Ix1000 Pro-MPEG/SMPTE 2022 FEC Inserter MPEG over IP
0 likes1,136 views
The document introduces the ix1000 IP-MPEG gateway from Path 1, designed to facilitate H.264/MPEG-4 video services over IP networks. It outlines how the ix1000 enables broadcasters to maintain reliable connectivity and provides monitoring tools for assessing network performance, including metrics for packet loss and jitter. The document also describes configuration processes for transmitting and receiving multiple video programs across different IP networks.
Ix1000 Pro-MPEG/SMPTE 2022 FEC Inserter MPEG over IP
- 1. Perfect Video Over IP Ix1000 IP-MPEG Gateway Product Introduction Path 1 is a division of IPVN Copyright 2009 IP Video Networks, Inc.
- 2. With the Ix1000 any teleport Teleport Interconnects The Ix1000 is an IP network enabler is within reach for H.264/MPEG-4 services. Broadcasters and teleports can interconnect across virtually all IP networks
- 3. Connect content producers to distribution headends Headend Interconnect Local broadcasters and service using the Ix1000 providers can maintain reliable and cost-effective connectivity through any IP network.
- 4. Monitor IP Video services with the Ix1000’s powerful Metrics network metrics Loss Period (LP) measure the total number of lost consecutive packets 100 10 1000 Packets/Min Jitter - Max Loss Distance (LD) measure the time and packet spacing between losses Jitter characterize variable latency of packet arrival
- 5. SMPTE 2022 Smart Packet Interleaving and ClearPath Pro™ The Ix1000 maintains a near-perfect constant bit-rate output, eliminating transmission common bandwidth throttling and burst error problems. protocols Enhanced Burst Loss The ClearPath enabled Ix1000 provides an enhanced tolerance to large packet loss, which may occur in Internet and multiple IP network services. Firewall Friendly The ClearPath protocol supports single UDP transmission for FEC and Program data. Click SMPTE logo to visit store to purchase SMPTE 2022 standard
- 6. RepliCast™ or Multicast RepliCast programs to many receivers If multiple receivers are connected through different providers, multicast will not work. An Ix1000 can send any of its 24 programs to 32 unicast destinations. Multicast In private IP networks, a single transmitter can efficiently deliver a perfect video program to any authorized subscribing receivers.
- 7. Teleport Interconnect – an Ix1000 configuration example The Scenario A broadcaster in the UK must reach a teleport in India with 4 (24/7)programs, and would like to use a local Internet service provider. The 4 programs will go across several IP networks. P1 P1 The Indian teleport must manage the entire service from the teleport P2 IP P2 and optimize latency and bandwidth. P3 Tx Internet Enabled IP-MPEG v Rx P3 P4 P4
- 8. Teleport Interconnect – An Ix1000 configuration example Basic Setup Process – Tx unit 1.Configure IP:UDP inputs {P1- P4}from MPEG encoder 2.Provide the transmitting unit with IP:UDP outputs to destination Rx 1 3 2 unit Inputs Connections Outputs P1 192.168.1.1:22100 FEC (L), (D) 64.10.200.46:22100 3.Enable connections, selecting a 192.168.1.2:22100 FEC (L), (D) 64.10.200.46:22104 suitable SMPTE 2022 or ClearPath P2 192.168.1.3:22100 FEC (L), (D) 64.10.200.46:22108 Pro FEC scheme for bandwidth, latency and loss protection P3 Tx 192.168.1.4:22100 FEC (L), (D) 64.10.200.46:22112 4.Transmission begins P4
- 9. Teleport Interconnect – An Ix1000 configuration example Basic Setup Process - Rx 1.Configure IP:UDP inputs {P1- P4}from Ix1000 Tx unit, including jitter tolerance 2.Provide IP:UDP outputs to 1 3 2 destination decoders/receivers Inputs Connections Outputs 3.Enable connections, selecting FEC 64.10.200.46:22100 FEC - enabled 10.1.1.1:22100 P1 decoding for each program 64.10.200.46:22104 FEC - enabled 10.1.1.2:22100 64.10.200.46:22108 FEC - enabled 10.1.1.3:22100 P2 4.Output begins and flows are monitored 64.10.200.46:22112 FEC - enabled 10.1.1.4:22100 Rx P3 P4
- 10. Teleport Interconnect – an Ix1000 configuration example The Scenario A broadcaster in the UK must reach a teleport in India with 4 (24/7)programs, and would like to use a local network provider. The 4 programs will go across several IP networks. P1 P1 The Indian teleport must manage the entire service from the teleport P2 P2 and optimize latency and bandwidth. P3 Tx Internet EnabledvIP-MPEG Rx P3 Internet Enabled IP-MPEG P4 P4
- 11. Options on an Ix1000 Considerations • How many Ix1000s are required? (up to 24 programs in Replicast a single Ix) • How many unique programs 5, 10 or 30 unicast destinations will the transmit and receive units process? • How many sites will my programs go to? Is multicast Ports available or will RepliCast be required? 1 to 24 total unique programs. an input:output constitutes a “port”
- 12. Options on an Ix1000 cont. Considerations 1 MPEG-TS, 3 Receivers • How many Ix1000s are required? (up to 24 programs in a single Ix) (3) 1 port units, Replicast 0 • How many unique programs will the transmit and receive (1) 1 port unit, Replicast 5 units process? • How many sites will my programs go to? Is multicast available or will RepliCast be required?
- 13. Contact Us Thank You sales@path1.com 1-(858)-366-4391