Make your window more attractive
Download as PPT, PDF1 like182 views
This document provides steps for replacing windows and window screens. It outlines measuring the window, removing the old window by taking out screws and cutting caulking, lifting out the old window and installing the new window using shims and new screws. For screens, it describes removing the old screen and spline, installing a new spline if needed, rolling the new screen into the frame and securing it into place along the edges. It recommends hiring professionals for window replacements through provided website links.
Make your window more attractive
- 1. Make Your Window More Attractive
- 2. Want to know latest window replacement ideas?
- 3. Here you will get answer of all these Questions You will know – How to replace your window? And How to add or replace screen to enhance its beauty?
- 4. Steps to replace window • First consider height and width for the new replacement • Measure form the top to the bottom of the sill. • Removing a window is tough task, take all visible screws out. • Use screw driver to remove screws and utility knife to cut all the caulking around the outside.
- 5. • Remove all the old caulking and ensure to make your window free of all caulking. • Lift and place the window at the right place. • Have one other person inside to hold the window and place the shims. • Place your window at the right level.
- 6. •Use new screws that come with new window to keep them in place. •Check everything once again to be sure that window is levelled and in square shape. •Use spray to fill in all the cracks of house wall near window, you can also use silicone around the whole outer frame. This will seal it up tight.
- 7. Steps to replace Window Screens •If possible take the windows frame down and keep it on a flat surface •Remove the old screen from the window frame using screwdriver. •Pry each spline or rubber seal out from frame. •Look carefully every corner of the frame for a spline end. If you find any, pry it up with screwdriver.
- 8. •Pull out the entire spline form the window frame. •Carefully check holes or cracks in the rubber spline. Replace the damaged one with new spline. •Roll the new screen over the top of the frame. •Check the size of new screen and if it is larger than frame then cut it and make only one inch larger on all sides.
- 9. •Install the new screen and with spline tool force the spline and screen down into the window groove. •Secure the first side of screen in one corner of the frame and pull the remaining screen tight with one hand. •Use another hand to continue to the next side of the window. •Before you continue to the down the straight the sections, use screwdriver to push the spline and screen down into the window frame groove at the corners. •Cut/ remove extra screening from the spline groove using a utility knife.
- 10. Is that easy? You can follow the given steps to replace your windows or screens, but if you are looking for the perfect and professional help—
- 11. http://www.remodelpros.com/ Choose from various available options Current windows trends and replacement ideas Understand and learn more about windows replacement Quick and professional service, just one call away