Materials, tools, equipment and testing devices
Download as PPTX, PDF15 likes36,334 views
This document lists and describes various tools, equipment, and testing devices used for information and communication technology (ICT). It defines a LAN card as a network interface card that allows a computer to connect to a network. It describes a server as a special computer on a network that users can access to perform tasks. It explains that a port is a connector on the back of a computer or device, and can be either serial or parallel. A modem is defined as a device that allows computers to exchange information by modulating and demodulating signals.
Materials, tools, equipment and testing devices
- 1. MATERIALS, TOOLS, EQUIPMENT AND TESTING DEVICES TLE – ICT BY: BRIAN M. MARY
- 2. THE FOLLOWING TOOLS AND EQUIPMENT ARE CLASSIFIED ACCORDING TO THEIR FUNCTION AND USES.
- 3. LAN CARD • is a network interface card. This is a computer circuit board or card that is installed in a computer so that it can be connected to a network.
- 4. SERVER • is a part of a network. It is a special computer that users on the network can access to carry out a particular job
- 5. PORT HUB/PORT • is a connector on the back of a computer or other device. A port is either a serial port or a parallel port.
- 6. MODEM • (Modulator-Demodulator) The modem is a device that allows a given computer to share data or otherwise a device which let computers exchange information •
- 7. SCANNER • it is an input device that read text or illustration printed on paper, translates the information into a form that a computer can use
- 8. FLAT SCREW DRIVER • is used to drive or fasten negative slotted screws
- 9. USB • Universal Serial Bus, a hardware interface for low-speed peripherals such as the keyboard, mouse, joystick, scanner, printer and telephony devices. •
- 10. PRINTER • is a piece of hardware that produces a paper copy (also known as ‘hardcopy’) of the information generated by the computer. •
- 11. RAM • Random Access Memory, is a primary memory. This memory is used inside the computer to hold programs and data while it is running. •
- 12. BIOS • Basic Input/ Output System, chip that controls the most basic functions of the computer and performs a self-test every time you turn it on.
- 13. FLASH DRIVE • RAM that can retain data without electrical power. It is widely used for BIOS chips and for digital camera and digital music storage •
- 14. VIDEO CAMERA • camera using videotape: a camera that records onto videotape •
- 15. LONG NOSE PLIERS • is used for holding, bending and stretching the lead of electronics component or connecting wire. •
- 16. SOLDERING IRON • is used to join two or more metal conductors with the support of soldering lead melted around it. •
- 17. DESOLDERING IRON • is used to unsolder unwanted parts or component in the circuit with the support of soldering pencil •
- 18. PHILIPS SCREW DRIVER • is used to drive or fasten positive slotted screws
- 19. LAN TESTER • for RJ11,12,45& BNC w/ Remote Unit This ergonomic tester is designed to test most network cable wiring. You can either conduct an auto or manual test. •
- 20. UTP • Unshielded Twisted Pair, is a popular type of cable used in computer networking that consists of two shielded wires twisted around each •
- 21. Direction: Identify the appropriate term described in each sentence. Use a separate sheet for your answers. ________1. It is a connector at the black of a computer or other device. ________2. A computer circuit board installed in a computer so that it can be connected to a network. ________3. A device that allows a given computer to share a data. ________4. An input device that read text or illustration printed on paper, translated the information into a form that a computer that can use.
- 22. Direction: Identify the following tool and materials, give their uses. 1. 3. 2. 4.