Less01 Dba1

Editor's Notes

• #3: Oracle Database 11 g : Administration Workshop I 1 - Objectives This lesson provides a detailed overview of the Oracle Database architecture. You learn about the physical and logical structures and about various components.
• #4: Oracle Database 11 g : Administration Workshop I 1 - Oracle Database A database is a collection of data treated as a unit. The purpose of a database is to store and retrieve related information. Oracle Database reliably manages a large amount of data in a multiuser environment so that many users can concurrently access the same data. This is accomplished while delivering high performance. At the same time, it prevents unauthorized access and provides efficient solutions for failure recovery.
• #5: Connecting to a Server A database user can connect to an Oracle server in one of three ways: The user logs on to the operating system running the Oracle instance and starts an application or tool that accesses the database on that system. The communication pathway is established using the interprocess communication mechanisms available on the host operating system. The user starts the application or tool on a local computer and connects over a network to the computer running the Oracle database. In this configuration (called client/server ), network software is used to communicate between the user and the back-end server. The client/server architecture database system has two parts: a front end (client) and a back end (server) connected through a network. Network software is used to communicate between the user and the Oracle server. The client is a database application that initiates a request for an operation to be performed on the database server. It requests, processes, and presents data managed by the server. The client workstation can be optimized for its job. For example, the client might not need large disk capacity, or it might benefit from graphic capabilities. Often, the client runs on a different computer than the database server. Many clients can simultaneously run against one server.
• #6: Connecting to a Server (continued) The server runs Oracle Database software and handles the functions required for concurrent, shared data access. The server receives and processes requests that originate from client applications. The computer that manages the server can be optimized for its duties. For example, the server computer can have large disk capacity and fast processors. The user accesses an application server through a tool (such as a Web browser) on the local computer (client). The application server then interacts with a back-end database server on behalf of the client. A traditional multitier architecture has the following components: A client or initiator process that starts an operation One or more application servers that perform parts of the operation. An application server contains a large part of the application logic, provides access to the data for the client, and performs some query processing, thus removing some of the load from the database server. The application server can serve as an interface between clients and multiple database servers and can provide an additional level of security. An end server or database server that stores most of the data used in the operation This architecture enables use of an application server to do the following: Validate the credentials of a client (such as a Web browser) Connect to an Oracle Database server Perform the requested operation on behalf of the client
• #7: Oracle Database Architecture An Oracle database consists of an instance and its associated databases. The instance consists of memory structures and background processes. Every time an instance is started, a shared memory area called the System Global Area (SGA) is allocated and the background processes are started. The database consists of both physical structures and logical structures. Because the physical and logical structures are separate, the physical storage of data can be managed without affecting access to logical storage structures.
• #8: Connecting to the Database Connections and sessions are closely related to user processes but are very different in meaning. A connection is a communication pathway between a user process and an Oracle Database instance. A communication pathway is established using available interprocess communication mechanisms (on a computer that runs both the user process and Oracle Database) or network software (when different computers run the database application and Oracle Database, and communicate through a network). A session represents the state of a current user login to the database instance . For example, when a user starts SQL*Plus, the user must provide a valid username and password, and then a session is established for that user. A session lasts from the time a user connects until the user disconnects or exits the database application. In the case of a dedicated connection, the session is serviced by a permanent dedicated process. The session is serviced by an available server process selected from a pool, either by the middle tier or by Oracle shared server architecture. Multiple sessions can be created and exist concurrently for a single Oracle database user using the same username. For example, a user with the username/password of HR / HR can connect to the same Oracle Database instance several times.
• #9: Interacting with an Oracle Database The following example describes Oracle database operations at the most basic level. It illustrates an Oracle database configuration in which the user and associated server process are on separate computers, connected through a network. 1. An instance has started on a node where Oracle Database is installed, often called the host or database server . 2. A user starts an application spawning a user process. The application attempts to establish a connection to the server. (The connection may be local, client/server, or a three-tier connection from a middle tier.) 3. The server runs a listener that has the appropriate Oracle Net Services handler. The server detects the connection request from the application and creates a dedicated server process on behalf of the user process. 4. The user runs a DML-type SQL statement and commits the transaction. For example, the user changes the address of a customer in a table and commits the change. 5. The server process receives the statement and checks the shared pool (an SGA component) for any shared SQL area that contains a similar SQL statement. If a shared SQL area is found, the server process checks the user’s access privileges to the requested data, and the existing shared SQL area is used to process the statement. If a shared SQL area is not found, a new shared SQL area is allocated for the statement so that it can be parsed and processed.
• #10: Interacting with an Oracle Database (continued) 6. The server process retrieves any necessary data values, either from the actual data file (table) or from values stored in the SGA. 7. The server process modifies data in the SGA. Because the transaction is committed, the LogWriter process (LGWR) immediately records the transaction in the redo log file. The Database Writer process (DBW n ) writes modified blocks permanently to disk when it is efficient to do so. 8. If the transaction is successful, the server process sends a message across the network to the application. If it is not successful, an error message is transmitted. 9. Throughout this entire procedure, the other background processes run, watching for conditions that require intervention. In addition, the database server manages other users’ transactions and prevents contention between transactions that request the same data.
• #11: Oracle Database 11 g : Administration Workshop I 1 - Oracle Database Server Structures After starting an instance, the Oracle software associates the instance with a specific database. This is called mounting the database . The database is then ready to be opened, which makes it accessible to authorized users. Multiple instances can execute concurrently on the same computer, each accessing its own physical database. You can look at the Oracle Database architecture as various interrelated structural components. An Oracle instance uses memory structures and processes to manage and access the database. All memory structures exist in the main memory of the computers that constitute the database server. Processes are jobs that work in the memory of these computers. A process is defined as a “thread of control” or a mechanism in an operating system that can run a series of steps.
• #12: Oracle Database 11 g : Administration Workshop I 1 - Oracle Database Memory Structures Oracle Database creates and uses memory structures for various purposes. For example, memory stores program code being run, data that is shared among users, and private data areas for each connected user. Two basic memory structures are associated with an instance: System Global Area (SGA): Group of shared memory structures, known as SGA components, that contain data and control information for one Oracle Database instance. The SGA is shared by all server and background processes. Examples of data stored in the SGA include cached data blocks and shared SQL areas. Program Global Areas (PGA): Memory regions that contain data and control information for a server or background process. A PGA is nonshared memory created by Oracle Database when a server or background process is started. Access to the PGA is exclusive to the server process. Each server process and background process has its own PGA.
• #13: Oracle Database 11 g : Administration Workshop I 1 - Oracle Database Memory Structures (continued) The SGA is the memory area that contains data and control information for the instance. The SGA includes the following data structures: Database buffer cache: Caches blocks of data retrieved from the database Redo log buffer: Caches redo information (used for instance recovery) until it can be written to the physical redo log files stored on the disk Shared pool: Caches various constructs that can be shared among users Large pool: Optional area that provides large memory allocations for certain large processes, such as Oracle backup and recovery operations, and I/O server processes Java pool: Used for all session-specific Java code and data in the Java Virtual Machine (JVM) Streams pool: Used by Oracle Streams to store information required by capture and apply When you start the instance by using Enterprise Manager or SQL*Plus, the amount of memory allocated for the SGA is displayed. A Program Global Area (PGA) is a memory region that contains data and control information for each server process. An Oracle server process services a client’s requests. Each server process has its own private PGA that is created when the server process is started. Access to the PGA is exclusive to that server process, and the PGA is read and written only by the Oracle code acting on its behalf. With the dynamic SGA infrastructure, the sizes of the database buffer cache, the shared pool, the large pool, the Java pool, and the Streams pool change without shutting down the instance. The Oracle database uses initialization parameters to create and manage memory structures. The simplest way to manage memory is to allow the database to automatically manage and tune it for you. To do so (on most platforms), you only have to set a target memory size initialization parameter ( MEMORY_TARGET ) and a maximum memory size initialization parameter ( MEMORY_MAX_TARGET ).
• #14: Database Buffer Cache The database buffer cache is the portion of the SGA that holds copies of data blocks that are read from data files. All users who are concurrently connected to the instance share access to the database buffer cache. The first time an Oracle Database user process requires a particular piece of data, it searches for the data in the database buffer cache. If the process finds the data already in the cache (a cache hit), it can read the data directly from memory. If the process cannot find the data in the cache (a cache miss), it must copy the data block from a data file on disk into a buffer in the cache before accessing the data. Accessing data through a cache hit is faster than data access through a cache miss. The buffers in the cache are managed by a complex algorithm that uses a combination of least recently used (LRU) lists and touch count.
• #15: Redo Log Buffer The redo log buffer is a circular buffer in the SGA that holds information about changes made to the database. This information is stored in redo entries. Redo entries contain the information necessary to reconstruct (or redo) changes that are made to the database by DML, DDL, or internal operations. Redo entries are used for database recovery if necessary. Redo entries are copied by Oracle Database processes from the user’s memory space to the redo log buffer in the SGA. The redo entries take up continuous, sequential space in the buffer. The LGWR background process writes the redo log buffer to the active redo log file (or group of files) on disk.
• #16: Shared Pool The shared pool portion of the SGA contains the library cache, the data dictionary cache, the SQL query result cache, the PL/SQL function result cache, buffers for parallel execution messages, and control structures. The data dictionary is a collection of database tables and views containing reference information about the database, its structures, and its users. Oracle Database accesses the data dictionary frequently during SQL statement parsing. This access is essential to the continuing operation of Oracle Database. The data dictionary is accessed so often by Oracle Database that two special locations in memory are designated to hold dictionary data. One area is called the data dictionary cache , also known as the row cache because it holds data as rows instead of buffers (which hold entire blocks of data). The other area in memory to hold dictionary data is the library cache . All Oracle Database user processes share these two caches for access to data dictionary information. Oracle Database represents each SQL statement that it runs with a shared SQL area (as well as a private SQL area kept in the PGA). Oracle Database recognizes when two users are executing the same SQL statement and reuses the shared SQL area for those users.
• #17: Shared Pool (continued) A shared SQL area contains the parse tree and execution plan for a given SQL statement. Oracle Database saves memory by using one shared SQL area for SQL statements run multiple times, which often happens when many users run the same application. When a new SQL statement is parsed, Oracle Database allocates memory from the shared pool to store in the shared SQL area. The size of this memory depends on the complexity of the statement. Oracle Database processes PL/SQL program units (procedures, functions, packages, anonymous blocks, and database triggers) in much the same way it processes individual SQL statements. Oracle Database allocates a shared area to hold the parsed, compiled form of a program unit. Oracle Database allocates a private area to hold values specific to the session that runs the program unit, including local, global, and package variables (also known as package instantiation ) and buffers for executing SQL. If more than one user runs the same program unit, then a single, shared area is used by all users, while all users maintain separate copies of their own private SQL areas, holding values specific to their own sessions. Individual SQL statements contained in a PL/SQL program unit are processed just like other SQL statements. Despite their origins in a PL/SQL program unit, these SQL statements use a shared area to hold their parsed representations and a private area for each session that runs the statement. The SQL query result cache and PL/SQL function result cache are new to Oracle Database 11 g . They share the same infrastructure, appear in the same dynamic performance ( $V ) views, and are administered using the same supplied package. Results of queries and query fragments can be cached in memory in the SQL query result cache . The database can then use cached results to answer future executions of these queries and query fragments. Because retrieving results from the SQL query result cache is faster than rerunning a query, frequently run queries experience a significant performance improvement when their results are cached. A PL/SQL function is sometimes used to return the result of a computation whose inputs are one or several parameterized queries issued by the function. In some cases, these queries access data that changes very infrequently compared to the frequency of calling the function. You can include syntax in the source text of a PL/SQL function to request that its results be cached in the PL/SQL function result cache and (to ensure correctness) that the cache be purged when tables in a list of tables experience DML.
• #18: Allocation and Reuse of Memory in the Shared Pool In general, any item (shared SQL area or dictionary row) in the shared pool remains until it is flushed according to a modified LRU (least recently used) algorithm. The memory for items that are not being used regularly is freed if space is required for new items that must be given some space in the shared pool. A modified LRU algorithm allows shared pool items that are used by many sessions to remain in memory as long as they are useful, even if the process that originally created the item terminates. As a result, the overhead and processing of SQL statements associated with a multiuser Oracle Database system are minimized. When a SQL statement is submitted to Oracle Database for execution, the following memory allocation steps are automatically performed: 1. Oracle Database checks the shared pool to see if a shared SQL area already exists for an identical statement. If so, that shared SQL area is used for the execution of the subsequent new instances of the statement. If there is no shared SQL area for a statement, Oracle Database allocates a new shared SQL area in the shared pool. In either case, the user’s private SQL area is associated with the shared SQL area that contains the statement.
• #19: Allocation and Reuse of Memory in the Shared Pool (continued) 2. Oracle Database allocates a private SQL area on behalf of the session. The location of the private SQL area depends on the type of connection established for the session. Note: A shared SQL area can be flushed from the shared pool even if the shared SQL area corresponds to an open cursor that has not been used for some time. If the open cursor is subsequently used to run its statement, Oracle Database reparses the statement and a new shared SQL area is allocated in the shared pool. Oracle Database also flushes a shared SQL area from the shared pool in these circumstances: When the DBMS_STATS package is used to update or delete the statistics of a table, cluster, or index, all shared SQL areas that contain statements referencing the analyzed schema object are flushed from the shared pool. The next time a flushed statement is run, the statement is parsed in a new shared SQL area to reflect the new statistics for the schema object. If a schema object is referenced in a SQL statement and that object is later modified in any way, the shared SQL area is invalidated (marked invalid) and the statement must be reparsed the next time it is run. If you change a database’s global database name, all information is flushed from the shared pool. The administrator can manually flush all information in the shared pool to assess the performance (with respect to the shared pool, not the data buffer cache) that can be expected after instance startup without shutting down the current instance. The ALTER SYSTEM FLUSH SHARED_POOL statement is used to do this.
• #20: Large Pool The database administrator can configure an optional memory area called the large pool to provide large memory allocations for: Session memory for the shared server and the Oracle XA interface (used where transactions interact with more than one database): I/O server processes Oracle Database backup and restore operations By allocating session memory from the large pool for shared server, Oracle XA, or parallel query buffers, Oracle Database can use the shared pool primarily for caching shared SQL and avoid the performance overhead that is caused by shrinking the shared SQL cache. In addition, the memory for Oracle Database backup and restore operations, for I/O server processes, and for parallel buffers is allocated in buffers of a few hundred kilobytes. The large pool is better able to satisfy such large memory requests than the shared pool. The large pool does not have an LRU list. It is different from reserved space in the shared pool, which uses the same LRU list as other memory allocated from the shared pool.
• #21: Java Pool and Streams Pool Java pool memory is used in server memory for all session-specific Java code and data in the JVM. Java pool memory is used in different ways, depending on the mode in which Oracle Database is running. The Java Pool Advisor statistics provide information about library cache memory used for Java and predict how changes in the size of the Java pool can affect the parse rate. The Java Pool Advisor is internally turned on when statistics_level is set to TYPICAL or higher. These statistics reset when the advisor is turned off. The Streams pool is used exclusively by Oracle Streams. The Streams pool stores buffered queue messages, and it provides memory for Oracle Streams capture processes and apply processes. Unless you specifically configure it, the size of the Streams pool starts at zero. The pool size grows dynamically as needed when Oracle Streams is used. Note: A detailed discussion of Java programming and Oracle Streams is beyond the scope of this class
• #22: Process Architecture The processes in an Oracle Database system can be divided into two major groups: User processes that run the application or Oracle tool code Oracle Database processes that run the Oracle database server code (including server processes and background processes) When a user runs an application program or an Oracle tool such as SQL*Plus, Oracle Database creates a user process to run the user’s application. Oracle Database also creates a server process to execute the commands issued by the user process. In addition, the Oracle server also has a set of background processes for an instance that interact with each other and with the operating system to manage the memory structures, asynchronously perform I/O to write data to disk, and perform other required tasks. The process structure varies for different Oracle Database configurations, depending on the operating system and the choice of Oracle Database options. The code for connected users can be configured as a dedicated server or a shared server. Dedicated server: For each user, the database application is run by a user process that is served by a dedicated server process that executes Oracle database server code. Shared server: Eliminates the need for a dedicated server process for each connection. A dispatcher directs multiple incoming network session requests to a pool of shared server processes. A shared server process serves any client request.
• #23: Oracle Database 11 g : Administration Workshop I 1 - Process Structures Server Processes Oracle Database creates server processes to handle the requests of user processes connected to the instance. In some situations, when the application and Oracle Database operate on the same computer, it is possible to combine the user process and corresponding server process into a single process to reduce system overhead. However, when the application and Oracle Database operate on different computers, a user process always communicates with Oracle Database through a separate server process. Server processes created on behalf of each user’s application can perform one or more of the following: Parse and run SQL statements issued through the application Read necessary data blocks from data files on disk into the shared database buffers of the SGA (if the blocks are not already present in the SGA) Return results in such a way that the application can process the information Background Processes To maximize performance and accommodate many users, a multiprocess Oracle Database system uses some additional Oracle Database processes called background processes . An Oracle Database instance can have many background processes.
• #24: Process Structures (continued) The background processes commonly seen in non-RAC, non-ASM environments can include the following: Database writer process (DBW n ) Log writer process (LGWR) Checkpoint process (CKPT) System Monitor process (SMON) Process monitor process (PMON) Recoverer process (RECO) Job queue processes Archiver processes (ARC n ) Queue monitor processes (QMN n ) Other background processes may be found in more advanced configurations such as RAC. See the V$BGPROCESS view for more information on the background processes. On many operating systems, background processes are created automatically when an instance is started.
• #25: Database Writer Process (DBW n ) The Database Writer process (DBW n ) writes the contents of buffers to data files. The DBW n processes are responsible for writing modified (dirty) buffers in the database buffer cache to disk. Although one Database Writer process (DBW 0 ) is adequate for most systems, you can configure additional processes (DBW 1 through DBW 9 and DBW a through DBW j ) to improve write performance if your system modifies data heavily. These additional DBW n processes are not useful on uniprocessor systems. When a buffer in the database buffer cache is modified, it is marked dirty and is added to the LRUW (LRU write) list of dirty buffers that is kept in SCN order. This order therefore matches the order of redo that is written to the redo logs for these changed buffers. When the number of available buffers in the buffer cache falls below an internal threshold (to the extent that server processes find it difficult to obtain available buffers), DBW n writes dirty buffers to the data files in the order that they were modified by following the order of the LRUW list.
• #26: Database Writer Process (DBW n ) (continued) The SGA contains a memory structure that has the redo byte address (RBA) of the position in the redo stream where recovery should begin in the case of an instance failure. This structure acts as a pointer into the redo and is written to the control file by the CKPT process once every three seconds. Because the DBW n writes dirty buffers in SCN order, and because the redo is in SCN order, every time DBW n writes dirty buffers from the LRUW list, it also advances the pointer held in the SGA memory structure so that instance recovery (if required) begins reading the redo from approximately the correct location and avoids unnecessary I/O. This is known as incremental checkpointing . Note: There are other cases when DBW n may write (for example, when tablespaces are made read-only or are placed offline). In such cases, no incremental checkpoint occurs because dirty buffers belonging only to the corresponding data files are written to the database unrelated to the SCN order . The LRU algorithm keeps more frequently accessed blocks in the buffer cache so that, when a buffer is written to disk, it is unlikely to contain data that will soon be useful. The DB_WRITER_PROCESSES initialization parameter specifies the number of DBW n processes. The maximum number of DBW n processes is 20. If it is not specified by the user during startup, Oracle Database determines how to set DB_WRITER_PROCESSES based on the number of CPUs and processor groups. The DBW n process writes dirty buffers to disk under the following conditions: When a server process cannot find a clean reusable buffer after scanning a threshold number of buffers, it signals DBW n to write. DBW n writes dirty buffers to disk asynchronously while performing other processing. DBW n periodically writes buffers to advance the checkpoint, which is the position in the redo thread (log) from which instance recovery begins. This log position is determined by the oldest dirty buffer in the buffer cache. In all cases, DBW n performs batched (multiblock) writes to improve efficiency. The number of blocks written in a multiblock write varies by operating system.
• #27: LogWriter Process (LGWR) The LogWriter process (LGWR) is responsible for redo log buffer management by writing the redo log buffer entries to a redo log file on disk. LGWR writes all redo entries that have been copied into the buffer since the last time it wrote. The redo log buffer is a circular buffer. When LGWR writes redo entries from the redo log buffer to a redo log file, server processes can then copy new entries over the entries in the redo log buffer that have been written to disk. LGWR normally writes fast enough to ensure that space is always available in the buffer for new entries, even when access to the redo log is heavy. LGWR writes one contiguous portion of the buffer to disk. LGWR writes: When a user pLogWriter process commits a transaction When the redo log buffer is one-third full Before a DBW n process writes modified buffers to disk (if necessary)
• #28: Log Writer Process (LGWR) (continued) Before DBW n can write a modified buffer, all redo records that are associated with the changes to the buffer must be written to disk (the write-ahead protocol). If DBW n finds that some redo records have not been written, it signals LGWR to write the redo records to disk and waits for LGWR to complete writing the redo log buffer before it can write out the data buffers. LGWR writes to the current log group. If one of the files in the group is damaged or unavailable, LGWR continues writing to other files in the group and logs an error in the LGWR trace file and in the system alert log. If all files in a group are damaged, or if the group is unavailable because it has not been archived, LGWR cannot continue to function. When a user issues a COMMIT statement, LGWR puts a commit record in the redo log buffer and writes it to disk immediately, along with the transaction’s redo entries. The corresponding changes to data blocks are deferred until it is more efficient to write them. This is called a fast commit mechanism . The atomic write of the redo entry containing the transaction’s commit record is the single event that determines whether the transaction has committed. Oracle Database returns a success code to the committing transaction, although the data buffers have not yet been written to disk. If more buffer space is needed, LGWR sometimes writes redo log entries before a transaction is committed. These entries become permanent only if the transaction is later committed.When a user commits a transaction, the transaction is assigned a system change number (SCN), which Oracle Database records along with the transaction’s redo entries in the redo log. SCNs are recorded in the redo log so that recovery operations can be synchronized in Real Application Clusters and distributed databases. In times of high activity, LGWR can write to the redo log file by using group commits. For example, suppose that a user commits a transaction. LGWR must write the transaction’s redo entries to disk. As this happens, other users issue COMMIT statements. However, LGWR cannot write to the redo log file to commit these transactions until it has completed its previous write operation. After the first transaction’s entries are written to the redo log file, the entire list of redo entries of waiting transactions (not yet committed) can be written to disk in one operation, requiring less I/O than do transaction entries handled individually. Therefore, Oracle Database minimizes disk I/O and maximizes performance of LGWR. If requests to commit continue at a high rate, every write (by LGWR) from the redo log buffer can contain multiple commit records.
• #29: Checkpoint Process (CKPT) A checkpoint is a data structure that defines a system change number (SCN) in the redo thread of a database. Checkpoints are recorded in the control file and in each data file header. They are a crucial element of recovery. When a checkpoint occurs, Oracle Database must update the headers of all data files to record the details of the checkpoint. This is done by the CKPT process. The CKPT process does not write blocks to disk; DBW n always performs that work. The SCNs recorded in the file headers guarantee that all changes made to database blocks prior to that SCN have been written to disk. The statistic DBWR checkpoints displayed by the SYSTEM_STATISTICS monitor in Oracle Enterprise Manager indicate the number of checkpoint requests that have completed.
• #30: System Monitor Process (SMON) The System Monitor process (SMON) performs recovery at instance startup if necessary. SMON is also responsible for cleaning up temporary segments that are no longer in use. If any terminated transactions were skipped during instance recovery because of file-read or offline errors, SMON recovers them when the tablespace or file is brought back online. SMON checks regularly to see whether the process is needed. Other processes can call SMON if they detect a need for it.
• #31: Process Monitor Process (PMON) The Process Monitor process (PMON) performs process recovery when a user process fails. PMON is responsible for cleaning up the database buffer cache and freeing resources that the user process was using. For example, it resets the status of the active transaction table, releases locks, and removes the process ID from the list of active processes. PMON periodically checks the status of dispatcher and server processes, and restarts any that have stopped running (but not any that Oracle Database has terminated intentionally). PMON also registers information about the instance and dispatcher processes with the network listener. Like SMON, PMON checks regularly to see whether it is needed; it can be called if another process detects the need for it.
• #32: Recoverer Process (RECO) The Recoverer process (RECO) is a background process that is used with the distributed database configuration that automatically resolves failures involving distributed transactions. The RECO process of an instance automatically connects to other databases involved in an in-doubt distributed transaction. When the RECO process reestablishes a connection between involved database servers, it automatically resolves all in-doubt transactions, removing from each database’s pending transaction table any rows that correspond to the resolved in-doubt transactions. If the RECO process fails to connect with a remote server, RECO automatically tries to connect again after a timed interval. However, RECO waits an increasing amount of time (growing exponentially) before it attempts another connection.
• #33: Archiver Processes (ARC n ) The archiver processes (ARC n ) copy redo log files to a designated storage device after a log switch has occurred. ARC n processes are present only when the database is in ARCHIVELOG mode and automatic archiving is enabled. If you anticipate a heavy workload for archiving (such as during bulk loading of data), you can increase the maximum number of archiver processes with the LOG_ARCHIVE_MAX_PROCESSES initialization parameter. The ALTER SYSTEM statement can change the value of this parameter dynamically to increase or decrease the number of ARC n processes.
• #34: Other Processes There are several other background processes that might be running. These can include the following: The Manageability Monitor process (MMON) performs various manageability-related background tasks, for example: Issuing alerts whenever a given metrics violates its threshold value Taking snapshots by spawning additional process (MMON slaves) Capturing statistics value for SQL objects that have been recently modified The Lightweight Manageability Monitor process (MMNL) performs frequent tasks related to lightweight manageability, such as session history capture and metrics computation. The Memory Manager process (MMAN) is used for internal database tasks. It manages automatic memory management processing to help allocate memory where it is needed dynamically in an effort to avoid out-of-memory conditions or poor buffer cache performance.
• #35: Oracle Database 11 g : Administration Workshop I 1 - Other Processes (continued) The Rebalance process (RBAL) coordinates rebalance activity for disk groups in an Automatic Storage Management instance. It performs a global open on Automatic Storage Management disks. ORBn performs the actual rebalance data extent movements in an Automatic Storage Management instance. There can be many of these at a time, named ORB0, ORB1, and so on. The Automatic Storage Management process (ASMB) is present in a database instance using an Automatic Storage Management disk group. It communicates with the Automatic Storage Management instance. Job queue processes are used for batch processing. They run user jobs and can be viewed as scheduler services that are used to schedule jobs as PL/SQL statements or procedures on an Oracle Database instance. The coordinator process, named CJQ0, periodically selects jobs that need to be run from the system JOB$ table. The CJQ0 process dynamically spawns job queue slave processes (J000 through J999) to run the jobs. The job queue process runs one of the jobs that was selected by the CJQ0 process for execution. The processes run one job at a time. The Queue Monitor process (QMNx) is an optional background process for Oracle Streams Advanced Queuing, which monitors the message queues. You can configure up to 10 queue monitor processes.
• #36: Server Process and Database Buffer Cache When a query is processed, the Oracle server process looks in the database buffer cache for images of any blocks that it needs. If the block image is not found in the database buffer cache, the server process reads the block from the data file and places a copy in the database buffer cache. Because subsequent requests for the same block may find the block in memory, the requests may not require physical reads. Buffers in the buffer cache can be in one of the following four states: Pinned: Multiple sessions are kept from writing to the same block at the same time. Other sessions wait to access the block. Clean: The buffer is now unpinned and is a candidate for immediate aging out, if the current contents (data block) are not referenced again. Either the contents are in sync with the block contents stored on the disk, or the buffer contains a consistent read (CR) snapshot of a block. Free or unused: The buffer is empty because the instance has just started. This state is very similar to the clean state, except that the buffer has not been used. Dirty: The buffer is no longer pinned but the contents (data block) have changed and must be flushed to the disk by DBW n before it can be aged out.
• #37: Oracle Database 11 g : Administration Workshop I 1 - Database Storage Architecture The files that constitute an Oracle database are organized into the following: Control files: Contain data about the database itself (that is, physical database structure information). These files are critical to the database. Without them, you cannot open data files to access the data in the database. Data files: Contain the user or application data of the database, as well as metadata and the data dictionary Online redo log files: Allow for instance recovery of the database. If the database server crashes and does not lose any data files, the instance can recover the database with the information in these files. The following additional files are important to the successful running of the database: Parameter file: Is used to define how the instance is configured when it starts up Password file: Allows sysdba , sysoper , and sysasm to connect remotely to the database and perform administrative tasks Backup files: Are used for database recovery. You typically restore a backup file when a media failure or user error has damaged or deleted the original file. Archived redo log files: Contain an ongoing history of the data changes (redo) that are generated by the instance. Using these files and a backup of the database, you can recover a lost data file. That is, archive logs enable the recovery of restored data files.
• #38: Database Storage Architecture (continued) Trace files: Each server and background process can write to an associated trace file. When an internal error is detected by a process, the process dumps information about the error to its trace file. Some of the information written to a trace file is intended for the database administrator, whereas other information is for Oracle Support Services. Alert log file: These are special trace entries. The alert log of a database is a chronological log of messages and errors. Each instance has one alert log file. Oracle recommends that you review this periodically. Note: Parameter, password, alert, and trace files are covered in other lessons.
• #39: Oracle Database 11 g : Administration Workshop I 1 - Logical and Physical Database Structures The database has logical structures and physical structures. Tablespaces A database is divided into logical storage units called tablespaces , which group related logical structures together. For example, tablespaces commonly group all of an application’s objects to simplify some administrative operations. You may have a tablespace for application data and an additional one for application indexes. Databases, Tablespaces, and Data Files The relationship among databases, tablespaces, and data files is illustrated in the slide. Each database is logically divided into one or more tablespaces. One or more data files are explicitly created for each tablespace to physically store the data of all logical structures in a tablespace. If it is a TEMPORARY tablespace instead of a data file, the tablespace has a temporary file.
• #40: Oracle Database 11 g : Administration Workshop I 1 - Logical and Physical Database Structures (continued) Schemas A schema is a collection of database objects that are owned by a database user. Schema objects are the logical structures that directly refer to the database’s data. Schema objects include such structures as tables, views, sequences, stored procedures, synonyms, indexes, clusters, and database links. In general, schema objects include everything that your application creates in the database. Data Blocks At the finest level of granularity, an Oracle database’s data is stored in data blocks . One data block corresponds to a specific number of bytes of physical database space on the disk. A data block size is specified for each tablespace when it is created. A database uses and allocates free database space in Oracle data blocks. Extents The next level of logical database space is an extent . An extent is a specific number of contiguous data blocks (obtained in a single allocation) that are used to store a specific type of information. Segments The level of logical database storage above an extent is called a segment . A segment is a set of extents that are allocated for a certain logical structure. Different types of segments include: Data segments: Each nonclustered, non-index-organized table has a data segment, with the exception of external tables, global temporary tables, and partitioned tables in which each table has one or more segments. All of the table’s data is stored in the extents of its data segment. For a partitioned table, each partition has a data segment. Each cluster has a data segment. The data of every table in the cluster is stored in the cluster’s data segment. Index segments: Each index has an index segment that stores all of its data. For a partitioned index, each partition has an index segment. Undo segments: One UNDO tablespace is created for each database instance. This tablespace contains numerous undo segments to temporarily store undo information. The information in an undo segment is used to generate read-consistent database information and, during database recovery, to roll back uncommitted transactions for users. Temporary segments: Temporary segments are created by the Oracle database when a SQL statement needs a temporary work area to complete execution. When the statement finishes execution, the temporary segment’s extents are returned to the instance for future use. Specify either a default temporary tablespace for every user, or a default temporary tablespace that is used database-wide. The Oracle database dynamically allocates space. When the existing extents of a segment are full, additional extents are added. Because extents are allocated as needed, the extents of a segment may or may not be contiguous on the disk.
• #41: Oracle Database 11 g : Administration Workshop I 1 - Tablespaces and Data Files A database is divided into tablespaces , which are logical storage units that can be used to group related logical structures. Each database is logically divided into one or more tablespaces. One or more data files are explicitly created for each tablespace to physically store the data of all logical structures in a tablespace. Note: You can also create bigfile tablespaces, which have only one file that is often very large. The file may be any size up to the maximum that the row ID architecture permits. The maximum size is the block size for the tablespace multiplied by 2 36 , or 128 TB for a 32 KB block size. Traditional smallfile tablespaces (which are the default) usually contain multiple data files, but the files cannot be as large. For more information about bigfile tablespaces, see the Oracle Database Administrator’s Guide .
• #42: SYSTEM and SYSAUX Tablespaces Each Oracle database must contain a SYSTEM tablespace and a SYSAUX tablespace, which are automatically created when the database is created. The system default is to create a smallfile tablespace. You can also create bigfile tablespaces, which enable the Oracle database to manage ultralarge files (up to 8 exabytes in size). A tablespace can be online (accessible) or offline (not accessible). The SYSTEM tablespace is always online when the database is open. It stores tables that support the core functionality of the database, such as the data dictionary tables. The SYSAUX tablespace is an auxiliary tablespace to the SYSTEM tablespace. The SYSAUX tablespace stores many database components, and it must be online for the correct functioning of all database components. Note: The SYSAUX tablespace may be offlined to do tablespace recovery, whereas this is not possible for the SYSTEM tablespace. Neither of them may be made read-only.
• #43: Oracle Database 11 g : Administration Workshop I 1 - Segments, Extents, and Blocks Database objects such as tables and indexes are stored as segments in tablespaces. Each segment contains one or more extents. An extent consists of contiguous data blocks, which means that each extent can exist only in one data file. Data blocks are the smallest unit of I/O in the database. When the database requests a set of data blocks from the operating system (OS), the OS maps this to an actual file system or disk block on the storage device. Because of this, you do not need to know the physical address of any of the data in your database. This also means that a data file can be striped or mirrored on several disks. The size of the data block can be set at the time of database creation. The default size of 8 KB is adequate for most databases. If your database supports a data warehouse application that has large tables and indexes, a larger block size may be beneficial. If your database supports a transactional application in which reads and writes are random, specifying a smaller block size may be beneficial. The maximum block size depends on your OS. The minimum Oracle block size is 2 KB; it should rarely (if ever) be used. You can have tablespaces with a nonstandard block size. For details, see the Oracle Database Administrator’s Guide .
• #44: Database Architecture: Summary of Structural Components In this lesson, you learned at a high level about the structural components of the Oracle database: memory, process, and storage structures. The details are covered in the following lessons.
• #45: Oracle Database 11 g : Administration Workshop I 1 -