MMMC subcontractor induction quiz
- 1. MMC Induction Questionnaire Click to continue
- 2. IMPORTANT INFORMATION Click to continue PLEASE READ BEFORE COMMENCING THE QUIZ This quiz will ONLY work by clicking through and answering each question. You will not advance through the quiz If you do not answer each question. Scrolling will cause the quiz to shut down, if this happens simply open The quiz and start again. Good luck.
- 3. This quiz is made up of 14 multiple choice questions. The quiz should take you Approximately 10 minutes Click to continue
- 4. Questions 1 Who do you have a duty of care to? A. Yourself B. Others C. Both A and B
- 5. INCORRECT You’re only partly right, lets give this one another go. Try again
- 6. CORRECT Duty of care is a legal term that refers to a business', employer's or service provider's obligation to put reasonable measures in place to ensure that everyone associated with them is fully protected from any physical or psychological harm. Next question
- 7. Questions 2 To whom do you report hazards, incidents, injuries or near misses to? A. Worksafe B. MMC Site Management C. General Manager D. None of the Above
- 8. Incorrect Lets give it another go. Back
- 9. Correct All hazards, incidents, injuries and near misses should be reported to MMC Site Management first. Next question
- 10. Questions 3 If working near an unprotected edge where there is a fall of 2 metres or more you must: A. Have a fall protection system in place B. Be trained in working at heights C. Have the work at heights activities included in your SWMS D. All of the above
- 11. Incorrect Lets give it another go. Back
- 12. Correct Working at height activities need to be included in your SWMS Next question
- 13. Questions 4 If you have to enter areas where mobile plant are working ensure that you: A. Make eye contact with plant operator and make sure they have stopped before you approach B. Are wearing a helmet C. Have a permit D. Have checked the ground conditions for any uneven surfaces
- 14. Incorrect Lets give it another go. Back
- 15. Correct Always ensure the plant operator has seen and acknowledged you. Next question
- 16. Questions 5 What are the requirements when using electrical equipment? A. Must be tagged B. Each item must be checked for condition each day C. Extension leads must be protected from damage and conductive liquids D. All of the Above
- 17. Incorrect Lets give it another go. Back
- 18. Correct All equipment must be tagged, items must be in good working order and extension leads must be protected. Next question
- 19. Questions 6 What should you do if you hear the evacuation signal? A. Immediately proceed to the Muster point B. Make sure you outrun at least one person C. Pack up all of your equipment as you may not know if you will be returning to site D. Notify your next of kin
- 20. Incorrect Lets give it another go. Back
- 21. Correct Proceed to the designated muster location straight away. Next question
- 22. Questions 7 When conducting manual tasks you should always: A. Assess the weight and if safe use correct lifting techniques B. Make sure everyone can see just how much you can lift C. Use mechanical assistance such as trolley or forklift D. Use team lifting techniques. A, C and D
- 23. Incorrect Lets give it another go. Back
- 24. Correct Use team lifting techniques. Next question
- 25. Questions 8 It is ok to enter an exclusion zone only if you obtain permission from the person controlling the exclusion zone A. True B. False
- 26. Incorrect Lets give it another go. Back
- 27. Correct You can enter an exclusion zone only if you obtain permission from the person controlling the exclusion zone. Next question
- 28. Questions 9 If you are in a piece of machinery that comes into contact with underground or overhead power, and remains in contact you should: A. Jump straight out of the machine B. Stand on top of the machine C. Remain in the machine if it is safe to do so until the power is disconnected D. Step off the machine slowly
- 29. Incorrect Lets give it another go. Back
- 30. Correct Always remain in the machinery (if it is safe to do so), until the power is disconnected. Next question
- 31. Questions 10 What is an essential control measure that you should have in place when you are working with large items, such as structural steel or concrete panels, that have the potential to fall on people? A. Adequate PPE B. An exclusion zone with physical barriers and signage C. Work at heights training D. First Aid Supplies
- 32. Incorrect Lets give it another go. Back
- 33. Correct Physical barrier and signage around the exclusion zone. Next question
- 34. Questions 11 You should never work elevated over a handrail A. True B. False
- 35. Incorrect Lets give it another go. Back
- 36. Correct Never work elevated over a handrail. Next question
- 37. Questions 12 It is fine to use electrical tools without checking them for damage prior to use A. True B. False
- 38. Incorrect Lets give it another go. Back
- 39. Correct All equipment should be checked for damage prior to use. Next question
- 40. Questions 13 Leads should not be joined in a series such that the total length exceeds 30 metres. A. True B. False
- 41. Incorrect Lets give it another go. Back
- 42. Correct Leads should not be joined in a series that exceeds 30 metres. Next question
- 43. Questions 14 Where there is a risk of falling objects, no exclusion zone needs to be set up A. True B. False
- 44. Incorrect Lets give it another go. Back
- 45. Correct Well done! Congratulations You’ve Passed! Click HERE to email for your 'Certificate of Completion'