Planet utm

Pathloss 4.0 MSI PLANET Terrain Database UTM Projection

MSI PLANET Terrain Data UTM Projection

Universal Transverse Mercator (UTM) Projection
The UTM projection divides the world into 60 zones or segments. Each zone covers 6 degrees of longitude.
The first zone starts at the international date line and the numbers increase eastwards. At the center of each
zone is a central meridian, which is the measurement reference for that zone.

East-west grid lines are attached to the central meridian at right angles and follow great circle paths away
from it. These are lines of constant northing and do not follow parallels of latitude, since parallels of latitude
are not great circles. Finally, north-south grid lines are draw as lines of constant easting.

UTM coordinates are relative to a particular zone number and are expressed as an easting or X coordinate
and a northing or Y coordinate. The easting is the distance from the central meridian along the east west
grid lines using a positive east negative west sign convention. To avoid negative numbers, a false easting
of 500,000 meters is assigned to the central meridian.

The northing is the distance from the equator along the north-south grid lines using a positive north - neg-
ative south sign convention. To avoid negative numbers in the southern hemisphere, a false northing of
10,000,000 meters is assigned to the equator. This false northing creates an ambiguity in this coordinate
system. Consider the UTM coordinates:

zone = 12, easting = 575 kilometers, northing = 5600 kilometers.
Using the WGS84 datum, this converts to:

latitude 50 32 49.64 N and longitude 109 56 29.12 W in the northern hemisphere
or
latitude 39 44 47.78 S and longitude 110 07 28.56 W in the southern hemisphere

To resolve this ambiguity, the Pathloss program adds the suffix N or S to the UTM zone. e.g. 12N or 12S.
This false northing introduces an additional complication when a terrain data base spans the equator. North-
ings of 20 and 9980 kilometers represent points 20 kilometers north and south of the equator respectively.

Planet Terrain Database Description
The Planet terrain database format consists of regular array of elevations. Each elevation represents the av-
erage elevation in a square cell. The file is arranged in rows running from west to east starting at either the
SW or NW corner of the file. Normally the elevations are stored as 2 byte integers. The byte order could
be INTEL (little endian) or SPARC (big endian)

The geo-referencing information is contained in two external files: an index file and a projection file.

An example of a projection file is given below. The format will vary depending on the projection. This ex-
ample denotes a UTM projection in zone 18 using the WGS84 datum.
WGS-84
18
UTM

Page 1 of 6

MSI PLANET Terrain Database UTM Projection Pathloss 4.0

The index file defines the edges of the terrain database and specifies the cell size. One entry is provided for
each file. An example of a line in an index file is given below.

toluca1.hgt 384000 484050 2080200 2180250 50

This is interpreted as
file name tolucal.hgt

west edge 384000 meters

east edge 48450 meters

south edge 2080200 meters

north edge 2180250 meters
cell size 50 meters
The east and west edges are the UTM eastings
and the north and south edges are the UTM
northings.

Geographic Defaults
The first step is to set the datum or ellipsoid to
correspond to the projection file. Select Config-
ure - Geographic Defaults. Set the grid coordi-
nate system (projection) to UTM.

Configuration
The Pathloss program uses a generic terrain database reader which was developed for the Logica Odyssey
file format. The Planet height files can be read directly. No file conversions are necessary. The setup pro-
cedure is described below:

Select Configure - Terrain Database and
then select Odyssey UTM.
Click the Setup Primary button to configure
the terrain database.

Set directory
Click the Set Directory button and point to
the directory (folder) containing the Planet data files.

Page 2 of 6


UTM zone methods
In many cases, terrain data is supplied in a
single file. The east and west edges may ex-
tend outside of the standard UTM zone bou-
daries. In these cases, the UTM zone must
be specified by either of the following two
methods:

Check the "Use specified index file" option
and then select the file from the dropdown
list. The UTM zone associated with the se-
lected file will be used and only the selected
file will be used even if the index contains
multiple files.
Check the “Use specified UTM zone” and enter the zone number suffixed by N or S. If N or S is not spec-
ified the zone will default to the northern hemisphere. The S suffix must be specified for the southern hem-
isphere
In all other cases use the “Use standard UTM zones in index” option.

Embedded building data
Normally an elevation is interpolated from the nearest four elevations to the point of interest. If the terrain
data contains embedded building or canopy data, check the “Embedded building data” option. The cell el-
evations will be used in this case.

Index
Click the Index button
to access the digital
map index. Data can be
entered manually. Se-
lect Edit- Add on the
Index menu bar and en-
ter the data as shown on
the next page. This information is available from the Planet index files. When the data entry is complete
Click OK

Page 3 of 6


Two additional fields must be set directly on the Grid data entry
form. There are:

Bottom up This field determines if the file starts in the south
west corner or the north west corner. Double click
on this field to change the setting to true of false.
If the network background or terrain view is up-
side down, then change this field.

Byte order The is equivalent to "big and little endian" Dou-
ble click on this field to change the field to
SPARC (big endian) or INTEL (little endian)

Import Index
A generalized text import feature can be custom-
ized to read Planet index files. Select Files - In-
dex to bring up the field definition dialog box.

Click the Planet button to obtain the default set-
tings for Planet indexes.

Note that the “Byte order” and “Bottom up” op-
tions may have to be experimentally determined.

Enter the UTM zone N or S suffix and check
“Zone number”. A Planet index does not include
the UTM zone number. If the UTM zone is in-
cluded in the index file, enter the field number
for the UTM zone and check the “Field number”
option.

The “Bytes per pixel setting is always 2 and the
Edge units are always meters for Planet

Click OK and load the Planet index file.

Page 4 of 6


Testing the Terrain Database Settings
This is best carried out in the Network mod-
ule. Create two sites at the south west and
north east corners of the extents of the terrain
database files. Refer to the index for the UTM
coordinates. Select Files - New to clear the
display. Select Site Data - Site List and then
select Edit - Add.

Enter the easting, northing and UTM zones.
The latitude will be automatically determined

When both sites are on the display, select Site
Data - Create background.

Select Site Data - Color 16° 20'
Legend and verify that the
NE
elevation range is reasona-
ble.
25'

30'

35'

40'

SW

16° 45'
68° 25' 20' 15' 10' 5' 68°

Possible Problems
The background is not generated

• The file names in the index file are not the same as the actual database files. The extensions may be
missing or different.
• The UTM zones in the index file are not correct or the N-S suffix is missing
• The UTM method is wrong. The zone is incorrectly specified or the N-S suffix is missing
• The SPARC - INTEL setting is wrong
• The map file directory is incorrectly set

Page 5 of 6


• The file contains “no data” elevations. These values are usually 9999 and the program will ignore
these.
The elevations are not correct or the display is incomplete

• The SPARC - INTEL setting is wrong
The display is upside down. This will be very apparent if the database has several vertical tiles
• The bottom - up setting in the index is wrong

Equatorial Considerations +20,000 10,020,000
Terrain databases which span the equator require
special consideration. Two index files are shown be-
20_1 20_2
low. Both of these consists of four terrain data files
covering an area of 20 kilometers by 20 kilometers.
Two of these files extend 20 kilometers above the
equator and the other two files extend 20 kilometers 0 Equator 10,000,000
below the equator.
The first index is referenced to the northern hemi- 20_3 20_4
sphere. The map edge northings are +20,000 meters,
0 and -20,000 meters. In this case, a northern hemi-
sphere UTM zone must be specified in both the in- -20,000 9,980,000
dex and the UTM zone method

Northern Hemisphere Reference
20_1.height 565000 585000 0 20000 20

20_2.height 585000 605000 0 20000 20
20_3.height 565000 585000 -20000 0 20
20_4.height 585000 605000 -20000 0 20

The second index is referenced to the southern hemisphere. The northing of the equator is 10,000,000 me-
ters.The map edge northings are 9,980,000 meters, 10,000,000 meters and 10,020,000 meters. In this case,
a southern hemisphere UTM zone must be specified in both the index and the UTM zone method
Southern Hemisphere Reference

20_1.height 565000 585000 10000000 10020000 20

20_2.height 585000 605000 10000000 10020000 20

20_3.height 565000 585000 9980000 10000000 20
20_4.height 585000 605000 9980000 10000000 20

Page 6 of 6

Planet utm

More Related Content

Similar to Planet utm (20)

More from Mounir Slimani (9)

Planet utm