Madhu_LPD.doc
- 1. Madhusoodanan.V.M A-1/304, Kanchan Pushp, G. B Road, Kasar Vadoli P.O Thane (West) - 400601, Maharashtra, India PP#: K7423948, Exp. Date:12/08/2022, Mob.: +918422955600, +91 9619766375; Email;madhu_623@yahoo.com, vmmadhu@hotmail.com, Skype ID : madhuvm2 Sr. Piping Designer 28+ Years of accomplished experience in detailed engineering and design of Refinery and Oil & Gas Projects, Offshore & Onshore Piping Systems including 20 years in the Middle East Executive Summary ● Seasoned and versatile Mechanical Engineer and Mechanical Draughtsman with a distinguished career of over two decades donning leadership roles predominantly in the areas of Piping Drawings, Piping Layout, Plot Plan, Isometric Drawings, P&ID Drawings, preparing Equipment Layout, and 3D modeling from P & ID, PFD etc ● Thorough knowledge of International and other Engineering Codes & Standards like ANSI, ASME, Shell DEP’s and Saudi Aramco Engineering Standards. ● In-dept understanding of the latest Piping Technology and incorporate revised P&ID modification in consultation with the Civil, Stress, Process and Mechanical Department. ● Professional record demonstrates hands on experience in ✓ I have a total experience (Drawing checking, Designing, Modeling, Drafting) of 28+ yrs. in Offshore & Onshore piping systems. I am capable for Preparation of Plot plan, Equipment Layout, Piping G A DPreparation of equipment nozzle orientation that satisfies all process, utility and instrument requirements, Preparation of Bill of Materials. Preliminary Piping study, 3D modeling on PDMS, Preparation for meets the schedule for Client/Internal model review, Supporting Arrangement according to support standard, Extraction of Isometrics, Extraction of General arrangement. ✓ Involved in designing drawing and 3D modeling of Skid GAD from P&ID and PFD, Such as Separator, Cyclone Separator, Degassing Boot, K O D, Heater Treater, Glycol Dehydration Unit and Routing Process, Utility & Flare lines etc. ✓ Site visit and Tiein feasibility studies ✓ Conduct field survey and reflect “ASBUILT” conditions to existing reference drawing, As built red and green marked drawings after project completion ✓ Plumbing drawing in coordination with the HVAC and Electrical Department ✓ Prepare Fire fighting drawings based on drawings received from NAFFCO ✓ Piping drawings for Manufacturing Chemical Process Instruments, Valves, Level Gauges, Level Switches, Level Transmitters, for Petrochemical Industries ✓ Creating drawings for Tank, Vessels, Nozzle orientation, Chemical Process Instruments, etc. ✓ Team Management: Efficiently Handled & Executed Various projects with a team of 12 Designers and Draftsmen in allocated time. ● Exhibits strong Project Management skills coupled with competencies in mobilizing and judiciously managing resources with structured inputs in the domains of project planning, scheduling and monitoring to ensure project accomplishment within defined time/cost parameters as well as preparing Bills of Materials, etc. ● Computer savvy with extensive experience in working in AutoCAD, , Intergraph Microstation, PDMS & MS office
- 2. Professional Experience and Accomplishments Working as a FREELANCER for an Oil & Gas Company since last ten months. Al husam General Contracting Co., Abu Dhabi, U A E Aug 2011–Jun 2013 (Al Husam Group Of company) Working as a Lead Piping Designer ● Involved in designing and drawing the Piping General arrangement Drawings from P&ID, PFD and layout, Review preparation and updating of Plot Plans/Equipments GA’s/Piping GA’s/Isometries, Nozzle orientation and Supports, Bill of Materials, etc. ● Prepared Shop drawing for construction based on Tender projects and IFC drawings as per site condition and modified the drawing as per comments from Consultants /Clients/ Project Engineers. ● Preparing As-built drawings after the completion of Projects ● Team Management: Efficiently Handled & Executed Various projects with a team of 12 Designers and Draftsmen in allocated time. Gastech Process Engineering (India) Pvt. Ltd., Fraidabad Dec 2008–June 2011 (100% Subsidiary by Gastech Engineering Corporation, U S A) Sr. Drafting Engineer ● Involved in designing drawing and 3D modeling of Skid GAD from P&ID and PFD, Such as Separator, Cyclone Separator, Degassing Boot, K O D, Heater Treater, Glycol Dehydration Unit and Routing - Process, Utility & Flare lines etc. ● Preparing plot plan, conducting preliminary piping study, equipment layout, preparation of general arrangement drawings, supporting arrangement, preparation of isometrics and Bill of Materials. ● Preparing Special Piping Supports for Oil & Gas related equipment such as Separator, Degassing Boot, K O D, Heater treater etc., for Offshore and Onshore. Electrowatt Engineering, Al-Hamarya, Oman Oct 2007 – Oct 2008 Senior Piping Designer ● Involved in designing and drawing the Piping General arrangement Drawings from PEFS (P&ID) and layout, Review preparation and updating of Plot Plans/Equipments GA’s/Piping GA’s/Isometries, Nozzle orientation and Supports, Bill of Materials, etc. Arabian Industries LLC, Sohar Industrial Area, Sultanate of Oman Mar 2007 – Sept 2007 Senior Piping Designer ● Associated with the Design Unit and involved in designing isometric & spool drawings for Plant related project for Sohar Refinery Company (SRC), Oman Methanol Company (OMC), Sohar International Urea & Chemical Industries (SIUCI), etc. ● Verified the drawings of isometric/ spool/ general arrangement/ piping layout/ plot plan and equipment layout and co-ordinated with the Designers & Draftsman. Consolidated Contractors Company (CCC), Manama, Kingdom of Bahrain Apr 2005 – Apr 2006 Senior Designer ● Involved in the construction of a new plant for Low Sulphur Diesel Production Plant (LSDPP) for Bahrain Petroleum Company (BAPCO) & The Consultant Japan Gas Corporation (JGC). ● Collaborated with the Engineering Group, generated isometric drawings from IDF file through spoolgen and Taliso, and detailed isometric and spool drawings. Bilt Middle East, Dubai UAE Oct 2004 – Mar 2005
- 3. Senior Designer ● Prepared Shop drawing for construction based on Tender and Design drawings as per site condition and modified the drawing as per comments from Consultants / Project Engineers. ● Coordinated Plumbing drawing with HVAC and Electrical Section for revision based on site condition. ● Prepared Fire fighting drawings based on drawings received from NAFFCO. ● Developed as-built drawing for final submission using AutoCAD 2005 for submitting to the Consultant/Client. Al Huda Engineering Works, Doha-Qatar Dec 2001 – Jun 2004 Designer/ CAD Draughtsman ● Prepared shop drawings from the construction drawings and obtained approval from proponent consultant, including MEP drawings. ● Prepared As-built drawings using AutoCAD 2000, 2002 & 2004 after the completion of projects – Khalifa Stadium, Sports Academy and Associated Sports Leisure Facilities Aramco (Saudi Arabian Oil Company), Kingdom of Saudi Arabia Jan 1993 – Jun 2001 Piping Designer/ CADD Operator ● Associated with the Northern Area Producing Engineering Department / Saudi Aramco and involved in recording Job Log Engineering Work Orders (EWO) related to projects, originated by the proponent organizations. ● Gathered relevant reference drawing from Technical Library and Saudi Aramco Drawing Management System. ● Visited project regularly and involved in Tie-in feasibility studies. ● Cadding and updating of Equipment GA’s / Piping GA’s / Isometrics, supports, Bill of Materials. ● Worked with Saudi Aramco Drawing Management System and coordinated with the Network Administrator for Drawing Submittal & Cancellation, Issue revision numbers/ transferring electronic files and scanning certified drawings and Mylar drawings for DMS. ● Conducted field survey and reflected “AS-BUILT” conditions to existing reference drawing vectoring and edited Raster drawing such PIDs, ILDs, PFDs, VoDs etc. to Saudi Aramco CADD System using Intergraph Microstation and I/RAS B software and Material selection including stock numbers. Earlier Experience Chemtrols Eng. Pvt. Ltd., Mumbai, India 1983 – 1992 Senior Mechanical Draughtsman Everest Chemical Industries, Mumbai, India 1981 – 1983 Draftsman Academic and Professional Credentials Mechanical Draughtsman 1979 State University, Mumbai, India Diploma in Mechanical Engineer 1983 State University, Mumbai, India Graduate Diploma in Mechanical Engineer 2005-2007 Imperial international Institute Of Management & Technology, Delhi, India Certification Certification in Computer Aided Design & Drafting (AutoCAD) Training
- 4. Training Course on INTERGRAPH/ MICROSTATION from Saudi Aramco, K.S.A Training Course on PDMS Version 11.6 from AVEVA, India References & Supporting Documents Available upon Request