Mini Project ppt.pptx
- 1. Bluetooth RC Controller SEM-IV By AYUSH PATIL ADITYA MORE PRATHAMESH NIKAM RAHUL CHAVAN SEM-IV EXTC 1
- 2. Content • Introduction • Problem Definition • Literature Survey • Implementation • Results • Conclusion • References SEM-IV EXTC 2
- 3. INTRODUCTION • A remote controlled vehicle is any mobile machine controlled by means that is physically not connected with origin external to the machine. There are many types in it, based on the controls – radio control device, Wi-Fi controlled and even Bluetooth controlled. These devices are always controlled by humans and take no action autonomously. The main target in such vehicles would be to safely reach a designated point, maneuver the area and reach back to the point of origin. • In this project we make use of the Bluetooth technology to control our machine • • car. We don’t call this as a robot as this device doesn’t have any sensors. Thereby, sensor less robots are machines. This machine ccan be controlled by any human using his android mobile phone, by downloading an app and connecting it with the Bluetooth module present inside our car. User can perform actions like moving forward, backward, moving left and right by the means of command using his-her mobile phone app. The task of controlling our car is taken car by the Arduino UNO with micro controller ATMEGA32, 16 mHz processor, 2 KB SRAM (Static Random Accessible Memory) and 32 KB flash memory. Arduino play a major role in the control section and had made it easier to convert digital signals and analogue signals into physical movements. The major reason for using a Bluetooth based tech is that we can change the remote anytime – mobiles phones, tablets and laptops and physical barriers like wall or doors do not affect the car controls SEM-IV EXTC 3
- 4. Problem Definition SEM-IV EXTC 4 This project's main motive is to expand the knowledge for smart micro-controllers like Arduino, which is widely used in the latest IoT technologies. Making the use of Connectivity Modules like Bluetooth HC-05, to understand the different modes of operating and communications with the micro-controller board. To get familiar with Codes and programs used for the controlling of the Arduino Uno board. Introductory project for Every Electronics And Electrical Student, to get the working of the Arduino board and its software.
- 5. Literature Survey The main aim is to design the cost-efficient Bluetooth-controlled robot car for material handling which is eco-friendly. Many researchers had developed robotic systems to reduce human efforts and described their technologies. These robotic designs were controlled by software programs. Winter et al. developed Android- controlled robot. This system was used for transferring the information wirelessly . Bluetooth-controlled robotic systems for material handling have yet not obtained wide popularity and publicity. Public are still dependent on physical labors of human. So, these devices need much publicity and can be used as the best alternative to human physical labors. SEM-IV EXTC 5
- 6. Implementation Arduino Bluetooth control vehicle is a straightforward robot vehicle that can be constrained by your cell phone. This Smartphone gives a Bluetooth sign to the vehicle and from the sign, the vehicle works. For running the vehicle remotely we are utilizing the HC-05 Bluetooth module. We interface your telephone with the Bluetooth module. At that point, the telephone sends some arbitrary characters which are expressed for running the vehicle. When all is said in done, case, F is utilized for sending vehicle development. B is utilized for a retrogressive vehicle second. So also, other characters are utilized for different headings which are referenced in the Arduino code. For controlling the motors we are utilizing an l298n engine driver. you can likewise utilize l293d too. I picked l298n in over l293d on the grounds that it has high force yield. In the event that you are keen on l293d Bluetooth vehicle, at that point ensure you buy into our YouTube channel. Presently for running the vehicle clearly we need a force source. In this way, For the force source, we are utilizing 18650 Lithium-particle cells. You can likewise utilize whatever other battery which is recorded beneath SEM-IV EXTC 6
- 7. Results It have wide range of control and more efficient.It also gice advantage of changing the remote anytime,meaning that we can use any android device including phones,tablet ,computer. Physical barriers like wall , doors,etc do not effect in controlling the car We can control it by our phone, just by installing the Bluetooth RC Controller app.It is machine which can be use for transferring good from one place to another ,which can reduce labour cost. SEM-IV EXTC 7
- 8. Conclusion The cost-efficient Bluetooth-controlled robot car is designed to lessen the physical labors of human being during the material handling. The performance of this proposed design could be improved with modification. This work is to increase the productivity of industry. The publicity of this design is very much needed. This device can be used in purpose of the military also. By reducing the physical labors for transferring the valuable materials of the industry, home, farms, etc, we can min-imize the adverse effects and approach the problems electronically which will be beneficial for the future generations. The future goal of this design is to improve the efficiency using Internet of things (IoT) and wireless sensor network (WSN) and add the web camera with security features SEM-IV EXTC 8
- 9. References 1)Arduino IDE 2)Bluetooth Car (https://play.google.com/store/apps/details?id=braulio.calle.bluetoothRCcontrolle) 3. Guardi, V.M.: Design of a Bluetooth Enabled Android Application for a Microcontroller Driven Robot. Diss. Rensselaer Polytechnic Institute (2014) 4. Birk, A., Schwertfeger, S., Pathak, K.: A networking framework for teleoperation in safety, security, and rescue robotics. IEEE Wirel. Commun. 16(1), 6–13 (2009) SEM-IV EXTC 9