Solvent used to dilute polyurethane coatings. Especially suitable 5 lit 4 72
1407/1 for diluting the brushable polyurethane waterproofing
membrane ISOFLEX-PU, when applied by spraying. It can also
clean tools used for the application of ISOFLEX-PU and also
tools from epoxy coatings residues. Additionally it can be used
as a thinner for epoxy coatings. For polyurethane coatings SM-
16 is added in a proportion up to 10% by weight.
Special solvent for
polyurethane coatings

FD-CLEAN Removes oil and grease residues from concrete floors by 18 kg 39
1403/1 emulsification.
4 kg 4 72

Oil/grease remover from
concrete floors

CL-MOLD Special cleaning fluid with antifungal activity. Cleans and 1 lit 12 324
1402/1 disinfects surfaces from mold, bacteria and algae. It may
NEW however be a precaution to prevent the occurrence of
microorganisms in high humidity situations. It is very effective
for cleaning surfaces such as walls, ceilings, natural stone,
brick, concrete, pools, etc. Furthermore, it can be used for
decontamination of fungi and maintain sanitary conditions in
places such as kitchens, restaurants, hotels, factories or
Antifungal cleaning fluid warehouses food, commercial ovens, etc.
Color: Blue.

60

Cleaning Agents

CL-UNIVERSAL General use liquid cleaner. It is used to remove stains of coffee, *20 lit 39
1402/1 wine, oils, grease and other similar stains from tiles, marbles, 5 lit 4 72
granites, formicas etc.
0,75 lit 12 324
Consumption:
1 lit/15-20m2.

General use cleaner

CL-GROUT Liquid cleaner for tile grouts. It is used to clean tile grouts from *20 lit 39
1402/1 salts, mould, stains of coffee, wine etc. 5 lit 4 72
0,75 lit 12 324
Consumption:
1 lit/15-20m2.

Special cleaner for tile
grouts

CL-MARBLE Liquid cleaner for marbles and granites.It is used to clean stains *20 lit 39
1402/1 of coffee, wine, oils, nicotine, ash and other stains from marbles 5 lit 4 72
and granites. It does not contain any acid and does not affect 0,75 lit 12 324
the sensitive surfaces. It is applied undiluted on the stained
surface and is left to act until the stain is disappeared. It usually
takes 24 hours until a stain is removed completely. For difficult
stains repeat the same process.

Special cleaner for Consumption:
marbles and granites 1 lit/15-20m2.

CL-INDUSTRY Liquid cleaner for industrial areas.It is used to clean stains of *1000 lit
1402/1 oils, grease and other intense stains from tiles, concrete, walls, *20 lit 39
epoxy floorings, metallic surfaces etc. Due to its effective
5 lit 4 72
formula it is ideal for cleaning stains in industrial areas.
0,75 lit 12 324
Consumption:
1 lit/15-20m2.

Special cleaner for
industrial floorings
CL-EPOXY FLOOR Liquid cleaner for epoxy floorings. It is used to clean stains of *1000 lit
1402/1 oils, grease and other intense stains from epoxy floorings. *20 lit 39
5 lit 4 72
Consumption:
0,75 lit 12 324
1 lit/15-20m2.

Special cleaner for
epoxy floorings

* Packages marked with an asterisk are available by order. 61

4.5 Elastic Joint Sealants

ISOMASTIC-A Elastoplastic sealant without solvents based on acrylic White
0601/6 polymers. Suitable for sealing work joints, thin expansion joints
280 ml 25 1.125
or plaster cracks in interior or exterior areas. Also suitable for
slightly wet surfaces. Easily paintable.
Color: White, grey.

Consumption:
Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length.
Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
Elastoplastic acrylic
sealant
DOMOSIL High performance, general-purpose silicone sealant for sealing Transparent
0623/6 joints 3 to 40 mm wide, on surfaces of non-porous materials
280 ml 25 1.125
It cannot be overpainted.
Color: Transparent, white. White
280 ml 25 1.125
Consumption:
General-purpose silicone
sealant
DOMOSIL-S High performance, mildew resistant silicone sealant for sealing Transparent
0622/6 joints 3 to 40 mm wide, on surfaces of non-porous materials such as 280 ml 25 1.125
glass, aluminum, porcelain (e.g. tiles), ceramic etc. Also suitable for
applications in high moisture sanitary areas such as bathrooms and
kitchens, as well as in hospital areas, laboratories etc. Prevents fungi White
development that creates stains and black spots. It is not 280 ml 25 1.125
recommended for aquariums since it contains fungicide. It cannot be
overpainted. Color: Transparent, white.
Consumption:
Mildew-resistant silicone Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.
sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.

DOMOSIL-MICRO High performance, anti-mould silicone sealant with built-in Transparent
®
0622/6 Microban antibacterial protection technology. Remains color 280 ml 12 900
stable even after 10 years. Appropriate for sealing joints of 3-
40mm wide in non-porous materials such as glass, aluminium,
porcelain and non-porous ceramics. It is applied in high humidity White
areas such as kitchens, bathrooms, etc. It is not recommended for 280 ml 12 900
use in aquariums and cannot be overpainted.
Anti-mould silicone Consumption:
sealant with built in Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
Microban® technology Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
DOMOSIL-POOL Silicone sealant resistant to permanent water immersion such Transparent
0622/6 as swimming pools, aquariums etc. Appropriate for sealing 280 ml 25 1.125
vertical or horizontal joints 3-40mm wide, for indoor and
outdoor applications. It has very good adhesion on surfaces
such as glass, porcelain, aluminium, ceramics etc. Suitable for
sealing joints on boats, glass-structures etc. It cannot be
overpainted. Color: Transparent.
Consumption:
Silicone sealant for Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
permanent water Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
immersion
62

Elastic Joint Sealants

FLEX PU-20 One-component, solvent-free polyurethane sealing mastic. Ideal Grey
0627/6 for sealing joints where high elasticity is required. Suitable for 600 ml 20 1.000
joints in concrete, brickwork, natural and synthetic stones, steel,
310 ml 12 1.560
600 ml 20 1.000
Consumption:
Polyurethane construction Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.
joint sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.

FLEX PU-40 One-component, solvent-free polyurethane sealing and adhesive Grey
0626/6 mastic. Exceptional adhesion to all building materials, e.g. 600 ml 20 1.000
concrete, brickwork, natural and synthetic stones, steel, 310 ml 12 1.560
White
Color: White, grey, brown. 600 ml 20 1.000
310 ml 12 1.560
Consumption: Brown
Polyurethane adhesive Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. 600 ml 20 1.000
and sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length. 310 ml 12 1.560

FLEX PU-30 S One-component, polyurethane sealing mastic with solvents. Grey
0626/6 Ideal for sealing joints where high elasticity is required. Suitable 600 ml 15 750
NEW for joints 5-50mm wide in concrete, brickwork, natural and 310 ml 25 1500
synthetic stones, steel, aluminium, wood, ceramic tiles etc. For
outdoor and indoor applications.
600 ml 15 750
Polyurethane sealant Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
Joint 5mm x 5mm: 1 cartridge/12 m of joint length.

FLEX PU-50 S One-component, polyurethane sealing and adhesive mastic with Grey
0626/6 solvents. Exceptional adhesion to all building materials, e.g. 600 ml 15 750
NEW concrete, brickwork, natural and synthetic stones, steel, 310 ml 25 1500
aluminium, wood, ceramic tiles etc. Suitable for joints 5-30mm
wide. For outdoor and indoor applications.
White
Color: Grey, white.
600 ml 15 750
Polyurethane adhesive Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
and sealant Joint 5mm x 5mm: 1 cartridge/12 m of joint length.

FLEX PU-2K Two-component joint sealant based on polyurethane resins. 5 kg 4(A) 27(A)
0633/6 Ideal for sealing horizontal and vertical concrete joints in floors (A+B) 6(B) 18(B)
NEW and structures like reservoirs, canals etc.
Available in two types:
FLEX PU-2KV: For vertical surfaces.
FLEX PU-2KH: For horizontal surfaces
Color: Grey

2-component Consumption: 1,45 kg/lit of joint volume
polyurethane joint sealant

63

Elastic Joint Sealants

FLEX MS-45 Elastomeric sealing and adhesive mastic with excellent bonding Grey
0629/6 to any kind of building material such as glass, aluminium, wood, 280 ml 25 1.125
PVC etc. It features high mechanical strength and great
endurance to ageing. It is also suitable for slightly wet
substrates. It is used for strong, elastic adhesions. Redbrown
Color: Grey, redbrown. 280 ml 25 1.125

Consumption:
Elastomeric adhesive Indicative consumption: 1 cartridge /10 linear meters.
and sealant

ELASTOTAN Elastomeric sealing and adhesive mastic with exceptional Grey
0607/6 adhesion to all building materials e.g. glass, aluminium, wood,
600 ml 15
PVC etc. It features high mechanical strength and resistance to
280 ml 25 1.125
ageing and weather conditions. Suitable for sealing joints 3 to
50 mm wide.
Color: White, grey. White
Consumption: 600 ml 15
Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. 280 ml 25 1.125
Elastomeric adhesive Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
mastic sealant
TIXOPHALTE Ready-to-use, cold-applied elastoplastic adhesive bituminous Black
0624/6 mastic sealant. Possesses superior permanent flexibility and 310 ml 24 1.440
excellent adhesion to all kinds of materials under various
conditions, even underwater.
Color: Black.

Consumption:
Approx.1,4 kg/lit of joint volume.
Elastoplastic & adhesive
bituminous mastic sealant

ISOMAT PU FOAM One-component, self-expanding polyurethane foam. It has an 750 ml 12 1.020
0632/6 excellent adhesion on wood, cement, stone, metal etc. It is used
for fixing door and window frames, filling holes, sealing voids on
roofs and insulating materials etc.

One-component
moisture cure
polyurethane foam
ISOMAT PU
FOAM Moisture curing, one-component, low expansion polyurethane 750 ml 12 1.020
foam. It offers excellent bond strength to most materials (wood,
PROFESSIONAL
0632/6 plaster, concrete, stone, metal, etc.), heat and noise insulation,
NEW resistance to moisture and ageing. It is used as an aid to
mechanically fixing door and window frames, filling holes, gaps,
cracks and cavities to insulating materials, filling gaps around
pipes going through walls etc.
One-component, low
expansion, polyurethane
foam
64

4.6 Bituminous Repairing Materials

ASPHALTOS Ready-to-use, cold asphalt mixture for patching small 25 kg 36
1010/6 potholes on asphalt or concrete pavements. It enables high
flexibility, without being cracked due to contraction-expansion
effects. It has superb adhesion to the substrate and features
high resistance to weather conditions and aging.
Color: Black.

Consumption:
Cold asphalt mix for Approx. 21 kg/m2 /cm of layer thickness.
instant road repair

ISOMAC Bituminous mastic with excellent adhesion and elasticity. It can 20 kg 36
1018/6 be cold-applied with a smooth trowel. Suitable for sealing joints 5 kg 120
on horizontal and vertical surfaces, for sealing-bridging hair
cracks and for flashing (sealing) difficult points during the fixing
of bituminous membranes (drainpipes, joints or junctions in
parapets etc). Also used for repairing in waterproofing layers
formed by bituminous membranes.
Bituminous mastic Color: Black.

Consumption: 1,2-1,3 kg/lit.

65


66


5.1 Cement-Based Plasters
5.2 Acrylic Plasters

5.3 Silicone Plasters
5.4 Plaster Primers

5.5 Plastering Reinforcement
Materials

67

5.1 Cement-Based Plasters

MARMOCRET-BOND Pre-mixed, cement-based plaster, used to create the bonding 25 kg 54
0340/1 spatterdash of the subsequent plaster layer. Suitable for creating
the bonding spatterdash (rough cast) on concrete, masonry,
thermo-insulation boards etc. in order to enhance the adhesion
of the “base layer” of plaster that follows. Needs only the addition
of water. Ideal for application with plastering machine. It classified
as type CS IV, W1 mortar according to EN 998-1.
Color: Grey.

Mortar for bonding Consumption:
spatterdash of plaster Approx. 5 kg/m . 2

MARMOCRET-BASE Pre-mixed, cement-based plaster, used to create the “base layer” 25 kg 54
0341/1 (brown coat) of plaster. It constitutes the ideal substrate of the
colored, water-repellent finish coat plasters application with
plastering machine. Needs only the addition of water.
It is classified as type CS II, W0 mortar according to EN 998-1.
Color: Grey.

Consumption:
Approx. 13,5 kg/m2/cm of plaster thickness.
Pre-mixed plaster
for the base layers
MARMOCRET 1 Pre-mixed, one layer plaster. Applied on maximum thickness of Grey
0306/1 3 cm per layer. Its usage requires the application of a bonding 30 kg 48
spatterdash (rough cast).Is mixed only with water. The plaster is
applied with a plastering machine or by hand, using a float or a
White
trowel. It is classified as type CS II, W1 mortar according to
EN 998-1. 30 kg 48
Color: Grey, white.

Consumption:
One layer plaster Approx. 15 kg/m2/cm.

MARMOCRET Fine Decorative, water-repellent finish coat plaster, for the 25 kg 54
0311/1 preparation of smooth surfaces. Needs only water. It is
classified as type CS II, W1 mortar according to EN 998-1.
Color: White.
Other colors by order (minimum quantity 6.000 kg).

Consumption:
Approx. 1,4 kg/m2/mm of plaster thickness.
Pre-mixed, colored,
Recommended thickness: 2-5 mm.
water-repellent plaster for
smooth final surface
MARMOCRET Decor Decorative, water-repellent finish coat plaster, for the 25 kg 54
0312/1 preparation of rough-textured surfaces. Needs only water.
It is classified as type CS II, W1 mortar according to AI 998-1.
Color: White.
Other colors by order (minimum quantity 6.000 kg).

Consumption:
Approx. 1,5 kg/m2/mm of plaster thickness.
Pre-mixed, colored, water- Recommended thickness: 2,5-3,5 mm.
repellent plaster, for rough-
textured final surface
68

Cement-Based Plasters

MARMOCRET Fine Decorative, polymer-modified, water-repellent finish-coat White
0336/1 plaster, white or colored for smooth final surface. It is applied
PLUS on substrates with special demands in elasticity and adhesion.
25 kg 54
MARMOCRET
Needs only water. In combination with the fibre-reinforced
adhesive Isomat AK-THERMO it is used as a system for Pallet
application on facade thermo-insulation boards. It is classified 25 kg 54
as type CS II, W2 mortar according to EN 998-1.
Color: White and 7 fixed colors (MARMOCRET pallet).
Other
Polymer-modified, colored, Other colors by order (minimum quantity 6.000 kg).
2 colors
water-repellent plaster, for Consumption: Approx. 1,4 kg/m /mm of plaster thickness.
Recommended thickness: 2-3 mm. 25 kg 54
smooth final surface
MARMOCRET Decor Decorative, polymer-modified, water-repellent finish-coat White
plaster, white or colored for rough-textured final surface. It is
0337/1 PLUS 25 kg 54
applied on substrates with special demands in elasticity and
adhesion. Needs only water. In combination with the MARMOCRET

fibre-reinforced adhesive Isomat AK-THERMO it is used as a Pallet
system for application on facade thermo-insulation boards. 25 kg 54
It is classified as type CS II, W2 mortar according to EN 998-1.
Color: White and 7 fixed colors (MARMOCRET pallet).
Polymer-modified, colored, Other colors by order (minimum quantity 6.000 kg). Other
water-repellent plaster, for 2 colors
Consumption: Approx. 1,4 kg/m /mm of plaster thickness.
rough-textured final
surface Recommended thickness: 2,5-3,5 mm. 25 kg 54

MARMOCRET Polymer-modified, water-repellent, cement-based finish coat 25 kg 54
0341/1 plaster. It consists of aggregate with a special particle size
GRAFFIATO granulation, to form an extra coarse-textured decorative surface.
It is applied on substrates with special demands in elasticity and
adhesion. In combination with the fibre-reinforced adhesive
Isomat AK-THERMO it is used as a system for application on
thermo-insulation boards. It is classified as type CS III, W2
mortar according to EN 998-1. Color: White.
Polymer-modified, water- Consumption:
2
repellent plaster, for rough- Approx. 1,5 kg/m /mm of plaster thickness.
textured final surface. Recommended thickness: 3-4 mm.
MARMOCRET-S Mortar-binder for preparation of white, water-repellent plasters. 15 kg 60
0304/1 To be mixed with marble sand and water.
Color: White.

Consumption:
1 bag/10 m2/5 mm.

Mortar-binder for the
preparation of white
water-repellent plasters
MARMOCRET-SP Restoration plaster, particularly durable to salts and moisture. 25 kg 54
0304/1 Suitable for the restoration of renders in buildings located near
to the sea or in areas exposed to rising damp. Appropriate also
for areas with high humidity such as bathrooms, basements etc.
For indoor and outdoor applications.
Color: white.

Consumption:
Restoration plaster for Approximately 10 kg/m2/cm.
renovation
69

Cement-Based Plasters

ISOMAT ST-1 Special impregnation for the restoration of salt damaged 20 kg 39
0224/1 masonry. It transforms water soluble salts such as chlorides 5 kg 4 72
and sulphates into insoluble compounds. It is used for the 1 kg 12 324
restoration of salt damaged masonry in combination with the
renovation plaster MARMOCRET-SP.

Consumption:
0,4-0,5 kg/m2.
Impregnation of salt
damaged masonry

UNICRET Mortar suitable for plastering and masonry works. Grey
0309/1 It is classified as type GP CS II W0 mortar according to 25 kg 54
EN 998-1.
Color: Grey, white.
White

Mortar for plastering and
masonry
UNICRET-FAST Fast-setting white mortar, ideal for quick plaster repairs in old 25 kg 54
0325/1 and new constructions. Replaces the use of gypsum in 5 kg 4 160
respective applications.
It is classified as type GP CS I W0 mortar according to
EN 998-1.
Color: White.

Consumption:
Fast-setting, white
repairing mortar
ISOMAT MT 80 Pre-mixed, cement-based mortar for masonry. It is used only 25 kg 54
0576/1 with the addition of water. It simplifies and accelerates the 15 kg 90
applications. Used on various types of building materials such
as bricks, blocks, aerated concrete blocks, stone, etc.

Consumption:
Indicative consumption for bricks of dimensions
6x9x12 cm: 20 kg/m2 masonry.
mortar for masonry
ISOMAT MT-80 S Pre-mixed, cement-based mortar for masonry. Due to its special 25 kg 54
0576/1 formula it prevents the formation of salts on masonries which
are exposed to the weather conditions. It is used on various
types of building materials such as bricks, blocks, stone, etc.
EN 998-2.
Color: Grey.
Consumption: Indicative consumption for bricks of dimensions
mortar for exposed
6x9x12 cm: 20 kg/m2 of masonry.
masonry
70

5.2 Acrylic Plasters

MARMOCRYL Fine Acrylic, ready-to-use, white or colored, water-repellent coat White
0345/6 1 mm plaster. Suitable for creating a smooth surface. Aliminates the 25 kg 24
0346/6 1,5 mm need of facade painting. Due to its high elasticity and its
2,0 mm excellent bonding to the surface MARMOCRYL Fine is also an NCS
0347/6
ideal final layer for external thermo-insulated facades.
Color: White and 305 selected (NCS pallet). Pallet
Other colors by order (minimum quantity 150 kg). 25 kg 24
Recommended thickness:
MARMOCRYL Fine 1 mm: 1 mm. White
MARMOCRYL Fine 1,5 mm: 1,5 mm. *5 kg 75
MARMOCRYL Fine 2 mm: 2 mm.
Acrylic, ready-to-use, NCS
colored, water-repellent Consumption: Approx. 1,8 kg/m2/mm Pallet
plaster for smooth final *5 kg 75
surface The colors of MARMOCRYL Fine may present small differences
from those of FLEXCOAT and ISOMAT-ACRYL because of the
plaster's texture.

*The package of 5 kg is available only in MARMOCRYL Fine 1,5mm.
MARMOCRYL Decor Acrylic, ready-to-use, white or colored, water-repellent finish White
0349/6 2 mm coat plaster. Suitable for creating a rough-textured decorative 25 kg 24
surface. Eliminates the need for painting. Due to its high
0350/6 3 mm
elasticity and its excellent bonding to the surface MARMOCRYL
NCS
Decor is also an ideal final layer for external thermo-insulated
facades. Pallet
Color: White and 305 selected (NCS pallet). 25 kg 24
Other colors by order (minimum quantity 150 kg).

MARMOCRYL Decor 2 mm: 2 mm.
Acrylic, ready-to-use, MARMOCRYL Decor 3 mm: 3 mm.
colored, water-repellent
plaster for rough-textured Consumption: 2
final surface Approx. 1,6 kg/m /mm
The colors of MARMOCRYL Decor may present small differences
from those of FLEXCOAT and ISOMAT-ACRYL because of the
plaster's texture.


MARMOCRYL GRANIT Acrylic, pasty coating with a granite-like finish. G 300 25 kg 24
0372/6 It is used as a finish coat to create a colored , G 530
water-repellent, coarse-textured finish surface.
G 440, G 500
It can be applied on all kinds of building
materials such as plaster, concrete, cement G 550
boards, gypsum boards etc. Ideal as a final G 710,G 760,G 820,G 870
coating for the external thermal insulation G 930
composite systems in facades. G 950
Color: 24 selected (MARMOCRYL GRANIT G 660
pallet).
G 160, G 980
Acrylic, pasty coating Consumption:
G 490
with a granite-like finish Approximately 1,8 kg/m2/mm. Recommended
application thickness: Approx. 2mm. G 510, G 600
G 130,G 150,G 220
71

Premixed Plasters
Acrylic Plasters

MARMOCRYL GRANIT G 380 25 kg 24
0372/6 G 330
G 270
G 110

5.3 Silicone Plasters

MARMOCRYL Ready-to-use, white or colored, silicone plaster. Marmocryl White
silicone is characterized by its extreme hydrophobia and has 25 kg 24
SILICONE Fine excellent vapor permeability. It is suitable for creating a smooth
0360/6 1 mm surface. Eliminates the need of facade painting. Due to its high
0361/6 1,5 mm NCS
elasticity and its excellent bonding to the surface is also an ideal
0362/6 2,0 mm final layer for external thermo-insulated facades. Pallet

MARMOCRYL SILICONE Fine 1 mm: 1 mm.
Ready-to-use, water MARMOCRYL SILICONE Fine 1,5 mm: 1,5 mm.
repellent, colored MARMOCRYL SILICONE Fine 2 mm: 2 mm.
silicone plaster.
Smooth finish Consumption: Approx. 1,8 kg/m2/mm

The colors of MARMOCRYL SILICONE Fine may present small
differences from those of FLEXCOAT and ISOMAT-ACRYL
because of the plaster's texture.
MARMOCRYL Ready-to-use, white or colored, silicone plaster. Marmocryl White
silicone is characterized by its extreme hydrophobia and has 25 kg 24
SILICONE Decor excellent vapor permeability. It is suitable for creating a rough
0364/6 2 mm textured surface. Eliminates the need of facade painting. Due to
0365/6 3 mm its high elasticity and its excellent bonding to the surface is also
NCS
Pallet
an ideal final layer for external thermo-insulated facades.

MARMOCRYL SILICONE Decor 2 mm: 2 mm.
Ready-to-use, water MARMOCRYL SILICONE Decor 3 mm: 3 mm.
repellent, colored
silicone plaster. Consumption: Approx. 1,6 kg/m2/mm
Rough-textured finish
The colors of MARMOCRYL SILICONE Decor may present small
differences from those of FLEXCOAT and ISOMAT-ACRYL
because of the plaster's texture.

72

5.4 Plaster Primers

PL-PRIMER Concentrated plaster primer-dehydration barrier. It is applied 20 kg 39
0119/1 upon dilution with water on surfaces that will be subsequently 5 kg 4 72
plastered. It prevents fast absorption of plaster's water by the
substrate. Suitable for aerated concrete surfaces.
Color: Red.

Consumption:
40-100 g/m2.
Plaster primer -
Dehydration barrier

PL-BOND Adhesion primer consisting of synthetic resins and quartz sand. 20 kg 24
0333/1 Used for priming smooth or non-absorptive surfaces, instead of 5 kg 110
spatterdash (rough cast), in order to increase the adhesion of
the subsequent plaster. Ideal substrate for gypsum plasters.
Suitable for indoor and outdoor use.

Consumption:
Plaster adhesion 300-350 g/m2, depending on layer thickness.
primer

5 kg 4 72
1 kg 12 324
MARMOCRYL.Color: White.

UNI-PRIMER Ready-to-use acrylic water-based primer. Stabilizes weak, 20 kg 39
0209/1 loose or crumbling plasters. 5 kg 4 72
Color: White.
1 kg 12 324
Consumption:
100-200 g/m2.

Acrylic water-based
primer

SILICONE-PRIMER Silicone polymer aqueous emulsion which stabilizes porous 20 kg 39
0359/6 substrates and ensures the proper adhesion of silicone plasters 10 kg 44
MARMOCRYL SILICONE. 5 kg 4 72
Color: White.

The package of 10kg is available in round, plastic container
that is useful for preparing colored primer. A colored primer is
Adhesion primer for necessary when the substrates will be covered with silicone
silicone plasters plasters of base D & TR.

73

Premixed Plasters
5.5 Plastering Reinforcement Materials
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/PAL.

FIBERGLASS MESH High-strength fibreglass mesh for reinforcing plasters or Roll
cement mortars that are subject to cracking.
FOR PLASTER Blue color, 90 g/m2. 0,25m x 50m 16
1207/1 Mesh: 10,0 mm x 10,0 mm. (12,5 m2)

Blue color, 90 g/m2. 1m x 50m 30
Mesh: 10,0 mm x 10,0 mm. (50 m2)

Blue color, 120 g/m2. 1m x 50m 30
Mesh: 10,0 mm x 10,0 mm. (50 m2)
White color, 90 g/m2. 1m x 50m 30
Mesh: 5,0 mm x 5,0 mm. (50 m2)

2
Mesh: 5,0 mm x 5,0 mm. Ideal for facade thermo-insulation works. (50 m )
2
Mesh: 4,0 mm x 4,0 mm. Ideal for facade thermo-insulation works. (50 m )

FIBERGLASS TAPE Self-sticking fibreglass tape for reinforcing gypsum boards, Roll
cement sheets etc. Also used for bridging cracks in other 90 m 24
1207/1 repairing works.
Tape’s width: 5 cm.
Roll
20 m 100
Self-sticking fibreglass
tape

74


6.1 Cement-Based Floorings
6.2 Impregnations for
Cement-Based Floorings
6.3 Epoxy-Cement Based Floorings
6.4 Epoxy-Based
& Polyurethane-Based Floorings

75

6.1 Cement-Based Floorings

EXTRA-TOP Surface hardener for cement-based floors with quartz Grey
0327/1 aggregates and special admixtures. Suitable for industrial floors, 25 kg 54
basements, auto repair shops, machine shops, parking lots, Ochre
warehouses, loading-unloading areas etc.
25 kg 54
Color: Grey, ochre, redbrown, light blue.
Redbrown
3-5 kg/m2. Light Blue
Surface hardener for 25 kg 54
cement-based floors
EXTRA-TOP CR Hardening agent for industrial floors with corundum, quartz 25 kg 54
0327/1 aggregates and special admixtures. Suitable for floors with
high demands in mechanical strength such as industrial floor,
basements, auto repair shops, machine shops, parking lots,
warehouses, loading-unloading areas, isles etc.
Color: Grey.

Consumption:
Hardening agent for 3-5 kg/m2.
industrial floors with
corundum
FLOWCRET 1-10 Self-leveling, polymer-modified cementitious screed, for 25 kg 54
0307/1 smoothing and leveling concrete or mortar floors, before
laying finishing materials like carpet, parquet layers, tiles etc.
Applied at a thickness of 1-10 mm per layer.
Color: Grey.

Consumption:
Self-leveling, polymer-
modified cementitious
screed
FLOWCRET 1-10 Fast-setting, self leveling, polymer-modified cementitious Grey
0307/1 EXPRESS screed, used for smoothing and leveling concrete or
25 kg 54
mortar floors, before laying finishing materials like ceramic
tiles, carpets, parquet, vinyl tiles etc. It can be used in a
thickness of 1-10mm. Ideal for quick repairs, as it can be White
walkable after 3 hours. Also, it can be covered after 24 hours. 25 kg 54
Color: Grey, White.

Fast-setting, self-leveling, Consumption:
polymer-modified cementi- Approx. 1,65 kg /m2 /mm of layer thickness.
tious screed
FLOWCRET 3-30 Fast-setting, self-leveling, polymer-modified compound, used 25 kg 54
0307/1
EXPRESS for the smoothing and leveling of surfaces. It can be applied at a
thickness of 3-30mm.
Ideal before installing floor coverings such as tiles, carpet,
plastic or wooden floor, marbles, natural stones etc. Suitable
also for floors with underfloor heating.
Color: Grey

Fast-setting, self-leveling Consumption: 2
Approx. 1,65 kg/m /mm of layer thickness.
compound

76

Cement-Based Floorings

DUROCRET-DECO Polymer-modified, fiber-reinforced, cement mortar. It provides 25 kg 54
0310/1 excellent adhesion to the substrate, waterproofing and abrasion White
NEW resistance. For indoor and outdoor use in a variety of
Grey
applications, on floors and walls, wherever aesthetic
Light Grey
intervention is needed (e.g. Cycladic architecture) in homes,
shops, hotels etc. Suitable for special structures such as built-in Light Ochre
beds, built sanitary ware (sinks, bathtubs, showers etc.) Mocha
Colors: white, grey, light grey, mocha, crocus, light ochre. Crocus
Cement screed for
surface finishing on Consumption: Approx. 1,5 kg/m2/mm.
floors and walls
SCREED-100 Cementitious screed for filling and leveling floors to be covered 25 kg 54
0328/6 with tiles, marble, parquet etc., as well as for forming slopes on
terraces. It replaces non-reinforced concrete or gas-concrete.
Applied at a thickness of up to 10 cm per layer.
Color: Grey.

Consumption:
Approx. 14 kg/m2/cm.
Floor leveling cementious
screed

SCREED-SX Rapid setting, reinforced mortar that replaces the cement 20 kg 54
0328/6 (binder) of floor screeds. It consists of special cements and
special additives. After mixing with sand and water it is
prepared a rapid setting cement mortar with high strength.
Suitable for filling and leveling of floors, before laying tiles,
marbles, natural stones, parquet, vinyl tiles, floors with
underfloor heating system etc. Also for preparing cement mortar
grade for terraces and outdoor areas.
Rapid setting mortar-
Color: Grey.
binder for the preparation
Consumption: Approx. 2,0-3,5 kg/m2/cm.
of floor screeds

6.2 Impregnations for Cement-Based Floorings

ISOMAT BI-100 Water-based polymer emulsion with high penetration ability. 20 kg 39
0224/1 When applied on concrete floors or cement screeds, it hardens 5 kg 4 72
and dustproofs the surface. Suitable for indoor and outdoor use.
1 kg 12 324

Consumption:
100-200 g/m2, depending on the substrate's absorption.
Concrete hardening and
dustproofing
impregnation
77

Industrial Floorings
Impregnations for Cement-Based Floorings

(A+B) (A+B)
Consumption:
Two-component, 150-250 g/m2/layer.
colorless epoxy
impregnation

6.3 Epoxy-Cement Based Floorings

DUROFLOOR-CMT Three-component, epoxy-cement, self-leveling flooring, solvent- 25 kg
0422/2 free. It is used for repairing and levelling of cement-based floors (A+B+C)
NEW that are going to be covered with DUROFLOOR epoxy systems,
polyurethane coatings, plastic flooring, wooden flooring etc. It is
also applied in cases where the floor is relatively fresh or is
stressed by rising damp in order to create the proper substrate
for the application of epoxy layer, to avoid problems of
detachment. Color (A+B+C): Grey.
Three-component,
self-leveling Consumption: Approx. 2,1 kg/m2/mm.
epoxy-cement flooring

6.4 Epoxy-Based & Polyurethane-Based Floorings

DUROFLOOR Two-component, solvent-free, self-leveling epoxy flooring. After 9 kg 39
0401/2 mixing the two components, Q35 quartz sand is added inside in (A+B) (A+B)
proportions DUROFLOOR : quartz sand = 1:2 by weight.
Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL 7040
Other
(grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL 1013
(white-beige), RAL 6021 (light green), RAL 5024 (pastel blue). colors
Other RAL colors by order (minimum quantity 144 kg). 9 kg 39
Two-component, self- DUROFLOOR: 0,6 kg/m2/mm.
leveling epoxy flooring Quartz sand: 1,2 kg/m2/mm (mix. ratio:DUROFLOOR:sand=1:2).

DUROFLOOR 11 Two-component, solvent-free epoxy flooring. With the addition of 250 kg
0400/2 quartz sand M32 in proportions 1:1 by weight, it can be used (A+B)
as a self-leveling epoxy flooring. Also, without adding quartz 16 kg 39
sand, it can be applied as a brushable epoxy coating. Color:
(A+B) (A+B)
RAL 7032 (sand grey), RAL 7040 (grey). Other RAL colors by
order (minimum quantity 160 kg).
Consumption: Other
As a self-leveling epoxy flooring: 0,85 kg/m2/mm. colors
Two-component epoxy
Consumption of quartz sand: 0,85 kg/m2/mm. 16 kg 39
flooring
As a brushable epoxy coating: 250-300 g/m2/layer. (A+B) (A+B)
78

Epoxy-Based & Polyurethane Floorings

DUROFLOOR-R Two-component, solvent-free brushable epoxy coating, suitable 275 kg
0404/2 for concrete or cement mortar surfaces. (A+B)
Color: RAL 7032 (sand grey), RAL 7035 (light grey), RAL
10 kg 39
7040 (grey), RAL 3009 (redbrown), RAL 1015 (beige), RAL
1013 (white-beige), RAL 6021 (light green), RAL 5024 (pastel (A+B) (A+B)
blue). Other RAL colors by order (minimum quantity 150 kg).
Other
Consumption: colors
Two-component, 250-300 g/m2/layer. 10 kg 39
brushable epoxy coating
(A+B) (A+B)

DUROFLOOR-PU Two-component, colored, polyurethane coating without 10 kg 39
0431/2 solvents, with excellent resistance to UV radiation. (A+B) (A+B)
DUROFLOOR-PU is used as a coating on concrete floors,
cement screeds, etc. Color: RAL 7040 (grey). Other RAL colors
by order (minimum quantity 150 kg).

Consumption:
250-300 g/m2/layer.
Two-component,
brushable polyurethane
coating
(A+B) (A+B)
Consumption:
Two-component, 150-250 g/m2/layer.
colorless epoxy
impregnation

DUROFLOOR-C Two-component, solvent-free, self-leveling, conductible epoxy 10 kg 39
0409/2 flooring, used to eliminate static electricity problems. (A+B) (A+B)
Color: RAL 7040 (grey), RAL 1015 (beige). Other RAL colors
by order (minimum quantity 150 kg).
Other
Consumption: colors
Approx. 1,5 kg/m2/mm. 10 kg 39
(A+B) (A+B)
Two-component, self-
leveling, conductible
epoxy flooring

DUROFLOOR-CV Two-component, conductible epoxy varnish. To be used before 8 kg 39
0410/2 DUROFLOOR-C. (A+B) (A+B)
Color: Black.

Consumption:
Approx. 200 g/m2.

Two-component,
conductible
epoxy varnish
79

Industrial Floorings

DUROFLOOR-PSF Transparent, two-component, solvent-free epoxy primer. It is 280 kg
0419/2 used as a primer on surfaces that will be subsequently coated (A+B)
with epoxy flooring systems, as a binder for preparing epoxy 10 kg 39
mortars with the addition of quartz sand and also for sealing (A+B) (A+B)
cementitious floors at industrial areas and warehouses.
5 kg 6(A) 48
Consumption: (A+B) 12(B) (A+B)
Two-component,
solvent-free epoxy 200-300 g/m2.
primer
DUROPRIMER-PSF Two-component, solvent-free epoxy primer. It is used as a 10 kg 39
0402/2 primer on surfaces which will be subsequently coated with (A+B) (A+B)
epoxy flooring systems and also as a binder for preparing
epoxy mortars with addition of quartz sand.

Consumption:
Two-component, 200-300 g/m2.
solvent-free epoxy
primer
DUROPRIMER Two-component, colorless, solvent-based epoxy primer. It is 200 kg
0402/2 used on substrates to be coated with epoxy layers of the (A+B)
DUROFLOOR system.
9 kg 48
200-300 g/m2.
3 kg 105
(A+B) (A+B)
Two-component epoxy
primer

EPOXYPRIMER-W Two-component, water-based epoxy primer. It is used as a 10 kg 39
0402/2 primer for cement-based substrates, e.g. concrete or (A+B) (A+B)
cement-screeds, which will be covered with epoxy layers of
DUROFLOOR system. It can also be used as a primer of
ISOFLEX-PU when applied over non-absorptive substrates or
over old waterproofing layers.

Two-component, water- Consumption:
based epoxy primer 200-300 g/m2.

DUROPRIMER-W Three-component, water-based epoxy primer. It is used for 21 kg 11
0423/2 priming wet or fresh (age < 28 days) concrete floors that will be (A+B+C) (A+B+C)
subsequently covered with epoxy layers of the DUROFLOOR
system.
Color: Dark yellow.

Consumption:
250-300 g/m2/layer.
Three-component,
water-based epoxy primer

80


DUROPRIMER-SG Two-component, solvent-free epoxy system. It is used as a 10 kg 39
0402/2 primer for oil contaminated, but cleaned concrete surfaces (A+B) (A+B)
and for the priming of still damp concrete or screed surfaces
which will be covered with epoxy layers of DUROFLOOR
system.
Color: Light beige.

Consumption:
Epoxy primer for 600-1000 g/m2.
oil contaminated concrete
floors and vapour barrier

81

APPENDIX
! Tools & Accessories
! Product Index

83

Tools & Accessories
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. WIDTH PS/E.-PAL.

CROSS TILE For setting uniform joints, while fixing ceramic tiles. bag/box
Packaging: 500 pieces/bag.
SPACERS 80 1 mm
1374/6
80 2 mm
40 3 mm
30 4 mm
18 5 mm
14 7 mm
5 10 mm
T-SHAPED TILE For setting uniform joints, while fixing ceramic tiles. bag/box
SPACERS Packaging: 500 pieces/bag. 60 3 mm
1399/6 30 5 mm
24 7 mm

CROSS For setting uniform joints, while fixing glass-blocks. bag/box
Packaging: 50 pieces/bag. 6
GLASS-BLOCK
SPACERS
1374/6

WEDGES For fixing ceramic tiles. bag/box
1364/6 Packaging: 500 pieces/bag. 100

TROWEL For the application of DUROFLOOR self-leveling epoxy floor.
NOTCHED
1311/6

FLOOR FINISH Adjustable floor finish scraper for the application of DUROFLOOR
self-leveling epoxy floor.
SCRAPER
1329/6

THIXOTROPIC Additive of epoxy layers which increases thixotropy and 1,5 kg
decreases fluidity on vertical or sloped surfaces.
AGENT
1398/6

SPIKED ROLLER Used on the fresh layer of DUROFLOOR self-leveling epoxy floor
1318/6 immediate after application with the notched trowel, permitting
the trapped air to escape and homogenizing the mixture.
· 12 mm spikes.

SPIKED SHOES Special shoes with spikes used during the application of
1319/6 DUROFLOOR self-leveling epoxy floor.

84

Tools & Accessories
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. WIDTH PS/E.-PAL.

Q35 QUARTZ SAND Quartz sand of special granulometry for manufacturing flooring Bag
1370/6 layers with DUROFLOOR. 18 kg 54

M32 QUARTZ SAND Quartz sand of special granulometry for manufacturing flooring Bag
4061/6 layers with DUROFLOOR 11. 25 kg 53

COPPER TAPE Used during application of DUROFLOOR-C conductible epoxy Roll
floor. 20 m
SELF-ADHESIVE
1324/6

SPECIAL GUN For mastic cartridges 310 ml.
FOR CARTRIDGES
1301/6 For mastic sausages 600 ml.

EPOXY RESIN Device for the application of injectable epoxy resins.
INJECTION POT
1308/6

METALLIC TROWEL For final surface treatment of plasters.
1360/6

SPONGE TROWEL For MARMOCRET Fine final surface treatment.
1361/6

HARD SPONGE Hard sponge for smoothing and emulsifying of MULTIFILL- 10
1331/6 EPOXY tile gout.
Dimensions: 165 x 110 x 50 mm.

HARD SPONGE Hard sponge with handle for smoothing and emulsifying of 4
WITH HANDLE MULTIFILL-EPOXY tile grout.
1332/6 Dimensions: 15 x 30 cm.

Spare hard sponge. 10

SOFT SPONGE Soft sponge with handle for the final cleaning of MULTIFILL- 4
WITH HANDLE EPOXY tile grout.
1333/6 Dimensions: 15 x 30 cm.

Spare soft sponge. 10

85

Product Index
PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE

ADIFLEX-B 25 DELTA-NP-DRAIN 18 EPOXYCOAT-AC 57
ADINOL-DM 25 DELTA SCREWS 19 EPOXYCOAT-S 57
ADINOL-RAPID 24 DELTA TERMINATION BARS 18 EPOXYCOAT-VSF 57
ADINOL-RAPID 2H 24 DELTA-VENT N 16 EPOXYCOAT-W 57
ADIPLAST 26 DELTA-VENT S 16 EPOXYPRIMER-W 80
ADIUM 110 22 DELTA WASHERS 19 EPOXY RESIN INJECTION POT 85
ADIUM 130 23 DOMOLIT 25, 50 EXTRA-TOP 76
ADIUM 132 23 DOMOLIT-TR 25 EXTRA-TOP CR 76
ADIUM 145 23 DOMOSIL 13, 62 FAST-COVER 52
ADIUM 150 23 DOMOSIL-MICRO 14, 62 FD-CLEAN 60
AQUAFIX 5 DOMOSIL-POOL 14, 62 FERROSEAL 44
AQUAMAT 4 DOMOSIL-S 14, 62 FERROSEAL-MCI 44
AQUAMAT-ADMIX 5 DRAGOFOL 16 FIBERGLASS MESH FOR PLASTER 74
AQUAMAT-ELASTIC 4, 7 DS-99 26 FIBERGLASS MESH FOR WATERPR. 11
AQUAMAT-F 11 DUREBOND 47 FIBERGLASS TAPE 74
AQUAMAT-FLEX 4, 7 DUROCRET 44 FLEXCOAT 9, 54
AQUAMAT-MONOFLEX 4, 7 DUROCRET-DECO 44, 77 FLEX-COVER 51
AQUAMAT-PENETRATE 4 DUROCRET-FAST 44 FLEX MS-45 15, 64
ASOLIT-POWDER 25, 50 DUROCRET-PENETRATE 45 FLEX-PRIMER 9,55,73
ASPHALTOS 65 DUROFLOOR 78 FLEX PU-20 14, 63
BEVETOL-RD 22 DUROFLOOR 11 78 FLEX PU-2K 15, 63
BEVETOL-SPL 22 DUROFLOOR-BI 57,78,79 FLEX PU-30S 15, 63
BEVETOL-VZ 23 DUROFLOOR-C 79 FLEX PU-40 14, 63
CEMENT HIGH-STRENGTH 52 DUROFLOOR-CMT 78 FLEX PU-50S 15, 63
CL-CLEAN 60 DUROFLOOR-CV 79 FLOOR FINISH SCRAPER 84
CL-EPOXY FLOOR 61 DUROFLOOR-PSF 80 FLOWCRET 1-10 76
CL-GROUT 61 DUROFLOOR-PU 79 FLOWCRET 1-10 EXPRESS 76
CL-INDUSTRY 61 DUROFLOOR-R 79 FLOWCRET 3-30 EXPRESS 76
CL-MARBLE 61 DUROPRIMER 80 GB-COVER 52
CL-MOLD 54, 60 DUROPRIMER-PSF 80 HARD SPONGE 85
CL-UNIVERSAL 61 DUROPRIMER-SG 5, 81 HARD SPONGE WITH HANDLE 85
COPPER TAPE SELF-ADHESIVE 85 DUROPRIMER-W 80 ISOCURE 27
CROSS TILE SPACERS 84 ELASTOTAN 13, 64 ISOCURE-A 27
CROSS GLASS-BLOCK SPACERS 84 EPOMAX-ANCHOR 47 ISODIEN 4 PF ALU 8
DELTA-FLORAXX 18 EPOMAX-EK 46 ISOFLEX 6
DELTA-FLORAXX TOP 18 EPOMAX-L10 47 ISOFLEX-PU 6
DELTA-FOL LP 17 EPOMAX-L20 47 ISOFLEX-T25 6
DELTA-FOL PVE 16 EPOMAX-LD 48 ISOGUM 3V 8
DELTA-FOL PVG 16 EPOMAX-PL 48 ISOGUM P 7
DELTA-MS 18 EPOMAX-STUCCO 46 ISOLAC AQUA-GLOSS 56
DELTA-NB 17 EPOXYCOAT 56 ISOLAC AQUA-PRIMER 56
86

Product Index

ISOLAC AQUA-SATIN 56 ISOMAT GLITTER 38 MONTAGE-S 41
ISOLAC-BT 8 ISOMAT MT-200 40 MONTAGE-W 41
ISOMAC 8, 65 ISOMAT MT-80 49, 70 MULTIFILL 34
ISOMASTIC-A 62 ISOMAT MT-80 S 49, 70 MULTIFILL-ELASTIC 38
ISOMAT-ACRYL 54 ISOMAT PROFESSIONAL ACRYL 55 MULTIFILL-EPOXY FLOW 38
ISOMAT-CLASSIC 53 ISOMAT PROFESSIONAL CLASSIC 53 MULTIFILL-EPOXY GLITTER 38
ISOMAT AG 77 59 ISOMAT PU-FOAM 64 MULTIFILL-EPOXY THIXO 38
ISOMAT AK 9 30 ISOMAT PU FOAM PROFESSIONAL 64 MULTIFILL MARBLE 0-3 37
ISOMAT AK 10 30 ISOMAT SILICONE 54 MULTIFILL RAPID 1-8 35
ISOMAT AK 11 30 ISOMAT SL 17 11 MULTIFILL SMALTO 1-8 36
ISOMAT AK 12 30 ISOMAT ST-1 70 MULTIFILL STONE 37
ISOMAT AK 20 30 ISOMAT HYDROCHROMA 53 MULTIFLEX 33
ISOMAT AK 22 31 ISOPAST 8 NANO-SEAL 9
ISOMAT AK 25 31 ISOPAST-RUBBER 9 NANOPRO-C 10, 58
ISOMAT AK 50 33 ISO-PRIMER 6 NANOPRO-L 10, 59
ISOMAT AK-BLOCK 40 JOINT-FILLER 52 NANOPRO-M 10, 59
ISOMAT AK-ECOLIGHT 31 LATEX 26 NOZZLES 47
ISOMAT AK-ELASTIC 32 M32 QUARTZ SAND 85 PLANFIX 51
ISOMAT AK-EPOXY FAST 41 MARMOCRET 1 68 PLANFIX-FINE 51
ISOMAT AK-EPOXY NORMAL 41 MARMOCRET-BASE 68 PLANFIX-FINE PROFESSIONAL 51
ISOMAT AK-FIRE 40 MARMOCRET-BOND 68 PLASTIPROOF 5, 22
ISOMAT AK-FLUX 33 MARMOCRET Decor 68 PL-BOND 73
ISOMAT AK-GLASS 40 MARMOCRET Decor PLUS 69 PL-PRIMER 73
ISOMAT AK-GRAND 32 MARMOCRET Fine 68 PLASTIC SLEEVE 48
ISOMAT AK-LIGHT 31 MARMOCRET Fine PLUS 69 POLYPROPYLENE FIBERS 27
ISOMAT AK-MARBLE 32 MARMOCRET GRAFFIATO 69 PRIMER ACRYL 55
ISOMAT AK-MEGARAPID 31 MARMOCRET-S 69 PRIMER ACRYL-S 55
ISOMAT AK-PARQUET 41 MARMOCRET-SP 69 PRIMER CLASSIC 53
ISOMAT AK-PRIMER 33 MARMOCRYL Decor 71 PRIMER PU 6
ISOMAT AK-RAPID 32 MARMOCRYL Fine 71 PS-20 10, 58
ISOMAT AK-STONE 32 MARMOCRYL GRANIT 71 PS-21 10, 58
ISOMAT AK-T33 39 MARMOCRYL SILICONE Decor 72 Q35 QUARTZ SAND 85
ISOMAT AK-T35 39 MARMOCRYL SILICONE Fine 72 RAPICRET 45
ISOMAT AK-T55 39 MEGACRET-10 45 REOTOL-SPL 22
ISOMAT AK-T65 39 MEGACRET-40 45 RETADOL 24
ISOMAT AK-THERMO 39 MEGACRET-40 FAST 45 ROOF-TOP 17
ISOMAT AK-THERMO ACRYL 40 MEGAGROUT-100 46 SCREED-100 77
ISOMAT BATH & KITCHEN 53 MEGAGROUT-101 46 SCREED-SX 77
ISOMAT BI-100 77 MEGAPLATE 49 SILICONE-PRIMER 73
ISOMAT BUTYL TAPE 12 MEGAWRAP-200 48 SM-12 60
ISOMAT BUTYL TAPE ALU 17 METALLIC TROWEL 85 SM-14 58
87

Product Index

SM-16 7, 60 STUCCOCRET 50 UNCOUPLING MEMBRANE 42
SM-18 55 STUCCOCRET-PLUS 51 UNICRET 49, 70
SOFT SPONGE WITH HANDLE 85 SUPERBOND-PU 42 UNICRET-FAST 50, 70
SPECIAL GUN FOR CARTRIDGES 85 THIXOTROPIC AGENT 84 UNI-PRIMER 33, 73
SPIKED ROLLER 84 TIXOPHALTE 13, 64 VS-1 59
SPIKED SHOES 84 TREVIRA 11 WATERPROOFING & UNCOUPLING MEMBRANE 13, 42
SPLIT-2000 26 TROWEL NOTCHED 84 WATERPROOFING MATERIALS 12
SPONGE TROWEL 85 T-SHAPED TILE SPACERS 84 WATERSTOP 1520 15
WEDGES 84

Note:
In case of ordering products with special colors that are not listed in the price list, explicit agreement about price and
delivery time is required.

ISOMAT. Building quality

ISOMAT is the potent, liable company that sets new standards in
building. The products of ISOMAT are innovative and offer smart
solutions in new constructions, in renovation and in restoration
of damages.

They are developed in the Research and Development
Department with devotion to quality and emphasis in detail.
When reaching the market they should be perfect in every
aspect. They should provide radical solutions, be user-friendly,
economic and reliable through time. Our satisfied customers
from the world of construction, industry and commerce are our
best reference.

Nevertheless, ISOMAT moves further on. With a highly qualified
staff of engineers, we provide reliable technical support to
everyone concerned. The consultant of ISOMAT is always close
to you in order to advice you on any building issue. Because ISOMAT
is interested in your success and in the quality of your construction.

ISOMAT S.A.
BUILDING CHEMICALS AND MORTARS

MAIN OFFICES - FACTORY
17th km Thessaloniki - Ag. Athanasios Road
P.O. BOX 1043, 570 03 AG. ATHANASIOS, GREECE
Tel.: +30 2310 576 000, Fax: +30 2310 722 475

www.isomat.eu
info@isomat.eu

05/2012

ISOMAT_Product List_ 2012

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to ISOMAT_Product List_ 2012 (20)

More from Theodoros Yfantidis (13)

ISOMAT_Product List_ 2012