LubeRight system
- 1. A new amazing product!
- 2. SOFTWARE GREASING NIPPLE WITH TAG (TRANSPONDER) COMMUNICATION AND CHARGING UNIT GREASE METER
- 6. Grease Meter With display showing the volume fed.
- 8. Grease Handling Filling grease from barrel, clean and airless Lubricating with proper equipment
- 9. 1300 1250 1000 650 0 200 400 600 800 1000 1200 1400 KG 1996 1997 1998 1999 A reduction of 50 % of grease used was achieved in the machine hall. In addition spare part costs went down. In 1999 the Grease Meter was used with all manual lubrication. In 1997 MoDo in Ornskoldsvik aquired their first Grease Meter.
- 10. Identification of the greasing point by RFID (Radio-Frequency Identification) • Works in polluted environments • Correct reading distance
- 11. • Name • Group • Lubricant amount • Interval • Lubricant REGISTRATION OF GREASING POINTS
- 12. • THE AMOUNT OF GREASE REQUIRED IS SHOWN ON THE DISPLAY • THE REAL AMOUNT FED INTO THE GREASING POINT WILL BE REGISTRED BY THE METER
- 13. The Performed Lubrication is Transferred from the Meter to the Computer
- 14. • Which points have been lubricated. LubeRight OFFERS TOTAL CONTROL OF EVERY SINGLE GREASING POINT AVAILABLE INFORMATION: • Which points have been forgotten. • How much. • When.
- 15. Digital grease meter with antenna for communication with lubrication nipples. The grease meter has a contact for connection to the power supply and communication unit. Data Max. pressure 70 MPa Grease connection int. ISO-G1/8 Weight 0.8 kg Hose length 400 mm Flow range0-1000 cm³/min. Accuracy +/- 3 % up to 300 bar Protection IP54 Temp. range -20 °C - +40 °C GREASE METER • The grease meter is equipped with a resettable total counter. • It can be calibrated and can show the grease amounts in cm³, g, oz. or fl. oz. • The display of the grease meter is equipped with a backlight for use in dark working environments.
- 16. Communication The unit is connected between the grease meter and the PC when information needs to be transferred. Charging Charging takes approx. 15 hours. Data Supply voltage 100-230 VAC 50-60 Hz Power max 0.25 A Output voltage 5 VDC 2.0 A Protection IP20 Weight 0.8 kg Power Supply and Communication Unit
- 17. • The transponder has a unique number that the grease meter identifies. • Stiffening plate and locking ring in acidproof steel. Lubrication nipple in zinc plated or acid proof steel. • Transponder in epoxy. • Connection thread: ISO-G1/8 or NPT 1/8 • Type of lubrication nipple in accordance with DIN 71412 • Temperature range: -40 °C to +85 °C Lubrication Nipple with Transponder