pleskwindows92

Plesk 9.2 // Windows Server

Getting Started Guide

Plesk 9.2
for your Windows Server

AKJZNAzsqknsxxkjnsjx
Page 1


Getting Started Guide: Plesk 9.2, Windows Server

Version 2.1 (02.08.10)

© Copyright 2010. All rights reserved.

Distribution of this work or derivative of this work is prohibited unless prior written permission is obtained from the copyright holder.

Trademarks used in this book
Linux® is a registered trademark of Linus Torvalds.
Plesk® is a registered trademark of Parallels, Inc.
SSH® and Secure Shell® are trademarks of SSH Communications Security, Inc.
RedHat® and Fedora® are registered trademarks of Red Hat Software, Inc.
Mac® is a registered trademark of Apple Computer, Inc.
UNIX® is a registered trademark of The Open Group.
Windows XP®, Entourage®, and Outlook® are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
Thunderbird™ is an unregistered trademark of the Mozilla Foundation.

All other trademarks and copyrights are the property of their respective owners.

Page 2


Table of Contents
Introduction 5
SECURITY INFORMATION
5

REPROVISIONING YOUR SERVER
6

GETTING HELP
7

OTHER RESOURCES
9

Setting Up Your Dedicated Server 10
CHOOSING A HOST NAME, USER ID, AND PASSWORD
10

LOGGING IN TO YOUR MANAGER FOR THE FIRST TIME
13

Connecting to Your Dedicated Server 14
CONNECTING TO YOUR SERVER USING PLESK
15

CONNECTING TO YOUR SERVER USING REMOTE DESKTOP CONNECTION (RDC)
18

CLOSING YOUR REMOTE DESKTOP CONNECTION
20

Page 3


Adding a Domain to Your Server 21
LOGGING IN TO PLESK
22

STEP 1 - CREATING A CLIENT IN PLESK
22

STEP 2 - CREATING A NEW DOMAIN IN PLESK
24

Setting Up DNS for Your Domains 27
STEP 1 - CREATING A ZONE FILE FOR YOUR DOMAIN
27

STEP 2 - CREATING AND REGISTERING YOUR DOMAIN HOSTS
28

STEP 3 - ASSIGNING THE NAME SERVERS TO YOUR DOMAIN
29

STEP 4 - MODIFYING THE ZONE FILE FOR YOUR DOMAIN
31

ACCESSING YOUR DOMAIN USING FTP (UPLOADING FILES)
33

Setting Up Email on Your Server 34
USING PLESK TO SET UP AN EMAIL ACCOUNT
34

ACCESSING YOUR ACCOUNT WITH AN EMAIL CLIENT
36

USING WEBMAIL TO ACCESS YOUR EMAIL
37

Page 4


Introduction
Unlike normal hosting plans, which put many customers' accounts on a single server, a server is
reserved exclusively for the account and use of a single customer. This means that you have
exclusive rights to the server's bandwidth, memory, and storage space.
When you purchase a server, you actually lease a server box that remains at our data centers,
which you can conﬁgure and set up according to your preferences.

Assisted Service Plan is a server option that shifts the responsibility of setup, monitoring,
maintenance, security, and patching of your server to our server support team.

Dedicated servers on an Assist Service Plan do not have root/system-level access, but we allow
control over all other aspects of the server. The Plesk control panel is installed for advanced
server management tasks.

SECURITY INFORMATION
Compared with shared hosting, a server offers more power and more versatility. You can run and
install virtually anything on your server. However, with this added control comes added
responsibility.
You are responsible for the security, backup, and maintenance of your server, unless you
have purchased an Assisted Service Plan and/or Managed Backup Services.

Page 5


CAUTION! Remember to keep your administrative password secure. Anyone who
has administrative access to your server can manipulate the software and content
that runs on your server.

Unless you have Managed Backup Services with your server, we do not automatically back up
your server. We do, however, offer an FTP backup service with our server accounts. For more
information about our FTP backup service, please visit our website.

You can also purchase a hardware firewall for your server from us. You can use a hardware
firewall to control the traffic to and from your server. For more information about our firewall
service, please visit our website.

REPROVISIONING YOUR SERVER
If, at any time, you want to revert to a clean setup on your server, you can reprovision it.
Reprovisioning erases all of the content on your server’s hard drive. Your server resets to its
state at the time you first purchased it.

You can reprovision your server by using the Hosting Control Center.

Page 6


To Reprovision Your Server

1. Log in to your account.

2. Under the My Products section, select Servers.

3. Click Launch Manager next to the server you want to reprovision. The Hosting Control
Center opens.

4. Under the Support section, click Reprovision Server. The Reprovision Server page displays.

5. If you choose to, enter a new host name and user name. These values default to the current
host name and user name for the account.

6. Enter and confirm a new password, and then click Continue.

You receive a confirmation notice once your server is reprovisioned and ready to go. Typically,
this takes less than five hours.

GETTING HELP
After you set up your server, you can easily get help by submitting a trouble ticket or initiating a
chat session in the Hosting Control Center. Alternatively, you may contact Customer Support
directly.

Page 7


To Open a Trouble Ticket



3. Click Launch Manager next to the server account that you want help with.

4. In the Hosting Control Center, under Support, click Trouble Tickets.

5. Enter your contact information, including an email address and phone number.

6. Under Trouble Ticket Description, enter a summary and a detailed description of your issue.

7. Click Continue.

8. Review your trouble ticket information and click Submit.

To Open a Chat Session



3. Click Launch Manager next to the server account that you want help with.

4. In the Hosting Control Center, (in the top-right corner of the window) click Chat Now!

Page 8


OTHER RESOURCES
Use these resources to learn more about managing your server:

Plesk Manuals http://www.parallels.com/products/plesk/resources/
You can ﬁnd user manuals and Flash tutorials on Parallels’
website.

Windows Server 2003 Web and http://support.microsoft.com/winsvr2003webap
Application Services Technology
This is the main support page for Windows Server 2003.
Center
From here, you can ﬁnd information about IIS and Web
applications.

Page 9


Setting Up Your Dedicated Server
Once you have purchased your server and we’ve worked on the initial configuration, you need to
log in to your Hosting Control Center to finish setting things up.

The Hosting Control Center is an easy place for you to set up your server’s host name, user ID,
and password. You can also use it to schedule server maintenance, reprovision your server, view
bandwidth stats, request additional IPs, and submit trouble tickets.

CHOOSING A HOST NAME, USER ID, AND PASSWORD

Servers with Assisted Service Plan require you to supply additional information,
including the domain name you’re using for your website’s hosting or the email
address for receiving server correspondence.

When setting up your server, you create a host name, user ID, and password for your server. This
is the user ID and password that you will use to connect to your server in the future. It’s a good
idea to have this material ready when you log in for the first time.

Page 10


Choosing a Host Name

The server’s host name (also known as your account name) is a unique name for your server. If
you have multiple servers, the host names help you differentiate among them.

A host name can be anything, as long as it:
• Contains 3-15 characters.

• Starts with a letter.

• Only includes letters, numbers, periods, or a hyphen.

• Does not start or end with a period or hyphen.

• Does not include any spaces or any other special characters.

Choosing a User ID

A user ID is the primary ID that you use to access your server. This is also the user ID you use to
access your server with Remote Desktop Connection.

Your user ID can be between 4 and 32 lowercase alphanumeric characters. Your user ID cannot:
• Begin with a number

• Contain spaces, symbols, or capital letters

Page 11


You cannot use the following reserved terms as a user ID:

adm binftp halt nobody rpc system
admin body iusrlp nscdntp rpcuserrpm uucp

administrator games mailnull operator smmsp vcsa
anonymous gopher news pcap sshd

backup guest nfsno root sync

Choosing a Password for Your Server

Your server’s password, along with your user ID, is used to connect to or gain root access to your
server. Keep in mind that Assisted Service Plan servers do not allow root access.
To ensure your server is kept secure, your password must:

• Contains 7-14 characters

• Includes lowercase letters, uppercase letters, and numbers

• Not begin with a number or symbol

• Not contain backslashes, colons, single quotes, double quotes, spaces, ampersands (&), or
the caret symbol (^)

• Not contain your user name

Page 12


LOGGING IN TO YOUR MANAGER FOR THE FIRST TIME
Once you’ve selected a host name, user ID, and password for your server, you can log in to your
Hosting Control Center and ﬁnish setting it up.

To Finish Setting Up Your Dedicated Server Account



3. Next to the server account you want to set up,
click Set up Account.
!
4. On the Account Setup page, enter the host
name for your server account.

5. Enter your user name and password for your account.

6. Click Continue.

7. Conﬁrm your settings and click Submit.

Once you click Submit, your server should be ready to use in approximately 12 hours. You
receive an email message once it is ready.

Page 13


Connecting to Your Dedicated Server
In general, there are two ways you can connect to your server. You can use a web-based
interface such as Plesk, or you can connect directly to your server using the Remote Desktop
Connection (RDC). Servers with Assisted Service Plan have a Plesk control panel installed by
default.

Either way, you connect to your server using your server’s IP address, the user ID, and the
password you specified when you set up your account. If you are connecting to your account
using Plesk and did not purchase Assisted Service Plan, log in with the user ID “admin” instead of
the user ID you specified when you set up your account. Assisted Service Plan customers should
use their user IDs.

To find the IP addresses for your server, log in to your Hosting Control Center. The Hosting
Control Center lists the IP address for your server on the first page you see after you log in.

Depending on how you configured your server, you might have multiple IP
addresses. You can use any of them to connect to your server.

Page 14


CONNECTING TO YOUR SERVER USING PLESK
Plesk is a Web-based control panel that you can use to manage your server. More specifically,
you can use Plesk to set up your domain, DNS, and email on your server.

Make sure you have your IP address ready before you try to log in to Plesk. You’ll need to use
your IP address to access Plesk on your server. You can find your server’s IP address in the
Hosting Control Center.

This procedure explains how to log in to Plesk for the first time and includes some post-
installation steps. You only need to perform these steps once.

To Access Your Dedicated Server Using Plesk

1. Open a Web browser and go to:

https://ipaddress:8443/ (ipaddress is your server’s IP address).

2. When the Plesk login screen displays, enter admin as your user name and enter the password
you defined when you set up your server account.

3. Read and accept the Parallels End-User License Agreement.

4. The post-installation configuration page displays. In the Full hostname field, you can leave
the default hostname that Plesk created for you, or you can enter your own fully qualified
domain name. For example: host.coolexample.com.

Page 15


5. You can keep the default settings for the Select shared IP addresses. Plesk automatically fills
in these fields based on your server and account information.

6. Under the Shared IP addresses section,
select the primary IP address for your
server in the list of Exclusive IP
addresses, and click Shared >>. If you
do not plan to host multiple domains on
your server, you can skip this step.

7. Enter a password to use with the Plesk
admin user. You can use the same
password that you used to log in
initially or create something new.

8. Click OK to finish the post-installation
configuration and log in to Plesk.

Page 16


The administrator
interface looks like
this when you log in
to Plesk for the ﬁrst
time.

This is the main
dashboard that you
use to manage and
monitor your server.
From here, you can
create new domains
and email accounts,
manage IP addresses,
and start and stop
services on your
server.

Plesk has features to help you manage your server. To find out more about Plesk and
the other features not covered in this guide, visit the Parallels website at:
http://www.parallels.com/products/plesk/resources/

Page 17


CONNECTING TO YOUR SERVER USING REMOTE DESKTOP
CONNECTION (RDC)
The Remote Desktop Connection feature in Windows XP lets you connect directly to your server.
When you connect to your server using RDC, you create a virtual desktop to that server.

Remote Desktop Connection creates an environment very similar to Windows XP with a Start
Menu, Windows Explorer, and many of the other features you are already familiar with in
Windows.

Remember, before you log in to your server, make sure you have your IP address
ready. You’ll need to use your IP address to access your server. You can find the IP
address to your server in the Hosting Control Center.

To Access Your Server Using Remote Desktop Connection

1. From the Start Menu in Windows XP, select All Programs > Accessories >
Communications > Remote Desktop Connection.

2. In the Computer ﬁeld, enter the IP address of your
server. You can ﬁnd your IP address in your Hosting
Control Center.

Page 18


3. Click Connect.

4. Enter your User name and Password.
This is the user ID and password you
created when you set up your account.

Once you log in, you can manage your
server the same way you would in a typical
Windows environment. You can access Internet Information Services (IIS) through the Windows
Control Panel and launched programs using the shortcuts on your desktop.

This is an example of what your server looks like when you log in for the ﬁrst time using RDC:

For more information about Remote Desktop Connection, visit:
http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx

Page 19


CLOSING YOUR REMOTE DESKTOP CONNECTION
Your Windows server times out after ﬁve minutes if RDC is shut down without logging off, or
after 15 minutes of inactivity. Unfortunately, you can’t change the default session time out
setting.
If you plan to access your server again soon using RDC, remember to log off instead of simply
closing the window. If you close the window, you must wait ﬁve minutes before you can log in to
your server again.
To log off of your server using RDC, select Start > Log Off in the Remote Desktop window.

Page 20


Adding a Domain to Your Server
As you might already know, a domain name works a lot like an address forwarding service.
All of your website content is on a computer with a unique address, your IP address. This is the
same IP address that you use to connect to your server using Plesk. Your domain name directs
visitors to your site using this IP address.

Before you set up a domain to host on your server, make sure you have already registered that
domain through an accredited domain registrar.
To make the connection between domain name and IP address work, you need to ﬁrst set up a
domain and hosting on your server using Plesk. This section of the guide walks you through the
necessary steps:

• Step 1 - Creating a Client in Plesk

• Step 2 - Creating a New Domain in Plesk

Page 21


LOGGING IN TO PLESK
There are two ways to access the Plesk control panel on your server. You can log in to the
Hosting Control Center and click the Launch Plesk icon, or you can go to:

https://ipaddress:8443/ (ipaddress is your server’s IP address).

STEP 1 - CREATING A CLIENT IN PLESK
Before you add a domain to your server, you need to create a client in Plesk. All domains in Plesk
have to be associated with a client, or user, other than admin.

You can use one client to set up multiple domains on your server.

To Create a Client in Plesk

1. Log in to Plesk using admin for your Login and the password you created when you logged in
to Plesk for the ﬁrst time.

2. If this is the ﬁrst time you have logged in to Plesk, you’ll need to read and agree to the
Parallels End-User License Agreement, and set up a new admin password for Plesk.

3. From the menu on the left, select Clients.

4. Click Add New Client Account.

Page 22


5. To create a new client account, enter a
Contact name, Login, and Password.
The other ﬁelds on this page are
optional.

6. Click Next.

7. The next screen lets you limit the
Resource Usage of the client. The
default settings are typically acceptable
unless you are reselling space on your
server and allowing customers to
manage their domains.

8. The next screen will allow you to set
permissions for the client. Click Next.

9. To associate this client with a new
domain, you need to associate your
client with an IP pool. From the list of
Vacant IPs, select an IP and add it to
the Client’s IP Pool. Click Next.

10.Click Finish.

Page 23


STEP 2 - CREATING A NEW DOMAIN IN PLESK
After you set up a client in Plesk, you can create your new domain. If you have not set up a client
in Plesk already, see the previous section, Step 1 - Creating a Client in Plesk. The following
example will setup the domain with hosting. It is also possible to set up the domain as a
forwarding domain or without hosting. Hosting can be conﬁgured for any domain after the initial
setup from Domains -> (domain name) -> Web Hosting Settings.

To Add a New Domain in Plesk

1. If you are not already logged in to Plesk, log in using admin for your login and the password
you created when you logged in to Plesk for the ﬁrst time.

2. From the menu on the left, select Clients.

3. Select the client you want to create the domain for. In this case, we are going to select the
client that we created in Step 1 - Creating a Client in Plesk.

4. Click Domains.

Page 24


5. Click Create Domain. The Create Domain screen displays.

6. Select the checkbox next to
WWW. in the Domain name
field, enter a valid domain
name (for example,
coolexample.com). Keep the
default settings for the Use
domain template settings
and Assign IP address fields.

7. Enter an FTP Login and
Password for this domain.

8. Click Next. The next page
allows you to further define
the hosting for the domain.

9. If you want to set limits for
the domain, you may do so
from the Limits screen.

10.Click Finish.

You can now access the directory for your domain and upload files using Plesk. However, to
view your website online, you need to configure the DNS for your site.

Page 25


The next section of this guide, Setting Up DNS for Your Domains, walks you through DNS setup.
Once you conﬁgure the DNS for your site, you can FTP into your website hosting directory in the
same way that you would with a traditional hosting account.

Plesk has features to help you manage your server. To find out more about Plesk and
the other features not covered in this guide, visit the Parallels website at:
http://www.parallels.com/products/plesk/resources/ .

Page 26


Setting Up DNS for Your Domains
Nameservers are the Internet’s equivalent to a phone book. A nameserver maintains a directory
of domain names that match certain IP addresses.

This makes it possible for people across the Internet to access your website using a familiar
domain name, instead of having to remember a series of numbers.

This section of the guide walks you through setting up your server as the nameserver for your
domain and covers the procedure for assigning this nameserver to your domain.
After you set up your DNS, it can take up to 48 hours before your domain resolves to your IP
address. This period is referred to as the propagation period.

We do not directly control the propagation period for your domain. While it should
take no more than 48 hours, we cannot guarantee this time frame.

STEP 1 - CREATING A ZONE FILE FOR YOUR DOMAIN
To use your server as a nameserver, all of the domains on your server must have a zone file,
which is the file that maps your IP address to your domain name. This is easy because Plesk
automatically creates a zone file for any domain you set up.

If you have not set up your domain in Plesk, see Adding a Domain to Your Server.

Page 27


STEP 2 - CREATING AND REGISTERING YOUR DOMAIN HOSTS
Once you set up a domain and create a zone ﬁle in Plesk, you need to create and register two
domain hosts for your domain. If your domain is registered with us, you can log in to your
account manager to complete this step.
If your domain name is registered with another company, you need to contact them for
instructions regarding domain host registration.

To Register Your Domain Hosts


2. Under the My Products section, select Domain Manager.

3. Click the domain name you’re going to host on your server. In this example, we’ll use
coolexample.com.

4. On the bottom-left of the page under Host Summary, click Add.

Page 28


5. Enter a Host name for each
domain host. This preﬁx
can be anything that is easy
for you to remember, like
NS1 and NS2 (NameServer1
and NameServer2). You will
need to create two host
records.

6. Enter the Host IP – your
server’s IP address. You can
ﬁnd the IP address for your server in the Hosting Control Center.

7. Click OK and repeat these steps to create another host for NS2.

These domain hosts can be used for other domains hosted on your server. You do not need to
create new domain hosts for each of your domains.

STEP 3 - ASSIGNING THE NAME SERVERS TO YOUR DOMAIN
Now that you created and registered two domain hosts, you need to change the information for
your domain to use these new servers. If your domain is registered with us, you can log in to
your account manager to complete this step.

Page 29


If your domain name is registered with another company or you manage the DNS for your
domains with a third-party tool, you’ll need to contact them for information about assigning
nameservers to your domain.

To Assign the Name Servers to Your Domain


2. Under the My Products section, select Domain Manager.

3. Click the domain name you want to host on your server.

4. Under Name Servers click Manage.

5. Choose I host my domains
with another provider. For
Nameserver 1 and
Nameserver 2, enter the
names of the domain hosts
you created previously. In
this example, we’re using
ns1.coolexample.com and
ns2.coolexample.com.

6. Click OK.

Page 30


STEP 4 - MODIFYING THE ZONE FILE FOR YOUR DOMAIN
Now that you have created and applied custom nameservers to your domain, the zone file will
need to be updated. For this example, we will continue with coolexample.com. Log in to Plesk.

To Update Your Zone File in Plesk

1. Click Domains.

2. Choose your domain and click
DNS Settings.

3. This is your domain’s zone
file. You will need to modify
the A and NS records for
ns.coolexample.com. These
will be changed to NS1 to
match your first nameserver.
(You need to create new A &
NS records the NS2
nameserver.)

4. Click on the record to modify
it. Make the desired changes and click OK.

Page 31


5. To add a record, click Add Record from
the DNS Settings page. Make sure to add
both an A Record type and a NS Record
type.

When complete, you should have two NS
records (ns1 & ns2) and two corresponding
A records (mapping ns1 & ns2 to your server
IP). Once you have veriﬁed the settings are
correct, click Update to save your changes.

When you’re done, your changes should look something like this:

Page 32


ACCESSING YOUR DOMAIN USING FTP (UPLOADING FILES)
After you set up your DNS, it can take up to 48 hours before your domain resolves to your IP
address. This period is referred to as the propagation period.

Once your domain resolves, you will see the default Plesk index page when you type your domain
name into a browser.
This is an example of
the default Plesk
index page.

When this page
displays, you can
connect to the
hosting account for
your domain using
FTP or through Plesk
to upload ﬁles to
your website.

To make your web pages viewable, upload them to the “httpdocs” directory in your
hosting account. This directory is the root directory for your website.

Page 33


Setting Up Email on Your Server
Once you have set up your domain and hosting, setting up email accounts in Plesk only takes a
few steps.

If you followed the procedure in the previous section of this guide to set up your
domain’s DNS, you do not need to modify your MX records to set up email accounts
in Plesk.

USING PLESK TO SET UP AN EMAIL ACCOUNT
The easiest way to set up an email account for a domain on your server is using the Plesk control
panel.

To Set Up Email Accounts for Your Domain in Plesk

1. If you’re not already logged in to Plesk, log in using admin for your login (or the login you
deﬁned during account set up, if you’re an Assisted Service Plan user) and the password you
created when you logged in to Plesk for the ﬁrst time.

2. From the menu on the left, select Domains.

Page 34


3. From your list of domains,
click the domain name that
you want to set up an email
account for. In this example,
we set up an email account for
coolexample.com.

4. Click the Mail Accounts icon
on the Domain administration
page.

5. The Mail Name Overview page
displays. In the Tools section,
click Create mail account.

6. Enter a Mail name for this
email account. In this
example, we’ll create an
account for Admin
(admin@coolexample.com). Click Finish when you are done.

Now, you can further customize the settings for this account from within Plesk or connect to
your account using an email client or Webmail.

Page 35


ACCESSING YOUR ACCOUNT WITH AN EMAIL CLIENT
To access your email account using an email client, such as Outlook®, Thunderbird™, or
Entourage®, you need this information:

User Name The name of the email account you created in Plesk, for example:
admin@coolexample.com.

Password The password you speciﬁed in Plesk when you set up your email account.

POP3 mail.coolexample.com (coolexample.com is your domain name).

SMTP Setting mail.coolexample.com (coolexample.com is your domain name).

The outgoing (SMTP) server requires authentication and uses the same
user name and password as the incoming (POP3) server

For more information about setting up mail accounts in Plesk, you can look at the Plesk
documentation on Parallel’s website.

Page 36


USING WEBMAIL TO ACCESS YOUR EMAIL
Instead of accessing your email using a traditional email client, you can access your email on the
Web using a standard Web browser.

If you have Webmail enabled in Plesk, you can access your email at:

http://webmail.coolexample.com (coolexample.com is your domain name).

Log in to your account using the user name and password you set up in Plesk or provided to you
by your administrator.

Page 37

pleskwindows92

More Related Content

What's hot (20)

Similar to pleskwindows92 (20)

More from webhostingguy (20)

pleskwindows92