Markstrat web participant-handbook-chap 1 a 3

PARTICIPANT HANDBOOK

Jean-Claude Larréché
The Alfred H. Heineken Chaired Professor of Marketing
INSEAD

Hubert Gatignon
The Claude Janssen Chaired Professor of Business Administration and Professor of Marketing
INSEAD

Rémi Triolet
Simulation Expert
StratX

How you can save paper.
Please refer to page 2 before printing this document.

Copyright © StratX 2011-09-21 i

TABLE OF CONTENT
I. Introduction to the Markstrat Challenge ________________________________________________ 1
1. Understand your role ________________________________________________________________________________ 1
2. Your objective ______________________________________________________________________________________ 1
3. Your team _________________________________________________________________________________________ 1
4. Getting prepared ___________________________________________________________________________________ 2
5. How to print the PDF version of this handbook ___________________________________________________________ 2
6. Questions & Technical Support ________________________________________________________________________ 3
II. Overview of the Markstrat World ______________________________________________________ 4
1. Sonite Products _____________________________________________________________________________________ 4
2. Vodite Products ____________________________________________________________________________________ 5
3. Naming Conventions ________________________________________________________________________________ 6
4. Sonite Customers ___________________________________________________________________________________ 6
5. Vodite Customers ___________________________________________________________________________________ 7
6. Distribution Channels ________________________________________________________________________________ 7
7. Economic Environment ______________________________________________________________________________ 8
III. Managing Your Firm _________________________________________________________________ 9
1. Decision rounds ____________________________________________________________________________________ 9
2. Product, Brand and Base Project _______________________________________________________________________ 9
3. Production ________________________________________________________________________________________ 10
4. Pricing ___________________________________________________________________________________________ 11
5. Advertising _______________________________________________________________________________________ 11
6. Commercial Team __________________________________________________________________________________ 12
7. Market Research Studies ____________________________________________________________________________ 13
8. Research & Development ___________________________________________________________________________ 13
9. Productivity Gains__________________________________________________________________________________ 15
10. Marketing as a Profit Center _________________________________________________________________________ 16

Copyright © StratX 2011-09-21 ii

TABLE OF FIGURES
Figure 1 – How to print two pages per sheet __________________________________________________ 3
Figure 2 – Sonite main physical characteristics ________________________________________________ 5
Figure 3 – Vodite main physical characteristics ________________________________________________ 6
Figure 4 – Inventory and production plan versus market demand ________________________________ 10
Figure 5 – From retail price to unit contribution ______________________________________________ 11
Figure 6 – Available market research studies_________________________________________________ 13
Figure 7 – Productivity gains _____________________________________________________________ 16

Copyright © StratX 2011-09-21 iii

I. INTRODUCTION TO THE MARKSTRAT
CHALLENGE
Welcome to Markstrat and congratulations for your new position!
You and the other members of your team have just been recruited by a large corporation to manage the
marketing department of one of its divisions. Coming from a different industry, your team has no
experience in the Markstrat world. You will compete with several other firms to market two types of
durable goods to consumers.

1. Understand your role
During this exercise, you will be responsible for formulating and implementing the long-term marketing
strategy of your division. In particular, you and your team members will have to:
 Work in a highly competitive market;
 Target selected consumer segments and position your products;
 Interface with the R&D department to design and develop new products;
 Prepare the launch of new products, improve, maintain or withdraw existing ones;
 Interface with the production department to specify production planning;
 Make marketing mix decisions (pricing, advertising, …) for each of your brands;
 Decide on the size and priorities of your commercial team;
 Order market research studies to get up-to-date information for decision making.

2. Your objective
Your objective over the next years is to maximize the Share Price Index of the fictitious company that you
will be managing. This measure takes into account several indicators including net contribution generated,
product market share, your ability to grow the organization’s revenues and the quality of projects
successfully completed.

3. Your team
An important aspect of the Markstrat Challenge is that you will be part of a team. It is helpful to establish a
good working relationship with your teammates and to organize your work with them. Here are a number
of questions to take into consideration.
 Will you work non-stop on your Markstrat exercise for 3 hours from start to finish? Or will you spread
your work over several days?
 Will all team members meet when they make decisions? Or are you geographically dispersed?
 Will all team members be involved in all decisions? Or will you assign responsibilities (R&D? Production,
Finances …) to team members, each making decisions on his or her own?
Regarding the last point, try to avoid letting each member concentrate solely on his/her area of
professional expertise. Initially, it is strongly recommended that each team member be involved in all
discussions in order for everyone to have the same understanding of the business situation. As the
simulation evolves, your team will develop a common understanding of the strategic issues. In parallel, the
management of the organization will become increasingly complex. At some point, the members of the
team can begin focusing on a specific area of responsibility.
By following this process, not only will you maximize your internal resources, but also ensure that everyone
benefits equally from the Markstrat experience.

Copyright © StratX 2011-09-21 1

4. Getting prepared
Preparation activities include reading the handbook and trying out the Markstrat software with the Practice
industry.
A. Pre-Reading
It is highly recommended to read carefully this hanbook prior to the beginning of the Markstrat Challenge.
If you do not do it, you may put your team at a disadvantage.
Unless otherwise instructed by your professor, you should read the following four chapters prior to
Decision Round 1:
 Introduction to the Markstrat Challenge
 Overview of the Markstrat World
 Managing Your Firm
 Error! Reference source not found.
In these four chapters, you will discover: what your new challenge and objective are; what the Markstrat
world looks like in term of products, consumers, distribution channels, competitors, etc…; how your
company operates and what decisions you wil have to make in order to run it through the next 5 to 10
years; what information will be made available to you in your annula report.
You are then advised to read the last two chapters prior to Decision Round 2:
There, you will learn in more details: how to use the semantic scales and the multidimensional studies to
reposition brands; how and when to reposition brands or to launch new ones; how the R&D and Marketing
departments work together.
B. Practicing Markstrat
Unless otherwise instructed by your professor, you are invited to try Markstrat Web out with the PRACTICE
data. You will thus be able to test your knowledge of the Markstrat environment. All registered users have
access to the PRACTICE data. Refer to the previous section for instructions on how to access them. The
PRACTICE data have been obtained during a past Markstrat course, with real students making the
decisions. You will be allowed to browse through all charts and graphs and to make decisions. However,
you will not be able to check the results of your decisions as the PRACTICE data cannot be run through the
Markstrat mathematical model.

5. How to print the PDF version of this handbook
Paper is too valuable to waste. We advise you to think twice before printing this handbook. The full text is
available within the simulation, with a search-engine to help you find the information you need. In
addition, context-sensitive help is available on all important forms, such as decision forms.
Should you decide to print this handbook, we advise you to print two pages per sheet, and, if your printer
allows it, to print double-sided.
Figure 1 shows how to print two pages per sheet. Select “Multiple pages per sheet” in the “Page scaling”
choice box, and enter 2 in the cell below.
To print double-sided, please refer to your printer documentation.


Figure 1 – How to print two pages per sheet

6. Questions & Technical Support
We have done our best to make this guide as clear and complete as possible. But the Markstrat simulation
is fairly complex and we know from experience that some topics will require additional
explanation.
If you have questions regarding this handbook or the simulation we suggest that you review
the Frequently Asked Questions (FAQ’s), accessible from the question mark icon located in the
left-hand bar. Other participants may have already asked similar questions and a response
may be available in the FAQ’s. Save time by checking the site first.
Responses to frequently asked questions do not address specific team situations and do not provide advice
or hints on strategy, management, marketing, finances or any other topic. For these subjects, you should
only count on your knowledge and your experience.


II. OVERVIEW OF THE MARKSTRAT WORLD
The Markstrat world is a fictitious industrialized country of 495 million inhabitants whose monetary unit is
the Markstrat dollar ($). This world does not intend to represent any particular country, market or
industrial sector. However, it roughly behaves like most markets, and the general management and
marketing knowledge that you have acquired through business experience or formal education applies to
this new world.
In the Markstrat world, both inflation and GNP growth are fairly stable, and no major political, social or
economic event is anticipated in the near future. There are a handful of competing companies that
manufacture and market consumer durable goods. These goods are comparable to electronic products
such as digital cameras, GPS systems, mobile phones or computers, as well as office equipment, cars,
books, or any other consumer durable goods.
Initially, the competing companies are identified by a unique letter such as L, M, N, R, S or T. Your first task
will be to give a name to your company, starting with this letter and reflecting the spirit within your team.
In most cases, each firm starts in a different situation in terms of product specification, target consumers,
brand awareness levels, market share, distribution coverage, profitability, R&D expertise, etc.
Consequently, the marketing strategy of each firm should be adapted to its particular situation within the
industry. However, Markstrat can be configured so that all firms start in the exact same situation. Your
instructor will let you know if you are using one of these competition configurations.
Nevertheless, no firm has a relative advantage over the others and initially many characteristics are
common to all firms. For instance, the initial brand portfolio of all companies is comprised of two brands.
As mentioned before, each firm will have the opportunity to design and develop new R&D projects and to
introduce new products or upgrade existing ones. All R&D departments have the same capabilities to
develop new projects, in their range of experience. Similarly, all commercial teams are equally qualified to
handle distributor relationships.

1. Sonite Products
At the beginning of the simulation, all rival firms market two Sonite brands. Sonite products have existed
for several years and the market has grown quite consistently since the introduction of the first Sonite
brand. It is now a well-established market, with several strong brands at different price points covering a
wide range of needs. Analysts believe that the Sonite market will continue to grow over the next five years.
A Sonite is a complex piece of equipment made up of several components. Although they can be evaluated
along more than fifty attributes, Sonite brands are primarily differentiated in terms of five physical
characteristics that are considered as the most important ones by industry experts. These characteristics
are described below and additional details are given in Figure 2
 Processing Power. This characteristic measures the speed of the internal processor. High processing
power is critical for applications using extensive graphics or doing a lot of calculations. It also drives the
ability of the sonite product to process multiple tasks simultaneously. Processing power is given in
gigaflops (billion of floating point operations per second), a standard and respected measure that takes
several factors into account: number of “cores”, internal memory size, frequency, etc.
 Display Size. This is the size of the screen, in inches. This characteristic drives the ability of the sonite
product to display higher quality images or videos, or to display more information to the user at a given
time.
 Design Index. This characteristic does not relate to the product esthetic but to the type of raw
materials used (wood, plastic, metal ...), to the number of components (all-in-one type versus multiple-
component type), to the aspect of its various components (position, size, …). Therefore, a product rated
8 on the design scale is not better or easier-to-use than one rated 4 on the same scale.
 Battery Life. This is the number of hours during which the sonite product can operate without being
connected to the main power.


 Features. This is the total number of features offered by the sonite product. These features can be
hardware related, such as the ability to connect various devices to your sonite product, or software
related. There are a minimum number of core features that each sonite product must offer. Additional
ones are nice-to-have that may be of interest to some consumers.
It is important to understand that offering more of a certain characteristic is not necessarily better. For
instance, high processing power processors may require a sophisticated cooling system that has an impact
of weight, volume and noise. Consumers who do not need high power will certainly choose a less powerful
sonite that will be small, light and quiet. Similarly, large screens may be highly attractive to some users, but
not to others because of their higher weight and heavier power consumption. Similar advantages and
drawbacks exist for most characteristics: long duration batteries are bulky and heavy; product with lots of
features may be difficult to use and may confuse new or occasional users; etc.
The base cost is also an important factor; this is the cost at which each unit will be produced, based on an
initial production batch of 100,000 units. The base cost is decided jointly by the Marketing department –
which is mainly concerned by margin and profitability– and by the R&D department –which is mainly
concerned with product feasibility.

Characteristic Abbreviation Unit Range
Processing Power Power Gigaflops (GFLOPS) 5 – 100
Display Size Display Inches (“) 4 – 40
Design Design Index 3 – 10
Battery Life Battery Hours (H) 24 – 96
Number of Features Features Number (#) 5 – 20
Base Unit Cost Base Cost $ 30+
Figure 2 – Sonite main physical characteristics

2. Vodite Products
Recently, there has been industry speculation that a new type of electronic product might emerge, the
Vodite. Although no Vodite brands are available at the start of the simulation, industry experts have a
pretty good idea of what future Vodite products might resemble.
Vodite products will satisfy entirely different needs from that of Sonite products so that demand for the
two products will be completely independent. They will not be complementary in any way and there will
not be any substitution from one to the other. It is anticipated that the Vodite market will be quite
attractive if the right products were made available at the right price
The expertise required of potential suppliers is similar for both markets in terms of technology,
manufacturing, marketing and distribution. Therefore, your division and your competitors are the most
likely suppliers of Vodites. Although the Sonite and Vodite technologies are similar, all firms will have to
engage substantial R&D resources to develop their first Vodite product. Recent calculations suggest that an
investment of about 10 million dollars may be required for each Vodite.
Experts agree that Vodite products will primarily be differentiated in terms of their five most important
physical characteristics. These are described below and additional details are given in Figure 3.
 Resolution. This characteristic relate to the sharpness or clarity of the images processed by the vodite
product. A higher level of details can be observed and processed with high resolution products.
Resolution should not be confused with definition, which is the total size of the image. Resolution is
usually expressed in lines per millimeter (LPM), from 20 to 100.
 Energy Efficiency. This characteristic, sometimes called efficient energy use, is about using less energy
to provide the same level of performance and convenience. The higher the energy efficiency the less
electricity is used. Energy efficiency is usually improved with more efficient technologies, such as


smaller gates and lower frequency in microcircuits. This characteristic is measured in billion
computations per watt-hour (bC/Wh).
 Carbon Footprint. This characteristic is also called referred to as greenhouse gas emission. It weights
the carbon impact of the product through its lifecycle: manufacturing, transportation, use, recycling
and/or discarding. It is measured in kilograms of CO2 released in the atmosphere.
 Connectivity. This characteristic measures the ability of the product to connect to varying networks
and/or databases, as well as the speed of the connection. Connectivity is measured by an index
between 3 and 10. Higher connectivity indices guarantee that the product will be able to connect to a
network in almost any situation, and to exchange data at a fast pace.
 Application programs or Apps. This is the number of application programs that can be setup and used
with the vodite product. Applications allow user to customize the product and to adapt it to their own
needs. Although there are only a handful of basic applications that each vodite product must offer,
some products offer a very large catalog.

Characteristic Abbreviation Unit Range
Resolution Resolution Lines per Millimeter (L/mm) 20 – 100
Energy billion computations per
Energy Efficiency 10 – 100
watt-hour (bC/Wh)
Carbon Footprint Carbon Kilogram (Kg) 5 – 50
Connectivity Connect Index 3 – 10
Application Programs Apps Number (#) 5 – 100
Base Unit Cost Base Cost $ 30+
Figure 3 – Vodite main physical characteristics

3. Naming Conventions
In Markstrat brand names are made up of up to six characters. The first letter identifies the firm marketing
the brand (M, R, S, T, L or N). The second letter must be an 'O' for a Sonite or an 'E' for a Vodite. The other
characters can be letters or numbers, and can be freely chosen by each firm to generate different brand
names.
For instance, brands TONE and TOPS would be Sonites marketed by firm TIGERS, while MEGA and MEMO
would be vodites marketed by company MARMOTS. All new brands must follow these conventions, and
must have different names. The selected name has no influence on the market response to the brand.

4. Sonite Customers
Sonite customers are adults who purchase the products for personal or professional use. Market research
studies show that the Sonite market can be divided into five major groups of customers or segments,
having similar needs and purchasing behavior.
 Explorers (Ex) – People in this segment show a high level of interest in Sonites and other similar
products. They are extremely knowledgeable about Sonite technology and the different characteristics
of the existing brands. Explorers were probably among the first to use Sonite products. They demand
high-performance products, i.e. products with high processing power and/or large screens. They are
less concerned by the convenience of the products (battery life, design or number of features).
However, they are quite price-sensitive, since they use Sonite products for their personal use and do
not necessarily have high incomes.
 Shoppers (Sh) – As the name of this segment indicates, Shoppers are doing a lot of shopping. They have
a good knowledge of marketed brands and are doing extensive product comparison. They are looking
for products with a high quality –price ratio and average levels of both performance and convenience.
Like Explorers, they use Sonite products for personal purposes and are quite price-sensitive.


 Professionals (Pr) – Individuals in this segment may use Sonite products for both personal and
professional reasons. As a consequence, they are looking for high quality, high-performance and easy-
to-use products. They can afford expensive products and often view price as an indication of quality.
 High Earners (Hi) – This group is characterized by their high incomes, using Sonite products on a private
basis. Studies show that they usually buy fairly expensive products, which they can afford, and that
their purchase is partially motivated by social status. Although they tend to use their Sonites less than
the average consumer, they demand performance and convenience from the products.
 Savers (Sa) – This segment includes all consumers who are cautious in the way they spend their money.
Although this segment is the largest and is composed of several sub-groups, most customers have
similar needs. They are looking for cheap, low-performance products with average convenience.
Experts believe that the penetration of this segment is not as high as the other segments. As a
consequence, its future growth rate could exceed forecasts.
Each segment has specific needs in terms of physical characteristics and price. Awareness levels and
purchase intentions vary significantly for existing products from one group to the other. Market forecast
studies show that the sizes and growth rates of the five segments are significantly different. This is
explained in part by the development stage of each segment, by the varying product offerings, and by the
intensity of marketing effort targeted at each segment.

5. Vodite Customers
While potential consumers for Vodites are the same individuals as those who buy Sonites, a different
segmentation strategy is likely to be appropriate for Vodites. Further studies need to be completed, but
marketing experts believe that it will be more effective to group consumers according to how they adopt
new products. In this light, three groups are examined for Vodites:
 Innovators (In) – These consumers will be the first users of Vodite products. People in this segment
tend to be adventurous and are willing to try new ideas at some risk. Although this segment will
probably be the largest one in the early days, it represents only a small percentage of total potential
consumers. They demonstrate both a high desire and interest for Vodite products and their income
levels are above average.
 Early adopters (Ad) – Consumers in this segment will not adopt Vodite products as quickly as
innovators but will certainly do so before a majority of people have accepted the new technology. As
this group is usually much larger than the previous one, its influence on other consumers is fairly high.
Early adopters tend to be opinion leaders and helpful in 'advertising' the new product to other
potential buyers. They are critical to the adoption process, and should not be neglected by marketers.
They have an average income level.
 Followers (Fo) - These individuals represent the bulk of potential consumers. Because they perceive
more risk in buying new products, they adopt a product innovation only after a large number of
consumers have tried it. Innovators and early adopters particularly influence followers. Their income
level is usually below average.

6. Distribution Channels
Sonite and Vodite consumers tend to shop in the following three distribution channels:
 Specialty stores – These stores are usually small and may not necessary belong to organized chains.
They are geographically close to their customers and can provide a high level of service and technical
support. As they do not distribute many different product categories, Sonite products account for a
large proportion of their sales. These stores usually carry a broad product line for each category,
including the most expensive and/or high-performance products. Because of their high level of
technological expertise, specialty stores are likely to be the preferred distribution channel for Vodite
products.
 Mass Merchandisers – These stores operate on a low-price, high-volume basis and try to minimize
overheads. As a consequence, the level of service offered is lower than that of the two other channels.
While mass merchandisers carry many different product categories, the depth of each product line is


usually restricted to a few units. They often distribute the cheaper, low-performance products. Their
lack of technical expertise and the low level of service may well prevent them from distributing Vodites
in the early years.
 Online stores – This category of stores includes the web-only merchants (such as amazon.com,
newegg.com, …) as well as the e-commerce websites of traditional retailers (BestBuy.com,
Wallmart.com, …). Although only a small percentage of consumer electronic sales are done on the web,
this percentage is much higher for Sonites products, especially for highly connected consumers such as
Shoppers. Convenience is the key advantage of online stores as consumers may shop from their home
at the time of their choice. In addition, they have access to an almost unlimited choice and can
compare features and prices very easily. Privacy and security are the primary concerns of online
shoppers, but new mechanisms are put in place by banks and e-commerce sites so as to reduce fraud.
Online stores are likely to become more important in the next 5 to 10 years.
Within the Sonite market, market research studies show that all three distribution channels are important;
therefore each of them should be visited by the companies’ sales forces. There are approximately 30,000
specialty stores, 10,000 mass merchandisers belonging to 8 different chains, and 1,000 online stores.
Differences between margins obtained by the stores in each of the three channels are mainly due to
differences in the level of service and volume sold. These margins are applied to retail prices and are
approximately constant across brands for a given channel. In Markstrat the distributor margins are 40% for
specialty stores and 30% for the other ones.

7. Economic Environment
You operate in an economy that currently has an average inflation rate of 2%. Inflation affects the
production, advertising, commercial and market research costs of your company. It is unlikely that inflation
will reach much higher levels in the future. Should this be the case, the government may decide to impose
price control on all brands.
The Gross National Product (GNP) provides you with information about trends in the Markstrat economy.
In the recent past, the overall economy has been growing as a rate of 4%.


III. MANAGING YOUR FIRM
The Marketing department that you and your team will be working for is responsible for the design and
implementation of the marketing strategy of your division. You will have to decide the overall direction of
the company regarding:
 The product portfolio strategy – which brands the company will develop and market;
 The segmentation and positioning strategy – which market segments will be targeted and how
products will be positioned;
 The marketing mix strategy – the day-to-day operational marketing decisions such as pricing,
production, communication and distribution.
Your performance will be measured by several indicators such as net contribution generated, brand market
shares, your ability to grow the firms’ revenues, quality of R&D projects successfully completed, etc. Finally,
the best measure of your company's success will be its stock price index, a measure that takes all of the
above indicators into account.
This chapter describes how your company operates as well as the decisions you will have to make each
period. Before making dramatic changes, you should try to get a feel for the behavior of the market. Do not
jump hastily to conclusions and bear in mind that obvious solutions may be based upon an incomplete
analysis. To reach more robust decisions, use the information from your company report, from the
newsletter and from market research studies to analyze your situation and past competitive behavior.
These reports are described in the chapter entitled Error! Reference source not found..
You will manage the Marketing department as a profit center. We will see in the next paragraphs that most
of your decisions will cost you money: advertising budgets, commercial team expenditures, R&D expenses,
etc. We will recap all of these costs at the end of the chapter and we will explain where your money comes
from.

1. Decision rounds
You will follow a decision-making cycle that will repeat itself for each simulated year, for instance 8 years in
total. This cycle is called a decision round or a round. A simulated year is also called a period.
1. At the beginning of each round, the instructor will provide you with your results for the previous year
(sales, R&D, production, …) together with additional information on the market and your competitors.
In the first year, you and your team should begin analyzing this information and then start formulating
a strategy for your company and agree on objectives. In the subsequent years, you should appraise
your results, check if you have met your objectives and possibly review your initial strategy and decide
on what changes should or should not be made.
2. The previous step will lead to a series of decisions, which will be input into the decision forms provided.
Decisions can be modified and refined throughout the decision round, until the time is over.
3. At the end of the round, the instructor collects and audits the decisions of all teams. If everything looks
fine, the instructor runs the Markstrat mathematical model to simulate the round and produce new
results. At this stage, you are ready to start a new round.

2. Product, Brand and Base Project
Each of your Sonite and Vodite product is sold to consumers under a brand name such as MOST, ROCK,
SEEK or NEXT. The physical characteristics and the unit production cost of the product are defined by its
base R&D project, i.e. the project that was conducted by your R&D department to develop the first
prototype of the product. R&D projects are given a name when they are initiated; project names start with
the letter ‘P’.
Initially, each firm markets two sonite products, for instance MOST and MOVE, each one being
characterized by its base project, for instance PMOST and PMOVE.


Over the course of the simulation, you will have to upgrade your existing brands to adpat to changing
consumer needs or to competitive moves. You may also have to launch new brands to target new
consumer segments or to explore new markets. The chapter Error! Reference source not found. provides
you with more information on situations where brand upgrades or brand launches are necessary.

3. Production
Each period, you must submit a production plan for each of your marketed brands, i.e. you must specify
how many units you want to produce for the period. This decision must take into account the potential
sales for the brand, the existing inventory at the beginning of the period and the flexibility of the
Production department.
The Production department of your company is working for several divisions. It can thus be viewed as a
highly flexible external supplier. As a consequence, you are not concerned about manufacturing
investments, fixed costs or capacity utilization.
From one period to the next, you are completely free to increase or decrease the production plan of a given
product, without any penalty. The Production department will always manufacture the required quantities
in the best possible conditions.
Moreover, the actual production level for each product is automatically adjusted in response to actual
demand for that product in the period, within plus or minus 20% of the production plan submitted by
Marketing. Hence, if you did not order enough units to cover the demand, the production will be
automatically increased by up to 20%. On the contrary, if you ordered too many units and cannot sell them
in the period, the production will be automatically reduced by up to 20%. In case your production plan was
inaccurate by more than 20%, then you will either lose sales or build inventory.
Figure 4 gives a few examples for varying situations of inventory, production plan and market demand (all
numbers are in units).
Case A Case B Case C Case D
Potential sales (a) 154 000 154 000 154 000 154 000
Beginning inventory (b) 20 000 20 000 20 000 None
Production plan
(c) 150 000 100 000 200 000 200 000
(your decision)
134 000 120 000 160 000 160 000
Actual production
(d) Reduced to Increased to Reduced to Reduced to
(automatic adjustment)
(a) - (b) (c) + 20% (c) - 20% (c) - 20%
154 000 140 000 154 000 154 000
Actual sales (e)
= (a) = (d) + (b) = (d) + (b) = (a) = (a)
Lost sales
(f) None 14 000 None None
Equal to (a) – (e)
Ending inventory
(g) None None 26 000 6 000
Equal to (b) + (d) – (e)
Figure 4 – Inventory and production plan versus market demand

The flexibility of the Production department goes beyond automatic adjustment of production plans. The
units produced are charged to the Marketing department only when they are shipped to distributors to be
sold to consumers. The price paid by Marketing to Production is called the transfer cost; it incorporates all
costs associated with this high level of flexibility, including depreciation and fixed costs.
The transfer cost of a product is initially equal to the base cost of its base project, i.e. the unit cost decided
when the project was developed by R&D. It will then increase with inflation and decrease over time
because of experience effects and economies of scale. As a rule of thumb, you can expect the transfer cost
to be reduced by about 15% each time the cumulative production of a given product is doubled.
Units produced in excess are kept in inventory, and inventory-holding costs are charged to the Marketing
department until these units are sold. Inventory costs per unit are calculated as a percentage of the
transfer cost, this information can be found in the Newsletter.


Production plans must be entered each period in the Marketing Mix decision form. These decisions should
be based on your sales forecasts for the upcoming period, and should take into account any units left in
inventory. If you are holding a high level of inventory, you can set the production plan to 0; but in this case,
no automatic adjustment is possible.

4. Pricing
Each period, you must set the recommended retail price for each of your marketed brand. The retail price is
the list price for customers. The average selling price is the price at which you sell your product to
distributors. It varies by distribution channel since different margins hold in each of the three channels, as
explained in the Distribution Channels section.
Specialty stores tend to respect the recommended retail prices set by companies. However, mass
merchandisers and online stores use promotions or special offers to sell products. On average, these
promotions are equivalent to a discount rate of 10% off the list price for mass merchandisers and 5% for
online stores. Figure 5 provides a summary of prices, margins and discounts for a recommended Retail
Price of $400.
Dumping is strictly forbidden in the Markstrat world; therefore the recommended retail price must be set
so that the selling price of a product is higher than its transfer cost, in all channels.
Prices must be entered each period in the Marketing Mix decision form. Price increases or decreases
greater than 30% in one period are highly discouraged as they often result in negative market reactions. On
one hand, an excessive price increase is usually not accepted by consumers who may react strongly and
stop purchasing the brand. On the other hand, an excessive price decrease will result in a proportional cut
in the distributors’ margin, and your commercial team may have a hard time finding distributors for the
brand. A message will warn you when such decisions are made. If you ignore the warning, the
recommended retail price will be automatically adjusted up or down to stop such adverse reactions.

Specialty Stores Mass Merchandisers Online Stores
Actual retail price $400 $360 $380
Distribution margin 40% − $160 30% − $108 30% − $114
Selling price $240 $252 $266
Transfer cost $123 $123 $123
Unit gross $117 $129 $143
contribution
Figure 5 – From retail price to unit contribution

5. Advertising
Advertising decisions must be made each period for each of your marketed brands. Indeed, the practice in
the Markstrat world is to advertise on brands rather than on company names. As a consequence, even if
your firm markets several brands, possibly to the same consumer segment, these brands will not benefit
from the company’s identity and image.
The primary objective of advertising is to build awareness for brand names and to make consumer familiar
with the characteristics and price of your product. Advertising is crucial for new brands, but is also
important for brands that have been on the market for some years. Indeed, consumers tend to forget
about a brand in the absence of advertising.
Another objective of advertising is to develop demand for the whole market. Indeed, as potential
consumers become more familiar with the products and their characteristics, they are more likely to
purchase one of them. The size and growth rate of consumer segments is influenced by the amount spent
in advertising by the entire industry.


Finally, advertising will influence the decision of distributors to carry or not your products. Spending more
in advertising will most likely increase your distribution coverage. It also created a barrier to entry to your
competitors.
The absolute amount of advertising spent on your brands is a key factor for the success for your campaign.
But because of the competitive nature of the Markstrat industry, your advertising share of voice is another
crucial factor. The share of voice is calculated by dividing your own advertising budget, usually several
million dollars for a given brand and period, by the industry average advertising budget. Thus, a share of
voice equal to 1 means that you spend as much as your average competitors. A share of voice greater than
1 is required for a successful new brand launch.
There are two separate advertising budgets: advertising media and advertising research. As its name
indicates, the advertising media budget is used to purchase media space and time. Advertising research is
about the creative work, media selection, or other activities conducted by advertising agencies, that
improve the quality and the persuasive power of your message.
If your objective is to increase or maintain awareness, you should spend the bulk of your total advertising in
media space purchase; and only a small percentage in advertising research to make your advertising more
effective, for instance 4% to 8%. If your objective is to reposition a brand, i.e. to change consumers’
perceptions, then you should spend a significant percentage of your total budget in advertising research,
usually from 10% to 15%. In past years, companies have devoted on average 4% of their total advertising
expenditures to advertising research.
You are also required to specify which segments should be targeted with your advertising. This way, the
advertising agency will select the most appropriate media vehicle for the targeted segments; for instance,
targeting Professionals through specific magazines, professional associations or on trade-shows. Obviously,
your advertising strategy should be consistent with the marketing strategy of your firm.
Finally, you must define perceptual advertising objectives for each brand. This enables you to convey a
perceptual message and emphasize, for instance, that a given brand is very powerful or that another one
has a very large display and many features. You will learn more in the Error! Reference source not found.
section at the end of the handbook; it is devoted to brand positioning through advertising and explains how
to set perceptual objectives.
Advertising budgets must be entered each period in the Marketing Mix decision form. Both the advertising
media and research budgets must be given in thousands of dollars. You must also indicate the proportion
of the budget targeted to each segment. The percentages must add to 100%.

6. Commercial Team
Your commercial team is responsible for obtaining and entering orders, and for supporting distributors. It is
organized by channel, in order to better meet the needs of the distributors, and by brand. The team
includes multiple categories of people and resources depending on the channels: sales representatives,
customer support, merchandisers, web masters, blog managers, etc. The main tasks conducted by the
commercial team are to visit stores, distributors and wholesalers; to enroll them in trade programs; to take
orders; to handle out of stock situations; to participate to trade shows; to help stores organize and conduct
promotions, etc.
The marketing department must specify the number of people to allocate to each channel and each brand.
Commercial people may be reallocated at no cost across distribution channels and/or across brands.
However, hiring or firing costs will be automatically charged to your department when the total size of the
commercial team increases or decreases.
Your decisions must be entered each period in the Commercial Team decision form. The size of your
commercial team must be entered in number of Full-Time-Equivalent (FTE), i.e. the equivalent of one
person working full-time for one period.
The cost of your commercial team is proportionnal to the number of allocated FTEs, plus the hiring or firing
costs in case you have extended or decreased its size. Hiring and firing costs are calculated as a percentage


of the FTE cost, as indicated in the newsletter. This cost includes the salary of the person plus additional
expenses such as company car, medical/dental care, etc. It also includes a sales budget that commercial
people can use in activities or tools aimed at increasing sales, such as trade programs, catalogs, permanent
or temporary POS materials, gifts, etc. The commercial team will decide on the best mix of tools depending
on the channel and the target consumers.

7. Market Research Studies
One of your decisions will be to order market research studies. All studies are ordered at the beginning of a
period and are conducted by a specialized research firm during that period. Hence, the information
provided is relevant to the market situation during the analyzed period, with the exception of the Market
Forecast study.The results are delivered with your annual report at the end of the period, and can be used
for the next period’s decisions.
Companies can buy 12 different types of studies, as shown in Figure 6. Studies deal with the Sonite and
Vodite market, consumers and channels. All studies are further detailed in section Error! Reference source
not found..
Most of the studies apply only if there are brands marketed during the period in the corresponding market.
For instance, ordering the Consumer Panel study for the Vodite market is irrelevant if no Vodite brands at
all are marketed. If you order these studies and if no brands were marketed in the period, you will not be
charged for them. However, the corresponding cost is substracted from your budget when you make your
decisions. You can use the Benchmarking study to anticipate whether competition will launch new brands.
Read section “Error! Reference source not found.” to review the operations of the Market Research
decision form.
 Consumer survey  Competitive sales force estimates
 Consumer panel  Industry benchmarking
 Distribution panel  Advertising experiment
 Semantic scales  Sales force experiment
 Multidimensional scaling  Market forecast
 Competitive advertising estimates  Conjoint analysis
Figure 6 – Available market research studies

8. Research & Development
In the past, each firm has successfully completed two R&D projects on which the brands marketed in Period
0 are based. The project name starts with the letters PO followed by the corresponding brand name. For
instance, the R&D project corresponding to the existing brand MOST was called POMOST.
The Marketing department may ask to the Research & Development department to develop new projects
to either upgrade the existing brands or to launch new ones. Indeed, existing products may need to be
improved during their lifetime to adapt to the changing needs of consumers, and new products may have
to be created in order to target untapped segments in existing or new markets.
Chapter Error! Reference source not found. includes detailed information on R&D strategies and
processes. The overview given below will show you how you can control the marketing strategy of your
company, and will give you the level of details necessary to understand the other chapters of this
handbook.
When requesting a new R&D project, the Marketing department must specify the name of the project, the
desired characteristics for the new or improved product, and the target base cost. The Marketing
department must also allocate a budget to the project. Up to ten R&D projects may be ordered each period
for the two markets, five Sonite projects and five Vodite projects.


A. Project Name
Project names may have up to 12 characters. The first letter must be a ‘P’, as in “Project”. The second one
identifies the market of the product being developed: ‘O’ for a Sonite product and ‘E’ for a vodite. The
other characters may be chosen freely. We advise you to give meaningful names to your projects. For
instance, PO-MOVE2 would be a Sonite project developed to upgrade brand MOVE and PE-INNOVS would
be a Vodite project developed to launch a new brand targeted at Innovators.
The name of a completed project can never be reused for a new project, even if it is a minor modification
of the older project.
B. Project Characteristics
The physical characteristics of the project must be given along the five most important attributes described
in sections “Sonite Products” and “Vodite Products”. The values entered must within the feasible ranges, in
the relevant unit; for instance, Battery Life should be between 24 and 96 hours.
Obviously, the Marketing Department should evaluate the attractiveness of various offerings before
deciding on specific characteristics. The needs of the target consumers should be taken into account for
this evaluation. There are multiple methodologies to determine the characteristics of a project; they are all
discussed in chapter Error! Reference source not found..
C. Project Base Cost
The base cost of a project is equal to the transfer cost that will be charged by Production to Marketing for
each unit of the future product, assuming an initial production batch of 100,000 units. Note that the
transfer cost will decrease if you produce more than 100,000 units, as explained in the “Productivity Gains”
chapter.
You may ask the R&D department to develop the project at the lowest possible base cost, also called
minimum base cost. This cost depends on the project characteristics: the higher the level in each attribute
(Processing Power, Display Size, etc.), the higher the minimum unit cost. There is one exception to this rule:
unit cost will increase if you try to reduce the carbon footprint of your products. Developing a project at the
minimum base cost will usually be quite expensive in term of the development budget. Indeed, the R&D
team must not only develop the new characteristics requested, but also select materials and technologies
that are compatible with the low cost target.
You may also ask the R&D department to develop the project at a specified base cost, higher than the
minimum cost. This will give more flexibility to the R&D team in the materials and technnology selection,
and is likely to reduce the development budget. Obviously, the target base cost must be compatible with
the expected brand profitability, taking all factors into account: price, distributor margin, production costs,
marketing and sales expenses, etc.
D. Project Allocated Budget
The Marketing department must allocate a budget to cover the project expenses. These expenses include
the cost of developing the prototype and all the costs related to the transition from R&D to production, i.e.
ensuring that large quantities of identical units can be economically and reliably produced.
At the early stage of the project development, the R&D team will estimate the budget required for
completing the project. This budget will depend on how different the new characteristics are compared to
the ones of projects already developed. Upgrading a Sonite product will initially cost between a few
hundred thousand dollars and 2 million dollars. Industry experts believe that developing the first Vodite
prototype will cost each firm a minimum of 4 million dollars. In both cases, R&D costs will decrease over
time as more projects are successfully developped.
If the budget allocated by Marketing to the project is equal to or higher than the budget required for
completion, then the project will be successfully completed and will thus be available during the following
period to upgrade an existing brand or launch a new one. As the R&D department works as a profit center,
budget allocated in excess of the required budget will not be given back to Marketing.


If the allocated budget is much lower than the budget required for completion, then the project will not be
successfully completed. In this case, you have the choice to complete the project in the following period by
allocating the amount required by R&D in the annual report, or to shelve the project, i.e. to put it aside for
a while until you have sufficient funds to complete it. Note that a project does not have to be finished in
one or two periods; you may well decide to develop your first Vodite prototype in 3 or more periods.
If the allocated budget is slighlty lower than the budget required for completion, then there is a chance that
the project is successfully completed despite the lack of funds. Taking such a risk might not be a good idea
if millions of dollars in revenues depend on the availability of the project.
E. Feasibility Studies
When specifying a new R&D project, you have the choice to allocate a budget to it or to order a feasibility
study. A feasibility study costs $100,000 and takes one period to complete. The information is provided in
the next period within the R&D section of the company report; it includes the minimum base cost at which
the product can realistically be manufactured, and the budget required to guarantee its completion at the
currently requested base cost. The main advantages of feasibility studies are the low cost and the accuracy
of the information provided. Their main drawback is the time it takes to get this information: a full period.
F. Online Queries
An online query provides you with an estimate of the budget required to complete a project. You may
order an online query only when the project is fully specified, i.e. when you have entered the physical
characteristics and the requested base cost.
The main advantage of online queries is that the information is provided to you immediately. Their main
drawbacks are that online query results are usually over-estimated by as much as 15%, or even more for
the new vodite technology, and that the number of queries that you can make within a given period is
limited to 5.
Finally, please note that if you change the specifications of your project (characteristics and/or requested
base cost) after you have run the online query, you no longer have the guarantee that the project will be
completed in one period with the budget given by the query. In this case, you should run a new query to
adjust your decisions according to the new specifications.

9. Productivity Gains
Manufacturing costs tend to decrease over time thanks to the experience effect. This is due to many factors
such as: increase in labour efficiency (less mistakes are made), improvement of methodologies &
processes, usage of new and less expensivematerials and/or technologies, product redesign, etc.
Experience effect should not be confused with economies of scale, the fact of manufacturing costs
decrease with the size of the plant. Indeed, large plants amortize fixed costs on larger production batches;
they have a higher negotiation or lobbying power; they also include machines of varying sizes and speeds,
ensuring higher usage ratio; other cost reduction factors include transportation in big containers or access
to less expensive financing. As the Marketing department is not responsible for production capacity, you
are not concerned with economies of scale.
Hence, one way to reduce manufacturing costs is simply to produce more units of the same product. On
average, it is estimated that manufacturing costs decrease by 15% each time cumulative production is
doubled. This is represented by the blue curve on Figure 7: point A represents the base cost that was
specified when the base project was developed, and point B represents the transfer cost a few periods
later, when cumulative production has reached 600,000 units. The unit cost of this brand has decreased
from $150 to $100, a 33% reduction. Unfortunately, the slope of the curve decreases quite rapidely: the
additional production necessary to get an additional 15% reduction in unit cost gets bigger and bigger.
Firms can further reduce manufacturing costs by launching a cost reduction R&D project, i.e. a project
specifying the same physical characteristics as the initial project, but at a lower base cost. This is
represented by the red curve on Figure 7. Although the unit cost will initially be higher than $100 (point A’),
the curve shows that transfer costs below $100 will be obtained as soon as cumulative production goes


beyong point B’. Then, the transfer costs will be much lower than the ones achievable by the original blue
curve.
Finally, one should not forget that costs will be adjusted for inflation; this will offset part of the reduction
obtained through experience.

Figure 7 – Productivity gains

10. Marketing as a Profit Center
You will operate the Marketing department as a profit center. Your performance will be measured by the
contribution that you generate. Contribution is defined as revenues from sales minus the costs listed
below. Note that your Profit and Loss statement will be described in details in the section “Error! Reference
source not found.”.
 R&D: budgets allocated to R&D projects;
 Production: costs of goods sold and inventory holding costs;
 Advertising: advertising media & research budgets allocated to marketed brands;
 Commercial: costs incurred by the commercial team, in all three channels;
 Market research: costs of market studies ordered in the period;
Each period, you are allocated a budget to cover your expenses in R&D, advertising, commercial activities
and market research purchase. This budget is linked to the success of the department, being equal to 40%
of the net contribution generated in the previous period. However, there is a maximum level where
resources are reallocated to other divisions of the company to maximize the return on investment at the
corporate level. Similarly, there is a minimum budget level for each period, whereby headquarters may
effectively subsidize your division if you are not generating sufficient contribution internally so your division
can continue operations.
In general, your budget for each period will be between 7 and 20 millions dollars, adjusted for inflation. You
will have to work within this given budget: if total spending exceeds the allocated budget for a period,
expenses will be automatically cut by the Finance Control department, starting with advertising
expenditures.
Your objective is to maximize your return on investment. As a consequence, you should not necessarily
spend your entire budget in every situation. Indeed, you should not spend one additional dollar unless you
expect this dollar to generate a return higher than one dollar. If you perform outstandingly, you may be
granted a large budget; however, spending it completely might be a waste of money.


Markstrat web participant-handbook-chap 1 a 3

More Related Content

What's hot (20)

Viewers also liked (14)

Similar to Markstrat web participant-handbook-chap 1 a 3 (20)

More from Master MOI (20)

Recently uploaded (20)

Markstrat web participant-handbook-chap 1 a 3