Mill andbrew

1. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 1 LIMITED ONE-YEAR WARRANTY Warranty Coverage: This product is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original purchase date. This product warranty is extended only to the original consumer purchaser of the product and is not transferable. For a period of one (1) year from the date of original purchase of the product, our Repair Center will, at its option, either (1) repair the product or (2) replace the product with a reconditioned comparable model. These remedies are the purchaser’s exclusive remedies under this warranty. Warranty Service: To obtain warranty service, you must call our warranty service num- Mill & Brew™ ber at 1-800-233-9054 for return instructions on how to deliver the product, in either the original packaging or packaging affording an equal degree of protection to the Repair Center specified below. You must enclose a copy of your sales receipt or other proof of purchase to demonstrate eligibility for warranty coverage. 10 CUP COFFEE MAKER To return the appliance, ship to: To contact us, please write to, call, or email: ATTN: Repair Center Consumer Relations Department 708 South Missouri Street PO Box 7366 Macon, MO 63552 USA Columbia, MO 65205-7366 USA Phone: 1-800-233-9054 Email: consumer_relations@toastmaster.com What Is Not Covered: This warranty does not cover damage resulting from misuse, accident, commercial use, improper service or any other damage caused by anything other than defects in material or workmanship during ordinary consumer use. This warranty is invalid if the serial number has been altered or removed from the product. This warranty is valid only in the United States and Canada. LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY INCIDEN- TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES AND CONDITIONS OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ON THIS PRODUCT ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights under the laws of your jurisdiction. For more information on our products, visit our website: www.maxim-toastmaster.com. ©2007 All rights reserved. Made in China Rev. 03/07 Models MEMB1B, MEMB1W

2. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 3 IMPORTANT SAFEGUARDS NOTES When using electrical appliances, basic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock, and injury to persons, do not immerse cord, plug, or Coffee Maker in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Contact Consumer Service for examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. To disconnect, press the POWER Button to turn the unit OFF, then remove plug from wall outlet. 12. Do not use appliance for other than intended use. 13. Be certain Lids are securely in place before operating appliance. 14. Scalding may occur if the Lids are removed during the brewing cycles. 15. This Carafe is designed for use with this Coffee Maker. It must never be used on a range top. 16. Do not set a hot Carafe on a wet or cold surface. 17. Do not use a cracked Carafe or a Carafe having a loose or weakened handle. 18. Do not clean Carafe with cleansers, steel wool pads, or other abrasive material. 19. Check the Mill & Brew™ Basket for presence of foreign objects before using. SAVE THESE INSTRUCTIONS For Household Use Only 1 14

3. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 5 ADDITIONAL How To Decalcify Your Coffee Maker IMPORTANT SAFEGUARDS 1. Pour 1/2 cup of vinegar into the Carafe. Add cold water up to the 4 cup marking. Pour the water / vinegar mixture into the Water WARNING: This appliance generates heat and escaping steam during use. Reservoir and place empty Carafe onto the Warming Plate. Proper precautions must be taken to prevent the risk of burns, fires, or other injury to persons or damage to property. 2. Insert the Mill & Brew™ Basket and Lid into place. DO NOT USE COFFEE! 1. All users of this appliance must read and understand these Use & Care instructions before operating or cleaning this appliance. 3. Press the Mill Button, , to turn the grinding blades off. The Mill 2. The cord to this appliance should be plugged into a 120V AC electrical out- Indicator Light will appear. let only. 4. Press the Power Button, , to begin the cleaning cycle. 3. Use water only in this appliance! Do not put any other liquids or food prod- 5. When the cycle is finished, press the Power Button, , to turn the ucts in this appliance. Do not mix or add anything to the water placed in this Coffee Maker OFF. Carefully remove the Carafe and place on a appliance, except as instructed in the USER MAINTENANCE INSTRUC- heat resistant surface. TIONS to clean the appliance. 4. DO NOT attempt to move an appliance containing hot liquids. Allow appli- 6. Wait 15 minutes. Pour the same vinegar / water solution back into ance to cool completely before moving. the Water Reservoir and replace the Carafe back onto the Warming Plate. 5. Keep appliance at least 4 inches away from walls or other objects during operation. Do not place any objects on top of appliance while it is operating. 7. Repeat steps 3 and 4 above. Place the appliance on a surface that is resistant to heat. 8. When the brew cycle is finished, press the Power Button, , to turn 6. If this appliance begins to malfunction during use, press the POWER Button the Coffee Maker OFF and discard the solution. to turn the unit OFF, then immediately unplug the cord. Do not use or attempt to repair the malfunctioning appliance. 9. To Rinse: Allow the Coffee Maker to cool for 15 minutes. Fill the Carafe with cold fresh water. Pour the water into the Water 7. If this appliance falls or accidentally becomes immersed in water or any Reservoir and replace the Carafe onto the Warming Plate. Press other liquid, unplug it immediately. Do not reach into the water! Do not use the Mill Button, , to turn the grinding blades off. Press the Power this appliance after it has fallen into or has become immersed in water. Button, . When the brew cycle is complete, discard the water. Contact Consumer Service for examination and repair. Repeat this step with another Carafe of fresh water. Discard the 8. DO NOT leave this appliance unattended during use. rinse water. 9. This appliance must be left to cool down sufficiently before adding more 10. Wash and dry all removable parts. Wipe the exterior of the Coffee water to avoid spattering. Maker with a damp cloth. 10. Always use fresh, cool water in your appliance. Warm water or other liquids, except as listed in the USER MAINTENANCE INSTRUCTIONS, may cause damage to the appliance. 11. DO NOT put Carafe into a microwave. 12. DO NOT leave empty Carafe on Warming Plate when appliance is turned ON, as the Carafe may crack or become otherwise damaged. CAUTION: To prevent injury when utilizing Auto Pause and Pour, replace Carafe within 20 seconds of removing during brewing process. 13. Make sure the Mill & Brew™ Basket and Mill & Brew™ Lid are securely assembled into the appliance before use. 14. Only coffee beans and coffee grounds should be placed into the Mill & Brew™ Basket. 13 2

4. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 7 Polarized Plug Mineral Deposits / Decalcifying This appliance has a polarized plug (one blade is wider than the other). Your Coffee Maker must be cleaned when you begin to notice excessive To reduce the risk of electric shock, this plug is intended to fit into a steaming or the brewing time increases considerably. This condition is polarized outlet only one way. If the plug does not fit fully in the outlet, caused by a buildup of lime and mineral deposits from your water. If the reverse the plug. If it still does not fit, contact a qualified electrician. Do pumping action stops before all the water has been pumped out of the not attempt to modify the plug in any way. machine, then the appliance requires decalcification. The frequency of decalcification depends on the hardness of water used. Short Cord Instructions It is suggested that this unit be descaled according to the following A short power-supply cord is provided to reduce the risk resulting from intervals: becoming entangled in or tripping over a longer cord. • Soft water: every 80 brewing cycles Do not use an extension cord with this product. • Hard water: every 40 brewing cycles Plasticizer Warning CAUTION: To prevent Plasticizers from migrating from the finish of the counter top or table top or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken. Permanent blemishes may occur or stains can appear. Electric Power If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances. Coffee Yield 10 Cup Coffee Maker: 10 (5-oz.) cups. NOTE: A 5-oz. cup is the American industry standard and is used by most Coffee Maker manufacturers. To fill your favorite mug, fill Coffee Maker reservoir with enough water for 4 cups (20 ounces). WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER-SERVICEABLE PARTS INSIDE. REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY. 3 12

5. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 9 User Maintenance Instructions Getting To Know Your This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing that Mill & Brew™ Coffee Maker requires disassembly must be performed by a qualified appliance repair Product may vary slightly from illustrations. technician. 6 7 8 5 5 Cleaning Instructions 4 9 6 NOTE: Do not place anything other than water or the vinegar cleaning solution specified in this manual into the Water Reservoir. 3 10 1. To clean your Coffee Maker after brewing, be sure the Coffee Maker 11 4 is turned OFF, unplugged and is cool. 2 3 2. Wipe the outside of your Coffee Maker and the Warming Plate with a 2 1 soft, damp cloth and dry. Do not use abrasive cleaners or scouring 12 1 pads. FIGURE 1 FIGURE 2 3. Hand wash Mill & Brew™ Basket, Mill & Brew™ Lid, Carafe Lid and Carafe in warm, sudsy water. DO NOT PLACE IN DISHWASHER. 4 WARNING: Never immerse the Coffee Maker body in water or other 3 5 liquid. Timer Indicator Light WARNING: Rinse Water Reservoir with cold water periodically. 2 6 Timer Hour NEVER use a cloth to clean or dry the Water Reservoir as the cloth 7 will leave a lint residue and may clog and cause damage to your Minute Coffee Maker. 8 Grind Select Power Light 1 9 Power Mill Mill Indicator FIGURE 3 FIGURE 4 Light FIGURE 1 FIGURE 2 1. Control Panel 1. Measuring Spoon (P/N 30661B blk; 30661 wht) 2. LED Display 2. Grinding Motor Pin 3. Lock Buttons 3. Pause & Pour 4. Mill & Brew™ Assembly (P/N 30643B blk; 30643 wht) 4. Locking Buttons 5. Mill & Brew™ Assembly Lock 5. Mill & Brew™ Assembly Lid 6. Mill & Brew™ Assembly Lid (P/N 30636B blk; 30636 wht) 6. Spreader Tube 7. Viewing Window 8. Reservoir Cover (P/N 30923 blk; 30923W wht) FIGURE 3 9. Water Window 1. Lock Buttons 10. Carafe Lid (P/N 30660B blk; 30660 wht) 2. Basket Tabs 11. Carafe (P/N MEMBCFB blk; MEMBCFW wht) 3. Mill & Brew™ Basket Lid (P/N 30639B) 12. Warming Plate 4. Mill & Brew™ Basket Tabs 5. Safety Interlock Switch 6. Mill & Brew™ Basket (P/N 30640) 7. Maximum Fill Level 8. Blades 9. Pause & Pour 11 4

6. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 11 Before Brewing for the First Time Hints For Best Results CAUTION: To protect against electric shock, do not immerse the • A clean Coffee Maker is essential for making great tasting coffee. Coffee Maker or allow AC cord to come into contact with water or other Regular cleaning, as specified in the USER MAINTENANCE liquids. INSTRUCTIONS, is highly recommended. 1. Carefully unpack your Coffee Maker. Remove any labels from the outer • Always use fresh, cold water in your Coffee Maker. surfaces. • Do not add less than 4 cups (20 ounces) of water to the Water 2. Clean the Carafe, Carafe Lid, Mill & Brew™ Basket and Mill & Brew™ Reservoir. Basket Lid in warm, soapy water. Rinse thoroughly and dry. • Do not add more than 8 scoops of whole bean coffee to the Mill & 3. Fill the Water Reservoir to the 10-cup mark with cold water. Place Brew™ Basket. Carafe onto the Warming Plate. • The Coffee Mill is intended for COFFEE ONLY. Never grind any 4. Insert the Mill & Brew™ Basket and Mill & Brew™ Basket Lid into the other food products or spices in the Coffee Mill. Coffee Maker, taking care to replace it properly. DO NOT USE COF- • Store coffee in a cool, dry place. Once coffee has been opened, FEE WHEN CLEANING. USE WATER ONLY. Close the Mill & keep it tightly sealed in the refrigerator to maintain freshness. Brew™ Assembly Lid. • Do not re-use coffee grounds. NOTE: The Mill & Brew™ Lid must be closed securely in order for the brew cycle to begin. • Reheating coffee is not recommended. Coffee is at its peak flavor immediately after brewing. 5. Plug the Coffee Maker into a 120V AC electrical outlet. 6. Press the Mill Button, , to turn the grinding blades off. The Mill Indicator Light will appear. 7. To start the cleaning cycle, press the Power Button, , and the water will begin to flow the Coffee Maker. 8. When the Carafe is full, press the Power Button, , to turn the unit OFF. Discard the water in the Carafe. Allow the unit to cool for 15 minutes. 9. Refill the Water Reservoir and repeat steps 6-8 one more time. 10. After the second pot of water has cooled, discard the water and thoroughly wash the Carafe, Carafe Lid, Mill & Brew™ Basket and Mill & Brew™ Basket Lid in warm, soapy water. Rinse thoroughly and dry. Setting the Clock 1. Plug the Coffee Maker into a 120V AC outlet. Display will show 12:00 and will continue to flash until the time is set. 2. Press and hold the Hour Button, , until the LED Display begins to flash. The unit is now in the clock-setting mode. 3. Press the Hour and Minute Buttons, and , to set the correct time. A small dot will appear in the upper left corner of the display to signify A.M. No visible dot indicates P.M. The clock display will flash 5 times, then stop. The time is now set. 5 10

7. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 13 Auto Pause and Pour Feature OPERATING INSTRUCTIONS The Auto Pause and Pour feature allows you to pour a cup of coffee before brewing is complete. Simply remove the Carafe from the Warming Plate. Always keep the Lid on the Carafe down when pouring the coffee. Brewing Coffee - Immediate Start 1. Plug the appliance into a standard 120V AC electrical outlet. IMPORTANT: When using the Auto Pause and Pour feature while the Coffee Maker is still brewing, the Carafe must be replaced in its proper 2. Markings on the Carafe indicate the level of water required to brew position on the Warming Plate within 20 seconds to prevent overflowing. the desired number of cups. Fill the Carafe with cold tap water. Close the Lid back into position. Replacing the Carafe will restart the brewing process. NOTE: Brewing less than 4 cups is not recommended. Keep Warm Function 3. Lift up the Reservoir Cover and slowly pour water into the Water The automatic Keep Warm function keeps coffee at the proper serving Reservoir. Place empty Carafe onto the Warming Plate. temperature for up to 1 hour from brewing. To keep coffee hot, return the 4. Open the Mill & Brew™ Assembly Lid and grasp Mill & Brew™ Carafe to the Warming Plate after serving. Basket Tabs to remove the Basket Lid. Using the scoop provided To deactivate this function after brewing, simply press the Power with your Coffee Maker, measure the desired amount of roasted Button, , to turn the unit OFF. whole bean coffee into the Mill & Brew™ Basket. We recommend using 1 scoop for every 2 cups of brewed coffee, which may be To Brew a Second Pot of Coffee adjusted to suit your individual tastes. NOTE: 1 scoop = 1 tablespoon. To brew a second pot of coffee, turn the Coffee Maker OFF for WARNING: The Mill & Brew™ Basket maximum capacity is 8 10 minutes and allow it to cool. Empty used coffee grounds from the Mill scoops of whole bean coffee. DO NOT EXCEED THE 8-SCOOP & Brew™ Basket and repeat steps for brewing. MAXIMUM. CAUTION: Failure to allow appliance to cool completely may cause NOTE: 8 scoops = 8 tablespoons maximum. water to overheat and spray hot steam. The hot steam can cause severe burns. 5. Replace Mill & Brew™ Basket Lid. Make sure Basket is firmly seat- ed in Assembly, Lid on Basket is secured and Lid to Assembly is closed before attempting to operate unit. WARNING: The Coffee Maker will not operate without the Lids being closed properly. NOTE: Ground coffee may be substituted for whole bean coffee. We recommend using 1/2 to 1 tablespoon of ground coffee beans for every brewed cup of coffee, which may be adjusted to suit your individual tastes. See PROGRAMMING THE MILL for complete pro- cedure. 6. You are now ready to initiate the automatic mill and brew process. If you wish to use the delay timer so you can program the coffee maker to mill and brew later, please read BREWING COFFEE - PROGRAMMING THE DELAY TIMER. 9 6

8. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 15 Programming the Mill Brewing Coffee - Programming Delay Timer NOTE: If you desire a medium grind, your machine is automatically pre- 1. Follow steps 1 — 6 in BREWING COFFEE — IMMEDIATE START set to 4 or a medium grind; refer to step 2 below. If you wish to pro- and 1-3 in PROGRAMMING THE MILL. gram a finer or coarser grind, start with step 1. 2. Be sure clock is set to the current time (see SETTING THE CLOCK 1. To set the mill to grind the beans to the desired level of coarseness, instructions on Page 6). press the Select Button, , to select different coarseness levels. Seven levels of coarseness are available. Coarseness is deter- 3. Press and hold the Timer Button, ,until the Timer Light appears mined by the length of time milled - the longer the time, the finer the and the display reads 12:00. Use the Hour and Minute Buttons, grind the stronger the flavor. Setting 1 will mill the beans for 15 sec- and , to set the desired programmed time. A small dot will appear onds. Setting 7 will mill the beans for 40 seconds. If you do not in the upper left corner of the display to signify A.M. No visible dot select a setting the unit will automatically default to setting 4. Make indicates P.M. sure the Mill Light is turned off. 4. The timer display will flash 5 times then switch back to the current NOTE: If you wish to use pre-ground coffee instead of whole coffee time of day. Press and release the Timer Button, . The pro- beans, press the Mill Button, , and make sure the Mill Indicator grammed time is now set and the Timer Indicator Light will turn on to Light is on. If you are using whole coffee beans, then the light indicate the timer has been reset. should be off. NOTE: The programmable function must be reset after each programmed 2. Press the Power Button, , to initiate the mill and brew process; the use. Power Light will turn on. Mill will start. After mill stops, unit will automatically switch to brewing operation. To interrupt milling or brewing press the Power Button, , and the Power Light will turn off. CAUTION: Do not open Mill & Brew™ Lid until blades and unit operation has come to a complete stop. 3. After brewing is complete, remove Carafe from Warming Plate and serve. Coffee Maker Warming Plate will cycle on and off to maintain proper coffee temperature for one hour before it automatically shuts off and the Power Light turns off. 4. Unplug and allow unit to cool for 10 minutes between cycles. Allow to cool completely before attempting to clean. WARNING: Warming Plate is hot! Do not touch bottom of Carafe or Warming Plate during or after brewing. NOTE: After the unit is turned off or automatically shuts off after one hour, mill coarseness setting will default to level 4 (medium grind). Coarseness setting will also default to level 4 in the event of power inter- ruption. NOTE: The amount of coffee in the Carafe may be slightly less than the amount of water placed in the Water Reservoir, since some of the water is absorbed by the coffee grounds. 7 8

9. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 15 Programming the Mill Brewing Coffee - Programming Delay Timer NOTE: If you desire a medium grind, your machine is automatically pre- 1. Follow steps 1 — 6 in BREWING COFFEE — IMMEDIATE START set to 4 or a medium grind; refer to step 2 below. If you wish to pro- and 1-3 in PROGRAMMING THE MILL. gram a finer or coarser grind, start with step 1. 2. Be sure clock is set to the current time (see SETTING THE CLOCK 1. To set the mill to grind the beans to the desired level of coarseness, instructions on Page 6). press the Select Button, , to select different coarseness levels. Seven levels of coarseness are available. Coarseness is deter- 3. Press and hold the Timer Button, ,until the Timer Light appears mined by the length of time milled - the longer the time, the finer the and the display reads 12:00. Use the Hour and Minute Buttons, grind the stronger the flavor. Setting 1 will mill the beans for 15 sec- and , to set the desired programmed time. A small dot will appear onds. Setting 7 will mill the beans for 40 seconds. If you do not in the upper left corner of the display to signify A.M. No visible dot select a setting the unit will automatically default to setting 4. Make indicates P.M. sure the Mill Light is turned off. 4. The timer display will flash 5 times then switch back to the current NOTE: If you wish to use pre-ground coffee instead of whole coffee time of day. Press and release the Timer Button, . The pro- beans, press the Mill Button, , and make sure the Mill Indicator grammed time is now set and the Timer Indicator Light will turn on to Light is on. If you are using whole coffee beans, then the light indicate the timer has been reset. should be off. NOTE: The programmable function must be reset after each programmed 2. Press the Power Button, , to initiate the mill and brew process; the use. Power Light will turn on. Mill will start. After mill stops, unit will automatically switch to brewing operation. To interrupt milling or brewing press the Power Button, , and the Power Light will turn off. CAUTION: Do not open Mill & Brew™ Lid until blades and unit operation has come to a complete stop. 3. After brewing is complete, remove Carafe from Warming Plate and serve. Coffee Maker Warming Plate will cycle on and off to maintain proper coffee temperature for one hour before it automatically shuts off and the Power Light turns off. 4. Unplug and allow unit to cool for 10 minutes between cycles. Allow to cool completely before attempting to clean. WARNING: Warming Plate is hot! Do not touch bottom of Carafe or Warming Plate during or after brewing. NOTE: After the unit is turned off or automatically shuts off after one hour, mill coarseness setting will default to level 4 (medium grind). Coarseness setting will also default to level 4 in the event of power inter- ruption. NOTE: The amount of coffee in the Carafe may be slightly less than the amount of water placed in the Water Reservoir, since some of the water is absorbed by the coffee grounds. 7 8

10. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 13 Auto Pause and Pour Feature OPERATING INSTRUCTIONS The Auto Pause and Pour feature allows you to pour a cup of coffee before brewing is complete. Simply remove the Carafe from the Warming Plate. Always keep the Lid on the Carafe down when pouring the coffee. Brewing Coffee - Immediate Start 1. Plug the appliance into a standard 120V AC electrical outlet. IMPORTANT: When using the Auto Pause and Pour feature while the Coffee Maker is still brewing, the Carafe must be replaced in its proper 2. Markings on the Carafe indicate the level of water required to brew position on the Warming Plate within 20 seconds to prevent overflowing. the desired number of cups. Fill the Carafe with cold tap water. Close the Lid back into position. Replacing the Carafe will restart the brewing process. NOTE: Brewing less than 4 cups is not recommended. Keep Warm Function 3. Lift up the Reservoir Cover and slowly pour water into the Water The automatic Keep Warm function keeps coffee at the proper serving Reservoir. Place empty Carafe onto the Warming Plate. temperature for up to 1 hour from brewing. To keep coffee hot, return the 4. Open the Mill & Brew™ Assembly Lid and grasp Mill & Brew™ Carafe to the Warming Plate after serving. Basket Tabs to remove the Basket Lid. Using the scoop provided To deactivate this function after brewing, simply press the Power with your Coffee Maker, measure the desired amount of roasted Button, , to turn the unit OFF. whole bean coffee into the Mill & Brew™ Basket. We recommend using 1 scoop for every 2 cups of brewed coffee, which may be To Brew a Second Pot of Coffee adjusted to suit your individual tastes. NOTE: 1 scoop = 1 tablespoon. To brew a second pot of coffee, turn the Coffee Maker OFF for WARNING: The Mill & Brew™ Basket maximum capacity is 8 10 minutes and allow it to cool. Empty used coffee grounds from the Mill scoops of whole bean coffee. DO NOT EXCEED THE 8-SCOOP & Brew™ Basket and repeat steps for brewing. MAXIMUM. CAUTION: Failure to allow appliance to cool completely may cause NOTE: 8 scoops = 8 tablespoons maximum. water to overheat and spray hot steam. The hot steam can cause severe burns. 5. Replace Mill & Brew™ Basket Lid. Make sure Basket is firmly seat- ed in Assembly, Lid on Basket is secured and Lid to Assembly is closed before attempting to operate unit. WARNING: The Coffee Maker will not operate without the Lids being closed properly. NOTE: Ground coffee may be substituted for whole bean coffee. We recommend using 1/2 to 1 tablespoon of ground coffee beans for every brewed cup of coffee, which may be adjusted to suit your individual tastes. See PROGRAMMING THE MILL for complete pro- cedure. 6. You are now ready to initiate the automatic mill and brew process. If you wish to use the delay timer so you can program the coffee maker to mill and brew later, please read BREWING COFFEE - PROGRAMMING THE DELAY TIMER. 9 6

11. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 11 Before Brewing for the First Time Hints For Best Results CAUTION: To protect against electric shock, do not immerse the • A clean Coffee Maker is essential for making great tasting coffee. Coffee Maker or allow AC cord to come into contact with water or other Regular cleaning, as specified in the USER MAINTENANCE liquids. INSTRUCTIONS, is highly recommended. 1. Carefully unpack your Coffee Maker. Remove any labels from the outer • Always use fresh, cold water in your Coffee Maker. surfaces. • Do not add less than 4 cups (20 ounces) of water to the Water 2. Clean the Carafe, Carafe Lid, Mill & Brew™ Basket and Mill & Brew™ Reservoir. Basket Lid in warm, soapy water. Rinse thoroughly and dry. • Do not add more than 8 scoops of whole bean coffee to the Mill & 3. Fill the Water Reservoir to the 10-cup mark with cold water. Place Brew™ Basket. Carafe onto the Warming Plate. • The Coffee Mill is intended for COFFEE ONLY. Never grind any 4. Insert the Mill & Brew™ Basket and Mill & Brew™ Basket Lid into the other food products or spices in the Coffee Mill. Coffee Maker, taking care to replace it properly. DO NOT USE COF- • Store coffee in a cool, dry place. Once coffee has been opened, FEE WHEN CLEANING. USE WATER ONLY. Close the Mill & keep it tightly sealed in the refrigerator to maintain freshness. Brew™ Assembly Lid. • Do not re-use coffee grounds. NOTE: The Mill & Brew™ Lid must be closed securely in order for the brew cycle to begin. • Reheating coffee is not recommended. Coffee is at its peak flavor immediately after brewing. 5. Plug the Coffee Maker into a 120V AC electrical outlet. 6. Press the Mill Button, , to turn the grinding blades off. The Mill Indicator Light will appear. 7. To start the cleaning cycle, press the Power Button, , and the water will begin to flow the Coffee Maker. 8. When the Carafe is full, press the Power Button, , to turn the unit OFF. Discard the water in the Carafe. Allow the unit to cool for 15 minutes. 9. Refill the Water Reservoir and repeat steps 6-8 one more time. 10. After the second pot of water has cooled, discard the water and thoroughly wash the Carafe, Carafe Lid, Mill & Brew™ Basket and Mill & Brew™ Basket Lid in warm, soapy water. Rinse thoroughly and dry. Setting the Clock 1. Plug the Coffee Maker into a 120V AC outlet. Display will show 12:00 and will continue to flash until the time is set. 2. Press and hold the Hour Button, , until the LED Display begins to flash. The unit is now in the clock-setting mode. 3. Press the Hour and Minute Buttons, and , to set the correct time. A small dot will appear in the upper left corner of the display to signify A.M. No visible dot indicates P.M. The clock display will flash 5 times, then stop. The time is now set. 5 10

12. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 9 User Maintenance Instructions Getting To Know Your This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Any servicing that Mill & Brew™ Coffee Maker requires disassembly must be performed by a qualified appliance repair Product may vary slightly from illustrations. technician. 6 7 8 5 5 Cleaning Instructions 4 9 6 NOTE: Do not place anything other than water or the vinegar cleaning solution specified in this manual into the Water Reservoir. 3 10 1. To clean your Coffee Maker after brewing, be sure the Coffee Maker 11 4 is turned OFF, unplugged and is cool. 2 3 2. Wipe the outside of your Coffee Maker and the Warming Plate with a 2 1 soft, damp cloth and dry. Do not use abrasive cleaners or scouring 12 1 pads. FIGURE 1 FIGURE 2 3. Hand wash Mill & Brew™ Basket, Mill & Brew™ Lid, Carafe Lid and Carafe in warm, sudsy water. DO NOT PLACE IN DISHWASHER. 4 WARNING: Never immerse the Coffee Maker body in water or other 3 5 liquid. Timer Indicator Light WARNING: Rinse Water Reservoir with cold water periodically. 2 6 Timer Hour NEVER use a cloth to clean or dry the Water Reservoir as the cloth 7 will leave a lint residue and may clog and cause damage to your Minute Coffee Maker. 8 Grind Select Power Light 1 9 Power Mill Mill Indicator FIGURE 3 FIGURE 4 Light FIGURE 1 FIGURE 2 1. Control Panel 1. Measuring Spoon (P/N 30661B blk; 30661 wht) 2. LED Display 2. Grinding Motor Pin 3. Lock Buttons 3. Pause & Pour 4. Mill & Brew™ Assembly (P/N 30643B blk; 30643 wht) 4. Locking Buttons 5. Mill & Brew™ Assembly Lock 5. Mill & Brew™ Assembly Lid 6. Mill & Brew™ Assembly Lid (P/N 30636B blk; 30636 wht) 6. Spreader Tube 7. Viewing Window 8. Reservoir Cover (P/N 30923 blk; 30923W wht) FIGURE 3 9. Water Window 1. Lock Buttons 10. Carafe Lid (P/N 30660B blk; 30660 wht) 2. Basket Tabs 11. Carafe (P/N MEMBCFB blk; MEMBCFW wht) 3. Mill & Brew™ Basket Lid (P/N 30639B) 12. Warming Plate 4. Mill & Brew™ Basket Tabs 5. Safety Interlock Switch 6. Mill & Brew™ Basket (P/N 30640) 7. Maximum Fill Level 8. Blades 9. Pause & Pour 11 4

13. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 7 Polarized Plug Mineral Deposits / Decalcifying This appliance has a polarized plug (one blade is wider than the other). Your Coffee Maker must be cleaned when you begin to notice excessive To reduce the risk of electric shock, this plug is intended to fit into a steaming or the brewing time increases considerably. This condition is polarized outlet only one way. If the plug does not fit fully in the outlet, caused by a buildup of lime and mineral deposits from your water. If the reverse the plug. If it still does not fit, contact a qualified electrician. Do pumping action stops before all the water has been pumped out of the not attempt to modify the plug in any way. machine, then the appliance requires decalcification. The frequency of decalcification depends on the hardness of water used. Short Cord Instructions It is suggested that this unit be descaled according to the following A short power-supply cord is provided to reduce the risk resulting from intervals: becoming entangled in or tripping over a longer cord. • Soft water: every 80 brewing cycles Do not use an extension cord with this product. • Hard water: every 40 brewing cycles Plasticizer Warning CAUTION: To prevent Plasticizers from migrating from the finish of the counter top or table top or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter top or table top. Failure to do so may cause the finish to darken. Permanent blemishes may occur or stains can appear. Electric Power If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances. Coffee Yield 10 Cup Coffee Maker: 10 (5-oz.) cups. NOTE: A 5-oz. cup is the American industry standard and is used by most Coffee Maker manufacturers. To fill your favorite mug, fill Coffee Maker reservoir with enough water for 4 cups (20 ounces). WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER-SERVICEABLE PARTS INSIDE. REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY. 3 12

14. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 5 ADDITIONAL How To Decalcify Your Coffee Maker IMPORTANT SAFEGUARDS 1. Pour 1/2 cup of vinegar into the Carafe. Add cold water up to the 4 cup marking. Pour the water / vinegar mixture into the Water WARNING: This appliance generates heat and escaping steam during use. Reservoir and place empty Carafe onto the Warming Plate. Proper precautions must be taken to prevent the risk of burns, fires, or other injury to persons or damage to property. 2. Insert the Mill & Brew™ Basket and Lid into place. DO NOT USE COFFEE! 1. All users of this appliance must read and understand these Use & Care instructions before operating or cleaning this appliance. 3. Press the Mill Button, , to turn the grinding blades off. The Mill 2. The cord to this appliance should be plugged into a 120V AC electrical out- Indicator Light will appear. let only. 4. Press the Power Button, , to begin the cleaning cycle. 3. Use water only in this appliance! Do not put any other liquids or food prod- 5. When the cycle is finished, press the Power Button, , to turn the ucts in this appliance. Do not mix or add anything to the water placed in this Coffee Maker OFF. Carefully remove the Carafe and place on a appliance, except as instructed in the USER MAINTENANCE INSTRUC- heat resistant surface. TIONS to clean the appliance. 4. DO NOT attempt to move an appliance containing hot liquids. Allow appli- 6. Wait 15 minutes. Pour the same vinegar / water solution back into ance to cool completely before moving. the Water Reservoir and replace the Carafe back onto the Warming Plate. 5. Keep appliance at least 4 inches away from walls or other objects during operation. Do not place any objects on top of appliance while it is operating. 7. Repeat steps 3 and 4 above. Place the appliance on a surface that is resistant to heat. 8. When the brew cycle is finished, press the Power Button, , to turn 6. If this appliance begins to malfunction during use, press the POWER Button the Coffee Maker OFF and discard the solution. to turn the unit OFF, then immediately unplug the cord. Do not use or attempt to repair the malfunctioning appliance. 9. To Rinse: Allow the Coffee Maker to cool for 15 minutes. Fill the Carafe with cold fresh water. Pour the water into the Water 7. If this appliance falls or accidentally becomes immersed in water or any Reservoir and replace the Carafe onto the Warming Plate. Press other liquid, unplug it immediately. Do not reach into the water! Do not use the Mill Button, , to turn the grinding blades off. Press the Power this appliance after it has fallen into or has become immersed in water. Button, . When the brew cycle is complete, discard the water. Contact Consumer Service for examination and repair. Repeat this step with another Carafe of fresh water. Discard the 8. DO NOT leave this appliance unattended during use. rinse water. 9. This appliance must be left to cool down sufficiently before adding more 10. Wash and dry all removable parts. Wipe the exterior of the Coffee water to avoid spattering. Maker with a damp cloth. 10. Always use fresh, cool water in your appliance. Warm water or other liquids, except as listed in the USER MAINTENANCE INSTRUCTIONS, may cause damage to the appliance. 11. DO NOT put Carafe into a microwave. 12. DO NOT leave empty Carafe on Warming Plate when appliance is turned ON, as the Carafe may crack or become otherwise damaged. CAUTION: To prevent injury when utilizing Auto Pause and Pour, replace Carafe within 20 seconds of removing during brewing process. 13. Make sure the Mill & Brew™ Basket and Mill & Brew™ Lid are securely assembled into the appliance before use. 14. Only coffee beans and coffee grounds should be placed into the Mill & Brew™ Basket. 13 2

15. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 3 IMPORTANT SAFEGUARDS NOTES When using electrical appliances, basic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock, and injury to persons, do not immerse cord, plug, or Coffee Maker in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Contact Consumer Service for examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. To disconnect, press the POWER Button to turn the unit OFF, then remove plug from wall outlet. 12. Do not use appliance for other than intended use. 13. Be certain Lids are securely in place before operating appliance. 14. Scalding may occur if the Lids are removed during the brewing cycles. 15. This Carafe is designed for use with this Coffee Maker. It must never be used on a range top. 16. Do not set a hot Carafe on a wet or cold surface. 17. Do not use a cracked Carafe or a Carafe having a loose or weakened handle. 18. Do not clean Carafe with cleansers, steel wool pads, or other abrasive material. 19. Check the Mill & Brew™ Basket for presence of foreign objects before using. SAVE THESE INSTRUCTIONS For Household Use Only 1 14

16. Melitta_MEMB1B_W_IB_31-3-07 4/3/07 2:34 PM Page 1 LIMITED ONE-YEAR WARRANTY Warranty Coverage: This product is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original purchase date. This product warranty is extended only to the original consumer purchaser of the product and is not transferable. For a period of one (1) year from the date of original purchase of the product, our Repair Center will, at its option, either (1) repair the product or (2) replace the product with a reconditioned comparable model. These remedies are the purchaser’s exclusive remedies under this warranty. Warranty Service: To obtain warranty service, you must call our warranty service num- Mill & Brew™ ber at 1-800-233-9054 for return instructions on how to deliver the product, in either the original packaging or packaging affording an equal degree of protection to the Repair Center specified below. You must enclose a copy of your sales receipt or other proof of purchase to demonstrate eligibility for warranty coverage. 10 CUP COFFEE MAKER To return the appliance, ship to: To contact us, please write to, call, or email: ATTN: Repair Center Consumer Relations Department 708 South Missouri Street PO Box 7366 Macon, MO 63552 USA Columbia, MO 65205-7366 USA Phone: 1-800-233-9054 Email: consumer_relations@toastmaster.com What Is Not Covered: This warranty does not cover damage resulting from misuse, accident, commercial use, improper service or any other damage caused by anything other than defects in material or workmanship during ordinary consumer use. This warranty is invalid if the serial number has been altered or removed from the product. This warranty is valid only in the United States and Canada. LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY INCIDEN- TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT. DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES AND CONDITIONS OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ON THIS PRODUCT ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights under the laws of your jurisdiction. For more information on our products, visit our website: www.maxim-toastmaster.com. ©2007 All rights reserved. Made in China Rev. 03/07 Models MEMB1B, MEMB1W

Mill andbrew

More Related Content

Viewers also liked (14)

Similar to Mill andbrew (20)

Recently uploaded (20)

Mill andbrew