Mountain Stream Group: Portfolio Sample - Quality Control Manual Development
1 like444 views
This document provides specifications for bag components of three bag sizes - Mini, Medium, and Large. It specifies dimensions and tolerances for the bag shell, bottom board, turntop, side seam, patch paper, handles, bag graphics, and general dimensions. Dimensional tolerances are specified as ±1/8 inch unless otherwise noted. The document includes diagrams and notes intended to ensure dimensional consistency and quality for bag production.
Mountain Stream Group: Portfolio Sample - Quality Control Manual Development
- 1. “WHAT TO WATCH FOR” Dimensional tolerances are ±1/8” unless otherwise specified.
- 2. WRIGHT PACKAGING LARGE WR-950 MEDIUM WR-949 MINI WR-948 2 “WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
- 3. WRIGHT PACKAGING BAG COMPONENTS 6 Handles 5 Patch Paper 4 Side Seam 3 Turntop 1 Shell 7 Bag Graphics 2 Bottom Board/ Bag Bottom 8 General Dimensions 3 Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
- 4. WRIGHT PACKAGING 1 Shell • 80# Smurfit Stone Kraft Paper • Inside of shell is 100% ink coverage. • Color refer to sample board. 4 “WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
- 5. WRIGHT PACKAGING 2 Bottom Board/ Bag Bottom • Bottom board to be 500 gsm. • 100% ink coverage on bottom board • Bottom board tipped into bag. • 1/8” ± 1/16” stripe on bag bottom flap. • Refer to sample board for bottom board and stripe color. 1/8” Stripe -1/16” +1/16” 5 Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
- 6. WRIGHT PACKAGING 3 Turntop • Targeted gap between top of turn to printed border is 1/8” ± 1/16” 1/8” -1/16” Top of Bag +1/16” Turntop Shell Turntop Border 1-1/8” -1/16” +1/16” 1-3/8” 2” Patch Paper See Specifications for Bag Height by Size 1/16” Gap 1/8” Gap (Target) 3/16” Gap Turntop border color CAN NOT coincide with the top of the bag. Turntop border color CAN NOT roll over onto the front of the bag. 6 “WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
- 7. WRIGHT PACKAGING 4 Side Seam • Seam exposure is 1/8” ±1/16” Side Seam Glue Flap 1/8” -1/16” +1/16” Gap 7 Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
- 8. WRIGHT PACKAGING 5 Patch Paper • Positioned in center of panel between seams. • Parallel to the turntop. • Refer to sample board for color. • Refer to sample board for positioning. // Parallel C L 8 “WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
- 9. WRIGHT PACKAGING 6 Handles • Twisted red kraft paper • Refer to sample board for color • Handle width 4” • Handle height 3” at top of arch. • Front and back handle offset per sample board. • Handle and bag assembly weight tested: Mini: 6 Medium & Large: 10 lbs 4” 3” Handles Offset Thickness of the handle 9 Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
- 10. WRIGHT PACKAGING 7 Bag Graphics • Refer to sample board for gelpop-color, gloss and hardness. • Refer to sample board for gray type and stripe color. • Align graphics’ center vertically in the front and back panels. • Refer to sample board for horizonal positioning. C L 10 “WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
- 11. WRIGHT PACKAGING 8 General Dimensions H G W BAG SIZE P/N W G H MINI WR-948 8.625 4.500 10.625 MEDIUM WR-949 12.500 5.750 15.500 LARGE WR-950 16.000 6.000 18.750 11 Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”