Norms 2017

1
ITIs AFFILIATION NORMS 2017
INDEX
SECTION –I CIVIL NORMS Page No
1. Building Completion certificate & Plot/Land Details - 02
2. Institutional Area - 03
3. Administrative & Amenities area - 04
4. Desirable Requirements - 05
5. Basic requirements - 05
6. General Guide lines - 07
7. Standard Fire safety norms - 11
8. Work shop area norms (Annexure -2F) - 13
9. Existing space requirements (Annexure -2E) - 21
SECTION –II, PROCEDURAL NORMS –Will be published shortly

2
ITIs AFFILIATION NORMS 2017
I) PROPOSED CIVIL NORMS FOR ESTABLISHMENT OF ITIs
A) Sizes of the class room and workshop shall remain the same as mentioned in existing
norms placed at Annexure 2E & Annexure 2F
B) In addition to B.C.C and existing guidelines as per annexure 2E and 2F, there are other
essential requirements that have to be met and are as follows
Sl.
No.
Particulars Description of norms
1.0 Building
Completion
Certificate
Desirous Institutes are required to submit a Building Completion
Certificate (BCC) from the Competent Authority clearly stating that the
Building(s) is fully constructed and ready in all respects for the intended use
as per the local building Bye-Laws related to Institutional Buildings. If local
buildings Bye-Laws are not available then the building should conform to
the bye-laws prescribed for Institutional buildings in National Building Code
(N.B.C) of India (Refer to Part 3, Part 4, Part 8 and Part 9).
2.0 Land/Plot
Size based on
Capacity
a) Rural Places as defined by Competent Authority – Minimum area of the
plot shall be 0.8 Hectares/ 02 Acres up to 200 trainees per shift, there after
additional area of 40 Sq. M for each trainee.
b) Other than Rural place (Competent Authority to certify that the place is
not located in a rural area.) - Minimum area of the plot shall be 1.25 Acres
up to 200 trainees per shift , there after additional area of 25 Sq. M for each
trainee
C) In urban areas where higher Floor Area Ratio (FAR)/ Floor Space Index
(FSI) limits are permitted, the requirement of plot area may vary
proportionately

3
Sl.
No.
Particulars Description of norms
2.1 Ownership of the Plot &
building. a) Owned Plot / Building or
b) Plot / Building which is registered live lease, minimum
lease period of 10 years shall be allowed.
2.2 Integrated building
All the blocks of the institute should be constructed with in
a single contiguous plot as per local building byelaws.
2.3 Plot Entrance Gate Institute shall be constructed plot entrance gate minimum
06 m as per the local building byelaws.
2.4 Building entrance Gate Minimum 2.4 m width is required ,As per the local
building byelaws.
3.0 Institutional Area
3.1 Class room The minimum size of classroom shall be 25 sq.mt. with
minimum width of 3 m.
3.2 Work shop area. As per existing norms mentioned in Annexure 2F
3.3 Roof of workshop
a) Flat/pitched RCC roof as prescribed for construction of
the workshop or
b) Profiled Industrial roof sheets with structural supports as
per IS/ASME standards should be allowed. Sheds with tin
sheets/Asbestos sheets should not be allowed
3.4 Drawing Hall Drawing Hall is required for all engineering tardes
with minimum area of 50 Sq.M except Draughts man
(civil)/ Draughts man (mechanical) trades.This area
is upto 160 trainees and thereafter additional
proportionate area for each additional trainee
3.5 Backup Power Supply
Institute should have backup supply with a capacity 50%
of power supply for all the affiliated trades .Backup
power supply generator should have proper installation
with separate arrangement of dedicated control panel for
safe switch over.
Note: Training equipment /machinery will not be
considered against infrastructure, equipment as per norms.
3.6 Raw material storage Room
and oil & Gas storage room
Raw material storage Room/Oil & Gas storage room shall
be minimum area 90 sq.m. Where ever gas/oil storage is
required, room shall be separate with raw material storage
room otherwise single room of area 90 Sq.m is sufficient.
3.7 IT Lab The minimum size of the IT lab shall be 25 sq.mt for 10
computers. An additional 2.5 sq.mt. Shall be made
available for each additional computer.
The minimum width of the lab shall be 3 mt.Floor shall be

4
at least Tiled
4.0 Administrative Area
4.1 Principal Room Minimum area 20 Sq.mt.
4.2 Reception cum waiting
lobby
Minimum area 40 Sq.mt. NOTE : The area
proposed upto 160
trainees and
thereafter
additional
proportionate area
for each additional
trainee
4.3 Staff Room Minimum area 20 Sq.mt.
4.4 Administrative Hall/Section. Minimum area 50 Sq. mt.
4.5 Placement/Counselling
room
Minimum area 20 Sq. mt.
5.0 Amenities Area
5.1 Multipurpose Hall/Court
Yard
Minimum area 110 Sq. mt.
5.2 Library & reading Room Minimum area required for library and reading room
should be 40 Sq. M for up to 160 trainees and then
10Sq.M for every additional 40 trainees.
.
5.3 Canteen (including kitchen
& pantry)
Minimum area 110 Sq. mt
5.4 First Aid Room Minimum 15 Sq.m
5.5 Play ground As per Local Building Bye-Laws.
5.6 Drinking water facility Institute shall be provided Treated Drinking water facility
at all floor/workshops as per the local building bye-laws
6.0 Boards and Signage’s
6.1 Signage Board on plot
entrance
Details needed: ITI's name and full address and ITI logo &
Skill India Logo.
6.2 Signage Board on Institute
building
Details needed: ITI's name, and ITI logo &Skill India logo
6.3 Signage Boards showing
directions
Directions should be displayed showing the different
sections of the building like work shop, admin building and
hostel etc. Signage boadrs for 3 phase power
supply ,danger boards,prohibited areas etc also
needs to display.
6.4 Trade details board Trade details board shall display the list of trades, seating
capacity and number of trainees enrolledand name &
specifications of the machinary/equipment.

5
6.5 Staff details board Staff details board shall display with name, qualification
and contact numbers at least for principal and public
relation officer.
6.6 Desirable Requirements:
i. Rainwater harvesting (For
all the Institutes irrespective
of the trainee strength)
ii. Solar Energy/Power
Systems
iii. Announcement system in
classrooms, strategic
locations for general
announcements and
announcements in case of
emergency.
iv. Enterprise Resource
Planning (ERP) Software
for Student-Institution-
Parent interaction
v. ATM
vi. CCTV Security System
vii. LCD (or similar) projectors
in classrooms
Note : Solar Energy
/ Renewable energy
source availabiity ,
sewage treatment
plant and Rain
water conservation
and augmentation
is manditory for all
the ITI’s having the
strength more than
500 trainees in each
shift.
7.0 Important basic requirements
7.1 Open spaces around the
building
Not less than 06 m. National Building
Code of India part
3 development
control rules and
general building: 8
open spaces (within
plot):8.3 other
occupancies; (b)
page no.25
7.2 Open spaces separate for each
building
Building more than 07 m. height
shall not be less than 1.5 m
National Building
Code of India part
3 development
control rules and
general building: 8
open spaces (within
plot):8.1.2 page
no.23
7.3 Ceiling height of building Minimum 3.6 m for all region
(the maximum height of building
National Building
Code of India part

6
shall not exceed 1.5 times the width
of road abutting plus the front open
space)
3 development
control rules and
general building:
12 requirements of
part of building:
12.2: 12.2.1.1 : (a)
7.4 Car parking-
A) individual
B) common
Min 3m x 6m
Min. 3.75 m x 5.m
National Building
Code of India part
3 development
control rules and
general building
requirements: 10
off street parking:
refer 10.1 to 10.9
page no 28 & 29
for detail
Scooter/two wheeler & not less than 1.25 sq.m each
Bicycle not less than 1.00 sq.m each
NOTE Area for each equivalent car space inclusive of circulation area is 23 sq.m for open
parking,28sq.m for ground floor covered parking and 32 sq.m for basement
7.5 STAIR CASE REQUIRMENT
width of stair 2.0 m National Building
Code of India part
3 development
control rules and
general building:
12 requirement of
part of
building:12.18:
12.18.1 to 12.18.2
page no.34
width of tread 0.3 m
height of riser 0.15 m
riser shall be limited up to 12 per
flight
height of head room 2.2 m
7.6 TOILET /WC FACILITY
Institutes shall be provided separate toilets for boys, girls and differently abled persons
separately as per local building bye-laws/NBC of India
7.6 a STAFF
WATER CLOSET Minimum 01 nos. ( max 25 nos male)
Minimum 01 nos.( max 15 nos female)
For differenttly abled persons shall be provide as per local
bukding bye laws .
URINALS Minimm 01 nos. (for max 20 persons)
Ablution tap installed in each water closet.
Seperate urinals shall be provide for boys,girls and
differently abled persons as per local building bye-laws
.
WASHBASINS Minimum 01 nos for 25 person
A) Treated drinking water
FOUNTAIN
Minimum 01 nos for 100 person at each floor of the
building and work shop.
7.6 b TRAINEE
A) WATER CLOSET 01 per 40 boys
01 per 25 girls
For differenttly abled persons shall be provided as per local

7
building bye laws/NBC of India.
B) URINALS 01 per 20 boys and 01 per 15 Girls
Seperate urinals shall be provided for boys,girls and
differently abled persons as per local building bye-laws
C) WASHBASINS 01 per 60 boys
01 per 40 girls
building bye laws/NBC of India
D) DRINKING WATER
FOUNTAIN
01 per 50 boys & girls
building bye laws/NBC of India
7.7 Disaster Management Plan All the Institutes shall have disaster management plan as
prescribed in the general guide lines S.NO 08 & 09.
8.0 General Guidelines
Essential and desirable Requirements / General Guidelines in case of various Events:
8.1. FIRE
Essential requirements:
 All the buildings, after completion and before occupation, shall be inspected for fire and life
safety measures by the Local Fire Service Authorities and a certificate to that effect shall be
obtained. In the absence of such a certificate, following requirements shall be met.
 Fire buckets filled with sand shall be hanged in the protected stands near workshop, laboratory,
DG room, transformer and sub-station.
 Fire point should be established in front of each building with 2 fire water buckets, 2 sand
buckets and 4 fire extinguishers one of each type.
 Minimum 2 numbers of extinguisher of any type should be installed at every prominent location
 Every exit, exit access or exit discharge shall be continuously maintained free of all obstructions
or impediments to full use in case of fire or other emergency.
 Retro reflective Signage shall be provided for escape routes at suitable height.
 Evacuation drill shall be conducted for each building quarterly.
 To avoid stampede and to manage any emergency properly, the Institution should have a
Standing Fire Order – Document containing established procedures required to handle fire &
emergency situations in which duties & responsibilities of various Authorities & Agencies are
included (Sample copy enclosed).
Desirable requirements:
 The CCTV camera shall be provided to cover all the important areas of the campus including
fire fighting system like extinguishers, hose reels, risers, automatic detection and alarm system,
sprinkler system, manual call points etc.
 Assembly point shall be provided in a safe place with no fencing around it.

8
8.2. ELECTRICAL HAZARD
 Proper earthling and bonding of electrical wiring shall be ensured.
 All major equipment shall be earthed separately
 Earth leakage circuit breaker (ELCB) shall be provided as required.
 No overhead High tension electric line shall pass across the premises.
 Sub stations or transformers if any shall be segregated. Carbon di-oxide, dry chemical
powder (DCP) and Mechanical foam fire extinguishers, san buckets shall be provided.
 All overhead electric lines shall be at a height not less than 5.4 m from the ground.
 Electrical resistant mats should be placed in front of every electric panel.
 Only trained and licensed electricians should be allowed to do work related to electric
supply.
 Vertical clearance of any bare electric line passing near a building shall be minimum 2.43 m
from the highest point in the building and the horizontal clearance shall be minimum 1.2 m
from the closest part.
 A clear space of not less than 1 m in width shall be provided in front of the switchboard.
 If there are any attachments or bare connections at the back of the switchboard, the space (if
any) behind the switchboard shall be either less than 20 cm or more than 75 cm in width,
measured from the farthest outstanding part of any attachment or conductor.
 Lightning arrester shall be provided for all the buildings
8.3. UNSAFE DRINKING WATER / FOOD:
 Clean all reservoirs on periodic basis
 Test quality of water every three months.
Desirable requirements
 Test quality of samples of food prepared on campus in an independent laboratory preferably
once in six months.
8.4 WORKSHOP ACCIDENT
 Personal protective equipment shall be available for each one entering the workshop.
 Instructions for workshop safety must be displayed inside and outside the workshop.
 First aid kit shall be maintained.
 Safety precaution for operation for each machine should be affixed with it.
 Standard Operating Procedure (S.O.P.) for all the equipment and system must be
prepared and properly displayed near the respective machine.
 All the electrically operated machinery should be properly earthed and bonded.
 Emergency contact numbers shall be displayed for contacting in case of any emergency
which should include Safety Officer, fire control room, medical assistance, Security
assistance, Head of the concerned department, maintenance services.

9
 Instructions regarding the procedure to be followed in case of an emergency occurring
in the building outside the workshop during the running of work shop shall be displayed
inside and outside the workshop in the form of Do’s and Don’ts.
 While installing or keeping machines and tool, racks aisles and gangways should be
provided.
 There should be Schedule for standard test for machines and tools.
 Work shop floor should be made by non-skid and non-static floor tiles.
 Place for disposal of materials should be properly marked.
 Housekeeping shall be done as per proper Schedule.
 Various fuels used in work shop shall be stored in minimum quantity according to
requirement.
 Proper ventilation facilities shall be provided to prevent dust accumulation. 6.
8.5 EMERGENCY SITUATION - PHYSICALLY CHALLENGED
 Ramp shall be provided for the disabled for easy access to and evacuation from the
building.
 Sufficient wheel chairs and stretchers shall be available for use in emergency Desirable
requirements:
 Information regarding the number of physically challenged people in the campus should
be available with the Safety Officer.
 The time and the number of physically challenged persons among the visitors shall be
recorded at security gate.
8.6 STRUCTURAL FAILURE OF BUILDING
General Guidelines:
 Emergency evacuation procedure with evacuation plan shall be kept ready.
 Provisions shall be made to cut off water, electricity, and LPG connections safely from
outside the building.
 Structural audit of buildings shall be done periodically.
STAMPEDE
Guidelines to be followed
 Proper signage for traffic control route shall be displayed.
 Public Address system shall be implemented to communicate and to direct.
 Power back up for extra illumination of exit routes shall be available.
 It is necessary to do planning and practicing mannerly and orderly evacuation and
maintaining records.

10
 Student volunteers need to be trained for proper evacuation
 Ensure that no more than 4 persons / sq.m. Shall assemble in all assembly areas.
 Temporary barriers shall be provided to use in emergency to restrict and to control traffic.
8.7 EARTH QUAKE
General Guidelines:
 Construction of building shall be as per relevant Indian Standards and Codes of practice.
Already constructed structures if already not designed to satisfy earthquake resistance, shall
be strengthened as per relevant Indian Standards and Codes of practice.
 Proper evacuation plan based on the Standing Fire Order shall be maintained and it should
cover all the possible emergencies.
 Evacuation drill / Exit drill shall be conducted quarterly and such records shall be
maintained (Different groups, members, date of conduct, observations).
 Training should be given to all members of the evacuation teams to perform their duties and
records shall be maintained.
 The most suitable and safest place shall be selected as safe assembly point for each
building.
 Large or heavy items if any shall be placed closest to the ground.
 Hang large items such as framed pictures, large mirrors etc. away from sitting place, bed
and protected escape routes.
 Brace overhead light fittings properly.
 An inventory for the details of heavy duty equipment and necessary tools with the details
and contact numbers of owner and operator shall be maintained for ready reference.
 Avoid glass panelling for buildings. However if provided, shall be protected with metal
screens.
8.8 CYCLONE
General Guidelines:
 Keep in contact with the concerned authorities before the cyclone season each time for
warning and precautionary measures
 List of emergency phone numbers shall be displayed.
 Training should be given to all members of the response teams to perform their duties, and
records shall be maintained
 Provision shall be made to secure strongly all doors, windows and other openings, if any, in
closed position.
 Emergency kits containing portable battery radios, torch lights, spare batteries, water
container, dry fruits, match boxes, fuel lamps, portable stove, cooking utensil, etc. shall be
maintained in cyclone prone areas.
 Low frequency communication devices shall be in place.
 Avoid glass panelling for buildings. However if provided, shall be protected with metal
screens.
 Construction of buildings shall be strong enough to resist collapse during wind.
 Long and continuous structures shall be avoided so as to reduce the effect of wind.
 Deep rooted plants which can resist wind can be planted around but outside the boundary
wall to reduce the wind velocity.

11
 No tall plants shall be there in the compound, especially near any building.
8.9 FLOOD:
General Guidelines:
 Provision for the storage of drinking water at the rate of 4.5 litres / 1 Day / person for the
total occupants for a minimum of 3 days during impending flood shall be made.
 Provision for storage of non-perishable easy to prepare food for 3 days’ supply during
impending flood shall be made.
 Flash light for signal (Red cross store) shall be arranged.
 Portable battery Radios (if possible NOAA - National Oceanic and Atmospheric
Administration type) shall be arranged.
 Flood rescue equipment like lifebuoy, life jacket, and portable boats with oar and out board
engine, rope shall be stored and ready for use.
 Occupational Health centre shall be maintained.
 Para medical Team shall be available and trained.
 Provision should be made on top floors of the buildings for shelter in case of flood.
 Insect repellents and sunscreen shall be stored.
LAND SLIDE
General Guidelines:
 Construct Retaining walls wherever necessary to prevent erosion.
 Train permanent staff to identify the symptoms of landslide.
 Avoid buildings in steep slope or along natural erosion valleys.
9.0 STANDING FIRE ORDER
(To be displayed at all the floors at suitable visible places with all emergency contact numbers)
9.1 Responsible authorities
 The person who detects the Fire
 Safety Officer
 Maintenance Section
9.2 Detects the fire
 Immediately inform the Safety officer and Head of the section / division
9.3 Responsibilities of safety officer:
On receipt of information:
 He / She shall immediately proceed to the scene of incident and assess the situation.
 If considered necessary, He / She shall raise fire alarm for His / Her zone, and notify the
incident to Fire department and the listed emergency services, officer shall have confirmed
this action latter.

12
 If necessary, he/she shall direct the Maintenance section to salvage the records and
materials from the area.
 If considered necessary, He / She shall evacuate His / Her zone and/or neighbouring zones.
 At the earliest opportunity He / She shall inform the incident to the Departmental head.
Duties of Maintenance section Members:
 On receipt of call for emergency in their own zone, all the members of Maintenance
section;
 Shall immediately proceed to the place of incident and report to their Duty Officer.
 Shall strictly follow the instructions of Safety Officer and work under him / her as per his /
her directions.
 Shall, as per the instructions from Duty Officer/Fire Officer, switch off electrical supply to
the affected area.
 Shall see that electric supply is restored only on instructions from the Duty Officer/Fire
Officer.
 Close the air condition system at the affected area.
 Shall ensure that booster pump located in the building is Switched On.
 Shall ensure that all the Hydrants in and around the Building are charged with sufficient
pressure.
Duties of other staff from the affected zone/zones:
 On hearing the Emergency Alarm, all the other members of staff:-
 Are requested no to be panic, but to remain calm and follow instructions of the Safety
Officer in an orderly and disciplined manner.
 If directed to evacuate, shall ensure that all the electric lights at their work place are
switched off and that all the windows and doors of their area are properly closed before
leaving the place.
 During evacuation, shall proceed in an orderly manner to the ground floor by the nearest
available staircase/emergency exit.
 Shall not use the lifts.
 Shall see that, persons assigned with specific duties in an emergency are not disturbed or
obstruct their work.

13
Annexure – 2F
WORKSHOP NORMS
Norms for Engineering and Non-Engineering Trades
Engineering Trades
S.
No.
Name of the Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms
for
Classroom
(Sq Mt)
Power Supply
load (KW)
3-Phase,
Commercial
1
Architectural
Assistant
2 20
80+35 for
Computer room
25 5
2
Attendant Operator
(Chemical Plant)
4 16 104 25 13
3
Civil Engineer
Assistant
4 20 120 25 6
4
Computer Hardware
& Network
Maintenance
2 20 70 25 3.45
5 Domestic Painter 2 20 80 25 2.5
7
Draughtsman
(Mechanical)
4 20 64 25 3.7
8 Electrician 4 16 98 25
5.2 (for 2 units
in one shift)
9 Electronic Mechanic 4 20 56 25 3.04
10 Electroplater 4 16 60 25 16
11 Fitter 4 16 88 25 3.51
12
Foundry man
Technician
2 16 128 25 11
13 General Carpenter 2 20 120 25 8

14
S.
No.
Name of the Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms
for
Classroom
(Sq Mt)
Power Supply
load (KW)
3-Phase,
Commercial
14 Gold Smith 2 16 48 25 5
15 Industrial Painter 2 20 80 25 2.5
16
Information
Technology
4 20 70 25 3.45
17
Information
Technology
Communication
4 20 70 25 3.45
18 Instrument Mechanic 4 20 80 25 8.07
19
Instrument Mechanic
(Chemical Plant)
4 16 104 25 8
20
Interior Decoration
and Designing
2 20
40+80+36
(6x6 for
Computer lab)
25 10
21
Laboratory Assistant
(Chemical Plant)
4 16 96 25 6
22
Lift & Escalator
Mechanic
4 16 98.6 25 6
23 Machinist 4 12 130 25 20
24 Machinist (Grinder) 4 12 102 25 23.4
25
Maintenance
Mechanic (Chemical
Plant)
4 16 96 25 13
26 Marine Engine Fitter 2 16 84 25 3
27 Marine Fitter 4 16 256 25 30
28
Mason (Building
Constructor)
2 20 80 25 3

15
S.
No.
Name of the Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms
for
Classroom
(Sq Mt)
Power Supply
load (KW)
3-Phase,
Commercial
29 Mech. Motor Cycle 2 16
100 (Including
Parking Area)
25 3
30
Mechanic
Mechatronics
(Fitting and
Measurement)
4 16 192 25 8
31
Mechanic (Motor
Vehicle)
2 16
210 (Including
Parking Area)
25 4.8
32
Mechanic
(Refrigeration and
Air-Conditioner)
4 20 80 25 6.82
33 Mechanic (Tractor) 2 16 210 25 4.8
34
Mechanic
Agricultural
Machinery
4 16 56 25 5
35
Mechanic Air-
conditioning Plant
4 25
36
Mechanic Auto Body
Painting
2 16
210 (Including
Parking Area)
25 4.8
37
Mechanic Auto Body
Repair
2 16
210 (Including
Parking Area)
25 4.8
38
Mechanic Auto
Electrical and
Electronics
2 16
100 (Including
Parking Area)
25 3
39
Mechanic Consumer
Electronics
Appliances
4 20 56 25 3.04
40
Mechanic Diesel
Engine
2 16
150 (Including
Parking Area,
Workshop 130,
Parking 20)
25 4.8
41
Mechanic
Lens/Prism Grinding
2 12 100 25 7.5
42
Mechanic Machine
Tools Maintenance
4 16 192 25 17

16
S.
No.
Name of the Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms
for
Classroom
(Sq Mt)
Power Supply
load (KW)
3-Phase,
Commercial
43
Mechanic Medical
Electronics
4 20
120 sq.mts.
(inclusive of 10
sq.mts Dark
room area)
25 5
44
Mechanic Mining
Machinery
4 20 292 25 20
45
Operator Advanced
Machine Tools
4 12 144 25 25
46 Painter General 4 16 56 25 5
47
Physiotherapy
Technician
2 16 100 25 3
48
Plastic Processing
Operator
2 16 Adequate space 25 13.6
49 Plumber 2 20 80 25 2
50
Pump Operator-cum-
Mechanic
2 16 84 25 11
51
Radiology
Technician (Radio
Diagnosis &
Radiotherapy)
4 16 75.04 25 4
52
Refractory
Technician
4 16 130 (L:B::2:1) 25 13.6
53 Rubber Technician 2 20 60 25 5
54 Sheet Metal Worker 2 16 80 25 11
55 Spinning Technician 4 16 525 25 19
56
Stone Mining
Machine Operator
2 20
100sq.m covered
area + 250sq. m
open area
25 10
57
Stone Processing
Machines Operator
2 20 100 25 10
58 Surveyor 2 20 64 25 3

17
S.
No.
Name of the Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms
for
Classroom
(Sq Mt)
Power Supply
load (KW)
3-Phase,
Commercial
59
Technician Power
Electronic System
4 20 70 25 5
60 Textile Mechatronics 4 20 240 25 9
61
Textile Wet
Processing
Technician
4 16 104 25 8
62
Tool & Die Maker
(Dies & Moulds)
4 16 130 25 29.6
63
Tool & Die Maker
(Press Tools, Jigs &
Fixtures)
4 16 130 25 29.6
64 Turner 4 12 110 25 18.5
65 Vessel Navigator 4 16 240 25 20
66 Weaving Technician 4 20 525 25 9.4
67 Welder 2 16 80 25 16
68
Welder (Fabrication
& Fitting)
2 16 80 25 16
69
Welder (GMAW &
GTAW)
2 16 80 25 16
70 Welder (Pipe) 2 16 80 25 16
71 Welder (Structural) 2 16 80 25 16
72
Welder (Welding &
Inspection)
2 16 80 25 16
73 Wireman 4 16 88 (11x8) 25 5
Non Engineering Trades

18
S.
No.
Name of the
Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms for
Classroom(Sq
Mt)
Power
Supply load
(KW)
74 Agro Processing 2 20 96 25 6
75
Architectural
Draughtmanship
2 20
100 + 80(for
Computer Lab)
25 4
76
Assistant Tourist
Guide
2 20 56 25 4
77
Baker and
Confectioner
2 20 96 25 16.6
78 Bamboo Works 2 20 100 25 10
79
Basic
Cosmetology
2 20 70 25 6
80
Catering
&Hospitability
Assistant
2 16 64 25 19
81
Computer Aided
Embroidery &
Designing
2 16 64 25 5
82
Computer
Operator and
Programming
Assistant
2 20 70 25 3.45
83 Dairying 2 25 125 25 3
84
Data Base
System
2 20 70 25 3.45
85
Dental
Laboratory
Equipment
Technician
4 20 120 25 12
86
Desk Top
Publishing
Operator
2 20 70 25 4.3
87
Digital
Photographer
2 16 48 25 6.35
88 Dress Making 2 16 64 25 5
89
Fashion Design
&Technology
2 16 64 25 5
90
Finance
Executive
2 20
80 (50 + 30
Language Lab)
25 4

19
S.
No.
Name of the
Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms for
Classroom(Sq
Mt)
Power
Supply load
(KW)
91
Fire Technology
and Industrial
Safety
Management
2 20
*1,000 sq.mt. for
practical
Training ground
can be away from
the Institute at the
distance of
maximum 20 Kms.
in safe zone
25 2
92
Floriculture &
Landscaping
2 20
1 Hectare plot of
land/10000 sq.mt.
25 2
93 Food Beverages 2 20 96 25 6
94
Food Beverages
Guest Services
Assistant
2 16 48 25 8
95
Food Production
(General)
2 20 96 25 4
96 Footwear Maker 2 16 72 25 4
97
Front Office
Assistant
2 20 56 25 4.5
98
Fruit &
Vegetable
Processing
2 20 96 25 5
99
Health Safety
and
Environment
2 20
*1,000 sq. mt. for
practical
Training ground
can be away from
the Institute at the
distance of
maximum 20 Kms.
in safe zone
25 2
100
Health Sanitary
Inspector
2 20 40 25 4
101 Horticulture 2 20
1 Hectare plot of
land/10000 sq.mt.
25 2
102
Hospital House
Keeping
2 20 40 25 5
103 House Keeper 2 20 40 25 4.5
104
Human
Resources
Executive
2 20
80 (50 + 30
Language Lab)
25 4
105
Leather Goods
Maker
2 16 72 25 4

20
S.
No.
Name of the
Trade
No. of
Semester
Unit
Size
Space norms for
Workshop per
unit
(Sq Mt)
Space Norms for
Classroom(Sq
Mt)
Power
Supply load
(KW)
106
Marketing
Executive
2 20
80 (50 + 30
Language Lab)
25 4
107
Milk & Milk
Products
2 20 96 25 6
108
Multimedia
Animation &
Special Effect
2 20
130 (Studio -
50sq.mt, Lab- 80
Sq.mt.
25 6
109 Old Age Care 2 20 100 25 2
110 Photographer 2 16 48 25 7
111
Pre/Preparatory
School
Management
(Assistant)
2 20 48 25 3
112
Process
Cameraman
2 16 96 25 4
113
Secretarial
Practice
(English)
2 20 48 25 8
114
Sewing
Technology
2 16 64 25 5
115 Software Testing 2 20 70 25 3.45
116 Spa Therapy 2 20 80 25 6
117
Stenographer
and Secretarial
Assistant
(English)
2 20 48 25 8
118
Stenographer
and Secretarial
Assistant (Hindi)
(Ashulipi avam
Sachivalay
Sahayak (Hindi)
2 20 48 25 8
119
Surface
Ornamentation
Techniques
(Embroidery)
2 16 64 25 5
120
Travel &Tour
Assistant
2 20 56 25 4.5
121
Weaving of Silk
and Woolen
Fabrics
2 16 144 25 17

21
Annexure –2E
Space Requirement of ITI’s and Various Trades under Craftsmen Training Scheme
1.1 Space Requirement in ITI’s (Workshop Building) :The details of space requirement and electrical
connected load for the trades is given in Annexure 2.F
1.2 Space Norms for Workshop for ITI’s 
 It has been approved by the NCVT Sub Committee that the workshop for all trades
must be rectangular in shape and width must not be less than 05 meter.
 All the walls of workshop, classroom, Principal room, staff room, Library, store ,
washroom, boundary wall of Institute etc. should be plastered and colour
/distemper/ whitewashed.
 The minimum size of classroom shall be 25 sqm. With minimum width of 3 m.
 The walls of workshop made of tin sheet are not allowed.
 The minimum height of workshop must be 10 feet (3.048 meter) for RCC roof and
12 feet (3.65 meter) for tin shed roof from lower end.
 All built- up areas of Institute should be at least cemented/ tiled. Class rooms and
Administrative areas, IT lab will be preferred flooring with tiles .The floor of
workshop Institute should be at least cemented.
 All the door, window, ventilator, gate, grill, railing of the institute should be
painted/polished.
 Keeping in view the escalating cost of land and non-availability of required land in
urban areas, metropolitan and other cities, the National Council for Vocational
Training (NCVT) deliberated and approved vertical expansion, with multi storied
design for workshop with a condition that trades with heavy machineries to be
housed only in the ground floor and remaining trades may be housed at any floor.
 Further, before housing any trade involving machineries at any floor other than
ground floor, a certificate regarding safety/suitability of structure to house that
trade from Civil/Structural Engineer would be necessary.
 It was also approved that as per building bye laws, building having more than
three floors. Provision of lift would be mandatory. It is also recommended by
NCVT that following trades requiring heavy machinery must be accommodated on
ground floor . However on the basis of the certificate by structural engineer these
trades can be allowed on the higher floors.
a) Welder,
b) Foundry man,
c) Mechanic Tractor,
d) Mechanic Diesel,
e) Mechanic Motor Vehicle,
f) Fitter,
g) Turner,
h) Machinist,
i) Sheet Metal Worker,
j) Carpenter,
k) Machinist Grinder,
l) Tool and Die Maker,
m) Building Constructor (Mason) &
n) Any other having single machinery weighing more than 200 kg

22
 All Government and Private ITIs need to set up an exclusive computer lab with
Internet connectivity on every computer with multimedia, anti-virus software,
latest operating software with UPS. The setup of the computer lab must have
minimum ten computers / workstations and peripheral with internet facility
irrespective of trade (s) or trade related computer requirement for an ITI up to
seating capacity of 100 per shift. For each additional unit accredited/ affiliated,
two computers / workstation must be added.
 The space norm to accommodate 10 computers for 100 trainees per shift is to be
25sq.m. and 2.5sq.m. for each additional computer.
 The space for Class Room, Principal Room, Staff Room, Drawing Room, Store
Room, Auditorium, Library, Dispensary, Playground, Verandah and Washing Room
etc., each should be available as mentioned in proposed norms .
 The minimum width of the all rooms except workshops shall be 3 meters
However for workshops minimum width is 05 meters.
 Building plan shall be approved by Town Planning Department/ District Magistrate
(Collector)/ Development Authority / Municipal Authority/ Any other Competent
Authority as per State government / UT.

Norms 2017

More Related Content

Similar to Norms 2017 (11)

Recently uploaded (20)

Norms 2017