J0525460

IOSR Journal of Electronics and Communication Engineering (IOSR-JECE)
e-ISSN: 2278-2834,p- ISSN: 2278-8735. Volume 5, Issue 2 (Mar. - Apr. 2013), PP 54-60
www.iosrjournals.org

Comparison between Different Wireless Sensor Simulation Tools
Mrs. Poonam Chhimwal1, Dhajvir Singh Rai2, Deepesh Rawat3
1
Asst. Prof.( Department of Computer Science),BTKIT Dwarahat, Uttarakhand,India
2
M.Tech(Computer Science & Engineering),BTKIT Dwarahat Uttarakhand,India
3
M.Tech(Digital Communication) BTKIT Dwarahat Uttarakhand,India

Abstract: Wireless sensor network have recently come into prominence because they hold the potential to
revolutionize segment of our economy and life with its wide applications. Unlike a centralized system, a sensor
network is formed by large numbers of networked sensing nodes. They are having unique set of resource
constraints such as finite onboard battery power and limited network communication bandwidth. Since running
real experiments is costly and time consuming, simulation is essential to study Wireless Sensor Networks (WSN).
It is rather complex, or even unfeasible, to model analytically a WSN and it usually leads to oversimplified
analysis with limited confidence. Therefore, simulation is essential to study WSN. The word “wise” in the title
indicate the meaning most appropriate according to their usage and testing
Keywords: Sensor network, simulation, tools.

I. INTRODUCTION
The sensors have the ability to transmit and forward sensing data to the base station. Most modern
WSNs are bi-directional, enabling two-way communication, which could collect sensing data from sensors to
the base station as well as disseminate commands from base station to end sensors.
The development of WSNs was motivated by military applications such as battlefield surveillance; WSNs are
widely used in industrial environments, residential environments and wildlife environments. Structure health
monitoring, healthcare applications, home automation, and animal tracking have become representative of
Wireless sensor networks applications [1].
The sensor chip sprayed on roads, walls or machine creates a digital skin that senses the physical phenomena of
interest:-
 It can monitor the vehicular traffic, Pedestrian, intelligent transportation grid.
 It can report wildlife habitat condition for environment conservation.
 It helps in detecting forest fire.
 It can track job flow and supply chain in industries..

II. SENSOR NETWORK PROTOCOL
The Wireless sensor network consists of various sensor nodes as shown in fig 1. They are having
unique set of resource constraints such as finite onboard battery power and limited bandwidth.
The protocol stack consists of the application layer, transport layer, network layer, data link layer,
physical layer, power management plane, mobility management plane, and task management plane as shown in
Fig 2. Depending on the sensing tasks, different types of application software can be built and used on the
application layer.
Sensing Field

Gate
way
Sensor nodes

Internet

User

Fig 1: A Wireless Sensor Network

www.iosrjournals.org 54 | Page


Simulation is essential to study WSN. It requires suitable model based on solid assumption and appropriate
framework to ease implementation. Simulation is the process of designing a model of a real system and
conducting experiments with this model for the purpose of either understanding the behaviour of the system
and/or evaluating various strategies for the operation of the system. A detailed discussion of simulation
methodology, in general, can be found in [11, 12].

Power

Application Mobility

Task Mgmt
Transport layer

Network layer

Data Link layer

Physical Layer

Fig 2:-The sensor networks protocol stack

The simulation result depends upon on the environment and physical layer assumption which may not be
accurate to predict the real behavior of wireless sensor network. Simulation is necessary to test the application
and protocols in this field. The correctness of the model and Suitability of model for the implementation are
necessary factors of WSN simulations.
The key properties of good Simulator:-
 Reusability and availability
 Performance and scalability.
 Support for rich-semantics scripting languages to define experiments and process results.
 Graphical, debug and trace support.

III. A MODEL FOR WSN SIMULATION
A. 3.1 Network model
The following components are considered as shown in Fig 3 [4][5]:
1. Nodes: Each node is a physical device monitoring a set of physical variables. Nodes communicate with
each other via a common radio channel.
2. Environment: The main difference between classical and WSN models are the additional “environment”
component. This component models the generation and propagation of events that are sensed by the nodes,
and trigger sensor actions, i.e. communication among nodes in the network. The events of interest are
generally a physical magnitude as sound or seismic waves or temperature.

Node 1
Radio channel

Environment

Agent

Node 2
Sink

Node
n

Fig3: Wireless Sensor Network Model



3. Radio channel: It characterizes the propagation of radio signals among the nodes in the network. Very
detailed models use a “terrain” component, connected to the environment and radio channel components.
The terrain component is taken into consideration to compute the propagation as part of the radio channel,
and also influences the physical magnitude.
4. Sink nodes: These are special nodes that, if present, receive data from the net, and process it. They may
interrogate sensors about an event of interest. The use of sinks depends on the application and the tests
performed by the simulator.
5. Agents: The agent may cause a variation in a physical magnitude, which propagates through the
environment and stimulates the sensor. This component is useful when its behavior can be implemented
independently from the environment, e.g., a mobile vehicle. Otherwise, the environment itself can generate
events.

B. 3.2 Node model
This model divides a node into abstract tiers as shown in Fig 4 [4] [5]:-
The protocol tier comprises all the communication protocols. Typically, three layers coexist at this tier: A
MAC layer, a routing layer and a specific application layer.
The Physical node tier represents the hardware platform and its effects on the performance of the
equipment.
The media tier is the link of the node with the “real world”. A node is connected with the environment
through:
(1) A radio channel, and (2) Through one or more physical channels

Protocol Tier

Physical Node
Tier

.
Media Tier

Fig 4: Tier-based Node Model

IV. WSN SIMULATION SOFTWARE
To get an insight into the simulation tools used in the selected IEEE Journal and Conference published
papers, Nurul I. Sarkar et. al. [10] surveyed all papers published in the IEEE Transactions on Communications
(1071 papers), IEEE/ACM Transactions on Networking (377 papers), and in proceedings of IEEE GLOBECOM
(2991papers), INFOCOM (817 papers), and ICC (3114 papers) between 2007 and 2009. A total of 8370 papers
were surveyed. The survey results were summarized about 42.8% of 8370 papers surveyed have mentioned that
they use ns-2 for network modeling and simulation tasks. About 36.8% of the total papers surveyed have used
MATLAB whereas 7.6% used OPNET. The remaining 4.2%, 1.6% and 0.8% of the total papers surveyed have
used QualNet, GlomoSim, and OMNet++, respectively. And about 6.2% of the papers surveyed did not bother
to mention the name of the simulators that they had used. That’s why I have chosen the five below mentioned
tools on the basis of their widely accepted usage.

4.1 NS-2
NS-2 is the abbreviation of Network simulator version two, which first been developed by 1989 using
as the REAL network simulator [2][3]. Now, NS-2 is supported by Defense Advanced Research Projects
Agency and National Science Foundation. NS-2 is a discrete event network simulator built in Object- Oriented
extension of Tool Command Language and C++. People can run NS-2 simulator on Linux Operating Systems or
on Cygwin, which is a Unix-like environment and command-line interface running on Windows. NS-2 is a
popular non-specific network simulator can used in both wire and wireless area. This simulator is open source
and provides online document.
Language:-
Object- Oriented extension of Tool Command Language and C++
Key feature:-



 NS-2 extensibility features.
 Object oriented design allow creating and using of new protocol.
 It provide visualization tool-NAM (Network Animator)
Limitation:-
However, this simulator has some limitations [2][3].
 People who want to use this simulator needs to be familiar with writing scripting language and modeling
technique; the Tool Command Language is somewhat difficult to understand and write.
 Sometimes using NS-2 is more complex and time-consuming than other simulators to model a desired job.
 NS-2 provides a poor graphical support, no Graphical User Interface (GUI); the users have to directly face
to text commands of the electronic devices.
 Due to the continuing changing the code base, the result may not be consistent, or contains bugs.

4.2 NS-3
The NS-3 simulator is an open-source and discrete-event network simulator specially meant for research and
educational use. It was first developed in 2006.Many version have been so far released after its first
development. The recent version NS-3.13 was released on 23 December 2011.

Language:-
C++, Python

Key feature:-
 NS-3 is not an extension of NS-2; it is a new simulator. The two simulators are both written in C++ but NS-
3 is a new simulator that does not support the NS-2 APIs. Some models from ns-2 have already been ported
from NS-2 to NS-3. The project will continue to maintain NS-2 while NS-3 is being built, and will study
transition and integration mechanisms.
 NS-3 is open-source, and the project strives to maintain an open environment for researchers to contribute
and share their software.
Limitation:-
 Python bindings do not work on Cygwin [9].
 Only IPv4 is supported [9].

4.3 TOSSIM
It is discrete event simulator for TinyOS Wireless Sensor Network, which is open source operating
system targeting embedded operating system [3]. It was first developed at UC Berkeley. TOSSIM is a bit-level
discrete event network emulator built in Python, a high-level programming language emphasizing code
readability, and C++. People can run TOSSIM on Linux Operating Systems or on Cygwin on Windows.
TOSSIM also provides open sources and online documents.
Environment:
It runs on custom mote hardware. It chooses the accuracy and complexity of model necessary for their
simulation.
Language:-
Python, NesC, C++
Key Features:
It provides interaction with the networks due to its graphical support. Packet can be dynamically injected into
the network. Packet traffic can be easily monitored in his way.
Advantages:
 Open Source and online documentation
 Graphical User Support (Tiny ViZ)
 Simple and powerful emulator for Wireless sensor Network [3]
 Support thousand of Nodes

Limitation:
It is specially designed for tinyOS, not designed for simulation performance metrics of other new protocol
[3].Therefore, TOSSIM cannot correctly simulate issues of the energy consumption in WSN; people can use
PowerTOSSIM, another TinyOS simulator extending the power model to TOSSIM, to estimate the power
consumption of each node. Secondly, every node has to run on NesC code, a programming language that is
event-driven, component-based and implemented on TinyOS, thus TOSSIM can only emulate the type of
homogeneous applications. Thirdly, because TOSSIM is specifically designed for WSN simulation, motes-like



nodes are the only thing that TOSSIM can simulate. In sum, TOSSIM as an emulator of WSN contains both
advantages and disadvantages.

4.4 OMNeT++
Modular discrete event simulator implemented in C++. Getting started with it is quite simple, due to its clean
design. OMNET++ also provides a powerful GUI library for animation and tracing and debugging support. Its
major drawback is the lack of available protocols in its library, compared to other simulators [3].
However, OMNET++ is becoming a popular tool and its lack of models is being cut down by recent
contributions. For instance, a mobility framework has recently been released for OMNET++ , and it can be used
as a starting point for WSN modeling. Additionally, several new proposals for localization and MAC protocols
for WSN have been developed with OMNET++, under the Consensus project, and the software is publicly
available. Nevertheless, most of the available models have been developed by independent research groups and
do not share a common interface, what makes difficult to combine them. As an example, not even the
localization and MAC protocols developed in the Consensus project are compatible.
Advantages:
 Powerful Graphical User Interface (making tracing and bugging easier)
 Simulate power Consumption problem
Limitation:
 Number of protocol is not large enough.
 Compatibility problem (not portable)
We can say that both advantages and disadvantages are included in the OMNeT++ design.

4.5 J-Sim
A component-based simulation environment developed entirely in Java. It provides real-time process based
simulation. The main benefit of J-Sim is its considerable list of supported protocols, including a WSN
simulation framework with a very detailed model of WSNs, and a implementation of localization, routing and
data diffusion WSN algorithms [2]. J-Sim models are easily reusable and interchangeable offering the maximum
flexibility. Additionally, it provides a GUI library for animation, tracing and debugging support.
Advantages:
 Models in J-Sim have good reusability and interchangeability, which facilities easily simulation [2].
 J-Sim contains large number of protocols; this simulator can also support data diffusions, routings and
localization simulations in WSNs by detail models in the protocols of J-Sim. J-Sim can simulate radio
channels and power consumptions in WSNs.
 J-Sim provides a GUI library, which can help users to trace and debug programs. The independent platform
is easy for users to choose specific components to solve the individual problem. Fourth, comparing with
NS-2, J-Sim can simulate larger number of sensor nodes, around 500, and J-Sim can save lots of memory
sizes.
Limitation:
 J-Sim is relatively complicated to use.
 The execution time is much longer than that of NS-2.
4.6 Castalia
Castalia is a simulator for Wireless Sensor Networks (WSN), Body Area Networks (BAN) and generally
networks of low-power embedded devices. It is based on the OMNeT++ platform and can be used by
researchers and developers who want to test their distributed algorithms and/or protocols in realistic wireless
channel and radio models, with a realistic node behavior especially relating to access of the radio. Castalia can
also be used to evaluate different platform characteristics for specific applications, since it is highly parametric,
and can simulate a wide range of platforms [7].
Key Features:-
 Advanced channel model based on empirically measured data.
 Advanced radio model based on real radios for low-power communication.
 Extended sensing modeling provisions
 Node clock drift
 MAC and routing protocols available.
 Designed for adaptation and expansion.
Limitation:-
Castalia is not sensor-platform specific.



4.7 QualNet
A Commercial derivation of GloMoSim based on C++. It was released in 2000 by Scalable Network
Technology (SNT).GloMoSim is academic research version (an open source) but QualNet[8] is commercial
version. It is GUI based model used for design, animation and analysis.
Key Features:-
 High fidelity commercial protocol and device models.
 Comparative performance evaluation of alternative protocol at each layer.
 Built in measurement on each layer.
 Modular layer stack design.
 Scalability via support for parallel execution.

V. COMPARISONS BETWEEN DIFFERENT SIMULATORS
The key features and limitations of each of these simulators are highlighted in Table 1.

No Progra Merits Demerits
r
Simulato

ming
languag
e
1 -Easy to add new protocols. -Supports only two wireless MAC
Ns-2

C++ -A large number of protocols available protocols, 802.11, and a single-hop
publicly. TDMA protocol.
-Availability of a visualization tool. -Need to familiar with writing
scripting language
2 C++ -NS-3 is not an extension of NS-2; it is -Python bindings do not work on
NS-3

a new simulator. Cygwin.
-NS-3 is open-source -Only IPv4 is supported.

3 -High degree of accuracy or running -Compilation steps lose the fine
M
TOSSI

nesC the application source code unchanged. grained timing and interrupt
-Availability of a visualization tool. properties of the code.

4 -Provides support for energy modeling, -Low efficiency of simulation.
J-Sim

Java with the exception of radio energy -The only MAC protocol provided
consumption for wireless networks is 802.11.
-Support mobile wireless networks and -Unnecessary run-time overhead
sensor networks.
-Component-oriented architecture.
5 -Powerful graphical User Interface -Number of protocol is not large
++
OMNeT

C++ (making tracing and bugging easier) enough.
-Simulate power Consumption problem -Compatibility problem (not
portable)
6 -Physical process modeling, sensing -Not a sensor specific platform.
Castalia

C++ device bias and noise, node clock drift, -Not useful if one would like to test
and several MAC and routing protocols code compiled for a specific sensor
implemented. node platform.
-Highly tunable MAC protocol and a
flexible parametric physical process
model.
7 C++ -Easy-to-use and clear User Interface. -Difficult installation on Linux.
QualNet

-Sophisticated animation capabilities. -Slow Java-based UI.
-Support for multiprocessor systems -Very expensive.
and distributed computing.

Table 1. Comparison between different wireless sensor simulation tools.



VI. CONCLUSION

Simulation is an essential tool to study Wireless Sensor Networks due to the unfeasibility of analysis
and the difficulties of setting up real experiments. This study provides guidelines to help selecting a suitable
simulation model for a WSN and a comprehensive description of the most used available tools. The goals of this
paper have been to provide comprehensive study and background on a number of different sensor network
simulators and present the pros and cons of each simulator. Knowledge of the strengths and weaknesses of a
number of different simulators is valuable because it allows users to select the one most appropriate for their
testing.

REFERENCES
[1] D. Estrin, R. Govindan, J. Heidemann, S. Kumar, “Next century challenges: scalable coordination in sensor networks”, ACM
MobiCom’99, Washington, USA, 1999, pp. 263–270.
[2] Sourendra Sinha, Zenon Chaczko, Ryszard Klempous, “SNIPER: A Wireless Sensor Network Simulator”, Computer Aided Systems
Theory- EUROCAST , 2009, Volume 5717/2009, pp. 913-920
[3] E. Egea-Lopez, J. Vales-Alonso, A. S. Martinez-Sala, P. Pavon-Marino, J. Garcia-Haro; “Simulation Tools for Wireless Sensor
Networks”, Summer Simulation Multiconference, SPECTS, 2005, pp.2-9
[4] S. Park, A. Savvides, M. B. Srivastava. “SensorSim: A Simulation Framework for Sensor Networks.” In Proc. ACM Modeling,
Analysis and Simulation of Wireless and Mobile Systems (MSWiM 2000), Boston, MA, pp. 104–111, August 2000
[5] A. Sobeih, W. Chen, J. C. Hou, L. Kung, N. Li, H. Lim, H. Tyan, H. Zhang, “J-Sim: A simulation and emulation environment for
wireless sensor networks.” In Proc. Annual Simulation Symposium (ANSS 2005), San Diego, CA, pp. 175–187, April2005.
[6] Harsh Sundani, Haoyue Li, Vijay K. Devabhaktuni, Mansoor Alam, & Prabir Bhattacharya, “Wireless Sensor Network Simulators A
Survey and Comparisons.” International Journal of Computer Networks (IJCN), Volume2: Issue 5, 2010, pp 250
[7] http://castalia.npc.nicta.com.au/documentation.php
[8] Tobias Doerel, “Simulation of wireless ad-hoc sensor networks with QualNet”, Chemnitz, 2009
[9] The NS-3 network simulator :http://www.nsnam.org/
[10] Nurul I. Sarkar and Syafnidar A. Halim,” A Review of Simulation of Telecommunication Networks: Simulators, Classification,
Comparison, Methodologies, and Recommendations”, Multidisciplinary Journals in Science and Technology, Journal of Selected
Areas in Telecommunications (JSAT), March Edition, 2011
[11] A. M. Law and W. D. Kelton, “Simulation modelling and analysis”, third Edition. New York: McGraw-Hill, 2000.
[12] J. S. Carson II, "Introduction to Modeling and Simulation," Winter Simulation Conference, December, 2004, pp. 1283-1289.


J0525460

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to J0525460 (20)

More from IOSR Journals (20)

J0525460