Ite v5.0 chapter1

© 2008 Cisco Systems, Inc. All rights reserved. Cisco ConfidentialPresentation_ID 1
Chapter 1:
Introduction to the
Personal Computer
IT Essentials 5.0

Presentation_ID 2© 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential
Chapter 0 and 1 Section Objectives
 0.2 Explain IT industry certifications and technician jobs
 1.1 Identify and describe the purpose and characteristics
of the components of Personal Computer Systems
 1.2 Explain the considerations when Selecting
appropriate PC Components
 1.3 Describe the Configurations for Specialized
Computer Systems
 1.4 Summary

CompTIA A+ Certification
An A+ Certification candidate must pass two exams:
1. CompTIA A+ 220-801: Focus on Hardware and Procedures
PC Hardware
Networking
Laptops
Printers
Operational Procedures
2. CompTIA A+ 220-802: Focus on Software and Troubleshooting
Operating Systems
Security
Mobile Devices
Troubleshooting

EUCIP IT Administrator Certification
Modules 1 and 2 covered in this course:
 Module 1: PC Hardware
Includes the functions of the components of a personal
computer, diagnosis and repair of hardware problems, and
selection and recommendation of appropriate hardware
 Module 2: Operating Systems
Includes installing and updating most common operating
systems and applications and using system tools for
troubleshooting and repairing operating systems

Basic Personal Computer System
 A computer system consists of hardware and software
components.
 Hardware is the physical equipment such as the case,
storage drives, keyboards, monitors, cables, speakers,
and printers.
 Software is the operating
system and programs.
 The operating system
instructs the computer how
to operate.
 Programs or applications
perform different functions.

Computer Cases and Power Supplies
Computer case
 Provides protection and support for internal components.
 Should be durable, easy to service, and have enough room for
expansion.
 The size and layout of a case is called a form factor.
 NOTE: Select a case that matches the physical dimensions of the
power supply and motherboard.
Power supply
 Converts AC power from the wall socket into DC.
 Must provide enough power for the installed components
and future additions.

Four Basic Units of Electricity
 Voltage (V) is a measure of the force required to push
electrons through a circuit. Voltage is measured in volts (V).
A computer power supply usually produces several different
voltages.
 Current (I) is a measure of the amount of electrons going
through a circuit. Current is measured in amperes, or amps
(A). Computer power supplies deliver different amperages
for each output voltage.
 Power (P) is voltage multiplied by current. The
measurement is called watts (W). Computer power supplies
are rated in watts.
 Resistance (R) is the opposition to the flow of current in a
circuit. Resistance is measured in ohms (Ω). Lower
resistance allows more current to flow through a circuit.

Ohm’s Law
 There is a basic equation that expresses how three of
the terms relate to each other. It states that voltage is
equal to the current multiplied by the resistance. This is
known as Ohm's Law. V = IR
 In an electrical system, power (P) is equal to the
voltage multiplied by the current. P = VI

Internal Components
 Identify the names, purposes, and characteristics of:
•Motherboards
•CPUs
•Cooling systems
•ROM and RAM
•Adapter cards
•Storage drives
•Internal cables

Motherboards
 The motherboard is the
main printed circuit board.
 Contains the buses, or electrical
pathways found in a computer.
Buses allow data to travel
among the various components.
 Accommodates CPU, RAM, expansion slots, heat
sink/fan assembly, BIOS chip, chip set, sockets, internal
and external connectors, various ports, and the
embedded wires that interconnect the motherboard
components.

Motherboard Form Factors
 The form factor of motherboards pertains to the size
and shape of the board.
 It also describes the physical layout of the different
components and devices on the motherboard.
 Various form factors exist for motherboards.

Central Processing Unit (CPU)
 The CPU is known as the brain of the computer. It is
also referred to as the processor.
 The CPU executes a program, which is a sequence of
stored instructions.
 Two major CPU architectures related to instruction sets:
•Reduced Instruction Set Computer (RISC)
•Complex Instruction Set Computer (CISC)

Central Processing Unit (Continued)
 Some CPUs incorporate hyperthreading or
hypertransport to enhance the performance of the
CPU.
 The amount of data that a CPU can process at one
time depends on the size of the processor data bus.
 Speed of the CPU is measured in cycles per second-
megahertz (MHz) or gigahertz (GHz).
 Overclocking is a technique used to make a processor
work at a faster speed than its original specification.

Central Processing Unit (Continued)
 The latest processor technology has resulted in CPU
manufacturers finding ways to incorporate more than
one CPU core onto a single chip.
Dual Core CPU - Two cores inside a single CPU
Triple Core CPU - Three cores inside a single CPU
Quad Core CPU - Four cores inside a single CPU
Hexa-Core CPU - Six cores inside a single CPU
Octa-Core CPU - Eight cores inside a single CPU

Cooling Systems
 Electronic components generate
heat. Too much heat can
damage components.
 A case fan makes the cooling
process more efficient.
 A heat sink draws heat away
from the core of the CPU. A fan
on top of the heat sink moves the
heat away from the CPU.
 Fans can be dedicated to cool
the Graphics-processing unit
(GPU).
Case Fan
CPU Fan

ROM and RAM
 Read-only memory (ROM)
 Basic instructions for booting the computer and loading the
operating system are stored in ROM.
 ROM chips retain their contents even when the
computer is powered down.
 Random-access memory (RAM)
 RAM is temporary storage for data and programs that are
being accessed by the CPU.
 RAM is volatile memory, which means that the contents are
erased when the computer is powered off.
 More RAM means more capacity to hold and process large
programs and files, as well as enhance system performance.

Memory Modules
 Memory modules are memory chips that have been soldered on to a
special circuit board for easy installation and removal.
 Dual Inline Package (DIP) is an individual memory chip.
 Single Inline Memory Module (SIMM) is a small circuit board that holds
several memory chips.
 Dual Inline Memory Module (DIMM) is a circuit board that holds SDRAM,
DDR SDRAM, and DDR2 SDRAM chips.
 RAM Bus Inline Memory Module (RIMM) is a circuit board that holds
RDRAM chips.
 Small Outline DIMM (SODIMM) is a smaller, more condensed version of
DIMM which provides random access data storage that is ideal for use in
laptops, printers, and other devices where conserving space is desirable.
 The speed of memory has a direct impact on how much data a processor
can process because faster memory improves the performance of the
processor. As processor speed increases, memory speed must also
increase.

Cache and Error Checking
 Cache
•SRAM is used as cache memory to store the most frequently
used data.
•SRAM provides the processor with faster access to the data
than retrieving it from the slower DRAM, or main memory.
 Error Checking
•Memory errors occur when the data is not stored correctly in the
RAM chips.
•The computer uses different methods to detect and correct data
errors in memory
Nonparity
Parity
ECC

Adapter Cards
 Adapter cards increase the functionality of a computer by
adding controllers for specific devices or by replacing
malfunctioning ports.
 Examples of adapter cards:
•Sound adapter and video adapter
•USB, parallel, and serial ports
•Network Interface Card (NIC),
wireless NIC, and modem adapter
 Types of expansion slots:
•Peripheral Component Interconnect (PCI)
•Advanced Graphics Port (AGP)
•PCI-Express
•Mini PCI (laptops)

Storage Drives
 Storage drives read or write information to magnetic storage media.
 They may be fixed or removable.
 The hard disk drive (HDD) is a
magnetic storage device. The storage
capacity is measured in gigabytes (GB) or terabytes (TB)
 Magnetic hard drives have drive motors designed to spin magnetic platters
and move the drive heads.
 Solid state drives (SSDs) do not have moving parts, which results in
faster access to data, higher reliability, reduced power usage.
 A floppy disk drive (FDD) is storage device that
uses removable 3.5 inch floppy disks that can store
up to 1.44 MB of data.

Optical Drives, Flash Drives and Drive
Interfaces
 An optical drive is a storage device that uses lasers to
read data on the optical media. The three types are CD,
DVD, and BD (Blu-ray).
 A flash drive is a removable storage device that
connects to a USB port. A flash drive uses a type
of memory that requires no power to maintain the
data.
 Common drive interfaces are:
•Integrated Drive Electronics (IDE)
•Enhanced Integrated Drive Electronics (EIDE)
•Parallel ATA (PATA)
•Serial ATA (SATA) and External SATA (eSATA)
•Small Computer System Interface (SCSI)

RAID Levels
 RAID provides a way to store data across multiple hard disks for
redundancy.
RAID
Level
Min # of
Drives
Description
0 2 Data striping without redundancy
1 2 Disk mirroring
2 2 Error-Correcting Coding
3 3 Byte-level data striping with dedicated parity
4 3 Block-level data striping with dedicated parity
5 3 Block-level data striping with distributed parity
6 4 Independent Data Disks with Double Parity
0/1 4 Combination of data striping and mirroring
10 4 Mirrored set in a striped set

Internal Cables
 Power supply connectors- SATA, Molex, and
Berg.
 Front panel cables connect the case buttons
and lights to the motherboard.
 Data cables connect drives to the drive
controller.
• Floppy disk drive (FDD) data cable
• PATA (IDE) data cable (40 conductor)
• PATA (EIDE) data cable (80 conductor)
• SATA data cable
• SCSI data cable

Video Ports and Cables
 A video port connects a monitor cable to a
computer. Video ports and connector types:
DVI, Displayport, RCA, DB-15, BNC, RJ-45, MiniHDMI,
Din-6
 Display cables transfer video signals from the
computer to display devices. Display cable
types:
High-Definition Multimedia Interface (HDMI), DVI, Video
Graphics Array (VGA), Component/RGB, Composite,
S-Video, Coaxial, Ethernet,

Ports and Cables
 Serial ports transmit one bit of data at a time.
 A telephone cable (RJ11) is used to connect a modem to
a telephone outlet.
 USB is a standard interface for connecting hot-swappable
peripheral devices to a computer. Some devices can also
be powered through the USB port.
 FireWire is a high-speed, hot-swappable interface that can
support up to 63 devices. Some devices can also be
powered through the FireWire port.
 A parallel cable is used to connect parallel devices, such
as a printer or scanner, and can transmit 8 bits of data at
one time.

Ports and Cables (Continued)
 A SCSI port can transmit data at rates in excess of 320
Mbps and can support up to 15 devices. SCSI devices
must be terminated at the endpoints of the SCSI chain.
 A network port, also known as an RJ-45 port,
connects a computer to a network. The maximum
length of network cable is 328 feet (100 m).
 A PS/2 port connects a keyboard or a mouse to a
computer. The PS/2 port is a 6-pin mini-DIN female
connector.
 An audio port connects audio devices to the computer.
 A video port connects a monitor cable to a computer.

Input Devices
 Input devices are used to enter data or
instructions into a computer:
•Mouse and Keyboard
•KVM switch
•Gamepad and joystick
•Digital camera and digital video
camera
•Biometric authentication device
•Touch screen
•Scanner

Output Devices
 Monitors and Projectors:
•Cathode-ray tube (CRT) has three
electron beams. Each beam directs colored
phosphor on the screen that glows either
red, blue, or green.
•Liquid crystal display (LCD) is commonly
used in laptops and some projectors. LCD
comes in two forms, active matrix and
passive matrix.
•A light-emitting diode (LED) display is an
LCD display that uses LED backlighting to
light the display.
•An Organic LED (OLED) display uses a
layer of organic material that responds to
electrical stimulus to emit light.

Output Devices (Continued)
 Printers and Fax Machines are output
devices that create hard copies of
computer files.
 Scanners create electronic file versions
of paper documents.
 Speakers and headphones are output
devices for reproducing audio signals.
Speakers
Headphones

Output Devices (continued)
 Monitors and Projectors:
•Plasma - Plasma displays are another type of flat panel monitor
•Digital light processing (DLP) is a technology used in
projectors.
•Monitor Resolution refers to the level of image detail that can
be reproduced. Higher resolution settings produce better image
quality.
•Several factors are involved in Monitor Resolution –Pixel, Dot
Pitch, Contrast Ratio, Refresh rate, Interlace/Non-Interlace,
Horizontal vertical color, Aspect ratio, Native resolution

Selecting Case and Power Supply
 Determine the customer's needs
before making any purchases or
performing upgrades.
•A power supply should support
25 percent more wattage than all the
attached components require.
 The computer case holds the power
supply, motherboard, memory, and
other components.
 When purchasing a new computer case and power
supply separately, ensure that all of the components will
fit into the new case and that the power supply is
powerful enough to operate all of the components.

Selecting a Motherboard
 When selecting a replacement motherboard, make sure
it supports the CPU, RAM, video adapter, and other
adapter cards.
 The socket and chip set on the motherboard must be
compatible with the CPU.
 The motherboard must accommodate the existing heat
sink/fan assembly.
 The existing power supply must have connections that
fit the new motherboard.
 The number and type of expansion slots
must match the existing adapter cards.
 The new motherboard must physically
fit into the current computer case.

Selecting a CPU
 Replace the CPU when it fails or is no longer
adequate for the current applications.
 Make sure the CPU is compatible with the
existing motherboard:
•The new CPU must use the same socket type or slot type and
chip set.
•The BIOS must support the new CPU.
•The new CPU may require a different heat sink/fan assembly.
•Make sure the correct voltage is maintained.
•Use manufacturers' websites to investigate the compatibility
between CPUs and other devices.

CPU Features and Classification
 Multi-core processors - RAM is shared between the
processors
 Cache memory - L1, L2, and L3
 Speed of a processor - maximum speed
without errors
 Front Side Bus (FSB) - path between the CPU and
chip set, expansion cards, and RAM
 32-bit and 64-bit - number of instructions handled
by the processor at one time

Selecting Heat Sink/Fan and Case Fan
 Heat sink/fan assembly
considerations:
• Socket type
• Motherboard physical
specifications
• Case size
• Physical environment
 Case fan considerations:
• Case size
• Fan speed
• Number of components in
the case
• Physical environment
• Number of mounting
places available
• Location of mounting
places available
• Electrical connections

Selecting RAM
 New RAM may be needed when an application locks up
or the computer displays frequent error messages
 When selecting new RAM,
check the compatibility with
the current motherboard.
 The speed of the new RAM
must be the same or faster
than the existing RAM.

Selecting Adapter Cards
 Adapter (or expansion) cards add extra functionality to
a computer. Before purchasing an adapter card, check:
• Is there an open expansion slot?
• Is the adapter card compatible with the open
slot?
• What are the customer’s current and future
needs?
• What are the possible configuration options?
If the motherboard does not have compatible
expansion slots, external devices are an option:
• Are USB or FireWire versions of the external
device available?
• Does the computer have an open USB or
FireWire port?

Selecting Hard Drives and Floppy Drives
 The signs that a hard drive is failing and should be
replaced as soon as possible:
•Unusual noises
•Error messages
•Corrupt data or
applications
 Replacement options:
•Solid State Drives
•Optical Drives
•External Storage
•Hard Drive
•Floppy Disk Drive (limited use)

Hard Drive Connectors
 PATA (Parallel ATA) hard drives
•Originally, called ATA (Advanced Technology Attachment).
•With the introduction of SATA, ATA was renamed to PATA.
•Can use a 40-pin / 80-conductor cable or a 40-pin / 40-
conductor cable.
 SATA (Serial ATA) hard drives
•Connect to the motherboard using a serial interface.
•Have a higher data-transfer rate than PATA drives.
•Smaller data cable allows for improved airflow.
• eSATA external SATA
 SCSI (Small Computer Systems Interface) hard drives
•use a 50-pin, 68-pin, or 80-pin connector.
•Up to 15 SCSI drives can be connected to a SCSI drive
controller.

Small Computer Systems Interface
(SCSI)
 Usually used for hard drives and for tape storage .
 Ideal for high-end computers,
including network servers that
require high transfer speeds
and reliability.
 SCSI devices are connected in
a series, forming a chain that is
called a daisy chain.
 Each end of the daisy chain is
terminated to prevent signal
reflections and interference.
 Each device must have a unique SCSI ID.

SCSI Types

Selecting Solid State Drives
 Solid State Drives (SSD) use static RAM instead of
magnetic platters to store data.
 SSDs are highly reliable because they have no moving
parts.
 Considerations when selecting:
Cost
Internal or external
Case location
System compatibility
Power requirements
Speed
Capacity

Selecting Media Readers
 Media Reader -device that reads and writes to
different types of media cards, found in a digital
camera, smart phone, or MP3 player.
Internal or external
Type of connector used
Type of media cards supported

Selecting Optical Drives
 An optical drive uses a laser to read and write data to and from
optical media.
 CD-ROM drive can only read CDs.
 CD-RW can read and write to CDs.
 DVD-ROM drive can only read DVDs and CDs
 DVD-RW can read and write to DVDs and CDs. DVDs hold
significantly more data than CDs
 A Blu-ray reader (BD-R) can only read Blu-ray Discs, DVDs, and
CDs.
 A Blu-ray writer (BD-RE) can read and write to Blu-ray Discs and
DVDs. Blu-ray Discs hold significantly more data than DVDs.

Selecting External Storage
 External storage connects to an external port
such as a USB, IEEE 1394, SCSI, or eSATA.
Port type
Storage capacity
Speed
Portability
Power requirements

Selecting Input and Output Devices
 FireWire (IEEE 1394) - Transfers data at 100, 200, or 400 Mbps
and IEEE 1394b at 800 Mbps.
 Parallel (IEEE 1284) - Transfers data at a maximum speed of 3
MBps.
 Serial (RS-232) - Early versions were limited to 20 Kbps, but
newer versions can reach transfer rates of 1.5 Mbps.
 SCSI (Ultra-320 SCSI) - Connects as many as 15 devices with a
transfer rate of 320 MBps.
 USB interface is widespread and used with many different
devices. USB (1.1) , USB 2.0 and USB 3.0.
 SATA interface is replacing IDE and EIDE as the standard
interface for hard drives. The eSATA (external SATA) connection
can be hot-swappable.

Specialized Computer Systems
 CAD or CAM (CAx) workstation
Powerful processor
High-end video card
Maximum RAM
 Audio and video editing workstation
Specialized audio card
Specialized video card
Large, fast hard drive
Dual monitors
 Virtualization workstation
Maximum RAM
Maximum CPU cores

Specialized Computer Systems
 Gaming PC
Powerful processor
High-end video card
High-end sound card
High-end cooling
Large amounts of fast RAM
Fast storage
Gaming-specific hardware
 Home Theater Personal Computer (HTPC)
Specialized cases and power supplies
Surround sound audio
HDMI output
TV tuners and cable cards
Specialized hard drive

Chapter 1 Summary
 Information Technology encompasses the use of
computers, network hardware, and software to process,
store, transmit, and retrieve information.
 A personal computer system consists of hardware
components and software applications.
 The computer case and power supply must be chosen
carefully to support the hardware inside the case and
allow for the addition of components.
 The internal components of a computer are selected for
specific features and functions. All internal components
must be compatible with the motherboard.

Chapter 1 Summary (Continued)
 Use the correct type of ports and cables when
connecting devices.
 Typical input devices include the keyboard, mouse,
touch screen, and digital cameras.
 Typical output devices include monitors, printers, and
speakers.
 Updating computer components, such as cases, power
supplies, the CPU and cooling system, RAM, hard
drives, and adapter cards, must be done when devices
fail or no longer meet customer needs
 Specialized computers require hardware specific to their
function.

Ite v5.0 chapter1

More Related Content

What's hot (20)

Similar to Ite v5.0 chapter1 (20)

Recently uploaded (20)

Ite v5.0 chapter1

Editor's Notes