Open Office Writer : Level2

access/open generic and/or non-generic files 􀀹 save files in appropriate format* 􀀹 􀀹 protect file(s) 􀀹 print a range of business documents 􀀹 produce a screen printout to evidence file protection 􀀹 archive files 􀀹 create a mail merge master Penalised under 1d insert merge codes in main document* 􀀹 􀀹 format mail merge documents 􀀹 create mail merge query 􀀹 perform mail merge* 􀀹 􀀹 import a text file* 􀀹 import a data file* 􀀹 Import an image* 􀀹 import a graph* 􀀹 􀀹 insert table 􀀹 set column widths 􀀹 set column/cell alignment 􀀹 apply gridlines and borders/shading 􀀹 enter text/numeric data in specified format 􀀹 􀀹 make amendments to document(s) 􀀹 use advanced search and replaceaccess/open generic and/or non-generic files 􀀹 save files in appropriate format* 􀀹 􀀹 protect file(s) 􀀹 print a range of business documents 􀀹 produce a screen printout to evidence file protection 􀀹 archive files 􀀹 create a mail merge master Penalised under 1d insert merge codes in main document* 􀀹 􀀹 format mail merge documents 􀀹 create mail merge query 􀀹 perform mail merge* 􀀹 􀀹 import a text file* 􀀹 import a data file* 􀀹 Import an image* 􀀹 import a graph* 􀀹 􀀹 insert table 􀀹 set column widths 􀀹 set column/cell alignment 􀀹 apply gridlines and borders/shading 􀀹 enter text/numeric data in specified format 􀀹 􀀹 make amendments to document(s) 􀀹 use advanced search and replace Creating the data source A data source is a database containing the name and address records (and optionally other information) from which a mailing list may be derived. Although you can create and print mailing labels and envelopes without using a data source, in most cases using one is the best approach. This chapter assumes that you are using a data source. OOo can access a wide variety of data sources, including spreadsheets, text files and databases such as MySQL, Adabas, and ODBC. If the information to be used in the mail merge is currently in a format that OOo cannot access directly, you need to convert it, for example by exporting it to a comma-separated values (CSV) file. For the following example we use a spreadsheet with the following column (field) headers: Title, First name, Last name, Address, State/County, Country, Post Code, Sex, Points. Registering a data source For a data source to be directly accessible from within an OOo document, it must first be registered as described below. Click File > Wizards > Address Data Source.2) Select the appropriate type of external address book—in this case, Other external data source. (The choices on this page of the wizard vary with your operating system.) Click Next. 3) On the next page of the Wizard click Settings. 4) In the Data Source Properties dialog, select the Database type (in this case, Spreadsheet). Click Next. 5) In the next dialog, click Browse and navigate to the spreadsheet that contains the address information. Select the spreadsheet and click Open to return to this dialog. At this time you may wish to test that the connection has been correctly established by clicking on the Test Connection button (not shown in illustration). 6) Click Finish. 7) In the following dialog, click Next. (Do not click Field Assignment.) 8) Name the file in the Location field. The default is ...\Addresses.odb; but you may replace Addresses with another name if you wish. You may also change the name in the “Address book name” field. In our example, the name “Points” was used for both. 9) Click Finish. The data source is now registered. Creating a form letter You can create a form letter manually, which is the simplest and most comprehensive method and is described here. If you elect to use the wizard, pay close attention to its current limitations, as identified within its description. 1) Create a new text document: File > New > Text Document, or open a pre-existing form letter with File > Open. 2) Display the registered data sources: View > Data sources (or press F4). 3) Find the data source that you wish to use for the form letter, in this case Points. Expand the Points and Tables folders, and select Sheet1. The address data file is displayed. 4) Now create or modify the form letter by typing in text, punctuation, line breaks, and so on that will be present in all of the letters, and adding fields where needed by clicking in the field heading and dragging to the appropriate point in the letter. Note that address lines should be in individual paragraphs, not separated by line breaks as might seem preferable. The reason for this will be made clear in the next step. 5) Continue until you have composed the entire document. At this time you may wish to consider suppressing any blank lines that may appear in the resulting letters. If not, skip ahead to Step 7. 6) To suppress blank lines: p) Click at the end of the first paragraph to be suppressed and then select Insert > Fields > Other. q) Select the Functions tab and then click on Hidden Paragraph in the Type column. r) Now click in the Condition box and enter the details of the condition that defines a blank address field. It has the general form of: ![Database.Table.Database field] where the ‘!’ (NOT) character indicates the negative case and the square brackets indicate the condition. For example, in our Points database the condition to test if the Company field is empty would be: ![Points.Sheet1.Company] as illustrated To test for multiple conditions use the operators AND and/or OR between the conditional statements, for example: ![Points.Sheet1.Title]AND![Points.Sheet1.Last Name] s) Click Insert, but do not close the dialog until you have amended all the lines that should be suppressed. The document is now ready to be printed. 1) Click File > Print and respond with Yes in the message box. 2) In the Mail Merge dialog (Figure 302), you can choose to print all records or selected records. To select records to be printed, use Ctrl+click to select individual records. To select a block of records, select the first record in the block, scroll to the last record in the block, and Shift+click on the last record. 3) Click OK to send the letters directly to the printer. If you prefer to save the letters to a file, perhaps to allow proofreading or some later formatting, select File in the output section of the Mail Merge dialog, instead of using the default Printer selection. This changes the dialog to display the Save merged document section, where Save as single document is pre-selected. You can choose to save each letter as a single, individual document, if preferred. In this case, clicking OK brings up the Save as dialog. Enter a file name for the saved letters. They will be saved consecutively in the single document, or numbered consecutively in individual files if saved as single documents. 4) If you have not saved the original, prototype form letter document (template) previously, then you should do so now. Having a form letter template could greatly simplify the creation of other form letters in the future and is highly recommended Graphics in Writer When you create a text document using OpenOffice.org (OOo) Writer, you may need to include some graphic illustrations. Graphics are added to textual documents for a wide variety of reasons: from supporting the description provided in the text—such as that used in this Guide—to providing an immediate visual impact of the contents, such as what is often found in a newspaper. Graphics in Writer are of three basic types: • Image files, including photos, drawings, scanned images, and others • Diagrams created using OOo’s drawing tools • Charts created using OOo’s Chart facility This chapter covers the first two types of graphic illustrations. Inserting an image from a file In the case where the image is already available in a file stored on the computer, it can be immediately inserted in the Writer document. OOo can import various vector (line drawing) and raster (bitmap) file formats. The most common are GIF, JPEG or JPG, PNG, and BMP. See “Graphic file types supported” for a full list of supported graphic file types. To insert an image from a file, proceed as follows: 1) Determine the destination for the image. Place the cursor at or near the appropriate location in the document. 2) On the main menu, select Insert > Picture > From File. 3) Navigate to the file to be inserted, select it, and click Open. Inserting images from other sources You can insert images from sources other than a file: • Graphics program • Scanner • OOo Gallery Graphics program You can use many different graphics programs to edit a graphic file. From these programs, you can select, copy, and paste an image or part of a graphic into an OOo document. Figure 251 shows an example of this procedure, which can be recreated with these steps: 1) In the graphic program window, select an area of the image to be copied. 2) Move the cursor over the selected area and press Control+C to copy. 3) Switch to the OOo Writer window. 4) Click to place the cursor where the graphic is to be inserted. 5) Press Control+V to paste the image. Scanner If a scanner is connected to your computer, OOo can call the scanning application and insert the scanned item into the Writer document page as an image. To start this procedure, place the cursor where the graphic is to be inserted and select Insert > Picture > Scan > Select Source. Although this practice is quick and easy, it is unlikely to result in a high-quality image of the correct size. You may get better results by scanning material into a graphics program and cleaning it up there before inserting the resulting image into Writer. OpenOffice.org Gallery The Gallery contains objects (graphics and sounds) that you can insert into your documents. The Gallery is available in all components of OOo. For an introduction to the Gallery, (Graphics, the Gallery, and Fontwork) in the Getting Started guide. To select a graphic from the Gallery and drag it into the document: 1) Click on the Gallery icon (located in the right side of the Standard toolbar) or choose Tools > Gallery. 2) Select the theme containing the image you want to insert. 3) Click on the image with the left mouse button, then drag and drop the image into the document. You can also right-click on the object and select Insert > Copy. Using the picture toolbar When you insert a suitable graphic image or select one already present in the document, the Picture toolbar appears. This toolbar can be either floating or docked. Figure below shows what the Picture toolbar looks like when it is floating. Two other toolbars can be opened from this one: the Graphic Filter toolbar, which can be torn off and placed elsewhere on the window, and the Color toolbar, which opens as a separate floating toolbar. From these toolbars, you can apply small corrections to the graphic or obtain special effects. Filters Table 5provides a short description of the available filters, however the best way to understand them is to see them in action. Feel free to experiment with the different filters and filters settings, remembering that you can undo all the changes by pressing Ctrl+Z or Alt+Backspace or by selecting Edit > Undo. Graphic filters and their effects Color Use this dialog box to modify the individual RGB color components of the image (red, green, blue) as well as the brightness, contrast, and gamma of the image. If the result is not satisfactory, you can press Control+Z to restore the default values. Setting the object transparency Modify the percentage value in the Transparency box on the Picture toolbar to make the image more transparent. This is particularly useful when creating a watermark or when wrapping the image in the background. Using the formatting toolbar and picture dialog When an image is selected, you can customize some aspects of its appearance using the tools available on the Formatting toolbar as well as in the dialog that is shown by right-clicking on the image and selecting Picture. You can, for example, create a border around the image, selecting style and color; or you can (in the Borders page of the Picture dialog) add a shadow to the image. Cropping images When you are only interested in a section of the image for the purpose of your document, you may wish to crop (cut off) parts of it. To start cropping the image, right-click on it and select Picture from the popup menu. In the Picture dialog box, select the Crop page In the Crop dialog box, you can control the following parameters: • Keep scale / Keep image size options: when Keep scale is selected (default), cropping the image does not change the scale of the picture. When Keep image size is selected, cropping produces enlargement (for positive cropping values), shrinking (for negative cropping values), or distortion of the image so that the image size remains constant. • Left, Right, Top, and Bottom: the function of these boxes changes according to the choice made between Keep scale and Keep image size. In both cases, when a value is entered in one of these boxes, the image is cropped by that amount. For example, a value of 3cm in the Left box will cut 3 cm from the left side of the picture. When Keep scale is selected, the size of the image also changes, so in this example the width will be reduced by 3 cm. If Keep image size is selected instead, the remaining part of the image is enlarged (positive values for cropping) or shrunk (negative values for cropping) so that the width and height of the image remains unchanged. Note that the Width and Height fields change as you enter the values when in this mode. Use the thumbnail next to these fields to determine the correct amount by which to crop. Resizing an image It is possible, and quite likely, that the inserted image will not fit perfectly into the document because it is too big or too small. In these cases you will need to resize the image. 1) Click the picture, if necessary, to show the green resizing handles. 2) Position the pointer over one of the green resizing handles. The pointer changes shape giving a graphical representation of the direction of the resizing. 3) Click and drag to resize the picture. 4) Release the mouse button when satisfied with the new size. The corner handles resize both the width and the height of the graphic object simultaneously, while the other four handles only resize one dimension at a time. Rotating a picture Writer does not provide a tool for rotating a picture; however, there is a very simple workaround: 1) Open a new Draw or Impress document. 2) Insert the image you want to rotate. You can use any of the mechanisms described in “Adding images to a document” on page 264, although there are some slight variations in the position of the menu entries and icons. 3) Select the image, then in the drawing toolbar (shown by default at the bottom of the window in Impress and Draw), select the Rotate icon . 4) Rotate the image as desired. Use the red handles at the corners of the picture and move the mouse in the direction you wish to rotate. By default the picture rotates around its center (indicated by a black crosshair), but you can change the pivot point by moving the black crosshair to the desired rotation center. Using Writer’s drawing tools You can use Writer’s drawing tools to create graphics, such as simple diagrams using rectangles, circles, lines, text, and other predefined shapes. You can also group several drawing objects to make sure they maintain their relative position and proportion. You can place the drawing objects directly on a page in your document, or you can insert them into a frame. You can also use the drawing tools to annotate photographs, screen captures, or other illustrations produced by other programs, but this is not recommended because: • You cannot include images in a group with drawing objects, so they may get out of alignment in your document. • If you convert a Writer document to another format, such as HTML, the drawing objects and the graphics will not remain associated; they are saved separately. In general, if you need to create complex drawings, it is recommended to use OpenOffice.org Draw, which includes many more features such as layers, styles, and so on. Creating drawing objects To begin using the drawing tools, display the Drawing toolbar , by clicking View > Toolbars > Drawing. If you are planning to use the drawing tools repeatedly, you can tear off this toolbar and move it to a convenient place on the window. To use a drawing tool: 1) Click in the document where you want the drawing to be anchored. You can change the anchor later, if necessary. 2) Select the tool from the Drawing toolbar. The mouse pointer changes to a drawing-functions pointer . 3) Move the cross-hair pointer to the place in the document where you want the graphic to appear and then click-and-drag to create the drawing object. Release the mouse button. The selected drawing function remains active, so you can draw another object of the same type. 4) To cancel the selected drawing function, press the Esc key or click on the Select icon (the arrow) on the Drawing toolbar. 5) You can now change the properties (fill color, line type and weight, anchoring, and others) of the drawing object using either the Drawing Object Properties toolbar or the choices and dialog boxes reached by right-clicking on the drawing object. Positioning graphics within the text When you add a graphic to a text document, you need to choose how to position the graphic with respect to the text and other graphics. The positioning of graphics is often rather time-consuming and may be very frustrating for both inexperienced and experienced users. As Writer is a word processor rather than a desktop publishing program, there are some limitations to the flexibility in positioning images and it takes time to get things exactly as you would like them. Starting from OpenOffice.org 3.0, this task is considerably improved by the inclusion of a new option that allows a “loose anchoring”. Positioning of a graphic is controlled by working on four areas: • Arrangement refers to the placement of a graphic on an imaginary vertical axis. Arrangement controls how graphics are stacked upon each other or relative to the text. • Alignment refers to the vertical or horizontal placement of a graphic in relation to the chosen anchoring point. • Anchoring refers to the reference point for the graphics. This point could be the page, or frame where the object is, a paragraph, or even a character. • Text wrapping refers to the relation of graphics to surrounding text, which may wrap around the graphic on one or both sides, be overprinted behind or in front of the graphic, or treat the graphic as a separate paragraph or character. The settings for each of the four control areas above can be accessed in a number of different ways depending on the nature of the graphics: 1) From the Format menu, where you can find Alignment, Arrange, Wrap, and Anchor (both for images and drawing objects). 2) By the pop-up menu displayed when right-clicking on the graphics. 3) From the Frame toolbar shown in Figure 259, for images with the Graphics frame style applied. 4) From the Type and Wrapping pages of the Picture dialog box for images. Note that you cannot control the arrangement using the dialog box. To open the Picture dialog box, click on the image to select it and then choose Format > Picture or right-click on the graphic and choose Picture on the pop-up menu. 5) From the Position and Size page of the Position and Size dialog box for drawing objects. To open the Position and Size dialog box, click on the drawing object to select it and then choose Format > Object > Position and Size or right-click on the graphic and choose Position and Size on the pop-up menu. Note that you can only control the alignment and anchoring. Arranging graphics Arranging a graphic object means to determine its vertical position relative to other graphic objects or text. Arranging is only relevant when objects are overlapping. You can choose between four settings, plus a special setting for drawing objects: Bring to Front: draws the graphic on top of any other graphics or text. • Bring Forward: brings the object one level up in the stack (zaxis). Depending on the number of overlapping objects, you may need to apply this option several times to obtain the desired result. • Bring Backward: the opposite of Bring Forward; sends the selected object one level down in the object stack. • Send to Back: sends the selected graphic to the bottom of the stack, so that other graphics and text cover it. • To Background / To Foreground: only available for drawing objects; moves the drawing object behind or in front of the text respectively.

Open Office Writer : Level2

More Related Content

What's hot (20)

Viewers also liked (7)

Similar to Open Office Writer : Level2 (20)

More from thinkict (20)

Recently uploaded (20)

Open Office Writer : Level2