Keylight 1.2 ae

USER GUIDE
Keylight on After Effects

Visual Effects Software The Foundry

©2011 The Foundry Visionmongers Ltd. All rights reserved.
Keylight User Guide
This manual, as well as the software described in it, is furnished under license and may only be used or copied in accordance with
the terms of such license. This manual is provided for informational use only and is subject to change without notice. The Foundry
assumes no responsibility or liability for any errors of inaccuracies that may appear in this book.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted in any form without the prior written
permission of The Foundry.

The Foundry logo is a trademark of The Foundry Visionmongers Ltd. After Effects is a registered trademark of Adobe Systems
Incorporated. All other products or brands are trademarks or registered trademarks of their respective companies or
organisations.

Software engineering Ralph McEntagart, Lucy Wilkes, Andy Whitmore, Bruno Nicoletti, Simon Robinson, and Jack Binks.

Initial algorithm development Wolfgang Lempp and Oliver James.

Product testing Rob Elphick, Jonathan Barson, and Dan Allum.

Writing and layout design Jonathan Barson, Tytti Pohjola, and Eija Narvanen using Adobe FrameMaker.

Proof reading Eija Narvanen.

The Foundry Keylight

CONTENTS iii

CONTENTS

Introduction About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Example Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About The Foundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Getting Started Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Quick Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Basic Keying Basic Workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Screen Colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Despill Bias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Advanced Keying Screen Colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Despilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Screen Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Screen Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Clip Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Status View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Screen Matte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Clip Rollback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Grow & Shrink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Despot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Colour Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Inside & Outside Masks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Source Alpha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Colour Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Edge Colour Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Source Crops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Tutorial Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Example Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Tutorial 1: Simple Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Tutorial 2: Fine Tuning a Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Tutorial 3: Extreme Blue Spill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Tutorial 4: A Red Green Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40


CONTENTS iv

Tutorial 5: Inside & Outside Masks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Appendix A Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Appendix B Third Party Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appendix C End User License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Index A-Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67


INTRODUCTION 5
About this Manual

INTRODUCTION

Welcome to this User Guide for Keylight on After Effects.

Keylight is an industry-proven blue and green screen keyer. The core
algorithm was developed by The Computer Film Company (now Framestore)
and has been further developed and ported to After Effects by The Foundry.

We hope you enjoy using Keylight.

About this Manual Use the Quick Key chapter to see how a simple key is pulled using Keylight.
The Basic Keying Chapter goes over the most common parameters you’ll
need to pull a variety of keys. The Advanced Keying Chapter explains how to
tackle difficult keys.

Release Notes For information on system requirements, new features, improvements, fixed
bugs and known bugs & workarounds, see “Appendix A” on page 49.

Example Images Example blue and green screen images for use with Keylight can be
downloaded from our web site www.thefoundry.co.uk.

About The Foundry The Foundry is a leading developer of visual effects and image processing
technologies for film and video post production. Its products include Nuke,
Mari, Furnace, FurnaceCore, Keylight, and RollingShutter and run on a
variety of compositing platforms including Adobe After Effects, Discreet
Flame from Autodesk, Avid DS and Apple’s Final Cut Pro. For the full list of
products and supported platforms see http://www.thefoundry.co.uk.

Nuke is an Academy Award® winning compositor. It has been used to
create extraordinary images on scores of feature films including Avatar,
District 9, The Dark Knight, Iron Man, Quantum of Solace, The Curious Case
of Benjamin Button, Transformers, and Pirates of the Caribbean: At World’s
End.

Mari is a creative texture-painting tool that can handle extreme projects. It
was developed at Weta Digital and has been used on films such as District
9, The Day the Earth Stood Still, The Lovely Bones, and Avatar.


INTRODUCTION 6
About The Foundry

Storm is a product developed in-house at The Foundry to assist RED Digital
Cinema camera production workflows from on-set to delivery. It acts as a
hub, providing access to both metadata and original RAW image files
throughout the production process.

Furnace and FurnaceCore are collections of film tools. Many of the
algorithms utilise motion estimation technology to speed up common
compositing tasks. Plug-ins include wire removal, rig removal, steadiness,
deflicker, degrain and regrain, retiming, and texture tools.

Ocula is a collection of tools that solve common problems with stereoscopic
imagery, improve productivity in post production, and ultimately help to
deliver a more rewarding 3D-stereo viewing experience.

RollingShutter is a plug-in that tackles image-distortion problems often
experienced by users of CMOS cameras. The plug-in will often vastly
improve the look of distorted footage, by either minimising or eradicating
image distortions. Unlike solutions tied to camera stabilisation, that stretch
the image as a whole, the RollingShutter plug-in compensates for local
skewing and distortion in the scene, by correcting each object individually.

Visit The Foundry’s web site at http://www.thefoundry.co.uk for further
details.


GETTING STARTED 7
Introduction

GETTING STARTED

Introduction Keylight was first developed by The Computer Film Company to help with
difficult keys in feature films. Over the years, Keylight has been refined in
production on hundreds of films.

Notation When we refer to blue screens throughout the text we mean, of course, blue
or green screens.

Quick Key Keylight is available from the Effect - Keying menu in After Effects.

Consider this shot from The Saint, pictures courtesy of Framestore and
Paramount British Pictures Ltd. Figure 1 is the blue screen foreground that
should be composited over the background shown in Figure 2.

Figure 1. Blue Screen.

Figure 2. Background.

If you want to have a go of this shot, you can! The images can be
downloaded from our web site and this quick key is also covered in the
Tutorial Chapter. See “Tutorial 1: Simple Key” on page 31.

Throughout this user guide we assume a good understanding of After
Effects. To perform this quick key, do the following:


GETTING STARTED 8
Quick Key

1. Create a new composition using SaintFG.tif and SaintBG.tif. Layer the clips with
the blue screen over the background as shown in Figure 3.

Figure 3. Screen Shot showing Saint blue screen.
2. Select the blue screen clip (SaintFG.tif) in the Time Layout window and apply
Keylight from the Keying sub-menu of the Effect menu. See Figure 4.

Figure 4. Apply Keylight from the Effect - Keying menu.
3. The Keylight parameters are shown in Figure 5.


GETTING STARTED 9
Quick Key

Figure 5. Keylight Parameters.
4. Select the Screen Colour eye dropper and click on the blue screen in the
composition window. A good place to pick is the blue from the back windscreen
as this has no reflections. Picking this blue will key the back windscreen
perfectly leaving reflections in the side window.

Figure 6. Pick the blue from the back windscreen.
5. That’s it. In many cases this is all you will need to do to perform a key, since
selecting the screen colour creates a matte and despills the foreground. The
final composite is shown in Figure 7.

Figure 7. Final composite.

There are a couple of extra steps that can be taken to fine tune this key and
these are discussed in “Tutorial 2: Fine Tuning a Key” on page 34.

Picking the screen colour may be enough for a lot of keys, but there are
many more tools within Keylight that can be used to tackle more
complicated shots. These are described in later chapters.


BASIC KEYING 10
Basic Workflow

BASIC KEYING

The following section describes the parameters you need to do basic keying.
This will give you enough to tackle most simple keys. A discussion of
advanced parameters to fine tune and tackle complex keys can be found in
the next chapter.

Basic Workflow The first step is always to pick the Screen Colour. Then view the composite
and the screen matte.

If there is blue spill on the composite pick skin tones for the Despill Bias
from the foreground actor.

If the background is showing through the foreground or the foreground is
showing on the background, you need to improve your matte using the Clip
Black and Clip White parameters. In the next chapter we’ll look at ways of
doing this with inside and outside masks. See “Inside Mask Tip” on page 26.

Screen Colour The Screen Colour is probably the most important parameter and you should
always pick the screen colour before doing anything else. It should be set to
the colour of the green or blue curtain behind the foreground object. View
the Source image in the Composite window, select the eye dropper and pick
the screen colour. Setting the Screen Colour will create a matte - the Screen
Matte - and despill the foreground. In some cases this is enough to get a
decent key. For more information on Screen Colour see page 13.

Figure 8 shows a well lit blue screen behind an actor. You should note that
repeatedly picking the Screen Colour will override any previous selections. It
will not add to previous selections and key more of the image with each
click.

Figure 8. Blue Screen.
Note You should always pick screen colours from the Source image and not the Final
Result.


BASIC KEYING 11
View

Tip It’s worth picking several different blues and for each one viewing the matte and
status to judge the key.

View After picking the Screen Colour it’s useful to be able to check the quality of
the key by viewing the composite and the screen matte. You can do this
using the View Menu, shown here in Figure 9.

Figure 9. View Menu.

The options you’ll use the most are:
• Screen Matte - this renders the matte created by picking the screen
colour.
• Status - this renders an exaggeratted view of the mattes so that minor
problems are shown clearly.
• Final Result - this renders the foreground composited over the
background using all mattes, spill and colour corrections.

Status The Status is one of the options in the View menu and shows an
exaggerated view of the key so that you can make a more informed decision
when refining the composite. Figure 11 shows the Status display after the
screen colour has been picked from the image shown in Figure 10.

Figure 10. Green Screen. Figure 11. Status.


BASIC KEYING 12
Despill Bias

Three colours are displayed. Black pixels show areas that will be pure
background in the final composite. White pixels show areas that will be pure
foreground. Mid-grey pixels will be a blend of foreground and background
pixels in the final composite. You need grey pixels around the edge of the
foreground to get a good key at the foreground edge. However, if there are
grey pixels where there should be pure background, you should try to
remove these with the Screen Strength, Clip Black or Outside Mask. If you
have grey pixels where there should be pure foreground this tells you that
parts of the background will show through here and you will need to firm up
the foreground with Clip White or an Inside Mask.

Pixels that are a blend between the foreground and background are shown
in just one shade of grey. This is done to highlight potential problems with
the key. These grey pixels may represent a foreground/background blend of
50/50 or 99/1. No distinction is made as to this ratio.

You may occasionally see other colours in the Status View and these are
covered on page 20 in the Advanced Keying Chapter.

Despill Bias Although the foreground is despilled automatically, you may find the need
to pull out a little more of the screen colour after picking from the image.
You can do this with the Bias controls.

Figure 12. Exaggeratted blue spill. Figure 13. Despill Bias used to remove
the blue spill.

By default the Bias controls are locked together, which in the vast majority
of cases, is the best way to use them. See “Despilling” on page 15 in the
Advanced keying section for a look at a case where unlinking the bias
controls is a good tactic.

Thus, using either bias control colour dropper, pick the predominant
foreground colour. In the majority of cases it’s best to pick skin tones from
the foreground actor, as viewers tend to be most tuned to colour shifts in
these areas.


ADVANCED KEYING 13
Screen Colour

ADVANCED KEYING

The following section describes the parameters you need to fine tune keys
and get the most out of Keylight. Basic parameters covered in the previous
chapter may also be covered here in more detail.

Screen Colour The screen colour represents the colour of the pure blue (or green) screen.
The first thing you should do when pulling a key is pick the Screen Colour.
This single colour has a primary component, blue or green, and that has a
saturation. Once the screen colour has been picked, Keylight analyses all
the pixels in the image and compares the saturation of the primary
component in each of these pixels with the corresponding saturation of the
screen colour, setting the alpha and modifying the colour accordingly.
Tip Picking different shades of blue or green from the background can give quite
different results. It’s worth experimenting with different screen colours if your
initial pick didn’t give a good key.

Workflow Tip
It can also be useful to view the Status and Source side by side as shown in
Figure 14 so that you can repeatedly pick from one while viewing the result
in the other window.

Figure 14. Two Views.

Background Pixel

If the saturation of the pixel in the image is as strong, or greater than the
screen colour, then it’ll be a pixel from the blue screen background, and that
pixel will be set to completely transparent and black. See Figure 15.


ADVANCED KEYING 14
Screen Colour

Figure 15. Blue screen pixel set alpha to zero.

Edge Pixel
If the saturation of the pixel is less than the screen colour, then it’ll be the
edge of the foreground object, and we subtract some of the screen colour
from the pixel (de spilling) and set the image to semi-opaque. See Figure 16.

Figure 16. Edge pixel gives partial alpha.

Foreground Pixel
If the primary component in the pixel is not the same as the primary
component of the screen colour we have a foreground pixel, and the alpha is
set to completely opaque. The pixel colour is not modified. See Figure 17.

Figure 17. Foreground pixel gives full alpha.
Note You should note that the Screen Colour is a single colour. You are not picking lots
of colours that are keyed out.


ADVANCED KEYING 15
Despilling

Despilling Although picking the screen colour will remove blue spill, it may not be
enough. To despill more use the Despill Bias control. By default this is linked
to the Alpha Bias. In the rare case that the screen has been so badly shot
that it’s not really blue or green anymore, the alpha bias can be used to get
a good key.

Despill Bias Consider Figure 18 from the film "Merlin". Pulling a default key from this will
give the extreme blue spill around the edges of her hair as shown in
Figure 19.

Figure 18. Original blue screen. Figure 19. Default key.

To reduce this select the Despill Bias colour and pick skin tones from the
foreground image. This result is shown in Figure 20. The alpha channel is
shown in Figure 21.

Figure 20. Despill Bias. Figure 21. Alpha.

Alpha Bias You should not normally need to adjust the alpha bias seperately to the
Despill Bias, but on those rare occasions when your green screen is more
red than green it can be used to put things right in what would otherwise be
an un-keyable shot. Consider the image shown in Figure 22.


ADVANCED KEYING 16
Despilling

Figure 22. Is this the worst green screen you’ve ever seen?

This shot, from the film Executive Decision, is actually a green screen
although it doesn’t look it. The colour of the screen in the background is
around 28% red, 25% green and 8% blue. This is in fact red, but only just.
Note that the pilot in the cockpit is predominantly brown, at around 42%
red, 25% green, 15% blue. So a default key from that screen colour would
make the foreground transparent (Figure 23) as it is a more saturated red
than the red of the screen colour.

Figure 23. Default key showing the transparency of the foreground.

In this situation, the Alpha Bias can help. View the Source, unlink the Bias
controls, then select the Alpha Bias and pick colours from his mask. Now
pick the same colours for the Despill Bias. This gives the result shown in
Figure 24.

Figure 24. Alpha Bias and Despill Bias.


ADVANCED KEYING 17
Screen Gain

Screen Gain The screen gain controls how much of the screen colour is removed to make
the screen matte. Increasing this value will key more. For the most part, a
better way of improving the matte is using the Clip Black and Clip White
controls.

Figure 25 shows the Status after picking the screen colour. You can clearly
see that parts of the background are grey where they should be black. When
composited you may see faint pixels from the foreground where you should
be seeing pure background. Increasing the screen gain will fix this, as shown
in Figure 26, but increasing it too much will destroy your good work. Like
many keying parameters it’s a balance - not too much, not too little.

Figure 25. Status after picking Figure 26. Status showing the
the Screen Colour. increase in Screen Gain.

Increasing the screen gain too much will lead to the background showing
through the foreground and edge detail will be destroyed. Figure 28 shows
this quite well. Note the steering wheel is black when it should be white. If
you look at the composite you will see the background showing through
here. Also, some of the fine hair detail on the actor, visible in Figure 27, has
been eroded in Figure 28.

Figure 27. Screen Gain = 100 giving a Figure 28. Screen Gain = 150 giving
good screen matte. background show through and over
eroded edges.


ADVANCED KEYING 18
Screen Balance

Screen Balance Saturation is measured by comparing the intensity of the primary
component against a weighted average of the two other components. This
is where the Screen Balance control comes in. A balance of 100% means
that the saturation will be measured against the smallest of the other two
components in the screen colour.

A balance of 0% means that the saturation will be measured against the
larger of the other two components. A balance of 50% will measure the
saturation from the average of the other two components.

The appropriate balance point for each image sequence you key will be
different depending on the colours in that image. Generally speaking, blue
screens tend to work best with a balance of around 95% and green screens
with a balance of around 50%. If the key is not working too well with these
settings, try setting the balance to about 5%, 50% and 95% and see what
works best.

Clip Levels The clip levels are adjusted using two parameters - Clip Black and Clip
White. Any alpha value at or below Clip Black will be set to zero and any
alpha value at or above Clip White will be set to 100. Figure 29 shows the
original alpha of an image and Figure 30 shows the result of clipping it.

Figure 29. Clip Black = 0. Figure 30. Clip Black = 50.

Notice how the grey areas in the black background have been reduced and
that the grey edges have hardened up considerably. When compositing, the
Clip Black control can be used to improve the background image if parts of
the foreground are showing through. The Clip White control on the other
hand can be used to firm up the centre of the matte, making it less
transparent to the background.
Note You need to be really careful if you chose to use Clip Black and Clip White that you
don't destroy the edges on your foreground. It is possible to use Clip Rollback to
compensate for this.


ADVANCED KEYING 19
View

View After picking the Screen Colour it’s useful to be able to view the key in
different ways. You can do this using the View Menu, shown here in
Figure 31.

Figure 31. View Menu.

Here’s the complete list of options and what they do.
• Source - displays the blue or green screen.
• Source Alpha - displays the alpha channel embedded in the blue or green
screen.
• Corrected Source - displays the uncomposited source image with any
colour corrections applied.
• Colour Correction Edges - displays the foreground edges as a matte that
will be colour corrected using the controls in the Edge Colour Correction
folder.
• Screen Matte - displays the matte created as a result of picking the
screen colour.
• Inside Mask - displays the mask that firms up the foreground.
• Outside Mask - displays the mask that cleans up the background.
• Combined Matte - displays all the screen matte, inside and outside
masks and any source alpha added together. The combined matte is used
to composite the foreground over the background layer.
• Status - displays an exaggerated view of the key so you can make a more
informed decision on how to improve the result. See “Status View” on
page 20.
• Intermediate Result - is used for multipass keying. The alpha is set as
per normal, but the RGB values are not modified from the original source
image. See “Inside Mask Tip” on page 26.
• Final Result - renders the foreground composited over the image on the
background track. This image is premultiplied. In other words, the RGB
values of pixels have been multiplied by their corresponding alpha
channel values.


ADVANCED KEYING 20
Status View

Status View The Status View is one of the options in the View menu and shows an
exaggerated view of the key so that you can make a more informed decision
when fine tuning the composite. Figure 33 shows the Status after the
screen colour has been picked from the image shown in Figure 32.

Figure 32. Green Screen. Figure 33. Status.

Three colours are displayed. Black pixels represent pure background in the
final composite. White pixels are pure foreground and grey pixels are a
blend of the foreground and background pixels. The grey is just one colour
to highlight any areas that are not pure foreground or background. Grey
pixels do not mean the key is poor - the final composite may be fine.

You may occasionally see other colours in the Status View. Figure 34 shows
black, white, grey and green pixels. The green pixels are a warning. They
show you the parts of the Screen Matte that have changed through
processing the matte (clipped, softened or eroded).

Figure 34. Status showing processing Figure 35. Result showing Screen
of the Screen Matte. Matte Replace Colour.

These areas have had the correct amount of spill removed, but the alpha
has subsequently changed and the composite may no longer look right. This
can be corrected using Replace Colour to put back colour in these areas.
Figure 35 is an extreme example to illustrate the point. The Replace Colour
has been set to pure red and you can see that this mirrors the green pixels
in the Status View.


ADVANCED KEYING 21
Screen Matte

Similarly you may see blue pixels in the Status. These represent processed
pixels in the Inside Mask that affect the despill of the foreground. The
Replace Colour in the Inside Mask folder will be used to modify these pixels.
Another extreme example is shown in Figure 37. The Replace Colour is set
to pure yellow and the Replace Method is Hard Colour.

Figure 36. Status showing how Figure 37. Final Result showing the
the Inside Mask will affect the Inside Mask Replace Colour.
foreground.

You may also see dark red pixels which indicate areas where an outside
mask has been used to reduce the transparency of the image.

Screen Matte The Screen Matte (Figure 39) is the result of pulling the blue or the green
from the image (Figure 38) and making those regions transparent.

Figure 38. Green screen. Figure 39. Screen Matte.

Once you have done this you will want to firm up the foreground (make it
more white) and clean up the background (make it more black). This can be
done by processing the Screen Matte.


ADVANCED KEYING 22
Clip Rollback

Clip Rollback Pulling a Screen Matte (Figure 40) will typically produce lots of transparency
(grey) in the matte at the edges. This is good since this is what you need to
key hair well. You may also get transparency in the foreground as shown in
Figure 41.

Figure 40. Screen matte Figure 41. Close up screen matte
highlighting the close up view showing unwanted (grey) transparency
as shown in Figure 41. in the (white) foreground.

This is bad as your subject will appear slightly see-through, and this should
be corrected. You can do this with an inside mask shape, or you can use the
Clip White parameter to turn these grey pixels white. This cleans up the
foreground (Figure 42) but it will also destroy the edge detail you want to
keep. This is where Clip Rollback comes in. This is used to put back the
edges to restore the detail that was lost. A rather exaggerated clip rollback
is shown in Figure 43 to illustrate the point.

Figure 42. Clip White has been Figure 43. Clip Rollback has been
used to remove the unwanted used to reduce the unwanted
grey pixels in the white matte. erosion of the edge.


ADVANCED KEYING 23
Grow & Shrink

Grow & Shrink This control should not normally be used as eroding the edges can produce
a very poor key. However, this parameter allows you to grow (if greater
than zero) or shrink (if less than zero) the alpha in the Screen Matte. These
controls are sub-pixel accurate.

Figure 44. Screen Matte. Figure 45. Eroded Matte.

There is, however, one circumstance where heavy eroding is useful and that
is for producing a matte used as an inside mask. See “Inside Mask Tip” on
page 26.

Despot This controls how much to simplify the matte. It coagulates similar regions
so that, for example, black specks in the white matte can be absorbed by
the surrounding white areas. Increasing the Screen Despot Black will remove
isolated spots of black in the white matte. Increasing Screen Despot White
will remove isolated spots of white in the background up to that size.

Figure 46. Eroded matte. Figure 47. Despot.

Colour Remember that Keylight does two things - it removes the screen colour to
Replacement despill the image and generates an alpha (Screen Matte) to composite the
foreground over the background layer.


ADVANCED KEYING 24
Inside & Outside Masks

If you then process the Screen Matte, for example, by eroding the matte or
changing the clip levels, Keylight will be removing the wrong amount of
screen colour from the pixels whose transparency have now changed. The
Replace Method instructs Keylight how to deal with such pixels. The Status
will display which pixels use a replace method. Those pixels who use a
replace method because the Screen Matte processing tools modified the
transparency will be green, whilst those pixels whose transparency was
modified by the inside mask will be blue. See the Status View on page 20.

There are four options to the replace method, these are:
1. None - the despilled image is left untouched if the alpha is modified.
2. Source - the image will have a corresponding amount of the original pixel
(screen colour and all) reintroduced/removed if the alpha is changed.
3. Hard Colour - the despilled image has a corresponding amount of the replace
colour added for any increase in alpha.
4. Soft Colour - the despilled image has a corresponding amount of the replace
colour added for any increase in alpha, however, it attempts to modulate the
luminance of the resulting pixel so that it matches the original pixel. This will
give a more subtle result than the Hard Colour option.

Inside & Outside If you can’t adequately improve the Screen Matte using the Clip Levels, you
Masks can input a mask that defines the foreground or background. The Inside
Mask makes the foreground less transparent and the Outside Mask is used
to clean up the background that might have bits of the foreground showing
through. The outside mask is often used to clean up screens that are not a
constant colour or have lighting rigs in shot (Figure 48) by forcing the alpha
transparent.

Figure 48. Green Screen with lighting rig visible.


ADVANCED KEYING 25
Inside & Outside Masks

The inside mask can be used to keep elements in the foreground that you
don't want to lose (an actor’s blue eyes in front of a blue screen). These
masks should normally be softened to blend into the Screen Matte.

Figure 49 shows an After Effects Mask drawn around the lighting rig on the
left side of the screen. When this is used as the Outside Mask and the View
control set to render the Outside Mask, you will see the image displayed in
Figure 50.

Figure 49. Mask drawn round the Figure 50. Mask used as an Outside
lighting rig. Mask and Viewed.

The outside mask forces that part of the image to be in the background thus
keying out the rig. The Screen Matte shown in Figure 51 shows the matte
pulled when the green screen is picked. When the Outside Mask is
subtracted from the Screen Matte we get the Combined Matte, shown in
Figure 52.

Figure 51. Screen Matte. Figure 52. Combined Matte.

Here you can see the change in the matte that will result in the lighting rig
being keyed out in the final composite. If more than one mask is required to
remove garbage, then use the masks to create an embedded alpha channel
in the image and set the Source Alpha to Normal. See “Source Alpha” on
page 26.


ADVANCED KEYING 26
Source Alpha

Creating an Inside/ To create an inside or an outside mask, do the following:
Outside Mask 1. Draw a mask on the image using Pen Tool. By default, your mask will be
named Mask 1.
2. Next to the timeline, expand the fg1.rgb layer and Masks, and in the
Mask dropdown, select None instead of the default Add.
3. If you’re creating an inside mask, in the Keylight controls, click Inside
Mask > Inside Mask and switch from None to Mask 1.
Similarly, if you are creating an outside mask, in the Keylight controls,
select Outside Mask > Outside Mask and switch from None to Mask 1.

Source Alpha This parameter determines how to deal with any embedded alpha in the
original image.
• Ignore - this will not use any embedded alpha in the key.
• Add to Inside Mask - the embedded alpha is added to the inside mask.
• Normal - the embedded alpha is used to key the layer as normal. It is
added to Keylight’s screen matte and can be useful if requiring
complicated multi-shaped masks to rotoscope out garbage.

Inside Mask Tip
An alternative and very powerful use of the Source Alpha option is to
provide a solid inside mask pass-through in multipass keying. In other
words you can use Keylight to pull a really harsh eroded matte that can be
used to stop print through in a second key that concentrates on the edges.
Print through is where the background shows through the foreground in a
composite. Here’s how you do it.
1. Apply Keylight to your footage and pick the screen colour.
2. Using Clip White, Clip Black and Screen Shrink/Grow while viewing the Screen
Matte, get a very harsh eroded matte as shown in Figure 53.

Figure 53. Highly eroded matte.
3. Switch the View to Intermediate Result to pass through the RGB channels
unaffected with the screen matte in the alpha channel. It looks a bit odd but
don’t worry.


ADVANCED KEYING 27
Colour Correction

4. Now apply a second Keylight and pick the screen colour as normal. Looking at
the Status display as shown in Figure 54 you should be able to see the
background showing through the foreground white areas.

Figure 54. Status for default key showing foreground transparency.
5. To fix this we’ll use the harsh matte we pulled in the first key. In the Inside Mask
group, switch Source Alpha from Ignore to Add To Inside Mask. The result is
shown in Figure 55.

Figure 55. Status showing improved foreground as a result of
adding the harsh matte from the first key.
6. With a good foreground, you can now concentrate on pulling a subtle key for the
edges without worrying about the background showing through the foreground.
You may also need to use a very rough garbage mask to improve the background
particularly for unevenly lit screens.

Colour Correction The Colour Correction parameters allow you to modify the foreground
colours in your composite. In particular, reflected blues and greens from the
screen can be suppressed.

Saturation - this control will increase or decrease the colour saturation of
the image, making colours more or less intense.

Contrast - the contrast is the ratio of brightest tones to the darkest.
Increase this value for a contrasty image and decrease it to wash it out.

Brightness - the brightness equates to the overall luminance of the image.
Increase this value to make the image lighter and decrease this value to
make it darker.


ADVANCED KEYING 28
Edge Colour Correction

Colour Suppression

Suppress - this controls colour suppression in the image. You can choose
to remove a specific primary, either Red, Green, Blue or their complements,
Cyan, Magenta or Yellow. For green screens you may find it helpful to
suppress green.

Suppression Balance - determines what to reduce the suppressed
component to. If set to 0%, it will be the smallest of the other two
components, if set to 100% it will be the largest of the other two
components. Otherwise, it will be to a balanced average.

Suppression Amount - determines how strongly you want to reduce the
indicated component.

Colour Balancing

These controls are used to alter the colour balance of the image. Choose a
hue and saturation (either via the sliders or the colour balance wheel) to
shift the entire colour balance of the image.

Edge Colour The Edge Correction parameters allow you to colour correct edges to seat
Correction the composite into the background. To see the areas considered an edge
that you will be affecting, select the Colour Correction Edges from the View
menu.

Enable Edge Colour Correction - use this option to separately colour correct
edges of the image independently from the overall colour correction.

Edge Hardness - this determines how strongly to blend between the edge
correction and the main correction.

Edge Softness - this will soften the region considered to be the edge by this
amount (in pixels).

Edge Grow - this will grow the region considered to be the edge by this
amount (in pixels).

Saturation - these controls determine how much to scale the saturation of
the image.

Contrast - this control increases/decreases the contrast on the region
considered to be the edge.


ADVANCED KEYING 29
Source Crops

Brightness - this control brightens the region considered to be the edge.

Edge Colour Suppression
Controls the colour suppression in the image.

Suppress - Choose to completely remove a specific primary, either Red,
Yellow, Green, Blue or their components, Cyan, Magenta or Yellow.

Suppression Balance - determines what to reduce the suppressed
component to. If set to 0%, it will be the smallest of the other two
components, if set to 100% it will be the largest of the other two
components. Otherwise, it will be to a balanced average.

Suppression Amount - determines how strongly you want to reduce the
indicated component.

Colour Balancing
These controls are used to alter the colour balance of the image edges.
Choose a hue and saturation (either via the sliders or the colour balance
wheel) to shift the entire colour balance of the image.

Source Crops The Source Crops enable you to quickly cut out lighting rigs or other
unwanted elements using vertical and horizontal lines.

Keylight requires access to source pixels that lie off the edge of the source
image. The cropping controls provide access to all the controls required for
specifying how pixels are treated at these edges and where they appear.
The built-in crop controls are also useful for removing unwanted black
pixels at the edge of video footage.

X Y Method - determines the behaviour of the image at the left and right
crop boundaries. Four edge methods are supplied:
• Colour - fills the area between the crop line and the edge with the Crop
Colour.
• Reflect - reflects pixels about the current crop line. In other words, it
copies pixels from the other side of the current crop line into the area
between the current crop line and the screen edge.
• Repeat - copies pixels on the crop boundary to the screen edge.
• Wrap - copies pixels from the area between the opposite crop line and
its screen edge to the area between the current crop line and its screen
edge. 


ADVANCED KEYING 30
Source Crops

Note Horizontal and vertical crop boundaries can have different edge methods, Cropping
is often used to remove unwanted pixels at the edge of an image. If a video clip is
digitized badly you may get black edges left and right. These can be easily removed
by moving the vertical crops and setting the edge method to Reflect.
Edge Colour - sets the fill colour used when the edge method is set to
Colour.

Edge Colour Alpha - sets the fill colour transparency.

Left, Right, Top, Bottom - use these controls to set the crop positions. Lines
will be overlaid in the display enabling you to set the various positions by
eye.
Note The position of the crop lines can be changed by clicking and dragging them directly
on the screen.


TUTORIAL 31
Introduction

TUTORIAL

Introduction We have included several tutorials with example images that you can use to
practice Keylight.
• Tutorial 1: Simple Key
• Tutorial 2: Fine Tuning a Key
• Tutorial 3: Extreme Blue Spill
• Tutorial 4: A Red Green Screen
• Tutorial 5: Inside & Outside Masks

Example Images The tutorial images referred to in this chapter can be downloaded from our
web site www.thefoundry.co.uk.

Tutorial 1: Simple Using the blue screen clip from The Saint, you will composite the actor over
Key the background. You will learn how to:
• Apply Keylight to a layer.
• Pick the Screen Colour.
• View the Final Result.

The clips you will need for this task are called SaintFG.tif and SaintBG.tif,
pictures courtesy of Framestore and Paramount British Pictures Ltd. for the
film The Saint. You should import them into After Effects and create a new
composition containing the blue screen of Elizabeth Shue layered over the
road.

Figure 56. Blue Screen - saint.tif

Figure 56 is the blue screen foreground that should be composited over the
background shown in Figure 57.


TUTORIAL 32
Tutorial 1: Simple Key

Figure 57. Background - road.tif
1. Create a new composition using SaintFG.tif and SaintBG.tif, layer the
clips with the blue screen over the background as shown in Figure 58.

Figure 58. Screen Shot showing Saint blue screen.
2. Select the blue screen clip (SaintFG.tif) in the Schematic window and
apply Keylight from the Effect - Keying menu. See Figure 59.

Figure 59. Apply Keylight from the Effect - Keying menu.
3. The Keylight parameters are shown in Figure 60.


TUTORIAL 33
Tutorial 1: Simple Key

Figure 60. Keylight Parameters.
4. Select the Screen Colour eye dropper and click on the blue screen in the
composition window. A good place to pick is the blue from the back
windscreen as this has no reflections. See Figure 61.

Figure 61. Pick the blue from the back windscreen.
5. That’s it. In many cases this is all you will need to do to perform a key,
since selecting the screen colour creates a matte and despills the
foreground. The final composite is shown in Figure 62.

Figure 62. Final composite.

There are a couple of extra steps that can be taken to fine tune this key and
these are discussed in the next tutorial on page 34.


TUTORIAL 34
Tutorial 2: Fine Tuning a Key

Tutorial 2: Fine Using the images from the film The Saint, you will learn how to fine tune the
Tuning a Key key pulled in Tutorial 1. You will learn how to:
• Use Status to judge the quality of the key.
• Use the Screen Gain to improve the background.
• Use the Despill Bias to remove more blue spill.

1. Create a new composition using SaintFG.tif and SaintBG.tif. Apply Key-
light to the blue screen layer. Select the Screen Colour eye dropper and
click on the blue screen in the composition window.
Note These steps were covered in greater detail in the previous chapter.
2. Before we do anything else we need to look at the quality of the key so
far. On first inspection, the composite looks pretty good, but it’s hard to
judge. To see any potential problems more clearly, switch to the Status
view as shown in Figure 63.

Figure 63. Status showing grey pixels in the background.
Here we can see that the windscreens are a mixture of black and grey
pixels. The black pixels tell us that pure background will be seen here in
the final composite. The grey pixels tell us that there will be a mix of
foreground and background pixels. What we want is a clean background
showing through the windows, but with some reflections in the side win-
dow preserved. In other words we need mostly black pixels with a few
grey ones.
3. Figure 64 shows the Status view that we’re aiming for. The background
has been cleaned up and we still have some reflections in the side
window. To get this you should increase the Screen Gain from 100 to
112.

Figure 64. Improved background with Screen Gain.


TUTORIAL 35
Tutorial 2: Fine Tuning a Key

4. Finally, if you look closely at the composite you will see a tiny amount of
blue spill on the woman’s hand and in her hair. This was from reflected
light from the blue screen. Pick skin tones for the Despill Bias to remove
it.

Figure 65. Final Composite.


TUTORIAL 36
Tutorial 3: Extreme Blue Spill

Tutorial 3: Extreme This is a really interesting clip from the film Merlin. The results with Keylight
Blue Spill are certainly not perfect, indeed it is unlikely that you will ever end up with
a truly realistic looking shot. However, there are some interesting things to
observe. You will learn how to:
• Reduce the blue spill using Screen Balance and Despill Bias.
• Improve the foreground opacity using Alpha Bias.
1. Load the MerlinBlueFG.tif (Figure 66) and MerlinBlueBG.tif clips and apply
Keylight.

Figure 66. A tricky blue screen.
2. Pick the Screen Colour using the eye dropper.

Figure 67. Serious blue spill.
Pick a pure blue pixel away from the hair.
3. Increase the Screen Gain from 100 to 105. This will clean up a little of
the background.


TUTORIAL 37

4. Alter the Screen Balance from 95 to 0 as shown in Figure 68. This step is
a bit subjective, but improves the blue spill.

Figure 68. Adjust the Screen Balance
5. Now let’s try and get rid of that blue spill. switch off Lock Biases
Together and pick skin tones for the Despill Bias. When you do this the
image and the screen colour will have the blue component scaled up
before the key is pulled so that more blue is removed.

Figure 69. Despill Bias.
6. You will notice that Miranda Richardson’s face now has a number of blue
highlights, due to the transparency, that we should fix. The best way to
do this is by drawing a spline round the face as shown in Figure 70 and
using it as an Inside Mask.


TUTORIAL 38

Figure 70. Inside Mask spline.
7. Refer to your After Effects guide for more information on masks,
however, select the pen tool, draw a bezier spline around the face on
frame 1 (Mask 1), switch this mask off () then in keylight set the Inside
Mask to Mask 1 and Source to None. You should also soften the mask
slightly by setting the Inside Mask Softness to 5.

Figure 71. Switch the Mask off.
8. To remove the blue highlights on the cheeks (Figure 72) you need to set
the Replace Method to Soft Colour rather than Source.

Figure 72. Replace - Source. Figure 73. Replace - Soft Colour.


TUTORIAL 39

9. View Final Result as shown in Figure 74.

Figure 74. Final Key.


TUTORIAL 40
Tutorial 4: A Red Green Screen

Tutorial 4: A Red Using the images from the film Executive Decision, you will learn how to pull
Green Screen a key from a poor green screen using the Despill Bias control. You will learn
how to:
• Pick the Screen Colour.
• Use Despill Bias and Alpha Bias.
• Produce a final composite.

The images you will need for this tutorial are called ExecFG.
1. Load the pictures ExecFG.tif (Figure 75) and ExecBG.tif. Apply Keylight.

Figure 75. Poor Green Screen.
The foreground image is actually a green screen shot although it doesn’t
look it. If you analyse the pixels it’s slightly more red than green. To key
this we’ll have to fool Keylight.
2. Pick the Screen Colour. You should go for the slightly darker green patch
to the left of the pilot. Although feel free to experiment picking different
parts of the green screen. The initial selection gives the result shown in
Figure 76.

Figure 76. Default key.
3. To fix this we need to tell Keylight to scale down the red component to
make the green the most dominant so that it keys correctly.


TUTORIAL 41

To do this pick colours from the mask for both the Despill Bias and Alpha
Bias. The result is shown in Figure 77.

Figure 77. Despill Bias and Alpha Bias.
4. If you look closely, the background and foreground needs cleaning up.
Figure 78 shows the Status View. We will use the Screen Matte tools to
make the cockpit windows black and the pilot white.

Figure 78. Status View.
5. Increase Clip Black to 20 to remove some of the foreground showing
through the background. Decrease Clip White to 70 to improve the
opacity of the foreground. Increase Screen Softness to 1, Screen Despot
Black to 2 and Screen Despot White to 2.

Figure 79. Composite.
6. Use the Screen Matte Replace Method to pull some of the original image
through the composite.


TUTORIAL 42

This improves the apparent graininess in the foreground. Figure 80
shows the differences.

Figure 80. Close up view. The left image has Replace Method set to Source. The
right image has Replace Method set to None.


TUTORIAL 43
Tutorial 5: Inside & Outside Masks

Tutorial 5: Inside & Using the 16 bit blue screen test card image you will learn how to:
Outside Masks • Use Inside and Outside Masks.
• Use the Replace Method to put back keyed out colours.
• Process the Screen Matte.

The clips you will need for this task are called TestCard.cin and
ColourGrid.cin
1. Start After Effects. Create a new 16 bit workspace. Import the pictures
TestCard.cin (Figure 81) and ColourGrid.cin and put them into the com-
position layering the blue screen over the colour grid.

Figure 81. Test Card.
2. Apply Keylight to the blue screen layer and pick the blue from the image.
Keylight will create a matte and despill the foreground as shown in
Figure 82.

Figure 82. Basic Key.


TUTORIAL 44

3. To remove the garbage around the subject we will use an outside mask.
Using After Effects’s masks, draw a spline around the person and test
cards. This will be called Mask 1 by default. This is shown as the yellow
line in Figure 83.

Figure 83. Outside Mask.
4. In the Time Layout window twirl open the TestCard layer and Masks sub-
layer and set the compositing mode from Add to None.
5. In Keylight, check that the Outside Mask to Mask 1 and switch Invert on
or you’ll be removing the person rather than the unwanted pixels at the
screen edges.

Figure 84. Outside Mask.


TUTORIAL 45

6. You will have noticed in Figure 84 the "dirt" around the subject’s head.

Figure 85. Status View.
Clearly we have to improve the key. You can also see the faults in the
matte if you view the Status as shown in Figure 85.
7. Increase the Screen Gain to 110. This cleans up some of the background
as shown in Figure 86.

Figure 86. Increase Screen Gain.
8. Sections 7 to 10 will cover the changes to the Screen Matte that will
improve the key. In the Screen Matte parameter area, decrease the Clip
White from 100 to 70. This will improve the foreground as shown in
Figure 87.


TUTORIAL 46

However, you will notice in the composite that the edges have become a
little hard. We can fix this using the Clip Rollback and Screen Softness.

Figure 87. Clip White.
9. Increase the Clip Rollback to 3 and the Screen Softness to 1. It’s also
worth trying to improve the key around the spiky flowers with a sub-
pixel erode of the edge. Change Screen Grow/Shrink to -0.5.

Figure 88. Rollback and Softness.
10.To remove the foreground spots increase Screen Despot Black to 1. The
result is shown in Figure 89.


TUTORIAL 47

Figure 89. Screen Despot Black.
11.The composite is shown in Figure 90. You will see that the colours of the
colour swatches have been altered by the Keylight algorithm. This can be
fixed with an Inside Mask.

Figure 90. Composite.
12.Draw a rough mask (Mask 2) around just the colour swatches. Set the
Inside Mask to Mask 2 and the Replace Method to Source to pull back
the original colours.


TUTORIAL 48

Figure 91. Inside Mask and Replace Method Source.
13.That’s it.


APPENDIX A 49
Release Notes

APPENDIX A

Release Notes This appendix describes the requirements, new features, improvements over
previous versions, fixed bugs, and known bugs and workarounds in Keylight.

Keylight 1.2v13 This is a maintenance release of Keylight to support After Effects CS5.5.

Requirements
Adobe After Effects CS5.5 Professional on Mac OS X 64-bit or Windows
Vista/7 64-bit.

Release Date
January 2011

New Features
There are no new features.

Improvements
There are no improvements to existing features.

Fixed Bugs
There are no fixed bugs.

Known Bugs and Workarounds
There are no known bugs.

Keylight 1.2v12 This is a maintenance release of Keylight to support After Effects CS5 and
is bundled with After Effects CS5.

Requirements
Adobe After Effects CS5 Professional on Mac OS X 64-bit or Windows
Vista/7 64-bit.

Release Date
January 2010


APPENDIX A 50
Release Notes

New Features

Improvements

Fixed Bugs
BUG ID 194 - There was a multiprocessing rendering bug shown up as half
screen renders. This has been fixed.


Keylight 1.2v11 Internal release only.

Keylight 1.2v10 This is a maintenance release of Keylight to support AE CS4 and is bundled
with AE CS4 Professional.

Requirements
Adobe After Effects CS4 Professional on Mac OS X or Windows XP.

Release Date
June 2008

New Features

Improvements

Fixed Bugs
• About Dialog - on Mac OS X only, launching the About dialog and then
clicking off the dialog forces the dialog into the background under the AE
application window. Subsequent interaction with After Effects would fail.
This bug has been fixed in this release.

• Multiprocessing - BUG ID 194 - There is a multiprocessing rendering bug
shown up as half screen renders. Only seen on Intel PCs with dual core.


APPENDIX A 51
Release Notes

As a workaround you could temporarily set the environment variable
FOUNDRY_MAX_PROCESSORS to 1.

Keylight 1.2v9 Internal release only.

Keylight 1.2v8 This is a maintenance release of Keylight to fix a bug. The version of
Keylight that ships with AE CS3 Professional is Keylight 1.2v5.

Requirements
Adobe After Effects CS3 Professional on Mac OS X or Windows XP.

Release Date
January 2008

New Features

Improvements

Fixed Bugs
• Edge Colour Correction - BUG ID 3176 - colour correction of the edges
failed to work. This has been fixed.

• About Dialog - on Mac OS X only, launching the About dialog from the
Keylight banner and then clicking off the dialog forces the dialog into the
background under the AE application window. Subsequent interaction
with After Effects would fail. To get round this, move the After Effects
applcation to one side to reveal the Keylight dialog underneath, then
click on the dialog to close it.

Keylight 1.2v6 This is a maintenance release of Keylight to support AE CS3 on Mac and
Win. The version of keylight that ships with AE CS3 Professional is Keylight
1.2v5. This release fixes a couple of bugs in that.


APPENDIX A 52
Release Notes

Requirements
Adobe After Effects CS3 Professional on Mac OS X or Windows XP/Vista.

Release Date
5 July 2007

New Features

Improvements

Fixed Bugs
• Adaptive Rendering - when scrubbing along the timeline with adaptive
rendering switched on, the screen would freeze. An interrupt call was
being treated as an error and a redraw wasn’t called. This has been fixed.
• About Dialog - clicking on the Keylight banner to show the About dialog,
caused the After Effects viewing window to render black. This has been
fixed by disabling the ability to launch the dialog from the banner. Click
on the standard Adobe "About" text at the top of the plug-in panel
instead.
• Snapshot - BUG ID 231 - snapshot button broken when using Keylight
with AE 7. This bug has been fixed in AE CS3.

• About Dialog - on Mac OS X only, launching the About dialog from the
Keylight banner and then clicking off the dialog forces the dialog into the
background under the AE application window. Subsequent interaction
with After Effects would fail. To get round this, move the After Effects
applcation to one side to reveal the Keylight dialog underneath, then
click on the dialog to close it.

Keylight 1.2v5 This is a maintenance release of Keylight to support After Effects CS3. This
version ships with AE CS3.

Requirements


APPENDIX A 53
Release Notes

New Features

Improvements

Fixed Bugs
• Internal version number incremented to enable licensing to work
correctly for the release version of CS3.


Known Bugs with After Effects and Workarounds
• Snapshot - BUG ID 231 - snapshot buttons broken when using Keylight
with After Effects 7.0. If you apply Keylight and snapshot the image,
change some parameters and recall that saved snapshot, it is displayed
only for a fraction of a second. As a workaround use the Shift-F5 and F5
keys instead.

Keylight 1.2v4 This is a maintenance release of Keylight to support After Effects CS3.

Requirements

New Features

Improvements

Fixed Bugs
1. This version of Keylight was compiled against an updated version of the
After Effects SDK (7 March 2007).



APPENDIX A 54
Release Notes


keys instead.


Release Date
Unreleased.

Requirements

New Features

Improvements

Fixed Bugs
• Loading old projects - BUG ID 923 - loading AE7 projects that used
Keylight 1.1 into AE8/CS3 with Keylight 1.2 would report a missing plug-
in. This bug has been fixed.




APPENDIX A 55
Release Notes

keys instead.

Keylight 1.2v2 This is a Windows only maintenance release of Keylight to fix a bug.

Requirements
Adobe After Effects CS3 Professional on Windows XP/Vista only.

New Features

Improvements

Fixed Bugs
• SSE2 - BUG ID 801 - the previous version of Keylight was compiled with
a sse2 flag preventing it from working on very old hardware running
Windows. This version has been recompiled with sse1 to fix this problem
affecting a minority of customers.


keys instead.


Requirements

New Features
• FLEXlm license support for After Effects Standard.


APPENDIX A 56
Release Notes

• Released as a universal binary for AE CS3 on Mac Intel and PPC.

Improvements
• The bias controls are now locked together by default.
• The Keylight algorithm has been tweaked for improved floating point
handling.
• An environment variable (FOUNDRY_MAX_PROCESSORS 1) has been
provided to switch off multi-processing as a temporary workaround for
Bug ID 194.
• Keylight is now versioned by name. This allows multiple versions of the
plug-in to coexist on a single host.
• 3GB Switch - the plug-ins have been compiled to take advantage of
extended memory available in this mode.

Fixed Bugs
• Inside Mask, Source Alpha set to Add To Inside Mask. When viewing the
Status with the source alpha added to the inside mask the combined
mattes were not drawn on screen even though the matte had been
added. This has been fixed so that the Status correctly shows these
combined mattes.
• Source Crops - BUG ID 224 - changing the left crop value from 0 when X
Method is Colour, produces a rendering error in the colour correction
edges. This has been fixed.
• Installer - BUG ID 223 - Keylight could only be installed to the default
directory. This has been fixed.
• Colour Correction Clipping - BUG ID 225 - colour correction of the
foreground or edges is incorrectly clipped between 0 and 1 for floating
point images. This has been fixed.


Keylight 1.1v1 This is a new release to support After Effects 7.0.

Requirements
Adobe After Effects 7.0 Professional on Mac OS X or PC.

Release Date


APPENDIX A 57
Release Notes

June 2005

New Features
• Support for keying floating point images (32bpc).

Improvements
• The Alpha and Despill Bias controls are now colour widgets rather than
sliders. This change extends the range of shots that can be keyed.
• The default edge method on the Source Crops has been changed to
Colour.

Fixed Bugs


Keylight 1.0v4 This is a maintenance release to fix a bug.

Requirements
Adobe After Effects 6.0 or 6.5 Professional on Mac OS X or PC.

Release Date
8 September 2003

New Features

Improvements
• Installer for Mac OS X changed to standard pkg format. Plug-ins remain
the same.

Fixed Bugs
• BUG 354. On PC only, on selecting Edit>Purge>All After Effects will
crash. This has been fixed in this release.

• BUG ID 99 - Keylight would sometimes render only half a frame on multi-
processor windows machines only on After Effects 6.5 only. This did not
affect After Effects 6.0 (or After Effects 7.0)


APPENDIX A 58
Release Notes

Keylight 1.0v3 This version is the full release and is supplied on the Adobe After Effects
6.0 Professional CD.

Requirements

New Features

Improvements

Fixed Bugs
• During a Keylight render, if a redraw of the After Effects user interface
occurs, possibly due to a screen saver or window stowing, this may
cause Keylight to crash. This bug has been fixed.
• BUG 346. If Keylight was copied and pasted between compositions, After
Effects will crash. This has been fixed.


Keylight 1.0v2 Requirements

New Features

Improvements
• A new parameter, "Normal", has been added to he Source Alpha menu to
allow embedded alpha to key the layer as normal. This allows multi-shape
masks to be used as garbage mattes.

Fixed Bugs


Keylight 1.0v1 Requirements


APPENDIX A 59
Release Notes

New Features
This section will describe new features in later versions.

Improvements
This section will describe improvements to existing features in later
versions.

Fixed Bugs
This section will describe fixed bugs in later versions.



APPENDIX B 60
Third Party Licenses

APPENDIX B

This appendix lists third party libraries used in Keylight, along with their licenses.

Library Description License
Boost Source code function / Boost Software License - Version 1.0 - August 17th, 2003
template library Permission is hereby granted, free of charge, to any person or organization obtaining
a copy of the software and accompanying documentation covered by this license (the
“Software”) to use, reproduce, display, distribute, execute, and transmit the Software,
and to prepare derivative works of the Software, and to permit third-parties to whom
the Software is furnished to do so, all subject to the following:
The copyright notices in the Software and this entire statement, including the above
license grant, this restriction and the following disclaimer, must be included in all cop-
ies of the Software, in whole or in part, and all derivative works of the Software,
unless such copies or derivative works are solely in the form of machine-executable
object code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL-
ITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO
EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE
BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Expat XML parser Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Coo-
per
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit per-
sons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
FreeType Font support Portions of this software are copyright © 2008 The FreeType Project
(www.freetype.org). All rights reserved.


APPENDIX B 61

Library Description License
FTGL OpenGL support FTGL - OpenGL font library
Copyright © 2001-2004 Henry Maddocks ftgl@opengl.geek.nz
Copyright © 2008 Sam Hocevar sam@zoy.org
Copyright © 2008 Sean Morrison learner@brlcad.org
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit per-
sons to whom the Software is furnished to do so, subject to the following conditions
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.


APPENDIX C 62
End User License Agreement

APPENDIX C

IMPORTANT: BY INSTALLING THIS SOFTWARE YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,
UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO THE TERMS
OF THIS AGREEMENT DO NOT INSTALL, COPY OR USE THE SOFTWARE.
This END USER SOFTWARE LICENSE AGREEMENT (this "Agreement") is made by and between The Foundry Visionmon-
gers Ltd., a company registered in England and Wales, ("The Foundry"), and you, as either an individual or a single
entity ("Licensee").
In consideration of the mutual covenants contained herein and for other good and valuable consideration (the receipt
and sufficiency of which is acknowledged by each party hereto) the parties agree as follows:

SECTION 1. GRANT OF LICENSE.
Subject to the limitations of Section 2, The Foundry hereby grants to Licensee a limited, non-transferable and non-
exclusive license to install and use a machine readable, object code version of this software program (the "Software")
and the accompanying user guide and other documentation (collectively, the "Documentation") solely for Licensee's
own internal business purposes (collectively, the "License"); provided, however, Licensee's right to install and use the
Software and the Documentation is limited to those rights expressly set out in this Agreement.

SECTION 2. RESTRICTIONS ON USE.
Licensee is authorized to use the Software in machine readable, object code form only, and Licensee shall not: (a)
assign, sublicense, transfer, pledge, lease, rent, share or export the Software, the Documentation or Licensee's rights
hereunder; (b) alter or circumvent the copy protection mechanisms in the Software or reverse engineer, decompile,
disassemble or otherwise attempt to discover the source code of the Software; (c) modify, adapt, translate or create
derivative works based on the Software or Documentation; (d) use, or allow the use of, the Software or Documenta-
tion on any project other than a project produced by Licensee (an "Authorized Project"); (e) allow or permit anyone
(other than Licensee and Licensee's authorized employees to the extent they are working on an Authorized Project) to
use or have access to the Software or Documentation; (f) copy or install the Software or Documentation other than
as expressly provided for herein; or (g) take any action, or fail to take action, that could adversely affect the trade-
marks, service marks, patents, trade secrets, copyrights or other intellectual property rights of The Foundry or any
third party with intellectual property rights in the Software (each, a "Third Party Licensor"). Furthermore, for pur-
poses of this Section 2, the term "Software" shall include any derivatives of the Software.
Licensee shall install and use only a single copy of the Software on one computer, unless the Software is installed in
a "floating license" environment, in which case Licensee may install the Software on more than one computer; pro-
vided, however, Licensee shall not at any one time use more copies of the Software than the total number of valid
Software licenses purchased by Licensee.
Furthermore, the Software can be licensed on an "interactive" or "non-interactive" basis. Licensee shall be authorized
to use a non-interactive version of the Software for rendering purposes only (i.e., on a CPU, without a user, in a non-
interactive capacity) and shall not use such Software on workstations or otherwise in a user-interactive capacity.
Licensee shall be authorized to use an interactive version of the Software for both interactive and non-interactive
rendering purposes, if available.


APPENDIX C 63

Finally, if the Software is an "Educational Version," Licensee may use it only for the purpose of training and instruc-
tion, and for no other purpose. Educational Versions of the Software may not be used for commercial, professional or
for-profit purposes.

SECTION 3. BACK-UP COPY.
Notwithstanding Section 2, Licensee may store one copy of the Software and Documentation off-line and off-site in
a secured location owned or leased by Licensee in order to provide a back-up in the event of destruction by fire,
flood, acts of war, acts of nature, vandalism or other incident. In no event may Licensee use the back-up copy of the
Software or Documentation to circumvent the usage or other limitations set forth in this Agreement.

SECTION 4. OWNERSHIP.
Licensee acknowledges that the Software and Documentation and all intellectual property rights relating thereto are
and shall remain the sole property of The Foundry and the Third Party Licensors. Licensee shall not remove, or allow
the removal of, any copyright or other proprietary rights notice included in and on the Software or Documentation or
take any other action that could adversely affect the property rights of The Foundry or any Third Party Licensor. To
the extent that Licensee is authorized to make copies of the Software or Documentation under this Agreement,
Licensee shall reproduce in and on all such copies any copyright and/or other proprietary rights notices provided in
and on the materials supplied by The Foundry hereunder. Nothing in this Agreement shall be deemed to give Licensee
any rights in the trademarks, service marks, patents, trade secrets, copyrights or other intellectual property rights of
The Foundry or any Third Party Licensor, and Licensee shall be strictly prohibited from using the name, trademarks or
service marks of The Foundry or any Third Party Licensor in Licensee's promotion or publicity without The Foundry's
express written approval.

SECTION 5. LICENSE FEE.
Licensee understands that the benefits granted to Licensee hereunder are contingent upon Licensee's payment in full
of the license fee payable in connection herewith (the "License Fee").

SECTION 6. TAXES AND DUTIES.
Licensee agrees to pay, and indemnify The Foundry from claims for, any local, state or national tax (exclusive of taxes
based on net income), duty, tariff or other impost related to or arising from the transaction contemplated by this
Agreement.

SECTION 7. LIMITED WARRANTY.
The Foundry warrants that, for a period of ninety (90) days after delivery of the Software: (a) the machine readable
electronic files constituting the Software and Documentation shall be free from errors that may arise from the elec-
tronic file transfer from The Foundry and/or its authorized reseller to Licensee; and (b) to the best of The Foundry's
knowledge, Licensee's use of the Software in accordance with the Documentation will not, in and of itself, infringe
any third party's copyright, patent or other intellectual property rights. Except as warranted, the Software and Doc-
umentation is being provided "as is." THE FOREGOING LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES
OR CONDITIONS, EXPRESS OR IMPLIED, AND The Foundry DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OR CON-
DITIONS, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF TITLE, NON-INFRINGEMENT, MERCHANT-


APPENDIX C 64

ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, REGARDLESS OF WHETHER The Foundry KNOWS OR HAS REASON
TO KNOW OF LICENSEE'S PARTICULAR NEEDS. The Foundry does not warrant that the Software or Documentation
will meet Licensee's requirements or that Licensee's use of the Software will be uninterrupted or error free. No
employee or agent of The Foundry is authorized to modify this limited warranty, nor to make additional warranties.
No action for any breach of the above limited warranty may be commenced more than one (1) year after Licensee's
initial receipt of the Software. To the extent any implied warranties may not be disclaimed under applicable law, then
ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO NINETY (90) DAYS AFTER DELIVERY OF THE SOFTWARE
TO LICENSEE.

SECTION 8. LIMITED REMEDY.
The exclusive remedy available to the Licensee in the event of a breach of the foregoing limited warranty, TO THE
EXCLUSION OF ALL OTHER REMEDIES, is for Licensee to destroy all copies of the Software, send The Foundry a writ-
ten certification of such destruction and, upon The Foundry's receipt of such certification, The Foundry will make a
replacement copy of the Software available to Licensee.

SECTION 9. INDEMNIFICATION.
Licensee agrees to indemnify, hold harmless and defend The Foundry and The Foundry's affiliates, officers, directors,
shareholders, employees, authorized resellers, agents and other representatives (collectively, the "Released Parties")
from all claims, defense costs (including, but not limited to, attorneys' fees), judgments, settlements and other
expenses arising from or connected with the operation of Licensee's business or Licensee's possession or use of the
Software or Documentation.

SECTION 10. LIMITED LIABILITY.
In no event shall the Released Parties' cumulative liability to Licensee or any other party for any loss or damages
resulting from any claims, demands or actions arising out of or relating to this Agreement (or the Software or Docu-
mentation contemplated herein) exceed the License Fee paid to The Foundry or its authorized reseller for use of the
Software. Furthermore, IN NO EVENT SHALL THE RELEASED PARTIES BE LIABLE TO LICENSEE UNDER ANY THEORY
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING DAM-
AGES FOR LOSS OF BUSINESS OR LOSS OF PROFITS) OR THE COST OF PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES, REGARDLESS OF WHETHER THE RELEASED PARTIES KNOW OR HAVE REASON TO KNOW OF THE POSSI-
BILITY OF SUCH DAMAGES AND REGARDLESS OF WHETHER ANY REMEDY SET FORTH HEREIN FAILS OF ITS ESSEN-
TIAL PURPOSE. No action arising out of or related to this Agreement, regardless of form, may be brought by Licensee
more than one (1) year after Licensee's initial receipt of the Software; provided, however, to the extent such one (1)
year limit may not be valid under applicable law, then such period shall limited to the shortest period allowed by law.

SECTION 11. TERM; TERMINATION.
This Agreement is effective upon Licensee's acceptance of the terms hereof (by clicking on the "Accept" button) and
Licensee's payment of the License Fee, and the Agreement will remain in effect until termination. If Licensee breaches
this Agreement, The Foundry may terminate the License granted hereunder by notice to Licensee. In the event the
License is terminated, Licensee will either return to The Foundry all copies of the Software and Documentation in
Licensee's possession or, if The Foundry directs in writing, destroy all such copies. In the later case, if requested by


APPENDIX C 65

The Foundry, Licensee shall provide The Foundry with a certificate signed by an officer of Licensee confirming that
the foregoing destruction has been completed.

SECTION 12. CONFIDENTIALITY.
Licensee agrees that the Software and Documentation are proprietary and confidential information of The Foundry
and that all such information and any communications relating thereto (collectively, "Confidential Information") are
confidential and a fundamental and important trade secret of The Foundry. Licensee shall disclose Confidential Infor-
mation only to Licensee's employees who are working on an Authorized Project and have a "need-to-know" such Con-
fidential Information, and shall advise any recipients of Confidential Information that it is to be used only as
authorized in this Agreement. Licensee shall not disclose Confidential Information or otherwise make any Confidential
Information available to any other of Licensee's employees or to any third parties without the express written con-
sent of The Foundry. Licensee agrees to segregate, to the extent it can be reasonably done, the Confidential Informa-
tion from the confidential information and materials of others in order to prevent commingling. Licensee shall take
reasonable security measures, which such measures shall be at least as great as the measures Licensee uses to keep
Licensee's own confidential information secure (but in any case using no less than a reasonable degree of care), to
hold the Software, Documentation and any other Confidential Information in strict confidence and safe custody. The
Foundry may request, in which case Licensee agrees to comply with, certain reasonable security measures as part of
the use of the Software and Documentation. Licensee acknowledges that monetary damages may not be a sufficient
remedy for unauthorized disclosure of Confidential Information, and that The Foundry shall be entitled, without waiv-
ing any other rights or remedies, to such injunctive or equitable relief as may be deemed proper by a court of compe-
tent jurisdiction.

SECTION 13. INSPECTION.
Licensee shall advise The Foundry on demand of all locations where the Software or Documentation is used or stored.
Licensee shall permit The Foundry or its authorized agents to inspect all such locations during normal business hours
and on reasonable advance notice.

SECTION 14. NONSOLICITATION.
Licensee agrees not to solicit for employment or retention, and not to employ or retain, any of The Foundry's current
or future employees who were or are involved in the development and/or creation of the Software.

SECTION 15. U.S. GOVERNMENT LICENSE RIGHTS.
The Software, Documentation and/or data delivered hereunder are subject to the terms of this Agreement and in no
event shall the U.S. Government acquire greater than RESTRICTED/LIMITED RIGHTS. At a minimum, use, duplication or
disclosure by the U.S. Government is subject to the applicable restrictions of: (i) FAR §52.227-14 ALTS I, II and III
(June 1987); (ii) FAR §52.227-19 (June 1987); (iii) FAR §12.211 and 12.212; and/or (iv) DFARS §227.7202-1(a) and
DFARS §227.7202-3.
The Software is the subject of the following notices:
* Copyright (c) 2011 The Foundry Visionmongers, Ltd.. All Rights Reserved.
* Unpublished-rights reserved under the Copyright Laws of the United Kingdom.


APPENDIX C 66

SECTION 16. SURVIVAL.
Sections 2, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16, 17 and 18 shall survive any termination or expiration of this
Agreement.

SECTION 17. IMPORT/EXPORT CONTROLS.
To the extent that any Software made available hereunder is subject to restrictions upon export and/or reexport
from the United States, Licensee agrees to comply with, and not act or fail to act in any way that would violate, the
applicable international, national, state, regional and local laws and regulations, including, without limitation, the
United States Foreign Corrupt Practices Act, the Export Administration Act and the Export Administration Regula-
tions, as amended or otherwise modified from time to time, and neither The Foundry nor Licensee shall be required
under this Agreement to act or fail to act in any way which it believes in good faith will violate any such laws or reg-
ulations.

SECTION 18. MISCELLANEOUS.
This Agreement is the exclusive agreement between the parties concerning the subject matter hereof and supersedes
any and all prior oral or written agreements, negotiations, or other dealings between the parties concerning such
subject. This Agreement may be modified only by a written instrument signed by both parties. If any action is brought
by either party to this Agreement against the other party regarding the subject matter hereof, the prevailing party
shall be entitled to recover, in addition to any other relief granted, reasonable attorneys' fees and expenses of litiga-
tion. Should any term of this Agreement be declared void or unenforceable by any court of competent jurisdiction,
such declaration shall have no effect on the remaining terms of this Agreement. The failure of either party to enforce
any rights granted hereunder or to take action against the other party in the event of any breach hereunder shall not
be deemed a waiver by that party as to subsequent enforcement of rights or subsequent actions in the event of
future breaches. This Agreement shall be governed by, and construed in accordance with English Law.
Copyright (c) 2011 The Foundry Visionmongers Ltd. All Rights Reserved. Do not duplicate.


INDEX 67
A-Z

INDEX

A-Z I Status 11
Images Status View 20
Downloadable examples 31 Suppression 28, 29
A
Inside Masks 24
Advanced Keying 13
T
M The Foundry
B
Matte About Us 5
Basic Keying 10 Tutorial 31
black pixels Combined Matte 19
Erode 23 images 31
See Status 12
Grow 23 Introduction 31
blue pixels Tutorial 1 31
See Status 21 Processing 21
Rollback 22 Tutorial 2 34
blue spill 15
Screen Matte 19, 21 Tutorial 3 36
Brightness 27, 29 Tutorial 4 40
Shrink 23
Status 19 Tutorial 5 43
C
Clip Black 18 V
O
Clip Levels 18 View 11, 19
Clip Rollback 22 Outside Masks 24
Clip White 18
R W
Colour Balancing 28, 29
Colour Correction 27 red pixels white pixels
See Status 21 See Status 12
Colour Replacement 23
Release Notes 49 www.thefoundry.co.uk 6
Colour Suppression 28
Contrast 27, 28 Render Controls
Cropping 29 Colour Correction Edges 19
Crops 29 Combined Matte 19
Corrected Source 19
D Final Result 19
Inside Mask 19
Despill Bias 12
Intermediate Result 19
Despot 23
Outside Mask 19
Screen Matte 19
E
Source 19
Edge Colour Suppression 29
Source Alpha 19
Edge Correction 28
Status 19
End User License Agreement 62
Replace Method 24
Erode 23
Requirements 50, 51, 52, 53, 54, 55,
Example Images 31 56, 57, 58
eye dropper 10 Rollback 22
G S
Getting Started 7 Saturation 27, 28
green pixels Screen Balance 15
See Status 20 Screen Colour 10, 13
grey pixels Screen Matte 21
See Status 12 Shrink 23
Grow 23 Source Alpha 26


Keylight 1.2 ae

More Related Content

What's hot (8)

Similar to Keylight 1.2 ae (20)

Keylight 1.2 ae