Mean well rs-100
0 likes321 views
This document summarizes the specifications of a 100W single output switching power supply series called the RS-100. It includes 6 models that output different voltages from 3.3V to 48V with varying current ratings. The power supplies have protections against overloads, over voltages, and short circuits. Key specifications listed are voltage and current ratings, ripple and noise levels, efficiency ratings, input voltage ranges, operating temperatures, and safety certifications. Dimensions and mounting hole locations are provided in a mechanical drawing.
Mean well rs-100
- 1. 100W Single Output Switching Power Supply RS-100 series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test High realibility SPECIFICATION MODEL RS-100-3.3 RS-100-5 RS-100-12 RS-100-15 RS-100-24 RS-100-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 20A 16A 8.5A 7A 4.5A 2.3A CURRENT RANGE 0 ~ 20A 0 ~ 16A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.3A RATED POWER 66W 80W 102W 105W 108W 110.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE 3.2V ~ 3.5V 4.75 ~ 5.5V 11.4 ~ 13.2V 14.25 ~ 16.5V 22.8 ~ 26.4V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 3.0% 2.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.5 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE, HOLD TIME 500ms, 20ms, 50ms/230VAC 1200ms, 30ms, 10ms/115VAC at full load VOLTAGE RANGE 88 ~ 264VAC 125 ~ 373VDC (300VAC peak 5sec. No damage) FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 74% 77% 81% 82% 84% 85% INPUT AC CURRENT 2.5A/115VAC 1.5A/230VAC INRUSH CURRENT(max.) COLD START 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC 110 ~ 150% rated output power OVER LOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 55.2 ~ 64.8V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. -20 ~ +70 (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 Approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B (Note 6) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A MTBF 260.8Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 159*97*38mm (L*W*H) PACKING 0.6Kg; 24pcs/14.4Kg/0.7CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. File Name:RS-100-SPEC 2004-03-25
- 2. 100W Single Output Switching Power Supply RS-100 series Mechanical Specification Case No. 901 Unit:mm 152.5 7 3.5 1 2 9.5 65 3 4 84.5 97 8.2 5 3 6 2 -M 7 3 .5 4.5 24 78 159 6.5 150 9 9 9 18.5 3.5 3- 3 .5 M3 18 38 22 117 Terminal Pin. No Assignment Pin No. Assignment Pin No. Assignment 1 AC/L 4,5 DC OUTPUT -V 2 AC/N 6,7 DC OUTPUT +V 3 FG Output Derating Static Characteristics Ta=25 100 100 Others 90 80 80 60 3.3V,5V 70 LOAD (%) LOAD (%) 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (VERTICAL) 88 95 100 115 120 140 160 180 200 220 240 264 -20 0 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:RS-100-SPEC 2004-03-25