Odd form feeder
Download as PPT, PDF2 likes1,092 views
The document discusses odd form feeders used for surface mount and through-hole components that cannot be placed automatically due to their shape or size. It details solutions such as vibrating feeders for LED lenses and radial taped feeders for SMT machines, highlighting their features and specifications. The aim is to enhance manufacturing efficiency, reduce defects, and adapt to various component types and packaging formats.
Odd form feeder
- 1. Odd Form Feeder www.smthelp.com Email: angela_kuo@126.com Skype ID: angela7140 MP: +86-139 23898396 Tel: +86-755-83203237 Fax:+86-755-23240492
- 2. Odd Form Definition Odd Component: Odd shape through-hole or surface mount components that cannot be automatically placed using standard pick and place assembly machines due to the component’s height, shape or weight. Odd Component Examples
- 3. Odd Form Trends – Drive to reduce defects – Increase throughput – Cost/availability of manual labor – Packages becoming available – Reduce cost of manufacturing
- 4. Odd Form Feeder Solutions Vibrating Feeder for LED lens Radial taped feeder for SMT solution
- 5. Odd Form Feeder Solutions Vibrating Feeder for LED lens Features: Vibratory bowl feeders are available for odd form bulk components. Like LED LENS, LED LIGHT, etc. Deal with mounter Each feeder can hold up to one different components. Vibrating Feeder can base on customer's requirement to special order. Odd Form Feeder deal with the placement or insertion of both surface mount and through-hole components.
- 6. Vibrating Feeder for LED lens Application Component Transport As a feeder,the vibration plate will feeding the component to the nozzle,after that nozzle will pick up the component and move to the board mount component finally. Pictures for reference only vibration plate
- 7. Simple to operate This feeder is full automatic running,all you need it just to control the speed speed controller
- 8. specification MODEL S-720 Dimension (L*W*H) 600*900*920mm Conveyor Height 900±20mm Power Supply Single Phase 220V, 50/60Hz Power Consumption 120W Air Supply no need speed >100pcs/min Net Weight 120KG https://youtu.be/FzlvGgDeBO8
- 9. Radial taped feeder for SMT Machine Application The radial feeder will feeding the radial component to the pick and place machine, then nozzle pick up the component and insert it to the PCB, completed mount component finally. Pictures for reference only
- 10. Radial taped feeder for SMT solution Features: For taped components, radial feeders are available. The radial feeder cuts the leads and presents the components accurately for pick up. Feeder quantity base on your mounter and your component. Feeders can be mounted both on the front and rear sides of the pick & place machine. Radial taped feeder for SMT Machine
- 11. Radial Components Two Package Types - Reels - Boxes – Known as “Ammo Packs” Two Standard Tape Pitches - 12.7mm is the most common. - 15mm is only on larger parts. Po Comment 12.7mm Standard – 90% of time 15 mm Larger Components Radial taped feeder for SMT Machine
- 12. Radial Components Components come in multiple Spans - Span is the distance between leads. - Dimension “F” seen -> - Other Lead spans are out there: 15mm, 2.0mm, 3.5mm, 6.5mm, etc. - Most typical lead spans are 2.5mm – LEDs, small Capacitors 5.0mm – Medium Capacitors, 7.5mm – Large Capacitors, MOVs, PTCs 10.0mm – Box Capacitors, High Voltage Capacitors. Radial taped feeder for SMT Machine
- 13. Radial Component Feeders 1. Whole Pick & Place Machine can install 10 pcs Insert Feeder. 2. - Different Feeder for 12.7mm and 15mm pitch tape. Feed wheel “teeth” need to match up with different pitch tape. - Different Feeder for different lead span ranges. 2.5mm to 7.5mm 5.0mm to 10mm
- 14. Component Feeders Real Application View - No difference in “reels” or “box” feeding. Radial taped feeder for SMT Machine https://youtu.be/yGbg7jmbaF0